ZH
RU
ES
Measurement of Microplastics
Measurement of Microplastics, Total:380 items.
In the international standard classification, Measurement of Microplastics involves: Plastics, Environmental protection, Cutting tools, Fuels, Fluid power systems, Rubber and plastics products, Products of the chemical industry, Paint ingredients, Construction materials, Water quality, Air quality, Optics and optical measurements, Cellular materials, Iron and steel products, Conducting materials, Animal feeding stuffs, Paints and varnishes, Linear and angular measurements, Analytical chemistry, Protection against fire, Protection against crime, Reinforced plastics, Milk and milk products, Particle size analysis. Sieving, Powder metallurgy, Testing of metals, Protection of and in buildings, Materials for aerospace construction, Pipeline components and pipelines, Metrology and measurement in general, Fertilizers, Raw materials for rubber and plastics, Coals, Domestic, commercial and industrial heating appliances.
CO-ICONTEC, Measurement of Microplastics
FI-SFS, Measurement of Microplastics
European Committee for Standardization (CEN), Measurement of Microplastics
- EN ISO 1265:1997 Plastics - Polyvinyl Chloride Resins - Determination of Number of Impurities and Foreign Particles ISO 1265: 1979
- EN ISO 1265:2007 Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles (ISO 1265:2007)
- prEN 481-1992 Workplace atmospheres; size fraction definitions for measurement of airbone particles
- EN ISO 5370:2023 Solid biofuels - Determination of fines content in pellets (ISO 5370:2023)
- EN 481:1993 Workplace atmospheres; size fraction definitions for measurement of airborne particles
- EN ISO 15512:2014 Plastics - Determination of water content (ISO 15512:2014)
- EN ISO 15512:2019 Plastics - Determination of water content (ISO 15512:2019)
- EN ISO 15512:2009 Plastics - Determination of water content
- prEN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021)
- PD CEN/TS 17627:2021 Plastics - Recycled plastics - Determination of solid contaminants content
- CEN/TS 17627:2021 Plastics - Recycled plastics - Determination of solid contaminants content
- prEN ISO 4484-2:2021 Textiles and textile products - Microplastics from textile sources - Part 2: Qualitative and quantitative evaluation of microplastics (ISO/DIS 4484-2:2021)
- prEN ISO 4484-2 Textiles and textile products - Microplastics from textile sources - Part 2: Qualitative and quantitative evaluation of microplastics (ISO/DIS 4484-2:2022)
- PD CEN/TS 16137:2011 Plastics - Determination of bio-based carbon content
- EN 12118:1997 Plastics piping systems - Determination of moisture content in thermoplastics by coulometry
- EN ISO 177:2017 Plastics - Determination of migration of plasticizers
- EN ISO 15512:2016 Plastics - Determination of water content
- EN ISO 15512:2003 Plastics - Determination of water content ISO 15512:1999
- EN 15962:2011 Fertilizers - Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients
- FprCEN/TS 17754-2021 Inorganic fertilizers - Determination of specific micronutrients
- CEN/TS 17754:2022 Inorganic fertilizers - Determination of specific micronutrients
- EN ISO 119:1998 Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Phenols - Iodometric Method
International Organization for Standardization (ISO), Measurement of Microplastics
- ISO 1265:2007 Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles
- ISO/TS 19278:2019 Plastics — Instrumented micro-indentation test for hardness measurement
- ISO 6188:1986 Plastics; Poly(alkylene terephthalate) granules; Determination of water content
- ISO 6188:1980 Plastics — Poly(ethylene terephthalate) granules — Determination of water content
- ISO/CD 5667-27.2 Water quality — Sampling — Part 27: Sampling for microplastic particles and fibres in water
- ISO 3915:1981 Plastics; measurement of resistivity of conductive plastics
- ISO 3915:2022 Plastics — Measurement of resistivity of conductive plastics
- ISO/FDIS 4484-2:2023 Textiles and textile products — Microplastics from textile sources — Part 2: Qualitative and quantitative analysis of microplastics
- ISO 4484-2:2023 Textiles and textile products — Microplastics from textile sources — Part 2: Qualitative and quantitative analysis of microplastics
- ISO 4576:1996 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content)
- ISO 22196:2007 Plastics - Measurement of antibacterial activity on plastics surfaces
- ISO 1598:1975 Plastics — Cellulose acetate — Determination of insoluble particles
- ISO/CD TS 23947-2.2 Plastics — Microscale Combustion Calorimetry/Pyrolysis combustion flow calorimetry — Part 2: Fingerprinting of plastics
- ISO 5370:2023 Solid biofuels — Determination of fines content in pellets
- ISO/DIS 4484-2.2 Textiles and textile products — Microplastics from textile sources — Part 2: Qualitative and quantitative analysis of microplastics
- ISO 15512:2008 Plastics - Determination of water content
- ISO 15512:2014 Plastics - Determination of water content
- ISO 15512:2016 Plastics - Determination of water content
- ISO 15512:1999 Plastics - Determination of water content
- ISO 15512:2019 Plastics — Determination of water content
- ISO 4576:1978 Plastics; Aqueous dispersions of homopolymers and copolymers; Determination of gross particle content by sieve analysis
- ISO 5739:1983 Caseins and caseinates; Determination of scorched particles content
- ISO 17710:2023 Plastics — Polyols for use in the production of polyurethanes — Determination of degree of unsaturation by microtitration
- ISO 1183:1987 Plastics; Methods for determining the density and relative density of non-cellular plastics
- ISO/FDIS 17710 Plastics — Polyols for use in the production of polyurethanes — Determination of degree of unsaturation by microtitration
- ISO 1133:1991 Plastics; determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
- ISO 9782:1993 Plastics; reinforced moulding compounds and prepregs; determination of apparent volatile-matter content
- ISO 17710:2002 Plastics - Polyols for use in the production of polyurethane - Determination of degree of unsaturation by microtitration
- ISO 10329:2009 Coal - Determination of plastic properties - Constant-torque Gieseler plastometer method
- ISO 13067:2020 Microbeam analysis — Electron backscatter diffraction — Measurement of average grain size
- ISO 4499-2:2020 Hardmetals — Metallographic determination of microstructure — Part 2: Measurement of WC grain size
- ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
- ISO 10352:2010 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area
- ISO 10352:1997 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area
- ISO 119:1977/Cor 1:1979 Plastics; Phenol-formaldehyde mouldings; Determination of free phenols; Iodometric method
- ISO 119:1977 Plastics; Phenol-formaldehyde mouldings; Determination of free phenols; Iodometric method
PT-IPQ, Measurement of Microplastics
未注明发布机构, Measurement of Microplastics
- DIN EN ISO 846:2019 Plastics – Determination of the effect of microorganisms on plastics
- DIN/TS 10068:2022 Food - Determination of microplastics - Analytical methods; Text in English
- BS EN ISO 14853:2017(2018) Plastics – Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system – Method by measurement of biogas production
中华全国供销合作总社, Measurement of Microplastics
- GH/T 1378-2022 Determination of microplastic residues from farmland mulch films
Korean Agency for Technology and Standards (KATS), Measurement of Microplastics
- KS L 6523-2016(2021) Coated abrasives－Determination of grain size distribution of microgrits P12 to P220
- KS I ISO 4407:2012 Hydraulic fluid power-Fluid contamination-Determination of particulate contamination by the counting method using an optical microscope
- KS M ISO 3915:2002 Plastics-Measurement of resistivity of conductive plastics
- KS M ISO 3915-2002(2022) Plastics－Measurement of resistivity of conductive plastics
- KS M ISO 15167-2003(2018)
- KS D 2716-2008(2018) Measurement of nanoparticle diameter－Transmission electron microscope
- KS L 6529-2003 Test method for bulk density of artificial abrasive microgrits
- KS M ISO 18846:2021 Solid biofuels — Determination of fines content in samples of pellets
- KS D 2716-2008 Measurement of nanoparticle diameter－Transmission electron microscope
- KS M 3049-2011(2013) Testing methods for specific heat capacity of plastics
- KS D ISO 4499-2:2009 Hardmetals－Metallographic determination of microstructure－Part 2：Measurement of WC grain size
- KS F 2371-2007 Testing method for bulk density of granular insulations
- KS F 2371-1982 Testing method for bulk density of granular insulations
- KS M ISO 3126-2016(2021) Plastics piping system－Plastics piping components－Measurement and determination of dimensions
- KS I ISO 28439:2013 Workplace atmospheres ― Characterization of ultrafine aerosols/ nanoaerosols ― Determination of the size distribution and number concentration using differential electrical mobility analysing systems
- KS M ISO 1183:2006 Plastics-Methods for determining the density and relative density of non-cellular plastics
- KS M ISO 9782-2002(2022) Plastics－Reinforced moulding compounds and prepregs－Determination of apparent volatile－matter content
- KS M ISO 9782-2002(2017) Plastics－Reinforced moulding compounds and prepregs－Determination of apparent volatile－matter content
- KS M 3050-1990(2001) TESTING METHODS FOR TRANSITION TEMPERATURES OF PLASTICS
- KS M ISO 3251:2021 Paints, varnishes and plastics —Determination of non-volatile-matter content
- KS M ISO 16968:2021 Solid biofuels — Determination of minor elements
- KS M ISO 10352-2012(2017) Fibre-reinforced plastics－Moulding compounds and prepregs－Determination of mass per unit area
VE-FONDONORMA, Measurement of Microplastics
American Society for Testing and Materials (ASTM), Measurement of Microplastics
- ASTM D1708-06 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
- ASTM D1708-06a Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
- ASTM E1358-97(2006) Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven
- ASTM E1358-97 Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven
- ASTM D7486-08 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM D7486-08(2013)e1 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM D7486-22 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM D7651-10 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
- ASTM D7634-10 Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
- ASTM D6290-18 Standard Test Method for Color Determination of Plastic Pellets
- ASTM D6290-98e1 Standard Test Method for Color Determination of Plastic Pellets
- ASTM D6290-19 Standard Test Method for Color Determination of Plastic Pellets
- ASTM D7486-14 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM E1358-97(2019) Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven
- ASTM D5217-91(2004) Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
- ASTM D6290-05 Standard Test Method for Color Determination of Plastic Pellets
- ASTM D6290-05e1 Standard Test Method for Color Determination of Plastic Pellets
- ASTM D6290-13 Standard Test Method for Color Determination of Plastic Pellets
- ASTM F24-00 Standard Method for Measuring and Counting Particulate Contamination on Surfaces
- ASTM F24-09 Standard Method for Measuring and Counting Particulate Contamination on Surfaces
- ASTM E1358-97(2013) Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven
- ASTM D7309-11 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7634-10(2017) Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
- ASTM E2859-11(2017) Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
- ASTM E285-08(2015) Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
- ASTM D5217-91(1998) Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
- ASTM D5217-91(2009) Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
- ASTM D6226-98e1 Standard Test Method for Open Cell Content of Rigid Cellular Plastics
- ASTM D7309-21a Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-21 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-20 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-19 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-19a Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D5217-17 Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
- ASTM D7651-17 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
- ASTM D5861-07 Standard Guide for Significance of Particle Size Measurements of Coating Powders
- ASTM D5861-95 Standard Guide for Significance of Particle Size Measurements of Coating Powders
- ASTM D5861-07(2017) Standard Guide for Significance of Particle Size Measurements of Coating Powders
- ASTM D955-21 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM E2859-11(2023) Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
- ASTM D7309-07a Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM D7309-07 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ASTM E2779-10 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
British Standards Institution (BSI), Measurement of Microplastics
- PD ISO/TS 19278:2019 Plastics. Instrumented micro-indentation test for hardness measurement
- BS EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics
- BS EN ISO 1598:1991 Plastics. Cellulose acetate. Determination of insoluble particles
- BS EN ISO 1598:2000 Plastics - Cellulose acetate - Determination of insoluble particles
- BS EN ISO 4499-2:2020 Hardmetals. Metallographic determination of microstructure - Measurement of WC grain size
- BS EN ISO 15512:2014 Plastics. Determination of water content
- BS EN ISO 15512:2016 Plastics. Determination of water content
- BS 2782-10 Method 1002:1977 Methods of testing plastics. Glass reinforced plastics. Determination of loss on ignition
- BS EN ISO 3915:2022 Tracked Changes. Plastics. Measurement of resistivity of conductive plastics
- 21/30427395 DC BS EN ISO 3915. Plastics. Measurement of resistivity of conductive plastics
- BS EN ISO 4499-2:2010 Hardmetals. Metallographic determination of microstructure. Measurement of WC grain size
- PD ISO/TS 4807:2022 Reference materials for particle size measurement. Specification of requirements
- 21/30431780 DC BS EN ISO 4484-2. Textiles and textile products. Microplastics from textile sources. Part 2. Qualitative and quantitative evaluation of microplastics
- BS ISO 8486-2:2007 Bonded abrasives - Determination and designation of grain size distribution - Microgrits F230 to F2000
- BS ISO 17710:2023 Plastics. Polyols for use in the production of polyurethanes. Determination of degree of unsaturation by microtitration
- BS ISO 13067:2020 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
- BS EN 15962:2011 Fertilizers. Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients
- BS EN 12118:1998 Plastics piping systems. Determination of moisture content in thermoplastics by coulometry
- BS EN ISO 177:2017 Tracked Changes. Plastics. Determination of migration of plasticizers
- BS EN ISO 15512:2009 Plastics - Determination of water content(ISO
15512:2008)
- BS DD CEN/TS 16137:2011 Plastics. Determination of bio-based carbon content
- BS 2782-4 Method 454G:1996 Methods of testing plastics. Chemical properties. Polymer dispersions. Determination of sieve residue (gross particle and coagulum content)
- BS ISO 16014-3:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method
- DD CEN/TS 15297:2006 Solid Biofuels — Determination of minor elements
- BS EN ISO 16968:2015 Solid biofuels. Determination of minor elements
- BS EN ISO 119:1978 Plastics. Phenol-formaldehyde mouldings. Determination of free phenols. Iodometric method
- BS EN ISO 119:1998 Plastics - Phenol-formaldehyde mouldings - Determination of free phenols - Iodometric method
- PD CEN/TS 17786-2:2022 Inorganic micronutrient fertilizers. Determination of the chelated micronutrient content and the chelated fraction of micronutrients. Determination of EDTA, DTPA, HEEDTA, IDHA or EDDS
- BS EN ISO 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
AENOR, Measurement of Microplastics
- UNE 53014:2012 Plastic materials. Determination of particle size and its distribution
- UNE-EN ISO 3915:2000 PLASTICS - MEASUREMENT OF RESISTIVITY OF CONDUCTIVE PLASTICS (ISO 3915:1981)
- UNE-EN ISO 18846:2017 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)
- UNE-EN ISO 1598:2000 PLASTICS. CELLULOSE ACETATE. DETERMINATION OF INSOLUBLE PARTICLES (ISO 1598:1990)
- UNE-EN ISO 177:2017 Plastics - Determination of migration of plasticizers (ISO 177:2016)
- UNE 53272:1974 PLASTICS. DETERMINATION OF VOLATILE CONTENT.
- UNE-CEN/TS 16137:2012 EX Plastics - Determination of bio-based carbon content
- UNE-EN 15962:2011 Fertilizers - Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients
- UNE-EN 12118:1998 PLASTICS PIPING SYSTEMS. DETERMINATION OF MOISTURE CONTENT IN THERMOPLASTICS BY COULOMETRY.
Association Francaise de Normalisation, Measurement of Microplastics
- NF E75-231-2*NF ISO 9136-2:1999 Abrasive grains - Determination of bulk density - Part 2 : microgrits.
- NF T56-111:1986 Plastics. Flexible cellular materials. Determination of identation characteristics.
- NF T51-355*NF EN ISO 1598:1999 Plastics - Cellulose acetate - Determination of insoluble particles.
- NF T51-080*NF EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics
- NF EN ISO 3915:2022 Plastiques - Mesurage de la résistivité des plastiques conducteurs
- NF T51-541:1982 Plastics. Poly(ethylene terephtalate) granules. Determination of water content.
- NF EN ISO 1598:1999 Plastiques - Acétate de cellulose - Détermination des particules insolubles
- NF T51-025*NF EN ISO 177:2017 Plastics - Determination of migration of plasticizers
- NF EN ISO 177:2017 Plastiques - Détermination de la migration des plastifiants
- NF T51-003:1977 DETERMINATION OF APPARENT DENSITY OF MOULDING MATERIALS.
- NF ISO 6344-3:2022 Abrasifs appliqués - Détermination et désignation de la distribution granulométrique - Partie 3 : micrograins P240 à P5000
- NF ISO 8486-2:2007 Abrasifs agglomérés - Détermination et désignation de la distribution granulométrique - Partie 2 : micrograins F230 à F2000
- NF T51-176:2014 Plastics - Determination of water content
- NF T51-176*NF EN ISO 15512:2019 Plastics - Determination of water content
- NF T51-080:1999 Plastics. Measurement of resistivity of conductive plastics.
- NF X34-126*NF EN ISO 18846:2016 Solid biofuels - Determination of fines content in samples of pellets
- NF X21-014:2012 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size.
- NF V04-389:1985 Caseins and caseinates. Determination of scorched particles content.
- NF T54-935*NF EN 12118:1997 Plastics piping systems. Determination of moisture content in thermoplastics by coulometry.
- NF T51-271:1976 Plastics. Aqueous dispersions of homopolymers or copolymers. Determination of particle content by sieving.
- NF EN 15962:2011 Engrais - Dosage de la teneur en oligo-élément complexé et de la fraction complexée des oligo-éléments
- NF T51-046*NF EN ISO 1265:2007 Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles.
- NF U42-607*NF EN 13366:2001 Fertilizers - Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients
- NF U42-150*NF EN 15962:2011 Fertilizers - Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients
- NF T51-811*NF EN ISO 14853:2017 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production
- NF ISO 9782:1994 Plastiques renforcés - Compositions pour moulage et préimprégnés - Détermination de la teneur apparente en matières volatiles.
- NF T54-112:1980 Plastics. Sheets. Determination of the slippage. Measuring the friction coefficients.
- NF T45-152:1991 Rubber compounding ingredients. Carbon black (pelletized). Determination of fines content.
- NF EN ISO 5370:2023 Biocombustibles solides - Détermination de la teneur en fines des granulés
- NF A95-186-2:2010 Hardmetals - Metallographic determination of microstructure - Part 2 : measurement of WC grain size.
- NF A95-186-2*NF EN ISO 4499-2:2020 Hardmetals - Metallographic determination of microstructure - Part 2 : measurement of WC grain size
- NF EN ISO 4499-2:2020 Métaux-durs - Détermination métallographique de la microstructure - Partie 2 : mesurage de la taille des grains de WC
- NF EN ISO 18846:2016 Biocombustibles solides - Détermination de la teneur en fines dans les quantités de granulés
- XP U42-840*XP CEN/TS 17754:2022 Inorganic fertilizers - Determination of specific micronutrients
- NF EN ISO 16968:2015 Biocombustibles solides - Détermination des éléments mineurs
- XP CEN/TS 17754:2022 Engrais inorganiques - Détermination des oligo-éléments spécifiques
- NF EN ISO 119:1998 Plastiques - Pièces moulées à base de phénoplastes - Dosage des phénols libres. Méthode iodométrique.
RO-ASRO, Measurement of Microplastics
PL-PKN, Measurement of Microplastics
- PN C04424-02-1985 Pigments Determination of particie size distribution Microscopic method-simple
- PN C89427-1992 Cellular plastics and rubbers. Determination of linear dimensions
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Measurement of Microplastics
- GB/T 27596-2011 Dyestuffs.Determination of particle fineness.Microscope method
- GB/T 9802-1988 Air quality--Determination of total suspended particulates--Gravimetric method
- GB/T 12010.6-2010(英文版) Plastic—Poly (vinyl alcohol) (PVAL) materials—Part 6:Determination for particle size
- GB/T 12010.6-2010 Plastic.Poly(vinyl alcohol)(PVAL)materials.Part 6:Determination for particle size
- GB/T 9258.3-2000 Coated abrasives-Grain size analysis-Part 3: Determination of grain size distribution of microgrits P240 to P2500
- GB/T 9258.3-2017 Coated abrasives.Grain size analysis.Part 3:Determination of grain size distribution of microgrits P240 to P2 500
- GB/T 9348-2008 Plastics. Poly(vinyl chloride) resins. Determination of number of impurities and foreign particles
- GB/T 14694-1993 Plastics. Determination of compressive elastic modulus
- GB/T 3488.2-2018 Hardmetals.Metallographic determination of microstructure.Part 2:Measurement of WC grain size
- GB/T 4616-2008 Plastics.Phenolic moulding materials.Determination of acetone-soluble matter(apparent resin content of material in the unmoulded state)
Danish Standards Foundation, Measurement of Microplastics
- DS/EN 481:1994 Workplace atmospheres-Size fraction definitions for measurement of airborne particles
- DS/EN ISO 1265:2007 Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles
- DS/EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics
- DS/EN ISO 1598:1999 Plastics - Cellulose acetate - Determination of insoluble particles
- DS/EN ISO 177:1999 Plastics - Determination of migration of plasticizers
- DS/EN ISO 15512:2009 Plastics - Determination of water content
- DS/CEN/TS 17627:2021 Plastics – Recycled plastics – Determination of solid contaminants content
- DS/ISO/R 1183:1985 Plastics for determining the density and relative density (Specific gravity) of plastics excluding cellular plastics
- DS/ISO 1133:1985 Plastics. Determination of the flow rate of thermoplastics
- DS/EN ISO 176:2005 Plastics - Determination of loss of plasticizers - Activated carbon method
- DS/CEN/TS 16137:2011 Plastics - Determination of bio-based carbon content
- DS/EN ISO 4499-2:2010 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size
- DS/EN 15962:2011 Fertilizers - Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients
- DS/EN 12118:1998 Plastics piping systems - Determination of moisture content in thermoplastics by coulometry
- DS/EN ISO 10352:2011 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area
German Institute for Standardization, Measurement of Microplastics
- DIN EN 481:1993 Workplaces atmospheres; size fraction definitions for measurement of airborne particles; German version EN 481:1993
- DIN EN ISO 1265:2007 Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles (ISO 1265:2007) English version of DIN EN ISO 1265:2007-05
- DIN EN ISO 1265:2007-05 Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles (ISO 1265:2007); German version EN ISO 1265:2007
- DIN 53583:2007-06 Testing of pigments - Determination of fines content and of loss in mass by abrasion of pelletized carbon black pigments
- DIN EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981); German version EN ISO 3915:1999
- DIN EN ISO 3915:2022-05 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022); German version EN ISO 3915:2022
- DIN 53477:1992 Testing of plastics; determination of particle size distribution of moulding materials by dry sieving analysis
- DIN 53477:2018 Testing of plastics - Determination of particle size distribution of moulding materials by dry sieving analysis
- DIN EN ISO 4484-2:2022-12 Textiles and textile products - Microplastics from textile sources - Part 2: Qualitative and quantitative evaluation of microplastics (ISO/DIS 4484-2.2:2022); German and English version prEN ISO 4484-2:2022 / Note: Date of issue 2022-11-11
- DIN EN ISO 1598:1999-09 Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990); German version EN ISO 1598:1999
- DIN EN ISO 177:2017-05 Plastics - Determination of migration of plasticizers (ISO 177:2016); German version EN ISO 177:2017
- DIN ISO 4576:2001-03 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content) (ISO 4576:1996)
- DIN EN ISO 15512:2019-09 Plastics - Determination of water content (ISO 15512:2019); German version EN ISO 15512:2019
- DIN 53477:2018-09 Testing of plastics - Determination of particle size distribution of moulding materials by dry sieving analysis
- DIN EN ISO 18846:2016 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)
- DIN 50452-1:1995-11 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 1: Microscopic determination of particles
- DIN EN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021); German and English version prEN ISO 3915:2021
- DIN CEN/TS 17627:2021-07 Plastics - Recycled plastics - Determination of solid contaminants content; German version CEN/TS 17627:2021
- DIN ISO 4576:2001 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content) (ISO 4576:1996)
- DIN EN 13366:2001 Fertilizers - Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients; German version EN 13366:2001
- DIN EN ISO 14853:2018-02 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production (ISO 14853:2016); German version EN ISO 14853:2017
- DIN 53583:2023-07 Testing of pigments - Determination of fines content and of loss in mass by abrasion of pelletized carbon black pigments / Note: Date of issue 2023-06-16*Intended as replacement for DIN 53583 (2007-06).
- DIN EN ISO 585:2000 Plastics - Unplasticized cellulose acetate - Determination of moisture content (ISO 585:1990); German version EN ISO 585:1999
- DIN EN ISO 4499-2:2020-11 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020); German version EN ISO 4499-2:2020
- DIN EN ISO 18846:2016-12 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016); German version EN ISO 18846:2016 / Note: To be replaced by DIN EN ISO 5370 (2022-03).
- DIN EN 15962:2011-04 Fertilizers - Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients; German version EN 15962:2011
- DIN 53380-3:1998 Testing of plastics - Determination of gas transmission rate - Part 3: Oxygen-specific carrier gas method for testing of plastic films and plastics mouldings
- DIN EN ISO 16968:2015-09 Solid biofuels - Determination of minor elements (ISO 16968:2015); German version EN ISO 16968:2015
- DIN EN 12118:1997-11 Plastics piping systems - Determination of moisture content in thermoplastics by coulometry; German version EN 12118:1997
国家市场监督管理总局、中国国家标准化管理委员会, Measurement of Microplastics
IT-UNI, Measurement of Microplastics
RU-GOST R, Measurement of Microplastics
- GOST R 50183-1992 Plastics. Polyvinylchloride resines. Determination of number of impurites and foreign particles
- GOST 28497-2014 Feeds, compound feeds. Method of crumbling properties granule determination
- GOST 25015-1981 Plastics celluar and foam rubber. Method for measuring linear dimensions
- GOST 26573.3-1985 Premixes. Method for determination of particle size
- GOST R 54274-2010 Aviation fuels. Determination of particulate contamination by laboratory filtration method
- GOST R 54274-2010(2019) Aviation fuels. Determination of particulate contamination by laboratory filtration method
- GOST R 54214-2010 Solid biofuels. Determination of minor elements
- GOST 11736-1978 Plastics. Method for determination of water content
- GOST R 8.775-2011 State system for ensuring the uniformity of measurements. Disperse composition of gas atmospheres. Determination of nano particle size by differential electrical mobility analysis for aerosol particles
- GOST R 54214-2015 Solid biofuels. Determination of minor elements
- GOST R 54214-2015(2019) Solid biofuels. Determination of minor elements
- GOST 34163.1-2017 Plastics. Determination of puncture impact behaviour of rigid plastics. Part 1. Non-instrumented method
- GOST EN 15962-2014 Fertilizers. Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients
PH-BPS, Measurement of Microplastics
- PNS ISO 6344-3:2021 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500
- PNS ISO 8486-2:2021 Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits F230 to F2000
Indonesia Standards, Measurement of Microplastics
- SNI 03-6444-2000 Test method for half cell potential uncoated dielectric material reinforcing steels in concrete
Group Standards of the People's Republic of China, Measurement of Microplastics
- T/CSUS 32-2021 Microplastics Determination in Sewage Raman Spectroscopy
- T/LNEMA 002-2023 Determination of micro plastics in city river — Fourier transform infrared spectroscopy
BE-NBN, Measurement of Microplastics
ES-UNE, Measurement of Microplastics
- UNE-EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)
- UNE-EN ISO 15512:2020 Plastics - Determination of water content (ISO 15512:2019)
- UNE 53272:2019 Plastics. Determination of volatile content
- UNE-EN ISO 14853:2018 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production (ISO 14853:2016)
- UNE-CEN/TS 17760:2022 Inorganic fertilizers - Determination of particle size of ammonium nitrate fertilizers of high nitrogen content (Endorsed by Asociación Española de Normalización in May of 2022.)
- UNE-EN ISO 4499-2:2021 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020)
- UNE-EN ISO 16968:2015 Solid biofuels - Determination of minor elements (ISO 16968:2015)
ES-AENOR, Measurement of Microplastics
Japanese Industrial Standards Committee (JISC), Measurement of Microplastics
- JIS K 6828-3:2003 Plastics -- Polymer dispersions -- Determination of sieve residue (gross particle and coagulum content)
- JIS K 7351:2018 Sensitive measurement method of peroxide in plastics by detecting ultra-weak photon emission
- JIS K 7251:2002 Plastics -- Determination of water content
- JIS K 6737:1999 Plastics -- Polyvinyl chloride resins -- Determination of number of impurities and foreign particles
- JIS K 7152-4:2001 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage
- JIS K 7152-4:2006 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage
GOSTR, Measurement of Microplastics
- GOST 25015-2017 Celluar plasticsand and foam rubber. Method for measuring linear dimensions
KR-KS, Measurement of Microplastics
中国有色金属工业总公司, Measurement of Microplastics
- YS/T 27-1992 Methods for measuring and counting particulate contamination on wafer surfaces
VN-TCVN, Measurement of Microplastics
- TCVN 7759-2008 Distillate Fuels.Determination of free water and particulate contamination (Visual inspection procedures)
AASHTO - American Association of State Highway and Transportation Officials, Measurement of Microplastics
- T 176-2008 Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test
- T 176-2002 Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test
- T 176-1986 Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test
- T 176-2000 Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Twentieth Edition)
YU-JUS, Measurement of Microplastics
- JUS H.B8.817-1992 Straight ammonium nitrate fertilizers of high nitrogen content - Determination of the particle size (granulometry)
- JUS H.M8.118-1982 Acces$ory materials for rubber industry. Determination of fines content in pelletized carbon black
CZ-CSN, Measurement of Microplastics
Professional Standard - Public Safety Standards, Measurement of Microplastics
- GA/T 958-2011 Collecting and packaging method for trace evidence. Rubber and plastic
Lithuanian Standards Office , Measurement of Microplastics
- LST EN ISO 3915:2001 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981)
- LST CEN/TS 17627-2021 Plastics - Recycled plastics - Determination of solid contaminants content
- LST EN ISO 1598:2000 Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990)
- LST EN ISO 15512:2009 Plastics - Determination of water content (ISO 15512:2008)
- LST EN 15962-2011 Fertilizers - Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients
- LST EN 12118-2002 Plastics piping systems - Determination of moisture content in thermoplastics by coulometry
TR-TSE, Measurement of Microplastics
- TS 3425-1979 PLASTICS-AQUEOUS DISPERSIONS OF HOMOPOLYMERS AND COPOLYMERS-DETERMINATION OF GROSS PARTICLE CONTENT BY SIEVE ANALYSIS
- TS 1853-1975 P L A S T I C S DETERMINATION OF ACETIC ACID YIELD OF UNPLASTIC1ZED CELLULOSE ACETATE
- TS 357-1979 PLASTICS-PHENOL-FORMALDEHYDE MOULDINGS-DETERMINATION OF FREE PHENOLS-IODOMETRIC METOD
AT-ON, Measurement of Microplastics
- ONR CEN/TS 17627-2021 Plastics - Recycled plastics - Determination of solid contaminants content
- OENORM EN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021)
- OENORM EN ISO 4484-2:2021 Textiles and textile products - Microplastics from textile sources - Part 2: Qualitative and quantitative evaluation of microplastics (ISO/DIS 4484-2:2021)
Liaoning Provincial Standard of the People's Republic of China, Measurement of Microplastics
- DB21/T 2751-2017 Determination of Microplastics in Seawater by Fourier Transform Microscopy Infrared Spectroscopy
SE-SIS, Measurement of Microplastics
- SIS SS-ISO 1265:1987 Plastics - Polyvinyl chloride resins - Determination of number of impurities and foreign particles
American National Standards Institute （ANSI), Measurement of Microplastics
- ANSI/ASTM D2276:2006 Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
- ANSI/ASTM D1708:1997 Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
- ANSI/ASTM D6986:2010 Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
工业和信息化部, Measurement of Microplastics
- SH/T 1824-2019 Determination of antimony content in plastic thermoplastic polyesters
Association of German Mechanical Engineers, Measurement of Microplastics
- VDI 3492-2004 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
- VDI 3492-2013 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
UY-UNIT, Measurement of Microplastics
NL-NEN, Measurement of Microplastics
- NEN 5945-1990 Aggregates for concrete - Determination of lightweight partiele content
Shandong Provincial Standard of the People's Republic of China, Measurement of Microplastics
- DB37/T 2618-2014 Determination of Selenium Content in Microelement Water-Soluble Fertilizer
HU-MSZT, Measurement of Microplastics
(U.S.) Ford Automotive Standards, Measurement of Microplastics
ZA-SANS, Measurement of Microplastics
- SANS 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
CEN - European Committee for Standardization, Measurement of Microplastics