ZH
RU
ES

The relationship between measurement and control

The relationship between measurement and control, Total:500 items.

In the international standard classification, The relationship between measurement and control involves: Farming and forestry, Electronic tubes, Industrial automation systems, Microprocessor systems, Applications of information technology, Telecommunication systems, Nuclear energy engineering, Geology. Meteorology. Hydrology, Air quality, Vocabularies, Road vehicle systems, Ergonomics, Electrical engineering in general, Safety of machinery, Electronic components in general, Diagnostic, maintenance and test equipment, Horology, Quality, Analytical chemistry, Products of the chemical industry, Space systems and operations, Petroleum, petroleum products and natural gas handling equipment, Metrology and measurement in general, Switchgear and controlgear, Electric traction equipment, Electrical accessories, Telecontrol. Telemetering, Equipment for petroleum and natural gas industries, Electricity. Magnetism. Electrical and magnetic measurements, Occupational safety. Industrial hygiene, Electrical and electronic testing, Interface and interconnection equipment, Installations in buildings, Languages used in information technology, Chipless working equipment, Software development and system documentation, Earthworks. Excavations. Foundation construction. Underground works, Electromagnetic compatibility (EMC), Acoustics and acoustic measurements, Medical equipment, Character sets and information coding, Fluid power systems, Thermodynamics and temperature measurements, Radiocommunications, Internal combustion engines for road vehicles, Networking, Physics. Chemistry, Fibre optic communications, Soil quality. Pedology, FOOD TECHNOLOGY, Petroleum products in general, Rubber and plastics products, Document imaging applications, Audio, video and audiovisual engineering, Domestic, commercial and industrial heating appliances, Radiation measurements, Microbiology, Electromechanical components for electronic and telecommunications equipment, Buildings, Sterilization and disinfection, Optoelectronics. Laser equipment.

German Institute for Standardization, The relationship between measurement and control

DIN 43719:1990-04 Measurement and control; mechanical grid system for the installation of measuring and control instruments
DIN 43751-1:1987-05 Measurement and control; digital measuring instruments; general specifications relating to definitions, tests and data sheet details
DIN 43718:1987-05 Measurement and control; front-frames and frontpanels of measurement and control equipment; principal dimensions
DIN 19242-1:1987-01 Measurement and control; performance tests on process computer systems; time measurement; test procedures
DIN 19242-2:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: multiplication
DIN 43903:1987 Elektrical switchgear and controlgear; humidity of compressed air; physical relationships, methods of measuring
DIN 16230:1983-11 Measurement and control; charts for strip chart recorder
DIN 19242 Beiblatt 1:1987-01 Measurement and control; performance tests on process computer systeme; time measurement; list of the published standards
DIN 19242-5:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: matrix inversion
DIN 19242-4:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: sine calculation
DIN 19242-3:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: conditional branch
DIN 19242-6:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: detection of a bit pattern
DIN 43834:1982 Measurement and control; fastening for measuring and control instruments for panel mounting; fastening component; fastening holes in the instrument
DIN 43834:1982-11 Measurement and control; fastening for measuring and control instruments for panel mounting; fastening component; fastening holes in the instrument
DIN 19242-10:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: dialogue response at the terminal
DIN 19242-9:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: digital input and output
DIN 43700:1982 Measurement and control; measurement and control instruments for panel mounting; nominal front- and cut-out-dimensions
DIN IEC/TR 63074:2021 Safety of machinery - Security aspects related to functional safety of safety-related control systems (IEC TR 63074:2019)
DIN 19242-7:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: interrupt handling with program start
DIN V 19248:1999 Control technology - Testing for process measurement and control equipment on strength to ensure pressure safety of parts
DIN 19242-8:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: I/O operation on a peripherical storage system (random access)
DIN 43751-2:1987-05 Measurement and control; digital measuring instruments; instruments for measuring analogue quantities; definitions, tests and data sheet details
DIN 19242-11:1987-01 Measurement and control; performance tests on process computer systems; time measurement; funktion tested: message oriented synchronisation between two tasks
DIN 43751-3:1987-05 Measurement and control; digital measuring instruments; instruments for measuring digital quantities; definitions, tests and data sheet details
DIN 19242-14:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: generation of a executable code and program start
DIN 43751-4:1990-06 Measurement and control; digital measuring instruments; instruments for measuring time reference quantities; definitions, tests and data sheet details / Note: Applies in conjunction with DIN 43751-1 (1987-05).
DIN EN ISO 15007-1:2003 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters (ISO 15007-1:2002); German version EN ISO 15007-1:2002
DIN EN 61069-8:2000 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of non-task-related system properties (IEC 61069-8:1999); German version EN 61069-8:1999
DIN EN 62054-21:2005 Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches (IEC 62054-21:2004); German version EN 62054-21:2004
DIN 43769:1986-03 Measurement and control; electrical temperature sensors; thermometers not fitted with protecting tubes / Note: To be replaced by DIN 43735-3 (2005-04).
DIN 19242-12:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested; record-, oriented reading from and writing to a file (random access)
DIN 19242-13:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: data transmission with error free transmission circuit
DIN 45635-12:1978 Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Electrical switchgear and control gear
DIN 45635-12:1978-03 Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Electrical switchgear and control gear
DIN EN 50123-7-1:2003 Railway applications - Fixed installations; D.C. switchgear - Part 7-1: Measurement, control and protection devices for specific use in d.c. tractions systems; Applications guide; German version EN 50123-7-1:2003
DIN IEC/TS 62607-3-2:2018-09*DIN SPEC 42607-3-2:2018-09 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC/TS 62607-3-2:2017)
DIN 43751-1:1987 Measurement and control; digital measuring instruments; general specifications relating to definitions, tests and data sheet details
DIN 6855-1:1992 Quality control of nuclear medicine instruments; radiation counting systems for measurements in vivo and in vitro
DIN 19242-1:1987 Measurement and control; performance tests on process computer systems; time measurement; test procedures
DIN 19242-2:1987 Measurement and control; performance tests on process computer systems; time measurement; function tested: multiplication
DIN 43807:1983-10 Measuring and control; electrical measuring instruments; terminal markings for switchboard meters, panel meters and measuring transducers for the measurement of power and power factor
DIN 19242 Bb.1:1987 Measurement and control; performance tests on process computer systeme; time measurement; list of the published standards
DIN 19242-3:1987 Measurement and control; performance tests on process computer systems; time measurement; function tested: conditional branch
DIN 19242-4:1987 Measurement and control; performance tests on process computer systems; time measurement; function tested: sine calculation
DIN EN 50123-7-3:1999 Railway applications - Fixed installations; D.C. switchgear - Part 7: Measurement, control and protection devices for specific use in d.c. traction systems; Section 3: Isolating voltage transducers and other voltage measuring devices; German version EN 50
DIN EN 50123-7-2:1999 Railway applications - Fixed installations; D.C. switchgear - Part 7: Measurement, control and protection devices for specific use in d.c. traction systems; Section 2: Isolating current transducers and other current measuring devices; German version EN 50
DIN 43766:1986-03 Measurement and control; electrical temperature sensors; threaded-stem thermometers with G 1 mounting thread / Note: To be replaced by DIN 43735-3 (2005-04).
DIN 19242-6:1987 Measurement and control; performance tests on process computer systems; time measurement; function tested: detection of a bit pattern
DIN 43765:1986-03 Measurement and control; electrical temperature sensors; threaded-stem thermometers with G 1/2 mounting thread / Note: To be replaced by DIN 43735-3 (2005-04).
DIN EN 61326-3-1:2008 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applic
DIN 19242-10:1987 Measurement and control; performance tests on process computer systems; time measurement; function tested: dialogue response at the terminal
DIN 19242-9:1987 Measurement and control; performance tests on process computer systems; time measurement; function tested: digital input and output
DIN 19242-5:1987 Measurement and control; performance tests on process computer systems; time measurement; function tested: matrix inversion
DIN 44836:1985 Tests on instrumentation and control systems important to safety in nuclear power stations
DIN 43764:1986-03 Measurement and control; electrical temperature sensors; straight thermometers with interchangeable sensor units / Note: To be replaced by DIN 43735-3 (2005-04).
DIN EN 61499 Bb.1:2007 Function blocks for industrial-process measurement and control systems - Supplement 1: Tutorial information - (IEC/TR 61499-3:2004)
DIN 19242-7:1987 Measurement and control; performance tests on process computer systems; time measurement; function tested: interrupt handling with program start
DIN IEC 60487-2-4:1988-08 Methods of measurement for equipment used in terrestrial radio-relay systems; measurements for sub-systems; frequency modulators; identical with IEC 60487-2-4, edition 1984

国家林业和草原局, The relationship between measurement and control

LY/T 3127-2019 Forestry application system quality control and testing

RU-GOST R, The relationship between measurement and control

GOST R 51050-1997 Deflection yoke systems. Methods of measurement and control of parameters
GOST R 59506-2021 Safety of machinery. Security aspects related to functional safety of safety-related control systems
GOST R 8.703-2010 State system for ensuring the uniformity of measurements. Nuclear material control and accounting. Measurement system. Main principles
GOST R 55754-2013 Complex quality control system. Electronic components. System of relationship between manufacturers and customers
GOST IEC 61038-2011 Electricity metering. Tariff and load control. Particular requirements for time switches
GOST R 55237.2-2016 Ergonomic of vehicles. Measurement of driver visual behaviour with respect to transport information and control systems Part 2. Equipment and procedures
GOST R 55237.2-2012 Ergonomic of vehicles. Measurement of driver visual behaviour with respect to transport information and control systems. Part 2. Equipment and procedures
GOST R ISO 15007-1-2012 Ergonomic of vehicles. Measurement of driver visual behaviour with respect to transport information and control systems. Part 1. Definitions and parameters
GOST R 51321.3-2009 Low-voltage switchgear and controlgear assemblies. Part 3. Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use and test methods
GOST R 51321.3-1999 Low-voltage switchgear and controlgear assemblies. Part 3. Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use. Distribution boards
GOST 21106.5-1977 Oscillator, modulator and regulation tubes; anode dissipated power more than 25 W. Methods of measurement of filament current and voltage
GOST R 51324.2.2-1999 Switches for household and similar fixed electrical installations. Part 2-2. Particular requirements for remonte-control switches (RCS) and test methods
GOST R IEC 61010-2-032-1999 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for hand-held current clamps for electrical measurement and test
GOST R IEC 62061-2013 Safety of machinery. Functional safety of safety-related electrical, electronic and programmable electronic control systems
GOST R IEC 62061-2015 Safety of machinery. Functional safety of safety-related electrical, electronic and programmable electronic control systems
GOST R IEC 61069-8-2012 Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Part 8. Assessment of non-task-related system properties
GOST 21106.7-1977 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Method of measurement of cathode current
GOST R IEC 61010-031-2005 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 031. Safety requirements for hand-held probe assemblies for electrical measurement and test
GOST R 51814.6-2005 Management quality systems for automotive industry. Advanced product management in quality planning and control plan
GOST R 8.839-2013 State system for ensuring the uniformity of measurements. General requirements for software controlled measuring instruments
GOST 21106.8-1977 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Methods of measurements of cathode emission
GOST R 8.609-2004 State system for ensuring the uniformity of measurements. Certified reference materials of state accounting and control of nuclear materials system. Basic principles
GOST 21106.13-1978 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Methods of measurement of direct interelectrode capacitances
GOST R 8.622-2006 State system for ensuring the uniformity of measurements. The quality performances of electric energy. Procedures of measurements during the control of electric energy in the public electrical systems
GOST 21106.11-1977 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Methods of measurements of thermionic control grid current
GOST 21106.0-1975 Oscillator, modulator and regulation tubes anode dissipated power more than 25 W. Method of measurements of electrical parameters. General principles
GOST R IEC 61513-2011 Nuclear power plants. Instrumentation and control important to safety. General requirements for systems
GOST IEC 61326-3-1-2015 Electrical equipment for measurement, control and laboratory use. EMC requirements. Part 3-1. Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety). General industrial applicati
GOST 21106.14-1978 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Methods of cut-off voltage (bias), trans. Conductance and amplification factor measurements
GOST R 8.594-2002 State system for ensuring the uniformity of measurements. The metrological ensuring of radiation control. General principles
GOST 8.638-2013 State system for ensuring the uniformity of measurements. Metrological ensuring of radiation control. General principles
GOST R 8.878-2014 State system for ensuring the uniformity of measurements. Nuclear material control and accounting. System of measurements. Estimation of uncertainty in the sampling
GOST IEC 61326-3-2-2015 Electrical equipment for measurement, control and laboratory use. EMC requirements. Part 3-2. Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety). Industrial applications with
GOST 21106.9-1977 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Method of measurements of pulse anode and grids currents
GOST R 51350-1999 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements
GOST R 52319-2005 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements
GOST R 8.589-2001 State system for ensuring the uniformity of measurements. Control of nature environment soiling. Metrological ensuring. General principles
GOST R 8.580-2001 State system for ensuring the uniformity of measurements. Determination and application of precision data in relation to petroleum products tests methods
GOST 21106.10-1977 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Methods of measurements of reverse control grid and anode currents
GOST R ISO 15007-1-2016 Ergonomics of vehicles. Assessment of driver visual behavior with respect to information and control systems. Part 1. Definitions and indicators
GOST R IEC 1066-1993 Thermoluminescene dosimetry systems for personal and environmental monitoring. General technical requirements and test methods
GOST R IEC 61069-1-2012 Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Part 1. General considerations and methodology
GOST 24789-1981 In-core instrumentation system detector assemblies of nyclear power vessel-encapsylated pressurized water reactors. General technical requirements
GOST R 12.1.031-2010 Occupational safety standards system. Lasers. Methods of dosimetrical control of laser radiation
GOST 21106.12-1977 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Method of measurement of leakage currents between electrodes and between cathode and heater

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The relationship between measurement and control

GB/T 20171-2006 EPA system architecture and communication specification for use in industrial control and measurement systems
GB/T 18272.8-2006 Industrial-process measurement and control.Evaluation of system properties for the purpose of system assessment.Part 8: Assessment of non-task-related system properties
GB/T 27408-2010 Quality control in laboratories.Evaluating validity of non-standard test method.Practice for a linear relationship
GB/T 26796.3-2011 EPA Specification for use in industrial measurement and control systems.Part 3: Interoperation test specification
GB/T 26796.2-2011 EPA Specifications for Industrial Measurement and Control Systems Part 2: Protocol Conformance Test Specifications
GB/T 26796.4-2011 EPS Specification for use in industrial measurement and control system.Part 4: Function block technical specification
GB/T 17287-1998 Liquid hydrocarbons--Dynamic measurement--Statistical control of volumetric metering systems
GB/T 17215.101-2010 Electricity metering.Data exchange for meter reading, tariff and load control.Glossary of terms.Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM
GB/T 26498-2011 Industrial automation systems and integration.Physical device control.Dimensional Measuring Interface Standard(DMIS)
GB/T 27407-2010 Quality control in laboratories.Applying statistical quality assurance and control charting techniques to evaluate analytical measurement system performance
GB/T 25931-2010 Precision clock synchronization protocol for networked measurement and control systems
GB/T 17215.421-2008 AC measurements - Tariff and load control - Part 21: Particular requirements for time switches

Association Francaise de Normalisation, The relationship between measurement and control

FD X10-045:2022 Relations entre mesures sensorielles et mesures instrumentales
FD X43-130:2004 Émissions de sources fixes - Guide pratique pour l'estimation de l'incertitude de mesurage associée aux systèmes de mesurage automatiques des gaz - Contrôle qualité QAL 1 (cas des constituants gazeux)
NF C46-080-1:2004 Digital data communications for measurement and control - Part 1 : profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems.
NF EN 61326-3-1:2017 Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 3-1 : exigences d'immunité pour les systèmes relatifs à la sécurité et pour les matériels destinés à réaliser des fonctions relatives à l...
NF EN IEC 61326-3-2:2018 Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM Partie 3-2 : exigences d'immunité pour les systèmes relatifs à la sécurité et pour les matériels destinés à réaliser des fonctions relatives à la ...
NF EN 61512-2:2003 Contrôle-commande des processus de fabrication par lots (batch) - Partie 2 : structures de données et règles générales relatives aux langages
NF C46-022:1986 ELECTROMAGNETIC COMPATIBILITY MAINLY FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL EQUIPMENT. RADIATED ELECTROMAGNETIC FIELD REQUIREMENTS.
L06-450:1994 Aerospace series. Heat treatment installations. Requirements relating to pyrometry.
NF C46-640-5:1995 Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Part 5 : assessment of system dependability.
NF C46-640-3:1996 Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Part 3 : assessment of system functionality.
NF EN ISO 11137-3:2017 Stérilisation des produits de santé - Irradiation - Partie 3 : directives relatives aux aspects dosimétriques de développement, la validation et le contrôle de routine
NF C46-303:1986 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL. METHODS OF EVALUATING THE PERFORMANCE OF TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS.
NF M08-012*NF ISO 4124:1997 Liquid hydrocarbons. Dynamic measurement. Statistical control of volumetric metering systems.
NF C46-640-4:1998 Industrial process measurement and control. Evaluation of system properties for the purpose of system assessment. Part 4 : assessment of system performance.
FD TBR 6:1997 Hydrocarbures liquides - Mesurage dynamique - Contrôle statistique des systèmes de mesurage volumétrique.
NF ISO 4124:1997 Hydrocarbures liquides - Mesurage dynamique - Contrôle statistique des systèmes de mesurage volumétrique.
NF EN 61334-4-1:1997 Hydrocarbures liquides - Mesurage dynamique - Contrôle statistique des systèmes de mesurage volumétrique.
NF EN 61334-4-42:1997 Hydrocarbures liquides - Mesurage dynamique - Contrôle statistique des systèmes de mesurage volumétrique.
NF C46-640-8:1999 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 8 : assessment of non-task-related system properties.
NF F41-020-7-1*NF EN 50123-7-1:2004 Railway applications - Fixed installations - D.C. switchgear - Part 7-1 : measurement, control and protection devices for specific use in d.c. traction systems - Application guide
NF C46-640:1993 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 1 : general considerations and methodology.
NF R14-707-1:2003 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1 : definitions and parameters.
NF R14-707-1*NF EN ISO 15007-1:2015 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1 : definitions and parameters
NF EN 60512-5-2:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 5-2 : essais de courant limite - Essai 5b : taux de réduction de l'intensité en fonction de la température
NF EN 61158-6:2004 Communications numériques pour les systèmes de mesure et de commande - Bus de terrain utilisés dans les systèmes de commande industriels - Partie 6 : spécification du protocole de la couche d'application
NF C46-020:1986 ELECTROMAGNETIC COMPATIBILITY MAINLY FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL EQUIPMENT. GENERAL INTRODUCTION.
NF C44-054-21*NF EN 62054-21:2006 Electricity metering (a.c.) - Tariff and load control - Part 21 : particular requirements for time switches
NF V01-005:2017 Quality management system for agricultural activities - Model for the control of reciprocal commitments between producers and their agricultural structures, to meet the clients and stakeholders expectations
NF EN 61158-4:2004 Communications numériques pour les systèmes de mesure et de commande - Bus de terrain utilisés dans les systèmes de commande industriels - Partie 4 : spécification du protocole de la couche de liaison de données
NF ISO 1217/A1:2016 Compresseurs volumétriques - Essais de réception - Amendement 1 : calcul de du rendement isenthropique et relation avec l'énergie spécifique
XP ISO/TS 7821:2005 Tabac et produits du tabac - Préparation et constitution d'échantillons identiques à partir d'un même lot pour la conduite d'essais comparatifs portant sur la qualité des méthodes d'essai
NF EN 50332-2:2014 Équipement de systèmes acoustiques : casques et écouteurs associés avec un baladeur - Méthode de mesure de niveau maximal de pression acoustique - Partie 2 : adaptation des équipements avec des écouteurs provenant de différents fabricants, ou p...
NF EN 61300-3-13:1998 Dispositifs d'interconnexion et composants passifs - Méthodes fondamentales d'essais et de mesures - Partie 3-13 : examens et mesures. Stabilité de contrôle d'un interrupteur pour fibres optiques
FD X07-007:2005 Metrology - Implementation guide for NF EN ISO 10012 "Measurement management systems - Requirements for measurement processes and measuring equipment" - Design development, control and improvement of measurement or test processes
NF X31-620-2:2021 Qualité du sol - Prestations de services relatives aux sites et sols pollués - Partie 2 : exigences dans le domaine des prestations d'études, d'assistance et de contrôle
NF EN 4705:2020 Série aérospatiale - Méthodes de mesure du comportement lié à la durée de vie des systèmes d'éclairage dans un environnement normalisé destiné aux aéronefs
NF EN ISO 4259-4:2022 Produits pétroliers et connexes - Fidélité des méthodes de mesure et de leurs résultats - Partie 4 : utilisation de cartes de contrôle statistique pour valider l'état 'sous maîtrise statistique' pour l'exécution d'une méthode d'essai no...
NF X50-141-5:2019 Customer-supplier relations - Quality of demonstrations (tests, calculations, simulations, etc.) - Part 5 : guidelines to manage the risks associated to processes of demonstration
NF EN 61788-16:2013 Supraconductivité - Partie 16 : mesures de caractéristiques électroniques - Résistance de surface des supraconducteurs aux hyperfréquences en fonction de la puissance
NF C46-890*NF EN IEC 62890:2020 Industrial-process measurement, control and automation - Life-cycle-management for systems and components

British Standards Institution (BSI), The relationship between measurement and control

BS EN 61784-1:2004 Digital data communications for measurement and control - Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems
BS EN ISO 15007-1:2002 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Definitions and parameters
BS EN ISO 15007-1:2014 Road vehicles. Measurement of driver visual behaviour with respect to transport information and control systems. Definitions and parameters
PD IEC TS 63074:2023 Tracked Changes. Safety of machinery. Security aspects related to functional safety of safety-related control systems
BS DD ISO/TS 29041:2009 Gas mixtures - Gravimetric preparation - Mastering correlations in composition
BS EN 954-1:1997 Safety of machinery - Safety related parts of control systems - General principles for design
BS EN 61069-8:1999 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of non-task related system properties
BS EN ISO 14644-2:2000 Cleanrooms and associated controlled environments - Specifications for testing and monitoring to prove continued compliance with ISO 14644-1
BS EN 50123-7-1:2003 Railway applications - Fixed installations - d.c. switchgear - Measurement, control and protection devices for specific use in d.c. traction systems - Measurement, control and protection devices for specific use in d.c. traction systems - Application guid
BS EN 62054-21:2004 Electricity metering equipment (a.c.) - Tariff and load control - Particular requirements for time switches
BS EN 60947-5-4:2003+A1:2019 Low-voltage switchgear and controlgear - Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests
BS EN 61326-3-1:2008 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial a
BS EN 61326-3-1:2009 Electrical equipment for measurement, control and laboratory use. EMC requirements. Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety). General industrial applications
BS EN 62061:2005 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
BS IEC 61588:2008 Precision clock synchronization protocol for networked measurement and control systems
BS IEC 61588:2021 Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
BS EN 61326-3-2:2008 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applicati
FD E09-027-1999 Safety of machinery - Safety-related parts of control systems - Part 100 : guide on the use and application of EN 954-1:1996.
PD IEC TS 62607-5-3:2020 Nanomanufacturing. Key control characteristics. Thin-film organic/nano electronic devices. Measurements of charge carrier concentration
BS DD IEC/PAS 62443-3:2008 Security for industrial process measurement and control - Network and system security
DD IEC/PAS 62443-3:2008 Security for industrial process measurement and control - Network and system security
BS EN 62061:2005+A1:2013 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
PD IEC TS 62872-1:2019 Tracked Changes. Industrial-process measurement, control and automation. System interface between industrial facilities and the smart grid
BS ISO 14385-2:2014 Stationary source emissions. Greenhouse gases. Ongoing quality control of automated measuring systems
BS EN 61300-3-13:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Control stability of a fibre optic switch
PD CEN ISO/ASTM TR 52952:2023 Additive manufacturing of metals. Feedstock materials. Correlating of rotating drum measurement with powder spreadability in PBF-LB machines
PD IEC/TS 62607-4-2:2016 Nanomanufacturing. Key control characteristics. Nano-enabled electrical energy storage. Physical characterization of cathode nanomaterials, density measurement
BS EN 62382:2013 Control systems in the process industry. Electrical and instrumentation loop check
PD IEC TS 62607-9-1:2021 Nanomanufacturing. Key control characteristics. Traceable spatially resolved nano-scale stray magnetic field measurements. Magnetic force microscopy
BS EN 61069-7:1999 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system safety
PD IEC TS 62607-3-3:2020 Nanomanufacturing. Key control characteristics. Luminescent nanomaterials. Determination of fluorescence lifetime of semiconductor quantum dots using time correlated single photon counting (TCSPC)
BS IEC 61504:2000 Nuclear power plants - Instrumentation and control systems important to safety - Plant-wide radiation monitoring
BS DD ENV 50123-7-1:1999 Railway applications - Fixed installations - d.c. switchgear - Measurement, control and protection devices for specific use in d.c. traction systems - Application guide
BS EN 62056-61:2002 Electricity metering - Data exchange for meter reading, tariff and load control - Object identification system (OBIS)
BS PD IEC/TS 62607-4-3:2015 Nanomanufacturing. Key control characteristics. Nano-enabled electrical energy storage. Contact and coating resistivity measurements for nanomaterials
PD IEC/TS 62607-4-6:2018 Nanomanufacturing. Key control characteristics. Nano-enabled electrical energy storage. Determination of carbon content for nano-enabled electrode materials, infrared absorption method
BS EN 61069-4:1998 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system performance
BS EN 62056-61:2007 Electricity metering - Data exchange for meter reading, tariff and load control - Object identification system (OBIS)
BS EN ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials
PD IEC/TS 62607-4-3:2015 Nanomanufacturing. Key control characteristics. Nano-enabled electrical energy storage. Contact and coating resistivity measurements for nanomaterials
BS EN 61069-6:1998 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system operability
BS EN 50152-3-1:2004 Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Measurement, control and protection devices for specific use in a.c. traction systems - Application guide
BS EN 61326-3-1:2017 Electrical equipment for measurement, control and laboratory use. EMC requirements. Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial appli...
BS EN IEC 61326-3-2:2018 Tracked Changes. Electrical equipment for measurement, control and laboratory use. EMC requirements. Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety). Industrial applica...
PD IEC TS 62786-41:2023 Distributed energy resources connection with the grid. Requirements for frequency measurement used to control distributed energy resources (DER) and loads
BS ISO 19455-1:2019 Planning for functional performance testing for building commissioning - Secondary hydronic pump, system and associated controls
BS EN ISO 11137-3:2017 Tracked Changes. Sterilization of health care products. Radiation. Guidance on dosimetric aspects of development, validation and routine control
PD IEC TS 62607-4-8:2020 Nanomanufacturing. Key control characteristics. Nano-enabled electrical energy storage. Determination of water content in electrode nanomaterials, Karl Fischer method
BS EN IEC 62890:2020 Industrial-process measurement, control and automation. Life-cycle-management for systems and components
BS 6840-8:1988 Sound system equipment. Methods for specifying and measuring the characteristics of automatic gain control devices

Professional Standard - Post and Telecommunication, The relationship between measurement and control

YD/T 1663-2007 Testing Methods for Bearer Independent Call Control

SAE - SAE International, The relationship between measurement and control

SAE AIR4366-1996 Issues and Concerns Associated with Electronic Propulsion Control System Partitioning
SAE AIR4366A-2007 Issues and Concerns Associated with Electronic Propulsion Control System Partitioning

International Electrotechnical Commission (IEC), The relationship between measurement and control

IEC 61784-1:2003 Digital data communications for measurement and control - Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems
IEC 60552:1977 CAMAC - Organization of multi-crate systems. Specifications of the Branch-highway and CAMAC crate controller Type A1
IEC 60729:1982 Multiple controllers in a CAMAC crate
IEC TR 62195:2000 Power system control and associated communications - Deregulated energy market communciations
IEC 60552:1977/AMD1:1984 CAMAC - Organization of multi-crate systems. Specifications of the Branch-highway and CAMAC crate controller Type A1
IEC TR 63074:2019 Safety of machinery - Security aspects related to functional safety of safety-related control systems
IEC TS 63074:2023 Safety of machinery - Security aspects related to functional safety of safety-related control systems
IEC 60640:1979 CAMAC - Serial Highway Interface System
IEC 61038:1998 Electricity metering - Tariff and load control - Particular requirements for time switches
IEC 60516:1975 A modular instrumentation system for data handling; CAMAC system
IEC 60640:1979/AMD1:1984 CAMAC - Serial Highway Interface System
IEC 60516:1975/AMD1:1984 A modular instrumentation system for data handling; CAMAC system
IEC 60946:1988 Binary direct voltage signals for process measurement and control systems
IEC TR 61131-8:2017 Industrial-process measurement and control - Programmable controllers - Part 8: Guidelines for the application and implementation of programming languages
IEC 60678:1980 Definitions of CAMAC terms used in IEC publications
IEC 61069-8:1999 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of non-task-related system properties
IEC 62061:2005 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
IEC TS 62607-3-2:2017 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion
IEC 61588:2021*IEEE Std 1588 Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEC 61588:2009 Precision clock synchronization protocol for networked measurement and control systems
IEC 61588:2004 Precision clock synchronization protocol for networked measurement and control systems
IEC 61588:2021 Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEC 62054-21:2004 Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches
IEC 61326-3-1:2008 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety related functions (functional safety) - General industrial applic
IEC TR 62235:2005 Nuclear facilities - Instrumentation and control systems important to safety - Systems of interim storage and final repository of nuclear fuel and waste
IEC PAS 61499-1:2000 Function blocks for industrial-process measurement and control systems - Part 1: Architecture
IEC PAS 62443-3:2008 Security for industrial process measurement and control - Network and system security
IEC TS 62607-6-4:2016 Nanomanufacturing - Key control characteristics - Part 6-4: Graphene - Surface conductance measurement using resonant cavity
IEC 62061:2005/COR2:2008 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems; Corrigendum 2
IEC 62382:2012 Control systems in the process industry - Electrical and instrumentation loop check
IEC 113/203/CD:2013 IEC/TS 62607-3-2: Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion
IEC TS 62607-5-4:2022 Nanomanufacturing - Key control characteristics - Part 5-4: Energy band gap measurement of nanomaterials by electron energy loss spectroscopy (EELS)
IEC 61326-3-1:2008/COR1:2008 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applic
IEC TR 61158-1:2003 Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 1: Overview anf guidance for the IEC 61158 series
IEC 61326-3-2:2008 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety related functions (functional safety) - Industrial applications w
IEC 61987-10:2009/COR1:2012 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 10: Lists of properties (LOPs) for industrial-process measurement and control for electronic data exchange - Fundamentals
IEC 60315-9:1996 Methods of measurement on radio receivers for various classes of emission - Part 9: Measurement of the characteristics relevant to radio data system (RDS) reception
IEC TS 62607-5-3:2020 Nanomanufacturing - Key control characteristics - Part 5-3: Thin-film organic/nano electronic devices – Measurements of charge carrier concentration
IEC 62890:2020 Industrial-process measurement, control and automation - Life-cycle-management for systems and components

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., The relationship between measurement and control

ASHRAE 4204-1998 Sampling Interval Magnitude Relation to Digital PI Control System Performance
ASHRAE 4762-2005 Development and Testing of an Integrated Daylighting Control System
ASHRAE AT-96-1-1-1996 Development and Testing of a Prototype Tool for HVAC Control System Commissioning
ASHRAE QC-06-010-2006 Relationship between Energy Wheel Speed and Effectiveness and its Transient Response@ Part II: Comparison Between Mathematical Model Predictions and Experimental Measurements and Uncertainty Analysis
ASHRAE OR-10-058-2010 Relationship between HVAC Airflow Rates and Noise Levels@ and Noise Control in a Mechanically-Ventilated University Building
ASHRAE 4368-2000 Error Analysis of Measurement and Control Techniques of Outside Air Intake Rates in VAV Systems (RP-980)

International Telecommunication Union (ITU), The relationship between measurement and control

ITU-T H.248.11 CORR 1-2008 (Pre-Published) Gateway control protocol: Media gateway overload control package: Clarifying MG_overload event relationship to ADD commands Corrigendum 1
ITU-T Q.1990 FRENCH-2001 BICC bearer control tunnelling protocol
ITU-T Q.1990 SPANISH-2001 BICC bearer control tunnelling protocol
ITU-T Q.1902.5 FRENCH-2001 Bearer Independent Call Control protocol (Capability Set 2): Exceptions to the application transport mechanism in the context of BICC
ITU-T Q.1902.5 SPANISH-2001 Bearer Independent Call Control protocol (Capability Set 2): Exceptions to the application transport mechanism in the context of BICC
ITU-T Q.1902.5-2001 Bearer Independent Call Control Protocol (Capability Set 2): Exceptions to the Application Transport Mechanism in the Context of BICC Series Q: Switching and Signalling Specifications of Signalling Related to Bearer Independent Call Control (BICC) Study G
ITU-T Q.1930 FRENCH-2002 BICC access network protocol
ITU-T Q.1901 CORR 1 FRENCH-2002 Bearer Independent Call Control protocol Corrigendum 1
ITU-T Q.1901 CORR 1 SPANISH-2002 Bearer Independent Call Control protocol Corrigendum 1
ITU-T Q.1912.4 FRENCH-2001 Interworking between Digital Subscriber Signalling System No. 2 and the Bearer Independent Call Control protocol
ITU-T Q.1912.3 FRENCH-2001 Interworking between H.323 and the Bearer Independent Call Control protocol
ITU-T Q.1912.3 SPANISH-2001 Interworking between H.323 and the Bearer Independent Call Control protocol
ITU-T Q.1902.4 AMD 1 FRENCH-2002 Bearer Independent Call Control protocol (Capability Set 2): Basic call procedures Amendment 1: Support for the International Emergency Preference Scheme
ITU-T Q.1902.4 FRENCH-2001 Bearer independent call control protocol (Capability Set 2): Basic call procedures
ITU-T Q.1902.4 AMD 1 SPANISH-2002 Bearer Independent Call Control protocol (Capability Set 2): Basic call procedures Amendment 1: Support for the International Emergency Preference Scheme
ITU-T Q.1902.4 SPANISH-2001 Bearer independent call control protocol (Capability Set 2): Basic call procedures
ITU-T Q.1912.2 FRENCH-2001 Interworking between selected signalling systems (PSTN access, DSS1, C5, R1, R2, TUP) and the Bearer Independent Call Control protocol
ITU-T Q.1912.2 SPANISH-2001 Interworking between selected signalling systems (PSTN access, DSS1, C5, R1, R2, TUP) and the Bearer Independent Call Control protocol
ITU-T Q.1922.4 FRENCH-2002 Interaction between the Intelligent Network application CS-4 protocol and the Bearer Independent Call Control protocol
ITU-T Q.1922.4 SPANISH-2002 Interaction between the Intelligent Network application CS-4 protocol and the Bearer Independent Call Control protocol
ITU-T Q.1912.1 FRENCH-2001 Interworking between Signalling System No. 7 ISDN user part and the Bearer Independent Call Control protocol
ITU-T Q.1912.1 SPANISH-2001 Interworking between Signalling System No. 7 ISDN user part and the Bearer Independent Call Control protocol
ITU-T Q.1902.4 AMD 2 SPANISH-2004 Bearer Independent Call Control protocol (Capability Set 2): Basic call procedures Amendment 2
ITU-T J.176-2002 IPCablecom management event mechanism MIB SERIES J: CABLE NETWORKS AND TRANSMISSION OF TELEVISION SOUND PROGRAMME AND OTHER MULTIMEDIA SIGNALS IPCablecom Study Group 9
ITU-T Q.1922.2 FRENCH-2001 Interaction between the Intelligent Network Application Protocol Capability Set 2 and the Bearer Independent Call Control protocol
ITU-T Q.1922.2 SPANISH-2001 Interaction between the Intelligent Network Application Protocol Capability Set 2 and the Bearer Independent Call Control protocol
ITU-T Q.1912.4 SPANISH-2001 Interworking between Digital Subscriber Signalling System No. 2 and the Bearer Independent Call Control protocol
ITU-T Q.1912.5 FRENCH-2004 Interworking between Session Initiation Protocol (SIP) and Bearer Independent Call Control protocol or ISDN User Part
ITU-T Q.1912.5 SPANISH-2004 Interworking between Session Initiation Protocol (SIP) and Bearer Independent Call Control protocol or ISDN User Part
ITU-T Q.1902.3 FRENCH-2001 Bearer independent call control protocol (Capability Set 2) and Signalling System No. 7 ISDN user part: Formats and codes
ITU-T H.248.4 CORR 1-2004 Gateway control protocol: Transport over Stream Control Transmission Protocol (SCTP) Corrigendum 1 SERIES H: AUDIOVISUAL AND MULTIMEDIA SYSTEMS Infrastructure of audiovisual services ?Communication procedures Study Group 16
ITU-T H.248.4-2000 SERIES H: AUDIOVISUAL AND MULTIMEDIA SYSTEMS Infrastructure of audiovisual services ?Communication procedures Gateway control protocol: Transport over Stream Control Transmission Protocol (SCTP) Study Group 16
ITU-T Q.1902.3 AMD 2 FRENCH-2004 Bearer Independent Call Control protocol (Capability Set 2) and Signalling System No. 7 ISDN User Part: Formats and codes Amendment 2
ITU-T Q.1902.3 AMD 2 SPANISH-2004 Bearer Independent Call Control protocol (Capability Set 2) and Signalling System No. 7 ISDN User Part: Formats and codes Amendment 2
ITU-T Q.1902.2 AMD 1 FRENCH-2002 Bearer Independent Call Control protocol (Capability Set 2) and Signalling System No. 7 ISDN User Part: General functions of messages and parameters Amendment 1: Support for the International Emergency Preference Scheme
ITU-T Q.1902.2 FRENCH-2001 Bearer Independent Call Control protocol (Capability Set 2) and Signalling System No. 7 ISDN user part: General functions of messages and parameters
ITU-T Q.1902.2 AMD 1 SPANISH-2002 Bearer Independent Call Control protocol (Capability Set 2) and Signalling System No. 7 ISDN User Part: General functions of messages and parameters Amendment 1: Support for the International Emergency Preference Scheme
ITU-T Q.1902.2 SPANISH-2001 Bearer Independent Call Control protocol (Capability Set 2) and Signalling System No. 7 ISDN user part: General functions of messages and parameters
ITU-T SERIES Q SUPP 22-1999 Technical Report TRQ.3000: Operation of the Bearer Independent Call Control (BICC) Protocol with Digital Subscriber Signalling System NO.2 (DSS2) Services Q: Switching and Signalling Study Group 11; 18 pp
ITU-T Q.1902.2 AMD 2 FRENCH-2004 Bearer Independent Call Control protocol (Capability Set 2) and Signalling System No. 7 ISDN user part: General functions of messages and parameters Amendment 2
ITU-T Q.1902.2 AMD 2 SPANISH-2004 Bearer Independent Call Control protocol (Capability Set 2) and Signalling System No. 7 ISDN user part: General functions of messages and parameters Amendment 2
ITU-T Q.1902.6 SPANISH-2001 Bearer Independent Call Control protocol (Capability Set 2): Generic signalling procedures for the support of the ISDN user part supplementary services and for bearer redirection
ITU-T Q.1902.6 FRENCH-2001 Bearer Independent Call Control protocol (Capability Set 2): Generic signalling procedures for the support of the ISDN user part supplementary services and for bearer redirection
ITU-T Q.1902.6 AMD 1 SPANISH-2004 Bearer Independent Call Control protocol (Capability Set 2): Generic signalling procedures for the support of the ISDN User Part supplementary services and for bearer redirection Amendment 1
ITU-T O.33-1995 Automatic Equipment for Rapidly Measuring Stereophonic Pairs and Monophonic Sound-Programme Circuits Links and Connections - Specifications for Measuring Equipment Study Group 4; 15 pp
ITU-T Q.1902.3 AMD 1 FRENCH-2002 Bearer Independent Call Control protocol (Capability Set 2) and Signalling System No. 7 ISDN User Part: Formats and codes Amendment 1: Support for the International Emergency Preference Scheme
ITU-T Q.1902.3 AMD 1 SPANISH-2002 Bearer Independent Call Control protocol (Capability Set 2) and Signalling System No. 7 ISDN User Part: Formats and codes Amendment 1: Support for the International Emergency Preference Scheme
ITU-T J.174-2002 SERIES J: CABLE NETWORKS AND TRANSMISSION OF TELEVISION SOUND PROGRAMME AND OTHER MULTIMEDIA SIGNALS IPCablecom IPCablecom interdomain quality of service Study Group 9
ITU-T M.732-1989 Signalling and Switching Routine Maintenance Tests and Measurements - General Maintenance Principles - Maintenance of International Transmission Systems and Telephone Circuits (Study Group IV) 2 pp

Association of German Mechanical Engineers, The relationship between measurement and control

VDI 3783 Blatt 13-2010 Environmental meteorology - Quality control concerning air quality forecast - Plant-related pollution control - Dispersion calculation according to TA Luft
VDI 4250 Blatt 3-2016 Bioaerosols and biological agents - Installation-specific measurement parameters and assessment values relevant to environmental health

RO-ASRO, The relationship between measurement and control

STAS R 12581-1987 CAMAC SYSTEM Block transfers

Professional Standard - Nuclear Industry, The relationship between measurement and control

EJ/T 782-1993 Control and Measurement of U2Si-Al Fuel Plate Uranium-235 Loading

GOSTR, The relationship between measurement and control

GOST R 8.703-2020 State system for ensuring the uniformity of measurements. Nuclear material control and accounting. Measurement system. Main principles
GOST R 8.984-2019 State system for ensuring the uniformity of measurements. Internal quality control of measurements in the field of the use of atomic energy
GOST R 8.609-2018 State system for ensuring the uniformity of measurements. Certified reference materials of state accounting and control of nuclear materials system. Basic principles
GOST R IEC 61513-2020 Instrumental and control systems important to safety of nuclear power plants. General requirements
GOST R 50.05.08-2018 Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of control. Unified methods. Visual and measuring control
GOST R 8.960-2019 State system for ensuring the uniformity of measurements. Best available techniques. Metrological maintenance of automated measuring systems for control of harmful industrial emissions. Main principles

Professional Standard - Electricity, The relationship between measurement and control

DL/T 658-2006 Code for acceptance test of on-off control system in fossil fuel power plant
DL/T 658-2017 Acceptance test procedure for switch quantity control system in thermal power plant

KR-KS, The relationship between measurement and control

KS C IEC TR 63074-2023 Safety of machinery — Security aspects related to functional safety of safety-related control systems
KS R ISO 15007-2023 Road vehicles Measurement and analysis of driver visual behaviour with respect to transport information and control systems
KS C IEC TS 62872-2020 Industrial-process measurement, control and automation system interface between industrial facilities and the smart grid
KS R ISO 15007-1-2019 Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters
KS C IEC TS 62607-6-4-2022 Nanomanufacturing — Key control characteristics — Part 6-4: Graphene — Surface conductance measurement using resonant cavity
KS C IEC TR 62051-1-2017 Electricity metering - Data exchange for meter reading, tariff and load control - Glossary of terms - Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM

AT-ON, The relationship between measurement and control

ONORM A 9032-1995 Safety functions in safety relevant Systems by means of industrial measurement and control technology
ONORM M 7160-1993 Basic concepts of energy economy - Measurement and control technology

CZ-CSN, The relationship between measurement and control

CSN 18 0051-1983 Symbolic representation for measuring and control systems
CSN ON 18 0060-1964
CSN IEC 946:1992 Binary direct voltage signals for process measurement and control systems
CSN 02 7202-1991 Mean of industrial-process measurement and control. Thermometer pockets with internal thread. Basic dimensions
CSN 47 0175-1984 Agricultural and forestry machinery and tractors Methods of measuring forces on the control elements Safety of work

Institute of Electrical and Electronics Engineers (IEEE), The relationship between measurement and control

IEEE 1588/INT 1-10-2009 IEEE Standards Interpretations for IEEE Std 1588 ™-2008 IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE 498-1990 Requirements for the calibration and control of measuring and test equipment used in nuclear facilities
IEEE 1289-1998 Guide for the Application of Human Factors Engineering in the Design of Computer-Based Monitoring and Control Displays for Nuclear Power Generating Stations
IEEE 1588-2002 Precision clock synchronization protocol for networked measurement and control systems
IEEE 1588-2019 IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE Std 1588-2008 IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE Std 1588-2002 IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE Std 1588-2019 IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE PC37.242/D12, December 2012 IEEE Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMUs) for Power System Protection and Control
IEEE Std C37.242-2021 IEEE Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMUs) for Power System Protection and Control
ANSI/IEEE Std 683-1976 IEEE Recommended Practice for Block Transfers in CAMAC Systems (Computer Automated Measurement and Control)
IEEE PC37.242/D10, September 2012 IEEE Draft Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMU) for Power System Protection and Control
IEEE PC37.242/D3, September 2020 IEEE Draft Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMUs) for Power System Protection and Control
IEEE PC37.242/D2, January 2020 IEEE Draft Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMUs) for Power System Protection and Control
IEEE PC37.242/D4, September 2020 IEEE Draft Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMUs) for Power System Protection and Control
IEEE PC37.244 D6.0 January 23, 2013 IEEE Guide for Phasor Data Concentrator Requirements for Power System Protection, Control, andMonitoring
IEEE 1885-2022 IEEE Guide for Assessing, Measuring, and Verifying Volt-Var Control and Optimization on Distribution Systems
IEEE 1588*IEC 61588-2004 IEC/IEEE International Standard - Precision clock synchronization protocol for networked measurement and control systems
IEEE 61588-2004 IEC/IEEE International Standard - Precision clock synchronization protocol for networked measurement and control systems
IEEE Std 1885-2022 IEEE Guide for Assessing, Measuring, and Verifying Volt-Var Control and Optimization on Distribution Systems
IEC 61588:2009(E) IEC/IEEE International Standard - Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEC/IEEE 61588-2021 IEC/IEEE International Standard - Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE PC37.242/D11, October 2012 IEEE Approved Draft Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMU) for Power System Protection and Control

Danish Standards Foundation, The relationship between measurement and control

DS/EN ISO 15007-1:2002 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters
DS/EN 61069-8:2000 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of non-task-related properties
DS/EN 60947-5-4:2004 Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests
DS/IEC 61588:2021 Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
DS/EN 50010:1994 Low voltage switchgear and controlgear for industrial use - Inductive proximity switches - Methods for measuring the operating distance and operating frequency
DS/EN 50350:2004 Charging control systems for household electric room heating of the storage type - Methods for measuring performance
DS/EN 61300-3-13:1998 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-13: Examinations and measurements - Control stability of a fibre optic switch

IET - Institution of Engineering and Technology, The relationship between measurement and control

APPL DIM ANALY SYS MDL CNTRL DES-2013 Application of Dimensional Analysis in Systems Modeling and Control Design

IEC - International Electrotechnical Commission, The relationship between measurement and control

IEC 61784-1/COR1:2004 Digital data communications for measurement and control – Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems CORRIGENDUM 1 (Edition 1.0)
IEC 61158 Digital data communications for measurement and control - Fieldbus for use in industrial control systems (***CONTAINS ALL IEC 61158 STANDARDS***)
TS 62607-3-2-2017 Nanomanufacturing – Key control characteristics – Part 3-2: Luminescent nanoparticles – Determination of mass of quantum dot dispersion (Edition 1.0)
PAS 61499-1-2000 Function Blocks for Industrial-Process Measurement and Control Systems Part 1: Architecture (Edition 1.0)

The Aluminum Association, The relationship between measurement and control

AA T-5-1987 Position on Fracture Toughness Requirements and Quality Control Testing

United States Navy, The relationship between measurement and control

NAVY MIL-F-18372 NOTICE 1-1997 FLIGHT CONTROL SYSTEMS: DESIGN, INSTALLATION AND TEST OF, AIRCRAFT (GENERAL SPECIFICATION FOR)
NAVY MIL-F-18372-1955 FLIGHT CONTROL SYSTEMS: DESIGN, INSTALLATION AND TEST OF, AIRCRAFT (GENERAL SPECIFICATION FOR)

Korean Agency for Technology and Standards (KATS), The relationship between measurement and control

KS M ISO 4124:2003 Liquid hydrocarbons-Dynamic measurement-Statistical control of volumetric metering systems
KS M ISO 4124:2013 Liquid hydrocarbons-Dynamic measurement-Statistical control of volumetric metering systems
KS M ISO 4124-2003(2008) Liquid hydrocarbons－Dynamic measurement－Statistical control of volumetric metering systems
KS C IEC 60946:2005 Binary direct voltage signals for process measurement and control systems
KS C IEC 60946:2013 Binary direct voltage signals for process measurement and control systems
KS B 6510-1991(2016) Test Methods for Electro-hydraulic Proportional Series Flow Control Valves
KS C IEC TS 62872:2020 Industrial-process measurement, control and automation system interface between industrial facilities and the smart grid
KS C IEC 61069-8:2005 Industrial-process measurement and control-Evaluation of system properties for the purpose of system assessment-Part 8:Assessment of non-task-related system properties
KS C IEC 61069-8:2013 Industrial-process measurement and control－Evaluation of system properties for the purpose of system assessment－Part 8：Assessment of non-task-related system properties
KS R ISO 15007-1:2009 Road vehicles-Measurement of driver visual behaviour with respect to transport information and control systems-Part 1:Definitions and parameters
KS C IEC 60946-2005(2010) Binary direct voltage signals for process measurement and control systems
KS I ISO 14644-2:2007 Cleanrooms and associated controlled environments－Part 2：Specifications for testing and monitoring to prove continued compliance with KS M ISO 14644－1
KS C IEC 61069-8-2005(2010) Industrial-process measurement and control－Evaluation of system properties for the purpose of system assessment－Part 8：Assessment of non-task-related system properties
KS C IEC 61250-2006(2021) Nuclear reactors－Instrumentation and control systems important for safety－Detection of leakage in coolant systems
KS R ISO 15007-1:2019 Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters
KS C IEC TS 62607-6-4:2022 Nanomanufacturing — Key control characteristics — Part 6-4: Graphene — Surface conductance measurement using resonant cavity
KS C IEC TR 62051-1:2017 Electricity metering - Data exchange for meter reading, tariff and load control - Glossary of terms - Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM
KS C IEC 61504:2012 Nuclear power plants－Instrumentation and control systems important to safety－Plant-wide radiation monitoring
KS C IEC 60315-9-2004(2009) Methods of measurement on radio receivers for various classesof emission－Part 9：Measurement of the characteristicsrelevant to radio dats system(RDS) reception
KS B 8302-2021 Control device for connecting regeneration power of elevator and escalator system to grid — Part 1-1: Elevator —Measuring and testing method
KS C IEC 61158-6-2014(2019) Digital data communications for measurement and control — Fieldbus for use in industrial control systems — Part 6: Application Layer Protocol specification
KS C IEC 61158-5-2014(2019) Digital data communications for measurement and control — Fieldbus for use in industrial control systems — Part 5: Application Layer Service definition

Professional Standard - Chemical Industry, The relationship between measurement and control

HG/T 20505-2014 Functional identification and symbols for process measuring and controlling instrumentation
HG/T 20505-2000 Functional identification and symbols for process measuring and controlling instrumentation
HG/T 20505-2000（条文说明） Function signs and graphic symbols of process measurement and control instruments

Professional Standard - Agriculture, The relationship between measurement and control

CNAS-EC-065-2021 Instructions on Recognition Conversion of Version Change of
水和废水监测分析方法 3.5.3-2003 Part Three Comprehensive Indicators and Inorganic Pollutants Chapter Five Water Quality Automatic Monitoring System Three Quality Control and Quality Assurance

EU/EC - European Union/Commission Legislative Documents, The relationship between measurement and control

2016/919-2016 REGULATIONS COMMISSION REGULATION on the technical specification for interoperability relating to the ‘control-command and signalling’ subsystems of the rail system in the European Union (Text with EEA relevance)
2006/860/EC-2006 COMMISSION ENCOMMISSION DECISION concerning a technical specification for interoperability relating to the control-command and signalling subsystem of the trans-European high speed rail system and modifying Annex A to Decision 2006/679/EC concerning the t

Lithuanian Standards Office , The relationship between measurement and control

LST EN ISO 15007-1:2003 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters (ISO 15007-1:2002)
LST HD 557 S1-2002 Binary direct voltage signals for process measurement and control systems (IEC 60946:1988)
LST EN 61069-8-2002 Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Part 8: Assessment of non-task-related system properties (IEC 61069-8:1999)
LST EN 60947-5-4-2004 Low-voltage switchgear and controlgear. Part 5-4: Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests (IEC 60947-5-4:2002)

GM Europe, The relationship between measurement and control

GME 14031-2007 Noise Measurements on Steering Angle Velocity Controlled EHPS Systems
GME14031-2007 Ger盲uschmessungen an lenkwinkelgeschwindigkeitsgeregelten Lenkhilfesystemen (EHPS) Noise Measurements on Steering Angle Velocity Controlled EHPS Systems English/German; Includes Appendix A; Note: This specification may be applied only for current projec

International Organization for Standardization (ISO), The relationship between measurement and control

ISO 4124:1994 Liquid hydrocarbons - Dynamic measurement - Statistical control of volumetric metering systems
ISO 15007:2020 Road vehicles — Measurement and analysis of driver visual behaviour with respect to transport information and control systems
ISO 22093:2011 Industrial automation systems and integration - Physical device control - Dimensional Measuring Interface Standard (DMIS)
ISO 16378:2022 Space systems — Measurements of thermo-optical properties of thermal control materials
ISO 14644-2:2000 Cleanrooms and associated controlled environments - Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1
ISO 15007-1:2002 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters
ISO 15007-1:2014 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters
ISO 3968:2001/cor 1:2002 Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow characteristics; Technical Corrigendum 1
ISO 14644-2:2015 Cleanrooms and associated controlled environments - Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
ISO/ASTM TR 52952:2023 Additive manufacturing of metals — Feedstock materials — Correlating of rotating drum measurement with powder spreadability in PBF-LB machines
ISO 14385-2:2014 Stationary source emissions - Greenhouse gases - Part 2: Ongoing quality control of automated measuring systems

未注明发布机构, The relationship between measurement and control

BS 7986:2005(2011) Data quality metrics for industrial measurement and control systems — Specification
BS EN 60315-9:1997 Methods of Measurement on radio receivers for various classes ofemission — Part 9 : Measurement ofthe characteristics relevant to radio data system (RDS) reception

AENOR, The relationship between measurement and control

UNE-EN ISO 15007-1:2015 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters (ISO 15007-1:2014)
UNE 179006:2013 System for surveillance, prevention and control of infections related to health care in hospitals. Requirements
UNE 20836:1992 BINARY DIRECT VOLTAGE SIGNALS FOR PROCESS MEASUREMENT AND CONTROL SYSTEMS.
UNE-EN 50350:2005 Charging control systems for household electric room heating of the storage type - Methods for measuring performance
UNE-EN 61300-3-13:1999 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-13: EXAMINATIONS AND MEASUREMENTS. CONTROL STABILITY OF A FIBRE OPTIC SWITCH.

Professional Standard - Hygiene , The relationship between measurement and control

WS 262-2006 Specincation for radiological protection of patients and quality control in Y-ray source afterloading brachytherapy

American National Standards Institute （ANSI), The relationship between measurement and control

ANSI/ISA S82.01-1994 Electric and Electronic Test, Measuring, Controlling, and Related Equipment: General Requirements
ANSI/RIA R15.05.2-1992 ndustrial Robots and Robot Systems - Path-Related and Dynamic Performance Characteristics - Evaluation
ANSI/ISA 71.04-2013 Environmental Conditions for Process Measurement and Control Systems: Airborne Contaminants

ISA - International Society of Automation, The relationship between measurement and control

ISA 71.02-1991 Environmental Conditions for Process Measurement and Control Systems: Power
ISA 82.02.01-1999 Safety Standard for Electrical and Electronic Test@ Measuring@ Controlling@ and Related Equipment - General Requirements

CEN - European Committee for Standardization, The relationship between measurement and control

EN ISO 13849-1:2006 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
EN ISO 13849-1:2008 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
EN ISO 15007-1:2002 Road Vehicles - Measurement of Driver Visual Behaviour with Respect to Transport Information and Control Systems - Part 1: Definitions and Parameters

European Committee for Standardization (CEN), The relationship between measurement and control

EN ISO 13849-1:2023 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2023)
EN ISO 15007-1:2014 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters (ISO 15007-1:2014)
EN ISO 14644-2:2000 Cleanrooms and Associated Controlled Environments - Part 2: Specifications for Testing and Monitoring to Prove Continued Compliance with ISO 14644-1 ISO 14644-2:2000
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN 50010:1987 Low voltage switchgear and controlgear for industrial use; Inductive proximity switches : Methods for measuring the operating distance and operating frequency
EN ISO 14644-2:2015 Cleanrooms and associated controlled environments - Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration

Standard Association of Australia （SAA）, The relationship between measurement and control

AS/NZS IEC 60947.5.4:2015
AS ISO 22093:2004 Industrial automation systems and integration - Physical device control - Dimensional Measuring Interface Standard (DMIS)
AS ISO 4124:2007 Liquid hydrocarbons - Dynamic measurement - Statistical control of volumetric metering systems

CU-NC, The relationship between measurement and control

NC 00-37-1987 National System for Standardiza- tion, Metrology and Quality Control. Guide for the Elabora- tion of Precisión Measurement Standards

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, The relationship between measurement and control

ITU-T Q.1970-2001 BICC IP Bearer Control Protocol Series Q: Switching and Signalling Specifications of Signalling Related to Bearer Independent Call Control (BICC) (Study Group 11)
ITU-T Q.1912.2-2001 Interworking between Selected Signalling Systems (PSTN Access@ DSS1@ C5@ R1@ R2@ TUP) and the Bearer Independent Call Control Protocol; Series Q: Switching and Signalling; Specifications of Signalling Related to Bearer Independent Call Control (BICC) (Stu

European Telecommunications Standards Institute (ETSI), The relationship between measurement and control

ETSI ES 202 336-6-2012 Environmental Engineering (EE); Monitoring and Control Interface for Infrastructure Equipment (Power, Cooling and Building Environment Systems used in Telecommunication Networks); Part 6: Air Conditioning System control and monitoring information model (V
ETSI ES 202 336-4-2013 Environmental Engineering (EE); Monitoring and Control Interface for Infrastructure Equipment (Power@ Cooling and Building Environment Systems used in Telecommunication Networks); Part 4: AC distribution power system control and monitoring information mod

Indonesia Standards, The relationship between measurement and control

SNI 6886-2012 Metode uji penentuan hubungan kadar air dan densitas campuran tanah-semen
SNI IEC/TR 62235:2009 Nuclear facilities - Instrumentation and control systems important to safety - Systems of interim storage and final repository of nuclear fuel and waste

Japanese Industrial Standards Committee (JISC), The relationship between measurement and control

JIS B 9961:2008 Safety of machinery -- Functional safety of safety-related electrical, electronic and programmable electronic control systems
JIS B 9961 AMD 1:2015 Safety of machinery -- Functional safety of safety-related electrical, electronic and programmable electronic control systems (Amendment 1)

European Committee for Electrotechnical Standardization（CENELEC）, The relationship between measurement and control

EN 61069-8:2016 Industrial-process measurement@ control and automation - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of other system properties
EN 61069-8:1999 Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment Part 8: Assessment of Non-Task Related System Properties
EN 61326-3-1:2008 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applic
EN 61326-3-1:2017 Electrical equipment for measurement@ control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applic
EN 61326-3-2:2008 Electrical equipment for measurement@ control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications w
EN IEC 62890:2020 Industrial-process measurement, control and automation - Life-cycle-management for systems and components

IN-BIS, The relationship between measurement and control

IS 12556-1988
IS 13875 Pt.1-1993 Digital Measuring Instruments for Measurement and Control Part 1 General Specifications Concerning Terms Tests and Data Sheet Details
IS 8493-1977
IS 5047 Pt.2-1979

American Society for Testing and Materials (ASTM), The relationship between measurement and control

ASTM D5283-92(1997) Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation
ASTM D5283-18 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation
ASTM C1210-06 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
ASTM C1210-96e1 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
ASTM C1210-21 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within Nuclear Industry
ASTM C1210-12 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
ASTM C1210-18 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
ASTM D6299-22 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D6299-23e1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance

PH-BPS, The relationship between measurement and control

PNS IEC/TS 62607-3-2:2021 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion

National Association of Corrosion Engineers (NACE), The relationship between measurement and control

NACE TM0101-2012 Measurement Techniques Related to Criteria for Cathodic Protection of Underground Storage Tank Systems (Item No. 21240)
NACE TM0497-2002 Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems Item No. 21231
NACE TM0101-2001 Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Tank Systems Item No:21240

YU-JUS, The relationship between measurement and control

JUS N.N6.347-1981 Radiocommunications. Transmitters. Methods of rneasurement. Characteristics of transmitters relating to wanted modulation

Instrument Society of America (ISA), The relationship between measurement and control

ISA 71.04-2013 Environmental Conditions for Process Measurement and Control Systems: Airborne Contaminants

ETSI - European Telecommunications Standards Institute, The relationship between measurement and control

TR 103 305-2-2016 CYBER; Critical Security Controls for Effective Cyber Defence; Part 2: Measurement and auditing (V1.1.1)
TR 103 305-2-2018 CYBER; Critical Security Controls for Effective Cyber Defence; Part 2: Measurement and auditing (V2.1.1)

Professional Standard - Aerospace, The relationship between measurement and control

QJ 824-1984 Data Block Transmission in Computer Automatic Measurement and Control (CAMAC) Systems

CENELEC - European Committee for Electrotechnical Standardization, The relationship between measurement and control

CLC/TR 61158-1-2004 Digital data communications for measurement and control Fieldbus for use in industrial control systems Part 1: Overview and guidance for the IEC 61158 series
EN 62056-61:2002 Electricity Metering - Data Exchange for Meter Reading@ Tariff and Load Control Part 61: Object Identification System (OBIS)

Professional Standard - Electron, The relationship between measurement and control

SJ/Z 9107.3-1987 Operating conditions for industrial-process measurement and control equipment Part 3: Factors of mechanical influences
SJ/Z 9107.1-1987 Operating conditions for industrial-process measurement and control equipment Part 1: Temperature, humidity and atmospheric pressure

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., The relationship between measurement and control

IEEE 1588 INT 1-10-2009 A Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE 1588 INT 1-2005 A Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE P1588/D1.5-2019 Draft Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE N42.22-1995 American National Standard - Traceability of Radioactive Sources to the National Institute of Standards and Technology (NIST) and Associated Instrument Quality Control

IX-EU/EC, The relationship between measurement and control

80/766/EEC-1980 Commission Directive Laying Down the Community Method of Analysis for the Official Control of the Vinyl Chloride Monomer Level in Materials and Articles Which are Intended to Come into Contact with Foodstuffs

US-FCR, The relationship between measurement and control

FCR 21 CFR PART 106-2015 INFANT FORMULA REQUIREMENTS PERTAINING TO CURRENT GOOD MANUFACTURING PRACTICE, QUALITY CONTROL PROCEDURES, QUALITY FACTORS, RECORDS AND REPORTS, AND NOTIFICATIONS

VDI - Verein Deutscher Ingenieure, The relationship between measurement and control

VDI/VDE 2180 Blatt 6-1971 Sicherung von Anlagen der Verfahrenstechnik; Bauliche und installationstechnische Massnahmen zur Funktionssicherung von Mess-@ Steuer- und Regeleinrichtungen in Ausnahmezustaenden
VDI/VDE 2180 Blatt 5-1969 Sicherung von Anlagen der Verfahrenstechnik; Hilfsenergieversorgung der Einrichtungen zum Messen@ Steuern und Regeln

BE-NBN, The relationship between measurement and control

ES-UNE, The relationship between measurement and control

UNE-EN 61326-3-1:2017 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial app...
UNE-EN IEC 61326-3-2:2018 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial application...
UNE-EN IEC 62890:2020 Industrial-process measurement, control and automation - Life-cycle-management for systems and components (Endorsed by Asociación Española de Normalización in October of 2020.)

国家市场监督管理总局、中国国家标准化管理委员会, The relationship between measurement and control

GB/T 40919-2021 Polyethylene materials for piping systems—Determination of Strain Hardening Modulus in relation to slow crack growth

Taiwan Provincial Standard of the People's Republic of China, The relationship between measurement and control

CNS 14109-6-2002 Microfilming of technical drawings and other drawings office documents-Part6：Quality criteria and control of systems for enlargements from 35 mm microfilm.

中华人民共和国国家卫生和计划生育委员会, The relationship between measurement and control

GBZ 178-2006 Specification for radiological protection and quality control in implanted treatment of low energy γ-ray seed sources

PL-PKN, The relationship between measurement and control

PN T06530-1972 CAMAC A modular instrumentation system for automatic measurement and control Construction and logie organisation

IPC - Association Connecting Electronics Industries, The relationship between measurement and control

IPC TM-650 1.8 GUIDE-2003 Measurement Precision Calculator Users Guide For Use with Test Method 1.8@ Measurement Systems Analysis for Binary Data

SE-SIS, The relationship between measurement and control

SIS SS EN 50 010-1989 Low-voltage switchgear and controlgear for industrial use — Inductive proximity switches — Methods for measuring the operating distance and operating frequency

ZA-SANS, The relationship between measurement and control

SANS 62051-1:2005 Electricity metering - Data exchange for meter reading, tariff and load control - Glossary of terms Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM

Canadian Standards Association (CSA), The relationship between measurement and control

CSA IEC 61000-4-7-03-CAN/CSA:2003 Electromagnetic compatibility (EMC) Part 4-7: Testing and measurement techniques General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto First Edition; IEC 61000-4-7: 20

Group Standards of the People's Republic of China, The relationship between measurement and control

T/CRAAS 439.3-2022 General ventilation filters -- Part 3: Determination of gravimetric efficiency and resistance in relation to test dust holding capacity