ZH
RU
ES

Flow Rate Regulations for Gas Propane

Flow Rate Regulations for Gas Propane, Total:76 items.

In the international standard classification, Flow Rate Regulations for Gas Propane involves: Equipment for entertainment, Tobacco, tobacco products and related equipment, Plastics, Power stations in general, Protection against dangerous goods, Fluid storage devices, Valves, Air quality, Pumps, Vacuum technology, Fluid power systems, Measurement of fluid flow, Protection of and in buildings, Metrology and measurement in general, Rotating machinery, Pipeline components and pipelines, Rectifiers. Convertors. Stabilized power supply, Fuels, Vibrations, shock and vibration measurements, Switchgear and controlgear, Ferrous metals.

American National Standards Institute （ANSI), Flow Rate Regulations for Gas Propane

ANSI Z21.62b-1985 Portable catalytic camp heaters for use with propane gas; Addenda
ANSI Z21.62a-1981 Portable catalytic camp heaters for use with propane gas; Addenda
ANSI/NFPA T3.21.3-1990 Pneumatic Fluid Power - Flow Rating Test Procedure and Reporting Method - for Fixed Orifice Components

Professional Standard - Tobacco, Flow Rate Regulations for Gas Propane

YC/T 540-2016 Cigarettes.Determination of ethylene oxide and propylene oxide in mainstream cigarette smoke.Gas chromatography-mass spectrometry method

Professional Standard - Commodity Inspection, Flow Rate Regulations for Gas Propane

SN/T 4182-2015 Determination of propylene oxide and epichlorohydrin monomers in imported epoxy coating.Headspace-gas chromatography

Group Standards of the People's Republic of China, Flow Rate Regulations for Gas Propane

T/CPCIF 0148-2021 Plastics—Ultrahigh melt fluidity polypropylene materials— Determination of melt volume-flow rate（MVR）and melt mass-flow rate（MFR）

Professional Standard - Electricity, Flow Rate Regulations for Gas Propane

DL/T 920-2019 Determination of air, carbon tetrafluoride, hexafluoroethane and octafluoropropane in sulfur hexafluoride gas by gas chromatography

Association Francaise de Normalisation, Flow Rate Regulations for Gas Propane

NF M88-779:2013 Installations for liquid hydrocarbons - Pressure regulators and automatic change-over devices for domestic butane- and propane-gas-burning installations having a regulated pressure of 4 bar and a flow rate less or equal to 100 kg/h
NF X10-515:1971 Vacuum technology. Vapour vacuum pumps. Measurement of the volume rate of flow (pumping speed).
NF X10-111:1988 Measurement of clean water flow in closed conduits. Velocity-area method using current-meters in full conduits and under regular flow conditions.
NF T51-038-2*NF EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2 : method for materials sensitive to time-temperature history and/or moisture
NF E49-160-1/A1*NF ISO 6358-1/A1:2020 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 1 : general rules and test methods for steady-state flow - Amendment 1 : effective conductance
NF E49-160-1*NF ISO 6358-1:2013 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 1: general rules and test methods for steady-state flow
NF ISO 6358-1:2013 Transmissions pneumatiques - Détermination des caractéristiques de débit des composants traversés par un fluide compressible - Partie 1 : règles générales et méthodes d'essai en régime stationnaire
NF EN ISO 13477:2008 Tubes en matières thermoplastiques pour le transport des fluides - Détermination de la résistance à la propagation rapide de la fissure (RCP) - Essai à petite échelle à état constant (essai S4)

Korean Agency for Technology and Standards (KATS), Flow Rate Regulations for Gas Propane

KS I ISO 10780-2008(2018) Stationary source emissions－Measurement of velocity and volume flowrate of gas streams in ducts
KS I ISO 14164:2006 Stationary source emissions－Determination of the volume flowrate of gas streams in ducts(Automated method)
KS C IEC 61800-4:2005 Adjustable speed electrical power drive systems－Part 4：General requirements－Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV
KS C IEC 61136-1:2002 Semiconductor power convertors-Adjustable speed eletcric drive systems-General requirements-Part 1 : Rating specifications, particularly for d.c. motor drives
KS C IEC 61136-1:2013 Semiconductor power convertors-Adjustable speed eletcric drive systems-General requirements-Part 1 : Rating specifications, particularly for d.c. motor drives
KS C IEC 61136-1-2002(2012) Semiconductor power convertors－Adjustable speed eletcric drive systems－General requirements－Part 1 : Rating specifications, particularly for d.c. motor drives
KS M ISO 13477-2013(2018) Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)

Professional Standard - Machinery, Flow Rate Regulations for Gas Propane

JB/T 8472.1-1996 Performance measurement of vapor flow vacuum pump Part 1: Determination of pumping rate (volume flow rate)

Japanese Industrial Standards Committee (JISC), Flow Rate Regulations for Gas Propane

JIS B 8390:2000 Pneumatic fluid power -- Components using compressible fluids -- Determination of flow-rate characteristics
JIS K 7210-2:2014 Plastics.Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics.Part 2: Method for materials sensitive to time-temperature history and/or moisture
JIS B 8390-1:2016 Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 1: General rules and test methods for steady-state flow
JIS B 8350-1:2003 Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 1: Pumps
JIS B 8350-2:2003 Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 2: Motors

International Organization for Standardization (ISO), Flow Rate Regulations for Gas Propane

ISO 14164:1999 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method
ISO 6358-1:2013 Pneumatic fluid power.Determination of flow-rate characteristics of components using compressible fluids.Part 1: General rules and test methods for steady-state flow
ISO 6358-3:2014 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 3: Method for calculating steady-state flow-rate characteristics of systems
ISO 12569:2017 Thermal performance of buildings and materials — Determination of specific airflow rate in buildings — Tracer gas dilution method
ISO 6358-2:2013 Pneumatic fluid power.Determination of flow-rate characteristics of components using compressible fluids.Part 2: Alternative test methods
ISO/CD 17778 Plastics piping systems — Fittings, valves and ancillaries — Determination of gaseous flow rate/pressure drop relationships
ISO 17778:2015 Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships
ISO 1133-2:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
ISO 18582-2:2018 Fluid power — Specification of reference dictionary — Part 2: Definitions of classes and properties of pneumatics

British Standards Institution (BSI), Flow Rate Regulations for Gas Propane

BS ISO 6358-3:2014 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. Method for calculating steady-state flow-rate characteristics of systems
BS ISO 6358-2:2013 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. Alternative test methods
BS EN 12117:1998 Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships
BS EN ISO 17778:2015 Plastics piping systems. Fittings, valves and ancillaries. Determination of gaseous flow rate/pressure drop relationships
BS ISO 6358-1:2013+A1:2020 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. General rules and test methods for steady-state flow
BS ISO 18582-2:2018 Fluid power. Specification of reference dictionary - Definitions of classes and properties of pneumatics
19/30378151 DC BS ISO 6358-1 AMD1. Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. Part 1. General rules and test methods for steady-state flow
BS ISO 6358-1:2013 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. General rules and test methods for steady-state flow

IT-UNI, Flow Rate Regulations for Gas Propane

UNI 7040-1972

Lithuanian Standards Office , Flow Rate Regulations for Gas Propane

LST ISO 10780:2003 Stationary source emissions. Measurement of velocity and volume flowrate of gas streams in ducts (idt ISO 10780:1994)

European Committee for Standardization (CEN), Flow Rate Regulations for Gas Propane

EN ISO 12569:2012 Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method
EN ISO 1133-2:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
EN ISO 15351:2010 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999)

RU-GOST R, Flow Rate Regulations for Gas Propane

GOST 17.2.4.06-1990 Nature protection. Atmosphere. Methods for determination of velocity and flowrate of gas-and-dust streams from stationary sources of pollution
GOST R 8.925-2016 State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with Hydrogen, Nitrogen, Oxygen, Carbon Oxide, Carbon Dioxide, Methane, Propane, Hexane. Procedure of determining the metrological characteristics

ES-UNE, Flow Rate Regulations for Gas Propane

UNE-EN ISO 12569:2017 Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method (ISO 12569:2017) (Endorsed by Asociación Española de Normalización in October of 2017.)

ESDU - Engineering Sciences Data Unit, Flow Rate Regulations for Gas Propane

AERO 00.02.05 A-1981 Heat transfer under conditions of forced convection for the subsonic turbulent flow of gases in smooth straight ducts of constant cross section.
ESDU 74029 E-2007 Friction losses for fully-developed flow in straight pipes of constant cross section - subsonic compressible flow of gases.
ESDU 74029 D-1993 FRICTION LOSSES FOR FULLY-DEVELOPED FLOW IN STRAIGHT PIPES OF CONSTANT CROSS-SECTION - SUBSONIC COMPRESSIBLE FLOW OF GASES
AERO 00.03.26 A-1973 Wall and average gas temperatures for subsonic turbulent flow with heat transfer in ducts of constant circular cross section.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Flow Rate Regulations for Gas Propane

GB/T 12668.1-2002 Adjustable speed electrical power drive systems-Part 1: General requirements--Rating specifications for low voltage adjustable speed d.c power drive systems
GB/T 12668.4-2006 Adjustable speed electrical power drive systems.Part 4: General requirements. Rating specifications for a.c.power drive systems above 1000 V a.c.and not exceeding 35kV
GB/T 3886.1-2001 Semiconductor power convertors--Adjustable speed electric drive systems--General requirements Part 1: Rating specifications,particularly for d.c.motor drives
GB/T 12668.2-2002 Adjustable speed electrical power drive systems Part 2: General requirements--Rating specifications for low voltage adjustable frequency a.c. power drive systems

BELST, Flow Rate Regulations for Gas Propane

STB 17.08.05-02-2016 Environmental Protection and Nature Use. Air. Methods for determination of velocity and flowrate of gas emissions, released into the atmosphere from stationary sources of pollution

American Society for Testing and Materials (ASTM), Flow Rate Regulations for Gas Propane

ASTM D8221-18 Standard Practice for Determining the Calculated Methane Number (MNC) of Gaseous Fuels Used in Internal Combustion Engines
ASTM D8221-18a Standard Practice for Determining the Calculated Methane Number (MNC) of Gaseous Fuels Used in Internal Combustion Engines
ASTM D8221-23 Standard Practice for Determining the Calculated Methane Number (MNC) of Gaseous Fuels Used in Internal Combustion Engines
ASTM D8221-18ae1 Standard Practice for Determining the Calculated Methane Number (MNC) of Gaseous Fuels Used in Internal Combustion Engines

International Electrotechnical Commission (IEC), Flow Rate Regulations for Gas Propane

IEC 61800-4:2002 Adjustable speed electrical power drive systems - Part 4: General requirements; Rating specifications for a.c. power drive systems above 1000 V a.c., and not exceeding 35 kV
IEC 61136-1:1992 Semiconductor power convertors; adjustable speed electric drive systems; general requirements; part 1: rating specifications, particularly for d.c. motor drives

KR-KS, Flow Rate Regulations for Gas Propane

KS M ISO 1133-2-2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture

German Institute for Standardization, Flow Rate Regulations for Gas Propane

DIN EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011); German version EN ISO 1133-2:2011
DIN EN ISO 15351:2010-08 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999); German version EN ISO 15351:2010
DIN EN ISO 13477:2008-06 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008); German version EN ISO 13477:2008

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Flow Rate Regulations for Gas Propane

GB/T 14513.1-2017 Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 1: General rules and test methods for steady-state flow

Danish Standards Foundation, Flow Rate Regulations for Gas Propane

DS/EN ISO 13477:2008 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test)
DS/EN ISO 15351:2010 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method)

未注明发布机构, Flow Rate Regulations for Gas Propane

BS EN ISO 13477:2008(2012) Thermoplastics pipes for the conveyance of fluids — Determination ofresistance to rapid crack propagation (RCP) — Small - scale steady - state test (S4 test)