ZH
RU
ES

SEM Carbon

SEM Carbon, Total:351 items.

In the international standard classification, SEM Carbon involves: Optical equipment, Optics and optical measurements, Education, Analytical chemistry, Linear and angular measurements, Vocabularies, Surface treatment and coating, Non-ferrous metals, Physics. Chemistry, Air quality, Electronic display devices, Protection against crime, Thermodynamics and temperature measurements, Paints and varnishes, Testing of metals, Textile fibres, Optoelectronics. Laser equipment, Construction materials, Iron and steel products, Photography, Ceramics, Non-destructive testing, Mechanical testing, Fishing and fish breeding, Medical sciences and health care facilities in general, Semiconductor devices, Integrated circuits. Microelectronics, Medical equipment, Metrology and measurement in general, Cinematography, Paint ingredients, Products of the textile industry, Electrical engineering in general, Power transmission and distribution networks, Data storage devices, Organic chemicals, Document imaging applications, Microprocessor systems, Radiocommunications.

Japanese Industrial Standards Committee (JISC), SEM Carbon

JIS K 0132:1997 General rules for scanning electron microscopy
JIS K 0149-1:2008 Microbeam analysis -- Scanning electron microscopy -- Guidelines for calibrating image magnification
JIS K 3850-1:2006 Determination of airborne fibrous particles -- Part 1: Optical microscopy method and scanning electron microscopy method
JIS K 3850-1:2000 Measuring method for airborne fibrous particles -- Part 1: Optical microscopy method and scanning electron microscopy method
JIS R 1633:1998 Sample preparation method of fine ceramics and fine ceramic powders for scanning electron microscope observation
JIS K 0147-2:2017 Surface chemical analysis -- Vocabulary -- Part 2: Terms used in scanning-probe microscopy
JIS K 7542:1993 Dimensions of photographic film for electronic scanner use
JIS T 1507:1989 Electronic linear scanning ultrasonic diagnostic equipment
JIS B 7208:1972 16 mm motion picture scanning-beam illumination uniformity test films
JIS B 7207:1972 35 mm motion picture scanning-beam illumination uniformity test films, service type
JIS B 7206:1972 35 mm motion picture scanning-beam illumination uniformity test films, laboratory type

International Organization for Standardization (ISO), SEM Carbon

ISO/TS 21383:2021 Microbeam analysis - Scanning electron microscopy - Qualification of the scanning electron microscope for quantitative measurements
ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
ISO 22493:2008 Microbeam analysis - Scanning electron microscopy - Vocabulary
ISO 9220:1988 Metallic coatings; measurement of coating thickness; scanning electron microscope method
ISO 9220:2022 Metallic coatings — Measurement of coating thickness — Scanning electron microscope method
ISO 16700:2004 Microbeam analysis - Scanning electron microscopy - Guidelines for calibrating image magnification
ISO 16700:2016 Microbeam analysis - Scanning electron microscopy - Guidelines for calibrating image magnification
ISO/WD TR 23683:2023 Surface chemical analysis — scanning probe microscopy — Guideline for experimental quantification of carrier concentration in semiconductor devices by using electric scanning probe microscopy
ISO/TS 24597:2011 Microbeam analysis - Scanning electron microscopy - Methods of evaluating image sharpness
ISO 21466:2019 Microbeam analysis — Scanning electron microscopy — Method for evaluating critical dimensions by CD-SEM
ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
ISO 14966:2019 Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method
ISO 11039:2012 Surface chemical analysis - Scanning-probe microscopy - Measurement of drift rate
ISO 18115-2:2021 Surface chemical analysis — Vocabulary — Part 2: Terms used in scanning-probe microscopy
ISO 28600:2011 Surface chemical analysis - Data transfer format for scanning-probe microscopy
ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
ISO 27911:2011 Surface chemical analysis - Scanning-probe microscopy - Definition and calibration of the lateral resolution of a near-field optical microscope
ISO 16067-2:2004 Photography - Electronic scanners for photographic images - Spatial resolution measurements - Part 2: Film scanners
ISO 11775:2015 Surface chemical analysis - Scanning-probe microscopy - Determination of cantilever normal spring constants
ISO 14966:2002/cor 1:2007 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method; Technical Corrigendum 1
ISO 22493:2014 Microbeam analysis - Scanning electron microscopy - Vocabulary
ISO 11312:1993 Photography; film dimensions; film for electronic scanner use
ISO 16067-1:2003 Photography - Spatial resolution measurements of electronic scanners for photographic images - Part 1: Scanners for reflective media
ISO 18115-2:2010 Analyse chimique des surfaces — Vocabulaire — Partie 2: Termes utilisés en microscopie à sonde à balayage (Première édition)
ISO 11952:2019 Surface chemical analysis — Scanning-probe microscopy — Determination of geometric quantities using SPM: Calibration of measuring systems
ISO 11952:2014 Surface chemical analysis - Scanning-probe microscopy - Determination of geometric quantities using SPM: Calibration of measuring systems
ISO 18115-2:2013 Surface chemical analysis.Vocabulary.Part 2: Terms used in scanning-probe microscopy
ISO 21222:2020 Surface chemical analysis — Scanning probe microscopy — Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
ISO 16000-27:2014 Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
ISO/FDIS 17751-2 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends — Part 2: Scanning electron microscopy method
ISO 17751-2:2014 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends — Part 2: Scanning electron microscopy method
ISO 17751-2:2023 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends — Part 2: Scanning electron microscopy method
ISO 21550:2004 Photography - Electronic scanners for photographic images - Dynamic range measurements
ISO 17751-2:2016 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 2: Scanning electron microscopy method

National Metrological Technical Specifications of the People's Republic of China, SEM Carbon

JJF 1916-2021 Calibration Specification for Scanning Electronic Microscopes (SEM)
JJF 1351-2012 Calibration Specification for Scanning Probe Microscopes

Professional Standard - Machinery, SEM Carbon

JB/T 6842-1993 Test method of scanning electron microscope
JB/T 5384-1991 Scanning electron microscope - Technical specification
JB/T 7503-1994 Thickness of cross section of metal coatings Scanning electron microscope measuring method
JB/T 5478-1991 Manual scanning photoelectric direct-reading spectrometer

National Metrological Verification Regulations of the People's Republic of China, SEM Carbon

JJG(教委) 11-1992 Scanning Electron Microscope Calibration Regulations
JJG 550-1988 Verification Regulation of Scanning Electron Microscope

Professional Standard - Commodity Inspection, SEM Carbon

SN/T 4388-2015 Leather identification.Scanning electron microscopy and optical microscopy
SN/T 3009-2011 Identification of seawater corrosion on metallic surface by SEM
SN/T 3950-2014 Determination of oxidative onset temperature of hydrocarbons by differential.Scanning calorimetry
SN/T 2649.1-2010 Determination of asbestos in cosmetics for import and export.Part 1:X-ray diffraction and scan electron microscopy method

Korean Agency for Technology and Standards (KATS), SEM Carbon

KS M 0044-1999
KS I 0051-1999(2019) General rules for scanning electron microscopy
KS I 0051-1999 General rules for scanning electron microscopy
KS D ISO 22493-2012(2017) Microbeam analysis－Scanning electron microscopy－Vocabulary
KS D ISO 22493:2022 Microbeam analysis —Scanning electron microscopy — Vocabulary
KS D ISO 22493:2012 Microbeam analysis－Scanning electron microscopy－Vocabulary
KS D 2714-2016(2021) Scanning probe microscope－Method for lateral force microscope
KS D 2714-2016 Scanning probe microscope－Method for lateral force microscope
KS D ISO 9220:2009 Metallic coatings－Measurement of coating thickness－Scanning electron microscope method
KS D ISO 9220-2009(2022) Metallic coatings－Measurement of coating thickness－Scanning electron microscope method
KS D ISO 9220-2009(2017) Metallic coatings－Measurement of coating thickness－Scanning electron microscope method
KS D ISO 16700:2013 Microbeam analysis－Scanning electron microscopy－Guidelines for calibrating image magnification
KS D ISO 16700-2013(2018) Microbeam analysis－Scanning electron microscopy－Guidelines for calibrating image magnification
KS D 2714-2006 Scanning probe microscope-Method for lateral force microscope
KS D 2713-2016 Evaluation of spatial resolution of NSOM(Near-field Scanning Optical Microscope)
KS D 2713-2016(2021) Evaluation of spatial resolution of NSOM(Near-field Scanning Optical Microscope)
KS A ISO 16067-2-2005(2020) Photography－Electronic scanners for photographic images－Spatial resolution measurement－Part 2：Film scanners
KS A ISO 16067-2:2005 Photography-Electronic scanners for photographic images-Spatial resolution measurement-Part 2:Film scanners
KS A ISO 16067-1:2005 Photography-Spatial resolution measurements of electronic scanners for photographic image-Part 1:Scanners for reflective media
KS A ISO 16067-1-2005(2020) Photography－Spatial resolution measurements of electronic scanners for photographic image－Part 1：Scanners for reflective media
KS K ISO 17751-2:2019 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends — Part 2: Scanning electron microscopy method
KS X ISO/IEC 15780:2013 Information technology－8 mm wide magnetic tape cartridge－Helical scan recording－AIT－1 format
KS A ISO 21550:2005 Photography－Electronic scanners for photographic images－Dynamic range measurements
KS A ISO 21550-2005(2020) Photography－Electronic scanners for photographic images－Dynamic range measurements

Association Francaise de Normalisation, SEM Carbon

NF T25-111-4:1991 Carbon fibres- Texture and structure- Part 4: Fractography by scaning electron microscope
NF A91-108:1995 Metallic coatings. Measurement of coating thickness. Scanning electron microscope method.
NF A91-108*NF EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
NF EN ISO 9220:2022 Revêtements métalliques - Mesurage de l'épaisseur de revêtement - Méthode au microscope électronique à balayage
NF X21-005:2006 Microbeam analysis - Scanning electron microscopy - Guidelines for calibrating image magnification.
XP X21-015*XP ISO/TS 24597:2011 Microbeam analysis - Scanning electron microscopy - Methods of evaluating image sharpness
XP ISO/TS 24597:2011 Analyse par microfaisceaux - Microscopie électronique à balayage - Méthodes d'évaluation de la netteté d'image
FD T16-203:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
NF T16-403*NF ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
NF EN ISO 19749:2023 Nanotechnologies - Détermination de la distribution de taille et de forme des particules par microscopie électronique à balayage
NF X21-069-2:2010 Surface chemical analysis - Vocabulary - Part 2 : terms used in scanning-probe microscopy.
NF X21-010:2009 Microbeam analysis - Scanning electron microscopy - Vocabulary.
NF Z42-010-1:1992 Electronic imaging - Scanning of office documents - part1:Subcontracting of scanning - Guide to detailed technical instructions for bureaux
NF ISO 16000-27:2014 Air intérieur - Partie 27 : détermination de la poussière fibreuse déposée sur les surfaces par MEB (microscopie électronique à balayage) (méthode directe)
NF X43-404-27*NF ISO 16000-27:2014 Indoor air - Part 27 : determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
NF G07-142-2*NF EN ISO 17751-2:2016 Textiles - Quantitative analysis of cashmere, wool, other speciality animal fibres and their blends - Part 2 : scanning electron microscopy method

KR-KS, SEM Carbon

KS D ISO 22493-2022 Microbeam analysis —Scanning electron microscopy — Vocabulary
KS C ISO 19749-2023 Nanotechnologies — Measurements of particle size and shape distributions by scanning electron microscopy
KS K ISO 17751-2-2019 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends — Part 2: Scanning electron microscopy method

Professional Standard - Education, SEM Carbon

JY/T 0584-2020 General Rules for Analytical Methods of Scanning Electron Microscopy
JY/T 010-1996 General principles of analytical scanning electron microscopy
JY/T 0582-2020 General Rules for Scanning Probe Microscopy Analytical Methods
JY/T 0586-2020 General Rules for Analytical Methods of Laser Scanning Confocal Microscopy

Military Standard of the People's Republic of China-General Armament Department, SEM Carbon

GJB 2666-1996 Specification for scanning reflective beryllium mirrors
GJB 2666A-2018 Specification for scanning reflective beryllium mirrors
GJB 737.11-1993 Test methods for pyrotechnic chemicals Particle size determination Scanning electron microscopy
GJB 8288-2014 Verification regulation for ultra-high speed rotating mirror streak camera system

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, SEM Carbon

GB/T 33834-2017 Microbeam analysis—Scanning electron microscopy—Scanning electron microscope analysis of biological specimens
GB/T 36052-2018 Surface chemical analysis—Data transfer format for scanning probe microscopy
GB/T 33838-2017 Microbeam analysis—Scanning electron microscopy—Methods of evaluating image sharpness

British Standards Institution (BSI), SEM Carbon

18/30319114 DC BS ISO 20171. Microbeam analysis. Scanning electron microscopy. Tagged image file format for Scanning electron microscopy(TIFF/SEM)
BS EN ISO 9220:1989 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
BS ISO 16700:2004 Microbeam analysis - Scanning electron microscopy - Guidelines for calibrating image magnification
BS ISO 21466:2019 Microbeam analysis. Scanning electron microscopy. Method for evaluating critical dimensions by CDSEM
DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
21/30394409 DC BS ENISO 9220. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
BS ISO 19749:2021 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
BS EN ISO 9220:2022 Tracked Changes. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
BS ISO 18115-2:2013 Surface chemical analysis. Vocabulary. Terms used in scanning-probe microscopy
BS EN ISO 19749:2023 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
BS ISO 16700:2016 Tracked Changes. Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification
BS ISO 14966:2019 Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
18/30344520 DC BS ISO 21466. Microbeam analysis. Scanning electron microscopy. Method for evaluating critical dimensions by CD-SEM
BS ISO 28600:2011 Surface chemical analysis. Data transfer format for scanning-probe microscopy
BS DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
BS ISO 18115-2:2021 Surface chemical analysis. Vocabulary - Terms used in scanning-probe microscopy
BS ISO 16067-2:2004 Photography. Electronic scanners for photographic images. Spatial resolution measurements. Film scanners
18/30351679 DC BS ISO 19749. Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
BS ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
18/30375050 DC BS ISO 14966. Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
BS ISO 27911:2011 Surface chemical analysis. Scanning-probe microscopy. Definition and calibration of the lateral resolution of a near-field optical microscope
BS CECC 00013:1985 Harmonized system of quality assessment for electronic components: basic specification: scanning electron microscope inspection of semiconductor dice
BS ISO 16067-1:2003 Photography. Spatial resolution measurements for electronic scanners for photographic images. Scanners for reflective media
BS ISO 18115-2:2010 Surface chemical analysis - Vocabulary - Terms used in scanning-probe microscopy
BS ISO 11775:2015 Surface chemical analysis. Scanning-probe microscopy. Determination of cantilever normal spring constants
BS ISO 22493:2014 Microbeam analysis. Scanning electron microscopy. Vocabulary
BS EN ISO 17751-2:2023 Textiles. Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends - Scanning electron microscopy method
BS EN ISO 17751-2:2016 Textiles. Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends. Scanning Electron Microscopy method
BS ISO 11952:2019 Surface chemical analysis. Scanning-probe microscopy. Determination of geometric quantities using SPM: Calibration of measuring systems
12/30228339 DC BS ISO 16000-27. Indoor air. Part 27. Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
12/30265696 DC BS ISO 18115-2 AMD1. Surface chemical analysis. Vocabulary. Part 2. Terms used in scanning-probe microscopy
BS ISO 21222:2020 Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
BS ISO 21550:2004 Photography - Electronic scanners for photographic images - Dynamic range measurements
19/30351707 DC BS ISO 21222. Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
BS ISO 12653-1:2000 Electronic imaging - Test target for the black-and-white scanning of office documents - Characteristics
BS ISO 12653-1:2001 Electronic imaging. Test target for the black-and-white scanning of office documents. Characteristics
PD IEC/TS 61967-3:2014 Integrated circuits. Measurement of electromagnetic emissions. Measurement of radiated emissions. Surface scan method

American Society for Testing and Materials (ASTM), SEM Carbon

ASTM E766-98(2003) Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM E766-98 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM E2382-04(2020) Standard Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
ASTM E986-04 Standard Practice for Scanning Electron Microscope Beam Size Characterization
ASTM E986-04(2010) Standard Practice for Scanning Electron Microscope Beam Size Characterization
ASTM E2382-04 Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
ASTM E2382-04(2012) Standard Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
ASTM E986-97 Standard Practice for Scanning Electron Microscope Beam Size Characterization
ASTM E986-04(2017) Standard Practice for Scanning Electron Microscope Beam Size Characterization
ASTM E766-14 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM E766-98(2008)e1 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM C1723-16(2022) Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
ASTM C1723-10 Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
ASTM C1723-16 Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
ASTM E766-14(2019) Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM E766-14e1 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM B748-90(2006) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM B748-90(1997) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM E2142-08(2015) Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
ASTM E2142-08 Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
ASTM E2142-08(2023) Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
ASTM E1813-96e1 Standard Practice for Measuring and Reporting Probe Tip Shape in Scanning Probe Microscopy
ASTM E1813-96(2002) Standard Practice for Measuring and Reporting Probe Tip Shape in Scanning Probe Microscopy
ASTM E1813-96(2007) Standard Practice for Measuring and Reporting Probe Tip Shape in Scanning Probe Microscopy
ASTM B748-90(2010) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM E2809-13 Standard Guide for Using Scanning Electron Microscopy/X-Ray Spectrometry in Forensic Paint Examinations
ASTM B748-90(2021) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM E1588-95(2001) Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
ASTM E1588-08 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1588-10 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E2142-01 Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
ASTM E1588-95 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
ASTM B748-90(2016) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM B748-90(2001) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM E2090-00 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Clean Room Wipers Using Optical and Scanning Electron Microscopy
ASTM E2090-12 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
ASTM F1372-93(1999) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM E1588-20 Standard Practice for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
ASTM F1372-93(2020) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM D605-82(1996)e1 Standard Specification for Magnesium Silicate Pigment (Talc)
ASTM D6059-96(2011) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy
ASTM F1372-93(2005) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM E280-98(2004)e1 Standard Reference Radiographs for Heavy-Walled (4 &189; to 12-in. [114 to 305-mm]) Steel Castings
ASTM E1588-07e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-ray Spectrometry
ASTM E1588-07 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E280-21 Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings
ASTM E2809-22 Standard Guide for Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM/EDS) in Forensic Polymer Examinations
ASTM F1372-93(2012) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM E2603-15 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
ASTM F1438-93(1999) Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
ASTM F1438-93(2020) Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
ASTM E2009-08 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
ASTM E2009-99 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
ASTM E1858-23 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
ASTM F1438-93(2012) Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
ASTM E3309-21 Standard Guide for Reporting of Forensic Primer Gunshot Residue (pGSR) Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, SEM Carbon

GB/T 16594-1996 Micron grade lenght measurement by SEM
GB/T 31563-2015 Metallic coatings.Measurement of coating thickness.Scanning electron microscope method
GB/T 17722-1999 Gold-plated thickness measurement by SEM
GB/T 16594-2008 General rules for measurement of length in micron scale by SEM
GB/T 20307-2006 General rules for nanometer-scale length measurement by SEM
GB/T 17362-2008 Scanning electron microscope X-ray energy spectrum analysis method for gold products
GB/T 27788-2011 Microbeam analysis.Scanning electron microscopy.Guidelines for calibrating image magnification
GB/T 17362-1998 Nondestructive method of X-ray EDS analysis with SEM for gold jewelry
GB/T 17359-1998 General specification of X-ray EDS quantitative analysis for EPMA and SEM
GB/T 30834-2014 Standard test methods for rating and classifying inclusions in steel.Scanning electron microscope
GB/T 18295-2001 Analysis method of sandstone sample of petroleum and gas reservoir by scanning electron microscope
GB/T 36422-2018 Man-made fiber.Test method for micro morphology and diameter.Scanning electron microscope method
GB/T 30834-2022 Rating and classifying of inclusions in steel—Scanning electron microscope method
GB/T 29190-2012 Measurement methods of drift rate of scanning probe microscope
GB/T 25189-2010 Microbeam analysis.Determination method for quantitative analysis parameters of SEM-EDS
GB/T 14593-2008 Quantitative analysis method of cashmere,wool and their blends.Scanning electron microscope method
GB/T 42659-2023 Surface Chemical Analysis Scanning Probe Microscopy Determination of Geometric Quantities Using Scanning Probe Microscopy: Measurement System Calibration
GB/T 19267.6-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 6: Scanning electron microscopy
GB/T 28873-2012 General guide of environmental scanning electron microscopy for biological effectes on topography induced by nanoparticles
GB/T 17361-1998 Identification method of authigenic clay mineral in sedimentary rock by SEM & XEDS
GB/T 17361-2013 Microbeam analysis.Identification of authigenic clay mineral in sedimentary rock menthod by scanning electron microscope and energy dispersive spectrometer
GB/T 19267.6-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 6:Scanning electron microscope/X ray energy dispersive spectrometry
GB/T 23414-2009 Microbeam analysis.Scanning electron microscopy.Vocabulary
GB/T 32869-2016 Nanotechnologies.Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
GB/T 40905.2-2022 Textiles—Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends—Part 2: Scanning electron microscopy method
GB/Z 26083-2010 Determination for Copper(Ⅱ) octaakoxyl-substituted phthalocyanine on graphite surface(scanning tunneling microscope)

Group Standards of the People's Republic of China, SEM Carbon

T/CSTM 00795-2022 Materials experimental data-Requirements for scanning electron microscope images
T/QGCML 1940-2023
T/CSTM 00229-2020 Identification of graphene materials in coatings materials Scanning Electron Microscope-Energy Dispersive Spectrometer method
T/NLIA 004-2021 In-situ SEM tensile test method for additive manufactured aluminum alloy
T/CSTM 00346-2021 Automatic classification and statistics for the Inclusions in Steel —Energy dispersive spectrum method of scanning electron microscope
T/GAIA 017-2022 Determination of fluorine content in the surface coating of aluminum and aluminum alloys— Scanning electron microscope and energy dispersive spectrometer method
T/CEC 616-2022 Technical Specifications for Laser Scanning Flying Robots for Power Transmission Lines
T/SAS 0003-2018 Bismuth germanate scintillation crystals for positron emission tomography
T/CEC 448-2021 Technical regulations for unmanned aerial vehicle laser scanning operation of overhead transmission lines

Professional Standard - Petroleum, SEM Carbon

SY/T 5162-2014 Analytical method of rock sample by scanning electron microscope
SY/T 5162-1997 Analytical method of rock sample by scanning electron microscope
SY 5162-2014 Scanning Electron Microscopy Analysis Method for Rock Samples

Shanghai Provincial Standard of the People's Republic of China, SEM Carbon

DB31/T 297-2003 Calibration method of magnification of scanning electron microscope

Association of German Mechanical Engineers, SEM Carbon

VDI 3866 Blatt 5-2004 Determination of asbestos in technical products - Scanning electron microscopy method
VDI 3866 Blatt 5-2017 Determination of asbestos in technical products - Scanning electron microscopy method
VDI 3861 Blatt 2-2008 Stationary source emissions - Measurement of inorganic fibrous particles in exhaust gas - Scanning electron microscopy method
VDI/VDE 2656 Blatt 1-2008 Determination of geometrical quantities by using of Scanning Probe Microscopes - Calibration of measurement systems
VDI 3492-2004 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
VDI 3492-2013 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method

国家能源局, SEM Carbon

SY/T 5162-2021 Scanning electron microscopy analysis method of rock samples
NB/T 35109-2018 Three-dimensional laser scanning measurement procedures for hydropower projects

Guangdong Provincial Standard of the People's Republic of China, SEM Carbon

DB44/T 1527-2015 Microbeam Analysis Scanning Electron Microscope Image Clarity Evaluation Method
DB44/T 1215-2013 Characterization of Single-Walled Carbon Nanotubes Using Scanning Electron Microscopy and Energy Spectroscopy

Jiangsu Provincial Standard of the People's Republic of China, SEM Carbon

DB32/T 4546-2023 Technical specifications for automated inspection of diatom images using scanning electron microscopes
DB32/T 3459-2018 Scanning Electron Microscopy for Measuring the Micro-area Coverage of Graphene Films

Professional Standard - Judicatory, SEM Carbon

SF/T 0139-2023

国家市场监督管理总局、中国国家标准化管理委员会, SEM Carbon

GB/T 27788-2020 Microbeam analysis—Scanning electron microscopy—Guidelines for calibrating image magnification
GB/T 38783-2020 Method of coating thickness determination for precious metal composites by scanning electron microscope
GB/T 35099-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrometry—Morphology and element analysis of single fine particles in ambient air
GB/T 35097-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrosmetry—Determination of numberical concentration of inorganic fibrous particles in ambient air
GB/T 39867-2021 Bismuth germanate scintillation crystal for positron emission tomography

SE-SIS, SEM Carbon

SIS SS-ISO 9220:1989 Metallic coatings — Measurements of coating thickness — Scanning electron microscope method
SIS SS CECC 00013-1985 Basic specification: Scanning electron microscope inspection of semiconductor dice

European Committee for Standardization (CEN), SEM Carbon

EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022)
EN ISO 9220:1994 Metallic Coatings - Measurement of Coating Thickness - Scanning Electron Microscope Method (ISO 9220 : 1988)
EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021)
prEN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021)

RU-GOST R, SEM Carbon

GOST R 8.594-2009 State system for ensuring the uniformity of measurements. Scanning electron microscopes
GOST R 8.636-2007 State system for ensuring the uniformity of measurements. Scanning electron microscopes. Methods for calibration
GOST 8.594-2009 State system for ensuring the uniformity of measurements. Scanning electron microscopes. Method for verification
GOST R 8.631-2007 State system for ensuring the uniformity of measurements. Scanning electron microscopes. Methods for verification
GOST 8.593-2009 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for verification
GOST R 8.630-2007 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Methods for verification
GOST R 8.635-2007 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for calibration
GOST R 8.593-2009 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for verification
GOST ISO 16000-27-2017 Indoor air. Part 27. Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
GOST R 56109-2014 Medical electrical equipment. Positron emission tomographs together with X-ray equipment for computed tomography. Technical requirements for governmental purchases
GOST R ISO 27911-2015 State system for ensuring the uniformity of measurements. Surface chemical analysis. Scanning-probe microscopy. Definition and calibration of the lateral resolution of a near-field optical microscope

Danish Standards Foundation, SEM Carbon

DS/EN ISO 9220:1995 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
DS/ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
DS/ISO 19749:2021 Nanotechnologies – Measurements of particle size and shape distributions by scanning electron microscopy

German Institute for Standardization, SEM Carbon

DIN EN ISO 9220:2022-05 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022); German version EN ISO 9220:2022
DIN EN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021); German and English version prEN ISO 9220:2021
DIN EN ISO 19749:2023-07 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021); German version EN ISO 19749:2023
DIN EN ISO 9220:1995 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988); German version EN ISO 9220:1994
DIN SPEC 52407:2015-03 Nanotechnologies - Methods for preparation and assessment for particle measurements with atomic force microscopy (AFM) and transmission scanning electron microscopy (TSEM)
DIN ISO 16000-27:2014-11 Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method) (ISO 16000-27:2014)
DIN EN ISO 17751-2:2016-11 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 2: Scanning Electron Microscopy method (ISO 17751-2:2016); German version EN ISO 17751-2:2016 / Note: To be replaced by DIN EN ISO 17751-2 (2022-09).
DIN EN ISO 17751-2:2022-09 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends - Part 2: Scanning electron microscopy method (ISO/DIS 17751-2:2022); German and English version prEN ISO 17751-2:2022 / Note: Date of issue 2022-08-19*I...
DIN ISO 16000-27:2014 Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method) (ISO 16000-27:2014)

ES-UNE, SEM Carbon

UNE-EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022)
UNE-EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021) (Endorsed by Asociación Española de Normalización in May of 2023.)
UNE-EN ISO 17751-2:2016 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 2: Scanning Electron Microscopy method (ISO 17751-2:2016)

工业和信息化部, SEM Carbon

YS/T 1491-2021 Method for determination of sphericity of nickel-based high-temperature alloy powder by scanning electron microscopy
SJ/T 11759-2020 Measurement of Photovoltaic Cell Electrode Grid Line Aspect Ratio Laser Scanning Confocal Microscopy

Professional Standard - Public Safety Standards, SEM Carbon

GA/T 1939-2021 Forensic Science Current Spot Examination Scanning Electron Microscopy/X-ray Spectroscopy
GA/T 1938-2021 Forensic Science Metal Inspection Scanning Electron Microscopy/X-Ray Spectroscopy
GA/T 1937-2021 Forensic Science Rubber Inspection Scanning Electron Microscopy/X-ray Spectroscopy
GA/T 1418-2017 Elemental Composition Examination of Forensic Science Glass Evidence Scanning Electron Microscopy/Energy Spectroscopy
GA/T 1522-2018 Forensic Science Shooting Residue Inspection Scanning Electron Microscopy/X-Ray Spectroscopy
GA/T 1521-2018 Forensic Science Plastics Elemental Composition Examination Scanning Electron Microscopy/X-ray Spectroscopy
GA/T 1519-2018 Forensic Science Toner Elemental Composition Inspection Scanning Electron Microscopy/X-ray Spectroscopy
GA/T 909-2010 Collecting and packaging method for trace evidence-Gunshot residue(SEM/EDS examination)
GA/T 1520-2018 Forensic science black powder, pyrotechnic powder element composition inspection scanning electron microscope/X-ray energy spectrometry
GA/T 823.3-2018 Methods of Examination of Paint Evidence in Forensic Science Part 3: Scanning Electron Microscopy/X-ray Spectroscopy

GOSTR, SEM Carbon

PNST 508-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by scanning electron microscopy and energy dispersive X-ray spectrometry

BELST, SEM Carbon

STB 2210-2011 Nano-sized carbon and non-carbon materials and composites based on them. Method for determining parameters using scan electron microscopy measurements
STB 2209-2011 Nano-sized carbon and non-carbon materials and composites based on them. The technique for determining elemental composition using scan electron microscopy measurements

Fujian Provincial Standard of the People's Republic of China, SEM Carbon

DB35/T 110-2000 Electron probe and scanning electron microscope X-ray energy spectrum analysis method for paint physical evidence detection

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, SEM Carbon

GJB 5891.6-2006 Test method of loading material for initiating explosive device Part 6: Measurement of grain size Scanning electron microscopy

AENOR, SEM Carbon

UNE-EN ISO 9220:1996 METALLIC COATINGS. MEASUREMENT OF COATING THICKNESS. SCANNING ELECTRON MICROSCOPE METHOD. (ISO 9220:1988).

Lithuanian Standards Office , SEM Carbon

LST EN ISO 9220:2001 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988)

AT-ON, SEM Carbon

OENORM EN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021)

IN-BIS, SEM Carbon

IS 9782-1981

Society of Motion Picture and Television Engineers (SMPTE), SEM Carbon

SMPTE 293M-2003 Television - 720 X 483 Active Line at 59.94-Hz Progressive Scan Production - Digital Representation
SMPTE 294M-2001 Television 720 X 483 Active Line at 59.94-Hz Progressive Scan Production - Bit-Serial Interfaces
SMPTE EG 25-2003 Telecine Scanning for Film Transfer to Television
SMPTE 96M-2004 Television - 35- and 16-mm Motion-Picture Film - Scanned Image Area
SMPTE 96M-1999 Television - 35- and 16-mm Motion-Picture Film - Scanned Image Area
SMPTE ST 96M-2004 Television - 35- and 16-mm Motion-Picture Film - Scanned Image Area
SMPTE 16M-1998 Television Analog Recording - 1-in Type B Helical Scan - Records
SMPTE ST 16M-1998 Television Analog Recording - 1-in Type B Helical Scan - Records

BE-NBN, SEM Carbon

NBN EN ISO 9220:1995 Metallic coatings - Measurement of coating thickness - Scanning électron microscope method (ISO 9220:1988)

Professional Standard - Chemical Industry, SEM Carbon

HG/T 3640-1999 Photography.Film dimension.Film for electronic scanner use

Shandong Provincial Standard of the People's Republic of China, SEM Carbon

DB37/T 420.2-2004 Diagnosis protocol for scorpion finger disease in mariculture fish part 2: Scanning electron microscopy diagnostic method

American National Standards Institute （ANSI), SEM Carbon

ANSI/ASTM D6059:2001 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy

未注明发布机构, SEM Carbon

BS CECC 13:1985(1999) Harmonized system of quality assessment for electronic components : Basic specification : Scanning electron microscope inspection of semiconductor dice
JIS K 0182:2023 Surface chemical analysis -- Scanning-probe microscopy -- Determination of cantilever normal spring constants

Professional Standard - Aviation, SEM Carbon

HB 20094.4-2012 Test method for determination of wear metals in operating liquid for aviation.Part 4: Scanning electron microscopy and energy dispersive spectrometry

未注明发布机构, SEM Carbon

BS CECC 13:1985(1999) Harmonized system of quality assessment for electronic components : Basic specification : Scanning electron microscope inspection of semiconductor dice
JIS K 0182:2023 Surface chemical analysis -- Scanning-probe microscopy -- Determination of cantilever normal spring constants

Professional Standard - Nuclear Industry, SEM Carbon

EJ/T 20150.23-2018 PWR Rod-Radiation Fuel Assembly Post-Illumination Part 23: SEM Analysis of Fuel Cladding Tubes

Taiwan Provincial Standard of the People's Republic of China, SEM Carbon

CNS 14197-1998 Electric linear scanining ultrasonic diagnostic equipment

NEMA - National Electrical Manufacturers Association, SEM Carbon

NEMA NU 2-2012 Performance Measurements of Positron Emission Tomographs
NEMA NU 2-2018 Performance Measurements of Positron Emission Tomographs (PET)

International Telecommunication Union (ITU), SEM Carbon

ITU-R SM.1839 SPANISH-2007 Test procedure for measuring the scanning speed of radio monitoring receivers Procedimiento de prueba para medir la velocidad de exploraci髇 de los receptores de comprobaci髇 t閏nica radioel閏trica
ITU-R BR.1441 FRENCH-2000 COMPROMISE SCANNED AREA DIMENSIONS FOR TELEVISION FROM 35 mm WIDE- SCREEN FILMS
ITU-R BR.1441 SPANISH-2000 COMPROMISE SCANNED AREA DIMENSIONS FOR TELEVISION FROM 35 mm WIDE- SCREEN FILMS
ITU-R BR.1374-1-2001 Scanned Area Dimensions from 16 MM and 35 MM Cinematographic Film Used in Television
ITU-R BT.1358-1-2007 Studio parameters of 625 and 525 line progressive television systems
ITU-R SM.1839-1 FRENCH-2011 Test procedure for measuring the scanning speed of radio monitoring receivers
ITU-R SM.1839-1-2011 Test procedure for measuring the scanning speed of radio monitoring receivers
ITU-R SM.1839-1 SPANISH-2011 Test procedure for measuring the scanning speed of radio monitoring receivers
ITU-R SM.1839-2007 Test procedure for measuring the scanning speed of radio monitoring receivers
ITU-R SM.1839 FRENCH-2007 Test procedure for measuring the scanning speed of radio monitoring receivers Proc閐ure d抏ssai pour mesurer la vitesse d抏xploration des r閏epteurs de contr鬺e des 閙issions
ITU-R SM.1839-2011 Test procedure for measuring the scanning speed of radio monitoring receivers

Professional Standard - Electricity, SEM Carbon

DL/T 1346-2014 Operating code of helicopter laser scanning for transmission line
DL/T 1346-2021 Technical regulations for helicopter laser scanning operation of overhead transmission lines

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, SEM Carbon

ITU-R BT.1358-1998 Studio Parameters of 625 and 525 Line Progressive Scan Television Systems

Institute of Electrical and Electronics Engineers (IEEE), SEM Carbon

SMPTE EG 25:2003 EG 25:2003 - SMPTE Engineering Guideline - Telecine Scanning for Film Transfer to Television
SMPTE ST 295:1997 ST 295:1997 - SMPTE Standard - For Television — 1920 × 1080 50 Hz — Scanning and Interfaces

Professional Standard - Military and Civilian Products, SEM Carbon

WJ 2299-1995 Inductively Coupled Plasma Sequential Scanning Spectrometer Verification Regulations

Professional Standard - Energy, SEM Carbon

DL/T 2333-2021 Technical regulations for ground three-dimensional laser scanning measurement of power transmission and transformation projects