ZH
RU
ES
Normal Phase TLC
Normal Phase TLC, Total:498 items.
In the international standard classification, Normal Phase TLC involves: Iron and steel products, Construction materials, Materials for aerospace construction, Semi-manufactures of timber, Vocabularies, Wood-based panels, Protection against fire, Rubber and plastics products, Insulating materials, Products of the textile industry, Elements of buildings, Rubber, Printed circuits and boards, Surface treatment and coating, Non-ferrous metals, Domestic, commercial and industrial heating appliances, Non-textile floor coverings, Magnetic materials, Electromechanical components for electronic and telecommunications equipment, Paints and varnishes, Reinforced plastics, Products of non-ferrous metals, Insulating fluids, Pipeline components and pipelines, Medical equipment, Adhesives, Welding, brazing and soldering, Mining equipment, Products of the chemical industry, Plastics, Fuels, Packaging materials and accessories, Electronic display devices, Cans. Tins. Tubes, Electricity. Magnetism. Electrical and magnetic measurements.
Association Francaise de Normalisation, Normal Phase TLC
- NF A36-250:1987 Iron and steel. Plated sheet.
- NF P84-144/A1*NF EN 13969/A1:2007 Flexible sheetes for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
- NF P84-144*NF EN 13969:2005 Flexible sheetes for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
- NF P84-142:2005 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics.
- NF P84-142/A1:2007 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics.
- NF P84-142:2012 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics.
- NF P84-149*NF EN 14967:2006 Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics
- NF A50-452:1984 Aluminium and aluminium alloys. Coil coating strip and sheet. Characteristics.
- NF T54-301-9:2013 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 9: classification and specifications for alternative core laminates
- NF T54-301-9/IN1:2013 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 9: classification and specifications for alternative core laminates
- NF P84-147:2008 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1 : underlays for discontinuous roofing.
- XP CEN ISO/TS 80004-11:2020 Nanotechnologies - Vocabulaire - Partie 11 : nanocouche, nanorevêtement, nanofilm et termes associés
- NF C26-183-6*NF EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6 : specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
- NF C26-183-5*NF EN 60893-3-5:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5 : specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
- NF C26-183-4*NF EN 60893-3-4:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4 : specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
- NF A50-432:2007 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications.
- NF A50-432*NF EN 1396:2015 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
- NF P84-145*NF EN 13970:2005 Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
- NF P84-145/A1*NF EN 13970/A1:2007 Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
- NF C26-183-7*NF EN 60893-3-7:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7 : specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
- NF L14-321*NF EN 3552:2005 Aerospace series - Aluminium alloy 2618A - Clad sheet and strip - 0,4 mm < or = a < or = 6 mm.
- NF L14-336*NF EN 2088:2006 Aerospace series - Aluminium alloy AL-2014A - T4 or T42 - Clad sheet and strip - 0,4 mm < or = a < or = 6 mm.
- NF P84-146*NF EN 13984:2013 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
- NF L14-337*NF EN 2090:2005 Aerospaces series - Aluminium alloy 2024- - T3 - Clad sheets and strips - 0,3 mm < or = a < or = 6 mm
- NF P84-146:2005 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics.
- NF P84-146/A1:2007 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics.
- NF L14-315*NF EN 2803:2005 Aerospace series - Aluminium alloy AL-P7475- - T761 - Clad sheet and strip - 1,0 mm
- NF L14-316*NF EN 3332:2005 Aerospace series - Aluminium alloy AL-P7475- - T762 - Clad sheet and strip - 1,0
- NF T54-105:1973 Plastics sheets. Determination of dimensional variations after heating. Kaolin bed method.
- NF EN 13523-17:2019 Tôles prélaquées - Méthodes d'essai - Partie 17 : adhérence des films pelables
- NF EN ISO 10874/A1:2020 Revêtements de sol résilients, textiles et stratifiés - Classification - Amendement 1 : élimination de la classe 22+
- NF L14-202*NF EN 2087:2005 Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheet and strip - 0,4 mm < or = a < or = 6 mm
- NF L14-338*NF EN 2703:2005 Aerospaces series - Aluminium alloy AL-P2024- - T4 or T42 - Clad sheets and strips - 0,3 mm < or = a < or = 6 mm
- NF L14-204*NF EN 2092:2005 Aerospace series - Aluminium alloy AL-P7075- - T6 or T62 - Clad sheet and strip - 0,4 mm < or = a < or = 6 mm
Japanese Industrial Standards Committee (JISC), Normal Phase TLC
- JIS G 3320:1999 Coated stainless steel sheets
- JIS K 6903:1995 Laminated thermosetting decorative sheets
- JIS K 6912 AMD 2:2006 Laminated thermosetting sheets; Amendment 2
- JIS K 6912:1995 Laminated thermosetting sheets
- JIS K 6903:2007 Laminated thermosetting high-pressure decorative sheets
- JIS K 6903:2008 Laminated thermosetting high-pressure decorative sheets
- JIS C 6472:1995 Copper-clad laminates for flexible printed wiring boards (Polyester film, Polyimide film)
- JIS K 6912 AMD 1:2006 Laminated thermosetting sheets (Amendment 1)
- JIS K 6912 AMD 2 R:2006 Laminated thermosetting sheets (Amendment 2)
- JIS K 6902:1995 Testing method for laminated thermosetting decorative sheets
- JIS K 7128-3:1998 Plastics -- Film and sheeting -- Determination of tear resistance -- Part 3: Right angled tear method
- JIS C 2557:2014 Classification -- Surface insulations of electrical steel sheet, strip and laminations
- JIS C 6486:1996 Thin copper-clad laminates for multilayer printed wiring boards -- Glass fabric base, epoxy resin
- JIS G 3312:1994 Prepainted hot-dip zinc-coated steel sheets and coils
- JIS G 3321:2005 Hot-dip 55% aluminium-zinc alloy-coated steel sheets and coils
- JIS G 3317:2005 Hot-dip zinc -- 5 % aluminium alloy-coated steel sheets and coils
- JIS G 3323:2012 Hot-dip zinc-aluminium-magnesium alloy-coated steel sheet and strip
- JIS G 3323:2019 Hot-dip zinc-aluminium-magnesium alloy-coated steel sheet and strip
- JIS K 6902:2007 Testing method for laminated thermosetting high-pressure decorative sheets
- JIS G 3322:2005 Prepainted hot-dip 55 % aluminium-zinc alloy-coated steel sheets and coils
- JIS G 3322:2008 Prepainted hot-dip 55 % aluminium -- Zinc alloy-coated steel sheet and strip
- JIS G 3322:2012 Prepainted hot-dip 55 % aluminium-zinc alloy-coated steel sheet and strip
- JIS K 6744 AMD 1:2007 Polyvinyl chloride coated and laminated metal sheets (Amendment 1)
- JIS G 3318:2005 Prepainted hot-dip zinc -- 5% aluminium alloy-coated steel sheets and coils
- JIS G 3318:2008 Prepainted hot-dip zinc -- 5 % aluminium alloy-coated steel sheet and strip
- JIS G 3318:2012 Prepainted hot-dip zinc -- 5 % aluminium alloy-coated steel sheet and strip
- JIS G 3318:2019 Prepainted hot-dip zinc -- 5 % aluminium alloy-coated steel sheet and strip
- JIS G 3323 AMD 1:2017 Hot-dip zinc-aluminium-magnesium alloy-coated steel sheet and strip (Amendment 1)
- JIS K 6902 AMD 1:2008 Testing method for laminated thermosetting high-pressure decorative sheets (Amendment 1)
- JIS G 7124:2000 Continuous hot-dip aluminium/silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
- JIS G 0602:1993 Test methods for vibration-damping property in laminated damping steel sheets of constrained type
- JIS G 3322 AMD 1:2013 Prepainted hot-dip 55% aluminium -- zinc alloy-coated steel sheet and strip (Amendment 1)
- JIS G 3318 AMD 1:2013 Prepainted hot-dip zinc -- 5% aluminium alloy-coated steel sheet and strip (Amendment 1)
- JIS C 6493:1999 Base materials for printed circuits -- Thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed board
American Society for Testing and Materials (ASTM), Normal Phase TLC
- ASTM D4787-93(1999) Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
- ASTM D1038-83(2005) Standard Terminology Relating to Veneer and Plywood
- ASTM D1038-83(2000) Standard Terminology Relating to Veneer and Plywood
- ASTM D4637/D4637M-14 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
- ASTM D4637/D4637M-14e1 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
- ASTM D4637/D4637M-15 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
- ASTM A1092-15 Standard Specification for Steel Sheet, as Cold-Reduced, for Conversion to Annealed Cold-Rolled Steel Sheet, and Hot Dip Metallic-Coated Steel Sheet
- ASTM D4787-08 Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
- ASTM F1860-00 Standard Specification for Rubber Sheet Floor Covering With Backing
- ASTM F1860-03 Standard Specification for Rubber Sheet Floor Covering With Backing
- ASTM F1859-00 Standard Specification for Rubber Sheet Floor Covering Without Backing
- ASTM F1859-03 Standard Specification for Rubber Sheet Floor Covering Without Backing
- ASTM D669-92(2002) Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials
- ASTM D4145-10(2022) Standard Test Method for Coating Flexibility of Prepainted Sheet
- ASTM D823-18 Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
- ASTM D669-92(1997) Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials
- ASTM F1913-02 Standard Specification for Vinyl Sheet Floor Covering Without Backing
- ASTM E865-99e1 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
- ASTM F1913-98 Standard Specification for Vinyl Sheet Floor Covering Without Backing
- ASTM E865-03 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
- ASTM E865-08 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
- ASTM E865-12 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
- ASTM F1913-04(2014) Standard Specification for Vinyl Sheet Floor Covering Without Backing
- ASTM F1859-14 Standard Specification for Rubber Sheet Floor Covering Without Backing
- ASTM F1860-14 Standard Specification for Rubber Sheet Floor Covering With Backing
- ASTM B916-01(2013)e1 Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
- ASTM B916-01(2007) Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
- ASTM D5019-96e1 Standard Specification for Reinforced Non-Vulcanized Polymeric Sheet Used in Roofing Membrane
- ASTM D4637-08 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
- ASTM D501-89(1998) Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents
- ASTM B916-01 Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
- ASTM A630-03 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
- ASTM D4637/D4637M-15(2021) Standard Specification for EPDM Sheet Used in Single-Ply Roof Membrane
- ASTM D4637/D4637M-15(2021)e1 Standard Specification for EPDM Sheet Used in Single-Ply Roof Membrane
- ASTM B916-01(2021) Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
- ASTM D669-03 Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials
- ASTM A1003/A1003M-12 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A924/A924M-07 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
- ASTM D4601-04 Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing
- ASTM D4601/D4601M-04(2012)e1 Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing
- ASTM E2556/E2556M-09 Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
- ASTM A924/A924M-10a Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
- ASTM A924/A924M-10 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
- ASTM A924/A924M-13 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
- ASTM A924/A924M-17a Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
- ASTM A917-08 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
- ASTM D7055-04 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings
- ASTM D5019-07a Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane
- ASTM A879-00 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
- ASTM D5019-07 Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane
- ASTM A879/A879M-12 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
- ASTM D5019-05 Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane
- ASTM A879/A879M-12(2017) Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
- ASTM D609-17(2022) Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
- ASTM F1711-96(2016) Standard Practice for Measuring Sheet Resistance of Thin Film Conductors for Flat Panel Display Manufacturing Using a Four-Point Probe Method
- ASTM D4637-04 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
- ASTM D4637-03 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
- ASTM D7055-09 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings
- ASTM D4637/D4637M-12 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
- ASTM D7055-14 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings
- ASTM D4637/D4637M-13 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
- ASTM A918-00 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
- ASTM D4637/D4637M-10 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
- ASTM E1659-12 Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
- ASTM E1659-05 Standard Test Methods Coating Weight and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
- ASTM A1003/A1003M-01 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-00 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-02 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-02a Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A917-00 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
- ASTM A1003/A1003M-08 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
PL-PKN, Normal Phase TLC
- PN D97002-1985 Fece — veneev from
- PN F06100-10-1988 Furniture Testing methods tor the properties of lacquered and decorative laminated surtaces Determination ot coat thickness
CZ-CSN, Normal Phase TLC
Society of Automotive Engineers (SAE), Normal Phase TLC
- SAE AMS4012G-2014 Aluminum Sheet, Laminated, Edge Bonded
- SAE AMS4013D-1991 Aluminum Sheet, Laminated, Surface Bonded (Reaffirmed: 01 May 1995)
- SAE AMS4013E-2005 Aluminum Sheet, Laminated, Surface Bonded
- SAE AMS4013F-2007 Aluminum Sheet, Laminated Surface Bonded
- SAE AMS5036H-2001 Steel Sheet and Strip, Aluminum Coated Low Carbon
- SAE AMS6387-2003 Steel, Carbon, Laminated Sheet, Surface Bonded
- SAE AMS6387A-2008 Steel, Carbon, Laminated Sheet, Surface Bonded
- SAE AMS4077C-1976 ALUMINUM ALLOY SHEET AND PLATE, ALCLAD ONE SIDE 4.4Cu - 1.5Mg - 0.60 Mn (Clad One Side 2024-0)
- SAE AMS6345A-2002 Steel, Sheet, Strip, and Plate 0.95Cr 0.20Mo (0.28 - 0.33C) Normalized or Otherwise Heat Treated
- SAE AMS4916K-2014 Titanium Alloy Sheet, Strip, and Plate 8Al - 1Mo - 1V Duplex Annealed
- SAE AMS4916M-2022 Titanium Alloy Sheet, Strip, and Plate 8Al - 1Mo - 1V Duplex Annealed
- SAE AMS4077D-1984 ALUMINUM ALLOY SHEET AND PLATE, ALCLAD ONE SIDE 4.4Cu - 1.5Mg - 0.60Mn (Clad One Side 2024-0) Annealed
- SAE AMS4077E-1995 ALUMINUM ALLOY SHEET AND PLATE, ALCLAD ONE SIDE 4.4Cu - 1.5Mg - 0.60Mn (Clad One Side 2024-0) Annealed
- SAE AMS3614C-2011 Polycarbonate Sheet and Parts, Optical Grade, Coated
- SAE AMS6345B-2007 Steel, Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Otherwise Heat Treated UNS G41300 [Superseded: SAE AMS-S-18728B, SAE AMS-S-18728A, SAE AMS-S-18728]
- SAE AMS6345D-2015 Steel, Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Otherwise Heat Treated
- SAE AMS6345E-2020 Steel, Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Otherwise Heat Treated
- SAE AMS4919C-1994 TITANIUM ALLOY SHEET, STRIP, AND PLATE 6Al - 2Sn - 4Zr - 2Mo - 0.08Si Duplex Annealed
- SAE AMS4919J-2019 Titanium Alloy Sheet, Strip, and Plate 6Al - 2Sn - 4Zr - 2Mo - 0.08Si Duplex Annealed
- SAE AMS4048-1951 ALUMINUM ALLOY SHEET AND PLATE, ALUMINUM ALLOY COATED 5.6Zn - 2.5Mg - 1.6Cu - 0.25Cr (Alc. 75S-0)
- SAE AMS4049-1951 ALUMINUM ALLOY SHEET AND PLATE, ALUMINUM ALLOY COATED 5.6Zn - 2.5Mg - 1.6Cu - 0.25Cr (Alc. 75S-T6)
- SAE AMS4048B-1956 ALUMINUM ALLOY SHEET AND PLATE, ALUMINUM ALLOY CLAD 5.6Zn - 2.5Mg - 1.6Cu - 0.25Cr (Alc. 7075-0)
- SAE AMS4049A-1953 ALUMINUM ALLOY SHEET AND PLATE, ALUMINUM ALLOY CLAD 5.6Zn - 2.5Mg - 1.6Cu - 0.25Cr (Alc. 75S-T6)
- SAE AMS4048A-1953 ALUMINUM ALLOY SHEET AND PLATE, ALUMINUM ALLOY CLAD 5.6Zn - 2.5Mg - 1.6Cu - 0.25Cr (Alc. 75S-0)
- SAE AMS4051A-1957 ALUMINUM ALLOY SHEET AND PLATE, ALUMINUM ALLOY CLAD 6.8Zn - 2.75Mg - 2Cu - 0.3Cr (Alc X7178-0)
- SAE AMS4051-1955 ALUMINUM ALLOY SHEET AND PLATE, ALUMINUM ALLOY CLAD 6.8Zn - 2.75Mg - 2Cu - 0.3Cr (Alc. X7178-0)
- SAE AMS6953A-2022 Titanium Alloy Sheet, 6Al – 4Sn – 3Nb – 0.5Mo – 0.3Si, Duplex Annealed
- SAE AMS4465-2009 Aluminum Alloy, Clad One Side Sheet 0.6Mg 0.35Si 0.28Cu (No. 23 Brazing Sheet) As Fabricated
- SAE AMS4022A-1953 ALUMINUM ALLOY SHEET, ALUMINUM ALLOY CLAD 1Mg - 0.6Si - 0.3Cu - 0.25Cr (Alc 61S-T4)
- SAE AMS4023-1951 ALUMINUM ALLOY SHEET, ALUMINUM ALLOY CLAD 1Mg - 0.6Si - 0.3Cu - 0.25Cr (Alc 61S-T6)
- SAE AMS4023A-1953 ALUMINUM ALLOY SHEET, ALUMINUM ALLOY CLAD 1Mg - 0.6Si - 0.3Cu - 0.25Cr (Alc 61S-T6)
- SAE AMS4077F-2006 Aluminum Alloy Sheet and Plate, Alclad One Side 4.4Cu - 1.5Mg - 0.60Mn (Clad One Side 2024-0) Annealed
- SAE AMS4302B-2006 Aluminum Alloy, Laminated Sheet, Aramid Fiber Reinforced, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761), 3, 5, 7, or 9 Ply
European Committee for Standardization (CEN), Normal Phase TLC
- EN 13227:2017 Wood flooring - Solid lamparquet products
- EN 10205:1991 Cold Reduced Blackplate in Coil Form for the Production of Tinplate or Electrolytic Chromium/Chromium Oxide Coated Steel
- EN 13967:2012+A1:2017 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
- EN 13227:2002 Wood flooring - Solid lamparquet products (Incorporating corrigendum June 2007)
- EN 14967:2006 Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics
- EN 2090:2005 Aerospace series - Aluminium alloy AL-P2024 - T3 - Clad sheet and strip - 0,3 mm <= a <= 6 mm
- EN 3333:2005 Aerospace series - Aluminium alloy AL-P7475 - T762 - Sheet and strip - 0,6 mm <= a <= 6 mm
- EN 2703:2005 Aerospace series - Aluminium alloy AL-P2024 - T4 or T42 - Clad sheet and strip - 0,3 <= a <=6 mm
- EN 1396:2007 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
- EN 3552:2005 Luft- und Raumfahrt - Aluminiumlegierung AL-P2618A - T6 oder T62 - Bleche und B?nder, plattiert - 0,4 mm <= a <= 6 mm
- EN 60893-3-1:2004 Insulating materials —
Industrial rigid
laminated sheets based
on thermosetting resins
for electrical
purposes —
Part 3-1: Specifications for individual
materials — Requirements for types of
industrial rigid laminated sheets
- EN 1396:2023 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
- EN 13984:2004 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics Incorporates Amendment A1: 2006
- EN 13984:2013 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
- EN 438-9:2010 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 9: Classification and specifications for alternative core laminates (Incorporates Amendment A1: 2013)
- EN 438-9:2017 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 9: Classification and specifications for alternative core laminates
- CEN ISO/TS 80004-11:2020 Nanotechnologies - Vocabulary - Part 11: Nanolayer, nanocoating, nanofilm, and related terms (ISO/TS 80004-11:2017)
- EN 13859-1:2005 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing Incorporates Amendment A1: 2008
- EN 1013-2:1998 Light Transmitting Profiled Plastic Sheeting for Single Skin Roofing - Part 2: Specific Requirements and Test Methods for Sheets of Glass Fibre Reinforced Polyester Resin (GRP) Ratified European Text
- EN 1013-4:2000 Light Transmitting Profiled Plastic Sheeting for Single Skin Roofing - Part 4: Specific Requirements, Test Methods and Performance of Polycarbonate (PC) Sheets
- EN 438-5:2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
- EN 4102:2005 Aerospace serie - Aluminium alloy AL-P2219 - T81 - Clad sheet and strip - 0,5 mm <= a <= 6 mm
- EN 2803:2005 Aerospace series - Aluminium alloy AL-P7475 - T761 - Clad sheet and strip - 1 mm <= a <= 6 mm
- EN 14693:2006 Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of bitumen sheets during application of mastic asphalt
- EN 14693:2017 Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of bitumen sheets during application of mastic asphalt
- EN 1013-5:2000 Light Transmitting Profiled Plastic Sheeting for Single Skin Roofing - Part 5: Specific Requirements, Test Methods and Performance of Polymethylmethacrylate (PMMA) Sheets
- EN 438-9:2010+A1:2013 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 9: Classification and specifications for alternative core laminates
- EN 4099:2005 Aerospace series - Aluminium alloy AL-P2219 - T6 or T62 - Clad sheet and strip - 0,5 mm <= a <= 6 mm
RU-GOST R, Normal Phase TLC
- GOST 99-1996 Cut veneer. Specifications
- GOST 99-1989 Cut veneer. Specifications
- GOST R IEC 60893-3-2-2002 Industrial rigid laminated sheets. Requirements for rigid laminated sheets based on epoxide resins. Specifications
- GOST 13863-1989 Laminated stich-bonded sheets for technical use. Specifications
- GOST 30246-2016 Continuously rolled shett steel with paint coating for building. Specifications
- GOST 19689-1980 Thin-layed glassreinforced plastics electrical heating elements. General technical requirements
- GOST 3916.1-1996 Plywood with outer layers of deciduous veneer for general use. Specifications
- GOST 3916.2-1996 Plywood with outer layers of coniferous veneer for general use. Specifications
- GOST 3916.2-1989 Plywood with outer layers of coniferous veneer for general use. Specifications
- GOST 3916.1-2018 Plywood for general use with outer layers of deciduous veneer. Specifications
- GOST 3916.2-2018 Plywood for general use with outer layers of coniferous veneer. Specifications
- GOST 20966-1975 Laminated wood plastic, type DSP-B-a. Specifications
- GOST 21789-1976 Thin-layered glassreinforced plastics electrical heating elements for the voltage of 220 and 27 V. Construction and sizes
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Normal Phase TLC
YU-JUS, Normal Phase TLC
- JUS N.R7.033/1-1989 Printed circuits. Thin epoxide woven glass fabric copper-cald laminated sheet, general purpose grade, or use in the muitilayer printed board. Specifications. Amendmenfa
- JUS N.R7.034/1-1989 Printed circuits. Thin epoxide vvoven glass fabric copper-clad laminated sheet of defined flammability, or use in the multilayer printed boards. Specifications. Amendments
- JUS N.R7.025/1-1989 Printed circuits. Epoxide vvoven glass fabric copper-clad laminatedsheet, general purpose grade. Speci- ications. Amendments
- JUS U.J6.087/1-1989 Determination of dynamic modu/us of elasticity of resilient layers in floating floors. Amendments
- JUS N.R7.033-1987 Printed circuits. Thin epoxide vvoven glass fabric cooper-clad laminated sheet general purpose grade, oruse in the multilayer printed board. Specifications.
- JUS N.R7.034-1987 Printed circuits. Thin epoxide woven glass fabric cooper-clad laminated sheet of defined flammability, oruse i'n the multilayerprinted boards. Specifications
TH-TISI, Normal Phase TLC
- TIS 50-2005 Hot.dip zinc.coated cold.rolled steel coil, sheet and corrugated sheet
- TIS 2183-2004 Single cold reduced blackplate coil strip and sheet for tin plating or chromium/chromium oxide coating
- TIS 2184-2004 Double cold reduced blackplate coil strip and sheet for tin plating or chromium/chromium oxide coating
- TIS 2223-2005 Electrolytic zinc.coated cold.rolled steel coil, strip and sheet
- TIS 2228-2005 Hot.dip aluminium/zinc.coated steel sheet of commercial, drawing and structural qualities
International Organization for Standardization (ISO), Normal Phase TLC
- ISO 5001:2007 Cold-reduced carbon steel sheet for vitreous enamelling
- ISO 5001:2012 Cold-reduced carbon steel sheet for vitreous enamelling
- ISO 7209:2023/AWI Amd 1:2023 Titanium and titanium alloys — Plate, sheet and strip — Technical delivery conditions — Amendment 1
- ISO 2428:1974 Plywood; Veneer plywood with rotary cut veneer for general use; Classification by appearance of panels with outer veneers of birch
- ISO 2427:1974 Plywood; Veneer plywood with rotary cut veneer for general use; Classification by appearance of panels with outer veneers of beech
- ISO 2430:1974 Plywood; Veneer plywood with rotary cut veneer for general use; Classification by appearance of panels with outer veneers of poplar
- ISO 14788:2005 Continuous hot-dip zinc-5% aluminium alloy coated steel sheet
- ISO 4586-7:2018 High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Classification and specifications for design laminates
- ISO 4586-7:2015 High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Classification and specifications for design laminates
- ISO 2429:1974 Plywood; Veneer plywood with rotary cut veneer for general use; Classification by appearance of panels with outer veneers of broadleaved species of tropical Africa
- ISO 4998:2011 Continuous hot-dip zinc-coated carbon steel sheet of structural quality
- ISO 14788:1998 Continuous hot-dip zinc-5 %/aluminium alloy coated steel sheets and coils
- ISO 4586-8:2018 High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 8: Classification and specifications for alternative core laminates
- ISO 4586-8:2015 High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 8: Classification and specifications for alternative core laminates
- ISO 4586-2:2018 High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
- ISO 4586-2:2015 High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties
- ISO/TS 80004-11:2017 Nanotechnologies — Vocabulary — Part 11: Nanolayer, nanocoating, nanofilm, and related terms
- ISO 4586-1:2018 High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information
- ISO 4586-1:2015 High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 1: Introduction and general information
- ISO 4586-4:2015 High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
- ISO 4586-4:2018 High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
- ISO 4586-2:2004 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties
- ISO 19993:2007 Timber structures - Glued laminated timber - Face and edge joint cleavage test
- ISO 4586-5:2018 High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
- ISO 4586-5:2015 High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
- ISO 4586-1:2004 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 1: Classification and specifications
- ISO 4586-6:2018 High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater
- ISO 4586-6:2015 High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater
- ISO 15106-4:2008 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 4: Gas-chromatographic detection sensor method
- ISO 5002:2008 Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
- ISO 5002:2013 Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
- ISO 10033-1:2011/CD Amd 1 Laminated Veneer Lumber (LVL) — Bonding quality — Part 1: Test methods — Amendment 1
- ISO 4586-3:2015 High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
- ISO 4586-3:2018 High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
- ISO 4586-2:1995 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties
- ISO 4586-2:1988 Decorative high-pressure laminates (HPL); sheets based on thermosetting resins; part 2: determination of properties
- ISO 4586-2:1997/Amd 3:2002 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties; Amendment 3: Lightfastness
HU-MSZT, Normal Phase TLC
British Standards Institution (BSI), Normal Phase TLC
- BS EN 13969:2005 Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
- BS EN 13969:2004(2007) Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
- BS CP 143-1:1958 Code of practice for sheet roof and wall coverings - Aluminium, corrugated and troughed
- BS EN 13969:2004 Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
- BS EN 13967:2004 Flexible sheets for waterproofing-Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet-Definitions and characteristics
- BS CP 143-10:1973 Code of practice for sheet roof and wall coverings - Code of practice for sheet roof and wall coverings - Galvanized corrugated steel - Metric units
- BS EN 15206:2007 Vitreous and porcelain enamels. Production of specimens for testing enamel on sheet steel, sheet aluminium and cast iron
- BS EN 13859-1:2010 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Underlays for discontinuous roofing
- BS EN 13859-1:2005 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Underlays of discontinuous roofing
- BS EN 13859-1+A1:2005 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Underlays for discontinuous roofing
- BS CP 143-5:1964 Code of practice for sheet roof and wall coverings - Zinc
- BS ISO 14788:2011 Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet
- PD CEN ISO/TS 80004-11:2020 Nanotechnologies. Vocabulary. Nanolayer, nanocoating, nanofilm, and related terms
- BS EN 438-9:2010 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Classification and specifications for alternative core laminates
- BS EN 438-9:2010+A1:2013 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for alternative core laminates
- BS EN 13859-2:2010 Flexible sheets for
waterproofing.Definitions
and characteristics of underlays.
Part 2: Underlays for walls
- BS EN 13859-2:2005 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Underlays for walls
- BS EN 13859-2:2004 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
- BS EN 60893-3-1:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for types of industrial rigid laminated sheets
- BS EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
- BS EN 60893-3-4:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
- BS EN 60893-3-5:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
- BS EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
- BS EN 60893-3-4:2004+A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
- BS ISO 4998:2011 Continuous hot-dip zinc-coated carbon steel sheet of structural quality
- BS EN 14967:2006 Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics
- BS EN 14967:2009 Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics
- BS EN 14967:2006(2009) Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics
- BS EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
- BS EN 45502-2-1:2003 Active implantable medical devices - Part 2-1:Particular requirements for active implantable medical devices intended to treat bradyarrhythmia (cardiac pacemakers)
- BS EN 438-7:2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
- BS EN 2090:2005 Aluminium alloy AL-P2024-T3 - Clad sheet and strip - 0,3 mm a 6 mm
- BS ISO 16163:2012 Continuously hot-dipped coated steel sheet products. Dimensional and shape tolerances
- BS EN 60893-3-7:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on polymide resins
- BS ISO 15106-4:2009 Plastics. Film and sheeting. Determination of water vapour transmission rate. Gas-chromatographic detection sensor method
- BS ISO 15106-4:2008 Plastics - Film and sheeting - Determination of water vapour transmission rate - Gas-chromatographic detection sensor method
- BS EN 14909:2012 Flexible sheets for waterproofing. Plastic and rubber damp proof courses. Definitions and characteristics
- BS EN 14909:2006 Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
- BS EN 1396:2007 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
- BS CP 143-12:1970 Code of practice for sheet roof and wall coverings - Code of practice for sheet roof and wall coverings - Copper - Metric units
- BS CP 143-15:1973 Code of practice for sheet roof and wall coverings - Code of practice for sheet roof and wall coverings - Aluminium - Metric units
- BS EN 1396:2015 Aluminium and aluminium alloys. Coil coated sheet and strip for general applications. Specifications
- BS ISO 4586-4:2018 High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for compact laminates of thickness 2 mm and greater
- BS EN 13970:2004(2007) Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
- BS EN 13970:2005 Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
- BS EN 13970:2004 Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
- BS EN 2703:2005 Aluminium alloy AL-P2024-T4 or T42 - Clad sheet and strip - 0,3 mm a 6 mm
- BS EN 3552:2005 Aerospace series - Aluminium alloy AL-P2618A-T6 or T62 - Clad sheet and strip - 0,4 mm a 6 mm
- BS EN 4099:2005 Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Clad sheet and strip - 0,5 mm a 6 mm
- BS EN 438-5:2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Classification and specifications for flooring grade laminates less than 2mm thick intended for bonding to supporting substrates
- BS EN 13984:2004+A1:2006 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
- BS EN 13984+A1:2005 Flexible sheets for waterproofing. Plastic and rubber vapour control layers. Definitions and characteristics
- BS 1133-21:1991 Packaging code - Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials
- BS 8219:2001 Installation of sheet roof and wall coverings. Profiled fibre cement. Code of practice
- BS EN 13984:2013 Flexible sheets for waterproofing. Plastic and rubber vapour control layers. Definitions and characteristics
- BS EN 13984:2004 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
- BS 8219:2001+A1:2013 Installation of sheet roof and wall coverings. Profiled fibre cement. Code of practice
- BS EN 1013-4:2000 Light transmitting profiled plastic sheeting for single skin roofing - Specific requirements, test methods and performance of polycarbonate (PC) sheets
- BS EN 2803:2005 Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip - 1,0 mm a 6 mm
- BS EN 4102:2005 Aerospace series - Aluminium alloy AL-P2219-T81 - Clad sheet and strip - 0,5 mm a 6 mm
- BS EN 14693:2006 Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of bitumen sheets during application of mastic asphalt
- BS EN 60893-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Methods of test
- BS EN 438-6:2005 Decorative high-pressure laminates (HPL) sheets based on thermosetting resins - Classification and specifications for exterior-grade compact laminates of thickness 2mm and greater
- BS EN 61249-2-7:2002 Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad
- BS EN 2087:2005 Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheet & strip 0,4 mm a 6 mm
German Institute for Standardization, Normal Phase TLC
- DIN EN 13969:2007 Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics English version of DIN EN 13969:2007-03
- DIN EN 16511:2019 Loose-laid panels - Semi-rigid multilayer modular floor covering (MMF) panels with wear resistant top layer (includes Amendment :2019)
- DIN 52129:1993 Uncoated bitumen saturated sheeting; definition, designation, requirements
- DIN EN 14967:2006 Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics English version of DIN EN 14967:2006-08
- DIN EN 10205:1992 Cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel; german version EN 10205:1991
- DIN CEN ISO/TS 80004-11:2020-11 Nanotechnologies - Vocabulary - Part 11: Nanolayer, nanocoating, nanofilm, and related terms (ISO/TS 80004-11:2017); German version CEN ISO/TS 80004-11:2020 / Note: To be replaced by DIN EN ISO 80004-1 (2021-10).
- DIN 22100-6:1993 Articles and materials from synthetic for use in underground mines; sheeting, coated/uncoated tissue, brattice materials and lagging mats; safety requirements, testing, marking
- DIN EN 13970:2005 Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics; German version EN 13970:2004
- DIN EN 13970/A1:2007 Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics; English version of DIN EN 13970/A1:2007-02
- DIN 22100-6:2010 Articles and materials from synthetic for use in underground mines - Part 6: Sheeting, coated/uncoated tissue, brattice materials and lagging mats - Safety requirements, testing, marking
- DIN EN 14915:2020 Solid wood panelling and cladding - Characteristics, requirements and marking (includes Amendment :2020)
- DIN EN 438-2:2019 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties (includes Amendment A1:2018)
- DIN EN 1396:2022 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications; German and English version prEN 1396:2022
- DIN EN 438-9:2010 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 9: Classification and specifications for alternative core laminates; German version EN 438-9:2010
- DIN 16937:1986 Plasticized polyvinyl chloride (PVC-P) waterproofing sheet compatible with bitumen; requirements
- DIN EN 13967:2012 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics; German version EN 13967:2012
- DIN EN 13984/A1:2007 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics; German version EN 13984:2004/A1:2006
- DIN 18532-5:2017 Waterproofing of concrete areas trafficable by vehicles - Part 5: Waterproofing comprising a layer of polymerized bitumen sheet in conjunction with a single synthetic or elastomer sheeting
- DIN EN 2703:2006 Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Clad sheet and strip - 0,3 mm ≤ a ≤ 6 mm; German and English version EN 2703:2005
- DIN EN 2092:2006 Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 2092:2005
- DIN EN 3552:2006 Aerospace series - Aluminium alloy AL-P2618A-T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 3552:2005
- DIN 16938:1986 Plasticized polyvinyl chloride (PVC-P) waterproofing sheet incompatible with bitumen; requirements
- DIN EN 2803:2005 Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip - 1,0 mm a 6 mm; German and English version EN 2803:2005
UNKNOWN, Normal Phase TLC
Professional Standard - Ferrous Metallurgy, Normal Phase TLC
SAE - SAE International, Normal Phase TLC
- SAE AMS4255-1990 ALUMINUM ALLOY SHEET@ CLAD ONE SIDE 0.6Mg - 0.35Si - 0.28Cu (No. 21 Brazing Sheet) as Fabricated
- SAE AMS4063F-2019 Aluminum Alloy@ Clad One Side@ Sheet 1.25Mn - 0.12Cu (No. 11-0 Brazing Sheet) Annealed (UNS A83003)
- SAE AMS6345-1996 Steel@ Sheet@ Strip@ and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Otherwise Heat Treated (UNS G41300)
- SAE AMS4052-1955 ALUMINUM ALLOY SHEET AND PLATE@ ALUMINUM ALLOY CLAD 6.8Zn - 2.75Mg - 2Cu - 0.3Cr (Alc. X7178-T6)
- SAE AMS6953-2018 Titanium Alloy Sheet 6Al – 4Sn – 3Nb – 0.5Mo – 0.3Si@ Duplex Annealed (UNS R56643)
- SAE AMS-S-7952-1998 Steel@ Sheet and Strip@ Uncoated@ Carbon (1020 and 1025) (Aircraft Quality)
- SAE AMS4022-1951 Aluminum Alloy Sheet@ Aluminum Alloy clad 1Mg - 0.6Si - 0.3Cu - 0.25Cr (Alc 61S-T4)
- SAE AMS4021A-1953 ALUMINUM ALLOY SHEET@ ALUMINUM ALLOY CLAD 1Mg - 0.6Si - 0.3Cu - 0.25Cr (Alc 61S-0)
- SAE AMS-S-7952A-2002 Steel@ Sheet and Strip@ Uncoated@ Carbon (1020 and 1025) (Aircraft Quality)
- SAE AMS4047A-1954 ALUMINUM ALLOY SHEET AND PLATE@ ALUMINUM ALLOY CLAD@ ROLL TAPERED 5.6Zn - 2.5Mg - 1.6Cu - 0.25Cr (Alc75S-T6)
- SAE AMS4047B-1981 ALUMINUM ALLOY SHEET AND PLATE@ ALUMINUM ALLOY CLAD@ ROLL TAPERED 5.6Zn - 2.5Mg - 1.6Cu - 0.25Cr (Alc 7075-T6)
- SAE AMS4047-1953 ALUMINUM ALLOY SHEET AND PLATE@ ALUMINUM ALLOY CLAD@ ROLL TAPERED 5.6Zn - 2.5Mg - 1.6Cu - 0.25Cr (Alc 75S-T6)
- SAE AMS4047B-1957 ALUMINUM ALLOY SHEET AND PLATE@ ALUMINUM ALLOY CLAD@ ROLL TAPERED 5.6Zn - 2.5Mg - 1.6Cu - 0.25Cr (Alc 7075-T6)
CEN - European Committee for Standardization, Normal Phase TLC
- EN 10336:2007 Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming - Technical delivery conditions
- EN 13967:2012 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics (Incorporates Amendment A1: 2017)
- EN 13967:2004 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics (Incorporates Amendment A1: 2006)
- EN 14783:2006 Fully supported metal sheet and strip for roofing@ external cladding and internal lining - Product specification and requirements
CO-ICONTEC, Normal Phase TLC
IPC - Association Connecting Electronics Industries, Normal Phase TLC
Standard Association of Australia （SAA）, Normal Phase TLC
- AS 4040.4:2006 Methods of testing sheet roof and wall cladding - Resistance to impact (sandbag) - Sheet roof materials
- AS 1562.1:1992 Design and installation of sheet roof and wall cladding - Metal
- AS 1562.1:1992/Amdt 3:2012
- AS 1562.1:1992/Amdt 1:1993
- AS 1562.1:1992/Amdt 2:1995
- AS 1562.3:2006 Design and installation of sheet roof and wall cladding - Plastic
- AS 4040.1:1992 Methods of testing sheet roof and wall cladding - Resistance to concentrated loads
- AS 4040.1:1992 (R2016) Methods of testing sheet roof and wall cladding - Resistance to concentrated loads
- AS/NZS 4040.5:1996 Methods of testing sheet roof and wall cladding - Resistance to impact (sandbag) for wall boards
- AS 4040.3:1992 Methods of testing sheet roof and wall cladding - Resistance to wind pressures for cyclone regions
- AS 4040.3:2018 Methods of testing sheet roof and wall cladding - Resistance to wind pressures for cyclone regions
- AS 4040.2:1992 Methods of testing sheet roof and wall cladding - Resistance to wind pressures for non-cyclone regions
- AS 4040.2:1992+A1:2018 Methods of testing sheet roof and wall cladding - Resistance to wind pressures for non-cyclone regions
- AS/NZS 1580.107.2:1995 Paints and related materials - Methods of test - Determination of wet film thickness from wet film mass
- AS 1580.107.1:2004 Paints and related materials - Methods of test - Determination of wet film thickness from dry film mass
- AS 4040.0:1992 Methods of testing sheet roof and wall cladding - Introduction, list of methods and general requirements
- AS 4040.0:1992 (R2016) Methods of testing sheet roof and wall cladding - Introduction, list of methods and general requirements
SE-SIS, Normal Phase TLC
US-RWMA, Normal Phase TLC
- RWMA BULL 30 Effect of Zinc Coatings on Resistance Seam Welding of Sheet Steel
AWS - American Welding Society, Normal Phase TLC
工业和信息化部, Normal Phase TLC
- QB/T 5507-2020 Film laminated metal decorative panels for household appliances
ESDU - Engineering Sciences Data Unit, Normal Phase TLC
- ESDU 81047 C-1994 Buckling of flat rectangular plates (isotropic@ orthotropic and laminated composite plates and sandwich panels).
- ESDU 83036 B-1992 Natural frequencies of rectangular@ specially orthotropic laminated plates.
- ESDU 83036 B-2012 Natural frequencies of rectangular@ specially orthotropic laminated plates
- ESDU 83036 B-2011 Natural frequencies of rectangular@ specially orthotropic laminated plates
- ESDU 88032 A-1991 Wrinkling of sandwich panel face plates (isotropic face plates on orthotropic cores@ in-plane loading or bending).
AASHTO - American Association of State Highway and Transportation Officials, Normal Phase TLC
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Normal Phase TLC
- GB/T 12630-1990 Thin epoxide woven glass fabric copper-clad laminated sheet,general purpose grade,for use in the fabrication of multilayer printed boards
- GB/T 12629-1990 Thin epoxide woven glass fabric copper clad laminated sheet of defined flammability, for use in the fabrication of multilayer printed boards
- GB/T 5258-1995 Test method for compressive properties of fiber reinforced plastic thin laminates
- GB/T 16317-1996 Thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards
- GB/T 24800.2-2009 Determination of 41 glucocorticoids in cosmetics by LC-MS-MS and TLC method
TR-TSE, Normal Phase TLC
- TS 3108-1978 PLYVVOOD - VENEER PLYVVOOD WITH ROTARY CUT VENEER FOR GENERAL USE - CLASS1FICATION BY APPEARANCE OF PANELS WITH OUTER VENEERS OF POPLAR
- TS 3107-1978 Plywood - Veneer Plywood With Rotary Cut Veneer For General Use - Classification By Appearance Of Panels With Outer Veneers Of Beech
CENELEC - European Committee for Electrotechnical Standardization, Normal Phase TLC
- EN 60249-2-11:1994 Base Materials for Printed Circuits Part 2: Specifications Specification No. 11: Thin Epoxide Woven Glass Fabric Copper-Clad Laminated Sheet@ General Purpose Grade@ for Use in the Fabricaiton of Multilayer Printed Boards (Incorporates Amendments A2: 1994@
- EN 60249-2-12:1994 Base Materials for Printed Circuits - Part 2-12: Specifications - Specification No. 12: Thin Epoxide Woven Glass Fabric Copper-Clad Laminated Sheet of Defined Flammability@ for Use in the Fabrication of Multilayer Printed Boards (Incorporates Amendments A
- EN 60249-2-17:1993 Base Materials for Printed Circuits Part 2: Specifications Specification No. 17: Thin Polyimide Woven Glass Fabric Copper-Clad Laminated Sheet of Defined Flammability for Use in the Fabrication of Multilayer Printed Boards (Incorporates Amendments A1: 199
- EN 60893-3-1:1994 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 1: Types of Industrial Rigid Laminated Sheets
Professional Standard - Commodity Inspection, Normal Phase TLC
- SN/T 1733.8-2006 Rules for the inspection of non-prime steel materials.Part 8:Tinplates
- SN/T 1733.9-2006 Rules for the inspection of non-prime steel materials.Part 9:Zinc-coated steel sheets and coils
AT-ON, Normal Phase TLC
- ONORM EN 438-1-1993 Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Specification
- ONORM EN 438-2-1992 Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Determination of properties
- ONR CEN ISO/TS 80004-11:2020 Nanotechnologies - Vocabulary - Part 11: Nanolayer, nanocoating, nanofilm, and related terms (ISO/TS 80004-11:2017)
Canadian Standards Association (CSA), Normal Phase TLC
- CSA A123.2-03-2003 Feutre ?toiture rev阾u de bitume deuxi鑝e 閐ition; Mise ?jour No. 1: 02/2006
Korean Agency for Technology and Standards (KATS), Normal Phase TLC
- KS C 2134-1996(2021) Testing method for dissipation factor and permittivity parallel with laminations of laminated sheet and plate materials
- KS M ISO 4586-1-2012(2022) High-pressure decorative laminates－Sheets made from thermosetting resins－Part 1：Classification and specifications
- KS C IEC 60893-3-6:2022 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-6: Specifications for individual materials — Requirements for rigid laminated sh
- KS C 6515-2002 THIN COPPER - CLAD LAMINATES FOR MULTILAYER PRINTED WIRING BOARDS - GLASS FABRIC BASE, MODIFIED OR UNMODIFIED POLYIMIDE RESIN
- KS C 6515-1997 THIN COPPER - CLAD LAMINATES FOR MULTILAYER PRINTED WIRING BOARDS - GLASS FABRIC BASE, MODIFIED OR UNMODIFIED POLYIMIDE RESIN
- KS C 2134-1996(2016) Testing method for dissipation factor and permittivity parallel with laminations of laminated sheet and plate materials
- KS M ISO 4586-1:2012 High-pressure decorative laminates－Sheets made from thermosetting resins－Part 1：Classification and specifications
- KS C 6461-2002 THIN COPPER-CLAD LAMINATES FOR MULTILAYER PRINTED CIRCUITS (GLASS FABRIC BASE, EPOXY RESIN)
- KS C 6461-1990 THIN COPPER-CLAD LAMINATES FOR MULTILAYER PRINTED CIRCUITS (GLASS FABRIC BASE, EPOXY RESIN)
- KS C IEC 61249-5-1-2003(2019)
- KS C IEC 60249-2-11-2002(2022) Base materials for printed circuits－Part 2：Specifications No.11：Thin epoxide woven glass fabric copper－clad laminated sheet, general purpose grade, for use in the fabrication of multilayer printed boa
- KS C IEC 60249-2-11-2002(2017) Base materials for printed circuits－Part 2：Specifications No.11：Thin epoxide woven glass fabric copper－clad laminated sheet, general purpose grade, for use in the fabrication of multilayer printed boa
- KS C IEC 61061-3-1:2022 Non-impregnated densified laminated wood for electrical purposes —Part 3: Specifications for individual materials —Sheet 1: Sheets produced from beech veneer
- KS C IEC 60249-2-12-2002(2012) Base materials for printed circuits－ Part 2：Specifications－ Specification No.12：Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of multi
Defense Logistics Agency, Normal Phase TLC
- DLA A-A-59504 VALID NOTICE 1-2006 PLASTIC SHEET (SHEETING), PRESSURE SENSITIVE ADHESIVE COATED, CELLULOSE ACETATE, TRANSPARENT
- DLA A-A-59504-2000 PLASTIC SHEET (SHEETING), PRESSURE SENSITIVE ADHESIVE COATED, CELLULOSE ACETATE, TRANSPARENT [Superseded: DLA MIL-P-46140 B CANC NOTICE 3, DLA MIL-P-46140 B VALID NOTICE 2, DLA MIL-P-46140 B, DLA MIL-P-46140 A, DLA MIL-P-46140]
Danish Standards Foundation, Normal Phase TLC
- DS/EN 438-1:1992 Decorative high-pressure laminates (HPL). Sheets based on thermosetting resins. Part 1: Specifications
- DS/EN 438-2:1992 Decorative high-pressure laminates (HPL). Sheets based on thermosetting resins. Part 2: Determination of properties
- DS/EN 1396:2007 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
- DS/EN 16284:2013 Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane
KR-KS, Normal Phase TLC
- KS C IEC 60893-3-6-2022 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-6: Specifications for individual materials — Requirements for rigid laminated sh
- KS C IEC 61061-3-1-2022 Non-impregnated densified laminated wood for electrical purposes —Part 3: Specifications for individual materials —Sheet 1: Sheets produced from beech veneer
Association of German Mechanical Engineers, Normal Phase TLC
US-FCR, Normal Phase TLC
American Society of Mechanical Engineers (ASME), Normal Phase TLC
- ASME B32.1-1952 Preferred thicknesses for uncoated thin flat metals (under 0,250 In.)
Professional Standard - Aerospace, Normal Phase TLC
- QJ 1175A-1996 X-ray photographic inspection method of fusion-welded butt joints of steel sheets
IT-UNI, Normal Phase TLC
ES-UNE, Normal Phase TLC
- UNE-CEN ISO/TS 80004-11:2020 Nanotechnologies - Vocabulary - Part 11: Nanolayer, nanocoating, nanofilm, and related terms (ISO/TS 80004-11:2017) (Endorsed by Asociación Española de Normalización in October of 2020.)
- UNE-EN 1396:2015 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
IN-BIS, Normal Phase TLC
机械工业部, Normal Phase TLC
- JB/T 6185.5-1992 16mm groove system combination clamp support adjacent solid groove square pad
Professional Standard - Public Safety Standards, Normal Phase TLC
未注明发布机构, Normal Phase TLC
- DIN EN 10214:1995 Continuously hot-dip zinc-aluminum (ZA) coated steel strip and sheet — Technical delivery conditions
ZA-SANS, Normal Phase TLC
- SANS 4586-2:1997 High-pressure decorative laminates - Sheets made from thermosetting resins Part 2: Determination of properties
- SANS 4586-1:1995 High-pressure decorative laminates - Sheets made from thermosetting resins Part 1: Classification and specifications
National Electrical Manufacturers Association（NEMA), Normal Phase TLC
- NEMA LI 6-1993 Relative Temperature Indices of Industrial Thermosetting Laminates (Reaffirm Letter)
European Committee for Electrotechnical Standardization（CENELEC）, Normal Phase TLC
- EN 60893-3-1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets
Lithuanian Standards Office , Normal Phase TLC
- LST EN 1396-2007 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
- LST CEN ISO/TS 80004-11:2020 Nanotechnologies - Vocabulary - Part 11: Nanolayer, nanocoating, nanofilm, and related terms (ISO/TS 80004-11:2017)
NZ-SNZ, Normal Phase TLC
- AS/NZS 1562.3:1996 Design and Installation of Sheet Roof and Wall Cladding Part 3: Plastic
Taiwan Provincial Standard of the People's Republic of China, Normal Phase TLC
- CNS 14824-2004 Method of test for detailed analysis of petroleum naphthas through n-nonane by capillary gas chromatography
International Electrotechnical Commission (IEC), Normal Phase TLC
- IEC 60404-1-1:2004 Magnetic materials - Part 1-1: Classification - Surface insulations of electrical steel sheet, strip and laminations
- IEC 60249-2-17/COR1:1992 Base materials for printed circuits; part 2: specifications; specification No. 17: thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards
- IEC 60249-2-17:1992 Base materials for printed circuits; part 2: specifications; specification No. 17: thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards
NEMA - National Electrical Manufacturers Association, Normal Phase TLC
- NEMA LI 6-1983 RELATIVE TEMPERATURE INDICES OF INDUSTRIAL THERMOSETTING LAMINATES (RESCINDED)
AENOR, Normal Phase TLC
- UNE-EN ISO 10113:2014 Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO 10113:2006, Corrected version 2007-08-01)
- UNE-EN 60249-2-11/A4:2001 Base materials for printed circuits -- Part 2: Specifications -- Specification No. 11: Thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, for use in the fabrication of multilayer printed boards.
- UNE-EN 16284:2013 Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane
VN-TCVN, Normal Phase TLC
- TCVN 6599-2007 Animal feeding stuffs.Semi-quantitative determination ofaflatoxin B1.Thin-layer chromatographic methods
(U.S.) Ford Automotive Standards, Normal Phase TLC
- FORD WSS-M1A325-B1-2006 STEEL, SHEET, ZINC/NICKEL, ALUMINUM RICH ORGANIC COATING ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M98D26-A-2006 LAMINATE, POLYETHYLENE (PE) FOAM, RECYCLED/POLYETHYLENE (PE) SHEET **TO BE USED WITH FORD WSS-M99P1111-A**
Indonesia Standards, Normal Phase TLC
- SNI 06-0472-1989 Test method for coating resistance of paints and related products on coated steel sheet to atmospheric influences
The American Road & Transportation Builders Association, Normal Phase TLC
- AASHTO M274-1987 Standard Specification for Steel Sheet, Aluminum-Coated (Type 2), for Corrugated Steel Pipe Twentieth Edition R(2000)
GM North America, Normal Phase TLC
- GM GM252M-2011 Coil Coated Adhesive - Sheet Stock (Issue 2; Do Not Use on New Programs; No Replacement)
AT-OVE/ON, Normal Phase TLC
- OVE EN 60763-2/A1-2021 Specification for laminated pressboard - Part 2: Methods of test (IEC 15/943/CDV) (Amendment) (english version)