ZH
RU
ES

Frontiers of Metal Matrix Composites

Frontiers of Metal Matrix Composites, Total:252 items.

In the international standard classification, Frontiers of Metal Matrix Composites involves: Testing of metals, Non-ferrous metals, Vocabularies, Road vehicles in general, Aircraft and space vehicles in general, Products of non-ferrous metals, Construction materials, Elements of buildings, Products of the textile industry, Equipment for the metallurgical industry, Dentistry, Cellular materials, Pipeline components and pipelines, Materials for the reinforcement of composites, Electrical wires and cables, Printed circuits and boards, Reinforced plastics, Powder metallurgy, Shipbuilding and marine structures in general, Materials for aerospace construction, Medical equipment, Space systems and operations, Electrical accessories, Surface treatment and coating, Welding, brazing and soldering, Railway rolling stock, Bearings, Magnetic materials, Adhesives, Raw materials for rubber and plastics, Non-destructive testing.

SAE - SAE International, Frontiers of Metal Matrix Composites

SAE CMH-17-4B-2013 COMPOSITE MATERIALS HANDBOOK VOLUME 4 (METAL MATRIX COMPOSITES)
SAE AIR4844-1994 Composites and Metal Bonding Glossary
SAE AIR4844A-1997 Composites and Metal Bonding Glossary
SAE AIR4844C-2017 Composites and Metal Bonding Glossary

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Frontiers of Metal Matrix Composites

GB/T 34558-2017 Terminology for metal matrix composites

Korean Agency for Technology and Standards (KATS), Frontiers of Metal Matrix Composites

KS D 0052-1994 Glossery of terms used in metal matrix composites
KS D 0052-1994(2019) Glossery of terms used in metal matrix composites
KS P ISO 16744:2005 Dentistry－Base metal materials for fixed dental restorations
KS P ISO 16744:2010 Dentistry－Base metal materials for fixed dental restorations
KS C 2117-1996 Testing method for complex dielectric constant of nonmetallic magnetic materials at high frequencies
KS B ISO 15611:2018 Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience
KS B ISO TR 17671-5:2016 Welding — Recommendations for welding of metallic materials — Part 5:Welding of clad steels
KS B ISO TR 17671-5-2016(2021) Welding — Recommendations for welding of metallic materials — Part 5:Welding of clad steels
KS C IEC 61035-2-3-2003(2008) Specification for conduit fittings for electrical installations－Part 2：Particular specifications－Section 3：Fittings for flexible conduits of metal, insulating or composite materials and for pliable co
KS B ISO 15610:2003 Specification and qualification of welding procedures for metallic materials－Qualification based on tested welding consumables
KS D ISO 4498-1-2001(2006) Sintered metal materials, excluding hardmetals-Determination of apparent hardness－Part 1：Materials of essentially uniform section hardness
KS M ISO 11124-4:2019 Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 4: Low-carbon cast-steel shot
KS B ISO 7905-3:2007 Plain bearings－Bearing fatigue－Part 3：Test on plain strips of a metallic multilayer bearing material
KS M ISO 11124-3:2019 Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 3: High-carbon cast-steel shot and grit
KS M ISO 11127-5-2013(2018) Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives-Part 5: Determination of moisture
KS C IEC 60614-2-6:2003 Specification for conduits for electrical installations-Part 2:Particular specifications for conduits-Section 6:Pliable conduits of metal or composite materials
KS B ISO 7905-4:2007 Plain bearings－Bearing fatigue－Part 4：Tests on half-bearings of a metallic multilayer bearing material
KS C IEC 60614-2-6:2014 Specification for conduits for electrical installations－Part 2：Particular specifications for conduits－Section 6：Pliable conduits of metal or composite materials

GM North America, Frontiers of Metal Matrix Composites

GM GM6415M-1997 Aluminum Metal Matrix Composite Tubing

The Aluminum Association, Frontiers of Metal Matrix Composites

AA H35.5-2003 Nomenclature System for Aluminum Metal Matrix Composite Materials
AA ANSI H35.5-2013 Nomenclature System for Aluminum Metal Matrix Composite Materials

RU-GOST R, Frontiers of Metal Matrix Composites

GOST R 56656-2015 Metal composites. Method for determination of tensile properties of fiber reinforced metal matrix composites
GOST R 56682-2015 Polymer and metal composites. Method for determination the volume of matrix, reinforce filler and voids
GOST 25698-1998 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Materials of essentially uniform section hardness
GOST 25698-1983 Powder articles. Methods of determination of hardness
GOST R 56467-2015 Space systems. Powder metal and metal composite materials. Classification. Nomenclature of indices
GOST R 56465-2015 Space systems. Nonmetallic materials based on ceramic-matrix and carbon-carbon composites used as rocket engine thrusters parts (orientation and correction pulse). Classification. Nomenclature of indices
GOST R ISO 15613-2009 Specification and qualification of welding procedures for metallic materials. Qualification based on pre-production welding test
PNST 534-2021 Space systems. Carbon-carbon and ceramic matrix composites. Classification and list of properties
GOST R 51736-2001 Dental ceramic fused to metal restorative materials. Technical requirements. Test methods
GOST 31575-2012 Dental ceramic fused to metal restorative materials. Technical requirements. Test methods
GOST R ISO 15610-2009 Specification and qualification of welding procedures for metallic materials. Qualification based on tested welding consumables

Japanese Industrial Standards Committee (JISC), Frontiers of Metal Matrix Composites

JIS H 7006:1991 Glossary of terms used in metal matrix composites
JIS T 6121:2013 Base metal materials for dental metal-ceramic restorations
JIS T 6123:2005 Base metal materials for fixed dental restorations
JIS T 6123:2013 Base metal materials for fixed dental restorations
JIS H 7401:1993 Test method for volume fraction of fiber in metal matrix composites

Group Standards of the People's Republic of China, Frontiers of Metal Matrix Composites

T/CSAE 171-2020 Test methodsfor mechanical properties of adhesively bonded joints for automotive polymer matrix composites—Composite/metal
T/GDAC 1-2018 Metal and metal composite ceiling panels
T/CHBAS 29-2023 Bimetal composite wear-resistant material casting
T/CECS 10035-2019 Assessment standard for green building materials - metal composite decorative materials

U.S. Military Regulations and Norms, Frontiers of Metal Matrix Composites

ARMY MIL-HDBK-17-4 A-2002 COMPOSITE MATERIALS HANDBOOK VOLUME 4. METAL MATRIX COMPOSITES

WRC - Welding Research Council, Frontiers of Metal Matrix Composites

BULLETIN 207-1975 JOINING OF METAL-MATRIX FIBER-REINFORCED COMPOSITE MATERIALS

American National Standards Institute （ANSI), Frontiers of Metal Matrix Composites

ANSI H35.5-1993 Nomenclature System for Aluminum Metal Matrix Composite Materials
ANSI H35.5-2013 Standard Nomenclature System for Aluminum Metal Matrix Composites
ANSI/IPC CF-152-1994 Composite Metallic Materials - Specification for Printed Wiring Boards
ANSI/ASTM A893:1997 Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies

American Welding Society (AWS), Frontiers of Metal Matrix Composites

WRC 207:1975 Joining of Metal-Matrix Fiber-Reinforced Composite Materials

Professional Standard - Building Materials, Frontiers of Metal Matrix Composites

JC/T 1059-2007 Metal and metal-composite ceilings
JC/T 2229-2014 Method for atmospheric corrosion tests on metal and metal-composite product on architecture

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Frontiers of Metal Matrix Composites

GB/T 23444-2009 Metal and metal-composite ceilings
GB/T 32498-2016 Metal matrix composites.Tensile testing.Method of test at ambient temperature
GB/T 30599-2014 In situ particulate reinforced ZL101A alloy matrix composites
GB/T 41739-2022 Test method for dimensional stability of metal matrix composites—Thermal-cold cycling method
GB/T 32496-2016 Test method for volume fraction of reinforcement in metal matrix composites.Image analysis method
GB/T 9097.1-2002 Sintered metal materials,excluding hardmetals--Determination of apparent hardness Part 1: Materials of essentially uniform section hardness

Military Standard of the People's Republic of China-General Armament Department, Frontiers of Metal Matrix Composites

GJB 10305-2021 Specification for spray metallic coatings for resin matrix composites
GJB 10107-2021 Specification for high-pressure gas cylinders made of metal-lined filament-wound composites

Professional Standard - Textile, Frontiers of Metal Matrix Composites

FZ/T 64002-2011 Composed thermal insulation material. Wadding composed of coated metal film
FZ/T 64002-2021 Composite thermal insulation material Metal-coated composite flakes

KR-KS, Frontiers of Metal Matrix Composites

KS P ISO 16744-2005 Dentistry－Base metal materials for fixed dental restorations
KS B ISO 7005-3-2008(2023) Metallic flanges－Part 3：Copper alloy and composite flanges
KS B ISO 15611-2018 Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience
KS M ISO 11124-4-2019 Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 4: Low-carbon cast-steel shot
KS M ISO 11124-3-2019 Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 3: High-carbon cast-steel shot and grit

American Society for Testing and Materials (ASTM), Frontiers of Metal Matrix Composites

ASTM D3552-96(2002) Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM B976-21 Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors Aluminum Matrix Composite Reinforced (ACAMCR) (formerly known as ACCR)
ASTM D3552-17 Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM D3552-96e1 Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM D3552-96(2007) Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM D3552-12 Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM B978/B978M-21 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum Matrix Composite Reinforced (ACAMCR), Formerly ACCR
ASTM A893-97 Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
ASTM A893/A893M-03(2008) Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
ASTM A893/A893M-03(2015) Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
ASTM D7617/D7617M-11 Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
ASTM D4075-06(2021) Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals
ASTM D4075-06(2017) Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals
ASTM D4075-02 Standard Test Methods for Compounding Materials-Flame Atomic Absorption Technique-Determination of Metals
ASTM E3370-23 Standard Practice for Matrix Array Ultrasonic Testing of Composites, Sandwich Core Constructions, and Metals

IPC - Association Connecting Electronics Industries, Frontiers of Metal Matrix Composites

IPC L-112A-1992 Specification for Composite Metal Clad Base Materials for Printed Boards
IPC L-115B-1990 Specification for Rigid Metal Clad Base Materials for Printed Boards
IPC CF-152B CD-1997 Composite Metallic Material Specification for Printed Wiring Board
IPC CF-152B-1997 Composite Metallic Material Specification for Printed Wiring Board
IPC CF-152A-1994 Composite Metallic Material Specification for Printed Wiring Boards

German Institute for Standardization, Frontiers of Metal Matrix Composites

DIN EN ISO 9693:2000 Dental ceramic fused to metal restorative materials (ISO 9693:1999); German version EN ISO 9693:2000
DIN EN ISO 11126-4:1998 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:1993); German version EN ISO 11126-4:1998
DIN EN ISO 11126-5:1998 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel refinery slag (ISO 11126-5:1993); German version EN ISO 11126-5:1998
DIN EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004); German version EN ISO 15613:2004
DIN EN ISO 15611:2004-03 Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003); German version EN ISO 15611:2003 / Note: To be replaced by DIN EN ISO 15611 (2022-08).
DIN EN ISO 15613:2004-09 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004); German version EN ISO 15613:2004 / Note: To be replaced by DIN EN ISO 15613 (2022-08).
DIN ISO 4384-1:2001 Plain bearings - Hardness testing of bearing metals - Part 1: Compound materials (ISO 4384-1:2000)
DIN EN 1011-5:2003-10 Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel; German version EN 1011-5:2003
DIN/TS 54464:2021 Adhesives - Determination of tensile lap-shear strength of bonded assemblies with composite and metal adherends
DIN EN ISO 15611:2022-08 Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO/DIS 15611:2022); German and English version prEN ISO 15611:2022 / Note: Date of issue 2022-07-08*Intended as replacem...
DIN EN 3948:1998 Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Wire; German version EN 3948:1998
DIN 30823:2001-06 Intermediate bulk containers - Rigid IBC - Metal, rigid plastics and composite intermediate bulk containers; Dimensions, design requirements, marking
DIN EN ISO 11126-3:1997 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:1993); German version EN ISO 11126-3:1997
DIN ISO 7905-3:1998 Plain bearings - Bearing fatigue - Part 3: Tests on plain strips of a metallic multilayer bearing material (ISO 7905-3:1996)
DIN EN ISO 11126-5:2018-12 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel slag (ISO 11126-5:2018); German version EN ISO 11126-5:2018
DIN EN ISO 15610:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003); German version EN ISO 15610:2003
DIN EN ISO 11124-2:2018-12 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:2018); German version EN ISO 11124-2:2018
DIN EN ISO 11126-8:2018-12 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine (ISO 11126-8:2018); German version EN ISO 11126-8:2018
DIN EN ISO 11126-9:2005-03 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite (ISO 11126-9:1999); German version EN ISO 11126-9:2004
DIN EN ISO 11124-2:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:2018)
DIN EN ISO 11124-4:2018-12 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:2018); German version EN ISO 11124-4:2018
DIN EN ISO 11125-1:2018-12 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:2018); German version EN ISO 11125-1:2018
DIN EN ISO 11126-4:2018-12 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:2018); German version EN ISO 11126-4:2018
DIN EN ISO 11126-6:2018-12 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron and steel slags (ISO 11126-6:2018); German version EN ISO 11126-6:2018
DIN EN ISO 15614-14:2013-12 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys (ISO 15614-14:2013); German version EN ISO 15614-14:2013

British Standards Institution (BSI), Frontiers of Metal Matrix Composites

BS EN ISO 16744:2003 Dentistry - Base metal materials for fixed dental restorations
PD CEN/CLC/TR 17603-31-05:2021 Space Engineering. Thermal design handbook. Structural Materials: Metallic and Composite
BS PD CEN/CLC/TR 17603-31-05:2021 Space Engineering. Thermal design handbook. Structural Materials: Metallic and Composite
BS ISO 5832-12:2007 Implants for surgery - Metallic materials - Wrought cobalt-chromium-molybdenum alloy
BS EN ISO 11124-4:1994 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Low-carbon cast-steel shot
BS ISO 23493:2020 Welding and allied processes. Process specification for laser-arc hybrid welding for metallic materials
22/30427287 DC BS EN ISO 15611. Specification and qualification of welding procedures for metallic materials. Qualification based on previous welding experience
22/30427291 DC Draft BS ENISO 15613. Specification and qualification of welding procedures for metallic materials. Qualification based on pre-production welding test
19/30384353 DC BS ISO 23493. Welding and allied processes. Recommendation for welding of metallic materials. Laser-arc hybrid welding
BS EN ISO 11126-9:2004 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Staurolite
BS EN ISO 11124-5:2021 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives - Cut steel wire
BS EN ISO 15609-6:2013 Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Laser-arc hybrid welding
BS EN ISO 11124-2:1994 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Chilled-iron grit
BS EN ISO 11124-2:2018 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Chilled-iron grit
BS EN ISO 15614-14:2013 Specification and qualification of welding procedures for metallic materials. Welding procedure test. Laser-arc hybrid welding of steels, nickel and nickel alloys
BS ISO 24360:2022 Composites and reinforcements fibres. Carbon fibre reinforced plastics (CFRPs) and metal assemblies. Determination of the cross tension strength
BS EN ISO 11126-5:2018 Tracked Changes. Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Nickel slag
BS EN ISO 11126-4:2018 Tracked Changes. Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Coal furnace slag
BS EN ISO 11126-6:2018 Tracked Changes. Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Iron and steel slags
BS ISO 22841:2021 Composites and reinforcements fibres. Carbon fibre reinforced plastics(CFRPs) and metal assemblies. Determination of the tensile lap-shear strength
BS ISO 22841:2021+A1:2022 Composites and reinforcements fibres. Carbon fibre reinforced plastics(CFRPs) and metal assemblies. Determination of the tensile lap-shear strength

Professional Standard - Aerospace, Frontiers of Metal Matrix Composites

QJ 1607-1989 Regulations on Compilation of Process Standards for Non-metallic Materials and Composite Materials

Professional Standard - Aviation, Frontiers of Metal Matrix Composites

HB 7616-1998 Test method for tensile properties of fiber reinforced metal matrix composite laminates
HB 7617-1998 Test method for flexural properties of fiber reinforced metal matrix composite laminates
HBJ 16-2006 Code for design of composite material workshop and metal bonding workshop in aviation industry

International Organization for Standardization (ISO), Frontiers of Metal Matrix Composites

ISO 16744:2003 Dentistry - Base metal materials for fixed dental restorations
ISO/DIS 15613 Specification and qualification of welding procedures for metallic materials — Qualification based on a pre-production welding test
ISO/FDIS 15613:2018 Specification and qualification of welding procedures for metallic materials — Qualification based on a pre-production welding test
ISO 4384-1:1982 Plain bearings; Hardness testing of bearing metals; Part 1 : Compound materials
ISO 4384-1:2012 Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings materials
ISO 4498-1:1978 Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 1: Materials of essentially uniform section hardness
ISO 11127-1:2020 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 1: Sampling
ISO 24360:2022 Composites and reinforcements fibres — Carbon fibre reinforced plastics (CFRPs) and metal assemblies — Determination of the cross tension strength
ISO 11119-3:2020/Amd 1:2023 Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sh
ISO 11127-5:2020 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 5: Determination of moisture
ISO 15610:2003 Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables
ISO 15610:2023 Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables
ISO 22841:2021 Composites and reinforcements fibres - Carbon fibre reinforced plastics(CFRPs) and metal assemblies - Determination of the tensile lap-shear strength

Professional Standard-Ships, Frontiers of Metal Matrix Composites

CB/T 4257-2013 Ultrasonic testing method of marine metallic composite
CB/Z 211-1984 Technical specification for ultrasonic flaw detection of marine metal composite materials

United States Navy, Frontiers of Metal Matrix Composites

NAVY A-A-59827-2009 TOPSIDE CONDUIT (FLEXIBLE) AND CONDUIT FITTINGS, ELECTRICAL: COMPOSITE BASED (NON-METALLIC)

Standard Association of Australia （SAA）, Frontiers of Metal Matrix Composites

AS 2320.6:2003 Implants for surgery - Metallic materials - Wrought cobalt-nickel-chromium-molybdenum alloy
AS/NZS 2053.8:1995 Conduits and fittings for electrical installations - Flexible conduits and fittings of metal or composite material

Professional Standard - Machinery, Frontiers of Metal Matrix Composites

JB/T 12074-2014 Quantitative analysis of composition metal.Electron probe microanalysis

国家铁路局, Frontiers of Metal Matrix Composites

TB/T 3415-2015 Non-metallic composite material parts for the exterior of EMU car body

European Committee for Standardization (CEN), Frontiers of Metal Matrix Composites

EN ISO 16744:2003 Dentistry - Base metal materials for fixed dental restorations ISO 16744:2003
CEN/CLC/TR 17603-31-05-2021 Space Engineering - Thermal design handbook - Part 5: Structural Materials: Metallic and Composite
EN ISO 15613:2004 Specification and qualification of welding procedure for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
prEN ISO 15613 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO/DIS 15613:2022)
prEN 24498-1-1992 Sintered metal materials, excluding hardmetals; determination of apparent hardness; part 1: materials of essentially uniform section hardness (ISO 4498-1:1990)
EN 24498-1:1993 Sintered Metal Materials, Excluding Hardmetals - Determination of Apparent Hardness - Part 1: Materials of Essentially Uniform Section Hardness (ISO 4498-1: 1990)

(U.S.) Ford Automotive Standards, Frontiers of Metal Matrix Composites

FORD ESF-M6A101-A-2003 METAL COMPOSITE, COPPER CLAD INVAR ***TO BE USED WITH FORD WSS-M99P1111-A***

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Frontiers of Metal Matrix Composites

IPC TM-650 2.1.5-1982 Surface Examination, Unclad and Metal Clad Material; Revision A - December 1982
IPC TM-650 2.4.8.2-1994 Peel Strength of Metallic Clad Laminates at Elevated Temperature (Hot Fluid Method); Revision A - December 1994
IPC TM-650 2.4.8.3-1994 Peel Strength of Metallic Clad Laminate at Elevated Temperature (Hot Air Method); Revision A - December 1994

ES-UNE, Frontiers of Metal Matrix Composites

UNE-CEN/CLC/TR 17603-31-05:2021 Space Engineering - Thermal design handbook - Part 5: Structural Materials: Metallic and Composite (Endorsed by Asociación Española de Normalización in September of 2021.)
UNE-EN ISO 11126-5:2019 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel slag (ISO 11126-5:2018)
UNE-EN ISO 11126-8:2019 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine (ISO 11126-8:2018, Corrected version 2018-11)
UNE-EN ISO 11124-2:2019 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:2018, Corrected version 2018-12)
UNE-EN ISO 11124-5:2022 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 5: Cut steel wire (ISO 11124-5:2019)
UNE-EN ISO 11126-6:2019 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron and steel slags (ISO 11126-6:2018)
UNE-EN ISO 11125-1:2019 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:2018)
UNE-EN ISO 11124-4:2019 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:2018)
UNE-EN ISO 11126-4:2019 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:2018)

Association Francaise de Normalisation, Frontiers of Metal Matrix Composites

NF L19-003:1992 Aéronautique et espace - Matériaux alvéolaires à cellules tubulaires - (M.A.C.T.) en matériaux composites et non métalliques - Généralités.
NF E22-561:1986 Plain bearings. Hardness testing of bearing metals. Part 1 : compound meterials.
NF EN 1011-5:2003 Soudage - Recommandations pour le soudage des matériaux métalliques - Partie 5 : soudage des aciers plaqués
NF ISO 5832-12:2019 Implants chirurgicaux - Matériaux métalliques - Partie 12 : alliage corroyé à base de cobalt, de chrome et de molybdène
NF EN ISO 5832-6:2022 Implants chirurgicaux - Matériaux métalliques - Partie 6 : alliage corroyé à base de cobalt, de nickel, de chrome et de molybdène
NF A89-102*NF ISO 23493:2021 Welding and allied processes - Process specification for laser-arc hybrid welding for metallic materials
NF ISO 23493:2021 Soudage et techniques connexes - Descriptif du procédé pour le soudage hybride laser-arc des matériaux métalliques
NF EN ISO 5832-3:2021 Implants chirurgicaux - Matériaux métalliques - Partie 3 : alliage corroyé à base de titane, d'aluminium-6 et de vanadium-4
NF T35-508-5*NF EN ISO 11126-5:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5 : nickel slag
NF A95-321-1:1993 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 1 : materials of essentially uniform section hardness.
NF T35-505-5*NF EN ISO 11124-5:2021 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 5 : cut steel wire
NF T35-505-2*NF EN ISO 11124-2:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2 : chilled-iron grit
NF T35-508-8*NF EN ISO 11126-8:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8 : olivine
NF T35-507-1*NF EN ISO 11125-1:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1 : sampling
NF T35-508-4*NF EN ISO 11126-4:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4 : coal furnace slag
NF T35-508-6*NF EN ISO 11126-6:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6 : Iron and steel slags
NF T35-505-4*NF EN ISO 11124-4:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4 : low-carbon cast-steel shot
NF T35-509-1*NF EN ISO 11127-1:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1 : sampling
NF EN ISO 11124-5:2021 Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Spécifications pour préparation par projection d'abrasifs métalliques - Partie 5 : fils d'acier coupés
NF A89-054*NF EN ISO 15611:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience
NF L19-103:1992 Aéronautique et espace - Matériaux alvéolaires à cellules tubulaires (M.A.C.T.) en matériaux composites et non métalliques imprégnés de résine thermodurcissable - Spécification technique - Exigences générales.
NF EN ISO 11126-6:2018 Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Spécifications pour abrasifs non métalliques destinés à la préparation par projection - Partie 6 : scories de four de métallurgie
NF T35-507-7*NF EN ISO 11125-7:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7 : determination of moisture
NF T35-508-7*NF EN ISO 11126-7:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7 : fused aluminium oxide
NF T35-508-3*NF EN ISO 11126-3:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3 : copper refinery slag
NF A89-053*NF EN ISO 15610:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables

国家市场监督管理总局、中国国家标准化管理委员会, Frontiers of Metal Matrix Composites

GB/T 40340-2021 Composites and metal assemblies—Galvanic corrosion tests of carbon fibre reinforced plastics (CFRPs) related bonded or fastened structures in artificial atmospheres—Salt spray tests
GB/T 38783-2020 Method of coating thickness determination for precious metal composites by scanning electron microscope
GB/T 39789-2021 Non-destructive testing of welds—Eddy current-video integrated testing method of metal composites weld

Professional Standard - Petroleum, Frontiers of Metal Matrix Composites

SY/T 6770.3-2010 Quality acceptance code of non-metalic pipe.Part 3:Anticorrosion plastic alloy composite pipe
SY/T 6770.2-2010 Quality acceptance code of non-metalic pipe.Part 2:Steel skeleton polyethylene plastic composite pipe
SY/T 6770.4-2012 Quality acceptance code of non-metalic pipes.Part 4 : Steel skeleton reinforced plastic coiled composite pipes

Danish Standards Foundation, Frontiers of Metal Matrix Composites

DS/EN ISO 15613:2006 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test
DS/EN 1011-5:2003 Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel
DS/ISO 23493:2020 Welding and allied processes – Process specification for laser-arc hybrid welding for metallic materials
DS/EN ISO 11126-4:1999 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag
DS/EN 24498-1:1994 Sintered metal materials,excluding hardmetals-Determination of apparent hardness-Part 1:Materials of essentially uniform section hardness
DS/EN ISO 11126-9:2005 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite
DS/EN ISO 11126-5:1999 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel refinery slag
DS/EN ISO 11126-6:1998 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag
DS/EN ISO 11126-7:2000 Preparation of steel substrates before application of paints and related products - Specification for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide
DS/EN ISO 11126-8:1998 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand
DS/EN ISO 11127-1:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling
DS/EN ISO 11124-5:2021 Preparation of steel substrates before application of paints and related products – Specifications for metallic blast-cleaning abrasives – Part 5: Cut steel wire (ISO 11124-5:2019)
DS/EN ISO 11125-1:1998 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling
DS/EN ISO 11126-3:1998 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag

未注明发布机构, Frontiers of Metal Matrix Composites

BS EN ISO 15613:2004(2009) Specification and qualification of welding procedures for metallic materials — Qualification based on pre - production welding test
BS EN ISO 11126-9:2004(2005)*BS 7079-F9:2004 Preparation of steel substrates before application of paints and related products — Specification for non - metallic blast - cleaning abrasives — Part 9 : Staurolite
BS EN ISO 11124-2:2018(2019) Preparation of steel substrates before application of paints and related products - Specifications for metallic blast - cleaning abrasives Part 2 : Chilled - iron grit

Lithuanian Standards Office , Frontiers of Metal Matrix Composites

LST EN 1011-5-2004 Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel
LST EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)

AWS - American Welding Society, Frontiers of Metal Matrix Composites

C2.23M/C2.23-2003 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum@ Zinc@ and Their Alloys and Composites for the Corrosion Protection of Steel
C2.23M/C2.23-2018 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum@ Zinc@ and Their Alloys and Composites for the Corrosion Protection of Steel (2nd Edition)

RO-ASRO, Frontiers of Metal Matrix Composites

SR ISO 4384-1:1994 Plain bearings - Hardness testing of bearing metals - Part 1: Compound materials

AENOR, Frontiers of Metal Matrix Composites

UNE-EN 1011-5:2003 Welding. Recomendations for welding of metallic materials. Part 5: Welding of clad steel
UNE-EN ISO 15613:2005 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)

International Electrotechnical Commission (IEC), Frontiers of Metal Matrix Composites

IEC 61035-2-3:1993 Specification for conduit fittings for electrical installations; part 2: particular specifications; section 3: fittings for flexible conduits of metal, insulating or composite materials and for pliable conduits of metal or composite materials

Aerospace, Security and Defence Industries Association of Europe (ASD), Frontiers of Metal Matrix Composites

ASD-STAN PREN 4489-2001 Aerospace Series Non-Metallic Materials Anaerobic Polymerisable Compounds Threadlocking Torque Strength 5 Nm (Edition P 1)
ASD-STAN PREN 3796-1997 Aerospace Series Anaerobic Polymerisable Compounds Test Method Determination of Ability of Anaerobic Polymerisable Compounds to Set on Metal Surfaces (Edition P1)
ASD-STAN TR 7000-7-2002 Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 7: Anaerobic Polymerisable Compounds
ASD-STAN PREN 4491-2001 Aerospace Series Non-Metallic Materials Anaerobic Polymerisable Compounds Threadlocking Torque Strength 16 Nm (Edition P1)
ASD-STAN PREN 4492-2001 Aerospace Series Non-Metallic Materials Anaerobic Polymerisable Compounds Threadlocking Torque Strength 19 Nm (Edition P 1)
ASD-STAN PREN 7000-7-1998 Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 7: Anaerobic Polymerisable Compounds

YU-JUS, Frontiers of Metal Matrix Composites

JUS C.A4.051-1986 Mechanical testing of metals. Determination ofapparent hardness of sintered metalmaterials, excluding hardmetals - Materials of essentially uniform section hardness

SSPC - The Society for Protective Coatings, Frontiers of Metal Matrix Composites

CS 23.00-2000 Interim Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum@ Zinc@ and Their Alloys and Composites for the Corrosion Protection of Steel
CS 23.00-2003 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum@ Zinc@ and Their Alloys and Composites for the Corrosion Protection of Steel (NACE No.12; AWS C2.23M/C2.23)

GOSTR, Frontiers of Metal Matrix Composites

GOST 33421-2015 Composite and cermet brake blocks for railway rolling stock. General specifications

GB-REG, Frontiers of Metal Matrix Composites

REG NASA-LLIS-2256-2009 Lessons Learned ?Penetrant Evaluation of Metallic Tanks and Composite Overwrapped Pressure Vessel Liners

IT-UNI, Frontiers of Metal Matrix Composites

UNI EN ISO 11127-1:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling

国家能源局, Frontiers of Metal Matrix Composites

SY/T 6770.3-2018 Specifications for quality acceptance of non-metallic pipes Part 3: Thermoplastic lined fiberglass reinforced plastic composite pipes
SY/T 6770.5-2016 Specifications for Quality Acceptance of Non-metallic Pipes Part 5: Fiber Reinforced Thermoplastic Composite Coiled Pipes

The Society for Protective Coatings (SSPC), Frontiers of Metal Matrix Composites

SSPC CS 23.00-2003 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel (NACE No.12; AWS C2.23M/C2.23)

National Association of Corrosion Engineers (NACE), Frontiers of Metal Matrix Composites

NACE NO.12-2003 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel (AWS C2.23M; SSPC-CS 23.00; Item No. 21100)