ZH

RU

ES

Peak purity detection method

Peak purity detection method, Total:428 items.

In the international standard classification, Peak purity detection method involves: Biology. Botany. Zoology, Farming and forestry, Analytical chemistry, Non-metalliferous minerals, Electronic tubes, Optoelectronics. Laser equipment, General methods of tests and analysis for food products, Milk and milk products, Thermodynamics and temperature measurements, Testing of metals, Power stations in general, Organic chemicals, Inorganic chemicals, Materials for the reinforcement of composites, Water quality, Quality, Air quality, Products of the chemical industry, Fluid power systems, Aircraft and space vehicles in general, Non-ferrous metals, Paints and varnishes, Paint ingredients, Conducting materials, Geology. Meteorology. Hydrology, Telecommunication systems, Bottles. Pots. Jars, Road engineering, Protection against fire, Non-destructive testing, Glass, Products of the textile industry, Cutting tools, Electrical engineering in general, Radiation measurements, Nuclear energy engineering, Elements of buildings, Machine tool systems, Shipbuilding and marine structures in general, Construction materials, Insulating materials, Pulps, Paper and board, Resistors, Electricity. Magnetism. Electrical and magnetic measurements, Textile auxiliary materials, Vocabularies, Tobacco, tobacco products and related equipment, Optics and optical measurements, Medical equipment, Wood, sawlogs and sawn timber, Wood-based panels, Metalliferous minerals, Particle size analysis. Sieving, Linear and angular measurements, Machine tools, Leather technology, Fertilizers, Mining and quarrying, Processes of the textile industry, Plastics, Ferroalloys, Special measuring equipment for use in telecommunications, Measurement of volume, mass, density, viscosity, Coals, Petroleum products in general, Adhesives, Beverages, Heat treatment, Meat, meat products and other animal produce, Tea. Coffee. Cocoa, Semiconducting materials, Shop fittings, Metrology and measurement in general, Road vehicle systems.


国家市场监督管理总局、中国国家标准化管理委员会, Peak purity detection method

  • GB/T 40174-2021 Purity detection method of reagent enzymes
  • GB/T 38786-2020 Testing method for cleanliness of magnesium and magnesium alloy ingots
  • GB/T 38898-2020 Non-destructive testing—Testing method for measuring coating bond strength using ultrasonic wave
  • GB/T 39525-2020 Test method for the fastening degree of glass curtain wall panel
  • GB/T 38947-2020 Magnetic flux density test method for magnetic separators
  • GB/T 40291-2021 Nuclear instrumentation High—purity germanium crystals for radiation detectors—Measurement methods of basic characteristics
  • GB/T 37158-2018 Non-destructive testing—Test method for measuring the maximum detectable steel thickness by industrial computed tomography(CT)
  • GB/T 39329-2020 Additive manufacturing—Test methods—Precision inspection of standard test artifacts
  • GB/T 13247-2019 Methods for sampling and testing the grain size of ferroalloys products
  • GB/T 12688.1-2019 Test method of styrene for industrial use—Part 1:Determination of purity and hydrocarbon impurities—Gas chromatography

Fujian Provincial Standard of the People's Republic of China, Peak purity detection method

Japanese Industrial Standards Committee (JISC), Peak purity detection method

  • JIS K 0555:1995 Testing methods for determination of silica in highly purified water
  • JIS K 0552:1994 Testing methods for electric conductivity in highly purified water
  • JIS K 0554:1995 Testing methods for concentration of fine particles in highly purified water
  • JIS K 0556:1995 Testing methods for determination of anions in highly purified water
  • JIS K 0519:1995 Testing method for density of high-purity hydrocarbons by bingham pycnometer
  • JIS K 0551:1994 Testing methods for total organic carbon in highly purified water
  • JIS K 0550:1994 Testing methods for detection and estimation of micro-biological contaminants in highly purified water
  • JIS K 0517:1976 Testing method for refractive index of high purity hydrocarbons
  • JIS K 0558:2002 Testing method for determination of boron in highly purified water
  • JIS K 0553:1995 Testing methods for determination of metallic elements in highly purified water
  • JIS K 0553:2002 Testing methods for determination of metallic elements in highly purified water
  • JIS K 0555 AMD 1:2009 Testing methods for determination of silica in highly purified water (Amendment 1)
  • JIS A 1306:2014 Measuring method of smoke density using light extinction method
  • JIS R 6125:2005 Testing method for density of artificial abrasives
  • JIS A 1306:1983 Measuring method of smoke density using light extinction method
  • JIS L 0875:1995 Test method for colour fastness to potting
  • JIS A 1306 AMD 1:2008 Measuring method of smoke density using light extinction method (Amendment 1)
  • JIS K 7121 AMD 1:2012 Testing methods for transition temperatures of plastics (Amendment 1)

Indonesia Standards, Peak purity detection method

  • SNI 13-3613-1994 Pure gold, Test method of purity by atomic absorption spectrophotometer apparatus
  • SNI 13-3612-1994 Pure platinum test method of purity by atomic absorption spectrophotometer apparatus
  • SNI 13-3611-1994 Test method for purity of refined silver by atomic absorption spectrophotometer apparatus
  • SNI 0288-2008 Fabrics - Test method for colour fatness - Rubbing
  • SNI 0286-2008 Fabrics - Test method for colour fastness - Bleaching with chloride
  • SNI 03-6756-2002 Test method for determination of asphalted hardening density level
  • SNI 03-6758-2002 Test method for compressive strength of asphalt mixture
  • SNI 03-6842-2002 Test method of wood hardness in the laboratory
  • SNI 03-6851-2002 Test method for structural wood panel flexibility
  • SNI 06-7129-2005 Test methods of chromium (IV) content in leather by spectrophotometers
  • SNI 03-6435-2000 Test methods for determining floor flatness and levelness using the F-number system
  • SNI 03-6826-2002 Test method for normal consitency of portland cement by vicat apparatus for civil working
  • SNI 03-6831-2002 Test method of adhering emulsion asphalt M-50 aggregate

RU-GOST R, Peak purity detection method

  • GOST 21815.15-1986 Image intensifier and image converter tubes. Method of checking the viewing area picture quality
  • GOST 8218-1989 Milk. Method of purity determination
  • GOST 12037-1981 Seed of farm crops. Methods for determination of purity and seed lot impurity
  • GOST 24484-1980 Industries purity. Compressed air methods of measuring of contamination
  • GOST R 50554-1993 Industrial purity. Filters and their elements. Testing methods
  • GOST 11279.1-1983 Organic dyes. Testing method of dyeability (concentration), shade and purity
  • GOST 24933.1-1981 Seed of flowers. Methods for determination of purity and seed lot impurity
  • GOST R 50005-1992 Lasers and solid-state laser heads. Measurement methods of peak local energy (power) density
  • GOST 30025-1993 Seeds of essential oil crops. Method for determination of purity and seed lot impurity
  • GOST R ISO 9008-2011 Glass bottles. Verticality. Test method
  • GOST 7779-1975 Silk and semi-silk fabrics and piece-goods. Norms of colour resistance and methods for its determination
  • GOST 5636-1982 Steel and alloys. Methods of detection and determination of grain size
  • GOST 21395.7-1975 Resistors variable. Test method for stop strength
  • GOST R 54850-2011 Roof windows and skylights. Metod for determination of reduced of thermal resistance
  • GOST R 54850-2011(2019) Roof windows and skylights. Metod for determination of reduced of thermal resistance
  • GOST 13527-1978 All-wool and blended piece goods and printed fabrics. Norms of colour fastness and methods for determination
  • GOST 22690-2015 Concretes. Determination of strength by mechanical methods of nondestructive testing
  • GOST R 54074-2010 Dried skimmed milk. Methods of checking fitness for cheese making
  • GOST 8.331-1999 State system for ensuring the uniformity of measurement. Distortion meters. Methods and means of verification and calibration
  • GOST 21342.2-1975 Resistors variables. Test method for flexibility of resistance changing
  • GOST 27647-1988 Veriable resistors. Test method of mechanical strength of lead screw

Heilongjiang Provincial Standard of the People's Republic of China, Peak purity detection method

Tianjin Provincial Standard of the People's Republic of China, Peak purity detection method

  • DB12/T 649-2016 SSR Molecular Marker Detection Method for the Purity of Melon Varieties
  • DB12/T 648-2016 SSR Molecular Marker Detection Method for Cucumber Variety Purity
  • DB12/T 647-2016 Detection method of SSR molecular markers for the purity of Chinese cabbage varieties

Sichuan Provincial Standard of the People's Republic of China, Peak purity detection method

  • DB51/T 1667-2013 SSR Molecular Detection Method for Purity of Hybrid Rice Varieties
  • DB51/T 2044-2015 Determination method of impurity element content in high-purity vanadium pentoxide
  • DB51/T 2045-2015 Determination method of high-purity vanadium pentoxide potassium oxide and sodium oxide content

Hubei Provincial Standard of the People's Republic of China, Peak purity detection method

  • DB42/T 800-2012 SSR detection method for purity of two-line hybrid rice varieties

Hebei Provincial Standard of the People's Republic of China, Peak purity detection method

  • DB13/T 81.26-1992 Determination method of exothermic peak peak temperature of fireworks and firecrackers
  • DB13/T 221-1994 Method for testing the purity of corn hybrids, inbred lines, and wheat seeds - protein electrophoresis
  • DB13/T 5112-2019 SSR molecular marker method
  • DB13/T 5591-2022 Rockwell hardness test method for forged (rolled) steel ball hardness
  • DB13/T 2818-2018 Spectrophotometric method for detection of asparagus saponins in asparagus juice (powder)

Beijing Provincial Standard of the People's Republic of China, Peak purity detection method

  • DB11/T 829-2011 Molecular detection method for purity and authenticity of Chinese cabbage varieties
  • DB11/T 507-2007 SSR-based Method to Assay Purity and Genuineness in Zea mays L.

Group Standards of the People's Republic of China, Peak purity detection method

  • T/GDCKCJH 053-2021 Temperature performance requirements and test method for tunnel furnace of reflow soldering & wave soldering
  • T/CEC 673.1-2022 Perfluoroisobutyronitrile Gas Purity Test Method Part 1: Gas Chromatography
  • T/GXAS 472-2023 Determination of gravity purity in sugarcane juice
  • T/CIECCPA 015-2023 Technical requirements and testing methods for high pure titanium dioxide products
  • T/YH 7007-2021 Water efficiency testing method for key water processes: pure water system
  • T/CEC 140-2017 Measurement method of sulfur hexafluoride gas purity in sulfur hexafluoride electrical equipment
  • T/WLJC 16-2018 Text practice for accuracy of globoidal cam mechanism
  • T/CSTM 00209-2020 Non-destructive testing-The electromagnetic method for measuring magnetic particle suspension concentration
  • T/ZSA 96.4-2021 Test methods for dialyzer — Part 4:Performance parameters of solute reduction ratio
  • T/ZJBX 03-2019 On-site hardness testing of metal materials D-type portable leeb hardness testing method
  • T/GDCKCJH 044-2021 On-site test methods for diameter and roundness of expanded pipe
  • T/IAWBS 010-2019 Detection method for measuring the surface Detection method for measuring the surface quality and micropipe densityof polished monocrystalline silicon carbide wafers-Laser Scattering Method
  • T/CMA JD043-2021 Method and Illustration of Uncertainty Evaluation Test Result for Vehicle Inspection Body

Jiangsu Provincial Standard of the People's Republic of China, Peak purity detection method

  • DB32/T 2260-2012 SSR Molecular Detection Method for Purity and Authenticity of Cabbage Varieties

Military Standard of the People's Republic of China-General Armament Department, Peak purity detection method

CZ-CSN, Peak purity detection method

  • CSN 57 0111 Cast.10-1979 Testing methods for casein. Determination of purity
  • CSN 42 0600 Cast.3-1975 Antimony of high parity. Methods of chemical and spectral analysis. Delermmation of arsenic by photomotric metod
  • CSN 42 0600 Cast.4-1975 Antimony of high purity. Method of chemical and spectral anaysis.Determination of sulfur by aombustion method
  • CSN 42 0600 Cast.5-1975 Antimony of high purity. Methods of chemical and spectral analysis. Dctermination of silver, bismuth. copper, iron. nickel, lead. and tin by spectral method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Peak purity detection method

  • GB/T 32186-2015 Inspection method for purity of aluminum and aluminum alloy ingots
  • GB/T 24490-2009 Test method for purity of multi-walled carbon nanotubes
  • GB/T 19495.3-2004 Detection of genetically modified organisms and derived products. Nucleic acid extraction
  • GB/T 2523-2008 Measuring method of surface roughness and peak count for cold-rolled metal sheet (strip)
  • GB/T 2523-2022 Measuring method of surface roughness, peak count and waviness for cold-rolled metal sheet and strip
  • GB/T 13293.11-1991 Higher purity copper cathode.Determination of silicon content.Molybdenum blue spectrophotometric method
  • GB/T 7962.7-1987 Colourless optical glass test methods--Examination method for extent of stria
  • GB 7962.7-1987 Colorless optical glass test method Streakness test method
  • GB/T 13293.4-1991 Higher purity copper cathode.Determination of antimony content 2-[(-5-bromo-2-pyridyl)azo]-5-diethylaminophenol spectrophotometric method
  • GB/T 22636-2008 Door leaves.Dimensions,rectangularity and flatness.Test method
  • GB/T 23900-2009 Non-destructive testing.Practice for measuring ultrasonic velocity in materials
  • GB/T 7962.8-1987 Colourless optical glass test methods--Examination method for extent of bubble
  • GB/T 22635-2008 Door leaves.Determination of the behaviour under humidity variations in successive uniform climates
  • GB/T 32190-2015 Standard practice for using flame photometric detectors in gas chromatography
  • GB/T 14634.2-2010 Test methods of rare earth three-band phosphors for fluorescent lamps.Part 2:Determination of emission dominantpeak and chromaticity
  • GB/T 13293.5-1991 Higher purity copper cathode.Determination of arsenic content.Heteropoly arsenomolybdic acid-crystal violet spectrophotometric method
  • GB/T 13247-1991 Ferroalloys-Sampling and testing methods for determination of grain Size
  • GB/T 23364.5-2009 Methods for chemical analysis of high purity indium oxide.Part 5:Determination of chlorine content.Mercuric sulfocyanide spectrophotometry
  • GB/T 12688.1-2011 Test method of styrene for industrial use—Part 1:Determination of purity and hydrocarbon impurities—Gas chromatography
  • GB/T 11200.2-2008 Test methods of high-purity sodium hydroxide.Part2:Determination of aluminium oxide content.Spectrometric method
  • GB/T 13293.6-1991 Higher purity copper cathode.Determination of phosphorus content.Heteropoly phosphato-vanadato-molybdicacid-crystal violet spectrophotometric method
  • GB/T 14074.2-1993 Densitometry method for wood adhesives and their resins
  • GB/T 14074.3-1993 Wood adhesives and their resins test method viscometry
  • GB/T 23362.5-2009 Methods for chemical analysis of high purity indium hydroxide.Part 5:Determination of chlorine content.Mercuic sulfocyanide spectrophotometry
  • GB/T 23364.2-2009 Methods for chemical analysis of high purity indium oxide.Part 2:Determination of tin content.Phenylfluorone spectrophotometry
  • GB/T 13531.4-2013 General methods on determination of cosmetics.Determination of relative density
  • GB/T 32062-2015 In-situ test method for degradation ratio of vacuum degree of vacuum glazing.Photoelastic method
  • GB/T 32212-2015 Standard practice for testing fixed-wavelength photometric detectors used in liquid chromatography
  • GB/T 23362.2-2009 Methods for chemical analysis of high purity indium hydroxide.Part 2:Determination of tin content.Phenylfluorone spectrophotometry
  • GB/T 6626.4-1986 Test methods for the characteristics of getter-mercury dispenser--Method for peel off test of getter-mercury dispenser
  • GB/T 30103.1-2013 Methods of testing for thermal performance on cold store.Part 1: Temperature and humidity testing

Professional Standard - Commodity Inspection, Peak purity detection method

  • SN/T 0803.4-1999 Oil bearing materials for import and export.Method for the inspection of type purity and their mixture
  • SN/T 2643-2010 Cultivar identification and purity detection of Thai Jasmine rice
  • SN/T 0800.17-1999 Cereals and feedstuffs for import and export.Method for the inspection of type purity and their mixture
  • SN/T 0837.1-1999 Method for the determination of purity of arsenic trioide for export
  • SN/T 0736.3-1997 Method of inspection for import and export fertilizers.Determination of granule size
  • SN/T 0481.6-1995 Methods for inspection of bauxite for export.Rapid determination of bulk density of alumina1995-09-06
  • SN/T 4237-2015 Methods of testing the filling power for inspection of import and export down and feathers.Multifunctional filling power testing apparatus method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Peak purity detection method

  • GB/T 34223-2017 Determination of the purity of ribonuclease and desoxyribonuclease
  • GB/T 34796-2017 Quantification and purity analysis of nucleic acid concentration in solution—Ultraviolet spectrophotometry
  • GB/T 33877-2017 Non-destructive testing—Test method for comparing the brightness of fluorescent penetrants
  • GB/T 13531.6-2018 General methods on determination of cosmetics—Determination of partical size
  • GB/T 14571.2-2018 Test method of ethylene glycol for industrial use—Part 2: Determination of purity and impurities—Gas chromatography
  • GB/T 33409-2016 Determination of the activity of beta-galactosidase—Spectrophotometric method
  • GB/T 35390-2017 Non-destructive testing—Test method of ammunition density by industrial computed tomography(CT)

European Committee for Standardization (CEN), Peak purity detection method

  • EN 196-6:1989 Methods of Testing Cement; Determination of Fineness
  • PD CEN/TS 16318:2012 Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
  • EN 1926:2006 Natural stone test methods - Determination of uniaxial compressive strength
  • EN 1926:1999 Natural Stone Test Methods - Determination of Compressive Strength

Xinjiang Provincial Standard of the People's Republic of China, Peak purity detection method

  • DB65/T 4316-2020 SNP Molecular Marker Method for Testing the Purity of Cotton Varieties
  • DB65/T 4166-2018 Test method for the length and strength of wool bundles of sheep wool—Quick detection of wool bundle length and strength—Body test method

American National Standards Institute (ANSI), Peak purity detection method

Korean Agency for Technology and Standards (KATS), Peak purity detection method

  • KS M 1032-2017 Testing method for refractive index of high purity hydrocarbons
  • KS M 1033-2017 Testing method for density of high-purity hydrocarbons by Bingham pycnometer
  • KS M 1033-1997 Testing method for density of high-purity hydrocarbons by Bingham pycnometer
  • KS M 0107-1993 Testing methods for concentration of fine particles in highly purified water
  • KS I 3203-2007(2012) Testing methods for determination of metallic elements in highly purified water
  • KS I 3213-2009(2019) Testing methods for concentration of fine particles in highly purified water
  • KS I 3218-2003(2018)
  • KS I 3205-2007 Testing methods for determination of anions in highly purified water
  • KS I 3205-2021 Testing methods for determination of anions in highly purified water
  • KS I 3204-2007 Testing methods for determination of silica in highly purified water
  • KS I 3203-2007 Testing methods for determination of metallic elements in highly purified water
  • KS I 3204-2021 Testing methods for determination of silica in highly purified water
  • KS I 3204-2007(2012) Testing methods for determination of silica in highly purified water
  • KS M 1033-2017(2022) Testing method for density of high-purity hydrocarbons by Bingham pycnometer
  • KS F 2596-2004 Method for measuring carbonation depth of concrete
  • KS B 4044-2007(2012) Test code for performance and accuracy of single spindle automatic lathes(sliding headstock type)
  • KS K 0698-2007 Test method for colorfastness to light:Detection of photochromism
  • KS B 4919-1995 Self-centering manually-operated chucks for machine tools-acceptance test specifications(geometrical tests)
  • KS E ISO 8542-2003(2019)
  • KS F 2597-2011 Standard test method for water penetration depth into concrete under pressure

CU-NC, Peak purity detection method

  • NC 24-63-1986 Inorganic Chemical Products. Nitrogen. Purity Determination by Orsat Anaiyzer Method
  • NC 40-140-1988 Manufacturing and Textile Industry. Determination of Defects and Impurities Content of Cotton Fibres. Testing Methods
  • NC 40-105-1986 Textiles. Methods for Determining Color Hardness. Detection and Valuation of Photocromism Testing Method

Anhui Provincial Standard of the People's Republic of China, Peak purity detection method

  • DB34/T 3308-2018 Molecular Marker Method for Detecting Purity of Two-line Hybrid Rice Seeds

Professional Standard - Aviation, Peak purity detection method

  • HB 5271-1983 Inspection methods and standards for the purity of aviation advanced high-quality steel

American Society for Testing and Materials (ASTM), Peak purity detection method

  • ASTM D2192-96(2000) Standard Test Method for Purity of Aldehydes and Ketones
  • ASTM D2192-96 Standard Test Method for Purity of Aldehydes and Ketones
  • ASTM D1015-99 Standard Test Method for Freezing Points of High-Purity Hydrocarbons
  • ASTM D2192-06 Standard Test Method for Purity of Aldehydes and Ketones
  • ASTM D2804-98 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
  • ASTM D2804-02(2007) Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
  • ASTM D2804-02 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
  • ASTM D2804-02(2012) Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
  • ASTM D3329-03(2009) Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
  • ASTM D7515-19(2023) Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
  • ASTM E928-03 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
  • ASTM E928-08(2014) Standard Test Method for Purity by Differential Scanning Calorimetry
  • ASTM D1016-99(2004)e1 Standard Test Method for Purity of Hydrocarbons from Freezing Points
  • ASTM D1016-05e1 Standard Test Method for Purity of Hydrocarbons from Freezing Points
  • ASTM D1016-05 Standard Test Method for Purity of Hydrocarbons from Freezing Points
  • ASTM D1016-99 Standard Test Method for Purity of Hydrocarbons from Freezing Points
  • ASTM D1016-05(2010) Standard Test Method for Purity of Hydrocarbons from Freezing Points
  • ASTM D1016-05(2015) Standard Test Method for Purity of Hydrocarbons from Freezing Points
  • ASTM D3362-93(2000) Standard Test Method for Purity of Acrylate Esters by Gas Chromatography
  • ASTM D3362-05 Standard Test Method for Purity of Acrylate Esters by Gas Chromatography
  • ASTM E928-19 Standard Test Method for Purity by Differential Scanning Calorimetry
  • ASTM D2804-22 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
  • ASTM D3329-03(2023) Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
  • ASTM D5060-07 Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography
  • ASTM D3329-99 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
  • ASTM D3329-03 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
  • ASTM D332-87(1997)e1 Standard Test Method for Relative Tinting Strength of White Pigments by Visual Observation
  • ASTM D5060-95(2000) Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography
  • ASTM D5060-12(2021)e1 Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography
  • ASTM D5060-06 Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography
  • ASTM D7090-04 Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography
  • ASTM D2593-93(2004)e1 Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
  • ASTM D5060-95(2000)e1 Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography
  • ASTM D7090-04(2010) Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography
  • ASTM D7090-04(2018) Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography
  • ASTM D4937-96(2021) Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography
  • ASTM D3329-03(2017) Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
  • ASTM D2593-19 Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
  • ASTM D5544-05 Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water
  • ASTM D5544-94(2004) Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water
  • ASTM D5544-94(1999)e1 Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water
  • ASTM D5544-16 Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water
  • ASTM D5544-11 Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water
  • ASTM D6071-96(2000) Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
  • ASTM D6071-96 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
  • ASTM D2593-93(1998) Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
  • ASTM D4937-96(2001) Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography
  • ASTM D5060-12 Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography
  • ASTM D2712-23 Standard Test Method for Determination of Hydrocarbon Impurities in High Purity Propylene by Gas Chromatography
  • ASTM D2593-93(2014) Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
  • ASTM D7515-09(2014) Standard Test Method for Purity of 1,3-Propanediol 40;Gas Chromatographic Method41;
  • ASTM D5542-04 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
  • ASTM D5391-99 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
  • ASTM D5391-99(2005) Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
  • ASTM D3545-06 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
  • ASTM D3545-02 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
  • ASTM D3545-95 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
  • ASTM D4937-96e1 Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography
  • ASTM D2593-93(2009) Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
  • ASTM D4937-96(2012) Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography
  • ASTM D4937-96(2006)e1 Standard Test Method forp-Phenylenediamine Antidegradants Purity by Gas Chromatography
  • ASTM D5297-95(2000) Standard Test Methods for Rubber Chemical Accelerator-Purity by High Performance Liquid Chromatography
  • ASTM D5542-94(1999)e1 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
  • ASTM D5297-95(2019) Standard Test Methods for Rubber Chemical Accelerator—Purity by High Performance Liquid Chromatography
  • ASTM D3545-06(2012) Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
  • ASTM D3545-22 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
  • ASTM D5542-16 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
  • ASTM D4937-96(2017) Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography
  • ASTM D5297-95(2023) Standard Test Methods for Rubber Chemical Accelerator—Purity by High Performance Liquid Chromatography
  • ASTM D5996-05(2009) Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
  • ASTM D5996-05 Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
  • ASTM D5297-95(2014) Standard Test Methods for Rubber Chemical Accelerator—Purity by High Performance Liquid Chromatography
  • ASTM D3893-03 Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
  • ASTM D3893-99 Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
  • ASTM D3893-03(2023) Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
  • ASTM D2593-23 Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
  • ASTM D3893-03(2009) Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
  • ASTM E77-14e1 Standard Test Method for Inspection and Verification of Thermometers
  • ASTM E77-14(2021) Standard Test Method for Inspection and Verification of Thermometers
  • ASTM D5666-95(2000) Standard Test Method for P-Phenylenediamine Antidegradants-Purity by High Performance Liquid Chromatography
  • ASTM D4517-04 Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
  • ASTM D6071-14(2022) Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
  • ASTM D6347/D6347M-05(2010) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
  • ASTM D4517-04(2009) Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
  • ASTM D3893-03(2017) Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
  • ASTM D660-93(2011) Standard Test Method for Evaluating Degree of Checking of Exterior Paints
  • ASTM D5008-07 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography
  • ASTM D2505-88(2004)e1 Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
  • ASTM D2505-88(2010) Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
  • ASTM D6071-14 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
  • ASTM D6071-06 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
  • ASTM D6071-13 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy

HU-MSZT, Peak purity detection method

US-ACEI, Peak purity detection method

Professional Standard - Electron, Peak purity detection method

  • SJ 2355.7-1983 Method of measurement for peak emission wavelength and spectral radiation bandwidth of light-emitting devices
  • SJ 2658.12-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for peak emission wavelength and spectral half width
  • SJ 2595-1985 Method for the analysis of trace phosphorous in pure SiC14--Method spectrophotometry
  • SJ/T 11011-1996 Methods of analysis for pure silver brazing for electronic components - Determination of lead (spectrophotometric-dithizone method)
  • SJ/T 11017-1996 Methods of analysis for pure silver brazing for electronic components - Determination of phosphorus (spectrophotometric phosphomolybdate method)
  • SJ/T 11014-1996 Methods of analysis for pure silver brazing for electronic components - Determination of antimony (spectrophotometric-malichite green method)
  • SJ/T 11013-1996 Methods of analysis for pure silver brazing for electronic components - Determination of cadmium (spectrophotometric-atomic absorption method)
  • SJ/T 11015-1996 Methods of analysis for pure silver brazing for electronic components - Determination of iron (spectrophotometric-O-phenanthroline method)
  • SJ/T 11012-1996 Methods of analysis for pure silver brazing for electronic components - Determination of magnesium and zinc (spectrophotometric-atomic absorption method)
  • SJ/T 11016-1996 Methods of analysis for pure silver brazing for electronic components - Determination of bismuth (spectrophotometric strychnine-potassium iodide method)
  • SJ/T 11826-2022 Online detection method of electrostatic charge density in pipeline liquids

British Standards Institution (BSI), Peak purity detection method

  • BS 7317-6:1990 Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of phosphorus and silicon by spectrophotometry
  • BS 3338-6:1961 Methods for the sampling and analysis of tin and tin alloys - Method for the determination of copper in high purity ingot tin (photometric method)
  • BS IEC 61435:2013 Nuclear instrumentation. High-purity germanium crystals for radiationdetectors. Measurement methods of basic characteristics
  • BS EN 60811-606:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Methods for determining the density
  • BS EN 1161:1997 Feather and down - Test methods - Determination of moisture content
  • BS 7317-5:1990 Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of sulphur by hydrogen sulphide evolution and spectrophotometry
  • BS 5202-17:1997 Methods for chemical analysis of tobacco and tobacco products - Determination of nicotine purity (gravimetric method using tungstosilicic acid)
  • BS EN 16318:2013+A1:2016 Fertilizers and liming materials. Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
  • BS 7317-7:1990 Methods for analysis of high purity copper cathode Cu-CATH-1 - Method for determination of lead by lanthanum hydroxide separation and atomic absorption spectrophotometry
  • BS 6049-7:1981 Methods of test for tea. Determination of alkalinity of water-soluble ash
  • BS EN ISO 17678:2010 Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method)

BR-ABNT, Peak purity detection method

PL-PKN, Peak purity detection method

  • PN Z04523-2020-12 P Air purity protection -- Determination of hydrazine in workplaces by high performance liquid chromatography with spectrophotometric detection
  • PN Z04522-2020-11 P Air purity protection -- Determination of adipic acid in workplaces by high performance liquid chromatography with spectrophotometric detection
  • PN Z04521-2020-12 P Air purity protection -- Determination of maleic anhydride in workplaces by high performance liquid chromatography with spectrophotometric detection
  • PN Z04037 Arkusz 02-1973 Air purity protection Test for chlorine etermination of chlorine in work tation by nephelometric method
  • PN A79528-07-1992 Spirit (ethyl alcohol) Methods of tests Detection of alkalinity or determination of acidity
  • PN C86010-1993 Explosives. Testing of impact sensitivity by Kast method
  • PN P50108-02-1991 Paper, board and pulps Determination of water-soluble chlorides Part 2: Method for high purity products
  • PN Z04007-05-1986 Air purity protection Tests for ozone Determination of ozone in the ambient air (imision) by spectrophotometric method
  • PN Z04157-02-1986 Air purity protection ests for calcium oxide etermination of calcium oxide in ork places by electrochemical method
  • PN BN 7301-01-1966

Professional Standard - Non-ferrous Metal, Peak purity detection method

  • YS/T 36.1-1992 Determination of Arsenic by Ag-DDC Spectrophotometric Method for High Purity Tin Chemical Analysis
  • YS/T 38.1-1992 Molybdenum Blue Spectrophotometric Method for Determination of Silicon Content by Chemical Analysis Method of High Purity Gallium
  • YS/T 35.1-1992 High Purity Antimony Chemical Analysis Method Ag-DDC Spectrophotometric Determination of Arsenic
  • YS/T 36.2-1992 Determination of Antimony Content by Malachite Green Spectrophotometric Method for Chemical Analysis of High Purity Tin
  • YS/T 34.1-1992 High Purity Arsenic Chemical Analysis Method Malachite Green Spectrophotometric Determination of Antimony
  • YS/T 981.3-2014 Methods for chemical analysis of high pure indium.Determination of silicon content.Molybdenum blue spectrophotometric method
  • YS/T 981.5-2014 Methods for chemical analysis of high pure indium.Determination of thallium content.Rhodamine B spectrophotometric method
  • YS/T 37.2-2007 High pure germanium dioxide. Determination of silicon content. Molybdenum blue spectrophotomertic method
  • YS/T 37.2-1992 Chemical analysis method of high purity germanium dioxide Molybdenum blue spectrophotometry Determination of silicon content
  • YS/T 244.2-2008 Chemical analysis methods of high purity aluminum.Part 2: Determination of silicon content by extraction-molybdenum blue photonEetrie method
  • YS/T 37.1-2007 High pure germanium dioxide. Determination of chlorine content. Mercuric sulfocyanide spectrophotometric method
  • YS/T 38.1-2009 Chemical analysis methods of high pure gallium.Part 1:Determination of silicon content.Molybdenum blue spectrophotomerty
  • YS/T 37.1-1992 High-purity germanium dioxide chemical analysis method mercury thiocyanate spectrophotometric determination of chlorine content
  • YS/T 244.7-2008 Chemical andysis methods of high purity aluminum.Part 7: Determination of cadmium content by extraction-dithizone photometric method
  • YS/T 244.8-2008 Chemical analysis methods of high purity aluminum.Part 8: Determination of indium content by extraction-crystal violet photometric method
  • YS/T 36.2-2011 Methods for chemical analysis of high-purity Tin.Part 2:Determination of antimony content.Malachite green spectrophotometry
  • YS/T 244.4-2008 Chemical analysis methods of high purity aluminum.Part 4: Determination of gallium content by butylrhodamine B photometric method
  • YS/T 63.22-2009 Carbonaceous materials used in the production of aluminium.Part 22:Determination of baking level expressed by equivalent temperature
  • YS/T 244.1-2008 Chemical analysis methods of high purity aluminum.Part 1: Determination of iron content by 1,10-phenanthroline-thiocyanate photometric method
  • YS/T 629.1-2007 Chemical analysis methods of high purity alumina.Determination of silicon dioxide.Molybdenum blue photometric method extracted with n-Amyl alcohol
  • YS/T 981.4-2014 Method for chemical analysis of high pure indium.Determination of tin content.Benzfluorenone-cetyltrimethylammonium bromide spectrophotometric method

IN-BIS, Peak purity detection method

Professional Standard - Ferrous Metallurgy, Peak purity detection method

  • YB/T 5190-2007 High pure graphite materials-Determination of chlorines content-spectrophotometric method
  • YB/T 5190-1993 Spectrophotometric determination of chlorine content in high-purity graphite materials
  • YB/T 5191-2007 High pure graphite materials-Determination of total rare earths content-spectrophotometric
  • YB/T 5191-1993 Spectrophotometric determination method of total rare earth element content in high-purity graphite materials

VE-FONDONORMA, Peak purity detection method

Professional Standard - Ocean, Peak purity detection method

Professional Standard - Post and Telecommunication, Peak purity detection method

Shandong Provincial Standard of the People's Republic of China, Peak purity detection method

  • DB37/T 339-2003 Method for Determination of Purity of Phthalic Anhydride - Differential Scanning Calorimetry (DSC)

未注明发布机构, Peak purity detection method

  • BS 6392-1:1983(2011) Testing of ethanol for industrial use — Part 1 : Method for detection of alkalinity or determination of acidity to phenolphthalein
  • BS 3338-6:1961(2011) Method for The determination of copper in high purity ingot tin (Photometric method) — Methods for the sampling and analysis oftin and tin alloys
  • BS 6319-9:1987(1999) Testing of resin compositions for use in construction — Part 9 : Method for measurement and classification of peak exotherm temperature
  • GJB 9248-2017 Optical component surface roughness detection method Interferometry

NL-NEN, Peak purity detection method

Guangdong Provincial Standard of the People's Republic of China, Peak purity detection method

YU-JUS, Peak purity detection method

  • JUS H.K8.022-1979 Testing methods for adhesives. Determination ofviscosity
  • JUS B.F8.002-1979 Asbestos. Testing of quality by dry classification, determination of purity and water content
  • JUS H.N8.151-1989 Testing of paper and board. Determination of roughness/smoothness (air leak methods). General method
  • JUS H.K8.024-1979 Wood adhesives testing methods. Determination ofshear strenght
  • JUS B.D8.402-1998 Ceramic sewer pipes - Test method and requirements - Sguareness of ends

工业和信息化部, Peak purity detection method

  • YS/T 37.2-2018 Chemical analysis method of high-purity germanium dioxide. Determination of silicon content by molybdenum blue spectrophotometry.
  • QC/T 243-2018 Flatness requirements and detection methods of automobile wheel mounting surfaces

TZ-TBS, Peak purity detection method

  • TZS 54 Pt.2-1979 Tanzania Standard Oils and fats— Sampling and test methods Part 2 Purity tests

邯郸市, Peak purity detection method

SE-SIS, Peak purity detection method

  • SIS SS IEC 692:1984 Nuclear instrumentation — Density meters utilizing ionizing radiation — Definitions and test methods
  • SIS SS IEC 370:1982 Test procedure for thermal endurance of insulating varnishes - Electric strength method

International Electrotechnical Commission (IEC), Peak purity detection method

  • IEC 61435:2013 Nuclear instrumentation - High-purity germanium crystals for radiation detectors - Measurement methods of basic characteristics

German Institute for Standardization, Peak purity detection method

  • DIN 51422-2:2004-09 Testing of mineral products - Determination of grade of purity by gaschromatography - Part 2: Cetane and 1-Methyl-naphthaline
  • DIN 51422-2:2004 Testing of mineral products - Determination of grade of purity by gaschromatography - Part 2: Cetane and 1-Methyl-naphthaline
  • DIN EN 16318:2016-07 Fertilizers and liming materials - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B); German version EN 16318:2013+A1:2016

Professional Standard - Agriculture, Peak purity detection method

  • 309药典 四部-2020 4000 Testing methods for pharmaceutical packaging materials 4008 Determination of heat seal strength
  • 305药典 四部-2020 4000 Testing methods for pharmaceutical packaging materials 4004 Determination of peel strength
  • 313药典 四部-2020 4000 Testing method for drug packaging material 4012 Density determination method for drug packaging material

Professional Standard - Light Industry, Peak purity detection method

  • QB 800-1981 Unified method for the determination of solubility of spices
  • QB 797-1981 Unified test method for spices by polarimetry

Professional Standard-Ships, Peak purity detection method

  • CB/T 3997-2008 Determination method of contaminating level by particles for marine fluid

Professional Standard - Building Materials, Peak purity detection method

  • JC/T 2664-2022 China ISO Standard Sand Grain Size Testing Method
  • JC/T 2147-2012 Determination of trace metal elements in high purity alumina by inductively coupled plasma atomic emission spectrometry

Professional Standard - Machinery, Peak purity detection method

  • JB/T 7522-2004 Ultrasonic Velocity Measurement Method for Nondestructive Testing Materials
  • JB/T 7150-1993 Main inspection items and detection methods of high-strength bolts for construction machinery
  • JB/T 7709-2007 Inspection method of microstructure, hardeness and depth of boronized layer
  • JB/T 7709-1995 Detection method of microstructure, hardness and layer depth of boronizing layer

Standard Association of Australia (SAA), Peak purity detection method

  • AS 1141.4:1996 Methods for sampling and testing aggregates Method 4: Bulk density of aggregate
  • AS 1141.5:1996 Methods for sampling and testing aggregates Method 5: Particle density and water absorption of fine aggregate

Professional Standard - Geology, Peak purity detection method

  • DZ/T 0064.43-1993 Groundwater Quality Inspection Method Titration Determination of Acidity
  • DZ/T 0064.3-1993 Determination of temperature in underground water quality inspection method
  • DZ/T 0064.4-1993 Determination of Chromaticity in Groundwater Quality Inspection Method
  • DZ/T 0064.60-1993 Spectrophotometric method for determination of nitrite radicals in groundwater quality testing

Professional Standard - Business, Peak purity detection method

GOSTR, Peak purity detection method

  • GOST ISO 17678-2015 Milk and milk products. Determination of milk fat purity by gas chromatographic analysis of triglycerides (reference method)

Association Francaise de Normalisation, Peak purity detection method

  • NF EN ISO 17678:2019 Lait et produits laitiers - Détermination de la pureté des matières grasses laitières par analyse chromatographique en phase gazeuse des triglycérides (Méthode de référence)
  • NF U42-421/IN1*NF EN 16318/IN1:2016 Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
  • NF U42-421*NF EN 16318+A1:2016 Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
  • NF U42-421:2014 Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)

Professional Standard - Environmental Protection, Peak purity detection method

  • HJ 924-2017 Technical requirements and detection methods of COD photometric rapid detector

Malaysia Standards, Peak purity detection method

  • MS 1365 Pt.2-2000 Method of test for determination of standard of fineness for precious metals: Part 2:silver and articles of silver by titrimetric(potentiometric)method

RO-ASRO, Peak purity detection method

  • STAS SR ISO 3085:1995 Iron ores. Experimental methods for checking the precision of sampling
  • STAS SR ISO 8531:1996 Manganese and chromium ores - Experimental method for checking the precision of moisture determination
  • STAS 6679/20-1986 Metal cutting machine-tools CHECKING METHODS FOR DEVIATION FROM INTERSECTION OF AXES

Professional Standard - Petroleum, Peak purity detection method

  • SY/T 6449-2000 Calibration of detecting tool and evaluating method for cementing quality
  • SY 6449-2000 Calibration and evaluation method of cementing quality detector

International Organization for Standardization (ISO), Peak purity detection method

  • ISO 13319:2000 Determination of particle size distributions - Electrical sensing zone method
  • ISO 9197-2:1990 Paper, board and pulps; determiantion of water-soluble chlorides; part 2: method for high purity products
  • ISO 20903:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results

Shaanxi Provincial Standard of the People's Republic of China, Peak purity detection method

  • DB61/T 974-2015 Method of Pavement Radar Detecting Pavement Surface Thickness

U.S. Military Regulations and Norms, Peak purity detection method

ES-UNE, Peak purity detection method

  • UNE-EN 16318:2015+A1:2016 Fertilizers and liming materials - Determination of chromium (VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)

Professional Standard - Aquaculture, Peak purity detection method

  • SC/T 9008.1-1997 Methods of testing for main heat engineering perfomance on cold storage.Temperature testing

Professional Standard - Aerospace, Peak purity detection method

  • QJ 990.3A-2011 Inspection methods of coating.Part 3:Measurement of coating thickness

National Metrological Technical Specifications of the People's Republic of China, Peak purity detection method

Inner Mongolia Provincial Standard of the People's Republic of China, Peak purity detection method

  • DB15/T 1705-2019 Detection method of isotope abundance value of "Xilinguole mutton"

UNKNOWN, Peak purity detection method

  • GB/T 32211-2015 Test Method for Variable Wavelength Photometric Detectors for Liquid Chromatography
  • GB/T 32211-2015 Test Method for Variable Wavelength Photometric Detectors for Liquid Chromatography

Professional Standard - Automobile, Peak purity detection method

  • QC/T 983-2014 Measuring method of cleanliness of automobile manual transmission assembly




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved