ZH
RU
ES

thermal stability temperature

thermal stability temperature, Total:500 items.

In the international standard classification, thermal stability temperature involves: Paints and varnishes, Electricity. Magnetism. Electrical and magnetic measurements, Insulating materials, Products of the textile industry, Protection of and in buildings, Construction materials, Heat recovery. Thermal insulation, Electromechanical components for electronic and telecommunications equipment, Protection against fire, Physics. Chemistry, Adhesives, Petroleum products in general, Materials for aerospace construction, Pesticides and other agrochemicals, Products of the chemical industry, Paint ingredients, Lubricants, industrial oils and related products, Coals, Materials for the reinforcement of composites, Burners. Boilers, Standardization. General rules, Environmental testing, Plastics, Semiconductor devices, Non-textile floor coverings, Waxes, bituminous materials and other petroleum products, Raw materials for rubber and plastics, Farm buildings, structures and installations, Resistors, Structures of buildings, Fuels, Refractories, Analytical chemistry, Magnetic materials, Farming and forestry, Thermodynamics and temperature measurements, Leather technology, Installations in buildings, Textile fibres, Furniture, Environmental protection, Protection against dangerous goods, Glass, Insulating fluids, Testing of metals, Equipment for the metallurgical industry, Pulps, Organic chemicals, Non-ferrous metals, Hydraulic fluids, Pipeline components and pipelines, Valves, Elements of buildings, Reinforced plastics, Rubber and plastics products, Heat treatment, Road vehicle systems, Rubber, Insulation, Safety of machinery, Ergonomics, Mechanical testing, Semiconducting materials, Electrical wires and cables, Test conditions and procedures in general, Graphic technology, Fibre optic communications, Iron and steel products.

ZA-SANS, thermal stability temperature

SANS 5160:2007 Paints and varnishes - Temperature stability
SANS 5976:2005 Heat-cool stability of wax polishes

Japanese Industrial Standards Committee (JISC), thermal stability temperature

JIS C 2143-6:2014 Electrical insulating materials -- Thermal endurance properties -- Part 6: Determination of thermal endurance indices (temperature index and relative thermal endurance index) of an insulating material using the fixed time frame method
JIS K 7212:1999 Plastics -- Determination of thermal stability of thermoplastics -- Oven method
JIS A 1420:1999 Determination of steady-state thermal transmission properties -- Hot box method
JIS K 2540:1989 Testing method for thermal stability of lubricating oils
JIS K 7206:1999 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
JIS K 7206:2016 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
JIS H 7851:2005 Testing method for heat resistance under temperature gradient
JIS K 2540:2000 Petroleum products -- Lubricating oils -- Determination of thermal stability
JIS K 7193:1999 Plastics -- Determination of ignition temperature using a hot-air furnace
JIS K 7193:2010 Plastics -- Determination of ignition temperature using a hot-air furnace
JIS C 1612:1988 General rules for expression of the performance of radiation thermometers

Korean Agency for Technology and Standards (KATS), thermal stability temperature

KS K 0757-2011 Test method for effects of temperature on stability of geotextiles
KS L ISO 8497:2006 Thermal insulation－Determination of steady-state thermaltransmission properties of thermal insulation for circular pipes
KS F 2277-2017 Thermal insulation－Determination of steady－state thermal transmission properties－Calibrated and guarded hot box
KS M ISO 10363-2009(2019) Hot-melt adhesives－Determination of thermal stability
KS K 0758-1998 TESTING METHOD FOR EFFECTS OF TEMPERATURE STABILITY OF GEOSYNTHETICS
KS M ISO 10363:2009 Hot-melt adhesives－Determination of thermal stability
KS K 0757-2015 Test method for effects of temperature on stability of geotextiles
KS M 2171-2001 Testing method for thermal and oxidation stability of heat treating oils
KS M 2171-1986 Testing method for thermal and oxidation stability of heat treating oils
KS K 0758-2001 TESTING METHOD FOR EFFECTS OF TEMPERATURE STABILITY OF GEOSYNTHETICS
KS K 0757-2021 Standard test method for effects of temperature on stability of geotextiles
KS K ISO 23999-2010(2015) Resilient floor coverings－Determination of dimensional stability and curling after exposure to heat
KS K ISO 23999:2021 Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat
KS M 3071-2004(2019) Plastics􀫥Determination of thermal stability of thermoplastics􀫥Oven method
KS M 5133-1995 Testing methods of heat stability for pigments
KS L ISO 8497-2006(2021) Thermal insulation－Determination of steady-state thermaltransmission properties of thermal insulation for circular pipes
KS L ISO 8497-2006(2016) Thermal insulation－Determination of steady-state thermaltransmission properties of thermal insulation for circular pipes
KS B 6203-2002(2017) Maximum working pressure and super heated steam temperature of stationary steam boilers
KS B 6203-1964 Maximum working pressure and super heated steam temperature of stationary steam boilers
KS M 2022-2007(2022) Testing method for thermal stability of lubricating oils
KS M 2022-1973 Testing method for thermal stability of lubricating oils
KS M 2022-1987 Testing method for thermal stability of lubricating oils
KS M ISO 306-2015(2020) Plastics－Thermoplastic materials－Determination of Vicat softening temperature(VST)
KS K 0150-2007(2012) Test method for dispersion stability of disperse dyes at high temperature
KS M 2022-2007 Testing method for thermal stability of lubricating oils
KS M 5133-2001(2006) TESTING METHODS OF HEAT STABILITY FOR PIGMENTS
KS M ISO 11645:2002 Leather－Heat stability of industrial－glove leather
KS M ISO 11645:2007 Leather－Heat stability of industrial－glove leather
KS L ISO 8301:2006 Thermal insulation－Determination of steady-state thermal resistance and related properties－Heat flow meter apparatus
KS L ISO 8302:2006 Thermal insulation－Determination of steady-state thermal resistance and related properties－Guarded hot plate apparatus
KS F 2277-2017(2022) Thermal insulation－Determination of steady－state thermal transmission properties－Calibrated and guarded hot box
KS L ISO 8301-2006(2016) Thermal insulation－Determination of steady-state thermal resistance and related properties－Heat flow meter apparatus
KS M 2022-2007(2017) Testing method for thermal stability of lubricating oils
KS M 2171-2018 Testing method for thermal and oxidation stability of heat treating oils
KS L ISO 8302-2006(2016) Thermal insulation－Determination of steady-state thermal resistance and related properties－Guarded hot plate apparatus
KS L ISO 8302-2006(2021) Thermal insulation－Determination of steady-state thermal resistance and related properties－Guarded hot plate apparatus

Association Francaise de Normalisation, thermal stability temperature

NF P75-208/A1:2006 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions.
NF P75-208:1997 Thermal insulating products for building applications. Determination of dimensional stability under specified temperature and humidity conditions.
NF EN 1604:2013 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la stabilité dimensionnelle dans des conditions de température et d'humidité spécifiées
NF P75-208*NF EN 1604:2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
NF P75-207/A1:2006 Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 oC/50 % relative humidity).
NF T76-120*NF EN ISO 10363:1995 Hot-melt adhesives. Determination of thermal stability.
NF EN ISO 10363:1995 Adhésifs thermofusibles - Détermination de la stabilité thermique.
NF U57-060:1991 Greenhouses and greenhouse equipment. Stability requirements for the construction of flat greenhouses.
NF T30-502:1977 Thermohardening powder paints. Determination of the agglomeration temperature.
NF EN 1108:1999 Feuilles souples d'étanchéité - Feuilles d'étanchéité de toiture bitumineuses - Détermination de la stabilité de forme lors d'une variation cyclique de température
NF P84-102*NF EN 1108:1999 Flexible sheets for waterprooffing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclic temperature change
NF EN ISO 306:2022 Plastiques - Matières thermoplastiques - Détermination de la température de ramollissement Vicat (VST)
NF C96-051*NF EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET)
NF T51-224-1:2011 Plastics - Determination of the thermal stability by over drying (floating platen chamber) - Part 1 : general
NF EN 62373:2006 Essai de stabilité de température en polarisation pour transistors à effet de champ métal-oxyde-semiconducteur (MOSFET)
NF T30-507:1981 Thermosetting powder paints. Evaluation of storage stability.
NF EN ISO 8990:1996 Isolation thermique - Détermination des propriétés de transmission thermique en régime stationnaire - Méthode à la boîte chaude gardée et calibrée.
NF P85-515:1985 Sealants. Plastic type mastics for packing seals. Determination of resistance to heat.
NF T51-021:1997 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST).
NF ISO 1432:2021 Caoutchouc vulcanisé ou thermoplastique - Détermination de la rigidité à basse température (Essai Gehman)
NF T30-506:1981 Thermosetting powder paints. Determination of the gel time at a given temperature.
NF ISO 6249:2021 Produits pétroliers - Détermination de la stabilité à l'oxydation thermique des carburéacteurs
NF P62-111:2012 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat.
NF P62-111:1994 Resilient floor coverings. Determination of dimensional stability and curling after exposure to heat.
NF EN 15818:2011 Revêtements bitumineux épais modifiés aux polymères pour imperméabilisation - Détermination de la stabilité dimensionnelle à haute température

CEN - European Committee for Standardization, thermal stability temperature

EN 1604:1996 Thermal Insulating Products for Building Applications - Determination of Dimensional Stability under Specified Temperature and Humidity Conditions
EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

German Institute for Standardization, thermal stability temperature

DIN EN 1604:2007 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions(includes Amendment A1:2006); English version of DIN EN 1604:2007-06
DIN EN 1604:2013-05 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions; German version EN 1604:2013
DIN EN 1604:2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions; German version EN 1604:2013
DIN EN 1108:1999 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes; German version EN 1108:1999
DIN 53461:1987 Testing of plastics; determination of heat deflection temperature under load
DIN EN ISO 10363:1995-11 Hot-melt adhesives - Determination of thermal stability (ISO 10363:1992); German version EN ISO 10363:1995
DIN IEC 60404-12:1999 Magnetic materials - Part 12: Guide to methods of assessment of temperature capability of interlaminar insulation coatings (IEC 60404-12:1992)
DIN EN ISO 8497:1996 Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994); German version EN ISO 8497:1996
DIN EN 1108:1999-10 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes; German version EN 1108:1999
DIN 51371:2008 Liquid fuels - Determination of thermal stability of fuel oil EL
DIN EN 13763-2:2021-06 Explosives for civil uses - Detonators and detonating cord relays - Part 2: Verification of thermal stability at high temperatures; German and English version prEN 13763-2:2021 / Note: Date of issue 2021-04-30*Intended as replacement for DIN EN 13763-2...
DIN EN ISO 8497:1996-09 Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994); German version EN ISO 8497:1996
DIN EN 62373:2007 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) (IEC 62373:2006); German version EN 62373:2006
DIN 51371:2008-08 Liquid fuels - Determination of thermal stability of fuel oil EL
DIN EN 62373:2007-01 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) (IEC 62373:2006); German version EN 62373:2006
DIN 17052-1:2000 Heat treatment furnaces - Part 1: Requirements for temperature uniformity
DIN ISO 815:2000 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures (ISO 815:1991 + ISO 815:1991/Cor.1:1993)
DIN EN ISO 23999:2012 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2008); German version EN ISO 23999:2012
DIN EN ISO 8990:1996 Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box (ISO 8990:1994); German version EN ISO 8990:1996
DIN EN 1228:1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness; German version EN 1228:1996
DIN 51545:2023-10 Testing of lubricants and related products - Determination of the temperature stability of turbine oils / Note: Date of issue 2023-09-01

Lithuanian Standards Office , thermal stability temperature

LST EN 1604-2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
LST EN 1604+AC-2003 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
LST EN 1604+AC-2003/A1-2007 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
LST EN ISO 10363:2000 Hot-melt adhesives - Determination of thermal stability (ISO 10363:1992)
LST EN ISO 8497:2000 Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994)
LST EN 1108-2001 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes
LST EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2004)

Danish Standards Foundation, thermal stability temperature

DS/EN 1604:2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
DS/EN ISO 10363:1996 Hot-melt adhesives - Determination of thermal stability
DS/EN ISO 8497:1997 Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes
DS/EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
DS/EN ISO 8990:1997 Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box
DS/EN 1108:2000 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes
DS/EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET)
DS/INSTA 216:1990 Plastics pipes. Thermoanalytic test methods for the determination on oxidation stability
DS/EN ISO 15908:2003 Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives
DS/ISO 8130-8:2021 Coating powders – Part 8: Assessment of the storage stability of thermosetting powders

European Committee for Standardization (CEN), thermal stability temperature

EN 1604:2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
prEN 495-1-1991 Thermoplastic and elastomeric roofing and sealing sheets; determination of high temperature dimensional stability
EN ISO 10363:1995 Hot-Melt Adhesives - Determination of Thermal Stability (ISO 10363 : 1992)
EN 1108:1999 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes
EN ISO 306:2022 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
EN ISO 306:1996 Plastics - Thermoplastic Materials - Determination of Vicat Softening Temperature (VST) ISO 306:1994
EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
EN ISO 8497:1996 Thermal Insulation - Determination of Steady-State Thermal Transmission Properties of Thermal Insulation for Circular Pipes ISO 8497: 1994
prEN 13763-2-2021 Explosives for civil uses - Detonators and detonating cord relays - Part 2: Verification of thermal stability at high temperatures
EN ISO 23999:2021 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2021)
EN ISO 23999:2018 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat
EN 434:1994 Resilient Floor Coverings - Determination of Dimensional Stability and Curling After Exposure to Heat
prEN 434-1990 Resilient floorcoverings; determination of dimensional stability and curling after exposure to heat
EN ISO 23999:2012 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat
EN 10273:2007 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
EN 10273:2000 Hot Rolled Weldable Steel Bars for Pressure Purposes with Specified Elevated Temperature Properties
EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties

AENOR, thermal stability temperature

UNE-EN 1604:2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
UNE 26377:1987 BRAKE FLUIDS. HIGH TEMPERATURE STABILITY.
UNE-EN ISO 10363:1996 HOT-MELT ADHESIVES. DETERMINATION OF THERMAL STABILITY. (ISO 10363:1992).
UNE 31009:1954 EUIPMENT FOR STABILITY TEST OF NITROCELULOSES OF COLLOIDAL POWDERS, TO A HIGHER TEMPERATURE THAN 100 DEGREES CENTIGRADES.
UNE 53340-1:2004 Plastics. Acrylics sheets. Determination of thermal stability.
UNE 53246:1981 PLASTICS. DETERMINATION OF DIMENSION STABILITY OF THERMOPLASTIC MOULDED ARTICLES
UNE-EN 1108:2000 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes
UNE 31012:1954 STABILITY TEST OF NITROCELULOSES OR OF COLLOIDAL POWDERS TO HIGH TEMPERATURE, BY OBSERVATION WITH TEST PAPER TO VOILET METHYL.
UNE-EN ISO 8497:1997 THERMAL INSULATION. DETERMINATION OF STEADY-STATE THERMAL TRANSMISSION PROPERTIES OF THERMAL INSULATION FOR CIRCULAR PIPES. (ISO 8497:1994).
UNE-EN ISO 306:2015 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)

British Standards Institution (BSI), thermal stability temperature

BS EN 1604:2013 Thermal insulating products for building applications. Determination of dimensional stability under specified temperature and humidity conditions
BS ISO 29472:2008+A1:2014 Thermal insulating products for building applications. Determination of dimensional stability under specified temperature and humidity conditions
BS EN 1604:1996 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
BS EN ISO 10363:1995 Hot-melt adhesives - Determination of thermal stability
PD ISO/TS 4667:2022 Coal. Determination of the thermal stability and thermal fragmentation
BS EN 62059-32-1:2012 Electricity metering equipment. Dependability. Durability. Testing of the stability of metrological characteristics by applying elevated temperature
PD IEC/TR 62518:2009 Rare earth sintered magnets. Stability of the magnetic properties at elevated temperatures
BS EN ISO 8497:1997 Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes
BS 4875 Pt.2:1985 Strength and stability of furniture. Methods for determination of stability of chairs and stools
BS 4875 Pt.4:1985 Strength and stability of furniture. Methods for determination of stability of settees
BS 4875-5:2001 Strength and stability of furniture - Requirements for strength, durability and stability of tables and trolleys for domestic and contract use
BS EN ISO 306:2013 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
BS EN ISO 22007-3:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. Temperature wave analysis method
BS EN 1108:2000 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes
BS EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET)
BS 4875-8:1998 Furniture - Strength and stability of furniture - Methods for determination of stability of non-domestic storage furniture
BS EN 13631-2:2003 Explosives for civil uses - High explosives - Determination of thermal stability of explosives
BS EN 13631-2:2002(2003) Explosives for civil uses - High explosives - Determination of thermal stability of explosives
BS EN 13631-2:2002 Civil Explosives High Explosives Determination of Thermal Stability of Explosives
BS 4875-5:2009 Strength and stability of furniture - Requirements for strength, durability and stability of tables and trolleys for domestic use
BS EN ISO 75-3:2004 Plastics - Determination of temperature of deflection under load - High-strength thermosetting laminates and long-fibre-reinforced plastics
BS ISO 815-1:2014 Rubber, vulcanized or thermoplastic. Determination of compression set. At ambient or elevated temperatures
BS ISO 815-1:2009 Rubber, vulcanized or thermoplastic. Determination of compression set. At ambient or elevated temperatures
BS ISO 815-1:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - At ambient and elevated temperatures
BS EN ISO 8990:1996 Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box
BS 2782-1 Method 130A:1991 Methods of testing plastics. Thermal properties. Determination of the thermal stability of polyvinyl chloride by the Congo red method
BS 4875-1:2001 Strength and stability of furniture - Requirements for the strength and durability of the structure of domestic and contract seating
DD 248-1999 Determination of the hot storage stability of modified bitumen binders
BS EN 15818:2011 Polymer modified bituminous thick coatings for waterproofing. Determination of dimensional stability at high temperature
BS EN 62005-2:2001 Reliability of fibre optic interconnecting devices and passive optical components - Quantitative assessment of reliability based on accelerated ageing tests - Temperature and humidity, steady state

Taiwan Provincial Standard of the People's Republic of China, thermal stability temperature

CNS 13482-1995 Method of Test for Effects of Temperatures on Stability of Geotextiles
CNS 4393-1978 Method of Test for Vicat Softening Temperature of Thermoplastics
CNS 12212-1988 Method of Test for Thermal Oxidation Stability of Gear Lubricants
CNS 15102-2007 Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)

International Organization for Standardization (ISO), thermal stability temperature

ISO 29472:2008 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
ISO 8497:1994 Thermal insulation; determination of steady-state thermal transmission properties of thermal insulation for circular pipes
ISO 29472:2008/Amd 1:2014 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions; Amendment 1
ISO 10363:1992 Hot-melt adhesives; determination of thermal stability
ISO/TS 4667:2022 Coal — Determination of the thermal stability and thermal fragmentation
ISO 306:1994 Plastics - Thermoplastic materials - Determination of Vicat Softening Temperature (VST)
ISO 306:1974 Plastics — Determination of the Vicat softening temperature of thermoplastics
ISO 11645:1993 | IULTCS Leather — Heat stability of industrial-glove leather
ISO 306:2022 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
ISO 8301:1991 Thermal insulation; determination of steady-state thermal resistance and related properties; heat flow meter apparatus
ISO/CD 22207:1980 Kraft lignin - Determination of thermal stability by Thermogravimetry
ISO/DIS 22207:2023 Kraft lignin — Determination of thermal stability by Thermogravimetry
ISO 11645:1993 Leather; heat stability of industrial-glove leather
ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
ISO 306:2013 Plastics.Thermoplastic materials.Determination of Vicat softening temperature (VST)
ISO 8302:1991 Thermal insulation; determination of steady-state thermal resistance and related properties; guarded hot plate apparatus
ISO 8990:1994 Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box
ISO 871:2006 Plastics - Determination of ignition temperature using a hot-air furnace
ISO 871:1996 Plastics - Determination of ignition temperature using a hot-air furnace
ISO 871:2022 Plastics — Determination of ignition temperature using a hot-air furnace
ISO 15908:2002 Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives
ISO/TR 4616:1980 Plastics — Determination of the thermal stability of polyvinyl chloride (PVC) — Conductometric method
ISO 8130-8:1994 Coating powders - Part 8: Assessment of the storage stability of thermosetting powders
ISO 8130-8:2021 Coating powders - Part 8: Assessment of the storage stability of thermosetting powders

Institute of Interconnecting and Packaging Electronic Circuits (IPC), thermal stability temperature

IPC TM-650 2.3.40-1995 Thermal Stability
IPC TR-465-1-1993 Round Robin Test on Steam Ager Temperature Control Stability

RU-GOST R, thermal stability temperature

GOST EN 1604-2011 Thermal insulating products in building applications. Method for determination of dimensional stability under specified temperature and humidity conditions
GOST 27037-1986 Paint materials. Method of determination of stability to temperature changes
GOST R EN 1604-2008 Thermal insulating products for building applications. Method for determination of dimensional stability under specified temperature and humidity conditions
GOST R 51368-1999 Climatic environment stability test methods for machines, instruments and other industrial products. Test for stability influence of temperature
GOST 27403-1987 Vat dyes. Determination of freezing point, centrifuging fastness and value of hydrogen ion concentration (pH)
GOST 18986.17-1973 Reference diodes. Method of measuring of temperature coefficient of working voltage
GOST R EN 1108-2011 Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of form stability under cyclical temperature changes
GOST 17580-1982 Wooden laminated structures. Method to determinate stability of glued joints against cyclic temperature- and humidity influences
GOST 7875-1983 Refractory products. Method for detemination of thermal stability
GOST 29104.14-1991 Industrial fabrics. Method for determination of heat resistance
GOST 938.28-1977 Leather. Method of determination of hygrothermic stability
GOST 7714-1975 Coals and anthracites. Method for the determination of thermal stability
GOST 33403-2015 Testing of chemicals of environmental hazard. Screening test for thermal stability and stability in air
GOST 27711-1988 Dipping varnishes. Method for accelerated determination of thermal endurance
GOST 28097-1989 Varnished cloth. Methods for accelerated determination of thermal endurance
GOST 7875.1-1994 Refractory products. Procedure for determination of thermal shook resistance on bricks
GOST EN 1108-2012 Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of form stability under cyclical temperature changes
GOST 24445.6-1992 Phthalic anhydride for industrial use. Method for determination of colour stability
GOST 7875.2-1994 Refractory products. Procedure for determination of thermal shock resistance on samples
GOST 961-1989 Acid-resistant and thermostable acid-resistant ceramic tiles. Specifications
GOST 15088-2014 Plastics. Method for determination of Vicat softening temperature of thermoplastics
GOST 8979-1975 Artificial leather and films. Determination methods of resistance to heat and light stability
GOST 28747-1990 Insulating flexible tubes. Accelerated test method for heating resistance
GOST R 51337-1999 Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperature limit values for hot surfaces
GOST 23.221-1984 Products weak resistance assurance. Experemental evaluation of lubricants temperature stability at friction
GOST 10519-1976 Enamelled wires. Method of accelerated determination of thermal resistance
GOST 23363-2001 Texturized synthetic threads. Method for determination of crimpiness indices
GOST 23363-1990 Texturized synthetic threads. Method for determination of crimpiness indices
GOST 7875.0-1994 Refactory products. Basic requirements for procedures of thermal shock resistance determination
GOST 28746-1990 Moulding compounds and casting thermosetting resins. Accelerated test method for heating resistance

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, thermal stability temperature

GB/T 30806-2014 Thermal insulating products for building applications.Determination of dimensional stability under specified temperature and humidity comditions
GB/T 29174-2012 Thermal analysis test method for constant-temperature stability of materials
GB/T 16998-1997 Hot-melt adhesives--Determination of thermal stability
GB/T 19137-2003 Testing method for the storage stability at low temperature of pesticides
GB/T 2392-2014 Dyes.Determination of thermo stability
GB/T 2392-2006 Dyes.Determination of thermo stability
GB/T 23800-2009 Heat transfer fluids.Determination of thermal stability
GB/T 6427-1999 Test method for frequency temperature stability of piezoelectric ceramic vibrator
GB/T 31959-2015 Determination of thermal oxidative resistance of carbon fiber
GB/T 1573-2001 Determination of thermal stability of coal
GB/T 1670-1988 Plasticizers--Test method of heat-resistance
GB/T 15595-2008 Polyvinyl chloride resins.Test methods for the thermal stability.Whiteness method
GB/T 15595-1995 Test methods for the thermal stability of polyvinyl chloride resin--Whiteness method
GB/T 1670-2008 Plasticizers-test method of heat-resistance
GB/T 2392-1980 Determination of heat stability for reactive dyes
GB/T 19136-2003 Testing method for the storage stability at elevated temperature of pesticides
GB/T 1633-2000 Plastics--Thermoplastic materials--Determination of vicat softening temperature(VST)
GB/T 5541-1985 Determination of stability of dispersion at high temperature for disperse dye
GB/T 13464-1992 Thermal analysis test methods for thermal stability of materials
GB/T 13464-2008 Thermal analysis test methods for thermal stability of materials
GB/T 13475-2008 Thermal insulation.Determination of steady-state thermal transmission.Properties.Calibrated and guard hot box
GB/T 3298-1991 Standard test method for thermal shock resistance of domestic ceramic ware
GB/T 10296-2008 Thermal insulation-Determination of steady-state thermal transmission properties.Pipe insulation apparatus
GB/T 21280-2007 Test method of thermal stability for dangerous products
GB/T 10701-1989 Test methods for thermal stability of silica glass
GB/T 10701-2008 Test methods for thermal stability of silica glass
GB/T 14235.9-1993 Testing method for thermal stability of pattern materials in investment casting
GB/T 22232-2008 Test method for the thermal stability of chemicals by differential scanning calorimetry
GB/T 11833-2014 Determination of steady-state thermal transmission properties of thermal insulation.Spherical method
GB/T 10296-1988 Thermal insulation--Determination of steady-state thermal transmission properties--Pipe insulation apparatus
GB/T 11833-1989 Thermal insulation--Determination of steady-state thermal transmission properties--Spherical method
GB/T 16498-1996 Surface active agents--Test method for stability of water-in-oil emulsion--Part 2:Determination of storage stability of water-in-oil emulsion-Low to ambient temperature cycling method
GB/T 16995-1997 Determination of gel time of thermosetting powder coatings at a given temperature
GB/T 8802-2001 Thermoplastics pipes and fitting-Determination of vicat softening temperature
GB/T 3671.1-1996 Determination of application solubility and solution stability of water-soluble dyes
GB/T 10295-1988 Thermal insulation--Determination of steady-state thermal resistance and related properties--Heat flow meter apparatus
GB/T 10295-2008 Thermal insulation.Determination of steady-state thermal resistance and related properties.Heat flow meter apparatus
GB/T 7193.5-1987 Unsaturated polyester resin--Determination of heat stability at 80 Centigrade
GB/T 22635-2008 Door leaves.Determination of the behaviour under humidity variations in successive uniform climates
GB/T 10294-1988 Thermal insulation--Determination of steady-state thermal resistance and related properties--Guarded hot plate apparatus
GB/T 10294-2008 Thermal insulation.Determination of steady-state thermal resistance and related properties.Guarded hot plate apparatus

YU-JUS, thermal stability temperature

JUS N.C6.017-1985 Radio-frequency cables. Thermal stability test ofcables by exposure to extreme temperatures
JUS H.P8.515-1986 Testing of pesticides. Low temperature stability
JUS N.C6.015-1985 Radio-frequency cables. Capacitance stability test by varying the temperature ofcable
JUS N.C0.058-1980 Testing of insulated cords and cables. Thermal stability
JUS N.C6.016-1985 Radio-frequency cables. Attenuation stability test by varying the temperature of cable
JUS U.J5.530-1980 Heat in civil engineering. Characteristics of thermal stability ofbuildings

Professional Standard - Public Safety Standards, thermal stability temperature

GA/T 76-1994 Test method for thermal analysis of the constant temperature stability of substances

American Society for Testing and Materials (ASTM), thermal stability temperature

ASTM D4594-96(2009) Standard Test Method for Effects of Temperature on Stability of Geotextiles
ASTM E537-98 Standard Test Method for Assessing the Thermal Stability of Chemicals By Methods of Thermal Analysis
ASTM D6207-97(2003) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D6207-97 Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D6207-03(2007) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D6207-03 Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM C548-71(1977) Method of Test for Dimensional Stability of Low Temperature Thermal Block and Pipe Insulation
ASTM D4594-96(2003) Standard Test Method for Effects of Temperature on Stability of Geotextiles
ASTM D4594-96 Standard Test Method for Effects of Temperature on Stability of Geotextiles
ASTM D4594/D4594M-96(2015)e1 Standard Test Method for Effects of Temperature on Stability of Geotextiles
ASTM D4594/D4594M-96(2020) Standard Test Method for Effects of Temperature on Stability of Geotextiles
ASTM D6468-08 Standard Test Method for High Temperature Stability of Middle Distillate Fuels
ASTM D6207-03(2011) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D6207-03(2019) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D6207-03(2015) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D7437-08(2019) Standard Test Method for Temperature and Hard Water Stability of Engine Coolants
ASTM D4499-95(2000) Standard Test Method for Heat Stability of Hot-Melt Adhesives
ASTM D449-89(1999)e1 Standard Specification for Asphalt Used in Dampproofing and Waterproofing
ASTM E825-98(2023) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E825-98(2016) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E2550-17 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM D7437-08 Standard Test Method for Temperature and Hard Water Stability of Engine Coolants
ASTM D7437-08(2013) Standard Test Method for Temperature and Hard Water Stability of Engine Coolants
ASTM E2550-07 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2550-11 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM D6743-01 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
ASTM D6743-01e1 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
ASTM D6743-06(2011) Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
ASTM E2550-21 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM D2070-91(1996) Standard Test Method for Thermal Stability of Hydraulic Oils
ASTM D2070-16 Standard Test Method for Thermal Stability of Hydraulic Oils
ASTM D2070-16e1 Standard Test Method for Thermal Stability of Hydraulic Oils
ASTM D4499-07 Standard Test Method for Heat Stability of Hot-Melt Adhesives
ASTM D6743-11(2015) Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
ASTM D6743-20 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
ASTM D6468-99 Standard Test Method for High Temperature Stability of Distillate Fuels
ASTM D6468-99(2004) Standard Test Method for High Temperature Stability of Distillate Fuels
ASTM E487-20 Standard Test Methods for Constant-Temperature Stability of Chemical Materials
ASTM E487-14 Standard Test Method for Constant-Temperature Stability of Chemical Materials
ASTM D6468-06 Standard Test Method for High Temperature Stability of Distillate Fuels
ASTM E914-83(1993)e1 Practice for Evaluating Temperature Scale for Thermogravity
ASTM F1212-89(2002) Standard Test Method for Thermal Stability Testing of Gallium Arsenide Wafers
ASTM F1212-89(1996)e1 Standard Test Method for Thermal Stability Testing of Gallium Arsenide Wafers
ASTM D2070-91(2001) Standard Test Method for Thermal Stability of Hydraulic Oils
ASTM D2070-91(2006) Standard Test Method for Thermal Stability of Hydraulic Oils
ASTM D2070-91(2010) Standard Test Method for Thermal Stability of Hydraulic Oils
ASTM C335-95 Standard Test Method for Steady-State Heat Transfer Properties of Horizontal Pipe Insulation
ASTM D6743-11 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
ASTM D4499-07(2015) Standard Test Method for Heat Stability of Hot-Melt Adhesives
ASTM E1981-98 Standard Guide for Assessing the Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry
ASTM E1981-98(2004) Standard Guide for Assessing the Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry
ASTM E1981-98(2012)e2 Standard Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry
ASTM E1981-98(2012)e1 Standard Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry
ASTM E487-04 Standard Test Method for Constant-Temperature Stability Of Chemical Materials
ASTM E487-99 Standard Test Method for Constant-Temperature Stability Of Chemical Materials
ASTM E487-09 Standard Test Method for Constant-Temperature Stability Of Chemical Materials
ASTM F1721-96 Standard Practices for Determining Stability of Direct Thermal Imaging Products

CH-SNV, thermal stability temperature

VSM 15158-1971 Rectangular or square parallel keys and their corresponding keyways (Dimensions in millimetres)

Canadian General Standards Board （CGSB), thermal stability temperature

CGSB 1-GP-71 METH 31.3-1982 Methodes D'Essai Des Peintures Et Pigments Stabilite A Basse Temperature Stabilite A -20 Degrees C
CGSB 1-GP-71 METH 30.6-1980 Methods of Testing Paints and Pigments Accelerated Stability Heat Stability

PL-PKN, thermal stability temperature

PN BN 6091-10-1964
PN C04592-1972 Water and waste water , Determination coefficient of stability and thermostability of water
PN C89024-1993 Plastics. Thermoplastic materials. Determination of Vicat softening temperature
PN C89284-1986 Polyethylene Determination of thermooxidative stability
PN A86768-1967 Canned fish Termostat ?esting
PN M53854-08-1992 Electric thermometers Thermometric characteristics for thermocouples Thermocouple Type E (NiCr-CuNi)
PN M53854-09-1992 Electric thermometers Thermometric characteristics for thermocouples Thermocouple Type N (NiCrSi-NiSi)
PN C89291 ArkusZ13-1973 Polyyinyl chloride resins Determrnatlon of ?he thermal s?abili?y by ?he discolorclion me?hod
PN C89291-13-1988 Poly(vinyl chloride) resins Determination of the thermal stability by the cliscoloration method
PN C89291-15-1991 Poly(vinyl chloride) resins Determination of the thermal stability by the pH method
PN C04404-20-1988 Pigments for paints General methods of test Determination of heat stability
PN H04300-1987 Steel etermination of nil-dictility emperature

Professional Standard - Machinery, thermal stability temperature

JB/T 9477.3-1999 Directly heated voltage - stabilizing type negative temperature coefficient thermistors

CZ-CSN, thermal stability temperature

CSN 64 0225-1957
CSN 64 9010-1986 Aqueous dispersions of polymers nd copolymers — Determination f stability against elevated emperature
CSN 67 3150 Cast.02-1975 Stability of varnish at increased temperature
CSN 73 0565-1978 Thermo-technical properties of struetures. Stables
CSN 65 6155-1989 Jet fuels. Determination of thermal tability
CSN 25 8147-1966 Thermometers for heat endurance test
CSN 64 0521-1984 Plastics. Determination of the Vicat oftening temperature of thermo- lastics
CSN 25 8150-1966 Thermometers for determination of loss on heating
CSN 67 6009-1962 Test o? print stability on sheet metal t elevated temperatures
CSN 72 5135-1975 Determination of glaze and ceramic body stability in autoclave
CSN 50 0369-1989 Paper and board. Hoat test for nvechanical stability.

International Truck and Engine Corporation (ITEC), thermal stability temperature

INTERN CEMS BT-13-2009 Stability Heating Test
INTERN CEMS GT-10-2009 Heated Paint Stability Test

US-FCR, thermal stability temperature

FCR COE EM 1110-2-1902-2003 SLOPE STABILITY

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, thermal stability temperature

JEDEC JESD22-A101-B-1997 Steady-State Temperature Humidity Bias Life Test
JEDEC JESD90-2004 A Procedure for Measuring P-Channel MOSFET Negative Bias Temperature Instabilities
JEDEC JESD241-2015 Procedure for Wafer-Level DC Characterization of Bias Temperature Instabilities

KR-KS, thermal stability temperature

KS M 2171-2018(2023) Testing method for thermal and oxidation stability of heat treating oils
KS K ISO 23999-2021 Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat
KS M ISO 11645-2002 Leather－Heat stability of industrial－glove leather

GM Daewoo, thermal stability temperature

GMKOREA EDS-T-7604-2011 Test Method for Determining the Temperature Stability of Automotive Trim Materials
GMKOREA EDS-T-7770-2011 Determination of Heat Stability of Brake Fluids
GMKOREA EDS-T-7722-2011
GMKOREA EDS-T-7729-2011

Society of Automotive Engineers (SAE), thermal stability temperature

SAE AMS4222G-1995 Aluminum Alloy Castings, Sand, Moderate Heat Resistance, 4.0Cu - 2.0Ni - 1.5Mg - 0.12Ti (242.0P), Solution Heat Treated and Stabilized
SAE ARP1523C-2000 Air Mode Insulated Containers - Thermal Efficiency Requirements (Stabilized Type)
SAE J160-2001 Dimensional Stability of Friction Materials When Exposed to Elevated Temperatures

ES-AENOR, thermal stability temperature

Professional Standard - Petrochemical Industry, thermal stability temperature

SH/T 0680-1999 Heat transfer fluids.Determination of thermal stability
SH/T 0209-1992 Determination of thermal stability of hydraulic oil
SH/T 0644-1997 Test method for low temperature stability of aviation hydraulic oil
SH/T 0569-1993 Determination of stability of water-in-oil emulsion (low temperature-room temperature cycle method)

International Federation of Trucks and Engines, thermal stability temperature

NAVISTAR CEMS BT-13-2009 Stability Heating Test
NAVISTAR CEMS DT-11-2001 Heat Stability of Thermoplastic Trim Materials
NAVISTAR CEMS GT-10-2015 VOID - Heated Paint Stability Test

Military Standard of the People's Republic of China-General Armament Department, thermal stability temperature

GJB 2153A-2018 Specification for high stable low frequency temperature coefficient constant elastic alloys
GJB 2153-1994 Specification for high stable low frequency temperature coefficient constant elastic alloys
GJB 540.8-1988 Airborne Missile Strength and Stiffness Specification Aeroelastic Instabilities
GJB 67.7-1985 Military Aircraft Strength and Stiffness Specification Aeroelastic Instabilities

未注明发布机构, thermal stability temperature

BS EN ISO 10363:1995(1999) Hot - melt adhesives — Determination of thermal stability
IPC TR-465-1 Steam temperature control stable round-robin test

GM North America, thermal stability temperature

GM GMP.PVC.029-1991 PVC - 60 Type A Durometer, Heat Stabilized, Flexible, Injection Molding Compound
GM GMP.PP.002-1994 Polypropylene - Heat Stabilized, UV Stabilized, Impact Modified
GM GMP.TPU.028-2002 TPU - UV Stabilized, Heat Stabilized, Castable Powder
GM GMP.EEBC.017-2002 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 200 MPa Flexural Modulus, Heat Stabilized
GM GMP.PVC.030-1991 PVC - 85 Type A Durometer, Heat Stabilized, Flexible, Extrusion Molding Compound
GMP.ABS.010-1990 ABS - Medium Heat Resistant, UV Stabilized Revision A
GM GMP.PA66.009-1996 Nylon 66 - Impact Modified, Heat Stabilized
GM GMP.PA66.015-1997 Nylon 66 - High Impact Modified, Heat Stabilized
GM GM9059P-1988 Test for Thermal-Oxidative Stability Characteristics of Plastics
GM GMP.PA6.007-2002 Nylon 6 - High Impact Modified, Heat Stabilized (Revision C)
GM GMP.PA6.016-1991 Nylon 6 - Copolymer, Heat Stabilized, High Impact
GM GMP.PA66.062-1996 Nylon 66 - Very High Impact Modified, Heat Stabilized
GM GMP.PA6.026-1997 Nylon 6 - 30% Glass Fiber Reinforced, UV Stabilized, Impact Modified, Heat Stabilized, Reduced Moisture

(U.S.) Ford Automotive Standards, thermal stability temperature

FORD FLTM BI 153-01-2005 THERMAL STABILITY FOR LUBRICANTS
FORD WSS-M4D683-A2-1995 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 40 DUROMETER D HARDNESS, HEAT STABILIZED MOLDING COMPOUND
FORD SQ-M4D9002-A-2000 POLYAMIDE 11, RIGID, HEAT STABILIZED

Professional Standard - Coal, thermal stability temperature

MT/T 560-2008 Classification for thermal stability value of coal
MT/T 560-1996 Thermal Stability Classification of Coal
MT/T 924-2004 Determination of thermal stability of industrial briquette

国家安全生产监督管理总局, thermal stability temperature

MT/T 560-2007 Thermal Stability Classification of Coal

Professional Standard - Commodity Inspection, thermal stability temperature

SN/T 2902-2011 Screening experiments for thermal stability and air stability of dangerous goods
SN/T 2942-2011 Assessment of thermal oxidation stability of plastics.Differential scanning calorimetry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, thermal stability temperature

GB/T 1573-2018 Determination of thermal stability of coal

International Electrotechnical Commission (IEC), thermal stability temperature

IEC PAS 62161:2000 Steady state temperature humidity bias life test
IEC TR 62518:2009 Rare earth sintered magnets - Stability of the magnetic properties at elevated temperatures
IEC TS 62876-3-1:2022 Nanomanufacturing - Reliability assessment - Part 3-1: Graphene-based material - Stability: Temperature and humidity test
IEC 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET)
IEC 62059-32-1:2011 Electricity Metering Equipment - Dependability - Part 32-1: Durability - Testing of the stability of metrological characteristics by applying elevated temperature

RO-ASRO, thermal stability temperature

STAS 6798/1-1983 ELECTROINSULATING OILS Oxidation stability test with oxygen by heatlng
STAS 7948/13-1978 INORGANIC PIGMENTS Determination of stability and reresistance to heat
STAS 127-1968
STAS 9053-1971 TUBRO JET FUEL Determination of the thermal stability
STAS SR ISO 11645:1995 Leather — Heat stability of industrial-glove leather
STAS 10647-1976 BOARD FOR PASSENGER CARS Determination of dimensional stability to heat
STAS 11232/5-1981 Stabilized power supplies, d.c. outputTEMPERATURE EFFECT, TRANSIENT PERFORMANCE MEASUREMENT, SETTLING EFFECTS Prescription
STAS 12472-1986 PLASTICS POLYETHYLENE Method for stability determination at thermooxidative degradation
STAS 5491-1980 MINERAL OILS Heat and oxidation stability determination V.T.I. method
STAS SR ISO 815+A1:1995 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures

国家市场监督管理总局、中国国家标准化管理委员会, thermal stability temperature

GB/T 19136-2021 Testing method of the accelerated storage stability at elevated temperature for pesticides

Professional Standard - Aerospace, thermal stability temperature

QJ 967-1986 Test method for medium-temperature steady-state heat transfer characteristics of rigid non-metallic insulation materials
QJ 966-1986 Test method for low-temperature steady-state heat transfer characteristics of rigid non-metallic insulation materials

BE-NBN, thermal stability temperature

NBN-EN 434-1994 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat
NBN-ISO 815:1994 Rubber, vulcanized or thermoplastic. Determination of compression set at ambient, elevated or low temperatures

Professional Standard - Electron, thermal stability temperature

SJ 1560-1980 Negative temperature coefficient thermistors used as voltage regulators for Type MF21 and MF22
SJ 1559-1980 Generic specification for negative temperature coefficient thermistors used as voltage regulators
SJ/T 11037-1996 Test method for thermal stability of electronic glass
SJ/T 11497-2015 Test method for thermal stability testing of gallium arsenide wafers

Professional Standard - Energy, thermal stability temperature

NB/SH/T 0859-2013 Standard test method for the thermal stability of chemicals by thermal analysis
NB/SH/T 0906-2015 Determination of high temperature deposits of engine oils by hot tube test

GM Global, thermal stability temperature

GMW 16948-2013 Polyamide 6 - Heat Stabilized, Impact Modified, UV Stabilized Issue 1; English
GMW 17047-2013 Polyamide High Heat Resistant - Glass Fiber Reinforced, Heat Stabilized Issue 1; English

TR-TSE, thermal stability temperature

TS 1836-1975 DBTE?RMINATION OP THERMAL STABILffiTY OF AVIATION T?RB?NE FUEL.S
TS 1825-1975 PLASTICS DETERMINATION OF THE VICAT SOFTENING TEMPERATURE OF THERMOPLASTICS

FI-SFS, thermal stability temperature

SFS 4238 E-1979 In the event of any differences in interpretation of this standard the Finnish version shall take precedence over this translation.

Professional Standard - Agriculture, thermal stability temperature

NY/T 1427-2016 Guidelines for storage stability testing of pesticides at ambient temperature
NY/T 1427-2007 Guidelines for Testing Stability of Pesticides at Ambient Temprature
NY/T 1860.4-2016 Guidelines on the determination of physico-chemical properties of pesticides.Part 4:Thermal stability

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., thermal stability temperature

ASHRAE 3823-1994 Unsteady-State Thermal Analysis of a Large Space with Vertical Temperature Distribution
ASHRAE 3712-1993 Skin Temperature and Evaporative Heat Loss Variations for Men and Women in Thermal Comfort

ESDU - Engineering Sciences Data Unit, thermal stability temperature

ESDU 89027-1989 Steady state temperatures and thermal stresses in a spherical or cylindrical laminated shell.

PT-IPQ, thermal stability temperature

E 279-1973

工业和信息化部, thermal stability temperature

YB/T 4772-2019 Determination and calculation method of billet heating temperature uniformity
YS/T 1264-2018 Test method for thermal stability of titanium alloys

Defense Logistics Agency, thermal stability temperature

DLA MIL-PRF-123/10 D VALID NOTICE 1-2010 Capacitors, Fixed, Ceramic Dielectric, (Temperature Stable and General Purpose), High Reliability, Nonleaded, Style CKS51
DLA MIL-PRF-123/11 E VALID NOTICE 1-2010 Capacitors, Fixed, Ceramic Dielectric, (Temperature Stable and General Purpose), High Reliability, Nonleaded, Style CKS52
DLA MIL-PRF-123/21 C VALID NOTICE 1-2010 Capacitors, Fixed, Ceramic Dielectric, (Temperature Stable and General Purpose), High Reliability, Nonleaded, Style CKS55
DLA MIL-PRF-123/22 C VALID NOTICE 1-2010 Capacitors, Fixed, Ceramic Dielectric, (Temperature Stable and General Purpose), High Reliability, Nonleaded, Style CKS56
DLA MIL-PRF-123/23 B VALID NOTICE 1-2010 Capacitors, Fixed, Ceramic Dielectric, (Temperature Stable and General Purpose), High Reliability, Nonleaded, Style CKS57
DLA QPL-123-QPD-2010 Capacitors, Fixed, Ceramic Dielectric, (Temperature Stable and General Purpose), High Reliability, General Specification for
DLA QPL-123-2012 Capacitors, Fixed, Ceramic Dielectric, (Temperature Stable and General Purpose), High Reliability, General Specification for
DLA QPL-123-2013 Capacitors, Fixed, Ceramic Dielectric, (Temperature Stable and General Purpose), High Reliability, General Specification for
DLA QPL-123-39-2006 CAPACITORS, FIXED, CERAMIC DIELECTRIC (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, GENERAL SPECIFICATION FOR
DLA MIL-PRF-123/12 D VALID NOTICE 1-2010 Capacitors, Fixed, Ceramic Dielectric, (Temperature Stable and General Purpose), High Reliability, Nonleaded, Style CKS53
DLA MIL-DTL-28827 B-2004 SWITCHES THERMOSTATIC, (VOLATILE LIQUID), HERMETICALLY SEALED, GENERAL SPECIFICATION FOR
DLA MIL-S-19500/335 VALID NOTICE 4-2011 Semiconductor Device, Silicon, Voltage Reference (Temperature- Stable) Type 1N430A, 1N430B

AT-ON, thermal stability temperature

ONORM B 3646 Teil.5-1986 Roll roofings and prefabricated Sheets for waterproofing made of bitumen or modified bitumen;testing;stability at high temperatures (high temperature flowing)and thermic ageing
OENORM EN 13763-2-2021 Explosives for civil uses - Detonators and detonating cord relays - Part 2: Verification of thermal stability at high temperatures
ONORM EN ISO 8497:1996 Thermal insulation-Determination of steady-state thermal transmission properties of thermal insulation for circular pipes

General Motors do Brasil, thermal stability temperature

GMSA LTP. EM.127-2011 Test method for determining temperature stability of trim materials Determina莽茫o da estabilidade dimensional de materiais de acabamento Do Not use on New Programs; No Replacement

National Metrological Technical Specifications of the People's Republic of China, thermal stability temperature

JJF(石化) 030-2020 Calibration Specification for Thermal Stability Test at 75 ℃ Device
JJF(石化)030-2020 Calibration Specification for Thermal Stability Test at 75 ℃ Device

CU-NC, thermal stability temperature

NC 33-88-1988 Oil Industry. Soluble Oil. Determination of Thermal Stability

GOSTR, thermal stability temperature

GOST 7875.1-2018 Refractory products. Method for determination of thermal shock resistance on bricks
GOST R 8.980-2019 State system for ensuring the uniformity of measurements. Standard reference data. The critical temperatures and critical pressures of thermo unstable substances
GOST 7875.2-2018 Refractory products. Method for determination of thermal shock resistance on samples
GOST 7875.0-2018 Refractory products. Basic requirements for methods of thermal shock resistance determination

Hebei Provincial Standard of the People's Republic of China, thermal stability temperature

DB13/T 81.7-1991 Determination method of thermal stability of fireworks and firecrackers

国家质量监督检验检疫总局, thermal stability temperature

SN/T 3078.2-2015 Determination of thermal stability of chemicals Part 2: Thermogravimetric analysis

Indonesia Standards, thermal stability temperature

SNI ISO 306:2011 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

ES-UNE, thermal stability temperature

UNE-EN ISO 306:2023 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
UNE-EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) (IEC 62373:2006). (Endorsed by AENOR in November of 2006.)

IN-BIS, thermal stability temperature

NATO - North Atlantic Treaty Organization, thermal stability temperature

STANAG 4527-2000 Explosive@ Chemical Stability@ Nitrocellulose Based Propellants@ Procedures for Assessment of Chemical Life and Temperature Dependence of Stabiliser Consumption Rates (ED 1; To obtain please contact your national Defense Standardization Office or the NATO

Professional Standard - Light Industry, thermal stability temperature

QB/T 3567-1999 Method for determination of thermal stability of casserole for ceramic cooker

Group Standards of the People's Republic of China, thermal stability temperature

T/CI 102-2023 Determination of thermal stability of rare earth ceramic phosphors for laser-based lighting

SAE - SAE International, thermal stability temperature

SAE J160-1970 Swell@ Growth@ and Dimensional Stability of Brake Linings

American National Standards Institute （ANSI), thermal stability temperature

ASTM D2070-23 Standard Test Method for Thermal Stability of Hydraulic Oils

National Metrological Verification Regulations of the People's Republic of China, thermal stability temperature

JJG 855-1994 Verification Regulation of Digital Calorimetric Thermometer

NEMA - National Electrical Manufacturers Association, thermal stability temperature

NEMA LI 5-1969 TEMPERATURE INDICES INDUSTRIAL THERMOSETTING LAMINATES

VN-TCVN, thermal stability temperature

TCVN 7615-2007 Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings

European Committee for Electrotechnical Standardization（CENELEC）, thermal stability temperature

EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET)