ZH
RU
ES
particulate organic carbon
particulate organic carbon, Total:173 items.
In the international standard classification, particulate organic carbon involves: Fertilizers, Products of the chemical industry, Analytical chemistry, Agricultural machines, implements and equipment, Soil quality. Pedology, Environmental protection, Raw materials for rubber and plastics, Construction materials, Fuels, Domestic electrical appliances in general, Powder metallurgy, Water quality, Paints and varnishes, Tobacco, tobacco products and related equipment, Air quality, Internal combustion engines, Internal combustion engines for road vehicles, Particle size analysis. Sieving, Non-textile floor coverings, Sports equipment and facilities, Wastes, Shipbuilding and marine structures in general, Installations in buildings, Radiocommunications.
Professional Standard - Chemical Industry, particulate organic carbon
Taiwan Provincial Standard of the People's Republic of China, particulate organic carbon
Association Francaise de Normalisation, particulate organic carbon
- NF T94-419-1*NF EN 12915-1:2009 Products used for the treatment of water intended for human consumption - Granular activated carbon - Part 1 : virgin granular activated carbon.
- NF X31-516:2007 Qualité du sol - Fractionnement granulodensimétrique des matières organiques particulaires du sol dans l'eau
- NF X34-114-1*NF EN ISO 17831-1:2016 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1 : pellets
- NF P62-308*NF EN 13845:2017 Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification
- NF V37-209*NF ISO 20779:2018 Cigarettes - Generation and collection of total particulate matter using a routine analytical smoking machine with an intense smoking regime
- NF ISO 20779:2018 Cigarettes - Génération et collecte de la matière particulaire totale au moyen d'une machine à fumer analytique de routine avec un régime de fumage intense
- NF EN 17763:2022 Centrifugeuses - Centrifugeuses à combustible pour la marine - Détermination des performances de séparation des particules et du débit certifié (CFR) dans des conditions d'essai définies
- NF P90-159*NF EN 17467:2022 Surfaces for sports areas - Test method for the determination of the residual deformation of synthetic or organic infill granules after static load
- NF X34-114-2*NF EN ISO 17831-2:2016 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2 : briquettes
- NF P18-650-6:2014 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption
- NF P18-650-6*NF EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption
- NF ISO 20779/A1:2020 Cigarettes - Génération et collecte de la matière particulaire totale au moyen d'une machine à fumer analytique de routine avec un régime de fumage intense - Amendement 1
- NF P18-650-7*NF EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7 : determination of the particle density of filler - Pyknometer method.
Group Standards of the People's Republic of China, particulate organic carbon
- T/NJ 1230-2020 Complete processing equipment for spherical granular organic fertilizer
- T/CPCIF 0132-2021 Technical specification for granular activated carbon adsorption treatment of organic dye wastewater
- T/CAQI 34-2017 Graduation for particle purifying performance of outside air clean ventilator
(U.S.) Ford Automotive Standards, particulate organic carbon
Japanese Industrial Standards Committee (JISC), particulate organic carbon
- JIS K 6219:1997 Testing methods of properties of pellets of carbon black for rubber industry
IT-UNI, particulate organic carbon
American Society for Testing and Materials (ASTM), particulate organic carbon
- ASTM D225-01 Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
- ASTM D225-03 Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
- ASTM D225-04 Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
- ASTM D225-02 Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
- ASTM D225-65(1978) Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
- ASTM D5861-95(2002) Standard Guide for Significance of Particle Size Measurements of Coating Powders
- ASTM D5861-07(2013) Standard Guide for Significance of Particle Size Measurements of Coating Powders
- ASTM F1428-92(2005) Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
- ASTM D225-07 Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
- ASTM A983/A983M-01 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
- ASTM A983/A983M-98 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
- ASTM A983/A983M-05 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
- ASTM A983/A983M-04 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
- ASTM A983/A983M-06(2021) Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
- ASTM A983/A983M-06(2016) Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
- ASTM F1428-92(1999) Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
- ASTM F1428-23 Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
- ASTM F1428-92(2017) Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
- ASTM D7505/D7505M-17(2023) Standard Specification for Self-Adhesive Polyester Fabric Reinforced Polymer-Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
- ASTM D7530/D7530M-17(2023) Standard Specification for Self-Adhesive Glass Fiber Fabric Reinforced Polymer-Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
Danish Standards Foundation, particulate organic carbon
- DS/EN 15210-1:2010 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets
- DS/CEN/TS 15639:2010 Solid recovered fuels - Determination of mechanical durability of pellets
- DS/CEN/TR 17554:2020 Ambient air – Application of EN 16909 for the determination of elemental carbon (EC) and organic carbon (OC) in PM10 and PMcoarse
- DS/EN 13845:2005 Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification
- DS/EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- DS/EN 15210-2:2011 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes
- DS/EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
Lithuanian Standards Office , particulate organic carbon
- LST EN 15210-1-2010 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets
- LST EN 13845-2006 Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification
- LST EN 1097-6-2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- LST EN 1097-6+AC-2003 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- LST EN 1097-6+AC-2003/A1-2005 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- LST EN 15210-2-2011 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes
- LST EN 1097-7-2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
Korean Agency for Technology and Standards (KATS), particulate organic carbon
- KS M ISO 17831-1:2021 Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 1: Pellets
- KS I ISO 8245:2010 Water quality－Guidelines for the determination of total orgaic carbon(TOC) and dissolved organic carbon(DOC)
- KS M ISO 10142-2004(2019) Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of grain stability using a laboratory vibration mill
- KS I ISO 11277-2005(2015) Soil quality－Determination of particle size distribution inmineral soil material(Method by sieving and sedimentationfollowing removal of soluble salts, organic matter and carbonates)
- KS I ISO 11277-2005(2021) Soil quality－Determination of particle size distribution inmineral soil material(Method by sieving and sedimentationfollowing removal of soluble salts, organic matter and carbonates)
- KS H ISO 20773-2014(2019) Cigarettes — Determination of nicotine-free dry particulate matter and nicotine in sidestream smoke — Method using a routine analytical linear smoking machine equipped with a fishtail chimney
- KS M 9235-2001 Water quality－Evaluation of “ultimate” aerobic biodegradablity of organic compounds in aqueous medium [Method by analysis of dissolved organic carbon(DOC)]
- KS I ISO 7827-2008(2018) Water quality－Evaluation in an aqueous medium of the “ultimate”aerobic biodegradability of organic compounds－Method by analysis of dissolved organic carbon(DOC)
KR-KS, particulate organic carbon
- KS M ISO 17831-1-2021 Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 1: Pellets
German Institute for Standardization, particulate organic carbon
- DIN EN ISO 17831-1:2016-05 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015); German version EN ISO 17831-1:2015
- DIN EN ISO 17831-1:2016 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015)
- DIN CEN/TS 15639:2010-11*DIN SPEC 1179:2010-11 Solid recovered fuels - Determination of mechanical durability of pellets; German version CEN/TS 15639:2010
- DIN CEN/TS 15639:2007 Solid recovered fuels - Methods for the determination of mechanical durability of pellets; German version CEN/TS 15639:2007
- DIN EN 13845:2017-12 Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification; German version EN 13845:2017
- DIN EN 17467:2020 Surfaces for sports areas - Test method for the determination of the residual deformation of synthetic or organic infill granules after static load; German and English version prEN 17467:2020
- DIN EN 17467:2022-05 Surfaces for sports areas - Test method for the determination of the residual deformation of synthetic or organic infill granules after static load; German version EN 17467:2022
- DIN EN 17467:2022 Surfaces for sports areas - Test method for the determination of the residual deformation of synthetic or organic infill granules after static load
- DIN EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- DIN EN ISO 17831-2:2016-05 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes (ISO 17831-2:2015); German version EN ISO 17831-2:2015
- DIN EN 17516:2022 Waste - Characterization of granular solids with potential for use as construction material - Compliance leaching test - Up-flow percolation test; German and English version prEN 17516:2022
- DIN EN 12457-1:2003-01 Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 1: One stage batch test at a liquid to solid ration of 2 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-1:2002
- DIN EN 12457-2:2003-01 Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-2:2002
- DIN EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids; German version EN 1097-3:1998
- DIN EN 1097-6:2022-05 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2022
- DIN EN 1097-6:2005 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2000 + AC:2002 + A1:2005
- DIN EN 1097-6:2020 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German and English version prEN 1097-6:2020
- DIN EN 12457-4:2003 Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with limited size redu
- DIN EN 1097-7:2022-12 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German version EN 1097-7:2022
- DIN EN 1097-7:2022 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
- DIN EN 17763:2022-12 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions; German version EN 17763:2022
- DIN EN 17763:2022 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
- DIN EN 1097-7:2020 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German and English version prEN 1097-7:2020
- DIN EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; English version of DIN EN 1097-7:2008-06
ES-UNE, particulate organic carbon
- UNE-EN ISO 17831-1:2016 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015)
- UNE-EN 17467:2022 Surfaces for sports areas - Test method for the determination of the residual deformation of synthetic or organic infill granules after static load
- UNE-EN ISO 17831-2:2016 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes (ISO 17831-2:2015)
- UNE-EN 17763:2023 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, particulate organic carbon
- GB/T 7702.22-1997 Standard test method for granular activated carbon from coal--Determination of breakthrough sulphur capacity
- GB/T 17665-1999 Test method of wooden granular activated carbon adsorption to CCI4 vapor
- GB/T 7702.19-1997 Standard test method for granultar activated carbon from coal--Determination of carbon tetrachloride (CCI4) desportion
- GB/T 7702.19-2008 Test method for granular activated carbon from coal.Determination of carbon tetrachloride(CCL(down4))desorption
- GB/T 7702.13-1997 Standard test method for granular activated carbon from coal--Determination of carbon tetrachloride adsorption
Indonesia Standards, particulate organic carbon
CEN - European Committee for Standardization, particulate organic carbon
- PD CEN/TS 15210-1:2005 Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 1: Pellets
- PD CEN/TS 15639:2007 Solid recovered fuels - Methods for the determination of mechanical durability of pellets
- PD CEN/TS 15210-2:2005 Solid biofuels - Methods for the determination of mechanicaldurability of pellets and briquettes - Part 2: Briquettes
International Organization for Standardization (ISO), particulate organic carbon
- ISO 8245:1999 Water quality - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)
- ISO 20779:2018 Cigarettes — Generation and collection of total particulate matter using a routine analytical smoking machine with an intense smoking regime
- ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
- ISO 17175:2017 Bidis - Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine
European Committee for Standardization (CEN), particulate organic carbon
- EN ISO 17831-1:2015 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015)
- CEN/TS 15639:2010 Solid recovered fuels - Determination of mechanical durability of pellets
- EN 1097-2:2010 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
- EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- FprEN 17467-2021 Surfaces for sports areas - Test method for the determination of the residual deformation of synthetic or organic infill granules after static load
- EN 12457-4:2002 Characterisation of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
- FprEN 1097-6-2021 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- PREN 1097-7-2020 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
- EN 1097-7:2022 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
- prEN 17763-2021 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
- EN 17763:2022 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
- EN ISO 17831-2:2015 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes (ISO 17831-2:2015)
- EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
- EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
RU-GOST R, particulate organic carbon
- GOST R 55110-2012 Solid biofuels. Determination of mechanical durability of pellets and briquettes. Part 1. Pellets
- GOST R 55121-2012 Solid recovered fuels. Determination of mechanical durability of pellets
- GOST R ISO 12981-1-2014 Carbonaceous materials for the production of aluminium. Calcined coke. Determination of the reactivity to carbon dioxide. Part 1. Loss in mass method
- GOST R 55122-2012 Solid recovered fuels. Determination of durability of pellets and briquettes
British Standards Institution (BSI), particulate organic carbon
- BS DD CEN/TS 15639:2010 Solid recovered fuels. Determination of mechanical durability of pellets
- BS ISO 17175:2017 Bidis. Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine
- BS DD CEN/TS 15639:2007 Solid recovered fuels.Methods for the determination of mechanical durability of pellets
- DD CEN/TS 15639:2007 Solid recovered fuels —
Methods for the
determination of mechanical durability
of pellets
- BS EN 1097-6:2000 Tests for mechanical and physical properties of aggregates - Determination of particle density and water absorption
- BS EN 1097-6:2013 Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
- BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
- BS DD CEN/TS 15210-1:2005 Solid biofuels — Methods for the determination of mechanical durability of pellets and briquettes — Part 1: Pellets
- BS DD CEN/TS 15210-1:2006 Solid biofuels - Method for the determination of mechanical durability of pellets and briquettes - Pellets
- BS ISO 20779:2018+A1:2019 Cigarettes. Generation and collection of total particulate matter using a routine analytical smoking machine with an intense smoking regime
- BS EN 17467:2022 Surfaces for sports areas. Test method for the determination of the residual deformation of synthetic or organic infill granules after static load
- 19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
- 20/30396549 DC BS EN 17467. Surfaces for sports areas. Test method for the determination of the residual deformation of synthetic or organic infill granules after static load
- BS EN 1097-6:2022 Tracked Changes. Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
- BS EN 17763:2022 Centrifuges. Marine fuel centrifuges. Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
- BS EN 1097-7:2022 Tracked Changes. Tests for mechanical and physical properties of aggregates. Determination of the particle density of filler. Pyknometer method
- BS EN 13443-1:2002 Water conditioning
equipment inside
buildings — Mechanical
filters —
Part 1: Particle rating 80 4m to 150 4m —
Requirements for performances, safety
and testing
- BS EN 13443-1:2002(2008) Water conditioning
equipment inside
buildings — Mechanical
filters —
Part 1: Particle rating 80 4m to 150 4m —
Requirements for performances, safety
and testing
International Telecommunication Union (ITU), particulate organic carbon
- ITU-T P.75 FRENCH-1988 STANDARD CONDITIONING METHOD FOR HANDSETS WITH CARBON MICROPHONES
- ITU-T P.75 SPANISH-1988 STANDARD CONDITIONING METHOD FOR HANDSETS WITH CARBON MICROPHONES
- ITU-T P.75-1989 Standard Conditioning Method for Handsets with Carbon Microphones - Telephone Transmission Quality (Study Group XII) 1 pp
- ITU-T P.75-1988 STANDARD CONDITIONING METHOD FOR HANDSETS WITH CARBON MICROPHONES
SAE - SAE International, particulate organic carbon
- SAE AIR6037-2010 Aircraft Exhaust Nonvolatile Particle Matter Measurement Method Development
- SAE AIR6037A-2018 Aircraft Exhaust Nonvolatile Particle Matter Measurement Method Development
- SAE ARP6320-2018 Procedure for the Continuous Sampling and Measurement of Non-Volatile Particulate Matter Emissions from Aircraft Turbine Engines (Includes Access to Additional Content)
PL-PKN, particulate organic carbon
Professional Standard - Customs, particulate organic carbon
- HS/T 5-2006 Identification of organically modified calcium carbonate
未注明发布机构, particulate organic carbon
- STANAG 1411 NORME DE QUANTIFICATION DES CARACT?RISTIQUES DES ABSORBANTS GRANULAIRES DE DIOXYDE DE CARBONE (CO2) UTILIS?S DANS DES APPLICATIONS DE PLONG?E ET HYPERBARES (ED 3; To obtain please contact your national Defense Standardization Office or the NATO Standardiz
- DIN EN 1097-6:2001 Tests for mechanical and physical properties of aggregates — Part 6: Determination of particle density and water absorption
- DIN EN 1097-7:1999 Tests for mechanical and physical properties of aggregates — Part 7: Determination of the particle density of filler — Pycnometer method
Professional Standard - Automobile, particulate organic carbon
- QC/T 1001-2015 Evaluating filtration performance of lubricating oil filters for automobiles.Method of particle counting
HU-MSZT, particulate organic carbon
API - American Petroleum Institute, particulate organic carbon
- API PUBL 344-1998 Critical Review of Source Sampling and Analysis Methodologies for Characterizing Organic Aerosol and Fine Particulate Source Emission Profiles
国家市场监督管理总局、中国国家标准化管理委员会, particulate organic carbon
- GB/T 37167-2018 Particle—Separation and measurement of trace magnetic materials(elements) in inorganic powder
AENOR, particulate organic carbon
- UNE-EN 13845:2017 Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification
- UNE-EN 1097-6:2014 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- UNE-EN 1097-7:2009 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
GOSTR, particulate organic carbon
- GOST 34090.1-2017 Solid biofuel. Determination of mechanical durability of pellets and briquettes. Part 1. Pellets
NATO - North Atlantic Treaty Organization, particulate organic carbon
- ADIVP-03-2013 STANDARD TO QUANTIFY THE CHARACTERISTICS OF GRANULAR CARBON DIOXIDE (CO2) ABSORBENT MATERIAL FOR DIVING AND HYPERBARIC APPLICATIONS (ED A@ Ver 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office webs
Society of Automotive Engineers (SAE), particulate organic carbon
- SAE ARP6320A-2021 Procedure for the Continuous Sampling and Measurement of Non-Volatile Particulate Matter Emissions from Aircraft Turbine Engines
AT-ON, particulate organic carbon
- OENORM EN 17763-2021 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
Standard Association of Australia （SAA）, particulate organic carbon
- AS 4351.2:1996 Biodegradability - Organic compounds in an aqueous medium - Determination by analysis of dissolved organic carbon (DOC)
Defense Logistics Agency, particulate organic carbon