ZH
RU
ES

Quantitative electropherogram

Quantitative electropherogram, Total:363 items.

In the international standard classification, Quantitative electropherogram involves: Rubber, Plastics, Radiocommunications, Testing of metals, Space systems and operations, Acoustics and acoustic measurements, Non-destructive testing, Medical equipment, Medical sciences and health care facilities in general, Technical drawings, Astronomy. Geodesy. Geography, TESTING, Analytical chemistry, Test conditions and procedures in general, Photography, Lifting equipment, Ferrous metals, Thermodynamics and temperature measurements, Vocabularies, Information sciences. Publishing, Audio, video and audiovisual engineering, Mobile services, Metrology and measurement in general, Welding, brazing and soldering, Measurement of volume, mass, density, viscosity, Document imaging applications, Products of the chemical industry, Materials for aerospace construction, Applications of information technology, Food products in general, Components and accessories for telecommunications equipment, Linear and angular measurements, Electricity. Magnetism. Electrical and magnetic measurements, Optical equipment, Optics and optical measurements, Protective equipment, Character sets and information coding, Inorganic chemicals, Environmental protection, Graphic technology, MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE, Radiation measurements, Solar energy engineering, Fibre optic communications, Piezoelectric and dielectric devices, Dentistry, Electronic tubes, Electronic display devices, Paper products, Rotating machinery, Protection against crime, Burners. Boilers.

Association Francaise de Normalisation, Quantitative electropherogram

NF T46-055:2005 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength.
NF ISO 6133:2015 Caoutchouc et plastiques - Analyse des tracés multi-pics obtenus lors des déterminations de la résistance au déchirement et de la force d'adhérence
NF A09-205-1:1994 Non-destructive testing. Image quality of radiogaphs. Part 1 : image quality indicators (wire type), determination of image quality value.
NF A09-205-2:1994 Non-destructive testing. Image quality of radiographs. Part 2 : image quality indicators (step/hole type). Determination of image quality value.
NF E04-602-1*NF ISO 9959-1:1993 Numerically controlled draughting machines. Drawing test for the evaluation of performance. Part 1 : vector plotters.
NF A09-205-1*NF EN ISO 19232-1:2013 Non-destructive testing - Image quality of radiographs - Part 1 : Determination of the image quality value using wire-type image quality indicators
NF EN ISO 19232-1:2013 Essais non destructifs - Qualité d'image des radiogrammes - Partie 1 : détermination de l'indice de qualité d'image à l'aide d'indicateurs à fils
NF T46-055:1990 Vulcanized or thermoplastic rubber. Analysis of the multipeak traces obtained when determining the adhesive strength and the tear strength.
NF EN 13068-1:2000 Essais non destructifs - Contrôle par radioscopie - Partie 1 : mesure quantitative des caractéristiques d'image
NF EN ISO 19232-5:2018 Essais non destructifs - Qualité d'image des radiogrammes - Partie 5 : détermination de l'indice de flou de l'image et de la résolution spatiale de base à l'aide d'indicateurs de qualité d'image duplex à fils
NF EN ISO 19232-2:2013 Essais non destructifs - Qualité d'image des radiogrammes - Partie 2 : Détermination de l'indice de qualité d'image à l'aide d'indicateurs à trous et à gradins
NF A09-205-5*NF EN ISO 19232-5:2018 Non-destructive testing - Image quality of radiographs - Part 5 : determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators
NF ISO 16900-12:2016 Appareils de protection respiratoire - Méthodes d'essai et équipement d'essai - Partie 12 : détermination du travail respiratoire en fonction du volume respiratoire et détermination des pics de pressions respiratoires
NF C97-501*NF EN 61610:1996 Prints and transparencies produced from electronic sources. Assessment of image quality.
NF EN ISO 14096-1:2020 Essais non destructifs - Qualification des systèmes de numérisation des films radiographiques - Partie 1 : définitions, mesures quantitatives des paramètres de qualité d'image, film de référence normalisé et contrôle qualitatif
NF A09-252-1*NF EN ISO 14096-1:2020 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1 : definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
NF C93-593-7*NF EN 61580-7:2002 Methods of measurement for waveguides - Part 7 : graphical method for the determination of waveguide performance.
NF C95-224:1975 ELECTRONIC TUBES WITH QUALITY CONFORMANCE PROCEDURES IMAGE CONVERTER AND IMAGE INTENSIFIER TUBES PARTICULAR REQUIREMENTS
NF ISO 8559-3:2019 Désignation des tailles des vêtements - Partie 3 : méthodologie de création des barèmes de mensuration du corps et des intervalles
NF IEC EN 62464-1:2019 Appareils à résonance magnétique pour imagerie médicale - Partie 1 : détermination des principaux paramètres de qualité d'image
NF A09-252-1:2003 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control.
NF EN 61580-7:2002 Méthodes de mesure appliquées aux guides d'ondes - Partie 7 : méthode graphique pour déterminer les performances d'un guide d'ondes
NF P98-200-3:1993 Road testing. Measurement of a rolling load deflection. Part 3 : determination of defletion values using deflectograph 02.
NF P98-200-4:1993 Road testing. Measurement of a rolling load deflection. Part 4 : determination of deflection using deflectrograph 03.
NF P98-200-6:1993 Road testing. Measurement of a rolling load deflection. Part 6 : determination of deflection values using concrete deflectograph.
NF A04-106:1984 Iron and steel. Methods of determination of content of non metallic inclusions in wrought steel. Part II : micrographic method using standards diagrams.
NF A09-205-5:2013 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators
NF EN 61262-5:1994 Appareils électromédicaux - Caractéristiques des intensificateurs électro-optiques d'image radiologique partie 5 : détermination de l'efficacité quantique de détection
NF C74-225*NF EN 61262-5:1994 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 5 : determination of the detective quantum efficiency.
NF EN 60034-28:2013 Machines électriques tournantes - Partie 28 : méthodes d'essai pour la détermination des grandeurs des schémas d'équivalence des circuits pour moteurs à induction à cage basse tension triphasés

International Organization for Standardization (ISO), Quantitative electropherogram

ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO/TR 18147:2014 Space environment (natural and artificial) - Method of the solar energetic protons fluences and peak fluxes determination
ISO 23747:2007 Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
ISO 23747:2015 Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
ISO 9959-1:1992 Numerically controlled draughting machines; drawing test for the evaluation of performance; part 1: vector plotters
ISO 19232-1:2004 Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value
ISO 19232-2:2004 Non-destructive testing - Image quality of radiographs - Part 2: Image quality indicators (step/hole type) - Determination of image quality value
ISO 19232-1:2013 Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators
ISO 19232-2:2013 Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators
ISO 19232-1:2004/Cor 1:2007 Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value; Technical Corrigendum 1
ISO 4967:1979 Steel; Determination of content of non-metallic inclusions; Micrographic method using standard diagrams
ISO 19232-5:2004 Non-destructive testing - Image quality of radiographs - Part 5: Image quality indicators (duplex wire type) - Determination of image unsharpness value
ISO 19232-5:2018 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators
ISO 19232-2:2004/Cor 1:2007 Non-destructive testing - Image quality of radiographs - Part 2: Image quality indicators (step/hole type) - Determination of image quality value; Technical Corrigendum 1
ISO 11661:2022 Mobile cranes — Presentation of rated capacity charts
ISO 19232-5:2013 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators
ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium - Determination of alpha alumina content - Method using X-ray diffraction net peak areas
ISO 4967:1998 Steel - Determination of content of nonmetallic inclusions - Micrographic method using standard diagrams
ISO 4287:1997/Amd 1:2009 Geometrical Product Specification (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters; Amendment 1: Peak count number
ISO 16972:2010 Respiratory protective devices - Terms, definitions, graphical symbols and units of measurement
ISO 15795:2002 Optics and photonics - Quality evaluation of optical systems - Assessing the image quality degradation due to chromatic aberrations
ISO 14096-1:2005 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
ISO/IEC 29794-6:2015 Information technology — Biometric sample quality — Part 6: Iris image data
ISO/TR 20791-1:2020 Photography — Photographic reflection prints — Part 1: Evaluation methods of image quality
ISO 4967:2013 Steel.Determination of content of non-metallic inclusions.Micrographic method using standard diagrams
ISO 20954-1:2019 Digital cameras — Measurement method for image stabilization performance — Part 1: Optical systems
ISO 15795:2002/cor 1:2007 Optics and optical instruments - Quality evaluation of optical systems - Assessing the image quality degradation due to chromatic aberrations; Technical Corrigendum 1
ISO/TS 18621-11:2022 Graphic technology — Image quality evaluation methods for printed matter — Part 11: Colour gamut analysis
ISO 18909:2022 Photography — Processed photographic colour films and paper prints — Methods for measuring image stability
ISO 19056-1:2015 Microscopes - Definition and measurement of illumination properties - Part 1: Image brightness and uniformity in bright field microscopy
ISO 18909:2006/Cor 1:2006 Photography — Processed photographic colour films and paper prints — Methods for measuring image stability

German Institute for Standardization, Quantitative electropherogram

DIN ISO 6133:2004 Rubber and plastics - Analysis of multipeak traces obtained in determination of tear strength and adhesion strength (ISO 6133:1998)
DIN ISO 6133:2017 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength (ISO 6133:2015)
DIN EN ISO 19232-1:2013-12 Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013); German version EN ISO 19232-1:2013
DIN EN ISO 19232-2:2013-12 Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators (ISO 19232-2:2013); German version EN ISO 19232-2:2013
DIN 19045-7:1996 Projection of still and motion-pictures - Measuring methods for the determination of imaging properties of slide projectors
DIN EN 61610:1996 Prints and transparencies produced from electronic sources - Assessment of image quality (IEC 61610:1995); German version EN 61610:1996
DIN EN ISO 19232-2:2013 Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators (ISO 19232-2:2013); German version EN ISO 19232-2:2013
DIN EN ISO 19232-5:2018-12 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators (ISO 19232-5:2018); German version EN ISO 19232-5:2018
DIN ISO 15795:2008 Optics and photonics - Quality evaluation of optical systems - Assessing the image quality degradation due to chromatic aberrations (ISO 15795:2002+Cor. 1:2007);English version of DIN ISO 15795:2008-04
DIN EN ISO 19232-5:2018 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators (ISO 19232-5:2018)
DIN EN 61580-7:1997 Methods of measurement for waveguides - Part 7: Graphic method for the determination of waveguide performance (IEC 61580-7:1996); German version EN 61580-7:1996
DIN 51926:1997 Testing of carbon materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
DIN EN ISO 19232-5:2013 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators (ISO 19232-5:2013); German version EN ISO 19232-5:2013
DIN 6868-100:2019-04 Image quality assurance in diagnostic X-ray departments - Part 100: Determination of physical parameters for the evaluation of the image quality in digital mammography
DIN 51926:2009 Testing of carbonaceous materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
DIN 51926:2016 Testing of carbonaceous materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
DIN EN 14096-1:2003 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control; German version EN 14096-1:2003
DIN 51926:2016-08 Testing of carbonaceous materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials
DIN 6868-13:2003 Image quality assurance in X-ray departments - Part 13: Constancy testing of projection radiography systems with digital image receptors
DIN EN ISO 14096-1:2020-10 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control (ISO 14096-1:2005); German version EN ISO 14...
DIN EN ISO 14096-1:2020 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control (ISO 14096-1:2005)
DIN 6868-4:1987 Image quality assurance in X-ray diagnosis; constancy checking in radioscopy with an X-ray image intensifier and photography from the X-ray image intensifier output screen
DIN 58141-5:2011-03 Measurement of fiber optic elements - Part 5: Determination of visual defects of light and image guides; Text in German and English
DIN 6868-5:2001 Image quality assurance in X-ray diagnostics - Part 5: Constancy testing in dental radiology
DIN EN 61262-5:1995 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 5: Determination of the detective quantum efficiency (IEC 61262-5:1994); German version EN 61262-5:1994
DIN EN 61580-7:1997-05 Methods of measurement for waveguides - Part 7: Graphic method for the determination of waveguide performance (IEC 61580-7:1996); German version EN 61580-7:1996
DIN 6868-157:2014 Image quality assurance in diagnostic X-ray departments - Part 157: X-ray ordinance acceptance and constancy test of image display systems in their environment
DIN 6868-157:2022-01 Image quality assurance in diagnostic X-ray departments - Part 157: X-ray ordinance acceptance and constancy test of image display systems in their environment
DIN 6868-2:1996-07 Image quality assurance in X-ray diagnosis - Part 2: Constancy testing of film processing
DIN ISO 15795:2006 Optics and optical instruments - Quality evaluation of optical systems - Assessing the image quality degradation due to chromatic aberrations (ISO 15795:2002);English version of DIN ISO 15795-2006-03
DIN V 6868-12:1996-03 Image quality assurance in X-ray diagnostics - Part 12: Constancy tests for hard copy cameras
DIN 6868-13:2012 Image quality assurance in diagnostic X-ray departments - Part 13: RöV constancy test of projection radiography systems with digital image receptors
DIN 6868-157:2022 Image quality assurance in diagnostic X-ray departments - Part 157: X-ray ordinance acceptance and constancy test of image display systems in their environment
DIN ISO 9358:2021 Optics and optical instruments - Veiling glare of image-forming systems - Definitions and methods of measurement (ISO 9358:1994)
DIN ISO 9358:2020 Optics and optical instruments - Veiling glare of image forming systems - Definitions and methods of measurement (ISO 9358:1994); Text in German and English
DIN EN IEC 62464-1:2021-10 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters (IEC 62462-1:2018); German version EN IEC 62464-1:2019
DIN 6868-7:2004-04 Image quality assurance in X-ray departments - Part 7: Constancy testing of mammographic X-ray equipment / Note: Applies in conjunction with DIN 6868-1 (1985-02), DIN 6868-2 (1996-07).
DIN 6868-8:1993 Image quality assurance in X-ray diagnosis; constancy testing of systems for Digital Subtraction Angiography
DIN 6868-7:2004 Image quality assurance in X-ray departments - Part 7: Constancy testing of mammographic X-ray equipment
DIN EN 62464-1:2019 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters (IEC 62B/1068/CDV:2017); German and English version prEN 62464-1:2017
DIN 6868-3:2000 Image quality assurance in diagnostic X-ray departments - Part 3: Tests for constancy in direct radiography
DIN EN 62220-1:2005 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1: Determination of the detective quantum efficiency (IEC 62220-1:2003); German version EN 62220-1:2004
DIN 6868-159:2021 Image quality assurance in diagnostic X-ray departments - Part 159: Acceptance and constancy testing in teleradiology
DIN 6868-3:2000-09 Image quality assurance in diagnostic X-ray departments - Part 3: Tests for constancy in direct radiography / Note: Applies in conjunction with DIN 6868-1 (1985-02), DIN 6868-2 (1996-07).
DIN 6868-5:2020-05 Image quality assurance in diagnostic X-ray departments - Part 5: Constancy testing of dental radiographic equipment
DIN 28184-1:1988 Fixed head tubular heat exchangers with type 25 tubes and triangular 32 tube pitch; number and pattern of tubes
DIN 28184-2:1988 Fixed head heat exchangers with type 25 tubes and square 32 tube pitch; number and pattern of tubes

International Telecommunication Union (ITU), Quantitative electropherogram

ITU-R S.732-2012 Method for statistical processing of earth station antenna side-lobe peaks to determine excess over antenna reference patterns and conditions for acceptability of any excess
ITU-R BT.812-1992 Subjective Assessment of the Quality of Alphanumeric and Graphic Pictures in Teletext and Similar Services
ITU-R BT.500-11-2002 Methodology for the subjective assessment of the quality of television pictures
ITU-R S.732-1-2012 Method for statistical processing of earth station antenna side-lobe peaks to determine excess over antenna reference patterns and conditions for acceptability of any excess
ITU-R BT.1845-1-2010 Guidelines on metrics to be used when tailoring television programmes to broadcasting applications at various image quality levels, display sizes and aspect ratios
ITU-R BT.813 FRENCH-1992 Methods for objective picture quality assessment in relation to impairments from digital coding of television signals
ITU-R BT.813 SPANISH-1992 METHODS FOR OBJECTIVE PICTURE QUALITY ASSESSMENT IN RELATION TO IMPAIRMENTS FROM DIGITAL CODING OF TELEVISION SIGNALS
ITU-R QUESTION 126/6-2007 Recommended operating practices to tailor television programme material to broadcasting applications at various image quality levels and sizings

British Standards Institution (BSI), Quantitative electropherogram

BS ISO 6133:1998 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
PD ISO/TR 18147:2014 Space environment (natural and artificial). Method of the solar energetic protons fluences and peak fluxes determination
BS PD ISO/TR 18147:2014 Space environment (natural and artificial). Method of the solar energetic protons fluences and peak fluxes determination
BS 6840-10:1991 Sound system equipment. Methods for specifying and measuring the characteristics of peak programme level meters
BS EN ISO 19232-2:2013 Non-destructive testing. Image quality of radiographs. Determination of the image quality value using step/hole-type image quality indicators
BS EN 462-2:1994 Non-destructive testing - Image quality of radiographs - Image quality indicators (step/hole type) - Determination of image quality value
BS EN ISO 23747:2009 Anaesthetic and respiratory equipment. Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
BS ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium. Determination of alpha alumina content. Method using X-ray diffraction net peak areas
20/30375405 DC BS ISO 11661. Mobile cranes. Presentation of rated capacity charts
BS EN 61580-7:1997 Methods of measurement for waveguides. Graphical method for the determination of waveguide performance
BS ISO 20954-1:2019 Digital cameras. Measurement method for image stabilization performance - Optical systems
BS EN ISO 19232-5:2018 Tracked Changes. Non-destructive testing. Image quality of radiographs. Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators
BS ISO 16972:2010 Respiratory protective devices. Terms, definitions, graphical symbols and units of measurement
BS ISO 16759:2013 Graphic technology. Quantification and communication for calculating the carbon footprint of print media products
BS ISO 15795:2002 Optics and photonics - Quality evaluation of optical systems - Assessing the image quality degradation due to chromatic aberrations
BS EN ISO 14096-1:2020 Non-destructive testing. Qualification of radiographic film digitisation systems - Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
PD IEC TS 63109:2022 Photovoltaic (PV) modules and cells. Measurement of diode ideality factor by quantitative analysis of electroluminescence images
BS EN 112000:1997 Harmonized system of quality assessment for electronic components - Generic specification: image converter and image intensifier tubes
BS EN 112000:1980 Harmonized system of quality assessment for electronic components - Generic specification: image converter and image intensifier tubes
BS EN IEC 62464-1:2019 Tracked Changes. Magnetic resonance equipment for medical imaging. Determination of essential image quality parameters
BS ISO 19056-1:2015 Microscopes. Definition and measurement of illumination properties. Image brightness and uniformity in bright field microscopy
BS EN 61262-5:1995 Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment.. Determination of the detective quantum efficiency
BS EN 60034-28:2007 Rotating electrical machines - Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors
BS EN 60034-28:2013 Rotating electrical machines. Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors
BS ISO 18909:2022 Tracked Changes. Photography. Processed photographic colour films and paper prints. Methods for measuring image stability

YU-JUS, Quantitative electropherogram

JUS G.S2.152-1985 Rubber and plastics. Analysis of multi-peak traces obtained in determination of tear strength and adhesion strength
JUS C.A3.013-1987 Determination ofcontent of non-metallic inclusions in stee/. Micrographic method using standarddiagrams

ZA-SANS, Quantitative electropherogram

SANS 16133:2003 Rubber and plastics - Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength

RO-ASRO, Quantitative electropherogram

STAS 11071/2-1978 Legal metrology BLOCK DIAGRAM OF HIERARCHY F MEASURING INSTRUMENTS FOR FLUID VOLUMES
STAS 11071/5-1978 Legal metrology BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR MASS
STAS 11071/11-1978 Legal metrology BLOCK DIAGRAMS OF HIERARCHY OF MEASURING INSTRUMENTS FOR ELECTRICAL TENSION
STAS 11071/12-1978 Legal metrology BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR ELECTRICAL RKSISTANCF.|
STAS 11071/3-1981 Legal metrology LOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR PLAN ANGLE
STAS SR EN 462-1-1996 Non-destructive testing. Image quality of radiographs. Part 1: image quality indicators (wire type). Determination of image quality value
STAS 11071/13-1978 Legal metrology BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR ELECTRICAL POWER AND ENERGY
STAS 11071/16-1979 Legal metrology BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR pH AQUEOUS SOLUTIONS
STAS 11071/17-1983 Legal mc Lrology BLOCK DIAGRAM OF [UERAKCH V OF MEASURING INSTRUMENTS FOR ELECTRICAL CAPACITANCE
STAS 11071/7-1978 Legal metrologyBLOCK DIAGRAMS OF HIERARCHY OF MEASURING INSTRUMENTS FOR PRESSURE
STAS SR EN 462-2-1996 Non-destructive testing. Image quality of radiographs. Part 2: Image quality indicators (step/hole type). Determination of image quality value
STAS 11071/9-1978 Legal metrology BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR VISCOSITY OF NEWTONIAN LIQUIDS
STAS 11071/20-1983 Legal metrology BLOCK DIAGRAM OF= HIERARCHY OF MEASURING INSTRUMENTS FOR EXPOSURE AND DEBIT OF EXPOSURE

未注明发布机构, Quantitative electropherogram

DIN EN 462-2:1994 Image quality test body (step/hole type) — Determination of the image quality number
BS EN 462-1:1994(2008) Non - destructive testing — Image quality of radiographs — Part 1 : Image quality indicators (wire type) — Determination of image quality value
BS EN 462-2:1994(2008) Non - destructive testing — Image quality of radiographs — Part 2 : Image quality indicators (step / hole type) — Determination of image quality value
BS 6840-10:1991(1999)*IEC 268-10:1991 Sound system equipment — Part 10 : Methods for specifying and measuring the characteristics of peak programme level meters
BS EN 462-5:1996 Non - destructive testing - Image quality of radiographs Part 5. Image quality indicators ( duplex wire type ), determination of image unsharpness value
DIN EN 462-5:1996 Non-destructive testing – Image quality of radiographs DI Part 5: Image test body (double wire bar) Determination of image blur

Professional Standard - Ferrous Metallurgy, Quantitative electropherogram

YB/T 5360-2006 Determination of Quantitative Pole Figures of Metallic Materials

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Quantitative electropherogram

GB/T 17103-1997 Metal material--Quantitative pole figure preparing method
GB/T 19996-2005 Standard for quality assessment of published mapping products
GB/T 21458-2008 Mobile cranes.Presentation of rated capacity charts
GB/T 10561-2005 Steel.Determination of content of nonmetallic inclusions.Micrographic method using standards diagrams
GB/T 10561-2023 Standard grading chart microscopic examination method for determination of non-metallic inclusion content in steel
GB/T 18876.3-2008 Standard practice for determining the metallographical constituent and inclusion content of steels and other metals by automatic image analysis.Part 3:Determining the carbides rating in steels by automatic image analysis and stereology
GB/T 18876.2-2006 Standard practice for determination the metallographical constituent and inclusion content of steels and other metals by automatic image analysis.Part 2:Determining the inclusion ratings of steels by automatic image analysis and stereology
GB/T 18876.1-2002 Standard practice for determining the metallographical constituent and inclusion content of steels and other metals by automatic image analysis-Part 1: Determining the inclusion or second-phase constituent content of steels and other metals by automatic

Indonesia Standards, Quantitative electropherogram

SNI ISO 19232-1:2014
SNI ISO 19232-2:2014
SNI ISO 19232-5:2014
SNI IEC 61610:2008 Prints and transparencies produced fromelectronic sources - Assesment of image quality
SNI 18-6935-2002 Radiographic image quality indicators for non-destructive testing - Principles and identification

Lithuanian Standards Office , Quantitative electropherogram

LST EN 462-1-2001 Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value
LST EN 462-2-2001 Non-destructive testing - Image quality of radiographs - Part 2: Image quality indicators (step/hole type) - Determination of image quality value
LST EN 462-5-2001 Non-destructive testing - Image quality of radiographs - Part 5: Image quality indicators (duplex wire type), determination of image unsharpness value
LST EN ISO 23747:2015 Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (ISO 23747:2015)
LST EN 4861-2021 Aerospace series - Metrological assessment procedure for kinematic fields measured by digital image correlation
LST EN 14096-1-2004 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
LST EN 62464-1-2007 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters (IEC 62464-1:2007)

Danish Standards Foundation, Quantitative electropherogram

DS/EN 462-1:1994 Non-destructive testing. Image quality of radiographs. Part 1: Image quality indicators (wire type). Determination of image quality value
DS/EN ISO 19232-1:2013 Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators
DS/EN 462-2:1994 Non-destructive testing-Image quality of radio-graphs-Part 2:Image quality indicators (step/hole type)-Determination of image quality value
DS/EN ISO 19232-2:2013 Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators
DS/EN ISO 19232-5:2013 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators
DS/ISO 1027:1987 Radiographic image quality indicators for non-destructive testing. Principles and identification
DS/EN 14096-1:2003 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
DS/EN 62464-1:2007 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
DS/EN 61262-5:2013 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 5: Determination of the detective quantum efficiency
DS/EN 60034-28:2007 Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors
DS/EN 60034-28:2013 Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors

Korean Agency for Technology and Standards (KATS), Quantitative electropherogram

KS B ISO 19232-1:2021 Non-destructive testing — Image quality of radiographs —Part 1: Determination of the image quality value using wire-type image quality indicators
KS M 1915-2009 Phthalic anhydride for industrial use－Methods of test－Determination of 1,4-naphthaquinone content－Colorimetric method
KS B ISO 19232-2:2021 Non-destructive testing — Image quality of radiographs —Part 2: Determination of the image quality value using step/hole-type image quality indicators
KS D ISO 15349-1-2005(2015) Unalloyed steel－Determination of low carbon content－Part 1：Infrared absorption method after combustion in an electric resistance furnace(by peak separation)
KS B ISO 19232-5:2021 Non-destructive testing — Image quality of radiographs —Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators
KS C IEC 61580-7-2008(2018) Methods of measurement for waveguides－Part 7：Graphical method for the determination of waveguide performance
KS B ISO 15795:2011 Optics and photonics-Quality evaluation of optical systems-Assessing the image quality degradation due to chromatic aberrations
KS B ISO 15795-2011(2021) Optics and photonics — Quality evaluation of optical systems —Assessing the image quality degradation due to chromatic aberrations
KS C IEC 61580-7:2008 Methods of measurement for waveguides－Part 7：Graphical method for the determination of waveguide performance
KS B ISO 14096-1:2007 Non-destructive testing－Qualification of radiographic film digitisation systems－Part 1：Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
KS B ISO 14096-1-2007(2022) Non-destructive testing－Qualification of radiographic film digitisation systems－Part 1：Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative contr
KS B ISO 14096-1-2007(2017) Non-destructive testing－Qualification of radiographic film digitisation systems－Part 1：Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative contr
KS D 0204-2007(2022) Steel－Determination of content of nonmetallic inclusions－Micrographic method using standard diagrams
KS D 0204-2002 Steel－Determination of content of nonmetallic inclusions－Micrographic method using standard diagrams
KS D 0204-2007(2017) Steel－Determination of content of nonmetallic inclusions－Micrographic method using standard diagrams
KS C IEC 60122-3:2003 Quartz crystal units of assessed quality－Part 3：Standard outlines and lead connections
KS A ISO 10977:2005 Photography－Processed photographic colour films and paper prints－Methods for measuring image stability
KS X ISO 15790-2005(2020) Graphic technology and photography－Certified reference materials for reflection and transmission metrology－Documentation and procedures for use, including determination of combined standard uncertaint
KS C IEC 60034-28:2014 Rotating electrical machines — Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors
KS C IEC 61262-5:2003 Medical electrical equipment－Characteristics of electro-optical X-ray image intensifiers－Part 5：Determination of the detective quantum efficiency

KR-KS, Quantitative electropherogram

KS B ISO 19232-1-2021 Non-destructive testing — Image quality of radiographs —Part 1: Determination of the image quality value using wire-type image quality indicators
KS B ISO 19232-2-2021 Non-destructive testing — Image quality of radiographs —Part 2: Determination of the image quality value using step/hole-type image quality indicators
KS B ISO 11661-2018(2023) Mobile cranes — Presentation of rated capacity charts
KS B ISO 19232-5-2021 Non-destructive testing — Image quality of radiographs —Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators
KS B ISO 15795-2023 Optics and optical instruments — Quality evaluation of optical systems — Assessing the image quality degradation due to chromatic aberrations
KS B ISO 14096-1-2023 Non-destructive testing — Qualification of radiographic film digitisation systems — Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative
KS B ISO 9358-2023 Optics and optical instruments — Veiling glare of image forming systems — Definitions and methods of measurement
KS A ISO 10977-2005 Photography－Processed photographic colour films and paper prints－Methods for measuring image stability

National Metrological Verification Regulations of the People's Republic of China, Quantitative electropherogram

JJG 660-1990 Verification Regulation of Patten Area Measuring Instruments
JJG(烟草) 20-2003 Regulations for verification of suction flow chart of smoking machine for tobacco

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Quantitative electropherogram

GB/T 19996-2017 Quality assessment of paper map publications
GB/T 35881-2018 Inspection of grain and oils—Determination of yellow-colored kernelof paddy—Image analysis method

European Committee for Standardization (CEN), Quantitative electropherogram

EN 462-1:1994 Non-Destructive Testing - Image Quality of Radiographs - Part 1: Image Quality Indicators (Wire Type) - Determination of Image Quality Value
EN ISO 19232-2:2013 Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators [Superseded: CEN EN 462-2]
EN ISO 19232-1:2013 Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators
EN 462-2:1994 Non-Destructive Testing - Image Quality of Radiographs Part 2: Image Quality Indicators (Step/Hole Type) - Determination of Image Quality Value
EN ISO 19232-5:2013 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators [Superseded: CEN EN 462-5]
EN 462-5:1996 Non-Destructive Testing - Image Quality of Radiographs - Part 5: Image Quality Indicators (Duplex Wire Type), Determination of Image Unsharpness Value
EN 4861:2020 Aerospace series - Metrological assessment procedure for kinematic fields measured by digital image correlation
EN ISO 14096-1:2020 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control (ISO 14096-1:2005)
EN 14096-1:2003 Non-destructive testing - Qualification of radiographic film digitalisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control

Japanese Industrial Standards Committee (JISC), Quantitative electropherogram

JIS B 3411-1:1998 Numerically controlled draughting machines -- Drawing test for the evaluation of performances -- Part 1: Vector plotters
JIS Z 2307:2017 Determination of the image unsharpness value using duplex wire-type image quality indicators
JIS G 1211-4 AMD 1:2013 Iron and steel.Determination of carbon content.Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating (Amendment 1)
JIS G 1211-4 AMD 2:2017 Iron and steel -- Determination of carbon content -- Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating (Amendment 2)
JIS G 1211-4:2011 Iron and steel -- Determination of carbon content -- Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating
JIS Z 4952:2012 Magnetic resonance equipment for medical imaging -- Part 1: Determination of essential image quality parameters
JIS Z 4952:2022 Magnetic resonance equipment for medical imaging -- Part 1: Determination of essential image quality parameters
JIS C 61280-2-11:2010 Fiber optic communication subsystem test procedures -- Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring

AENOR, Quantitative electropherogram

UNE-EN ISO 19232-1:2014 Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013)
UNE-EN ISO 19232-2:2014 Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators (ISO 19232-2:2013)
UNE 58155:2002 Mobile cranes. Presentation of rated capacity charts.
UNE-EN ISO 19232-5:2014 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators (ISO 19232-5:2013)
UNE 82307:1994 MEASUREMENT OF ROUNDNESS AND CURVE PROFILES. BLOCK DIAGRAM OF A MEASURING SYSTEM. TERMS, DEFINITIONS AND PARAMETERS OF ROUNDNESS.
UNE-EN 14096-1:2003 Non-destructive testing- Qualification of radiographic film digitisation systems. Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control.
UNE-EN 62464-1:2007 Magnetic resonance equipment for medical imaging -- Part 1: Determination of essential image quality parameters (IEC 62464-1:2007).
UNE-EN 61262-5:1996 MEDICAL ELECTRICAL EQUIPMENT. CHARACTERISTICS OF ELECTRO-OPTICAL X-RAY IMAGE INTENSIFIERS. PART 5: DETERMINATION OF THE DETECTIVE QUANTUM EFFICIENCY.
UNE-EN 60034-28:2013 Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors

Military Standards (MIL-STD), Quantitative electropherogram

DOD MIL-STD-2408 ADMIN NOTICE 3-2004 MAPPING, CHARTING& GEODESY GLOSSARY OF FEATURE AND ATTRIBUTE DEFINITIONS
DOD MIL-STD-2410 ADMIN NOTICE 1-2004 MAPPING, CHARTING, AND GEODESY REPRODUCTION AND PRINTING
DOD MIL-STD-2408 CHG NOTICE 2-1995 MAPPING, CHARTING& GEODESY GLOSSARY OF FEATURE AND ATTRIBUTE DEFINITIONS

CEN - European Committee for Standardization, Quantitative electropherogram

EN ISO 19232-5:2018 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators

工业和信息化部, Quantitative electropherogram

YB/T 5360-2020 Determination of quantitative pole figures of metallic materials by X-ray diffraction method

American Society for Testing and Materials (ASTM), Quantitative electropherogram

ASTM E81-96(2007) Standard Test Method for Preparing Quantitative Pole Figures
ASTM E81-96(2011) Standard Test Method for Preparing Quantitative Pole Figures
ASTM D8473-22 Standard Test Method for Determining the Biobased content of Liquid Hydrocarbon Fuels Using Liquid Scintillation Counting with Spiked Carbon-14
ASTM E1245-03(2008) Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
ASTM E545-99(2004) Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination
ASTM E545-19 Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination
ASTM E746-17 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
ASTM E746-18 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
ASTM E1245-95 Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
ASTM E1245-00 Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
ASTM F686-94(2006) Standard Practice for Evaluation of Image Quality Produced by Carbonless Copy Paper with an Electric or Electronic Typewriter
ASTM F686-94(1996) Standard Practice for Evaluation of Image Quality Produced by a Carbonless Copy Paper with an Electric or Electronic Typewriter
ASTM E746-02 Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM E746-93(1998) Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM E746-07(2014) Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
ASTM E1245-03 Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
ASTM E1245-03(2023) Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
ASTM E1245-03(2016) Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
ASTM E746-07 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems

Military Standard of the People's Republic of China-General Armament Department, Quantitative electropherogram

GJB 5088-2002 Resource satellite on-orbit image quality assessment method

RU-GOST R, Quantitative electropherogram

GOST 8.558-1993 State system for ensuring the uniformity of measurements. State verification schedule for means measuring temperature
GOST 25513-1982 Gear testers. Conventional designations. Terms and definitions
GOST 8.024-2002 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring density
GOST 8.024-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring density of liquid
GOST 8.025-1996 State system for ensuring the uniformity of measurements. State verification schedule for means measuring viscosity of liquids
GOST 8.025-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring kinematic viscosity of liquid
GOST R ISO 4967-2015 Steel. Determination of content of nonmetallic inclusions. Micrographic method using standard diagrams
GOST R 52633.6-2012 Information protection. Information protection technology. Requirements for fixing compliance between the captured biometric image and the «Owner» biometric image
GOST 8.026-1996 State system for ensuring the uniformity of measurements. State verification schedule for means measuring energy of combustion and specific energy of combustion (combustion calorimeters)
GOST 8.026-1979 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring quantity of heat
GOST 8.420-2002 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring straightness and flatness deviation
GOST 8.420-1981 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring straightness and flatness deviation
GOST 8.070-1996 State system for ensuring unisormity of measurements. State verification schedule for means measuring absorbed and equivalent dases and rate of absorbed and equivalent doses of photon and electron radiations
GOST 8.070-1983 State system for ensuring the uniformity measurements. State primary standard of unit of absorbed dose rate of photon ionizing radiation
GOST R 8.676-2009 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring ethanol content in gaseous and liquid media

能源部, Quantitative electropherogram

SY/T 5538-1992 Technical regulations for measurement of current status map of oil and gas transmission pipelines

Professional Standard - Press and Publication, Quantitative electropherogram

CY/T 266-2023 Book editing and proofreading quality error determination and calculation methods

BE-NBN, Quantitative electropherogram

NBN-EN 462-1-1994 Non-destructive testing - Image quality of radiographs - Part 1 : Image quality indicators (wire type) - Determination of image quality value

VN-TCVN, Quantitative electropherogram

TCVN 4212-1986 Technological documents.Rules of making control documentation.Chart of measurement

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Quantitative electropherogram

GJB/J 2739-1996 General rules for drafting of hierarchy schemes of measuring instrument for national defence

American National Standards Institute （ANSI), Quantitative electropherogram

ANSI/IEEE 1528:2003 Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques
ANSI/TIA/EIA 455-7-1992 Numerical Aperture of Step-Index Multimode Optical Fibers by Output Far-Field Radiation Pattern Measurement
ANSI/IEEE 1528a:2005 Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques - Amendment 1: Include CAD File for Human Head Model (SAM Phantom)

(U.S.) Ford Automotive Standards, Quantitative electropherogram

FORD FLTM AJ 110-1-2001 DETERMINATION OF PIGMENT CONTENT OF SOLUBLE OILS AND DRAW COMPOUNDS

Association of German Mechanical Engineers, Quantitative electropherogram

DVS 0907-3-1984 Determination of the burn-out pickup and the burn-out of submerged-arc welding flux; the flux diagram
DVS 0907-4-1984 Determination of the burn-out pickup and burn-out of submerged-arc welding flux; application of the flux diagram

PL-PKN, Quantitative electropherogram

PN-EN 4861-2021-05 E Aerospace series -- Metrological assessment procedure for kinematic fields measured by digital image correlation
PN H04304-1993 Radiographic image quality indicators for non-destructive testing. Principles and identification

Institute of Electrical and Electronics Engineers (IEEE), Quantitative electropherogram

IEEE P1528/D6, March 2013 IEEE Draft Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques
IEEE 1528-2003 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques Amendment: 2/24/2006
IEEE Std 1528-2003 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques
IEEE Std 1528-2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques - Redline
IEEE 1528-2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques
IEEE 1528/COR-2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques; Errata
SMPTE RP 17:1964 RP 17:1964 - SMPTE Recommended Practice - Photographic Recording Technique for Measuring High-Speed Camera Image Unsteadiness
IEEE 1528A-2005 Practice for determining the peak spatial-average Specific Absorption Rate (SAR) in the human head from wireless communications devices: Measurement techniques - Amendment 1: CAD file for human head model (SAM phantom)
IEEE Std 1528a-2005 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques - Amendment 1: CAD File for Human Head Model (SAM Phantom)
IEEE/ANSI N42.45-2011 American National Standard for Evaluating the Image Quality of X-ray Computed Tomography (CT)Security-Screening Systems
IEEE N42.45-2011 American National Standard for Evaluating the Image Quality of X-ray Computed Tomography (CT) Security-Screening Systems

European Committee for Electrotechnical Standardization（CENELEC）, Quantitative electropherogram

EN 61610:1996 Prints and Transparencies Produced from Electronic Sources Assessment of Image Quality
EN 61580-7:1996 Methods of Measurement for Waveguides Part 7: Graphical Method for the Determination of Waveguide Performance
EN 60034-28:2013 Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors

Professional Standard - Chemical Industry, Quantitative electropherogram

HG/T 20574-1995（条文说明） Chemical enterprise general plan transportation design engineering measurement technology regulations
HG/T 20574-1995 Chemical enterprise general plan transportation design engineering measurement technology regulations

ES-UNE, Quantitative electropherogram

UNE-EN ISO 19232-5:2019 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators (ISO 19232-5:2018)
UNE-EN 61580-7:1996 METHODS OF MEASUREMENT FOR WAVEGUIDES. PART 7: GRAPHICAL METHOD FOR THE DETERMINATION WAVEGUIDE PERFORMANCE. (Endorsed by AENOR in December of 1996.)
UNE-EN ISO 14096-1:2020 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control (ISO 14096-1:2005)
UNE-EN IEC 62464-1:2019 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters (Endorsed by Asociación Española de Normalización in April of 2019.)

US-FCR, Quantitative electropherogram

FCR FED H-08-4 VOL 3 SEC II 675.0-1988 TYPE "A" AIR TERMINAL UNIT CONTROL DIAGRAM VAV WITHOUT REHEAT & TYPE "B" AIR TERMINAL UNIT CONTROL DIAGRAM CONSTANT VOLUME REHEAT

AT-ON, Quantitative electropherogram

OENORM EN 4861-2021 Aerospace series - Metrological assessment procedure for kinematic fields measured by digital image correlation
ONORM S 5240-2-2000 Assurance of image quality in diagnostic X-ray departments - Constancy test of film processing
ONORM S 5240-6-1993 Image quaiity assurance in X-ray diagnostics - Constancy checking in computed tomography
ONORM S 5240-5-1995 Image quality assurance in X-ray diagnostics - Constancy test in dental radiographic technology
ONORM S 5240-3-1997 Image quality assurance in diagnostic X-ray departments - Tests for constancy in direct radiography
ONORM S 5240-5-2002 Image quality assurance in X-ray diagnostics - Part 5:Constancy test in dental radiographic technology
ONORM S 5240-7-1997 Image quality assurance in X-ray diagnostics - Constancy checking of mammography equipments

CH-SNV, Quantitative electropherogram

SN EN 4861-2021 Aerospace series - Metrological assessment procedure for kinematic fields measured by digital image correlation

IT-UNI, Quantitative electropherogram

UNI EN 4861-2021 Aerospace series - Metrological assessment procedure for kinematic fields measured by digital image correlation
UNI 3973-1989
UNI 6966-1971

International Electrotechnical Commission (IEC), Quantitative electropherogram

IEC 61580-7:1996 Methods of measurement for waveguides - Part 7: Graphical method for the determination of waveguide performance
IEC TS 63109:2022 Photovoltaic (PV) modules and cells - Measurement of diode ideality factor by quantitative analysis of electroluminescence images
IEC 62464-1:2018 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters

Professional Standard - Medicine, Quantitative electropherogram

YY/T 0482-2010 Magnetic resonance equipment for medical imaging.Part 1:Determination of essential image quality parameters
YY/T 0482-2022 Determination of main image quality parameters of medical magnetic resonance imaging equipment

ANSI - American National Standards Institute, Quantitative electropherogram

IT9.9-1996 Imaging Materials - Stability of Color Photographic Images - Methods for Measuring (IS&T)
IT9.9-1990 Imaging Media - Stability of Color Photographic Images - Methods for Measuring (IS&T)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Quantitative electropherogram

IEEE 1528 ERTA-2013 Errata to IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques

CU-NC, Quantitative electropherogram

NC 40-123-1-1986 Textiles. Determination of Cotton Fibers Length. Length Distribution Diagram Method by Fibers Quantity

Professional Standard - Surveying and Mapping, Quantitative electropherogram

CH/T 3009-2012 Specifications for space photogrammetric operation of 1 : 50 000 topographic maps by spaceborne synthetic aperture radar
CH/T 3011-2012 Specifications for aerophotogrammetric operation of 1 : 50 000 topographic maps by airborne synthetic aperture radar
CH/T 3016-2015 1:5000 1:10000 Topographic Map Synthetic Aperture Radar Aerial Photogrammetry Technical Regulations

Standard Association of Australia （SAA）, Quantitative electropherogram

AS ISO 20954.1:2019 Digital cameras — Measurement for image stabilization performance, Part 1: Optical systems
AS/NZS 4356.5:1996 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Determination of the detective quantum efficiency

国家市场监督管理总局、中国国家标准化管理委员会, Quantitative electropherogram

GB/T 23901.5-2019 Non-destructive testing—Image quality of radiographs—Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators
GB/T 23901.1-2019 Non-destructive testing—Image quality of radiographs—Part 1: Determination of the image quality value using wire-type image quality indicators
GB/T 23901.2-2019 Non-destructive testing—Image quality of radiographs—Part 2:Determination of the image quality value using step/hole-type image quality indicators

CZ-CSN, Quantitative electropherogram

CSN ISO 1027:1994 Radiographic image quality indicators for non-destructive testing. Principles and identification

Aerospace Industries Association/ANSI Aerospace Standards, Quantitative electropherogram

AIA/NAS NAS 1495-1968 Recommended Qualification Test Procedure for Compliance with NAS Specifications and Standard Drawings (Rev. 1)

GB-REG, Quantitative electropherogram

REG NASA-LLIS-0715-2000 Lessons Learned ?Near Field Measurement for Large Aperature Antenna Pattern Determination
REG NASA-LLIS-1243-2002 Lessons Learned - Orbiter project is currently working to reduce the number of outstanding drawing changes. The project is prioritizing the drawing updates based on criticality, complexity, and traffic. The highest priority tile drawings have been comple

CN-STDBOOK, Quantitative electropherogram

图书 A-4901 Compilation of Table Block Diagrams of the National Metrology Verification System of the People's Republic of China (2021 Revised Edition)

GOSTR, Quantitative electropherogram

GOST R 58854-2020 Photogrammetry. Requirements for creating oriented aerial images for building stereo models of built-up areas
GOST R 58777-2019 Airports. Technical means of inspection. Methodology for determination of quality indicators of recognition of illegal attachments by shadow X-ray images

CENELEC - European Committee for Electrotechnical Standardization, Quantitative electropherogram

EN 60034-28:2007 Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors