ZH

RU

ES

near the site

near the site, Total:59 items.

In the international standard classification, near the site involves: Radiation measurements, Accident and disaster control, Vocabularies, Products of the textile industry, Mobile services, Electricity. Magnetism. Electrical and magnetic measurements, Agricultural machines, implements and equipment, Protection against electric shock, Radiation protection, Electrical accessories, Applications of information technology.


Danish Standards Foundation, near the site

  • DS/EN 50554:2021 Basic standard for the in-situ assessment of exposure to radio frequency electromagnetic fields in the vicinity of a broadcast site
  • DS/EN 50492:2009 Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations

Lithuanian Standards Office , near the site

  • LST EN 50554-2021 Basic standard for the in-situ assessment of exposure to radio frequency electromagnetic fields in the vicinity of a broadcast site
  • LST EN 50492-2009 Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations

Association Francaise de Normalisation, near the site

  • NF C91-131*NF EN 50554:2021 Basic standard for the in-situ assessment of exposure to radio frequency electromagnetic fields in the vicinity of a broadcast site
  • NF ISO 13216-1:2000 Véhicules routiers - Ancrages dans les véhicules et attaches aux ancrages pour systèmes de retenue pour enfants - Partie 1 : ancrages près de la jonction dossier-coussin d'assise et attaches
  • NF EN 50554:2021 Norme de base pour l'évaluation in-situ de l'exposition du public aux champs électromagnétiques de radiofréquence aux environs d'un site de radiodiffusion
  • NF C99-124:2009 Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations.

American National Standards Institute (ANSI), near the site

  • ANSI A10.34-2001 Protection of the Public on and Adjacent to Construction Sites
  • ANSI/IEEE 1542:2007 Guide for Installation, Maintenance, and Operation of Irrigation Equipment Located Near or Under Power Lines

International Telecommunication Union (ITU), near the site

Professional Standard - Environmental Protection, near the site

  • HJ 730-2014 Specifications on spot location of monitoring sites related to coastal area environment

AENOR, near the site

  • UNE 40052:1980 TEXTILES. WOVEN FABRICS. DETERMINATION OF DIMENSIONAL CHANGE ON COMMERCIAL LAUNDERING NEAR THE BOILING POINT

Korean Agency for Technology and Standards (KATS), near the site

  • KS K ISO 675:2019 Textiles — Woven fabrics — Determination of dimensional change on commercial laundering near the boiling point
  • KS K ISO 675:2014 Textiles — Woven fabrics — Determination of dimensional change on commercial laundering near the boiling point

KR-KS, near the site

  • KS K ISO 675-2019 Textiles — Woven fabrics — Determination of dimensional change on commercial laundering near the boiling point

ES-UNE, near the site

  • UNE-EN 50554:2021 Basic standard for the in-situ assessment of exposure to radio frequency electromagnetic fields in the vicinity of a broadcast site (Endorsed by Asociación Española de Normalización in July of 2021.)

JP-JARI, near the site

  • JRIS E 4117-2-2005 Rolling stock-levelling valves Part2: with throttled air flow around neutral position

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., near the site

  • IEEE 1542-2007 Guide for Installation@ Maintenance@ and Operation of Irrigation Equipment Located Near or Under Power Lines

Institute of Electrical and Electronics Engineers (IEEE), near the site

  • IEEE Unapproved Draft Std P1542/D8, Aug 2007 Guide for Installation, Maintenance and Operation of Irrigation Equipment Located Near Or Under Power Lines
  • IEEE 1542-2018 IEEE Guide for Installation, Maintenance, and Operation of Irrigation Equipment Located Near or Under Power Lines
  • IEEE Std 1542-2007 IEEE Guide for Installation, Maintenance, and Operation of Irrigation Equipment Located Near or Under Power Lines
  • IEEE Std 1542-2018 IEEE Guide for Installation, Maintenance, and Operation of Irrigation Equipment Located Near or Under Power Lines
  • IEEE P1542/D8, February 2018 IEEE Draft Guide for Installation, Maintenance, and Operation of Irrigation Equipment Located Near or Under Power Lines
  • IEEE Unapproved Draft Std P1542/D7, Apr 2007 Unapproved Guide for Installation, Maintenance, and Operation of Irrigation Equipment Located Near Or Under Power Lines
  • IEEE P1542/D9, August 2018 IEEE Approved Draft Guide for Installation, Maintenance, and Operation of Irrigation Equipment Located Near or Under Power Lines
  • IEEE Approved Draft Std P1542/D8, Aug 07 Approved IEEE Draft Guide for Installation, Maintenance, and Operation of Irrigation Equipment Located Near Or Under Power Lines
  • IEEE Std P1542_D6 Unapproved IEEE Draft Guide for Installation, Maintenance and Operation of Irrigation Equipment Located Near or Under Power Lines

British Standards Institution (BSI), near the site

  • BS EN 50554:2021 Tracked Changes. Basic standard for the in-situ assessment of exposure to radio frequency electromagnetic fields in the vicinity of a broadcast site
  • BS EN 50492:2008 Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations

European Committee for Electrotechnical Standardization(CENELEC), near the site

  • EN 50492:2008 Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations (Incorporates Amendment A1: 2014)

Natural Gas Processor's Association (NGPA), near the site

  • GPA RR-96-1986 Vapor Liquid Equilibrium and Condensing Curves in the Vicinity of the Critical Point for a Typical Gas Condensate (Mass Spec Analysis)

ESDU - Engineering Sciences Data Unit, near the site

  • ESDU 85020 G-2001 Characteristics of atmospheric turbulence near the ground. Part II: single point data for strong winds (neutral atmosphere).

German Institute for Standardization, near the site

  • DIN EN 50492:2014 Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations; German version EN 50492:2008 + A1:2014
  • DIN VDE 0660-209:1988 Switchgear and controlgear; low voltage switchgear and controlgear; additional requirements for proximity position switches for safety functions

Defense Logistics Agency, near the site

  • DLA MIL-DTL-55302/122 B VALID NOTICE 1-2013 Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, 184 Contact Positions, for Printed Wiring Boards (.050 Inch Spacing)
  • DLA MIL-DTL-55302/122 B (2)-2013 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 184 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.050 INCH SPACING)
  • DLA MIL-DTL-55302/193 A-2006 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 122 AND 152 POSITION, PRINTED WIRING BOARD (.075 SPACING)
  • DLA MIL-DTL-55302/82 C (1)-2011 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, 41, 66, 114 CONTACT POSITIONS: FOR PRINTED WIRING BOARDS (.100 X .050 OFFSET GRID)
  • DLA MIL-DTL-55302/58 J (1)-2011 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
  • DLA MIL-DTL-55302/62 H (1)-2011 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
  • DLA MIL-DTL-55302/64 H (1)-2011 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
  • DLA MIL-DTL-55302/66 G (1)-2011 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
  • DLA MIL-DTL-55302/193 B VALID NOTICE 1-2013 Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, 122 and 152 Position, Printed Wiring Board (.075 Spacing)
  • DLA MIL-DTL-55302/191 B-2009 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 100 POSITIONS, PRINTED WIRING BOARD (.075 SPACING)
  • DLA MIL-DTL-55302/131 D VALID NOTICE 1-2012 Connectors, Plug, Electrical, Printed Circuit Subassembly and Accessories: Right Angle, Pin Contacts, 64 or 96 Contact Position for Printed Wiring Boards (.100 Spacing)
  • DLA MIL-DTL-55302/59 H (1)-2011 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 90, 100 AND 120 CONTACT POSITIONS FOR PRINTED WIRING BOARDS (.100 SPACING)
  • DLA MIL-DTL-55302/193 B-2009 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 122 AND 152 POSITION, PRINTED WIRING BOARD (.075 SPACING)
  • DLA MIL-DTL-55302/126 D VALID NOTICE 1-2012 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, 80 Contact Positions, for Printed Wiring Boards (.050 Inch Spacing)
  • DLA MIL-DTL-55302/56 H (2)-2013 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
  • DLA MIL-DTL-55302/56 H (1)-2011 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
  • DLA MIL-DTL-55302/57 H (1)-2011 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
  • DLA MIL-DTL-55302/26 G (1)-2010 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, 30 thru 140 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 SQ. GRID)
  • DLA MIL-C-55302/129 D VALID NOTICE 1-2001 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, RIGHT ANGLE, 90 THROUGH 240 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 INCH SPACING)

International Organization for Standardization (ISO), near the site

  • ISO/IEC 14443-2:2001/Amd 1:2005/Cor 1:2007 Identification cards - Contactless integrated circuit(s) cards; Proximity cards - Part 2: Radio frequency power and signal interface; Amendment 1: Bit rates of fc/64, fc/32 and fc/16

American Welding Society (AWS), near the site

  • WRC 046:1959 Observations of Strains Near Reinforced and Non-Reinforced Cone Cylinder Intersections, and Discussion - "Design Formulas for a Thin Cylinder with Cone Shaped Ends"




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved