ZH
RU
ES
Gas reference cell
Gas reference cell, Total:168 items.
In the international standard classification, Gas reference cell involves: Solar energy engineering, Equipment for petroleum and natural gas industries, Natural gas, Measurement of volume, mass, density, viscosity, Optoelectronics. Laser equipment, Metrology and measurement in general, Extraction and processing of petroleum and natural gas, Soil quality. Pedology, Hydraulic fluids, Analytical chemistry, Products of the chemical industry, Cereals, pulses and derived products, Welding, brazing and soldering, Paints and varnishes, Fuel cells, Domestic, commercial and industrial heating appliances, Galvanic cells and batteries, Materials and components for railway engineering, Particle size analysis. Sieving, Refractories, Valves, Burners. Boilers, Fluid power systems, Air quality, Quantities and units, Rubber and plastics products, Fuels, Petroleum, petroleum products and natural gas handling equipment, Power stations in general, Aircraft and space vehicles in general, Rubber, Ceramics, External sewage systems, Protection against dangerous goods, Linear and angular measurements, Fluid storage devices.
Korean Agency for Technology and Standards (KATS), Gas reference cell
International Organization for Standardization (ISO), Gas reference cell
- ISO 5024:1976 Petroleum liquids and gases; Measurement; Standard reference conditions
- ISO 13443:1996 Natural gas - Standard reference conditions
- ISO 13443:1996/Cor 1:1997 Natural gas - Standard reference conditions; Technical Corrigendum 1
- ISO 6711:1981 Gas analysis — Checking of calibration gas mixtures by a comparison method
- ISO 9277:2022 Determination of the specific surface area of solids by gas adsorption — BET method
- ISO 6143:1981 Gas analysis; Determination of composition of calibration gas mixtures; Comparison methods
- ISO 8130-2:1992 Coating powders; part 2: determination of density by gas comparison pyknometer (referee method)
- ISO 8130-2:2021 Coating powders - Part 2: Determination of density by gas comparison pycnometer (referee method)
- ISO 13226:2005 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
- ISO 6143:2001 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
- ISO/CD 6143 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
- ISO/DIS 6143:2023 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
- ISO 13226:1999 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Gas reference cell
- GB/T 17291-1998 Petroleum liquid and gas measurement--Standard reference conditions
- GB/T 19205-2003 Natural gas-standard reference conditions
- GB/T 19205-2008 Natural gas.Standard reference conditions
- GB/T 11059-2003 Crude oil--Determination of saturated vapour pressure--reference methods
- GB 10628-1989 Gas analysis－Determination of composition of calibration gas mixtures－Comparison methods
- GB/T 10628-1989 Gas analysis--Determination of composition of calibration gas mixtures—Comparison methods
- GB/T 5831-1986 Determination of trace oxygen in the gases--Colorimetric method
- GB/T 5831-2011 Determination of trace oxygen in the gases. Colorimetric method
- GB/T 42519-2023 Rubber—Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
- GB/T 28888-2012 Technical requirements of gas monitoring for sewer and septic tanks
- GB/T 21782.2-2008 Coating powders.Part 2: Determination of density by gas comparison pyknometer (referee method)
United States Navy, Gas reference cell
British Standards Institution (BSI), Gas reference cell
- BS EN ISO 13443:2005 Natural gas - Standard reference conditions
- BS EN ISO 13443:1997 Natural gas. Standard reference conditions
- BS EN ISO 8130-2:2010 Coating powders. Determination of density by gas comparison pyknometer (referee method)
- BS 5355:1976 Specification for filling ratios and developed pressures for liquefiable and permanent gases
- BS EN ISO 6143:2001 Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures
- BS EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
- BS EN ISO 8130-2:2021 Tracked Changes. Coating powders. Determination of density by gas comparison pyknometer (referee method)
- BS ISO 7181:1997 Hydraulic fluid power. Cylinders. Bore and rod area ratios
- BS EN 12067-2:2004 Gas/air ratio controls for gas burners and gas burning appliances - Electronic types
Standard Association of Australia （SAA）, Gas reference cell
- AS 2562:2005 Hydrometers - Portable syringe-type for lead-acid batteries
American Society for Testing and Materials (ASTM), Gas reference cell
- ASTM E948-15 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
- ASTM E948-05a Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
- ASTM E1040-05 Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells
- ASTM E1362-05 Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
- ASTM E1362-15 Standard Test Methods for Calibration of Non-Concentrator Photovoltaic Non-Primary Reference Cells
- ASTM D5550-94 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
- ASTM D5550-00 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
- ASTM E973-05a Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
- ASTM E973-05 Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
- ASTM E973-15 Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
- ASTM D5550-23 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
- ASTM D5550-06 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
- ASTM D5550-14 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
- ASTM C604-18 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
- ASTM C604-18(2023) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
- ASTM E1125-05 Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
- ASTM E1036-15 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
- ASTM E1039-99 Standard Test Method for Calibration of Silicon Non-Concentrator Photovoltaic Primary Reference Cells Under Global Irradiation (Withdrawn 2004)
- ASTM C604-02(2007) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
- ASTM C604-02 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
- ASTM C604-98 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
- ASTM C604-02(2007)e1 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
- ASTM E1125-10(2015) Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
Group Standards of the People's Republic of China, Gas reference cell
- T/CI 038-2021 The test method of mean specific heat capacity for lithium ion battery cell
American National Standards Institute （ANSI), Gas reference cell
- ANSI/ASTM E973M:1996 Test Method for Determination of the Spectral Mismatch Parameter between a Photovoltaic Device and a Photovoltaic Reference Cell (Metric)
Japanese Industrial Standards Committee (JISC), Gas reference cell
- JIS C 8943:2009 Indoor measuring method of output power for multi-junction solar cells and modules (Component reference cell method)
- JIS B 8393:2000 Pneumatic fluid power -- Standard reference atmosphere
- JIS K 0040:1990 Arsine (standard reference gas)
- JIS K 0041:1990 Phosphine (standard reference gas)
- JIS Z 8830:1990 Determination of the specific surface area of powders by gas adsorption methods
- JIS Z 8830:2013 Determination of the specific surface area of powders (solids) by gas adsorption -- BET method
- JIS Z 8830 ERRATUM 1:2002 Determination of the specific surface area of powders (solids) by gas adsorption method (Erratum 1)
- JIS Z 8837:2018 Determination of density by volumetric displacement -- Skeleton density by gas pycnometry
YU-JUS, Gas reference cell
- JUS H.F8.125-1986 Gases. Determination of oxygen content Colorimetric method
- JUS H.F8.402-1990 Gas analysis. Deteralnation of composition of calibration gas mixtures. Comparlstm methods
- JUS L.N1.046-1991 Ey?raulic fluid pofter. CylJoders. Bore and rod area ratios
Association Francaise de Normalisation, Gas reference cell
- NF EN ISO 8130-2:2021 Poudres pour revêtement - Partie 2 : détermination de la masse volumique à l'aide d'un pycnomètre à gaz (méthode de référence)
- NF X20-307:1977 Gas analysis by colorimetry.
- NF V03-719:1996 Cereals. Determination of bulk density, called "mass per hectolitre".
- NF C56-465:2009 Gas appliances - Fuel cell gas heating appliance - Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW.
- NF X20-304:1974 GAS ANALYSIS BY A CONTINUOUS COULOMETRIC METHOD.
- NF X20-207:1982 Gas analysis. Determination of composition of calibration gas mixtures. Comparison methods.
- NF F64-018:1990 Railway rolling stock. Electric accumulators. Vented nickel-cadmium secondary single cells.
- NF E49-301*NF ISO 8778:2018 Pneumatic fluid power - Standard reference atmosphere
- NF X20-220:1981 Analysis of gases. Checking of calibration gas mixtures by a comparison method.
- NF T46-046:2011 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers.
- NF X20-207*NF EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
- NF EN ISO 6143:2006 Analyse des gaz - Méthodes comparatives pour la détermination et la vérification de la composition des mélanges de gaz pour étalonnage
- NF X11-620:1996 Determination of the specific surface area of solids by gas adsorption using the bet method.
- NF X20-354:1975 Gas analysis - Determination of sulphur dioxide by continuous coulometric method.
- NF EN 13385:2002 Bouteilles à gaz transportables - Véhicules-batteries, pour gaz permanents et liquéfiés (sauf acétylène) - Contrôle au moment du remplissage
Society of Automotive Engineers (SAE), Gas reference cell
PL-PKN, Gas reference cell
Taiwan Provincial Standard of the People's Republic of China, Gas reference cell
- CNS 2705-1971 Method for Determination of Specific Gravity of Gas Fuels
- CNS 11027-1984 Definitions of Terms Relating to Density and Specific Gravity of Solids Liquids and Gases
- CNS 14389-1999 Methods of measuring for specific surface area of fine ceramic powders by gas adsorption
BELST, Gas reference cell
- STB 1643-2009 High bit rate Digital Subscriber Line. Norms of electric parameters
- STB 1645-2009 Symmetrical single pair high bit rate digital subscriber line. Norms of electric parameters
Professional Standard - Machinery, Gas reference cell
- JB/T 8806-1998 Mixer for mixed gas intended to be used in gas shielded arc welding. Technical specification
- JB/T 6859-1993 Basic parameters of gas lasers
RU-GOST R, Gas reference cell
- GOST 17310-2002 Gases. Picknometric method for determination of density
- GOST 17310-1986 Gases. Picknometric method for determination of density
- GOST ISO 8130.2-2002 Coating powders. Determination of density by gas comparison pyknometer (referee method)
- GOST 19328-1981 Aircraft and helicopter sealed fluid and gas filling. Parameters
- GOST 10062-1975 Natural combustible gases. Method for determination of specific heat of combustion
SE-SIS, Gas reference cell
German Institute for Standardization, Gas reference cell
- DIN EN ISO 13443:2007 Natural gas - Standard reference conditions (ISO 13443:1996, including Corrigendum 1:1997); English version of DIN EN ISO 13443:2007-09
- DIN ISO 9277:2014-01 Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)
- DIN 66137-2:2004 Determination of solid state density - Part 2: Gaspycnometry
- DIN EN ISO 6143:2006-11 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001); German version EN ISO 6143:2006
- DIN 51913:2013-05 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
- DIN 9020-3:1983-10 Aerospace; mass breakdown for aircraft heavier than air; group mass statement
International Telecommunication Union (ITU), Gas reference cell
ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Gas reference cell
CZ-CSN, Gas reference cell
- CSN 38 5553-1988 Checking of calibration gas mixture proportion by a comparative method
- CSN 38 5552-1987 Gaseous fuels Determination of composition of calibration gas mixture by comparison method
PT-IPQ, Gas reference cell
RO-ASRO, Gas reference cell
KR-KS, Gas reference cell
Association of German Mechanical Engineers, Gas reference cell
- VDI 3490 Blatt 5-1980 Measurement of gases; determination of the composition of calibration gas mixtures by comparison methods
US-FCR, Gas reference cell
Professional Standard - Light Industry, Gas reference cell
- QB/T 4415-2012 Flexible anerobic digesters of polyvinyl chloride coated fabrics
- QB/T 4396-2012 Polyvinyl chloride coated fabrics for flexible anerobic digesters
国家能源局, Gas reference cell
BE-NBN, Gas reference cell
Professional Standard - Electricity, Gas reference cell
- DL/T 1985-2019 Detection method of mixing ratio of sulfur hexafluoride mixed insulating gas
European Committee for Standardization (CEN), Gas reference cell
- EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
- EN ISO 13443:2005 Natural Gas - Standard Reference Conditions
- EN ISO 8130-2:2021 Coating powders - Part 2: Determination of density by gas comparison pycnometer (referee method) (ISO 8130-2:2021)
- EN ISO 8130-2:2010 Coating powders - Part 2: Determination of density by gas comparison pyknometer (referee method)
- EN 13385:2002 Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling
National Metrological Verification Regulations of the People's Republic of China, Gas reference cell
- JJG 945-1999 Verification Regulation of Gas O<下标2> Analyzer with Galvanic Cell
Danish Standards Foundation, Gas reference cell
- DS/EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
- DS/EN ISO 8130-2:2011 Coating powders - Part 2: Determination of density by gas comparison pyknometer (referee method)
- DS/ISO 8130-2:2021 Coating powders – Part 2: Determination of density by gas comparison pycnometer (referee method)
未注明发布机构, Gas reference cell
- BS EN ISO 6143:2006(2007) Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
ESDU - Engineering Sciences Data Unit, Gas reference cell
- AERO 00.01.08 A-1982 Specific heat capacities and their ratio as functions of temperature for several common gases.
- ESDU 99005 A-2003 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: inorganic gases.
- AERO 00.01.09 A-1975 A simple model of a thermally perfect@ calorically imperfect diatomic gas. Comparison with real gases.
Professional Standard - Electron, Gas reference cell
Professional Standard - Urban Construction, Gas reference cell
- CJ/T 360-2010 Technical requirements of gas monitoring for sewer and septic tanks
IT-UNI, Gas reference cell
- UNI EN ISO 8130-2:2021 Coating powders - Part 2: Determination of density by gas comparison pyknometer (referee method)
ES-UNE, Gas reference cell
- UNE-EN ISO 8130-2:2022 Coating powders - Part 2: Determination of density by gas comparison pycnometer (referee method) (ISO 8130-2:2021)
AENOR, Gas reference cell
- UNE-ISO 9277:2009 Determination of the specific surface area of solids by gas adsorption using the BET method
National Aeronautics and Space Administration (NASA), Gas reference cell
- NASA-TR-R-171-1967 The correlation of oblique shock parameters for ratios of specific heats from 1 to 5/3 with application to real gas flows
国家市场监督管理总局、中国国家标准化管理委员会, Gas reference cell
- GB/T 39713-2020 Testing mothed for specific surface area of ceramic powders—BET gas adsorption operation