ZH
RU
ES

three standard deviations

three standard deviations, Total:500 items.

In the international standard classification, three standard deviations involves: Iron and steel products, Materials for aerospace construction, Transformers. Reactors, Cereals, pulses and derived products, Optics and optical measurements, Quality, Optical equipment, Protection of and in buildings, Terminology (principles and coordination), Electronic tubes, Radiation measurements, Textile fibres, Products of the textile industry, Farming and forestry, Bottles. Pots. Jars, Road vehicle systems, Food products in general, Petroleum, petroleum products and natural gas handling equipment, Machine tools, Metrology and measurement in general, Organic chemicals, Linear and angular measurements, Astronomy. Geodesy. Geography, Meat, meat products and other animal produce, Audio, video and audiovisual engineering, Products of non-ferrous metals, Rotating machinery, Flexible drives and transmissions, Test conditions and procedures in general, Thermodynamics and temperature measurements, Non-ferrous metals, Corrosion of metals, Road engineering, Construction materials, Applications of information technology, Rubber and plastics products, Water quality, Vocabularies, Computer graphics, Education, Wastes, Screw threads, Quantities and units, Aerospace electric equipment and systems, Lubricants, industrial oils and related products, Welding, brazing and soldering, Telecontrol. Telemetering, Protection against fire, Construction industry, Civil engineering in general, Tyres, Cutting tools, Analytical chemistry, Air quality, Technical drawings, Machine tool systems, Electric filters, Standardization. General rules, Services, Adhesives, Components for electrical equipment, Passenger cars. Caravans and light trailers.

National Metrological Technical Specifications of the People's Republic of China, three standard deviations

JJF 2001-2022 Calibration Specification for Triple-frequency Generators

Institute of Electrical and Electronics Engineers (IEEE), three standard deviations

NFPA (Fire) 11 Standard for Low-, Medium-, and High-Expansion Foam, 2021 Edition
IEEE Std 1541-2002(R2008) IEEE Standard for Prefixes for Binary Multiples
IEEE 1541-2021 IEEE Standard for Prefixes for Binary Multiples
IEEE Std 1541-2021 IEEE Standard for Prefixes for Binary Multiples
IEEE Std 1541-2002 (R2008) IEEE Standard for Prefixes for Binary Multiples
IEEE Std 1541-2021 - Redline IEEE Standard for Prefixes for Binary Multiples - Redline
IEEE P1541/D8, August 2021 IEEE Draft Standard for Prefixes for Binary Multiples
IEEE P1541/D10, October 2021 IEEE Approved Draft Standard for Prefixes for Binary Multiples
IEEE P1541/D4, May 2018 IEEE Draft Standard for Prefixes for Binary Multiples
IEEE P1541/D9, September 2021 IEEE Draft Standard for Prefixes for Binary Multiples
IEEE P1541/D7, July 2021 IEEE Draft Standard for Prefixes for Binary Multiples
IEC 62843:2013(E) IEEE Std C37.94-2002 Standard for N times 64 kilobit per second optical fiber interfaces between teleprotection and multiplexer equipment
IEEE 1857.10-2021 IEEE Standard for Third-Generation Video Coding
IEEE P1857.10/D4, August 2021 IEEE Approved Draft Standard for Third Generation Video Coding
IEEE Std C37.94-2013
IEC 62843:2013*IEEE Std C37.94:2002 Standard for N times 64 kilobit per second optical fiber interfaces between teleprotection and multiplexer equipment
IEEE/IEC 62843-2013 Standard for N times 64 kilobit per second optical fiber interfaces between teleprotection and multiplexer equipment
IEEE Std C37.94-2017 IEEE Standard for N times 64 kbps Optical Fiber Interfaces between Teleprotection and Multiplexer Equipment
ST 2066:2012 ST 2066:2012 - SMPTE Standard - Disparity Map Representation for Stereoscopic 3D
IEEE P1857.10/D3, August 2021 IEEE Draft Standard for Third Generation Video Coding
IEEE P1857.10/D2, June 2021 IEEE Draft Standard for Third Generation Video Coding
SMPTE ST 2066:2012 ST 2066:2012 - SMPTE Standard - Disparity Map Representation for Stereoscopic 3D

National Fire Protection Association (NFPA), three standard deviations

NFPA 11-2021 Standard for Low-, Medium-, and High-Expansion Foam (Effective Date: 11/22/2020)
NFPA 11 AMD 1-2020 Standard for Low-, Medium-, and High-Expansion Foam (Effective Date: 12/23/2020)
NFPA 1-2021 Standard for Low-, Medium-, and High-Expansion Foam (Effective Date: 12/23/2020)
NFPA 1-2021 AMD 4 Standard for Low-, Medium-, and High-Expansion Foam (Effective Date: 12/23/2020)
NFPA 11-2016 CORR Standard for Low-, Medium-, and High-Expansion Foam (Effective Date: 12/23/2020)
NFPA 1-2021 AMD 3 Standard for Low-, Medium-, and High-Expansion Foam (Effective Date: 12/23/2020)
NFPA 1-2021 AMD 1 Standard for Low-, Medium-, and High-Expansion Foam (Effective Date: 12/23/2020)
NFPA 1-2021 AMD 2 Standard for Low-, Medium-, and High-Expansion Foam (Effective Date: 12/23/2020)
NFPA 11-2016 Standard for Low-, Medium-, and High-Expansion Foam (Effective Date: 09/07/2015; ALERT: THIS STANDARD HAS BEEN MODIFIED BY A TIA OR ERRATA)

National Metrological Verification Regulations of the People's Republic of China, three standard deviations

JJG(航天) 24-1987 Frequency difference multiplier (frequency standard comparator) Verification regulations
JJG 71-2005 Standard Metallic Scale (Grade Ⅲ)
JJG 59-1990 Standard Piston Gauge (Grade Ⅱ& Ⅲ)
JJG 239-1994 Standard Piston Pressurevacuum Gauge (Grade Ⅱ & Ⅲ)
JJG 71-1991 Verification Regulation of Standard Metallic Scale(GradeIII)
JJG 532-1988 Verification Regulation of Waveguide Standard Load at X-band

FI-SFS, three standard deviations

SFS 5231-1986

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, three standard deviations

GB/T 14999.5-1994 Photomicrographs and photomacrographs for evaluating of heat-resisting superalloys
GB 25586-2010 National Food Safety Standard Food Additive Sodium Sesquicarbonate (Concentrated Crystal Soda)
GB 1800-1979 Tolerance and fitting,generalities,standard tolerances and basic deviations
GB 4788-1994 Maximum residue limits of phorate,fenitrothion,and fenthion in foods
GB/T 1800.4-1999 Limits and fits Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 18916.3-2012(英文版) Norm of water intake—Part 3: Petroleum refining
GB/T 1800.3-1998 Limits and fits--Bases--Part 3: Numerical values tables of standard toleranes and fundamental deviations
GB 16236-1996 Health standard for cyclonite(RDX)in the of workplace
GB 18064-2000 Hygienic standard for diethylenetriamine in water sources
GB 16219-1996 Health standard for trichlormethane in the air of workplace
GB 11516-1989 Hygienic standard for phosphorus trichloride in the air of workplace
GB/T 19325-2003 Coated abrasive products--Dimensional tolerances on non-standard conversions

SE-SIS, three standard deviations

SIS SMS 1359-1950
SIS SMS 1486-1950
SIS SS IEC 462:1983 Nuclear instrumentation - Standard test procedures for photomultiplier tubes for scintillation counting
SIS SMS 1357-1950
SIS SMS 1488-1950
SIS SS 2090-1990 ISO system of limits and fits — Standard tolerances
SIS SMS 1338-1950
SIS SMS 1344-1950
SIS SMS 1487-1950

Military Standards (MIL-STD), three standard deviations

DOD A-A-54498-1991 BETAMETHASONE DIPROPIONATE CREAM, USP
DOD A-A-53868-1989 BETAMETHASONE BENZOATE GEL, USP

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, three standard deviations

JEDEC JESD212B.01-2013 GRAPHICS DOUBLE DATA RATE (GDDR5) SGRAM STANDARD
JEDEC JESD232-2015 GRAPHICS DOUBLE DATA RATE (GDDR5X) SGRAM STANDARD
JEDEC JESD212C-2016 GRAPHICS DOUBLE DATA RATE (GDDR5) SGRAM STANDARD
JEDEC JESD209A-2009 Low Power Double Data Rate (LPDDR) SDRAM Standard
JEDEC JESD209B-2010 Low Power Double Data Rate (LPDDR) SDRAM Standard

American National Standards Institute （ANSI), three standard deviations

ANSI/IEEE 111:2000 Standard for Wide Band (Greater than 1 Decade) Transformers
ANSI/ASA S1.11-1-2014*IEC 61260:1-2014 Electroacoustics û Octave-band and Fractional-octave-band Filters û Part 1: Specifications (a nationally adopted international standard)
ANSI H35.2-2013 Standard Dimensional Tolerances for Aluminum Mill Products
ANSI H35.2M-2013 Standard Dimensional Tolerances for Aluminum Mill Products
ANSI/IEEE 398:1972 Standard Test Procedures for Photo-Multipliers for Scintillation Counting and Glossary for Scintillation Counting Field

Group Standards of the People's Republic of China, three standard deviations

T/XHNCJLH 1202-2019 Xindong Xinhuang Galla Honey Circulation Standard
T/XHNCJLH 1201-2019 Xindong Xinhuang Galla Honey Breeding and Production Standards
T/WLJC 110-2022 Designof three-dimensional for Machine tool products General principles of tolerance dimensioning
T/SCQA 211-2021 Standard for urban road level difference planning and design
T/HAEC 004-2022 Third-party inspection service standards
T/GZEIIA 1001-2023 Three Classroom Software and Hardware Construction Standards
T/ZJGFTR 001-2021 Regenerated copper nitrate trihydrate product standard
T/CAB CSISA 0001-2018 Standardization third party evaluation—Basic terminology
T/CECS G：H11-02-2022 Real Scene Three-Dimensional Surveying Standard in Highway Reconnaissance
T/CNFAGS 2-2021 Discharge standard of melamine industrial pollutants

GM North America, three standard deviations

GM 9985036-1980 Oil Differential (Standard)
GM 9985055-1980 Oil Differential (Standard) SAE 80
GM 9985154-1996 Lubricant - Hypoid Gear, Standard Differential
GM 9985044-1996 Lubricant, Hypoid Gear, Standard Differential, 80W

Professional Standard - Agriculture, three standard deviations

1308兽药质量标准2017年版 Chinese Medicine Volume 1 Veterinary Drug Quality Standard Prescription Preparation and Single Herb Preparation Sanhua Rhubarb Galla Chinensis Powder
GB/T 1800-1979 General Tolerance and Fit Standard Tolerance and Basic Deviation
农业部1435号公告-35-2010 Compilation of National Standards for Veterinary Drugs (Volume 1) Gallic Chinese Medicine Powder
农业部1435号公告-10-2010 Compilation of National Standards for Veterinary Drugs (Volume 1) Traditional Chinese Medicine Rhubarb Galla Chinensis Powder
GBJ 4-1973 Industrial "three wastes" emission standards
142兽药质量标准汇编(2006至2011年)-2012 Domestic Veterinary Drug Standard Cefquinome Sulfate (Jiangsu Beikang Pharmaceutical Co., Ltd.)
1188兽药质量标准2017年版 Chinese Medicine Volume 1 Veterinary Drug Quality Standard Herbs and Decoction Pieces
农业部1759号公告-83-2012 Compilation of National Standards for Veterinary Drugs (Volume 3) Traditional Chinese Medicine Sanhuang Likang Powder
农业部1759号公告-85-2012 Compilation of National Standards for Veterinary Drugs (Volume 3) Traditional Chinese Medicine Sanhuang Shuangding Powder
农业部1759号公告-84-2012 Compilation of National Standards for Veterinary Drugs (Volume 3) Traditional Chinese Medicine Sanhuang Shuangding Tablets
143兽药质量标准汇编(2006至2011年)-2012 Domestic Veterinary Drug Standard Cefquinome Sulfate Injection (Jiangsu Beikang Pharmaceutical Co., Ltd.)
129兽药质量标准汇编(2006至2011年)-2012 Domestic veterinary drug standard trichloroisocyanuric acid, trisodium phosphate powder (for silkworm)
农业部1759号公告-86-2012 Compilation of National Standards for Veterinary Drugs (Volume 3) Chinese Medicine Sanhuangweng Oral Liquid
农业部1759号公告-82-2012 Compilation of National Standards for Veterinary Drugs (Volume 3) Traditional Chinese Medicine Sanhua Angelica Perfusion Solution
1324兽药质量标准2017年版 Chinese Medicine Volume 1 Veterinary Drug Quality Standard Prescription Preparation and Single Herb Preparation Sihua Gallnut Powder
农业部1759号公告-133-2012 Compilation of National Standards for Veterinary Drugs (Volume Three) Chemical Medicine Trichloroisocyanuric Acid Powder
NY/T 17-1985 Quality Standards for Repair of Three-stage V Type Compressor

IT-UNI, three standard deviations

PH-BPS, three standard deviations

PNS ASTM E1347:2021 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry

American Society for Testing and Materials (ASTM), three standard deviations

ASTM E1347-06(2015) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E766-14 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM E1347-06 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E1347-06(2011) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E1573-18 Standard Test Method for Measurement and Reporting of Masking Sound Levels Using A-Weighted and One-Third-Octave-Band Sound Pressure Levels
ASTM E1573-22 Standard Test Method for Measurement and Reporting of Masking Sound Levels Using A-Weighted and One-Third-Octave-Band Sound Pressure Levels
ASTM E1573-02 Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels
ASTM E1573-93(1998) Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels
ASTM E1951-98 Standard Guide for Calibrating Reticles and Light Microscope Magnifications
ASTM E1951-02 Standard Guide for Calibrating Reticles and Light Microscope Magnifications
ASTM E1951-01 Standard Guide for Calibrating Reticles and Light Microscope Magnifications
ASTM E1951-14(2019) Standard Guide for Calibrating Reticles and Light Microscope Magnifications
ASTM E1347-06(2020) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E766-14(2019) Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM E1347-03 Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry
ASTM E766-14e1 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM D3887-96(2004) Standard Specification for Tolerances for Knitted Fabrics
ASTM D3887-96 Standard Specification for Tolerances for Knitted Fabrics
ASTM D3887-96(2008) Standard Specification for Tolerances for Knitted Fabrics
ASTM D5248-04(2010) Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
ASTM D5248-96(2000) Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
ASTM D5248-04 Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
ASTM D5248-96 Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
ASTM D3444-00(2020) Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM D5248-04(2015) Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
ASTM D5248-04(2020) Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
ASTM D3444-00(2015) Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM F2717-14(2019) Standard Guide for Development of an Independent Third-Party Verification of Reference Materials
ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM D2244-23 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM G158-98(2004) Standard Guide for Three Methods of Assessing Buried Steel Tanks
ASTM D3443-00(2005) Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D3443-00 Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D3443-00(2010) Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D3444-00(2010)e1 Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM D3448-85(2000) Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
ASTM D3443-00(2020) Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D3448-10(2020) Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
ASTM D3443-00(2015) Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D2644-02(2007) Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2911-94 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2644-81(1996)e1 Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2644-02 Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2644-12 Standard Tolerances for Yarns Spun on the Woolen System
ASTM E2164-08 Standard Test Method for Directional Difference Test
ASTM D4695-03(2015) Standard Guide for General Pavement Deflection Measurements
ASTM D4695-03(2020) Standard Guide for General Pavement Deflection Measurements
ASTM D2644-12(2018) Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2911/D2911M-16(2023) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E2862-18 Standard Practice for Probability of Detection Analysis for Hit/Miss Data
ASTM D2244-09a Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-93(2000) Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
ASTM D2244-21 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-22 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-15e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-07e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-09 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D4221-11 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
ASTM D3444-00 Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM D3444-00(2005) Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM D2244-07 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-09b Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-11 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D3595-97 Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
ASTM E2544-07 Standard Terminology for Three-Dimensional (3-D) Imaging Systems
ASTM E2544-07a Standard Terminology for Three-Dimensional (3-D) Imaging Systems
ASTM D5616-00 Standard Specification for Reclaimed Trichloroethylene
ASTM A1-00 Standard Specification for Carbon Steel Tee Rails
ASTM D5616-04 Standard Specification for Reclaimed Trichloroethylene
ASTM E1750-95 Standard Guide for Use of Water Triple Point Cells
ASTM D5616-04(2010) Standard Specification for Reclaimed Trichloroethylene
ASTM D3595-14(2019) Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
ASTM E2544-11a Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM D3595-14(2019)e1 Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
ASTM D5616-04(2022) Standard Specification for Reclaimed Trichloroethylene
ASTM A1-00(2018) Standard Specification for Carbon Steel Tee Rails
ASTM E1750-02 Standard Guide for Use of Water Triple Point Cells
ASTM E1750-09 Standard Guide for Use of Water Triple Point Cells
ASTM E1750-10 Standard Guide for Use of Water Triple Point Cells
ASTM D5616-04(2016) Standard Specification for Reclaimed Trichloroethylene
ASTM D2911-94(2005) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911-94(2001) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM E2164-01(2007) Standard Test Method for Directional Difference Test
ASTM E2164-16 Standard Test Method for Directional Difference Test
ASTM D2911/D2911M-16 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM E520-08(2023) Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
ASTM D3443-00(2010)e1 Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM E3040-15 Standard Test Method for Evaluation of Instrumental Color Difference with a Gray Scale
ASTM D2616-12 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
ASTM D5770-02 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
ASTM D5770-96 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
ASTM D5770-02(2007) Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
ASTM E520-08(2015)e1 Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
ASTM E2544-09 Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM E2544-09a Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM E2544-09b Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM E2544-08 Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM E2544-08a Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM E2544-08b Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM D6126-11 Standard Specification for HFC-23 (Trifluoromethane, CHF₃)
ASTM D5632-95 Standard Specification for Halon 1301, Bromotrifluoromethane (CF₃Br)
ASTM D5632-01 Standard Specification for Halon 1301, Bromotrifluoromethane (CF₃Br)
ASTM E2544-10 Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM E2544-11a(2019) Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM E2544-11 Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM E1750-10(2016) Standard Guide for Use of Water Triple Point Cells
ASTM E2544-11A(2019)e1 Standard Terminology for Three-Dimensional (3D) Imaging Systems
ASTM D6126/D6126M-11e1 Standard Specification for HFC-23 (Trifluoromethane, CHF₃)
ASTM D6126/D6126M-11(2015) Standard Specification for HFC-23 (Trifluoromethane, CHF3)
ASTM D2244-15 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-15a Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-16 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D1464-90(2002) Standard Test Method for Differential Dyeing Behavior of Cotton
ASTM D1464-07 Standard Test Method for Differential Dyeing Behavior of Cotton
ASTM E1684-00 Standard Specification for Miniature Thermocouple Connectors
ASTM D2911-10 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D1464-12 Standard Practice for Differential Dyeing Behavior of Cotton
ASTM E2164-01 Standard Test Method for Directional Difference Test
ASTM E968-02(2008) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
ASTM E2603-15 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
ASTM E520-98 Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
ASTM E520-98(2003) Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
ASTM D5394-02(2007) Standard Specification for Reclaimed 1,1,1-Trichloroethane
ASTM D5394-02 Standard Specification for Reclaimed 1,1,1-Trichloroethane
ASTM D5394-97 Standard Specification for Reclaimed 1,1,1-Trichloroethane
ASTM E1555-20 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
ASTM F1110-09(2020) Standard Test Method for Sandwich Corrosion Test
ASTM D1464-90(1996) Standard Test Method for Differential Dyeing Behavior of Cotton
ASTM D2497-95 Standard Tolerances for Man-Made Organic-Base Filament Single Yarns
ASTM D2497-01 Standard Tolerances for Man-Made Organic-Base Filament Single Yarns
ASTM D2497-07 Standard Tolerances for Manufactured Organic-Base Filament Single Yarns
ASTM D2497-07(2012) Standard Tolerances for Manufactured Organic-Base Filament Single Yarns
ASTM D1464-12(2019) Standard Practice for Differential Dyeing Behavior of Cotton
ASTM D2497-07(2018) Standard Tolerances for Manufactured Organic-Base Filament Single Yarns
ASTM D249-89(1996) Standard tolerances for manufactured organic-based filament single yarns
ASTM E968-02 Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
ASTM E968-02(2014) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters

British Standards Institution (BSI), three standard deviations

BS ISO 17258:2015 Statistical methods. Six Sigma. Basic criteria underlying benchmarking for Six Sigma in organisations
BS EN 15904:2010 Glass packaging. Standard tolerances for flaconnage
BS ISO 9058:2008 Glass containers - Standard tolerances for bottles
BS ISO 12818:2013 Glass packaging. Standard tolerances for flaconnage
BS EN ISO 12818:2015 Glass packaging. Standard tolerances for flaconnage
PD CEN/TR 17982:2023 European Digital Identity Wallets standards Gap Analysis
BS EN 722-1:2004 Leisure accommodation vehicles-Liquid fuel heating systems-Part 1:Caravans and caravan holiday homes

Acoustical Society of America (ASA), three standard deviations

ASA S1.11 PART 1-2014 American National Standard Electroacoustics - Octave-band and Fractional-octave-band Filters - Part 1: Specifications (a nationally adopted international standard)

Professional Standard - Ferrous Metallurgy, three standard deviations

YB/T 4093-1993 Longitudinal low-magnification microstructure standard of GH4133B alloy disc forging
YB 4093-1993 Longitudinal low-magnification microstructure standard of GH4133B alloy disc forging

Yunnan Provincial Standard of the People's Republic of China, three standard deviations

DB53/ 055.4-1999 Wenshan Panax notoginseng comprehensive standard Panax notoginseng flower quality standard
DB53/ 055.3-1999 Wenshan Panax notoginseng comprehensive standard Panax notoginseng seedling quality standard
DB53/ 055.1-1999 Quality Standard for Sanqi of Wenshan
DB53/ 055.8-1999 Wenshan Notoginseng Comprehensive Standard Notoginseng Pesticide Use Guidelines
DB53/ 055.6-1999 Quality Standard of Raw Sanqi Power
DB53/ 055.2-1999 Quality Standard of Sanqi Seed
DB53/ 055.5-1999 Quality Standard of Sanqi stem and leaf
DB53/ 055.7-1999 Quality Standard of Sanqi Section
DB53/T 055.14-1999 Wenshan Panax notoginseng comprehensive standard Panax notoginseng flower processing regulations
DB53/T 055.9-1999 Wenshan Panax notoginseng Comprehensive Standard Panax notoginseng Seedling Technical Specification
DB53/T 055.10-1999 Wenshan Panax notoginseng comprehensive standard Panax notoginseng cultivation technical specification
DB53/T 055.13-1999 Wenshan Panax notoginseng comprehensive standard Panax notoginseng stem and leaf processing regulations
DB53/T 055.12-1999 Wenshan Panax notoginseng comprehensive standard Panax notoginseng primary product processing rules
DB53/ 073-1999 Yuanjiang mango comprehensive standard three-year mango varieties

Association Francaise de Normalisation, three standard deviations

NF X06-060:1987 Applications de la statistique - Estimation d'une variance - (d'un écart-type).
NF H35-213:2011 Glass packaging - Standard tolerances for flaconnage.
NF H35-213*NF EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage
NF X06-061:1987 Applications de la statistique - Comparaison d'une variance (d'un écart-type) à une valeur donnée
NF X06-062:1987 Applications de la statistique - Estimation du rapport de deux variances - (deux écarts-types).
NF EN ISO 12818:2015 Emballages en verre - Tolérances standard pour flaconnage
CWA 15236:2005 Analysis of standardization requirements and standardization gaps for eProcurement in Europe
NF X02-006:1994 Fundamental standards. The international systems of units. Description and rules for use. Choice of multiples and sub-multiples.
NF X06-063:1987 Applications de la statistique - Comparaison du rapport de deux variances - (deux écarts-types) à une valeur donnée.
NF A89-211:1996 Destructive tests on welds in metallic materials. Macroscopic and microscopic examination of welds.
NF E75-079:1987 COATED ABRASIVE PRODUCTS. DIMENSIONAL TOLERANCES ON NON-STANDARD CONVERSIONS.
NF P97-401:1977 Lighting columns. Dimensions and tolerances.

AENOR, three standard deviations

UNE 66053:1978 ESTIMATION OF THE VARIANCE OR OF THE STANDARD DEVIATION OF A LOT
UNE 66055:1982 COMPARISON OF TWO VARIANCES OR TWO STANDARD DEVIATIONS
UNE 66056:1978 ESTIMATION OF THE RATIO OF TWO VARIANCES OR OF TWO STANDARD DEVIATIONS
UNE 66054:1978 COMPARISON OF THE VARIANCE OR OF THE STANDARD DEVIATION OF A LOT WITH A GIVEN VALUE
UNE-EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013)

Professional Standard - Electron, three standard deviations

SJ/Z 9012-1987 Standard test methods for photomultiplier tubes for scintillation counting
SJ/T 9507-1993 Grading standard of quality for television transposer
SJ/Z 9153.4-1987 Piezoelectric filter Part III： Standard outlines

International Electrotechnical Commission (IEC), three standard deviations

IEC 60462:1974 Standard test procedures for photomultiplier tubes for scintillation counting
IEC 62358:2012 Ferrite cores - Standard inductance factor for gapped cores and its tolerance

Korean Agency for Technology and Standards (KATS), three standard deviations

KS K 0046-2012 Standard tolerances for yarns spun on the cotton or worsted systems
KS K 0042-2017 Standard tolerances for knit goods
KS K 0042-1975 Standard tolerances for knit goods
KS K 0046-1976 Standard tolerances for yarns spun on the cotton or worsted systems
KS A 3254-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
KS A 3254-1987 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
KS A 3252-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
KS A 3255-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS A 3255-1987 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS A 3252-1985 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
KS K 0042-2011 Standard tolerances for knit goods
KS A 3252-1968(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
KS A 3253-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, TWO-SIDED)
KS A 3253-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, TWO-SIDED)
KS A 3254-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
KS A 3255-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS K 0042-2022 Standard specification for tolerances for knitted fabrics
KS K 0044-2022 Standard tolerances for yarn spun on the woolen system
KS K 0044-1986 Standard tolerances for yarn spun on the woolen system
KS K 0040-2019 Standard tolerances for manufactured organic-base man-made filament single yarns
KS K 0040-1975 Standard tolerances for manufactured organic-base man-made filament single yarns
KS K 0044-2016 Standard tolerances for yarn spun on the woolen system
KS K 0044-2011 Standard tolerances for yarn spun on the woolen system
KS K 0040-2011 Standard tolerances for manufactured organic-base man-made filament single yarns
KS K 0044-2016(2021) Standard tolerances for yarn spun on the woolen system
KS A 3262-1969(2001) INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
KS M ISO 4184:2002 Belt drives－Classical and narrow V－belts－Lengths in datum system
KS A 3262-2002 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
KS A 3262-1986 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
KS A 3256-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS KNOWN, ONE-SIDED)
KS A 3259-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS UNKNOWN, TWO-SIDED)
KS A 3263-2002 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEIVATIONS UNKNOWN)
KS A 3259-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS UNKNOWN, TWO-SIDED)
KS Q 0001-2010 Single sampling inspection plans by variables having desired operating characteristics(known standard deviation)
KS Q 0001-2013 Single sampling inspection plans by variables and attributes
KS B 0213-1974 Limits and Tolerances for Unified Coarse Screw Threads
KS B 0216-1974 Limits and Tolerances for Unified Fine Screw Threads
KS B 0507-1975(2011) Roughness Comparison Specimens
KS K 0045-2007 Standard tolerances for tire cords made from man-made fibers
KS K 0045-1982 Standard tolerances for tire cords made from man-made fibers
KS A 3258-1991(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN, ONE-SIDED)
KS A 3256-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS KNOWN, ONE-SIDED)
KS A 3260-2002 INTERVAL ESTIMATION OF THE POPULATION MEANS (STANDARD DEVIATION KNOWN)
KS A 3261-2002 INTERVAL ESTIMATION OF THE POPULATION MEANS (STANDARD DEVIATIONUNKNOWN)
KS A 3260-1986 INTERVAL ESTIMATION OF THE POPULATION MEANS (STANDARD DEVIATION KNOWN)
KS A 3257-1991(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE TWO POPULATION MEANS(STANDARD DEVIATIONS KNOWN, TWO-SIDED)
KS K 0046-2017 Standard tolerances for yarns spun on the cotton or worsted systems

HU-MSZT, three standard deviations

Japanese Industrial Standards Committee (JISC), three standard deviations

JIS Z 9042:1962 Significance test of difference between the population mean and the standard (standard deviation known, one-sided)
JIS Z 9043:1962 Significance test of difference between the population mean and the standard (standard deviation known, two-sided)
JIS Z 9044:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, one-sided)
JIS Z 9045:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, two-sided)
JIS Z 9046:1965 Significance test of difference between the two population means (standard deviations known, one-sided)
JIS Z 9047:1979 Significance test of difference between the two population means (standard deviations known, two-sided)
JIS Z 9048:1979 Significance test of difference between the two population means (standard deviations unknown, one-sided)
JIS Z 9049:1965 Significance test of difference between the two population means (standard deviations unknown, two-sided)
JIS B 0401-2:1998 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
JIS Z 9052:1963 Interval estimation of the difference between two population means (standard deviations known)
JIS Z 9053:1963 Interval estimation of the difference between two population means (standard deviations unknown)
JIS Z 9050:1963 Interval estimation of the population mean (standard deviation known)
JIS Z 9051:1963 Interval estimation of the population mean (standard deviation unknown)

ES-UNE, three standard deviations

UNE 66055:1983 ERRATUM COMPARISON OF TWO VARIANCES OR TWO STANDARD DEVIATIONS

CZ-CSN, three standard deviations

CSN ON 56 3052-1964
CSN ON 56 3028-1964
CSN 42 8387-1961 Platinum and platinum alloys sheets. Dimensional standard
CSN 42 8405-1983 Hot rolled copper wire
CSN 01 4203 Za-1990
CSN 24 1320-1984 Three-jaw drill chucks with key
CSN 33 0128-1984 Standard frequencies in tho range of 0,1 to 10000 Hz and their tolerances .
CSN 34 0033-1966 Standard frequencies in the range of 0,1 to 10 000 Hz and their tolerances

Professional Standard - Aviation, three standard deviations

HB/Z 210-1991 Low microstructure standard for turbojet engine turbine inner and outer shaft forgings
HB 4566-1992 Standard mold base for three-plate circular rubber die
HB 4567-1992 Three-plate rectangular rubber mold base

TH-TISI, three standard deviations

TIS 811-1988 Standard for automotive v-belts
TIS 569-1985 Standard for sodium tripolyphosphate for industrial use
TIS 377-1981 Standard for tolerances for bolts, screws, nuts and studs

API - American Petroleum Institute, three standard deviations

API STD 6-1927 RIG IRON STANDARDS (Third Edition)
API THIRD PARTY NETWORK-2007 Standard for Third Party Network Connectivity
API STD 1104-1955 STANDARD FOR FIELD WELDING OF PIPE LINES (Third Edition)
API STD 17F-2014 Standard for Subsea Production Control Systems (THIRD EDITION)

BR-ABNT, three standard deviations

U.S. Air Force, three standard deviations

AIR FORCE DI-TMSS-81641-2003 ALLOWANCE STANDARD CODE (ASC) UPDATE PACKAGE
AIR FORCE FIPS-PUB-185-1994 ESCROWED ENCRYPTION STANDARD (EES)

European Committee for Standardization (CEN), three standard deviations

EN 15904:2010 Glass packaging - Standard tolerances for flaconnage
CWA 15236-2005 Analysis of standardization requirements and standardization gaps for eProcurement in Europe
EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage
CEN/TR 17982:2023 European Digital Identity Wallets standards Gap Analysis

Society of Automotive Engineers (SAE), three standard deviations

SAE J1058-1999 Standard Sheet Steel Thickness and Tolerances
SAE AMS2204G-1994 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204E-1983 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204D-1973 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204F-2011 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AS1035D-1993 TEE, STANDARD AND REDUCER, FLARED TUBE
SAE MAM2204A-1994 TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
SAE MAM2204-1983 TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
SAE MAM2204B-1994 TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
SAE AS1035E-2007 FITTING, TEE, STANDARD AND REDUCER, FLARED
SAE AS1035C-2001 FITTING, TEE, STANDARD AND REDUCER, FLARED
SAE AS1035G-2020 FITTING, TEE, STANDARD AND REDUCER, FLARED
SAE AS4833-1995 Aircraft New Tire Standard - Bias and Radial
SAE AMS2204C-1966 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes
SAE AMS2204A-1960 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes
SAE AMS2204-1960 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes
SAE AS1005D-1992 TEE, STANDARD AND REDUCER, FLARELESS TUBE
SAE AS1005E-2000 TEE, STANDARD AND REDUCER, FLARELESS TUBE
SAE AS1005F-2005 FITTING, TEE, STANDARD AND REDUCER, FLARELESS
SAE J182-2020 Motor Vehicle Fiducial Marks and Three-Dimensional Reference System

PL-PKN, three standard deviations

PN M02155-1989 Round screw threads Tolerances for gauges
PN M02141-1986 Height and deph limit gauges Tolerances
PN M02158-1990 Trapezoidal multi - start screw threads Tolerances for gauges

SAE - SAE International, three standard deviations

SAE J1058-1991 Sheet Steel Thickness and Profile@ Recommended Practice
SAE J1058-1976 Sheet Steel Thickness and Profile
SAE J1058-2015 Sheet Steel Thickness and Profile
SAE AMS2204H-1996 Tolerances Aluminum Alloy Standard Structural Shapes
SAE AMS2204G-1989 Tolerances Aluminum Alloy Standard Structural Shapes
SAE MAM2204B-1989 Tolerances@ Metric Aluminum Alloy Standard Structural Shapes
SAE MAM2204C-1996 Tolerances@ Metric Aluminum Alloy Standard Structural Shapes
SAE AMS2204B-1964 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes

RO-ASRO, three standard deviations

STAS 6725-1968

UNKNOWN, three standard deviations

SH 0552-1993(合订本)

AASHTO - American Association of State Highway and Transportation Officials, three standard deviations

PS-1996 AASHTO Provisional Standards (Third Edition)

Professional Standard - Petrochemical Industry, three standard deviations

SH 0552~0564-1993 Petroleum Product Standard 1993 (3)

Taiwan Provincial Standard of the People's Republic of China, three standard deviations

CNS 8461-1983 Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Unknown One - Sided)
CNS 8460-1983 Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Known, Two - Sided)
CNS 8462-1983 Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Unknown ,Two -Sided)
CNS 8459-1983 Significance Test of Difference Between the Population Mean and the Standart (Standard Deviation Known ,One - Sided)
CNS 8550-1983 Significance Test of Differencece Between the Two Population Means(Standard Deviations Known, Two - Sided)
CNS 8879-1983 Interval Estimation of the Difference Between Two Population Means(Standard Deviations Known)
CNS 8549-1983 Significance Test of Difference Between the Two Population Means (Standard Deviations, Known, One-Side)
CNS 8746-1983 Significance Test of Difference Between the Two Population Means (Standard Deviations Unknown, Two-Sided)
CNS 8745-1983 Significance Test of Difference Between the Two Population Means(Standard Deviations Unknown, One-Sided)
CNS 8880-1983 Interval Estimation of the Difference Between Two Population Means (Standard Deviations Known)
CNS 5663-1986 Test Code for Accuracy of Three-Side Planers and Moulders
CNS 3-14-1994 Engineering Drawing (Geometrical Tolerancing - Datums and Datum - Systems)
CNS 3.14-1994 Engineering Drawing (Geometrical Tolerancing - Datums and Datum - Systems)
CNS 13221-1993 Methods of Indicating Conformity with Standards for Third - Party Certification Systems
CNS 8747-1983 Interval Estimation of the Population Mean(Standard Deviation Known)
CNS 8748-1983 Interval Estimation of the Population Mean(Standard Deviation Unknown)

CU-NC, three standard deviations

NC 16-13-1984 Basic Interchangeability Standards. Bevel and Hypoíd Gear Transmissions. Tolerances

International Organization for Standardization (ISO), three standard deviations

ISO 9058:2008 Glass containers - Standard tolerances for bottles
ISO 12818:2013 Glass packaging - Standard tolerances for flaconnage
ISO 8366:1987 Coated abrasive products; Dimensional tolerances on non-standard conversions

RU-GOST R, three standard deviations

GOST 8.381-1980 State system for ensuring the uniformity of measurements. Standards. The ways of expressing the errors
GOST 34038-2016 Glass packaging. Flacons. Standard tolerances from nominal dimensions
GOST R ISO 9058-2010 Glass containers. Bottles. Standard tolerances of nominal dimensions

AIAG - Automotive Industry Action Group, three standard deviations

B-9-2004 Gas Cylinder Identification Label Standard (Version 3)
B-2-2007 Vehicle Identification Number (VIN) Label Application Standard (Version 3)

Professional Standard - Surveying and Mapping, three standard deviations

CH 8004-1991 Standard metallic scale (Grade Ⅲ)

Underwriters Laboratories (UL), three standard deviations

UL 248W BULLETIN-2006 UL harmonized trinational set of standards
UL 1175-1999 UL Standard for Safety Buoyant Cushions (Third Edition)
UL 998-1993 UL Standard for Safety Humidifiers (Third Edition)
UL 1004-4-2018 UL Standard for Safety Electric Generators (Third Edition)
UL 1769-2003 UL Standard for Safety Cylinder Valves (Third Edition)
UL 198M-1995 UL Standard for Safety Mine-Duty Fuses (Third Edition)
UL 469-1997 UL Standard for Safety Musical Instruments and Accessories (Third Edition)
UL 150-1994 UL Standard for Safety Antenna Rotators (Third Edition)

IX-FAO, three standard deviations

CODEX STAN 3-1995 Codex standard for canned salmon

German Institute for Standardization, three standard deviations

DIN 7172:1991-04 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN EN ISO 12818:2015-08 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013); German version EN ISO 12818:2015
DIN 7172:1991 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN ISO 286-2:1990 ISO system of limits and fits; tables of standard tolerance grades and limit deviations for holes and shafts; identical with ISO 286-2:1988

国家市场监督管理总局、中国国家标准化管理委员会, three standard deviations

GB/T 37851-2019 Glass containers—Standard tolerances for flaconnage

Danish Standards Foundation, three standard deviations

DS/EN 15904:2011 Glass packaging - Standard tolerances for flaconnage
DS/ISO 9058:2008 Glass containers - Standard tolerances for bottles
DS/ISO 4184:1982 Classical and narrow V-belts. Lengths

Lithuanian Standards Office , three standard deviations

LST EN 15904-2011 Glass packaging - Standard tolerances for flaconnage
LST EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013)

Professional Standard - Machinery, three standard deviations

JB/T 8995.1-1999 Tolerances and fits for large-size of large electrical machines and hydraulic turbines.General standard tolerances and fundamental deviations
JB/T 10590-2006 Coated abrasive products-Dimensional tolerances on non-standard conversions
JB/T 10744-2007 Coated abrasive products.Dimensional tolerances on non-standard conversions

CN-STDBOOK, three standard deviations

图书 A-4647 Food Standards and Regulations (Third Edition)
图书 3-9065 Chemical Industry Standard Compilation of Rubber Raw Materials (3) (Third Edition)
图书 3-9848 Compilation of Textile Machinery Standards (Volume Three)
图书 3-9440 Compilation of Building Curtain Wall Standards (Third Edition) Volume 2
图书 3-9439 Compilation of Building Curtain Wall Standards (Third Edition) Volume 1

Professional Standard - Military and Civilian Products, three standard deviations

WJ 1266-1981 Dimensional tolerance of plastic parts (limited standard)
WJ 195-1994 Armored Vehicle Standard Parts Tee Pipe Joint

中华人民共和国国家卫生和计划生育委员会, three standard deviations

GB 18065-2000 Hygienic standard for triethylamine in water sources

BE-NBN, three standard deviations

NBN 492-1958

Hainan Provincial Standard of the People's Republic of China, three standard deviations

DB46/ 118-2008 Hygienic standard for raw-eaten aquatic products of Salmon and Lobster

Professional Standard - Light Industry, three standard deviations

QB/T 2267-1996 Tolerance and fit dimensions for timing instruments to 18mm insert standard tolerance values for intermediate tolerance classes

NL-NEN, three standard deviations

NEN 2890-1990 Derivation of target sizes from modular sizes of building elements

Aerospace, Security and Defence Industries Association of Europe (ASD), three standard deviations

ASD-STAN PREN 4434-2003 Aerospace Series Copper or Copper Alloy Lightweight Conductors for Electrical Cables Product Standard (Normal and tight tolerances) (Edition P 2)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., three standard deviations

IEEE 398-1972 Standard Test Procedures for Photomultipliers for Scintillation Counting and Glossary for Scintillation Counting Field

Professional Standard - Construction Industry, three standard deviations

JGJ 35-1987(第三部分) Standard for parameter of construction atmosphere (Part 3)

Yunnan Provincial Food Standard of the People's Republic of China, three standard deviations

DBS53/ 029-2020 Food safety local standard Panax notoginseng fibrous root

Standard Association of Australia （SAA）, three standard deviations

AS 1654.2:1995 ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts

ES-AENOR, three standard deviations

UNE 25 016

KR-KS, three standard deviations

KS K 0046-2017(2022) Standard tolerances for yarns spun on the cotton or worsted systems

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, three standard deviations

GB/T 34002-2017 Microbeam analysis—Analytical transmission electron microscopy—Methods for calibrating image magnification by using reference materials having periodic structures

VN-TCVN, three standard deviations

TCVN 2245-1999 ISO system of limits and fits.Tables of standard tolerance grades and limit deviations for holes and shafts
TCVN 4751-1989 Three-and four-roller sheet bending machines.Normes of accuracy

AT-ON, three standard deviations

ONORM ISO 286 Teil.2:1990 ISO System oflimits andfits; tables of Standard tolerance grades and limit deviations for holes and shafts

ANSI - American National Standards Institute, three standard deviations

X9.65-2004 Triple Data Encryption Algorithm (TDEA)@ Implementation Standard

Qinghai Provincial Standard of the People's Republic of China, three standard deviations

DB63/T 1629-2018 Guidelines for Standard System of Sanjiangyuan National Park

Anhui Provincial Standard of the People's Republic of China, three standard deviations

DB34/T 3959-2021 Technical standards for third-party evaluation of property services

Beijing Provincial Standard of the People's Republic of China, three standard deviations

DB11/ 051-2002 Three-phase asynchronous motor energy saving monitoring standard

ETSI - European Telecommunications Standards Institute, three standard deviations

TR 103 376-2016 SmartM2M; IoT LSP use cases and standards gaps (V1.1.1)

ACI - American Concrete Institute, three standard deviations

ACI 117-1990 Standard Specification for Tolerances for Concrete Construction and Materials
ACI 117/117R-1990 Standard Specification for Tolerances for Concrete Construction and Materials

The Aluminum Association, three standard deviations

AA H35.2-2013 American National Standard Dimensional Tolerances for Aluminum Mill Products

ISUZU - Isuzu Motors Ltd., three standard deviations

ISC-A140-2001 Standard Dimensions and Tolerance of Steel Materials; Best Copy Available