ZH
RU
ES
Sealing weight loss
Sealing weight loss, Total:45 items.
In the international standard classification, Sealing weight loss involves: Construction materials, Surface treatment and coating, Rubber, Non-ferrous metals, Fluid power systems, Road vehicle systems.
CZ-CSN, Sealing weight loss
- CSN 72 1565 Cast.6-1985 Testing of brick clays. Determination of the weight loss by burning, of the water intake, apparent porosity and bulk density
Danish Standards Foundation, Sealing weight loss
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Sealing weight loss
- GB/T 8753.1-2017 Anodizing of aluminium and its alloys—Assessment of quality of sealed anodic oxidation coatings—Part 1：Measurement of the loss of mass after immersion in acid solution(s)
Professional Standard - Aviation, Sealing weight loss
- HB 5367.4-1986 Determination method for thermal oxidation weight loss of carbon graphite sealing materials
Professional Standard - Commodity Inspection, Sealing weight loss
- SN/T 4005-2013 Test methods for testing the burning behaviour of resilient filling materials used in furniture.Loss in mass
American Society for Testing and Materials (ASTM), Sealing weight loss
- ASTM C771-03(2009) Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
- ASTM C771-14(2019) Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
- ASTM C771-97 Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
- ASTM C771-03 Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
- ASTM C771-14 Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
- ASTM C792-04 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
- ASTM C792-93(1998) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
- ASTM C792-15(2020) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
- ASTM C792-23 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
- ASTM C792-15 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
- ASTM C1246-00(2006) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
- ASTM C1246-17(2022) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
- ASTM C1246-00(2012) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
- ASTM C1246-00 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
- ASTM C1246-17 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
International Organization for Standardization (ISO), Sealing weight loss
- ISO 3210:2017 Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
- ISO 2143:2010 Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment
- ISO 2143:1981 Anodizing of aluminium and its alloys; Estimation of loss of absorptive power of anodic oxide coatings after sealing; Dye spot test with prior acid treatment
- ISO 2143:2017 Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment
- ISO 3210:2010 Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution
Korean Agency for Technology and Standards (KATS), Sealing weight loss
- KS D ISO 2143:2012 Anodizing of aluminium and its alloys-Estimation of loss of absorptive power of anodic oxidation coatings after sealing-Dye-spot test with prior acid treatment
- KS D ISO 2143:2013 Anodizing of aluminium and its alloys－Estimation of loss of absorptive power of anodic oxidation coatings after sealing－Dye-spot test with prior acid treatment
British Standards Institution (BSI), Sealing weight loss
- BS EN ISO 2143:2010 Anodizing of aluminium and its alloys. Estimation of loss of absorptive power of anodic oxidation coatings after sealing. Dye-spot test with prior acid treatment CD-ROM
- BS EN 12373-7:2002 Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment
IN-BIS, Sealing weight loss
Association Francaise de Normalisation, Sealing weight loss
- NF A91-485:2010 Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution.
- NF A91-407:1981 Anodizing of aluminium and its alloys. Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution.
TR-TSE, Sealing weight loss
- TS 2675-1977 Anodizing Of Aluminium And Its Alloys - Assessment Of Sealing Quality By Measurement Of The Loss Of Mass After Immersion In Acid Solution
- TS 2676-1977 ANODIZING OP ALUMINIUM AND ITS ALLOYS - ASSESSMENT OP SEALING PUALITY BY MEASUREMENT OF THE LOSS OP MASS AFTER IMMERSION IN PHOSPHORIC - CHROMIC ACID SOLUTION
Japanese Industrial Standards Committee (JISC), Sealing weight loss
- JIS H 8683-1:2013 Anodizing of aluminium and its alloys.Estimation of loss of absorptive power of anodic oxidation coatings after sealing.Part 1: Dye-spot test with prior acid treatment
- JIS H 8683-2:2013 Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings -- Part 2: Measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution
Society of Automotive Engineers (SAE), Sealing weight loss
- SAE J1926-2-1995 Connections for General use and Fluid Power-Ports and Stud ends with ISO 725 Threads and O-Ring Sealing Part 2: Heavy-Duty (S Series) Stud Ends
SAE - SAE International, Sealing weight loss
- SAE J1926-2-2010 Connections for General use and Fluid Power-Ports and Stud ends with ISO 725 Threads and O-Ring Sealing Part 2: Heavy-Duty (S Series) Stud Ends
German Institute for Standardization, Sealing weight loss
- DIN EN ISO 2143:2010 Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2010); German version EN ISO 2143:2010
- DIN EN ISO 3210:2010 Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution (ISO 3210:2010); German version EN ISO 3210:2010
- DIN EN ISO 1179-2:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2007); Ge
European Committee for Standardization (CEN), Sealing weight loss
- EN ISO 1179-2:2013 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
- EN ISO 1179-2:2022 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2022)
- EN ISO 1179-2:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)