ZH
RU
ES
Metal flow line detection method
Metal flow line detection method, Total:382 items.
In the international standard classification, Metal flow line detection method involves: Electrical and electronic testing, Non-destructive testing, Testing of metals, Welding, brazing and soldering, Medical equipment, Metalliferous minerals, Jewellery, Food products in general, Powder metallurgy, Iron and steel products, Wastes, Shipbuilding and marine structures in general, Construction materials, Metrology and measurement in general, Mechanical testing, Non-metalliferous minerals, Soil quality. Pedology, Insulating materials, Non-ferrous metals, Rubber, Veterinary medicine, Surface treatment and coating, Aerospace electric equipment and systems, Ferrous metals, Corrosion of metals, Analytical chemistry, Fluid storage devices, Electrical wires and cables, Products of the textile industry, Nuclear energy engineering, Cutting tools, Valves, Farming and forestry, Elements of buildings, Miscellaneous domestic and commercial equipment, Electrical accessories, Semiconductor devices, Water quality, Products of the chemical industry, Production of metals, Measurement of fluid flow, Road vehicle systems, Springs, Fluid power systems, Lifting equipment, Pipeline components and pipelines, Organic chemicals, Adhesives, Products of non-ferrous metals, Protection against fire, Linear and angular measurements, Fuels, Paint ingredients, Electricity. Magnetism. Electrical and magnetic measurements, Continuous handling equipment, Mining equipment, Structures of buildings, Electrical engineering in general, Dentistry, Materials for aerospace construction.
Taiwan Provincial Standard of the People's Republic of China, Metal flow line detection method
- CNS 11400-1985 Method of Eddy Current Test for Metal Bars Rods and Wires
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Metal flow line detection method
- GB/T 26642-2011 Non-destructive testing.Test method for computed radiography of metallic materials
- GB/T 12605-2008 Non-destructive testing.Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes
- GB/T 18043-2000 Precious metal jewellery content non-damaged test method X-ray fluorescence spectrometry
- GB/T 41978-2022 Additive manufacturing—Test method for hollow particle ratio of metal powders
- GB/T 16921-1997 Measurement of metallic coating thickness X-ray spectrometric methods
- GB/T 8360-1987 The lattice constant determination of metals--Method of X-ray diffractometer
- GB/T 8654.8-1988 Methods for chemical analysis of manganese metal--The infrared absorption method for the determination of carbon content
- GB/T 8654.10-1988 Methods for chemical analysis of manganese metal--The infrared absorption method for the determination of sulfur content
- GB/T 4702.14-1988 Methods for chemical analysis of chromium metal--The infrared absorption method for the determination of carbon content
- GB/T 4702.16-1988 Methods for chemical analysis of chromium metal--The infrared absorption method for the determination of sulfur content
- GB 4702.14-1988 Metal Chromium Chemical Analysis Method Infrared Absorption Method Determination of Carbon Content
- GB/T 18182-2000 Acoustic emission examination and evaluation of metallic pressure vessels
- GB/T 18182-2012 Acoustic emission examination and evaluation of metallic pressure vessels
- GB/T 23600-2009 X-ray real-time radioscopic testing method for magnesium alloy castings
- GB/T 17593-1998 Textiles--Test method of heavy metal ions--Atomic absorption spectrophotometry
- GB/T 41739-2022 Test method for dimensional stability of metal matrix composites—Thermal-cold cycling method
- GB/T 12968-1991 Eddy current decay method for measurement of resistivity and residual resistance ratio of pure metals
- GB/T 15072.3-2008 Test method of precious metal alloys.Determination of platinum content for gold,platinum and palladium alloys.Electricity titration using potassium permanganate
- GB/T 15072.6-2008 Test method of precious metal alloys.Determination of iridium contents for platinum,palladium alloys.Electricity titration with ferrous sulfate
- GB/T 32544-2016 Acoustic emission examination and evaluation methods of steel structures of bridge and gantry cranes
- GB/T 20935.2-2009 Method of electromagnetic acoustic inspection for metal materials.Part 2:Standard practice for ultrasonic testing using electromagnetic acoustic transducer(EMAT)techniques
- GB/T 20935.3-2009 Method of electromagnetic acoustic inspection for metal materials.Part 3:Standard test method for ultrasonic surface examinations using electromagnetic acoustic transducer(EMAT)techniques
- GB/T 26303.2-2010 Measuring method for dimensions and shapes of wrought copper and copper alloy.Part 2: Rod, wire and profile
- GB/T 12690.7-1990 Neodymium and neodymium oxide--Determination of lanthanum oxide, cerium oxide, praseodymium oxide, samarium oxide, yttrium oxide contents--X-ray fluorescence spectrometric method
HU-MSZT, Metal flow line detection method
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Metal flow line detection method
- GB/T 35385-2017 Non-destructive testing—Practice for electromagnetic (eddy-current) sorting of ferrous metals
- GB/T 35393-2017 Non-destructive testing—Practice for electromagnetic (eddy-current) sorting of nonferrous metals
- GB/T 34644-2017 Eddy current testing method for zirconium and zirconium alloy tube
- GB/T 33207-2016 Non-destructive testing—Test method for the accumulation of oxide scale in the metal tube in service by magnetic testing
- GB/T 20935.2-2018 Metal materials—Method of electromagnetic acoustic inspection—Part 2: Standard practice for ultrasonic testing using electromagnetic acoustic transducer (EMAT) techniques
- GB/T 31566-2015 Metallic coatings—Physical vapour-deposited coatings of aluminium—Specification and test methods
- GB/T 20935.3-2018 Metal materials—Method of electromagnetic acoustic inspection—Part 3: Standard practice for ultrasonic surface examinations using electromagnetic acoustic transducer (EMAT) techniques
- GB/T 20935.1-2018 Metal materials—Method of electromagnetic acoustic inspection—Part 1: Standard guide for electromagnetic acoustic transducers (EMATs)
American Society of Mechanical Engineers (ASME), Metal flow line detection method
工业和信息化部, Metal flow line detection method
- JB/T 13471-2018 Non-destructive testing method for online electromagnetic monitoring of metal abrasive particles in oil
- HG/T 6114-2022 Rapid detection method for heavy metals in waste acid: energy-dispersive X-ray fluorescence spectrometry
- YS/T 1130-2016 Method for detecting welding cracks in sintered metal porous materials
- YB/T 4143-2019 Inspection method for uniformity determination of solid metals using spark source atomic emission spectrometry
- YS/T 3041.1-2021 Calibration method for determination of silver content in metal ores, concentrates and corresponding materials by fire assay method Part 1: Full-process recovery method
Professional Standard - Ferrous Metallurgy, Metal flow line detection method
- YB/T 127-2014 Ferrous metals-testing methods for electromagnetic (eddy-current) sorting
- YB/T 127-1997 Ferrous metals.Testing methods for electromagnetic (eddy-current ) sorting
- YB/T 5337-2006 Determination method of metal lattice constant X-ray diffractometer method
国家市场监督管理总局、中国国家标准化管理委员会, Metal flow line detection method
- GB/T 39789-2021 Non-destructive testing of welds—Eddy current-video integrated testing method of metal composites weld
- GB/T 36984-2018 X-ray CT testing method of the porous metal materials for surgical implant applications
- GB/T 39794.2-2021 Test method for wind uplift resistance of mental roof—Part 2: Dynamic pressure method
- GB/T 39794.1-2021 Test method for wind uplift resistance of metal roof—Part 1 :Static pressure method
- GB/T 41058-2021 Methods for detecting heavy metals in sludge and contaminated soil for cement kiln coprocessing
- GB/T 39897-2021 Determination of volatile organic compounds and aldehydes and ketones in nonmetallic parts of vehicles
- GB/T 38719-2020 Metallic materials—Tube—Determination of biaxial stress-strain curve of tube by hydro-bulging test
- GB/T 38684-2020 Metallic materials—Sheet and strip—Biaxial stress-strain curve by means of bulge test—Optical measuring systems
Professional Standard - Aviation, Metal flow line detection method
- HB 5374-1987 Method for measuring galvanic current of different metals
- HB 5488-1991 Method for determination of stress-strain curve of metallic materials
- HB 5441.6-1989 Performance testing of powder metallurgy products and powders Test methods for fluidity of metal powders
Japanese Industrial Standards Committee (JISC), Metal flow line detection method
- JIS T 0304:2002 Testing method for metal release from metallic biomaterials
- JIS Z 2285:2003 Measuring method of coefficient of linear thermal expansion of metallic materials
- JIS G 0568:2006 Eddy current testing method for steel products by encircling coil technique
- JIS K 0102-3:2022 Testing methods for industrial water and industrial wastewater -- Part 3: Metals
- JIS H 7805:2005 Method for crystallite size determination in metal catalysts by X-ray diffractometry
- JIS K 6848-2:1999 Adhesives -- Testing methods of bonding strength of adhesives -- Part 2: Guidelines for the surface preparation of metals
CH-SNV, Metal flow line detection method
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Metal flow line detection method
- PREN 2002-16-1989 Aerospace Series Test Methods for Metallic Materials Part 16: Method for Penetrant Flow Detection
- PREN 2002-20-1996 Aerospace Series Test Methods for Metallic Materials Part 20 : Eddy Current Testing of Circular Cross-Section Tubes (Edition P 1)
- PREN 2002-16-1999 Aerospace Series Metallic Materials Test Methods Non-Destructive Testing Part 16: Penetrant Testing (Edition P1)
- PREN 2002-16-2000 Aerospace Series Metallic Materials Test Methods Part 16: Non-Destructive Testing Penetrant Testing (Edition P 1)
- PREN 3718-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Tubes (Edition P 1)
- PREN 3877-1997 Aerospace Series Metallic Materials Test Method Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis of Braze Alloys (Edition P 1)
- PREN 6019-1990 Aerospace Series Test Methods for Metallic Materials Recommended Practice for R-Curve and Kco Determination (Issue P 1)
- PREN 2002-21-2000 Aerospace Series Metallic Materials Test Methods Part 21: Radiographic Testing of Castings (Edition P 2)
- PREN 2003-15-1995 Aerospace Series Test Methods for Metallic Materials Ultrasonic Testing Part 15 : Reference Blocks (Edition P1)
Professional Standard - Machinery, Metal flow line detection method
- JB/T 10765-2007 Non-destructive testing-Magnetic flux leakage testing of atmospheric pressure metal storage tanks
- JB/T 10765-2023 Non-destructive testing—Magnetic flux leakage testing of atmospheric pressure metal storage tanks
- JB/T 10764-2007 Non-destructive testing-Acoustic emission testing and evaluation of atmospheric pressure metal storage tanks
- JB/T 11606-2013 Non-destructive testing instruments.Metal magnetic memory instrument verification
- JB/T 10231.25-2006 Tool inspection methods Part 25: Metal cutting band saw blades
Group Standards of the People's Republic of China, Metal flow line detection method
- T/MMAC 006-2022 Detection method of tailings filling in metal mines
- T/CSTM 00665-2023 Non-destructive testing—Electromagnetic method to test gaps between two metal pieces
- T/ATNT 1-2023 Method for testing the performance of couplant for ultrasonic testing of metal materials
- T/CCAS 019-2021 Determination of heavy metals in cement and clinker-ICP-OES method
- T/GAMA 18-2021 Laser Ultrasonic Method for Online Inspection of Metal Additively Manufactured Components
- T/GAMA 21-2021 Water immersion ultrasonic method for off-line inspection of additively manufactured metal components
- T/CGMA 041010-2020 Safety evaluation and detection method of heavy metal indicators for drinking water valves
- T/YNBX 081-2023 Rapid determination of heavy metals in soil from agricultural production areas by x-ray fluorescence spectrometry
- T/ZJBX 03-2019 On-site hardness testing of metal materials D-type portable leeb hardness testing method
- T/DZJN 168-2023 Calculation and detection method of recovery rate of valuable metals in waste power batteries
- T/GAMA 23-2022 Additive manufacturing Online defect detection of metal components Thermal excitation temperature response method.
- T/NAHIEM 28-2020 Test Method for Removal of Zearalenone by Nonmetallic Mineral Materials
- T/JMZJXH 015-2023 Detection method for heavy metals and specific substance content in biodegradable tapes
IN-BIS, Metal flow line detection method
CZ-CSN, Metal flow line detection method
- CSN 01 5057 ZZ1-2000
- CSN 20 0300 Cast.2-1983 Metalworklng Machines. The measurlng of geometriqal accuracy of Machine tools. Methods of checklng accurgcy. General requirements
- CSN 70 0511-1976 Glass. Testing methods. Determination of the mean linear therroal coefficients of glass, glassceramics and cermets.
Indonesia Standards, Metal flow line detection method
Shaanxi Provincial Standard of the People's Republic of China, Metal flow line detection method
RO-ASRO, Metal flow line detection method
- STAS 6679/13-1985 Metal-cutting machine-tools HECKING METHODS OF SQUARE- ESS OF THE PATHES OF TWO OVABLE PARTS
- STAS 9684-1982 CORROSION OF METALS Methods for testing and measuring resistance to corrosion
- STAS 6606/1-1986 RADIOLOGICAL FLAW DETECTION Radiographic examination of metallic materials. Genera] technical requirements
- STAS 6679/20-1986 Metal cutting machine-tools CHECKING METHODS FOR DEVIATION FROM INTERSECTION OF AXES
- STAS 6679/6-1985 Metal cutting machine-tools CHECKING METHOD OF PARAL- LELISM OF THE TRAJECTORIES OF TWO WORKING BODIES
- STAS 6679/14-1985 Metal cutt ing machinc-tools METHODS OF TESTING THE QUARENNESS OF AN AXIS TO HE FRONT SURFACE
- STAS 6679/7-1985 Metal cutting machine-tools PARALIELISM OF THE AXIS TO A PLANE CHEKING UP METHODS
- STAS 6679/5-1985 Metal cutting mncline-tools METHODE DE simuiLtanEous CHE-CKING STHHIGHTNESS AND PAHALLELISM OF THE MOY1NG BODY DIREC.TION OF MOVEMENT TO A l'l.ANIi OH AN AXIS
- STAS 9181-1989 METAL BOX-PALLETS Rules for quality control, inspection methods, delivery, storage and transport
- STAS 6679/4-1985 Metal cutting maehinc-tools METHODE CHECKING PABAL- LELISM OF THE MOVING BODY BIRECTION TO A PLANE OR AN AXIS
Guizhou Provincial Standard of the People's Republic of China, Metal flow line detection method
- DB52/T 1695-2022 Technical requirements and detection methods of heavy metal water quality automatic online monitoring system (ICP-MS method)
American Society for Testing and Materials (ASTM), Metal flow line detection method
- ASTM E1030-05(2011) Standard Test Method for Radiographic Examination of Metallic Castings
- ASTM E1030-00 Standard Test Method for Radiographic Examination of Metallic Castings
- ASTM E1030-05 Standard Test Method for Radiographic Examination of Metallic Castings
- ASTM B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
- ASTM B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
- ASTM B212-09 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- ASTM F629-02(2007)e1 Standard Practice for Radiography of Cast Metallic Surgical Implants
- ASTM B890-07(2012) Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
- ASTM B213-20 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM B213-17 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM B890-07 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
- ASTM C1785-16a Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
- ASTM E747-97 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology
- ASTM B964-09 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
- ASTM C1517-16 Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy
- ASTM E1085-95(2004) Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
- ASTM E1085-95(2000) Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
- ASTM E1085-95(2004)e1 Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
- ASTM B964-23 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
- ASTM C1517-02 Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy
- ASTM C1517-09 Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy
- ASTM B964-16 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
- ASTM B362-91(1997)e1 Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
- ASTM B362-91(2020) Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
- ASTM E1447-22 Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry
- ASTM F1261M-96 Standard Test Method for Determining the Average Electrical Width of a Straight, Thin-Film Metal Line [Metric]
- ASTM F1261M-96(2003) Standard Test Method for Determining the Average Electrical Width of a Straight, Thin-Film Metal Line [Metric]
- ASTM D7511-12(2017)e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM D7511-09e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM D7511-09 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM B890-20 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
- ASTM C1785-17 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
- ASTM C1785-16 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
- ASTM B890-02 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
- ASTM B890-98 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
- ASTM B855-17 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
- ASTM C1785-15 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
- ASTM B389-81(1998) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
- ASTM B389-81(2020) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
- ASTM B212-21 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- ASTM B212-17 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- ASTM F390-11 Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
- ASTM B855-06 Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel
- ASTM D6906-03 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence
- ASTM D6906-03(2010)e1 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence
- ASTM D6906-11 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence
- ASTM B855-11 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
- ASTM B855-94(1999)e1 Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel
- ASTM E1068-85(1996)e1 Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid
- ASTM B417-11 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
- ASTM B855-22 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
- ASTM B417-13 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
- ASTM G74-13(2021) Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
- ASTM A754/A754M-11 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
- ASTM B487-20 Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
- ASTM D6376-09 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy
- ASTM D6376-10(2017)e1 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy
- ASTM D6502-99(2003) Standard Test Method for On-Line Measurement of Low Level Particulate and Dissolved Metals in Water by X-Ray Fluorescence (XRF)
- ASTM D6502-99 Standard Test Method for On-Line Measurement of Low Level Particulate and Dissolved Metals in Water by X-Ray Fluorescence (XRF)
- ASTM B417-22 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
- ASTM B417-18 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
- ASTM A923-22 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
- ASTM A923-23 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
- ASTM D763-01 Standard Specification for Raw and Burnt Umber Pigments
- ASTM D763-81(1995) Standard Specification for Raw and Burnt Umber Pigments
- ASTM D7639-10 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
- ASTM D7639-22 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
- ASTM A754/A754M-11(2016) Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
- ASTM F616M-96 Standard Test Method for Measuring MOSFET Drain Leakage Current (Metric)
- ASTM F616M-96(2003) Standard Test Method for Measuring MOSFET Drain Leakage Current (Metric)
- ASTM D6906-11a Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
- ASTM D6906-12 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
- ASTM D6906-12a Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
- ASTM D6906-12a(2016) Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
- ASTM D6906-12a(2021) Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
- ASTM A754/A754M-21 Standard Test Method for Coating Weight [Mass] of Metallic Coatings on Steel by X-Ray Fluorescence
- ASTM A754/A754M-96(2004) Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
- ASTM A754/A754M-06 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
- ASTM A754/A754M-96(2000) Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
- ASTM E399-12 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
- ASTM E399-12e1 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials
- ASTM A754/A754M-18 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
- ASTM D7639-10(2014) Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
- ASTM D7639-10(2018) Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
- ASTM B761-17(2021) Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
- ASTM A923-98 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
- ASTM A923-01e1 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
- ASTM A923-03 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
- ASTM D3658-01(2016) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
- ASTM E1915-07 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
- ASTM D6376-10 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy
- ASTM B487-85(1997) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
- ASTM D3658-90(1995) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
- ASTM D3658-01(2008) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
- ASTM A883/A883M-01 Standard Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials (Withdrawn 2006)
- ASTM D6376-05 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy
- ASTM D6376-06 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy
- ASTM D6376-99 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy
- ASTM B244-09(2021) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM B244-09 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM B244-09(2014) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM D7511-09e2 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM D7511-12 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM B761-06(2011) Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
- ASTM B761-17 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
- ASTM D3658-01 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
RU-GOST R, Metal flow line detection method
- GOST 27333-1987 Nondestructive testing. Measurement of electrical conductivity of nonferrous metals by eddy current method
- GOST 8.398-1980 State system for ensuring the uniformity of measurements. Hardness testing machines for metals and alloys. Methods and means of verification
- GOST 8.044-1980 State system for ensuring the uniformity of measurements. Diamond indentors of the hardness testing machines for metal and alloys. Verification methods and means
- GOST R 54420-2011 Ophthalmic optics. Metal and combination spectacle frames. Method for the simulation of wear and detection of nickel release
Professional Standard - Non-ferrous Metal, Metal flow line detection method
- YS/T 478-2005 The method for electrical conductivity measurement of copper and copper alloys by use of eddy current
- YS/T 372.2-2006 Methods for elementary analysis of precious alloy. Determination of platinum content. Electricity titration using potassium permanganate
- YS/T 372.2-1994 Methods for elementary analysis of precious alloy. Determination of platinum content. Electricity titration using potassium permanganate
ATIS - Alliance for Telecommunications Industry Solutions, Metal flow line detection method
- T1.TR.43-1995 Algorithms for Load Coil Detection on Metallic Pairs Assigned to Digital Subscriber Lines
British Standards Institution (BSI), Metal flow line detection method
- BS 7731:1994 Method for radiographic examination of cast metallic surgical implants
- BS EN 60811-606:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Methods for determining the density
- BS EN 2002-16:2019 Aerospace series. Metallic materials. Test methods - Non-destructive testing. Penetrant testing
- BS EN ISO 4490:2014 Metallic powders. Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- BS EN ISO 4490:2008 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
- BS ISO 21608:2012 Corrosion of metals and alloys. Test method for isothermalexposure oxidation testing under high-temperature corrosion conditions for metallic materials
- BS EN 60811-100:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General
- BS EN 60811-202:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General tests. Measurement of thickness of non-metallic sheath
- BS EN 24883:1993 Specification for hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Solution method
- BS EN 60811-502:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Shrinkage test for insulations
- BS EN 60811-302:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Electrical tests. Measurement of the d.c. resistivity at 23 $0dC and 100 °C of filling compounds
- BS PD ISO/TS 17951-1:2016 Water quality. Determination of fluoride using flow analysis (FIA and CFA). Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation
- BS EN 2002-21:2019 Aerospace series. Metallic materials. Test methods - Radiographic testing of castings
- PD ISO/TR 10771-2:2008 Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Rating method
- BS ISO 10771-1:2015 Tracked Changes. Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Test method
- DD ENV 14027-2001 Method for the simulation of wear before the detection of nickel release from coated metal and combination spectacle frames
- BS EN 60811-507:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Hot set test for cross-linked materials
- BS EN 13523-10:2017 Tracked Changes. Coil coated metals. Test methods. Resistance to fluorescent UV radiation and water condensation
- BS ISO 22066:2020 Water quality. Determination of total cyanide. Method using segmented flow injection, in-line ultraviolet digestion analysis by gas diffusion and amperometric detection
- PD ISO/TS 17951-1:2016 Water quality. Determination of fluoride using flow analysis (FIA and CFA). Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation
- BS DD ENV 14027:2001 Method for the simulation of wear before the detection of nickel release from coated metal and combination spectacle frames
- 19/30355969 DC BS ISO 22066. Water quality. Determination of available total cyanide. Method using segmented flow injection, in-line ultraviolet digestion analysis by gas diffusion and amperometric detection
- BS EN 60811-510:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air
- BS EN 60811-511:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Measurement of the melt flow index of polyethylene compounds
- PD IEC TS 62607-8-1:2020 Nanomanufacturing. Key control characteristics. Nano-enabled metal-oxide interfacial devices. Test method for defect states by thermally stimulated current
- BS EN 60811-501:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Tests for determining the mechanical properties of insulating and sheathing compounds
Standard Association of Australia （SAA）, Metal flow line detection method
- AS 2177.1:1994 Non-destructive testing - radiography of welded butt joints in metal Part 1: Methods of test
Association Francaise de Normalisation, Metal flow line detection method
- NF EN ISO 3543:2001 Revêtements métalliques et non métalliques - Mesurage de l'épaisseur - Méthode par rétrodiffusion des rayons bêta
- FD ISO/TR 17276:2014 Cosmétiques - Approche analytique des méthodes de détection et de quantification des métaux lourds dans les cosmétiques
- NF EN ISO 3497:2001 Revêtements métalliques - Mesurage de l'épaisseur du revêtement - Méthodes par spectrométrie de rayons X
- NF L10-023*NF EN 2002-16:2019 Aerospace series - Metallic materials - Test methods - Part 16 : non-destructive testing - Penetrant testing
- NF EN 2002-16:2019 Série aérospatiale - Matériaux métalliques - Méthodes d'essais - Partie 16 : essais non destructifs - Examen par ressuage
- NF EN 2002-21:2019 Série aérospatiale - Matériaux métalliques - Méthodes d'essai - Partie 21 : examen radiographique des pièces moulées
- NF A04-107:1980 Iron and steel. Micrographic method of determination of the non metallic inclusion content of unalloyed wire rod.
- NF P41-501:1973
- NF A89-575:2003 Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement.
- NF M81-674:1986 Coal mine equipment. Flame retardation conveyor belts with steel cord for underground and for above ground. Test methods and measurements.
- NF C26-212:1989 Methods of test for the determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources.
- NF C32-011-502*NF EN 60811-502:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: mechanical tests - Shrinkage test for insulations
IT-UNI, Metal flow line detection method
Professional Standard-Ships, Metal flow line detection method
Professional Standard - Geology, Metal flow line detection method
- DZ/T 0064.78-1993 Determination of Deuterium by Metal Zinc Reduction Method for Groundwater Quality
Korean Agency for Technology and Standards (KATS), Metal flow line detection method
- KS M 6584-2008 Standard test method for rubber－Determination of metal content by Flame Atomic Absorption(AAS) analysis
- KS D ISO 3497-2002(2017) Metallic coatings－Measurement of coating thickness－X-ray spectrometric methods
- KS D ISO 10070:2004 Metallic powders－Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
- KS G ISO 24348-2011(2016) Ophthalmic optics－Spectacle frames－Method for the simulation of wear and detection of mickel release from metal and combination spectacle frames
- KS G ISO 24348-2011(2021) Ophthalmic optics－Spectacle frames－Method for the simulation of wear and detection of mickel release from metal and combination spectacle frames
- KS C IEC 60811-511:2018 Electric and optical fibre cables — Test methods for non-metallic materials — Part 511: Mechanical tests — Measurement of the melt flow index of polyethylene compounds
Liaoning Provincial Standard of the People's Republic of China, Metal flow line detection method
- DB21/T 2466-2015 Avian influenza virus immunochromatography (colloidal gold) detection method
- DB21/T 2077-2013 General test methods for wires and cables - Measurement of coverage of metal braids and wrappings
ES-UNE, Metal flow line detection method
- UNE-EN 24883:1993 HARDMETALS. DETERMINATION OF CONTENTS OF METALLIC ELEMENTS BY X-RAY FLUORESCENCE. SOLUTION METHOD. (Endorsed by AENOR in May of 1993.)
- UNE-EN 2002-21:2019 Aerospace series - Metallic materials - Test methods - Part 21: Radiographic testing of castings (Endorsed by Asociación Española de Normalización in January of 2020.)
- UNE-EN 2002-16:2019 Aerospace series - Metallic materials - Test methods - Part 16: Non-destructive testing - Penetrant testing (Endorsed by Asociación Española de Normalización in January of 2020.)
- UNE-EN ISO 19879:2022 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
- UNE-EN 13523-10:2017 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
European Committee for Standardization (CEN), Metal flow line detection method
- EN 13523-2:2014 Coil coated metals - Test methods - Part 2: Gloss
- EN 13523-2:2021 Coil coated metals - Test methods - Part 2: Gloss
- EN 13523-4:2014 Coil coated metals - Test methods - Part 4: Pencil hardness
- EN 13523-9:2014 Coil coated metals - Test methods - Part 9: Resistance to water immersion
- prEN 2002-4-1978 Test methods for metallic materials; part 4: calibration of dynamometric calibration devices; aerospace series
- EN 13523-26:2014 Coil coated metals - Test methods - Part 26: Resistance to condensation of water
- EN 13523-3:2014 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
- CEN EN 13523-10-2001 Coil Coated Metals - Test Methods - Part 10: Resistance to Fluorescent UV Light and Water Condensation
- EN 13523-13:2014 Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat
- EN ISO 16808:2022 Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems (ISO 16808:2022)
- EN 4050-2:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 2: Performance of test
Professional Standard - Light Industry, Metal flow line detection method
- QB/T 3815-1999 Thickness testing method of the metal deposits for the light industrial products.Timekeeping of liquid flow method
- QB/T 3819-1999 Thickness testing method of the metal deposits and conversion coatings for the light indus trial products.β Ray backscattering
BE-NBN, Metal flow line detection method
- NBN EN ISO 4524-6:1995 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 6: Determination of the presence of residual salts (ISO 4524-6:1988)
- NBN I 07-007-1986
German Institute for Standardization, Metal flow line detection method
- DIN EN 2002-21:2020-09 Aerospace series - Metallic materials - Test methods - Part 21: Radiographic testing of castings; German and English version EN 2002-21:2019
- DIN EN 2002-16:2020-02 Aerospace series - Metallic materials - Test methods - Part 16: Non-destructive testing - Penetrant testing; German and English version EN 2002-16:2019
- DIN EN ISO 19879:2021-06 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021); German version EN ISO 19879:2021
- DIN EN ISO 3497:2001-12 Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000); German version EN ISO 3497:2000
- DIN ISO 4883:1991-06 Hardmetals; determination of contents of metallic elements by X-ray fluorescence; solution method; identical with ISO 4883:1978
- DIN 54141-2:1982 Non-destructive testing; Eddy current testing of pipes and tubes; Reference method for the determination and calibration of the properties of an eddy current testing system using concentric test coils
- DIN EN ISO 19879:2019 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO/DIS 19879:2019); German and English version prEN ISO 19879:2019
- DIN EN 13523-10:2017-05 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German version EN 13523-10:2017
- DIN EN 13523-10:2023-08 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German and English version prEN 13523-10:2023 / Note: Date of issue 2023-07-14*Intended as replacement for DIN EN 13523-10 (2017-05).
- DIN EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid; German version EN 15856:2010
European Association of Aerospace Industries, Metal flow line detection method
- AECMA PREN 2002-16-1989 Aerospace Series Test Methods for Metallic Materials Part 16: Method for Penetrant Flow Detection
- AECMA PREN 3238-2009 Aerospace series Metallic materials Test method Shear test for wires and rivets Edition P 1
- AECMA PREN 3238-1993 Aerospace Series Test Methods for Metallic Materials Except Aluminium and Aluminium Alloys Shear Test for Wires and Rivets
- AECMA PREN 2002-20-1996 Aerospace Series Test Methods for Metallic Materials Part 20 : Eddy Current Testing of Circular Cross-Section Tubes Edition P 1
- AECMA PREN 3877-1997 Aerospace Series Metallic Materials Test Method Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis of Braze Alloys Edition P 1
- AECMA PREN 3877-1993 Aerospace Series Test Method for Braze Alloys Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis
VE-FONDONORMA, Metal flow line detection method
International Organization for Standardization (ISO), Metal flow line detection method
- ISO 21608:2012 Corrosion of metals and alloys - Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials
- ISO 11873:2005/cor 1:2008 Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method; Technical Corrigendum 1
- ISO 753-10:1981 Acetic acid for industrial use; Methods of test; Part 10 : Visual limit test for heavy metals (including iron)
- ISO/DIS 6893:2023 Jewellery and precious metals — Inspection of batches of small diamonds — Terminology, classification and test methods
- ISO 22066:2020 Water quality — Determination of total cyanide — Method using segmented flow injection, in-line ultraviolet digestion analysis by gas diffusion and amperometric detection
- ISO/TR 10771-2:2008 Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 2: Rating methods
- ISO/DIS 22863-13:2023 Fireworks — Test methods for determination of specific chemical substances — Part 13: Qualitative detection of metal element in firework compositions
NZ-SNZ, Metal flow line detection method
- AS/NZS 1660.1:1998 Test Methods for Electric Cables, Cords and Conductors Method 1: Conductors and Metallic Components
PT-IPQ, Metal flow line detection method
- NP EN 13523-0-2002 Coil coated metals Test methods Part 0:General introduction and list of test methods
- NP EN 13523-1-2002 Coil coated metals Test methods Part 1:Coating thickness
- NP EN 13523-2-2002 Coil coated metals Test methods Part 2:Specular gloss
- NP EN 13523-3-2002 Coil coated metals Test methods Part 3:Colour difference-Instrumental comparison
- NP EN 13523-5-2002 Coil coated metals Test methods Part 5:Resistance to rapid deformation(impact test)
水利部, Metal flow line detection method
- SL 547-2011 Test method for residual stress of hydraulic metal structures X-ray diffraction method
Guangdong Provincial Standard of the People's Republic of China, Metal flow line detection method
- DB44/T 1376-2014 Method for simulation of wear of metallic and hybrid spectacle frames and detection of nickel release
PL-PKN, Metal flow line detection method
- PN E04160 ArkusZ11-1973 Electric cables Methods of testing Test of the mechanical characteristics of vires
- PN M55551-15-1987 Metal cutting machin? tools ethods of measurement the arallelism of an ax*s to a piane
- PN M55551-22-1987 Metal cutting machin? tools Methods of measurement of straightness and parallelism of a motion to the reference surface
- PN M55551-23-1986 Metal cutting machin? tools Methods of measurement of parallelism of a trajectory to a plan or to an axis
- PN M55551-24-1986 Metal cutting machin? tools Methods of measurement of squareness of a motion to a plan or to an axis
- PN M55551-06-1986 Metal cutting machin? tools ethods of measurement l" straightness and s?uareness l" a motion to a piane or to an axis
Hubei Provincial Standard of the People's Republic of China, Metal flow line detection method
- DB42/T 1590-2020 H7 subtype avian influenza virus colloidal gold test strip antigen detection method
Professional Standard - Aerospace, Metal flow line detection method
- QJ 1072-1986 Eddy current method for measuring the thickness of nonconductive coatings on nonmagnetic base metals
ZA-SANS, Metal flow line detection method
- SANS 6282-2:2007 Test methods for bare conductors and conductors of insulated electric cables Part 2: Quality of metallic coatings
SE-SIS, Metal flow line detection method
- SIS SS 18 41 60-1992 Paints and varnishes — Determination of thickness of a dry film on a metal substrate — Magnetic flux and eddy current methods
Professional Standard - Building Materials, Metal flow line detection method
- JC/T 2147-2012 Determination of trace metal elements in high purity alumina by inductively coupled plasma atomic emission spectrometry
Lithuanian Standards Office , Metal flow line detection method
- LST EN ISO 19879:2011 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
- LST EN ISO 19879:2021 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
AT-ON, Metal flow line detection method
- OENORM EN ISO 19879:2021 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
AENOR, Metal flow line detection method
- UNE-EN ISO 19879:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
Aerospace, Security and Defence Industries Association of Europe (ASD), Metal flow line detection method
- ASD-STAN PREN 2002-20-1996 Aerospace Series Test Methods for Metallic Materials Part 20 : Eddy Current Testing of Circular Cross-Section Tubes (Edition P 1)
- ASD-STAN PREN 3877-1997 Aerospace Series Metallic Materials Test Method Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis of Braze Alloys (Edition P 1)
- ASD-STAN PREN 4050-2-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Bars, Plates, Forging Stock and Forgings Part 2: Performance of Test (Edition P 1)
- ASD-STAN PREN 2003-8-1995 Aerospace Series Test Methods for Metallic Materials Ultrasonic Inspection of Billets, Bars, Plates and Forgings Part 8 : Acceptance Criteria (Edition P1)
- ASD-STAN PREN 4050-1-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Bars, Plates, Forging Stock and Forgings Part 1: General Requirements (Edition P 1)
- ASD-STAN PREN 4050-3-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Bars, Plates, Forging Stock and Forgings Part 3: Reference Blocks (Edition P 1)
- ASD-STAN PREN 4050-4-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Bars, Plates, Forging Stock and Forgings Part 4: Acceptance Criteria (Edition P 1)
未注明发布机构, Metal flow line detection method
- BS 7268:1990(1999) Method for Determination of fatigue pressure rating of metal pressure containing envelopes in hydraulic fluid power systems
- DIN EN ISO 21392:2022 Cosmetic products – examination methods – measurement of traces of heavy metals in cosmetic end products using ICP-MS
- BS 7922:2004(2009) Electric cables — Fluid - filled, paper - and PPL - insulated, metal - sheathed cables and accessories for alternating voltages up to and including 400 kV (Um = 420 kV) — Requirements and test methods
Danish Standards Foundation, Metal flow line detection method
- DS/EN ISO 19879:2021 Metallic tube connections for fluid power and general use – Test methods for hydraulic fluid power connections (ISO 19879:2021)
- DS/IEC/TS 60695-5-3:2004 Fire hazard testing - Part 5-3: Corrosion damage effects of fire effluent - Leakage-current and metal-loss test method
The American Road & Transportation Builders Association, Metal flow line detection method
- AASHTO TP 106-2013 Standard Method of Test for Determination of Heavy Metal Content of Glass Beads Using X-Ray Fluorescence (XRF)
- AASHTO T 392-2021 Standard Method of Test for Determination of Heavy Metal Content of Glass Beads Using X-Ray Fluorescence (XRF)
AASHTO - American Association of State Highway and Transportation Officials, Metal flow line detection method
- TP 106-2013 Standard Method of Test for Determination of Heavy Metal Content of Glass Beads Using X-Ray Fluorescence (XRF)
BR-ABNT, Metal flow line detection method
- ABNT ISO/TS 24348:2020 Ophthalmic optics - Spectacle frames - Method for the simulation of wear and detection of nickel release from metal and combination spectacle frames
海关总署, Metal flow line detection method
- SN/T 5104-2019 Anodic stripping voltammetry detection method for heavy metals (zinc, cadmium, lead, copper, mercury, arsenic) in drinking water at border ports
IEC - International Electrotechnical Commission, Metal flow line detection method
- PAS 62204-2000 Standard Method for Measuring and Using the Temperature Coefficient of Resistance to Determine the Temperature of a Metallization Line (Edition 1.0)
European Committee for Electrotechnical Standardization（CENELEC）, Metal flow line detection method
- HD 541 S1-1991 Methods of Test for the Determination of the Ignitability of Solid Electrical Insulating Materials When Exposed to Electrically Heated Wire Sources
YU-JUS, Metal flow line detection method
- JUS B.C1.017-2001 Slag - constituent for cement production Classification, technical conditions and test methods
Professional Standard - Water Conservancy, Metal flow line detection method
- SL 581-2012 Ultrasonic testing method and quality classification for T-joint fillet welds and combination of butter weld and fillet weld of hydro steel structures
(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Metal flow line detection method
- JEDEC JESD33B-2004 Standard Method for Measuring and Using the Temperature Coefficient of Resistance to Determine the Temperature of a Metallization Line
Professional Standard - Medicine, Metal flow line detection method
- YY/T 1807-2022 Rapid non-destructive testing of main components in metal materials for dental restorations Hand-held X-ray fluorescence spectrometer method (semi-quantitative method)
GOSTR, Metal flow line detection method
- GOST R 58600-2019 Additive technologies. Non-destructive testing of metal products manufactured by using additive technology methods. Main provisions
KR-KS, Metal flow line detection method
- KS C IEC 60811-511-2018 Electric and optical fibre cables — Test methods for non-metallic materials — Part 511: Mechanical tests — Measurement of the melt flow index of polyethylene compounds
Shanghai Provincial Standard of the People's Republic of China, Metal flow line detection method
- DB31/T 707-2013 Test method of heavy metals and brominated flame retardants in wastewater from recycling, recovery and treatment industry of waste electrical and electronic equipment