ZH
RU
ES
Self-corrosion potential test method
Self-corrosion potential test method, Total:500 items.
In the international standard classification, Self-corrosion potential test method involves: Non-ferrous metals, Corrosion of metals, Iron and steel products, Extraction and processing of petroleum and natural gas, Insulating fluids, Testing of metals, Construction materials, Insulating materials, Materials for aerospace construction, Medical equipment, Petroleum products in general, Products of the chemical industry, Surface treatment and coating, Soil quality. Pedology, Mechanical testing, Rails and railway components, Air quality, Analytical chemistry, Semiconducting materials, Shipbuilding and marine structures in general, Components and accessories for telecommunications equipment, Environmental testing, Internal combustion engines for road vehicles, Electricity. Magnetism. Electrical and magnetic measurements, Welding, brazing and soldering, Equipment for the chemical industry, Lubricants, industrial oils and related products, Vocabularies, Miscellaneous domestic and commercial equipment, Electrical wires and cables, Rubber and plastics products, Adhesives, Test conditions and procedures in general, Protection against dangerous goods, Laboratory medicine, Protection of and in buildings, Fuels, Products of non-ferrous metals, Fibre optic communications, Geology. Meteorology. Hydrology, Fertilizers, Refractories, Road vehicle systems, Building accessories, Plastics, Aerospace electric equipment and systems, Electronic tubes, Protection against fire, Electrical engineering in general, Footwear, Equipment for petroleum and natural gas industries, Jewellery, Nuclear energy engineering, Crude petroleum, Magnetic materials, Inks. Printing inks, Ferrous metals, Resistors, Automatic controls for household use, Water quality.
American Society for Testing and Materials (ASTM), Self-corrosion potential test method
- ASTM G69-97(2003) Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
- ASTM G69-97 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
- ASTM G69-20 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
- ASTM G192-08(2014) Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
- ASTM G192-08 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
- ASTM G192-08(2020)e1 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
- ASTM C876-22b Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
- ASTM C876-15 Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
- ASTM B826-09 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
- ASTM D130-94(2000)e1 Standard Test Method for Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test
- ASTM F363-99(2011) Standard Test Method for Corrosion Testing of Gaskets
- ASTM D1275-06 Standard Test Method for Corrosive Sulfur in Electrical Insulating Oils
- ASTM A604/A604M-07(2017) Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
- ASTM A604-93(2003) Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
- ASTM B380-97(2002) Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
- ASTM A604-93(1998) Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
- ASTM B826-09(2020) Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
- ASTM B826-09(2015) Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
- ASTM G51-95(2005) Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
- ASTM G134-95(2006) Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
- ASTM F2129-17b Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
- ASTM F2129-19 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
- ASTM F2129-17a Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
- ASTM F2129-15 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
- ASTM F2129-19a Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
- ASTM F2129-17 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
- ASTM B826-03 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
- ASTM B826-97 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
- ASTM G134-95(2001)e1 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
- ASTM G134-95(2010)e1 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
- ASTM D5485-05 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
- ASTM B651-83(2001) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with the Double-Beam Interference Microscope
- ASTM B651-83(1995) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with the Double-Beam Interference Microscope
- ASTM B651-83(2006) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
- ASTM B651-83(2015) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
- ASTM D5485-99 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
- ASTM D5485-09 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
- ASTM D5485-21 Standard Test Method for Determining Corrosive Effect of Combustion Products Using the Cone Corrosimeter
- ASTM D5485-10 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
- ASTM D5485-11 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
- ASTM F2129-03 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
- ASTM B651-83(2010) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
- ASTM D5485-16 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
- ASTM B627-84(1992)e1 Test Method for Electrolytic Corrosion Testing (EC Test) (Withdrawn 1998)
- ASTM D1743-05ae1 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
- ASTM D1743-05 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
- ASTM D1743-05a Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
- ASTM D4048-97 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
- ASTM D4048-22 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
- ASTM F2129-01 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
- ASTM F2129-04 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
- ASTM F2129-06 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
- ASTM F2129-08 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
- ASTM D1275-03 Standard Test Method for Corrosive Sulfur in Electrical Insulating Oils
- ASTM D1275-15 Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids
- ASTM A604/A604M-07 Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
- ASTM A604/A604M-07(2012) Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
- ASTM D3310-00(2023) Standard Test Method for Determining Corrosivity of Adhesive Materials
- ASTM D1743-13 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
- ASTM D3482-90(2000) Standard Test Method for Determining Electrolytic Corrosion of Copper by Adhesives
- ASTM G104-89(1993) Test Method for Assessing Galvanic Corrosion Caused by the Atmosphere (Withdrawn 1998)
- ASTM G51-95(2000) Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
- ASTM G51-18 Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
- ASTM G51-95(2012) Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
- ASTM G61-86(2009) Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
- ASTM D4048-02(2008) Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
- ASTM D3310-00(2006) Standard Test Method for Determining Corrosivity of Adhesive Materials
- ASTM D1743-94e1 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
- ASTM D1743-01 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
- ASTM D3310-00 Standard Test Method for Determining Corrosivity of Adhesive Materials
- ASTM D4048-19 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
- ASTM D7548-16a Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
- ASTM D4048-19a Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
- ASTM D4048-16 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
- ASTM G69-12 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
- ASTM D3310-00(2014) Standard Test Method for Determining Corrosivity of Adhesive Materials
- ASTM D849-97 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
- ASTM D849-02 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
- ASTM D849-09 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
- ASTM D849-11 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
- ASTM F3044-14 Test Method for Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants
- ASTM D7671-10e1 Standard Test Method for Corrosiveness to Silver by Automotive Sparkndash;Ignition Engine Fuelndash;Silver Strip Method
- ASTM D849-05 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
- ASTM D849-03 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
- ASTM D1743-21 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
- ASTM D4048-02 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
- ASTM D1743-10 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
- ASTM D7548-09 Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
- ASTM D4048-10 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
- ASTM D1743-13(2018) Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
- ASTM D4048-16e1 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
- ASTM D7548-15 Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
- ASTM D7667-10e1 Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuelmdash;Thin Silver Strip Method
- ASTM D7667-10e2 Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuelmdash;Thin Silver Strip Method
- ASTM B380-97(2023) Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
- ASTM B380-97(2013) Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
- ASTM D7548-16A(2022)e1 Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
- ASTM D7548-22 Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
- ASTM D7671-10(2015) Standard Test Method for Corrosiveness to Silver by Automotive Spark&x2013;Ignition Engine Fuel&x2013;Silver Strip Method
- ASTM B380-97(2008)e1 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
- ASTM G48-03 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
- ASTM G48-03(2009) Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
- ASTM D6525/D6525M-18(2023) Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products
- ASTM B808-10 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
- ASTM D6525/D6525M-17 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products
- ASTM D849-15 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
- ASTM D7548-16 Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
- ASTM D8485-23 Standard Test Method for Corrosion Test for Electric Vehicle Coolants in Glassware
- ASTM G48-00 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
- ASTM G48-99A Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
- ASTM G48-11(2015) Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
- ASTM F3044-20 Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants
- ASTM D6470-99(2004) Standard Test Method for Salt in Crude Oils (Potentiometric Method)
- ASTM D6470-99 Standard Test Method for Salt in Crude Oils (Potentiometric Method)
- ASTM D130-04e1 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
- ASTM D130-04 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
- ASTM D130-19 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
- ASTM D130-12 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
- ASTM D130-18 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
- ASTM D2776-79e1 Standard Test Methods for Corrosivity of Water in the Absence of Heat Transfer (Electrical Methods)
- ASTM F897-84(1997) Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws
- ASTM D4310-03 Standard Test Method for Determination of the Sludging and Corrosion Tendencies of Inhibited Mineral Oils
- ASTM D4310-06b Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
- ASTM D4310-06a Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
- ASTM D4310-06 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
- ASTM A1071/A1071M-11 Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
- ASTM F897-19 Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws
- ASTM D1838-16 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
- ASTM G96-90(2018) Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)
- ASTM D6138-16 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)
- ASTM D8031-16 Standard Test Method for Acid Number of Terephthalic Acid (TA) by Automatic Potentiometric Titration
- ASTM D2132-12(2018) Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
- ASTM D2132-98 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
- ASTM D2132-03 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
- ASTM D2132-11 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
- ASTM D2132-19 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
- ASTM D2132-12 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
- ASTM D6688-01 Standard Test Method for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Method
- ASTM D130-10 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
- ASTM D4310-20 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
- ASTM D4310-20a Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
- ASTM D5968-04 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121176;C
- ASTM D4310-22 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
- ASTM D4310-22a Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
- ASTM B808-10(2020) Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
- ASTM G96-90(2013) Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)
- ASTM G5-94(2004) Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
- ASTM G5-94(1999)e1 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
- ASTM D7087-05 Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments
- ASTM D7087-05a Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments
- ASTM D7087-05a(2010) Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments
- ASTM D5852-00(2007) Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method
- ASTM D5852-95 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method
- ASTM D5852-00 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method
- ASTM B380-97(2018) Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
- ASTM D4778-94(1999)e1 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions
- ASTM G28-22 Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
- ASTM B808-05 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
- ASTM D4778-15 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions
Korean Agency for Technology and Standards (KATS), Self-corrosion potential test method
- KS D 0270-2007 Test methods for critical crevice temperature and/of stainless steels
- KS D ISO 17475-2017(2022) Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
- KS F 2712-2018 Standard test method for corrosion potentials of uncoated reinforcing steel in concrete
- KS C IEC 60426-2008(2018) Test methods for determining electrolytic corrosion with insulating materials
- KS D 0238-2004 Method of pitting potential measurement for stainless steels
- KS D 0238-2004(2019) Method of pitting potential measurement for stainless steels
- KS D 0238-1982 Method of pitting potential measurement for stainless steels
- KS D 0288-2009 Test method for corrosion of decorative electrodeposited coatings by the Corrodkote procedure
- KS D ISO 17475:2008 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
- KS D ISO 17475:2017 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
- KS M 0102-1991
- KS I 3207-2010(2015) Testing method for corrosivity of industrial water
- KS D 0277-2005 Standard guide for conducting and evaluating galvanic corrosion tests in electrolytes
- KS D 0277-2014 Standard guide for conducting and evaluating galvanic corrosion tests in electrolytes
- KS C 0248-60-2013 Environmental testing－Part 2：Tests－ Test Ke：Flowing mixed gas corrosion test
- KS C IEC 60426:2008 Test methods for determining electrolytic corrosion with insulating materials
- KS D 0269-2020 Potentiostatic polarization test method for determination of critical pitting temperature for stainless steels
- KS C 0248-60-2005 Environmental testing-Part 2:Tests- Test Ke:Flowing mixed gas corrosion test
- KS D 0269-2009 Potentiostatic polarization test method for determination of critical pitting temperature for stainless steels
- KS D 0288-2018 Test method for corrosion of decorative electrodeposited coatings by the Corrodkote procedure
- KS D 0280-2005 Standard test method for conducting cyclic potentiodynamic polarization measurements for localized corrosion susceptibility of iron-, nickel-, or cobalt-based alloys
- KS D 0280-2020 Standard test method for conducting cyclic potentiodynamic polarization measurements for localized corrosion susceptibility of iron-, nickel-, or cobalt-based alloys
- KS F 2903-2008 Test methods for air erosion of sprayed fire resistive material applied to structural members
- KS I 3208-2006 Testing method of scale and corrosiondeposit material by water
- KS M 2243-2010(2020) Testing method for metal corrosiveness of air filter oil
- KS F 2600-2008(2018) Standard test method for corrosion evaluation of reinforcing bar by image analysis method
- KS M 3045-2018 Testing methods for chemical resistance of plastics under constant tensile load
- KS D 0289-2009 Test methods for determination of resistance to pitting and crevice corrosion of metallic materials for surgical implants
- KS K 0854-2011 Test method for simulation of wear and corrosion for the detection of nickel release from coated items:Alternate exposure
- KS C IEC 60793-1-33:2020 Optical fibres — Part 1-33: Measurement methods and test procedures — Stress corrosion susceptibility
- KS C IEC 60793-1-33:2014 Optical fibres — Part 1-33: Measurement methods and test procedures — Stress corrosion susceptibility
- KS D 0289-2018 Test methods for determination of resistance to pitting and crevice corrosion of metallic materials for surgical implants
- KS C 2140-2003 Standards of testing method forphase transition temperature of ferroelectrics
- KS C 6424-1999(2020) Test methods of potentiometers for use in electronic equipment
- KS K 0854-2017 Test method for simulation of wear and corrosion for the detection of nickel release from coated items：Alternate exposure
Japanese Industrial Standards Committee (JISC), Self-corrosion potential test method
- JIS G 0577:1981 Method of pitting potential measurement for stainless steels
- JIS G 0592:2002 Method of determining the repassivation potential for crevice corrosion of stainless steels
- JIS G 0577:2005 Method of pitting potential measurement for stainless steels
- JIS G 0577:2014 Methods of pitting potential measurement for stainless steels
- JIS H 0541:2003 Method of alkaline salt corrosion testing for magnesium and magnesium alloys
- JIS T 0305:2002 Testing method for galvanic corrosion in pseudo physiological solution
- JIS R 2214:1995 Testing method for slag corrosion of refractories using crucibles
- JIS Z 2294:2004 Method for high-temperature electrochemical corrosion test of metallic materials in molten salts
- JIS A 1509-10:2008 Test methods for ceramic tiles -- Part 10: Determination of chemical resistance
- JIS T 0302:2000 Testing method for corrosion resistance of metallic biomaterials by anodic polarization measurement
PL-PKN, Self-corrosion potential test method
- PN H04682-1970 Corrosion protection Temporary corrosion preventives Test methodes
- PN C45051-06-1986 Higher alkohols fats Methods of test Determination of carbonyl value Potentiometric method
AENOR, Self-corrosion potential test method
- UNE 112083:2010 Measurement of free corrosion potential on steel reinforced concrete structures
- UNE-EN ISO 17475:2009 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005/Cor 1:2006)
- UNE-EN ISO 9455-15:1999 SOFT SOLDERING FLUXES - TEST METHODS - PART 15: COPPER CORROSION TEST (ISO 9455-15:1996)
- UNE 83952:2008 Concrete durability. Water for mixing and aggresives waters. Determination of the pH. Potentiometric method.
- UNE-EN 3026:1996 AEROSPACE SERIES. TEST METHOD FOR DRY FILM LUBRICANTS. CORROSION TEST ON STEELS SPECIMENS.
- UNE-EN 480-14:2007 Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test
- UNE 112015:1994 BIOLOGICAL CORROSION. EXPERIMENTAL METHOD FOR PIT POTENTIAL DETERMINATION IN STATINLESS STEEL, USING SULFATE REDUCING BACTERIA CULTURES BY MEANS OF THE POTENTIODYNAMIC ANODIC POLARIZATION TECHNIQUE.
- UNE-EN ISO 22775:2005 Footwear - Test methods for accessories: metallic accessories - Corrosion resistance (ISO 22775:2004)
- UNE 83992-1:2012 EX Durability of concrete. Test methods. Chloride penetration tests on concrete. Part 1: Accelerated natural method for determining the time to corrosion.
- UNE 80213:2010 Methods of cement testing. Potentiometric determination of chlorides
- UNE-EN 3665:1998 AEROSPACE SERIES. TEST METHODS FOR PAINTS AND VARNISHES. FILIFORM CORROSION RESISTANCE TEST ON ALUMINIUM ALLOYS.
- UNE-EN 15183:2007 Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test
Professional Standard - Petroleum, Self-corrosion potential test method
GM North America, Self-corrosion potential test method
International Organization for Standardization (ISO), Self-corrosion potential test method
- ISO 17475:2005 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
- ISO 22858:2020 Corrosion of metals and alloys — Electrochemical measurements — Test method for monitoring atmospheric corrosion
- ISO 17475:2005/cor 1:2006 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements; Technical Corrigendum 1
- ISO 15158:2014 Corrosion of metals and alloys - Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
- ISO/TR 16208:2014 Corrosion of metals and alloys - Test method for corrosion of materials by electrochemical impedance measurements
- ISO 9455-15:2017 Soft soldering fluxes — Test methods — Part 15: Copper corrosion test
- ISO 4905:2023 Corrosion of metals and alloys — Electrochemical test methods for high-temperature corrosion testing of metallic materials in molten salts
- ISO/PRF TR 16203:2023 Overview of methods available for particle-free erosion corrosion testing in flowing liquids
- ISO/TR 16203:2023 Overview of methods available for particle-free erosion corrosion testing in flowing liquids
- ISO 24020:2022 Corrosion of metals and alloys — Standard test method for particle-free erosion corrosion of metallic materials by jet-in-slit
- ISO 13573:2012 Corrosion of metals and alloys - Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials
- ISO 21608:2012 Corrosion of metals and alloys - Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials
- ISO/FDIS 4631:2023 Corrosion of Metals and Alloys — Measurement of the Electrochemical Critical Localized Corrosion potential (E-CLCP) for Ti Alloys Fabricated via Additive Manufacturing Method in Simulated Biomedical Solutions
- ISO 4631:2023 Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion potential (E-CLCP) for Ti alloys fabricated via additive manufacturing method in simulated biomedical solutions
KR-KS, Self-corrosion potential test method
- KS D ISO 17475-2017 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
- KS D ISO 17475-2023 Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
- KS D 0288-2018(2023) Test method for corrosion of decorative electrodeposited coatings by the Corrodkote procedure
- KS C IEC 60793-1-33-2020 Optical fibres — Part 1-33: Measurement methods and test procedures — Stress corrosion susceptibility
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Self-corrosion potential test method
- GB/T 24196-2009 Corrosion of metals and alloys.Electrochemical test methods.Cuidelines for conducting potentiostatic and potentiodynamic polarization measurements
- GB/T 5252-1985 Germanium monocrystal--Inspection of dislocation etch pit density
- GB/T 5252-2006 Germanium monocrystal.Inspection of dislocation etch pit density
- GB/T 37619-2019(英文版) Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes
- GB/T 17899-2023 Corrosion of metals and alloys - Potentiodynamic measurement of pitting potential of stainless steel in sodium chloride solution
- GB/T 11297.6-1989 Standard method for showing and measuring dislocation etch pits in Indium Antimonide single crystal
- GB/T 29088-2012 Corrosion of metals and alloys.Electrochemical potentiokinetic reactivation measurement using the double loop method
- GB/T 17899-1999 Method of pitting potential measurement for stainless steels
- GB/T 15333-1994 Test method for electolysis corrosion of electrical insulating adhesive tapes
- GB/T 22316-2008 Test methods of corrosion resistance for electrolytic tinplate
- GB/Z 41259-2022 Method for determination of quaternary ammonium compounds in preservative-treated wood and wood preservatives by potentiometric titrator
- GB/T 26066-2010 Practice for shallow etch pit detection on silicon
- GB/T 15748-1995 The method of galvanic corrosion test for metallic ship materials
- GB/T 13671-1992 Stainless steels.Method of electrochemical test for crevice corrosion
- GB/T 15748-2013 The method of galvanic corrosion test for metallic ship materials
- GB/T 25147-2010 Test method of metal corrosion amount and corrosion rate of chemical cleaning for industrial equipment.Gravimetric method
- GB/T 32026-2015 Silver coated glass mirror.Environmental corrosion resistance test methods
- GB/T 10582-1989 Test methods for determining electrolytic corrosion with insulating materials
- GB/T 2951.27-1994 Test method for determining mechanical and physical properties of electric cables and wires. Corrosion spread test
- GB/T 27828-2011 Chemicals. Test method of in vitro skin corrosion. Transcutaneous electrical resistance test(TER)
- GB/T 10582-2008 Electrical insulating materials.Test methods for determining of electrolytic corrosion caused by insulating materials
- GB/T 41951-2022 Corrosion of metals and alloys—Test method for the corrosion resistance of construction steel joint and member
- GB/T 5170.11-2008 Inspection methods for environmental testing equipments for electric and electronic products.Corrosive gas testing equipments
- GB/T 3810.13-2016 Test methods of ceramic tiles.Part 13: Determination of chemical resistance
- GB/T 3810.13-1999 Test methods of ceramic tiles-- Part 13: Determination of chemical resistance
- GB/T 3810.13-2006 Test methods of ceramic tiles - Part 13: Determination of chemical resistance
- GB/T 7993-2003 Vitreous and porcelain enamel--Enamelled articles for service under highly corrosive conditions-High voltage test
- GB/T 2951.25-1994 Test method for determining mechanical and physical properties of electric cables and wires. Test for anaerobe-corrosion of protective coverings
- GB/T 5170.11-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Corrosive gas testing equipments
- GB/T 2423.51-2000 Environmental testing for electric and electronic products-Part 2:Test methods-Test Ke:Flowing mixed gas corrosion test
German Institute for Standardization, Self-corrosion potential test method
- DIN EN ISO 17475:2008-07 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005+Cor. 1:2006); German version EN ISO 17475:2008
- DIN EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005+Cor. 1:2006); English version of DIN EN ISO 17475:2008-07
- DIN EN ISO 10271:2020-12 Dentistry - Corrosion test methods for metallic materials (ISO 10271:2020); German version EN ISO 10271:2020
- DIN EN ISO 9455-15:2017-12 Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:2017); German version EN ISO 9455-15:2017
- DIN EN ISO 7539-7:2018-05 Corrosion of metals and alloys - Stress corrosion testing - Part 7: Method for slow strain rate testing (ISO 7539-7:2005); German version EN ISO 7539-7:2005
- DIN EN ISO 12732:2008-07 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006); German version EN ISO 12732:2008
- DIN EN 1670 Berichtigung 1:2008-07 Building hardware - Corrosion resistance - Requirements and test methods; German version EN 1670:2007, Corrigendum to DIN EN 1670:2007-06; German version EN 1670:2007/AC:2008
- DIN EN 1670:2007-06 Building hardware - Corrosion resistance - Requirements and test methods; German version EN 1670:2007
- DIN EN ISO 22775:2005-03 Footwear - Test methods for accessories: Metallic accessories - Corrosion resistance (ISO 22775:2004); German version EN ISO 22775:2004
- DIN EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods (IEC 60426:2007); German version EN 60426:2007
- DIN EN ISO 9455-15:2017 Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:2017)
- DIN EN 3026:1994-04 Aerospace series; test method for dry film lubricants; corrosion test on steels specimens; German version EN 3026:1994
- DIN EN ISO 10289:2001-04 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests (ISO 10289:1999); German version EN ISO 10289:2001
- DIN EN 3841-402:2005-09 Aerospace series - Circuit breakers - Test methods - Part 402: Corrosion; German and English version EN 3841-402:2004 / Note: Applies in conjunction with DIN EN 3841-100 (2005-09).
- DIN EN 480-14:2007-03 Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test; German version EN 480-14:2006
- DIN EN 15183:2006-11 Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test; German version EN 15183:2006
SE-SIS, Self-corrosion potential test method
- SIS SS IEC 426:1982 Test methods for determining electrolytic corrosion with insulating materials
CU-NC, Self-corrosion potential test method
- NC 12-04-51-1988 Standards System for Protection Against Corrosion. Corrosion of Concrete Reinforcing Steel Electrochemical Testing Method
- NC 12-04-52-1990 Standards System for Protection Against Corrosion. Corrosión Tests. Methods for Results Evaluation
- NC 12-04-04-1989 Standards System for Protection Against Corrosion. Corrosion Testing Methods. General Requirements
British Standards Institution (BSI), Self-corrosion potential test method
- BS ISO 22858:2020 Corrosion of metals and alloys. Electrochemical measurements. Test method for monitoring atmospheric corrosion
- BS 5735:1979 Test methods for determining electrolytic corrosion with electrical insulating materials
- 19/30367053 DC BS ISO 22858. Corrosion of metals and alloys. Electrochemical measurements. Test method for monitoring atmospheric corrosion
- PD ISO/TR 16208:2014 Corrosion of metals and alloys. Test method for corrosion of materials by electrochemical impedance measurements
- BS EN ISO 17475:2006 Corrosion of metals and alloys. Electrochemical test methods. Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
- BS EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
- BS PD ISO/TR 16208:2014 Corrosion of metals and alloys. Test method for corrosion of materials by electrochemical impedance measurements
- BS ISO 15158:2014 Corrosion of metals and alloys. Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
- BS EN ISO 7539-5:1995 Corrosion of metals and alloys. Stress corrosion testing. Method for the preparation and use of C-ring specimens
- BS EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insuating materials - Test methods
- BS ISO 4905:2023 Corrosion of metals and alloys. Electrochemical test methods for high-temperature corrosion testing of metallic materials in molten salts
- BS EN IEC 60794-1-220:2022 Optical fibre cables - Generic specification. Basic optical cable test procedures. Environmental test methods. Salt spray corrosion test, method F20
- BS ISO 13573:2012 Corrosion of metals and alloys. Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials
- BS ISO 21608:2012 Corrosion of metals and alloys. Test method for isothermalexposure oxidation testing under high-temperature corrosion conditions for metallic materials
- BS EN 60793-1-33:2002 Optical fibres - Measurement methods and test procedures - Stress corrosion susceptibility - Section 33 Stress corrossion susceptibility
- PD IEC/TR 62697-2:2018 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids. Test method for quantitative determination of total corrosive sulfur (TCS)
- 22/30419358 DC BS ISO 4905. Corrosion of metals and alloys. Electrochemical test methods. Guideline for electrochemical measurements in high temperature molten salts
- PD ISO/TR 16203:2023 Tracked Changes. Overview of methods available for particle-free erosion corrosion testing in flowing liquids
- BS ISO 17248:2015 Corrosion of metals and alloys. Test method for high temperature corrosion testing of metallic materials by embedding in salt, ash, or other solids
- BS EN 3475-503:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Scrape abrasion
- BS EN 60793-1-33:2017 Tracked Changes. Optical fibres. Measurement methods and test procedures - Stress corrosion susceptibility
- 22/30432417 DC BS ISO 4631. Corrosion of Metals and Alloys. Measurement of the Electrochemical Critical Localized Corrosion potential (E-CLCP) for Ti Alloys Fabricated via Additive Manufacturing Method in Simulated Biomedical Solutions
- BS 2000-315:1998 Methods of test for petroleum and its products - Petroleum products - Electrical insulating oils - Detection of corrosive sulfur
- BS ISO 17224:2015 Corrosion of metals and alloys. Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances
- BS 2000-112:2005+A1:2014 Methods of test for petroleum and its products. Determination of corrosiveness to copper of lubricating grease. Copper strip method
- BS 2000-112:2005 Methods of test for petroleum and its products - Part 112: Determination of corrosiveness to copper of lubricating grease - Copper strip method (Identical with IP 112:2005)
- BS 2000-112:2006 Methods of test for petroleum and its products. Determination of corrosiveness to copper of lubricating grease. Copper strip method
- PD IEC TS 60695-5-2:2021 Fire hazard testing. Corrosion damage effects of fire effluent. Summary and relevance of test methods
- 20/30429086 DC BS EN IEC 60794-1-220. Optical fibre cables. Part 1-220. Generic specification. Basic optical cable test procedures. Environmental test methods. Salt spray Corrosion test, Method F20
- BS ISO 17245:2015 Corrosion of metals and alloys. Test method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditions
- 12/30260379 DC BS EN 61196-1-111. Coaxial communication cables. Electrical test methods. Stability of phase test methods
国家市场监督管理总局、中国国家标准化管理委员会, Self-corrosion potential test method
- GB/T 37619-2019 Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes
- GB/T 40299-2021 Corrosion of metals and alloys—Conventions applicable to electrochemical measurements in corrosion testing
- GB/T 37617-2019 Test methods for Zeta potential of nanofiltration membrane surface—Streaming potential measurement
Association Francaise de Normalisation, Self-corrosion potential test method
- NF A05-403*NF EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements.
- FD A05-313*FD ISO/TR 16208:2014 Corrosion of metals and alloys - Test method for corrosion of materials by electrochemical impedance measurements
- NF EN ISO 9455-15:2017 Flux de brasage tendre - Méthodes d'essai - Partie 15 : essai de corrosion du cuivre
- NF A05-207*NF ISO 15158:2014 Corrosion of metals and alloys - Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
- NF C26-260:1974 Methods of testings insulating materials test methods for determining electrolytic corrosion with insulating materials.
- NF R15-602-8:1991 Road vehicles. Cooling fluids. Test methods. Part 8 : measurement of corrosion protection properties. Hot plate corrosion method.
- NF R15-602-7:1991 Road vehicles. Cooling fluids. Test methods. Part 7 : measurement of corrosion protection properties. Glassware corrosion method.
- NF EN 1670:2007 Quincaillerie pour le bâtiment - Résistance à la corrosion - Exigences et méthodes d'essai
- NF C26-260*NF EN 60426:2016 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
- NF ISO 4905:2023 Corrosion des métaux et alliages - Méthodes d'essais électrochimiques de corrosion à haute température de matériaux métalliques dans des sels fondus
- NF C93-850-1-220*NF EN IEC 60794-1-220:2022 Optical fibre cables - Part 1-220 : generic specification - Basic optical cable test procedures - Environmental test methods - Salt spray corrosion test, method F20
- NF EN 3841-402:2005 Série aérospatiale - Disjoncteurs - Méthodes d'essais - Partie 402 : corrosion
- NF EN 480-14:2006 Adjuvants pour béton, mortier et coulis - Méthodes d'essais - Partie 14 : détermination de l'effet sur la tendance à la corrosion de l'acier pour armature au moyen d'un essai electrochimique potentiostatique
- NF EN 60793-1-33:2017 Fibres optiques - Partie 1-33 : méthodes de mesure et procédures d'essai - Résistance à la corrosion sous contrainte
- NF R15-602-9:1991 Road vehicles. Cooling fluids. Test methods. Part 9 : measurement of corrosion protection properties. Grid leak resistor method.
- NF C20-453:1985 Basic environmental testing procedures. Test methods. Conventional determination of corrosiveness of smoke.
- NF EN 13523-27:2017 Tôles prélaquées - Méthodes d'essai - Partie 27 : résistance à la corrosion sous cataplasme (essai au cataplasme)
- UTE C27-251U*UTE C27-251:1987 Liquid dielectrics. Conventional assessment of smoke corrosiveness by measurements of ph-value and resistivity. Test method.
- NF C93-840-1-33*NF EN 60793-1-33:2017 Optical fibres - Part 1-33 : measurement methods and test procedures - Stress corrosion susceptibility
- NF B10-602-10*NF EN 14617-10:2012 Agglomerated stone - Test methods - Part 10 : determination of chemical resistance.
- NF EN 17737:2022 Quincaillerie d'ameublement - Méthodes d'essai et d'évaluation de la résistance à la corrosion des ferrures de meubles
- UTE C27-251:1987 Diélectriques liquides - Appréciation conventionnelle de la corrosivité des fumées par mesure de pH et de résistivité - Méthode d'essai
- NF R15-602-7:2020 Road vehicles - Test methods of cooling fluids - Part 7 : measurement of corrosion protection properties - Corrosion test in glassware
- NF EN 62535:2009 Liquides isolants - Méthode d'essai pour la détection du soufre potentiellement corrosif dans les huiles usagées et neuves
- NF C26-221:1986 Methods of testing isulating materials. Test methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions.
- NF C27-251:1987 Liquid dielectrics
Conventional assessment of smoke corrosiveness by measurements of pH-value and resistivity
Test method
- NF EN 61302:1995 Matériaux isolants électriques - Méthode d'évaluation de la résistance au cheminement et à l'érosion - Essai au volant rotatif à immersion.
European Committee for Standardization (CEN), Self-corrosion potential test method
- EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
Danish Standards Foundation, Self-corrosion potential test method
- DS/EN ISO 17475:2009 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
- DS/EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
- DS/EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
- DS/EN 480-14:2007 Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test
- DS/EN 60793-1-33:2002 Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility
- DS/EN 61302:1996 Electrical insulating materials - Method to evaluate the resistance to tracking and erosion - Rotating wheel dip test
ECIA - Electronic Components Industry Association, Self-corrosion potential test method
- 186-5E-1978 Passive Electronic Component Parts@ Test Methods for; Method 5: Salt Spray (Corrosion)
IN-BIS, Self-corrosion potential test method
Lithuanian Standards Office , Self-corrosion potential test method
- LST EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005/Cor 1:2006)
- LST EN ISO 9455-15:2000 Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:1996)
- LST EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006)
- LST EN 60426-2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods (IEC 60426:2007)
- LST EN 480-14-2007 Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test
- LST EN ISO 22775:2005 Footwear - Test methods for accessories: Metallic accessories - Corrosion resistance (ISO 22775:2004)
- LST EN 61302-2002 Electrical insulating materials. Method to evaluate the resistance to tracking and erosion. Rotating wheel dip test (IEC 61302:1995+AC:1995)
American National Standards Institute （ANSI), Self-corrosion potential test method
- ANSI/ASTM B826:1996 Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
- ANSI/ASTM D5485:2011 Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
- ANSI/SCTE 11-2012 Test Method for Aerial Cable Corrosion Protection Flow
- ANSI/ASTM D2132:2012 Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
- ANSI/ASTM D4340:1998 Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants under Heat-Rejecting Conditions
Electronic Components, Assemblies and Materials Association, Self-corrosion potential test method
- ECA 186-5E-1978 Passive Electronic Component Parts, Test Methods for; Method 5: Salt Spray (Corrosion)
Professional Standard - Medicine, Self-corrosion potential test method
- YY/T 0695-2008 Standard test method for conducting cyclic potentiodynamic polarization measurements to determine the corrosion susceptibility of small lmplant devices
Indonesia Standards, Self-corrosion potential test method
- SNI 07-1334-1989 Well corrosion, Evaluation test method
- SNI 07-6217-2000 Testing methods of metal laboratory corrosion
- SNI 07-0500-1989 Metal corrosion in atmospheric environment, Test method
- SNI 06-0708-1989 Petroleum products and their derivatives, Test method for corrosion against copper
- SNI 03-6879-2002 Test methods for pH of soil for use in metal corrosion testing
- SNI 07-0413-1989 Test method for corrosion resistance by salt fog spray
- SNI 07-0478-1989 Accelerated corrosion resistance by acetic acid salt fog spray, Testing method
- SNI 09-3271-1994 Test method for removing corrosin adhesion from ferro metal surface against motor vehicle brake lining
- SNI 07-0479-1989 Accelerated corrosion resistance by acetic acid salt-copper salt fog spray, Test method
- SNI 07-0660-1989 Corrosion test specimens, Method of preparation, cleaning and evaluation
- SNI 18-2031-1990 Nuclear Electric Power Plant, Guide for determination of location
CZ-CSN, Self-corrosion potential test method
- CSN 03 8104-1986 Protection.against corrosion. Metals and alloys. Methods of evaluation of corro-sion tests
- CSN 49 0681 Cast.2-1987 Tests of wood preservatives corrosive action testing. Method of determining the corrosive effects of protected wood on metals
- CSN IEC 426:1993 Test methode for determining electrolytic corrosion with insulating materials
- CSN 49 0681 Cast.1-1986 Testing of wood preservatives. Corrosion test. Method for determination of corrosion effect to metal by immersion in solution
- CSN 03 8145-1992 Corrosion protection. Non-metallic polymere materials. Methods of laboratory and accelerated tests of corrosivity
- CSN 03 8165-1985 Protection against corrosion. Electrode-posited metallic coatings. Methods for testing adhesion
- CSN 47 0011-1985 Agricultural and forest machines and tractors. Corrosion prevention testing methods
- CSN 03 8110-1984 Protection against corrosion Metals, alloys, metallic and non-metallic inorganic coatings Methods of atmospheric corrosion field tests
- CSN ISO 3613:1992 Corrosion protection. ChromAte conversion coatings on zinc and cadmium. Test methods
- CSN 03 8551-1984 Corrosion protection. Aluminium and zinc coatings. Marking, technical require-ments and testing methods
- CSN 58 8792-1994 Methods of test for fats and oils Determination of hydroxyvalue with potentiometric indication
- CSN 03 8630-1987 Protection against corrosion. Chromating of electroplated zinc and eadmium coatings. Teohnical reqnirements and test methods
- CSN 58 8764-1994 Methods of test for fats and oils Determination of saponification value with potentiometric indication
Aerospace Industries Association/ANSI Aerospace Standards, Self-corrosion potential test method
AIA/NAS - Aerospace Industries Association of America Inc., Self-corrosion potential test method
Aerospace Industries Association, Self-corrosion potential test method
Group Standards of the People's Republic of China, Self-corrosion potential test method
- T/CSTM 00046.12-2018 Corrosion test of low alloy structure steels Part 12: The test method of galvanic corrosion
- T/CSTM 00046.15-2018 Corrosion test of low alloy structure steels -- Part 15: The test method of electrochemistry corrosion
- T/CSTM 00046.16-2018 Corrosion test of low alloy structure steels -- Part 16: Guide for localized electrochemical corrosion test method
- T/CSTM 00043.13-2018 Atmospheric corrosion test — Part 13: Monitoring method of air contaminants for corrosion tests
- T/CASAS 013-2021 Measuring method for testing the density of dislocation in SiC crystal Combined KOH etching and image recognition methods
- T/CBCSA 31-2020 Test method for ceramic tiles - Determination of resistance to chemical attack
- T/CSCP 0035.15-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 15: Electrochemical Test Methods for Corrosion of Low Alloy Structural Steels
- T/CSCP 0035.12-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 12: Test Methods for Galvanic Corrosion of Low Alloy Structural Steels
- T/CNS 18-2020 Test method for galvanic corrosion of metallic materials in high temperature and high pressure water for nuclear power plants
- T/CSCP 0035.16-2017 Laboratory corrosion tests on low-alloy structural steels-Part 16: Electrochemical test methods for micro-corrosion of low-alloy structural steels
- T/CSCP 0016-2017 Monitoring Method of Air Pollutant Content in Atmospheric Environment Corrosion Test
- T/CNS 4-2018 Corrosion fatigue test method in high temperature high pressure water for metallic materials used in nuclear power plants
- T/CSTM 00648-2021 Test method for synergistic effect of electrochemical corrosion-abrasive wear of metallic materials
- T/CNS 14-2019 Test method of crevice corrosion in high temperature pressurized water for metallic materials used in nuclear power plants
- T/WJDGC 0005-2021 Test method for automatic rice cooker insulation sheet
Professional Standard - Aerospace, Self-corrosion potential test method
- QJ 1323.2-1987 Electromagnetic relay test method salt spray (corrosion) test
- QJ 494-1986 Method of evaluation after corrosion test of electroplated specimens for cathodic coatings
US-ACEI, Self-corrosion potential test method
ES-UNE, Self-corrosion potential test method
- UNE-EN ISO 10271:2021 Dentistry - Corrosion test methods for metallic materials (ISO 10271:2020)
- UNE-EN ISO 9455-15:2018 Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:2017)
- UNE-EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006) (Endorsed by AENOR in June of 2008.)
- UNE-EN 1670:2007/AC:2008 Building hardware - Corrosion resistance - Requirements and test methods
- UNE-EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods (IEC 60426:2007). (Endorsed by AENOR in April of 2007.)
- UNE-EN IEC 60794-1-220:2022 Optical fibre cables - Part 1-220: Generic specification - Basic optical cable test procedures - Environmental test methods - Salt spray corrosion test, method F20 (Endorsed by Asociación Española de Normalización in May of 2022.)
- UNE-EN 3841-402:2004 Aerospace series - Circuit breakers - Test methods - Part 402: Corrosion (Endorsed by AENOR in April of 2005.)
- UNE-EN 60793-1-33:2018 Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility
- UNE-EN IEC 60587:2022 Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion (Endorsed by Asociación Española de Normalización in June of 2022.)
Electronic Industrial Alliance (U.S.), Self-corrosion potential test method
- EIA RS-186-5E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC COMPONENT PARTS METHOD 5: SALT SPRAY (CORROSION)
YU-JUS, Self-corrosion potential test method
- JUS B.H8.232-1991 Electrical insulating oils - Method for the detection of corrosive sulphur
- JUS N.A5.006-1980 Test methods f'or ?etemtining electrolvtk corrosion with insulating materials
- JUS N.A5.145-1984 Testing of insulating materials for electrical purposes. Test method for evaluating tbe resistance to tracking and erosion, for materials used under severe ambient conditions
Military Standard of the People's Republic of China-General Armament Department, Self-corrosion potential test method
- GJB 17.20-1984 Aeronautical wire and cable test methods Corrosion effect test
- GJB 983.6-1993 Military Rubber Film Test Method for Determination of Metal Corrosion Effect
- GJB 1264.1-1991 Test methods for aerospace turbine engine lubricants - Determination of thermal stability and corrosivity
RO-ASRO, Self-corrosion potential test method
- STAS 9588-1974 Cables ANTI-CORROSION PROTECTIVE COVERINGS Methods for testing waterproofness
- STAS 9614/2-1984 POTENTIOMETERS Methods of test
- STAS 10904/1-1989 Fissuring corrosion test under tension of metallic materials TEST METHODS
- STAS 10368-1982 SOLID ELECTRICAL INSULATING MATERIALS Test methods for determining the electrolytic corrosion of metals in the presence of electrical insulating materials
RU-GOST R, Self-corrosion potential test method
- GOST R 50865-1996 Rails. Method for test on corrosion fatigue life
- GOST R 9.907-2007 Unified system of corrosion and ageing protection. Metals, alloys, metallic coatings. Methods for removal of corrosion products after corrosion tests
- GOST 2917-1976 Oils and additives. Method of test for corrosion influence on metals
- GOST R 52804-2007 Protection against corrosion of concrete and reinforced concrete constructions.Test methods
- GOST R 9.517-2003 Unified system of corrosion and ageing protection. Temporary rust protection of products. Test methods
- GOST R IEC 60793-1-33-2014 Optical fibres. Part 1-33. Measurement methods and test procedures. Stress corrosion susceptibility
GOSTR, Self-corrosion potential test method
BR-ABNT, Self-corrosion potential test method
GM Europe, Self-corrosion potential test method
International Electrotechnical Commission (IEC), Self-corrosion potential test method
- IEC 60426:1973 Test methods for determining electrolytic corrosion with insulating materials
- IEC 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
- IEC TR 62697-2:2018 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 2: Test method for quantitative determination of total corrosive sulfur (TCS)
- IEC 60793-1-33:2017 Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility
- IEC 60793-1-33:2001 Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility
Canadian General Standards Board （CGSB), Self-corrosion potential test method
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Self-corrosion potential test method
- GB/T 34481-2017 Test method for measuring etch pit density (EPD) in low dislocation density monocrystalline germanium slices
国家药监局, Self-corrosion potential test method
- YY/T 1772-2021 Test methods for galvanic corrosion in electrolytes for surgical implants
Shaanxi Provincial Standard of the People's Republic of China, Self-corrosion potential test method
- DB61/T 1276-2019 Test method for acid dew point of boiler low temperature corrosion flue gas
Standard Association of Australia （SAA）, Self-corrosion potential test method
- AS 1180.7G:1972 Methods of test for hose made from elastomeric materials - Corrosion resistance
- AS 2331.3.1:2001 Methods of test for metallic and related coatings - Corrosion and related property tests - Neutral salt spray (NSS) test
- AS 1774.35:2007 Refractories and refractory materials - Physical test methods - Guide to the determination of resistance to corrosive reagents
CENELEC - European Committee for Electrotechnical Standardization, Self-corrosion potential test method
- EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
AASHTO - American Association of State Highway and Transportation Officials, Self-corrosion potential test method
- T 289-1991 Standard Method of Test for Determining pH of Soil for Use in Corrosion Testing
- T 373M/T 373-2017 Standard Method of Test for Comparative Qualitative Corrosion Characterization of Steel Bars Used for Concrete Reinforcement (Linear Polarization Resistance and Potentiodynamic Polarization Tests)
Professional Standard - Military and Civilian Products, Self-corrosion potential test method
- WJ 2104-1993 Displacement and speed test method of firearm automatic machine
工业和信息化部, Self-corrosion potential test method
- HG/T 5938-2021 Determination of chloride ion content in humic acid fertilizers by automatic potentiometric titration
VN-TCVN, Self-corrosion potential test method
- TCVN 6607-2008 Aviation turbine fuels.Test method for determination of corrosiveness to silver
- TCVN 2694-2007 Petroleum products.Test method for detemination of corrosiveness to copper by copper strip test
未注明发布机构, Self-corrosion potential test method
- BS 5117-2.6:1992(1999) Testing corrosion inhibiting, engine coolant concentrate ("antifreeze") — Part 2 : Methods of test for corrosion inhibition performance — Section 2.6 Test for corrosion of cast aluminium alloys under heat - transfer conditions
- BS 5117-2.1:1985(1999) Testing corrosion inhibiting, engine coolant concentrate ("antifreeze") — Part 2 : Methods of test for corrosion inhibition performance — Section 2.1 General procedures
Professional Standard - Ferrous Metallurgy, Self-corrosion potential test method
- YB/T 4369-2014 Test method for the corrosion of steel bar embedded in concrete in chloride enviroment
PT-IPQ, Self-corrosion potential test method
- NP EN 1670-2000 Building hardware Corrosion resistance Requirements and test methods
Professional Standard - Electron, Self-corrosion potential test method
- SJ/T 10866-1996 Methods of measurement for electrical properties of disk-seal tubes - Methods of measurement for the frequency position
- SJ/T 10868-1996 Methods of measurement for electrical properties of disk-seal tubes - Methods of measurement for the self-neutralization frequency
Professional Standard - Machinery, Self-corrosion potential test method
- JB/T 10696.5-2007 Test methods for determining mechanical, physical and chemical properties of electric cables and wires Part 5: Corrosion spread test
European Association of Aerospace Industries, Self-corrosion potential test method
- AECMA PREN 2003-11-1986 Aerospace Series Test Methods for Austenitic Stainless Steels Part 11 - Determination of Resistance to Intergranular Corrosion by the Huey Method Issue P 1
国家食品药品监督管理局, Self-corrosion potential test method
- YY/T 1552-2017 Open circuit potential measurement method for evaluating long-term corrosion behavior of metallic implant materials and medical devices in surgical implants
Professional Standard - Automobile, Self-corrosion potential test method
- QC/T 76.2-1993 Test method of mine dump truck - Measurement method of driver's seat reference point R
ZA-SANS, Self-corrosion potential test method
- SANS 60793-1-33:2001 Optical fibres Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility
National Association of Corrosion Engineers (NACE), Self-corrosion potential test method
- NACE 1D196-1996 Laboratory Test Methods for Evaluating Oilfield Corrosion Inhibitors Item No. 24192
- NACE TM0198-2004 Slow Strain Rate Test Method for Screening Corrosion-Resistant Alloys (CRAs) for Stress Corrosion Cracking in Sour Oilfield Service Item No:21232
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Self-corrosion potential test method
- PREN 3841-402-1998 Aerospace Series Circuit Breakers Test Methods Part 402 : Corrosion (Edition P 2)
- PREN 3841-402-1996 Aerospace Series Circuit Breakers Test Methods Part 402 : Corrosion (Edition P 1)
- PREN 3841-402-2003 Aerospace Series Circuit Breakers Test Methods Part 402: Corrosion (Edition P 3)
Anhui Provincial Standard of the People's Republic of China, Self-corrosion potential test method
- DB34/T 2579-2015 Methods for chemical analysis of copper electrolytes - Determination of chlorine content - Automatic potentiometric titration
European Committee for Electrotechnical Standardization（CENELEC）, Self-corrosion potential test method
- EN 60793-1-33:2017 Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility