ZH
RU
ES

Grain Size and Grain Size

Grain Size and Grain Size, Total:155 items.

In the international standard classification, Grain Size and Grain Size involves: Coals, Testing of metals, Non-ferrous metals, Ferrous metals, Iron and steel products, Particle size analysis. Sieving, Cutting tools, Products of non-ferrous metals, Powder metallurgy, Products of the chemical industry, Soil quality. Pedology, Earthworks. Excavations. Foundation construction. Underground works, Analytical chemistry, Surface treatment and coating, Ceramics, Metalliferous minerals, Non-destructive testing, Air quality.


HU-MSZT, Grain Size and Grain Size

Professional Standard - Ferrous Metallurgy, Grain Size and Grain Size

  • YB/T 4290-2012 Determination method of the largest grain size grade (ALA grain size) on the metallographic inspection surface

IN-BIS, Grain Size and Grain Size

Indonesia Standards, Grain Size and Grain Size

  • SNI 13-4702-1998 Determination of grain size of coal by sieving equipment
  • SNI 13-4715-1998 Determination of particle size distribution by Warman cyclosizer elustriation methods

International Organization for Standardization (ISO), Grain Size and Grain Size

  • ISO/DIS 643:2023 Steels — Micrographic determination of the apparent grain size
  • ISO 2624:1973 Copper and copper alloys — Estimation of average grain size
  • ISO 13383-1:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution
  • ISO 13067:2020 Microbeam analysis — Electron backscatter diffraction — Measurement of average grain size
  • ISO 2624:1990 Copper and copper alloys; estimation of average grain size
  • ISO 4499-2:2020 Hardmetals — Metallographic determination of microstructure — Part 2: Measurement of WC grain size
  • ISO 12633-2:2011 Hot-finished structural hollow sections of non-alloy and fine grain steels - Part 2: Dimensions and sectional properties

British Standards Institution (BSI), Grain Size and Grain Size

  • BS EN ISO 643:2020 Steels. Micrographic determination of the apparent grain size
  • BS EN 16090:2011 Copper and copper alloys. Estimation of average grain size by ultrasound
  • 17/30363662 DC BS EN ISO 643 Steels. Micrographic determination of the apparent grain size
  • BS EN 16090:2019 Copper and copper alloys. Estimation of average grain size by ultrasound
  • 19/30385570 DC BS EN 16090. Copper and copper alloys. Estimation of average grain size by ultrasound
  • BS ISO 13067:2020 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
  • BS EN ISO 4499-2:2020 Hardmetals. Metallographic determination of microstructure - Measurement of WC grain size
  • BS EN ISO 4499-2:2010 Hardmetals. Metallographic determination of microstructure. Measurement of WC grain size
  • 19/30365236 DC BS ISO 13067. Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
  • BS EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization. Determination of grain size and size distribution
  • BS EN 17289-3:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. Sedimentation method
  • BS EN 17289-2:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. Calculation method
  • 18/30369648 DC BS EN ISO 4499-2. Hardmetals. Metallographic determination of microstructure. Part 2. Measurement of WC grain size
  • 23/30436644 DC BS ISO 19430. Determination of particle size distribution and number concentration by particle tracking analysis (PTA)

German Institute for Standardization, Grain Size and Grain Size

  • DIN EN ISO 643:2020-06 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03); German version EN ISO 643:2020
  • DIN EN ISO 2624:1995-08 Copper and copper alloys - Estimation of average grain size (ISO 2624:1990); German version EN ISO 2624:1995
  • DIN EN ISO 643:2023-08 Steels - Micrographic determination of the apparent grain size (ISO/DIS 643:2023); German and English version prEN ISO 643:2023 / Note: Date of issue 2023-07-07*Intended as replacement for DIN EN ISO 643 (2020-06).
  • DIN EN 16090:2020-02 Copper and copper alloys - Estimation of average grain size by ultrasound; German version EN 16090:2019
  • DIN EN 15181/A1:2020-02 Copper and copper alloys - Estimation of average grain size by ultrasound; German version EN 16090:2019
  • DIN EN 16247-4:2020-02 Copper and copper alloys - Estimation of average grain size by ultrasound; German version EN 16090:2019
  • DIN EN ISO 643:2017 Steel - Micrographic determination of the apparent grain size (ISO/DIS 643:2017); German and English version prEN ISO 643:2017
  • DIN ISO 13067:2021-08 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2020)
  • DIN EN 16090:2012 Copper and copper alloys - Estimation of average grain size by ultrasound; German version EN 16090:2011
  • DIN ISO 13067:2021 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2020)
  • DIN EN ISO 4499-2:2020-11 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020); German version EN ISO 4499-2:2020
  • DIN EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution (ISO 13383-1:2012); German version EN ISO 13383-1:2016
  • DIN EN ISO 13383-1:2016-11 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution (ISO 13383-1:2012); German version EN ISO 13383-1:2016
  • DIN EN ISO 4499-2:2018 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO/DIS 4499-2:2018); German and English version prEN ISO 4499-2:2018
  • DIN EN 10210-2:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; English version of DIN EN 10210-2:2006-07
  • DIN EN 10210-2:1997 Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 2: Tolerances, dimensions and sectional properties; German version EN 10210-2:1997
  • DIN EN 10219-2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; English version of DIN EN 10219-2:2006-07

Danish Standards Foundation, Grain Size and Grain Size

  • DS/EN ISO 2624:1995 Copper and copper alloys - Estimation of average grain size
  • DS/EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size
  • DS/EN 16090:2012 Copper and copper alloys - Estimation of average grain size by ultrasound
  • DS/EN ISO 4499-2:2010 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size
  • DS/EN 10210-2+AC:2009 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • DS/EN 623-3:2001 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the Linear Intercept Method)
  • DS/EN 10219-2:2009 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • DS/EN 17289-3:2021 Characterization of bulk materials – Determination of a size-weighted fine fraction and crystalline silica content – Part 3: Sedimentation method
  • DS/EN 17289-2:2021 Characterization of bulk materials – Determination of a size-weighted fine fraction and crystalline silica content – Part 2: Calculation method

AENOR, Grain Size and Grain Size

  • UNE 37230:1986 LEAD AND LEAD ALLOYS- ESTIMATION OF THE AVERAGE GRAIN SIZE.
  • UNE-EN 16090:2012 Copper and copper alloys - Estimation of average grain size by ultrasound
  • UNE-EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
  • UNE-EN ISO 4499-2:2011 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2008)
  • UNE-EN 10210-2:2007 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • UNE-EN 10219-2:2007 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties

Korean Agency for Technology and Standards (KATS), Grain Size and Grain Size

  • KS D ISO 2624-2002(2022) Copper and copper alloys－Estimation of average grain size
  • KS D 0209-1982(1997) DETERMINATION OF FERRITE GRAIN SIZE TEST FOR STEEL
  • KS D 0209-1982 DETERMINATION OF FERRITE GRAIN SIZE TEST FOR STEEL
  • KS D ISO 14250:2003 Steel-Metallographic characterization of duplex grian size and distributions
  • KS D ISO 14250:2014 Steel－Metallographic characterization of duplex grian size and distributions
  • KS D 0305-2014 Methods for determining average grain size of magnesium alloy sheets
  • KS D 0205-2002(2017) Steel－Micrographic determination of the ferritic or austenitic grain size
  • KS D 0205-1987 Steel－Micrographic determination of the ferritic or austenitic grain size
  • KS D ISO 4499-2:2009 Hardmetals－Metallographic determination of microstructure－Part 2：Measurement of WC grain size
  • KS D 0202-1987(2022) Methods for estimating the average grain size of wrought copper and copper alloy
  • KS D 0202-1982 Methods for estimating the average grain size of wrought copper and copper alloy

ES-UNE, Grain Size and Grain Size

  • UNE 37230:1987 ERRATUM LEAD AND LEAD ALLOYS- ESTIMATION OF THE AVERAGE GRAIN SIZE.
  • UNE-EN 16090:2020 Copper and copper alloys - Estimation of average grain size by ultrasound
  • UNE-EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03)
  • UNE-EN ISO 4499-2:2021 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020)
  • UNE-EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution (ISO 13383-1:2012) (Endorsed by AENOR in June of 2016.)

RO-ASRO, Grain Size and Grain Size

  • STAS SR ISO 2624:1990 Copper and copper alloys. Estimation of average grain size
  • STAS 9162-1973 NON-METAL BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determination of grain size

RU-GOST R, Grain Size and Grain Size

  • GOST 21073.0-1975 Non-ferrous metals. Determination of grain size. General requirements
  • GOST R ISO 14250-2013 Steel. Metallographic characterization of duplex grain size and distribution
  • GOST R 53205-2008 Non-destructive testing. Evaluation of grains size of steel by ultrasound. General requirements
  • GOST 12536-2014 Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution
  • GOST 25734-1996 Alumina. Method for crystallooptic determination of monograins sizes in non-metallurgic alumina

Association Francaise de Normalisation, Grain Size and Grain Size

  • NF A04-102*NF EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size
  • NF E75-101:2001 Coated abrasives - Grain size analysis - Part 2 : determination of grain size distribution of macrogrits P12 to P220.
  • NF A51-130*NF EN 16090:2019 Copper and copper alloys - Estimation of average grain size by ultrasound
  • NF EN 16090:2019 Cuivre et alliages de cuivre - Estimation de la taille moyenne de grain par ultrasons
  • NF B41-204-1*NF EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1 : Determination of grain size and size distribution
  • NF EN ISO 13383-1:2016 Céramiques techniques - Caractérisation microstructurale - Partie 1 : Détermination de la taille et de la distribution des grains
  • NF ISO 6344-3:2022 Abrasifs appliqués - Détermination et désignation de la distribution granulométrique - Partie 3 : micrograins P240 à P5000
  • NF ISO 8486-2:2007 Abrasifs agglomérés - Détermination et désignation de la distribution granulométrique - Partie 2 : micrograins F230 à F2000
  • NF A95-186-2*NF EN ISO 4499-2:2020 Hardmetals - Metallographic determination of microstructure - Part 2 : measurement of WC grain size
  • NF EN ISO 4499-2:2020 Métaux-durs - Détermination métallographique de la microstructure - Partie 2 : mesurage de la taille des grains de WC
  • NF E75-230*NF ISO 8486-1:1996 Bonded abrasives. Determination and designation of grain size distribution. Part 1 : macrogrits F4 to F220.
  • NF A49-502-2:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2 : tolerances, dimensions and sectional properties.
  • NF A49-502-2:1997 Hot finished structural hollow sections of non-alloy and fine grain structural steels. Part 2 : tolerances, dimensions and sectional properties.
  • NF B40-309:1986 Refractories - Determination of the density,the open porosity and the total porosity of materials in grain form
  • NF A04-503:1988 Semi-products made from aluminium, copper, nickel and their alloys. Determination of grain size. Aluminium and aluminium alloys.
  • NF A04-505:1988 Semi-products made from aluminium, copper, nickel and their alloys. Determination of grain size. Nickel and nickel alloys.
  • NF A49-540-2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2 : tolerances, dimensions and sectional properties.
  • NF A49-540-2:1997 Cold form welded structural hollow sections of non-alloy and fine grain steels. Part 2 : tolerances, dimensions and sectional properties.
  • NF EN 17289-3:2020 Caractérisation des matériaux en vrac - Détermination de la fraction fine pondérée par taille et de la teneur en silice cristalline - Partie 3 : méthode par sédimentation

American Society for Testing and Materials (ASTM), Grain Size and Grain Size

  • ASTM E930-99(2015) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
  • ASTM E1181-87(1998)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
  • ASTM E1181-02 Standard Test Methods for Characterizing Duplex Grain Sizes
  • ASTM E1181-02(2023) Standard Test Methods for Characterizing Duplex Grain Sizes
  • ASTM B390-92(2006) Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
  • ASTM E2627-13(2019) Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
  • ASTM B390-92(1996)e1 Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
  • ASTM B390-92(2000) Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides

Lithuanian Standards Office , Grain Size and Grain Size

  • LST EN 16090-2012 Copper and copper alloys - Estimation of average grain size by ultrasound
  • LST EN ISO 2624:2000 Copper and copper alloys - Estimation of average grain size (ISO 2624:1990)
  • LST EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
  • LST EN ISO 4499-2:2010 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2008)
  • LST EN 10210-2-2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • LST EN 10210-2-2006/AC-2007 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • LST EN 623-3-2002 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the Linear Intercept Method)
  • LST EN 10219-2-2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties

CEN - European Committee for Standardization, Grain Size and Grain Size

  • PREN 16090-2019 Copper and copper alloys - Estimation of average grain size by ultrasound
  • DD ENV 623-3-1993 Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties - Part 3: Determination of Grain Size
  • EN 623-3:2001 Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties - Part 3: Determination of Grain Size and Size Distribution (Characterized by the Liner Intercept Method)
  • PREN 17289-2-2019 Characterization of bulk materials - Determination of a sizeweighted fine fraction and crystalline silica content - Part 2: Calculation method

CZ-CSN, Grain Size and Grain Size

  • CSN 42 0464-1962 Methods for estimating the average grain size of non — ferrous metals
  • CSN 42 0462-1983 Metal testing. Methods for estimating the average grain size of steel and non-ferrous metals
  • CSN 42 0463-1984 Steel. Method for estimating the grain size of austenite on fractures
  • CSN 65 4812-1969 Determination of size and mechanical strength of granules in fertilizers

European Committee for Standardization (CEN), Grain Size and Grain Size

  • EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03)
  • EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size
  • EN 16090:2011 Copper and copper alloys - Estimation of average grain size by ultrasound
  • EN ISO 2624:1995 Copper and Copper Alloys - Estimation of Average Grain Size
  • EN 10210-2:1997 Hot Finished Structural Hollow Sections of Non-Alloy and Fine Grain Structural Steels - Part 2: Tolerances, Dimensions and Sectional Properties
  • prEN 10210-2-1992 Hot finished structural hollow sections of non-alloy and fine grain structural steels; part 2: tolerances, dimensions and sectional properties
  • EN 10219-2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • EN 10219-2:1997 Cold Formed Welded Structural Hollow Sections of Non-Alloy and Fine Grain Steels - Part 2: Tolerances, Dimensions and Sectional Properties
  • prEN 10219-2-1992 Cold formed structural hollow sections of non-alloy and fine grain structural steels; part 2: tolerances, dimensions and sectional properties

GM North America, Grain Size and Grain Size

  • GM GM9613P-1994 Zinc Phosphate Crystal Size Determination Using "Faxfilm" Replication

SAE - SAE International, Grain Size and Grain Size

  • SAE AMS2316A-1991 METALLOGRAPHIC EVALUATION OF GRAIN SIZE IN WROUGHT NICKEL AND HEAT RESISTANT ALLOYS

Society of Automotive Engineers (SAE), Grain Size and Grain Size

  • SAE AMS2316-1989 METALLOGRAPHIC EVALUATION OF GRAIN SIZE IN WROUGHT NICKEL AND HEAT RESISTANT ALLOYS

IT-UNI, Grain Size and Grain Size

Japanese Industrial Standards Committee (JISC), Grain Size and Grain Size

  • JIS G 0551 AMD 1:2022 Steels -- Micrographic determination of the apparent grain size (Amendment 1)
  • JIS B 4141:1998 Diamond/CBN products -- Diamond or CBN grinding wheels and saws -- Dimensional characteristics and code for the forms

Group Standards of the People's Republic of China, Grain Size and Grain Size

  • T/CSTM 00799-2023 Determination of grain size in steel—High temperature laser scanning confocal microscope method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Grain Size and Grain Size

  • GB/T 31568-2015 Standard test method for determination of crystallite size of ZrO<下标2> coatings by Scherrer equation
  • GB/T 38532-2020 Microbeam analysis—Electron backscatter diffraction—Measurement of average grain size
  • GB/T 14999.7-2010 Test methods for grain sizes,primary dendrite spacing and microshrinkage of superalloy castings
  • GB/T 23413-2009 Determination of crystallite size and micro-strain of nano-materials.X-ray diffraction line broadening method
  • GB/T 3488.2-2018 Hardmetals.Metallographic determination of microstructure.Part 2:Measurement of WC grain size

未注明发布机构, Grain Size and Grain Size

  • DIN EN ISO 643 Berichtigung 1:2004 Steel — Microphotographic determination of apparent grain size (ISO 643:2003); German version EN ISO 643:2003
  • DIN EN 10219-2:1997 Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 2: Tolerances, dimensions and sectional properties

AT-ON, Grain Size and Grain Size

  • OENORM EN ISO 4499-2:2020 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020)

(U.S.) Ford Automotive Standards, Grain Size and Grain Size

  • FORD WSS-M2A177-A2-2014 ALUMINUM ALLOY, EXTRUSION, HEAT TREATABLE, SEAMLESS, HIGH STRENGTH, GRAIN SIZE CONTROLLED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A177-A1)

PL-PKN, Grain Size and Grain Size

  • PN-EN 17289-3-2021-05 E Characterization of bulk materials -- Determination of a size-weighted fine fraction and crystalline silica content -- Part 3: Sedimentation method
  • PN-EN 17289-2-2021-05 E Characterization of bulk materials -- Determination of a size-weighted fine fraction and crystalline silica content -- Part 2: Calculation method

  Grain Size and Grain Size, Grain Size and Grain Size.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved