ZH
RU
ES
Exhaust gas detection system
Exhaust gas detection system, Total:105 items.
In the international standard classification, Exhaust gas detection system involves: Air quality, Vocabularies, Protection against fire, Environmental protection, Power stations in general, Applications of information technology, Wastes, Construction industry, Internal combustion engines for road vehicles, Rubber and plastics products, Fluid power systems, Internal combustion engines, Elements of buildings, Kitchen equipment, Measurement of time, velocity, acceleration, angular velocity, Installations in buildings, Environmental testing, Electrical engineering in general, Domestic, commercial and industrial heating appliances, Safety of machinery, Road vehicle systems, Metrology and measurement in general.
Group Standards of the People's Republic of China, Exhaust gas detection system
- T/ZZB 1096-2019 Continuous emission monitoring system
- T/ZAEPI 005-2023 Technical specification for continuous emission monitoring system of flue gas from thermal power units
- T/QGCML 335-2022 Zero Energy Cabin Carbon Emission Detection System
- T/CAEPI 13-2018 Technical Guidelines for Monitoring System of Flue Gas Emission Process (Working Condition) in Thermal Power Plants
- T/NJSS 002-2023 Technical specification for off-site operation & maintenance of continuous emissions monitoring system of fixed source flue gas on-line monitoring system
- T/ZS 0220-2021 Technical specification for on-line monitoring system for cooking fume emission（trail implementation）
- T/AHEMA 25-2022 Technical specification for operation and maintenance of online monitoring system for cooking fume emission
- T/QGCML 164-2021 General technical requirements for on-line monitoring system of cooking oil fume emission
- T/CECS 1001-2022 Performance test and evaluation standard for kitchen exhaust gas system
- T/HZAEPI 002-2023 Technical specification for operation and maintenance of online monitoring system （light scattering method）for cooking fume emission
- T/CAEPI 25-2020 Technical guide for installation and acceptance of emission process monitoring system from stationary sources
- T/QGCML 1768-2023 Technical Specifications for Operation and Maintenance of Stationary Pollution Source Flue Gas Online Monitoring Systems for Non-key Pollution Source Emitting Enterprises
- T/CECS 771-2020 Testing standard for exhaust duct system ventilation performance of residential kitchen and bathroom
- T/ZS 0362-2022 pecification for field testing of ventilation performance of domestic kitchen and bathroom exhaust systems
- T/CMA JD007-2020 Synthetical Testing System for Chassis Dynamometers for Automobile Emissions Testing
- T/CICEIA /CAMS43-2022 Space-Ground-Vehicle-People integration(SGVP)- Mobile source emission monitoring system- Ground detection and monitoring system data sharing and technical specifications
Association Francaise de Normalisation, Exhaust gas detection system
- NF EN 12101-7:2011 Systèmes pour le contrôle des fumées et de la chaleur - Partie 7 : tronçons de conduit de désenfumage
- XP X43-420:2011 Émissions de sources fixes - Assurance qualité des PEMS (Système prédictif de suivi des émissions atmosphériques)
- NF ISO 10396:2007 Émissions de sources fixes - Échantillonnage pour la détermination automatisée des concentrations d'émission de gaz pour des systèmes fixes de surveillance
- NF X43-553*NF ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems.
- NF E37-211-1*NF ISO 8178-1:2020 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement systems of gaseous and particulate emissions
- NF ISO 16247:2006 Véhicules routiers - Détection des fuites du dispositif d'échappement - Méthode d'essai à l'hélium et spécification du dispositif de détection
- NF X43-309*NF EN 14884:2006 Air quality - Stationary source emissions - Determination of total mercury : automated measuring systems.
- NF R10-022*NF ISO 16247:2006 Road vehicles - Detection of exhaust systems leaks - Helium test method and detection device specification
US-FCR, Exhaust gas detection system
Professional Standard - Environmental Protection, Exhaust gas detection system
- HJ/T 76-2001 Specifications and test procedures for continuous emission monitoring systems of flue gas emitted from stationary sources
- HJ/T 76-2007 Specifications and test procedures for continuous emission monitoring systems of flue gas emitted from stationary sources (on trial)
- HJ 76-2017 Technical requirements and detection methods of continuous monitoring system for flue gas (SO2, NOx, particulate matter) emissions from stationary pollution sources
International Organization for Standardization (ISO), Exhaust gas detection system
- ISO 3182:2022 Light measuring system for smoke emission testing
- ISO 17179:2016 Stationary source emissions - Determination of the mass concentration of ammonia in flue gas - Performance characteristics of automated measuring systems
- ISO 10849:2022 Stationary source emissions — Determination of the mass concentration of nitrogen oxides in flue gas — Performance characteristics of automated measuring systems
- ISO/FDIS 7935:2011 Stationary source emissions - Determination of the mass concentration of sulfur dioxide in flue gases - Performance characteristics of automated measuring systems
- ISO/PRF 7935:2023 Stationary source emissions - Determination of the mass concentration of sulfur dioxide in flue gases - Performance characteristics of automated measuring systems
- ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
- ISO 8178-1:2020 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions
- ISO/DIS 7935 Stationary source emissions - Determination of the mass concentration of sulfur dioxide in flue gases - Performance characteristics of automated measuring systems
- ISO 16183:2002 Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
- ISO 14385-1:2014 Stationary source emissions - Greenhouse gases - Part 1: Calibration of automated measuring systems
- ISO 29042-4:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system
- ISO 16247:2004 Road vehicles - Detection of exhaust system leaks - Helium test method and detection device specification
British Standards Institution (BSI), Exhaust gas detection system
- BS ISO 3182:2022 Light measuring system for smoke emission testing
- 21/30408832 DC BS ISO 3182. Light Measuring System for Smoke Emission Testing
- BS ISO 17179:2016 Stationary source emissions. Determination of the mass concentration of ammonia in flue gas. Performance characteristics of automated measuring systems
- BS ISO 8178-1:2020 Reciprocating internal combustion engines. Exhaust emission measurement - Test-bed measurement systems of gaseous and particulate emissions
- BS ISO 10849:2022 Stationary source emissions. Determination of the mass concentration of nitrogen oxides in flue gas. Performance characteristics of automated measuring systems
- BS ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
- BS ISO 16183:2003 Heavy duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
- BS ISO 16247:2004 Road vehicles. Detection of exhaust systems leaks. Helium test method and detection device specification
- 23/30442765 DC BS ISO 7935. Stationary source emissions. Determination of the mass concentration of sulfur dioxide in flue gases. Performance characteristics of automated measuring systems
- 21/30409886 DC BS ISO 10849. Stationary source emissions. Determination of the mass concentration of nitrogen oxides in flue gas. Performance characteristics of automated measuring systems
- BS ISO 14385-1:2014 Stationary source emissions. Greenhouse gases. Calibration of automated measuring systems
- BS ISO 12039:2019 Stationary source emissions. Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas. Performance characteristics of automated measuring systems
- 19/30387314 DC BS ISO 8178-1 AMD1. Reciprocating internal combustion engines. Exhaust emission measurement. Part 1. Test-bed measurement systems of gaseous and particulate emissions
- BS EN 14884:2005 Air quality - Stationary source emissions - Determination of total mercury: automated measuring systems
- BS EN 14884:2005(2010) Air quality - Stationary source emissions - Determination of total mercury: automated measuring systems
- BS ISO 16183:2002 Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
- BS ISO 14385-2:2014 Stationary source emissions. Greenhouse gases. Ongoing quality control of automated measuring systems
- BS ISO 16247:2006 Road vehicles - Detection of exhaust systems leaks - Helium test method and detection device specification
National Metrological Technical Specifications of the People's Republic of China, Exhaust gas detection system
- JJF 1585-2016 Calibration Specification for Continuous Emission Monitoring Systems of Flue Gas Emitted from Stationary Source
- JJF(机械) 1003-2018 Calibration specification for light vehicle emission detection system
- JJF(机械)1003-2018 Calibration specification for light vehicle emission detection system
- JJF 1227-2009 Calibration Spectification for Exhaust Pollutants from Gasoline Vehicle under Steady-state Loaded Mode Measurement System
HU-MSZT, Exhaust gas detection system
Professional Standard - Electricity, Exhaust gas detection system
- DL/T 960-2005 Order specifications for continuous emissions monitoring systems of flue gas emitted from coal-fired power plants
U.S. Military Regulations and Norms, Exhaust gas detection system
Society of Automotive Engineers (SAE), Exhaust gas detection system
- SAE J1094-2011 Constant Volume Sampler System for Exhaust Emissions measurement
- SAE J1094A-1978 CONSTANT VOLUME SAMPLER SYSTEM FOR EXHAUST EMISSIONS MEASUREMENT
- SAE J1094-1992 Constant Volume Sampler System for Exhaust Emissions Measurement, Information Report June 1992
- SAE J2763-2008 Test Procedure for Determining Refrigerant Emissions from Mobile Air Conditioning Systems
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Exhaust gas detection system
- GB/T 36208-2018 Anticorrosion lining technical requirements and procedure evaluation for industrial exhaust gas systems
- GB/T 8190.1-2023 Emission measurement of reciprocating internal combustion engines - Part 1: Test bench measurement systems for gaseous and particulate emissions
- GB/T 25749.4-2010 Safety of machinery.Evaluation of the emission of airborne hazardous substances.Part 4:Tracer method for the measurement of the capture efficiency of an exhaust system
Shanxi Provincial Standard of the People's Republic of China, Exhaust gas detection system
- DB14/T 2051-2020 Technical Specifications for Quality Control of Operation and Maintenance of Continuous Monitoring System for Flue Gas Emission from Stationary Pollution Sources
Korean Agency for Technology and Standards (KATS), Exhaust gas detection system
- KS I ISO 10396-2009(2019) Stationary source emissions－Sampling for the automated determination of gas emission concentrations forpermanently-installed monitoring systems
- KS I ISO 10396:2009 Stationary source emissions-Sampling for the automated determination of gas emission concentrations forpermanently-installed monitoring systems
- KS R ISO 16183:2009 Heavy duty engines-Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
- KS R ISO 16183-2009(2019) Heavy duty engines－Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
- KS R ISO 16247-2006(2016) Road vehicles－Detection of exhaust system leaks－Helium test method and detection device specification
- KS R ISO 16247-2006(2021) Road vehicles－Detection of exhaust system leaks－Helium test method and detection device specification
- KS R ISO 16247:2006 Road vehicles－Detection of exhaust system leaks－Helium test method and detection device specification
Japanese Industrial Standards Committee (JISC), Exhaust gas detection system
- JIS B 8008-1:2023 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement systems of gaseous and particulate emissions
VN-TCVN, Exhaust gas detection system
- TCVN 6192-2010 Stationary source emmissions.Sampling for the automated determination of gas emission concentrations for permanently.installed monitoring systems
RU-GOST R, Exhaust gas detection system
- GOST R ISO 10396-2012 Stationary source emissions. Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
- GOST R ISO 16183-2013 Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
- GOST R 8.917-2015 State system for ensuring the uniformity of measurements. Instruments for measuring the smoke of exhaust gases from the motor vehicles equipped with compression-ignition engines. Verification method
- GOST 8.615-2013 State system for ensuring the traceability of measurements. Instruments for measuring vehicle exhaust emissions. Verification procedure
AENOR, Exhaust gas detection system
- UNE-ISO 10396:2009 Stationary source emissions. Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
- UNE-EN 14884:2006 Air quality - Stationary source emissions - Determination of total mercury: Automated measuring systems
European Committee for Standardization (CEN), Exhaust gas detection system
- EN 13526:2001 Stationary Source Emissions - Determination of the Mass Concentration of Total Gaseous Organic Carbon in Flue Gases From Solvent Using Processes - Continuous Flame Ionisation Detector Method
- EN 14884:2005 Air quality - Stationary source emissions - Determination of total mercury: automated measuring systems
Danish Standards Foundation, Exhaust gas detection system
- DS/ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
- DS/EN 14884:2006 Air quality - Stationary source emissions - Determination of total mercury - Automated Measuring Systems
Lithuanian Standards Office , Exhaust gas detection system
- LST EN 12619-2000 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous flame ionisation detector method
- LST EN 14884-2006 Air quality - Stationary source emissions - Determination of total mercury: automated measuring systems
- LST EN 13526-2002 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method
- LST ISO 16183:2006 Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions (identical ISO 16183:2002)
未注明发布机构, Exhaust gas detection system
- BS ISO 16183:2002(2003) Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
Standard Association of Australia （SAA）, Exhaust gas detection system
- AS 2428.5:2004 Methods of testing smoke/heat release vents - Determination of discharge coefficient and effective aerodynamic area
International Electrotechnical Commission (IEC), Exhaust gas detection system
- IEC TR 62725:2013 Analysis of quantification methodologies for greenhouse gas emissions for electrical and electronic products and systems
AT-ON, Exhaust gas detection system
- ONORM M 7532-2001 Testing of flue gases of oil burning systems - Method by fluid means for detection of oil derivatives
German Institute for Standardization, Exhaust gas detection system
- DIN 51402-2:2020-09 Determination of flue gases of oil burning systems - Method by fluid means for detection of oil derivatives
- DIN EN 14884:2006 Air quality - Stationary source emissions - Determination of total mercury: Automated measuring systems; English version of DIN EN 14884:2006-03
SAE - SAE International, Exhaust gas detection system
- SAE J2763-2015 Test Procedure for Determining Refrigerant Emissions from Mobile Air Conditioning Systems
PH-BPS, Exhaust gas detection system
- PNS ISO 29042-4:2021 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system