ZH
RU
ES

Determination of Elastic Modulus Resonance Method

Determination of Elastic Modulus Resonance Method, Total:489 items.

In the international standard classification, Determination of Elastic Modulus Resonance Method involves: Wood, sawlogs and sawn timber, Construction materials, Mining and quarrying, Technical drawings, Refractories, Products of the chemical industry, Inorganic chemicals, Rubber, Testing of metals, Ceramics, Continuous handling equipment, Conducting materials, Wood technology processes, Insulating fluids, Wood-based panels, Mechanical testing, Non-destructive testing, Paper and board, Plastics, Acoustics and acoustic measurements, Iron and steel products, Earthworks. Excavations. Foundation construction. Underground works, Powder metallurgy, Analytical chemistry, Sugar. Sugar products. Starch, Vibrations, shock and vibration measurements, Cellular materials, Raw materials for rubber and plastics, Textile fibres, Glass, Edible oils and fats. Oilseeds, Road vehicles in general, Civil engineering in general, Fibre optic communications, Crude petroleum, Adhesives, Vibration and shock with respect to human beings, Waxes, bituminous materials and other petroleum products, Fuels, Petroleum products in general, Non-ferrous metals, Surface treatment and coating, Reinforced plastics, Road engineering, Fruits. Vegetables, Insulating materials, Measurement of volume, mass, density, viscosity.

RU-GOST R, Determination of Elastic Modulus Resonance Method

GOST 16483.31-1974 Wood. Resonance method for determination of modulus of elasticity and shear and decrement vibrations
GOST 210-1975 Rubber. Method for the determination of elasticity modulus at extension
GOST R 50236-1992 Modified wood. Method for determination of modulus of elasticity in compression
GOST 16483.26-1973 Wood. Determination method of modulus of elasticity in tension along fibres
GOST 16483.27-1973 Wood. Determination method of modulus of elasticity in tension along fibres
GOST 25095-1982 Sintered hardmetals. Method of determination of elastic modulus (of Young's modulus)
GOST 31368.3-2008 Vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Part 3. Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
GOST 18336-1973 Rigid cellular plastics. Method of test for modulus of elasticity
GOST R 57603-2017 Reinforcing filler. Method for determination of tensile strength and modulus of elasticity
GOST ISO 21181-2018 Light conveyor belts. Determination of the relaxed elastic modulus
GOST R 56802-2015 Plastics. Determination of dynamic mechanical properties. Part 7. Torsional vibration. Non-resonance method
GOST R 57919-2017 Plastics. Determination of dynamic mechanical properties. Part 6. Shear vibration. Non-resonance method
GOST R 56804-2015 Plastics. Determination of dynamic mechanical properties. Part 4. Tensile vibration. Non-resonance method
GOST R ISO 10846-2-2010 Vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Part 2. Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
GOST R 56803-2015 Plastics. Determination of dynamic mechanical properties. Part 3. Flexural vibration. Resonance-curve method
GOST 9622-2016 Glued laminated wood. Methods for determination of ultimate strength and modulus of elasticity in tension
GOST 9900-2013 Glass and glass products. Methods for determination of mechanical properties. Determination of elasticity modulus at cross static bending
GOST ISO 13753-2002 Vibration and shock. Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
GOST 9550-1981 Plastics. Methods for determination of elasticity modulus at strength, compression and bending
GOST R ISO 10846-5-2010 Mechanical vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Part 5. Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
GOST R ISO 13753-1999 Mechanical vibration and shock. Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
GOST 26454-1985 Adhesives. Method for determination of elasticity modulus of adhesive in adhesive bond
GOST 31672-2012 Foodstuffs. Method of electron paramagnetic resonance for detection of radiation-treated food containing cellulose
GOST 10635-1988 Particle boards. Methods for determinining of ultimate strength and modulus of elasticity in bendind

Japanese Industrial Standards Committee (JISC), Determination of Elastic Modulus Resonance Method

JIS A 1127:2010 Methods of test for dynamic modulus of elasticity, rigidity and Poisson's ratio of concrete by resonance vibration
JIS A 1127:2001 Methods of test for dynamic modulus of elasticity, rigidity and Poisson's ratio of concrete by resonance vibration
JIS R 1602:1995 Testing methods for elastic modulus of fine ceramics
JIS A 1149:2001 Method of test for static modulus of elasticity of concrete
JIS A 1149:2010 Method of test for static modulus of elasticity of concrete
JIS A 1149:2017 Method of test for static modulus of elasticity of concrete
JIS K 7244-4:1999 Plastics -- Determination of dynamic mechanical properties -- Part 4: Tensile vibration -- Non-resonance method
JIS K 7244-6:1999 Plastics -- Determination of dynamic mechanical properties -- Part 6: Shear vibration -- Non-resonance method
JIS K 7244-5:1999 Plastics -- Determination of dynamic mechanical properties -- Part 5: Flexural vibration -- Non-resonance method
JIS K 7244-7:2007 Plastics -- Determination of dynamic mechanical properties -- Part 7: Torsional vibration -- Non-resonance method
JIS K 7244-3:1999 Plastics -- Determination of dynamic mechanical properties -- Part 3: Flexural vibration -- Resonance-curve method
JIS R 1605:1995 Testing methods for elastic modulus of fine ceramics at elevated temperature

British Standards Institution (BSI), Determination of Elastic Modulus Resonance Method

BS EN 14146:2004 Natural stone test methods - Determination of the dynamic elastic modulus of elasticity (by measuring the fundamental resonance frequency)
BS ISO 18142:2014 Carbonaceous materials for the production of primary aluminium. Baked carbon bodies. Determination of the dynamic elasticity modulus by the resonance method
BS EN 15335:2007 Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2000 °C
BS ISO 6721-12:2022 Plastics. Determination of dynamic mechanical properties - Compressive vibration. Non-resonance method
BS ISO 6721-6:2019 Plastics. Determination of dynamic mechanical properties - Shear vibration. Non-resonance method
BS ISO 6721-7:2019 Plastics. Determination of dynamic mechanical properties - Torsional vibration. Non-resonance method
BS ISO 6721-5:2019 Plastics. Determination of dynamic mechanical properties - Flexural vibration. Non-resonance method
BS EN ISO 9856:2003+A1:2012 Conveyor belts. Determination of elastic and permanent elongation and calculation of elastic modulus
BS EN ISO 9856:2016 Conveyor belts. Determination of elastic and permanent elongation and calculation of elastic modulus
BS EN ISO 10846-3:2002 Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
BS EN ISO 21181:2013 Light conveyor belts. Determination of the relaxed elastic modulus
BS EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
BS ISO 6721-4:2010 Plastics. Determination of dynamic mechanical properties Tensile vibration. Non-resonance method
BS ISO 6721-4:2008 Plastics - Determination of dynamic mechanical properties - Tensile vibration - Non-resonance method
BS ISO 6721-4:2019 Tracked Changes. Plastics. Determination of dynamic mechanical properties. Tensile vibration. Non-resonance method
BS EN ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements -Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
BS EN ISO 6721-3:1996 Plastics. Determination of dynamic mechanical properties. Flexural vibration. Resonance-curve method
BS EN ISO 6721-3:2021 Tracked Changes. Plastics. Determination of dynamic mechanical properties. Flexural vibration. Resonance-curve method
BS EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
BS ISO 17561:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
BS EN 17408:2020 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry
BS 2782-3 Method 323G:1997 Methods of testing plastics. Mechanical properties. Complex shear viscosity using a parallel-plate oscillatory rheometer
BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
BS 1881-209:1990 Testing concrete - Recommendations for the measurement of dynamic modulus of elasticity
BS 1881-121:1983 Testing concrete - Method for determination of static modulus of elasticity in compression
21/30427370 DC BS ISO 6721-12. Plastics. Determination of dynamic mechanical properties. Part 12. Compressive vibration. Non-resonance method
BS EN ISO 10565:1998 Oilseeds. Simultaneous determination of oil and water contents. Methods using pulsed nuclear magnetic resonance spectrometry
BS EN ISO 13753:2008 Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
BS EN ISO 11543:2002 Modified starch - Determination of hydroxypropyl content - Method using proton nuclear magnetic resonance (NMR) spectrometry
BS ISO 23486:2021 Metallic and other inorganic coatings. Measurement of Young's modulus of thermal barrier coatings at elevated temperature by flexural resonance method
20/30406584 DC BS EN ISO 6721-3. Plastics. Determination of dynamic mechanical properties. Part 3. Flexural vibration. Resonance-curve method
BS 7737-2:1995 Recommended methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. Resonance methods

European Committee for Standardization (CEN), Determination of Elastic Modulus Resonance Method

EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
EN 15335:2007 Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2000 °C
EN ISO 9856:1995 Conveyor Belts - Determination of Elastic Modulus (ISO 9856 : 1989)
EN 1723:1999 Light Conveyor Belts - Method of Test for the Determination of the Relaxed Elastic Modulus
EN ISO 6721-3:2021 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:2021)
EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
EN ISO 9856:2016 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5
EN ISO 10846-2:1998 Acoustics and Vibration - Laboratory Measurement of Vibro-Acoustic Transfer Properties of Resilient Elements - Part 2: Dynamic Stiffness of Elastic Supports for Translatory Motion - Direct Method ISO 10846-2:1997
EN ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008)
EN ISO 10565:1997 Oilseeds - Simultaneous Determination of Oil and Moisture Contents - Method Using Pulsed Nuclear Magnetic Resonance Spectrometry ISO 10565: 1993
EN ISO 9856:2003/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003/Amd 1:2012)
EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
EN ISO 9856:2003 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus ISO 9856:2003
EN ISO 13753:1998 Mechanical Vibration and Shock - Hand-Arm Vibration - Method for Measuring the Vibration Transmissibility of Resilient Materials When Loaded by the Hand-Arm System ISO 13753:1998
EN ISO 13753:2008 Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998)
prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength
EN ISO 11543:2002 Modified Starch - Determination of Hydroxypropyl Content - Method Using Proton Nuclear Magnetic Resonance (NMR) Spectrometry ISO 11543: 2000
EN ISO 10565:1998 Oilseeds - Simultaneous Determination of Oil and Water Contents - Method Using Pulsed Nuclear Magnetic Resonance Spectrometry ISO 10565:1998

American Society for Testing and Materials (ASTM), Determination of Elastic Modulus Resonance Method

ASTM C885-87(2002) Standard Test Method for Young''s Modulus of Refractory Shapes by Sonic Resonance
ASTM C885-87(2007) Standard Test Method for Young''s Modulus of Refractory Shapes by Sonic Resonance
ASTM C885-87(2007)e1 Standard Test Method for Young''s Modulus of Refractory Shapes by Sonic Resonance
ASTM C747-23 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM C747-93(1998) Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM C747-16 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM C747-93(2010)e1 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM C747-93(2005) Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM E1875-20a Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
ASTM C848-88(1999) Standard Test Method for Young''s Modulus, Shear Modulus, and Poisson''s Ratio For Ceramic Whitewares by Resonance
ASTM C848-88(2006) Standard Test Method for Young''s Modulus, Shear Modulus, and Poisson''s Ratio For Ceramic Whitewares by Resonance
ASTM C848-88(2020) Standard Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance
ASTM C848-88(2011) Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio For Ceramic Whitewares by Resonance
ASTM C1591-04 Standard Test Method for Determination of the Modulus of Elasticity of AAC
ASTM E2985/E2985M-14(2019) Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy
ASTM E2985/E2985M-14 Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy
ASTM C885-87(1997)e1 Standard Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance
ASTM C885-87(2012) Standard Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance
ASTM D4015-21 Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices
ASTM D4015-15 Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices
ASTM C885-87(2020) Standard Test Method for Young’s Modulus of Refractory Shapes by Sonic Resonance
ASTM E1875-13 Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio by Sonic Resonance
ASTM D4015-07 Standard Test Methods for Modulus and Damping of Soils by Resonant-Column Method
ASTM E1875-20 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
ASTM C1198-20 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Sonic Resonance
ASTM D4015-92(2000) Standard Test Methods for Modulus and Damping of Soils by the Resonant-Column Method
ASTM D4015-15e1 Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices
ASTM C623-92(2000) Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance
ASTM C623-92(1995)e1 Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance
ASTM C623-92(2015) Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance
ASTM C1198-96 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
ASTM C1198-08e1 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
ASTM E1875-00e1 Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio by Sonic Resonance
ASTM E1875-00 Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio by Sonic Resonance
ASTM E1875-08 Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio by Sonic Resonance
ASTM D6793-02 Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
ASTM D6793-02(2012) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
ASTM D6793-02(2007) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
ASTM C1259-15 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
ASTM B223-08(2018) Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
ASTM B223-08 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
ASTM C1198-01 Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio for Advanced Ceramics by Sonic Resonance
ASTM C1198-09 Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio for Advanced Ceramics by Sonic Resonance
ASTM C1198-09(2013) Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio for Advanced Ceramics by Sonic Resonance
ASTM E1876-22 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM E1876-15 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM E1876-21 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM D7369-09 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
ASTM D7369-20 Standard Test Method for Determining the Resilient Modulus of Asphalt Mixtures by Indirect Tension Test
ASTM D7271-06 Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM C1523-04 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants

German Institute for Standardization, Determination of Elastic Modulus Resonance Method

DIN EN 14146:2004-06 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency); German version EN 14146:2004
DIN EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency); German version EN 14146:2004
DIN 53513:1990-03 Determination of the viscoelastic properties of elastomers on exposure to forced vibration at non-resonant frequencies
DIN 53513:1990 Determination of the viscoelastic properties of elastomers on exposure to forced vibration at non-resonant frequencies
DIN 51915:2015-09 Testing of carbonaceous materials - Determination of dynamic moduls of elasticity by the resonance method - Solid materials
DIN 51915:1997 Testing of carbon materials - Determination of dynamic moduls of elasticity by the resonance method - Solid materials
DIN EN 15335:2007 Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2000 °C; English version of DIN EN 15335:2007-08
DIN EN ISO 10846-3:2003 Acoustics and vibration - Laboratory measurement of the vibro-acoustic properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-3:2002); German version EN
DIN EN 14580:2005 Natural stone test methods - Determination of static elastic modulus; German version EN 14580:2005
DIN EN 14580:2005-07 Natural stone test methods - Determination of static elastic modulus; German version EN 14580:2005
DIN EN ISO 21181:2007 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2005); German version EN ISO 21181:2006
DIN EN ISO 21181:2013-09 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2013); German version EN ISO 21181:2013
DIN EN ISO 11543:2002-06 Modified starch - Determination of hydroxypropyl content - Method using proton nuclear magnetic resonance (NMR) spectrometry (ISO 11543:2000); German version EN ISO 11543:2002
DIN EN ISO 9856:2017-03 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016); German version EN ISO 9856:2016
DIN EN ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008); English versio
DIN EN ISO 10565:1998 Oilseeds - Simultaneous determination of oil and water contents - Method using pulsed nuclear magnetic resonance spectrometry (ISO 10565:1998); German version EN ISO 10565:1998
DIN EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5
DIN EN 17408:2020-11 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry; German version EN 17408:2020
DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN 52377:2016-07 Testing of plywood - Determination of modulus of elasticity in tension and of tensile strength
DIN EN ISO 13753:2008-09 Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998); German version EN ISO 13753:2008 / Note: DIN EN ISO 13753 (1998-10) re...
DIN EN ISO 10846-3:2003-06 Acoustics and vibration - Laboratory measurement of the vibro-acoustic properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-3:2002); German version...
DIN EN ISO 10846-5:2009-07 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 1084...
DIN EN ISO 13753:2008 Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998); English version of DIN EN ISO 13753:2008-09
DIN EN ISO 6721-3:2021-05 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:2021); German version EN ISO 6721-3:2021
DIN 54458:2013 Structural adhesives - Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillation rheometry
DIN EN ISO 10846-2:2008-11 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008); German vers...
DIN EN 17408:2020 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry; German version EN 17408:2020
DIN EN ISO 13753 Berichtigung 1:2009-01 Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998); German version EN ISO 13753:2008, Corrigendum to DIN EN ISO 13753:2008-09
DIN EN 12390-13:2019 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression; German and English version prEN 12390-13:2019
DIN EN 12390-13:2021-09 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression; German version EN 12390-13:2021
DIN EN ISO 9856:2017 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016); German version EN ISO 9856:2016

Danish Standards Foundation, Determination of Elastic Modulus Resonance Method

DS/EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
DS/EN 15335:2007 Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2 000 °C
DS/EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
DS/EN ISO 11543:2002 Modified starch - Determination of hydroxypropyl content - Method using proton nuclear magnetic resonance (NMR) spectrometry
DS/EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
DS/ISO 6721-4:2011 Plastics - Determination of dynamic mechanical properties - Part 4: Tensile vibration - Non-resonance method
DS/ISO 6721-5/Amd. 1:2011 Plastics - Determination of dynamic mechanical properties - Part 5: Flexural vibration - Non-resonance method
DS/ISO 6721-5:2011 Plastics - Determination of dynamic mechanical properties - Part 5: Flexural vibration - Non-resonance method
DS/ISO 6721-6/Amd. 1:2011 Plastics - Determination of dynamic mechanical properties - Part 6: Shear vibration - Non-resonance method
DS/ISO 6721-6:2011 Plastics - Determination of dynamic mechanical properties - Part 6: Shear vibration - Non-resonance method
DS/ISO 6721-7/Amd. 1:2011 Plastics - Determination of dynamic mechanical properties - Part 7: Torsional vibration - Non-resonance method
DS/ISO 6721-7:2011 Plastics - Determination of dynamic mechanical properties - Part 7: Torsional vibration - Non-resonance method
DS/EN ISO 9856:2004 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
DS/EN ISO 9856/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
DS/EN ISO 6721-3:1996 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method
DS/ISO 6721-3:2021 Plastics – Determination of dynamic mechanical properties – Part 3: Flexural vibration – Resonance-curve method
DS/EN ISO 10846-3:2002 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
DS/EN ISO 10565:1999 Oilseeds - Simultaneous determination of oil and water contents - Method using pulsed nuclear magnetic resonance spectrometry
DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
DS/ISO 23486:2021 Metallic and other inorganic coatings – Measurement of Young's modulus of thermal barrier coatings at elevated temperature by flexural resonance method
DS/EN ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
DS/EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
DS/EN ISO 13753:2008 Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
DS/EN ISO 5511/AC:1997 Oilseeds - Determination of oil content - Method using continuous-wave low-resolution nuclear magnetic resonance spectrometry (Rapid method)
DS/EN ISO 5511:1997 Oilseeds - Determination of oil content - Method using continuous-wave low-resolution nuclear magnetic resonance spectrometry (Rapid method)
DS/EN 12390-13:2021 Testing hardened concrete – Part 13: Determination of secant modulus of elasticity in compression

Lithuanian Standards Office , Determination of Elastic Modulus Resonance Method

LST EN 14146-2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
LST EN 15335-2007 Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2 000 °C
LST EN 14580-2005 Natural stone test methods - Determination of static elastic modulus
LST EN ISO 21181:2007 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2005)
LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
LST EN ISO 10846-3:2003 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-3:2002)
LST EN ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008)
LST EN ISO 11543:2003 Modified starch - Determination of hydroxypropyl content - Method using proton Nuclear Magnetic Resonance (NMR) spectrometry (ISO 11543:2000)
LST EN ISO 9856:2004 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003)
LST EN ISO 6721-3:2021 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:2021)
LST EN ISO 9856:2004/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003/Amd.1:2012)
LST EN 12390-13-2021 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
LST EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5
LST EN ISO 13753:2008 Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998)

AENOR, Determination of Elastic Modulus Resonance Method

UNE-EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
UNE 53630:2010 Rubber. Determination of elasticity modulus shears. Quadruple-shear method.
UNE 36745:2004 Test method for the determination of the modulus of elasticity of steel for reinforced concrete.
UNE-EN ISO 11543:2002 Modified starch - Determination of hydroxypropyl content - Method using proton nuclear magnetic resonance (NMR) spectrometry. (ISO 11543:2000)
UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
UNE-EN ISO 10846-2:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008)
UNE-EN ISO 10846-3:2003 Acoustics and vibration. Laboratory measurements of vibro-acoustic transfer properties of resilient elements. Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion. (ISO 10846-3:2002)
UNE-EN 12390-13:2014 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
UNE-EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5
UNE-EN ISO 13753:2008 Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998)

Association Francaise de Normalisation, Determination of Elastic Modulus Resonance Method

NF B10-631*NF EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
NF EN 14146:2004 Méthodes d'essai pour pierres naturelles - Détermination du module d'élasticité dynamique (par la mesure de la fréquence de résonance fondamentale)
NF ISO 12076:2008 Câbles en acier - Détermination du module effectif d'élasticité
NF A47-207*NF ISO 12076:2008 Steel wire ropes - Determination of the actual modulus of elasticity
NF EN ISO 11543:2002 Amidon modifié - Détermination de la teneur en hydroxyrpopyle - Méthode spéctrométrique de résonance magnétique nucléaire du proton
NF B10-638*NF EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
NF EN 14580:2005 Méthodes d'essai des pierres naturelles - Détermination du module d'élasticité statique
NF B43-358*NF EN 15335:2007 Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2000oC
NF EN 15335:2007 Céramiques techniques avancées - Céramiques composites - Détermination des propriétés élastiques par une méthode de résonance sur poutres, jusqu'à 2000oC
NF T47-111:2004 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus.
NF S31-030-3*NF EN ISO 10846-3:2002 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3 : indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
NF T47-154*NF EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
NF EN ISO 21181:2013 Courroies transporteuses légères - Détermination du module d'élasticité relaxé
NF EN ISO 6721-3:2021 Plastiques - Détermination des propriétés mécaniques dynamiques - Partie 3 : vibration en flexion - Méthode en résonance
NF T47-111*NF EN ISO 9856:2017 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
NF T51-117-3:1996 Plastics. Determination of dynamic mechanical properties. Part 3 : flexural vibration. Resonance-curve method.
NF S31-030-2*NF EN ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2 : direct method for determination of the dynamic stiffness of resilient supports for translatory motion
NF S31-030-5*NF EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5 : driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
NF T51-117-3:2021 Plastics - Determination of dynamic mechanical properties - Part 3 : flexural vibration - Resonance-curve method
NF V03-631*NF EN ISO 11543:2002 Modified starch - Determination of hydroxypropyl content - Method using proton nuclear magnetic resonance (MNR) spectrometry.
NF V03-907:1997 Oilseeds. Determination of oil content. Method using continuous-wave low-resolution nuclear magnetic resonance spectrometry (rapid method).
NF EN ISO 10846-3:2002 Acoustique et vibrations - Mesurage en laboratoire des propriétés de transfert vibro-acoustique des éléments élastiques - Partie 3 : méthode indirecte pour la détermination de la raideur dynamique en translation des supports élastiques
NF EN ISO 10846-2:2008 Acoustique et vibrations - Mesurage en laboratoire des propriétés de transfert vibro-acoustique des éléments élastiques - Partie 2 : méthode directe pour la détermination de la raideur dynamique en translation des supports élastiques
NF A95-336*NF EN 23312:1993 Sintered metal materials and hardmetals. Determination of young modulus.
NF V03-916*NF EN ISO 10565:1998 Oilseeds. Simultaneous determination of oil and water contents. Method using pulsed nuclear magnetic resonance spectrometry.
NF EN ISO 10565:1998 Graines oléagineuses - Détermination simultanée de la teneur en huile et en eau - Méthode par spectrométrie par résonance magnétique nucléaire pulsée.
NF EN 310:1993 Panneaux à base de bois - Détermination du module d'élasticité en flexion et de la résistance à la flexion
NF EN ISO 9856:2017 Courroies transporteuses - Détermination de l'allongement élastique et rémanent et calcul du module d'élasticité
NF EN ISO 13753:2008 Vibrations et chocs mécaniques - Vibrations mains-bras - Méthode pour mesurer le facteur de transmission des vibrations par les matériaux résilients chargés par le système main-bras
NF E90-700*NF EN ISO 13753:2008 Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
NF EN ISO 10846-5:2009 Acoustique et vibrations - Mesurage en laboratoire des propriétés de transfert vibro-acoustique des éléments élastiques - Partie 5 : méthode du point d'application pour la détermination de la raideur dynamique de transfert basse fréquence en t...
NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
FD T66-065:2018 Bitumen and bituminous binders - Determination of the complex modulus - Elasticimeter
NF T47-111/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus - Amendment 1.
NF T60-250:1995 Animal and vegetable fats and oils. Determination of solid fat content. Pulsed nuclear magnetic resonance method.
NF V03-916:1997 OILSEEDS. SIMULTANEOUS DETERMINATION OF OIL AND MOISTURE CONTENTS. METHOD USING PULSED NUCLEAR MAGNETIC RESONANCE SPECTROMETRY. (EUROPEAN STANDARD EN ISO 10565).

Korean Agency for Technology and Standards (KATS), Determination of Elastic Modulus Resonance Method

KS F 2437-2013 Standard test method for dynamic modulus of elasticity, rigidity and dynamic Poisson’s ratio of concrete specimens by resonance vibration
KS F 2437-2008 Testing method for dynamic modulus of elasticity, rigidity and dynamic Poisson’s ratio of concrete specimens by resonance vibration
KS F 2437-1982 Testing method for dynamic modulus of elasticity, rigidity and dynamic Poisson’s ratio of concrete specimens by resonance vibration
KS F 2437-2019 Standard test method for dynamic modulus of elasticity, dynamic modulus of rigidity and dynamic Poisson’s ratio of concrete specimens by forced resonance apparatus
KS M ISO 5629:2007 Paper and board-Determination of bending stiffness-Resonance method
KS M ISO 5629:2017 Paper and board－Determination of bending stiffness－Resonance method
KS D ISO 12076-2006(2011) Steel wire ropes－Determination of the actual modulus of elasticity
KS D ISO 12076:2006 Steel wire ropes-Determination of the actual modulus of elasticity
KS D ISO 12076:2013 Steel wire ropes－Determination of the actual modulus of elasticity
KS M 3023-2002 Testing method for dynamic mechanical properties of plasticsby non－resonant, forced, fixed frequency oscillation
KS M 3023-1982 Testing method for dynamic mechanical properties of plasticsby non－resonant, forced, fixed frequency oscillation
KS M ISO 6721-3:2003 Plastics-Determination of dynamic mechanical properties-Part 3:Flexural vibration-Resonance-curve method
KS M ISO 6721-4:2013 Plastics ㅡ Determination of dynamic mechanical properties ㅡ Part 4: Tensile vibration ㅡ Non-resonance method
KS M ISO 6721-5:2003 Plastics-Determination of dynamic mechanical properties-Part 5:Flexural vibration-Non-resonance method
KS M ISO 6721-6:2003 Plastics-Determination of dynamic mechanical properties-Part 6:Shear vibration-Non-resonance method
KS M ISO 6721-7:2003 Plastics-Determination of dynamic mechanical properties-Part 7:Torsional vibration-Non-resonance method
KS M ISO 6721-4:2003 Plastics-Determination of dynamic mechanical properties-Part 4:Tensile vibration-Non-resonance method
KS M ISO 6721-12:2014 Plastics — Determination of dynamic mechanical properties — Part 12: Compressive vibration — Non-resonance method
KS M ISO 6721-6-2016(2021) Plastics－Determination of dynamic mechanical properties－Part 6：Shear vibration－Non－resonance method
KS M ISO 6721-7-2016(2021) Plastics－Determination of dynamic mechanical properties－Part 7：Torsional vibration－Non-resonance method
KS M ISO 6721-5:2022 Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method
KS M ISO 6721-4-2013(2018) Plastics ㅡ Determination of dynamic mechanical properties ㅡ Part 4: Tensile vibration ㅡ Non-resonance method
KS M ISO 6721-5-2016(2021) Plastics－Determination of dynamic mechanical properties－Part 5：Flexural vibration－Non－resonance method
KS M ISO 6721-5:2016 Plastics－Determination of dynamic mechanical properties－Part 5：Flexural vibration－Non－resonance method
KS M ISO 6721-6:2016 Plastics－Determination of dynamic mechanical properties－Part 6：Shear vibration－Non－resonance method
KS M ISO 6721-7:2016 Plastics－Determination of dynamic mechanical properties－Part 7：Torsional vibration－Non-resonance method
KS M ISO 6721-7:2022 Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method
KS M ISO 6721-6:2022 Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method
KS I ISO 10846-2:2007 Acoustics and vibration－Laboratory measurement of vibro－acoustic transfer properties of resilient elements－Part 2：Dynamic stiffness of elastic supports for translatory motion－Direct method
KS I ISO 10846-3:2020 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements —Part 3: Indirect method for determination of the dynamic stiffness of resilient supports f
KS M ISO 6721-12-2014(2019) Plastics — Determination of dynamic mechanical properties — Part 12: Compressive vibration — Non-resonance method
KS M ISO 6721-3:2016 Plastics－Determination of dynamic mechanical properties－Part 3：Flexural vibration－Resonance-curve method
KS M ISO 6721-3-2016(2021) Plastics－Determination of dynamic mechanical properties－Part 3：Flexural vibration－Resonance-curve method
KS I ISO 10846-3:2007 Acoustics and vibration－Laboratory measurement of vibro－acoustic transfer properties of resilient elements－Part 3：Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
KS L ISO 17561:2003 Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for elastic moduli of monolithic ceramics at roomtemperature by sonic resonance
KS L ISO 17561:2018 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
KS I ISO 10846-2:2020 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements —Part 2: Direct method for determination of the dynamic stiffness of resilient supports for
KS I ISO 10846-5:2019 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5: Driving point method for determination of the low-frequency transfer stiffness of
KS F 2376-2014 Standard test method for determining the resilient modulus of asphalt mixtures using indirect tensile mode
KS B ISO 13753_2001-2016(2021) Mechanical vibration and shock－Hand-arm vibration-Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
KS B ISO 13753:2001 Mechanical vibration and shock-Hand-arm vibration-Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
KS B 0707-2001 Mechanical vibration and shock-Hand-arm vibration-Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
KS B ISO 13753_2001:2001 Mechanical vibration and shock-Hand-arm vibration-Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
KS B ISO 13753_2001:2016 Mechanical vibration and shock－Hand-arm vibration-Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
KS K ISO 1973:2018 Textile fibres — Determination of linear density — Gravimetric method and vibroscope method

CZ-CSN, Determination of Elastic Modulus Resonance Method

CSN 49 0124-1980 Resonant method for determination of modulus of elasticity and of tho loga- rithmic decrement of vibration
CSN 34 6311-1984 Testing of ceramic elektrolochtiic mulo rials. Methods of determination of tin; elasticity modulus
CSN 73 1319-1968 Determination of modulus o? elasticity and deformability of concrete
CSN 49 0116-1980 Wood. Determination of the modulus of elasticity in static bending
CSN ISO 6784:1993 Concrete-Determination of static modulus of elasticity in compression
CSN 79 3819-1977 ting of leatliers. Apparent modulus iíiision elasticity, tensilc stiffncss I agreement modulus of leathers
CSN 72 5021-1973 Testing of fired ceramic materials. Determination of the modullus of elasticity in tension

International Organization for Standardization (ISO), Determination of Elastic Modulus Resonance Method

ISO 18142:2014 Carbonaceous materials for the production of primary aluminium - Baked carbon bodies - Determination of the dynamic elasticity modulus by the resonance method
ISO 9856:1989 Conveyor belts; determination of elastic modulus
ISO 5629:1983 Paper and board; Determination of bending stiffness; Resonance method
ISO 5629:2017 Paper and board - Determination of bending stiffness - Resonance method
ISO 3349:1975 Wood; Determination of modulus of elasticity in static bending
ISO 12076:2002 Steel wire ropes - Determination of the actual modulus of elasticity
ISO 9856:2003 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
ISO 9856:2016 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
ISO/TR 4137:1978 Plastics; Determination of modulus of elasticity by alternating flexure
ISO 17561:2002/Cor 1:2007 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance; Technical Corrigendum 1
ISO 6721-3:1994 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method
ISO 6721-3:2021 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method
ISO 21181:2005 Light conveyor belts - Determination of the relaxed elastic modulus
ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
ISO 6721-4:2008 Plastics - Determination of dynamic mechanical properties - Part 4: Tensile vibration - Non-resonance method
ISO 6721-12:2009 Plastics - Determination of dynamic mechanical properties - Part 12: Compressive vibration - Non-resonance method
ISO 6721-4:1994 Plastics - Determination of dynamic mechanical properties - Part 4: Tensile vibration - Non-resonance method
ISO 6721-6:1996 Plastics - Determination of dynamic mechanical properties - Part 6: Shear vibration - Non-resonance method
ISO 6721-7:1996 Plastics - Determination of dynamic mechanical properties - Part 7: Torsional vibration - Non-resonance method
ISO 6721-5:1996 Plastics - Determination of dynamic mechanical properties - Part 5: Flexural vibration - Non-resonance method
ISO 6721-12:2022 Plastics — Determination of dynamic mechanical properties — Part 12: Compressive vibration — Non-resonance method
ISO 6721-7:2019 Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method
ISO 6721-5:2019 Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method
ISO 11093-7:2011 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method
ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
ISO 8292:1991 Animal and vegetable fats and oils; determination of solid fat content; pulsed nuclear magnetic resonance method
ISO 6721-6:2019 Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method
ISO 6721-4:2019 Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method
ISO 5511:1984 Oilseeds — Determination of oil content — Low resolution nuclear magnetic resonance spectrometric method
ISO 10846-3:2002 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
ISO 17561:2002 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
ISO 17561:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
ISO 6721:1983 Plastics; Determination of damping properties and complex modulus by bending vibration
ISO 10846-5:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
ISO 10565:1993 Oilseeds; simultaneous determination of oil and moisture contents; method using pulsed nuclear magnetic resonance spectrometry
ISO 11543:2000 Modified starch - Determination of hydroxypropyl content - Method using proton nuclear magnetic resonance (NMR) spectrometry
ISO 6721-3:1994/cor 1:1995 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method; Technical Corrigendum 1
ISO 6721-7:1996/Amd 1:2007 Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method — Amendment 1
ISO 6721-5:1996/Amd 1:2007 Plastics - Determination of dynamic mechanical properties - Part 5: Flexural vibration - Non-resonance method; Amendment 1
ISO 6721-6:1996/Amd 1:2007 Plastics - Determination of dynamic mechanical properties - Part 6: Shear vibration - Non-resonance method; Amendment 1
ISO 23486:2021 Metallic and other inorganic coatings - Measurement of Young's modulus of thermal barrier coatings at elevated temperature by flexural resonance method
ISO 10565:1998 Oilseeds - Simultaneous determination of oil and water contents - Method using pulsed nuclear magnetic resonance spectrometry
ISO 16978:2003 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
ISO 3312:1987 Sintered metal materials and hardmetals; Determination of Young modulus
ISO 13753:1998 Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
ISO/CD 10565:2023 Oilseeds — Simultaneous determination of oil and water contents — Method using pulsed nuclear magnetic resonance spectrometry
ISO 10632:2000 Oilseed residues - Simultaneous determination of oil and water contents - Method using pulsed nuclear magnetic resonance spectroscopy

国家市场监督管理总局、中国国家标准化管理委员会, Determination of Elastic Modulus Resonance Method

GB/T 9966.9-2021 Test methods for natural stone—Part 9: Determination of the dynamic modulus of elasticity by measuring the fundamental resonance frequency
GB/T 38897-2020 Non-destructive testing—Measurement method for material elastic modulus and Poisson's ratio using ultrasoinc velocity
GB/T 40406-2021 Standard test method for static modulus of elasticity and poisson's ratio of carbon materials in compression
GB/T 39682-2020 Fine ceramics—Determination of elastic modulus at high temperature or ultra-high temperature—Split ring relative method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Determination of Elastic Modulus Resonance Method

GB/T 14453-1993 Metallic materials. Standard test method for the elastic modulus at high temperature. The method of disc. Vibrator
GB/T 1936.2-1991 Method for determination of the modulus of elasticity in static bending of wood
GB/T 3074.2-2008 Method for the determination of the elastic modulus of graphite electrodes
GB/T 1936.2-2009 Method for determination of the modulus of elasticity in static bending of wood
GB/T 3074.2-1982 Method for determination of the elastic modulus of graphite electrodes
GB/T 29895-2013 Standard test methods for nondestructive evaluation of wood-based flexural members using transverse vibration
GB/T 22906.7-2008 Testing of cores.Part 7:Determination of flexural modulus by the three-point method
GB/T 14694-1993 Plastics. Determination of compressive elastic modulus
GB/T 24191-2009 Steel wire ropes.Determination of the actual modulus of elasticity
GB/T 1943-2009 Method for determination of the modulus of elasticity in compression perpendicular to grain of wood
GB/T 15777-1995 Method for determination of the modulus of elasticity in compressive parallel to grain of wood
GB/T 1943-1991 Method for determination of the modulus of elasticity in compression perpendicular to grain of wood
GB/T 43112-2023 Rate jump method for measuring elastic modulus of metallic materials
GB/T 20376-2006 Modified starch.Determination of hydroxypropyl content - Method using proton nuclear magnetic resonance (NMR) spectrometry
GB/T 22906.8-2008 Testing of cores.Part 8:Determination of natural frequency and flexural modulus by experimental modal analysis
GB/T 33061.6-2023 Determination of dynamic mechanical properties of plastics - Part 6: Non-resonant shear vibration method
GB/T 33061.5-2023 Determination of dynamic mechanical properties of plastics - Part 5: Non-resonant bending vibration method
GB/T 33061.7-2023 Determination of dynamic mechanical properties of plastics - Part 7: Non-resonant torsional vibration method
GB/T 33061.4-2023 Determination of dynamic mechanical properties of plastics - Part 4: Non-resonant tensile vibration method
GB/T 43013-2023 Determination of dynamic elastic modulus of chemical fibers by acoustic pulse propagation method
GB/T 22159.3-2008 Acoustics and vibration.Laboratory measurement of vibro-acoustic transfer properties of resilient element.Part 3:Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
GB/T 22159.2-2012 Acoustics and vibration.Laboratory measurement of vibro-acoustic transfer properties of resilient elements.Part 2:Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
GB/T 15902-2009 Conveyor belts-Determination of elastic and permanent elongation and calculation of elastic modulus
GB/T 5166-2023 Determination of elastic modulus of sintered metal materials and cemented carbide
GB/T 11718.8-1989 Medium density fiberboard--Determination of static bending strength and elastic modulus
GB/T 19739-2005 Mechanical vibration and shock.Hand-arm vibration.Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system

Professional Standard - Ferrous Metallurgy, Determination of Elastic Modulus Resonance Method

YB/T 5350-2006 Method for Measuring High Temperature Elastic Modulus of Metallic Materials by Disc Oscillator Method

American National Standards Institute （ANSI), Determination of Elastic Modulus Resonance Method

ANSI/ASTM C747:2005 Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ANSI S2.22-1998 Resonance Method for Measuring the Dynamic Mechanical Properties of Viscoelastic Materials
ANSI S2.4-1976 Method for Specifying the Characteristics of Auxiliary Analog Equipment for Shock and Vibration Measurements
ANSI/TIA/EIA 455-113-1996 Polarization-Mode Dispersion Measurement for Single-Mode Optical Fibers by the Fixed Analyzer Method
ANSI/ASA S2.22-1998 American National Standard Resonance Method for Measuring the Dynamic Mechanical Properties of Viscoelastic Materials

Professional Standard - Chemical Industry, Determination of Elastic Modulus Resonance Method

HG/T 3321-2012 Vulcanized rubber.Determination of elastic modulus
HG/T 3321-1981 Method for determination of modulus of elasticity of vulcanized rubber

GOSTR, Determination of Elastic Modulus Resonance Method

GOST R 57862-2017 Composites. Determination of dynamic young's modulus, shear modulus and poisson's ratio by sonic resonance
GOST R 57916-2017 Plastics. Determination of dynamic mechanical properties. Part 5. Flexural vibration. Non-resonance method

YU-JUS, Determination of Elastic Modulus Resonance Method

JUS U.J6.236-1983 Testing of plastics and damped laminated systems.Bending vibration test;determination of complex modulus of elasticity
JUS D.C8.108-1983 Testing ofparticle boards. Determination modu/us ofelasticity in bending
JUS U.M1.025-1982 Concrete. Determination of static modulus of elasticity in compression
JUS B.F8.159-1987 Noncombustible mineral boards. Determination of.modulus ofelasticity in bending
JUS D.A1.035-1979 Testingofwood. Determination ofmodulus ofelasticitv in static ben?ing
JUS U.J6.226-1982 Teso'ng of cellular plastics; determination of the dynamic modulus ofelasticity and the loss factor

Indonesia Standards, Determination of Elastic Modulus Resonance Method

SNI 07-6733-2002 Test methods for elasticity of modulus, tangen of modulus, and chord of modulus
SNI 2826-2008
SNI ISO 16978:2010 Wood-based panels - Determination of modulus elasticity in bending and of bending strength
SNI 03-6836-2002 Test method of resilient modulus for asphalt mixture by indirect tensile

TR-TSE, Determination of Elastic Modulus Resonance Method

TS 2478-1976 WOOD - DETERMINATION OF MODULUS OF ELASTICITY IN STATIC BENDING

RO-ASRO, Determination of Elastic Modulus Resonance Method

STAS 9994-1975 WOOD Determination of modulus of elasticity by the dynamic method
STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
STAS 10574-1976 WOOD Detorminalion of the modulus of elasticity in shear by the dynamic method

(U.S.) Ford Automotive Standards, Determination of Elastic Modulus Resonance Method

FORD FLTM BS 105-01-2000 DETERMINATION OF FLEXURAL STRENGTH AND THE ELASTICITY MODULUS
FORD FLTM BS 105-1-2000 DETERMINATION OF FLEXURAL STRENGTH AND THE ELASTICITY MODULUS
FORD FLTM EU-BS 005-1-2000 DETERMINATION OF FLEXURAL STRENGTH AND THE ELASTICITY MODULUS (Replaces FLTM EU-BS 050-01)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Determination of Elastic Modulus Resonance Method

GB/T 15777-2017 Method for determination of the modulus of elasticity in compression parallel to grain of wood
GB/T 34367-2017 Light conveyor belts—Determination of the relaxed elastic modulus
GB/T 22159.5-2017 Acoustics and vibration—Laboratory measurement of vibro-acoustic transfer properties of resilient elements—Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
GB/T 15902-2017 Conveyor belts—Determination of elastic and permanent elongation and calculation of elastic modulus
GB/T 34692-2017 Thermoplastic elastomer—Determination of halogen—Oxygen bomb combustion-ion chromatography

Shandong Provincial Standard of the People's Republic of China, Determination of Elastic Modulus Resonance Method

DB37/T 2263-2012 Determination of modulus of elasticity in tension of vulcanized rubber

Professional Standard - Water Conservancy, Determination of Elastic Modulus Resonance Method

SL 135-2017 Calibration method of concrete dynamic elastic modulus tester

水利部, Determination of Elastic Modulus Resonance Method

SL/T 135-2017 Calibration method of concrete dynamic elastic modulus measuring instrument

ES-AENOR, Determination of Elastic Modulus Resonance Method

未注明发布机构, Determination of Elastic Modulus Resonance Method

BS EN 1723:2000 Light conveyor belts - Method of test for the determination of the relaxed elastic modulus
DIN EN ISO 9856:2004 Conveyor belts – determination of elastic and permanent elongation and calculation of elastic modulus
BS EN ISO 10846-3:2002(2003) Acoustics and vibration — Laboratory measurement of vibro - acoustic transfer properties of resilient elements — Part 3 : Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
BS 1881-121:1983(1998) Testing concrete — Part 121 : Method for determination of static modulus of elasticity in compression
BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
BS 6319-6:1984(2011) Testing of resin compositions for use in construction — Part 6 : Method for determination of modulus of elasticity in compression
DIN EN ISO 6721-3:2021 Plastics – Determination of dynamic mechanical properties – Part 3: Bending vibration – Resonance curve method (ISO 6721-3:2021)
BS EN ISO 5511:1997(2000) Oilseeds — Determination ofoil content — Method using continuous - wave low - resolution nuclear magnetic resonance spectrometry (Rapid method)

CEN - European Committee for Standardization, Determination of Elastic Modulus Resonance Method

EN ISO 21181:2006 Light conveyor belts - Determination of the relaxed elastic modulus
EN ISO 10846-3:2002 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion

GM Daewoo, Determination of Elastic Modulus Resonance Method

GMKOREA EDS-T-7432-2012 Determination of Pressure Modulus and Loss Angle of Elastomers ???? ?? ???, ??? ?? ?? Version 4; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW14738. [Replaced: GMKOREA

ES-UNE, Determination of Elastic Modulus Resonance Method

UNE-EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2013) (Endorsed by AENOR in April of 2013.)
UNE-EN ISO 9856:2016 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016) (Endorsed by AENOR in December of 2016.)
UNE-EN ISO 6721-3:2021 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:2021)
UNE-EN 17408:2021 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry
UNE-EN 12390-13:2022 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression

KR-KS, Determination of Elastic Modulus Resonance Method

KS M ISO 6721-6-2022 Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method
KS M ISO 6721-7-2016 Plastics－Determination of dynamic mechanical properties－Part 7：Torsional vibration－Non-resonance method
KS M ISO 6721-5-2022 Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method
KS M ISO 6721-7-2022 Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method
KS M ISO 6721-5-2016 Plastics－Determination of dynamic mechanical properties－Part 5：Flexural vibration－Non－resonance method
KS M ISO 6721-6-2016 Plastics－Determination of dynamic mechanical properties－Part 6：Shear vibration－Non－resonance method
KS I ISO 10846-3-2020 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements —Part 3: Indirect method for determination of the dynamic stiffness of resilient supports f
KS M ISO 6721-3-2016 Plastics－Determination of dynamic mechanical properties－Part 3：Flexural vibration－Resonance-curve method
KS L ISO 17561-2018 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
KS I ISO 10846-2-2020 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements —Part 2: Direct method for determination of the dynamic stiffness of resilient supports for
KS I ISO 10846-5-2019 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5: Driving point method for determination of the low-frequency transfer stiffness of
KS B ISO 13753_2001-2016 Mechanical vibration and shock－Hand-arm vibration-Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
KS K ISO 1973-2018 Textile fibres — Determination of linear density — Gravimetric method and vibroscope method

Professional Standard - Non-ferrous Metal, Determination of Elastic Modulus Resonance Method

YS/T 63.13-2016 Test methods for carbon materials for aluminum - Part 13: Determination of elastic modulus

Standard Association of Australia （SAA）, Determination of Elastic Modulus Resonance Method

AS 1012.17:1997 Methods of testing concrete - Determination of the static chord modulus of elasticity and Poisson's ratio of concrete specimens
AS/NZS 2891.13.1:2013

IT-UNI, Determination of Elastic Modulus Resonance Method

UNI EN ISO 6721-3:2021 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method
UNI EN 12390-13-2021 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression

The American Road & Transportation Builders Association, Determination of Elastic Modulus Resonance Method

AASHTO T 307-1999(R2007) Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
AASHTO T 307-1999 Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
AASHTO T307-1999 Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials Twentieth Edition

AASHTO - American Association of State Highway and Transportation Officials, Determination of Elastic Modulus Resonance Method

T 307-1999 Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
TP46-1994 Standard Test Method for Determining the Resilient Modulus of Soils and Aggregate Materials
TP31-1996 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension
TP31-1994 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension (Edition 1B)

IX-SA, Determination of Elastic Modulus Resonance Method

AS 1012 Pt.17:1976

SG-SPRING SG, Determination of Elastic Modulus Resonance Method

SS 78 Pt.A21-1987 Testing Concrete Part A21 : Method For Determination Of Static Modulus Of Elasticity In Compression

SE-SIS, Determination of Elastic Modulus Resonance Method

SIS SS 13 73 09-1982 Autoclaved aerated concrete - Determination of modulus of elasticity at compression

Military Standard of the People's Republic of China-General Armament Department, Determination of Elastic Modulus Resonance Method

GJB 9981-2021 Determination of hydrogen content in aviation fuel using low-resolution pulse nuclear magnetic resonance method

IN-BIS, Determination of Elastic Modulus Resonance Method

IS 9221-1979

Group Standards of the People's Republic of China, Determination of Elastic Modulus Resonance Method

T/CIESC 0034-2022 Rapid determination for properties of crude oils by low resolution nuclear magnetic resonance hydrogen spectroscopy
T/CIESC 0036-2022 Rapid determination for properties of distillated oils by low resolution nuclear magnetic resonance hydrogen spectroscopy

NL-NEN, Determination of Elastic Modulus Resonance Method

NEN-EN 310-1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength

BE-NBN, Determination of Elastic Modulus Resonance Method

NBN-EN 310-1994

Professional Standard - Electron, Determination of Elastic Modulus Resonance Method

SJ 2317-1983 Test methods for elasticity modulus and loss factor of paper stock for loudspeakers

HU-MSZT, Determination of Elastic Modulus Resonance Method

MSZ 15747/12-1984

VN-TCVN, Determination of Elastic Modulus Resonance Method

TCVN 5726-1993 Heavy weight concrete.Method for determination of prismatic compressive strength and static modulus of elasticity
TCVN 7756-6-2007 Wood based panels.Test methods.Part 6: Determination of modulus of elasticity in bending and bending strength

CH-SNV, Determination of Elastic Modulus Resonance Method

SN EN ISO 6721-3:2021 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:2021)

PL-PKN, Determination of Elastic Modulus Resonance Method

PN-EN ISO 6721-3-2021-08 E Plastics--Determination of dynamic mechanical properties--Part 3: Flexural vibration--Resonance-curve method (ISO 6721-3:2021)

Professional Standard - Military and Civilian Products, Determination of Elastic Modulus Resonance Method

WJ 2538-1999 Determination of Structure and Content of Explosives and Their Related Substances by NMR Spectroscopy

(U.S.) Telecommunications Industries Association , Determination of Elastic Modulus Resonance Method

TIA/EIA-455-113-1997 FOTP-113 Polarization-Mode Dispersion Measurement for Single-Mode Optical Fibers by the Fixed Analyzer Method

Professional Standard - Energy, Determination of Elastic Modulus Resonance Method

NB/SH/T 6030-2021 Determination of Hydrogen Content in Petroleum Middle Distillates by Low Resolution Pulse NMR

AT-ON, Determination of Elastic Modulus Resonance Method

ONORM EN 310-1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
OENORM EN 12390-13-2021 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression

BELST, Determination of Elastic Modulus Resonance Method

STB 8070-2017 System for ensuring the uniformity of measurements of the Republic of Belarus. The bomb calorimeters. The method of the verification
STB 1501-2013 Highways. Мethod of determination elastic modulus and uniformity consolidation of materials of layers of road designs