ZH
RU
ES

plastic voc

plastic voc, Total:500 items.

In the international standard classification, plastic voc involves: Paints and varnishes, Plastics, Wastes, Road vehicle systems, Welding, brazing and soldering, Conducting materials, Adhesives, Aircraft and space vehicles in general, Protection against dangerous goods, Rubber and plastics products, Pipeline components and pipelines, Reinforced plastics, Air quality, Valves, Protection against fire, Farming and forestry, RUBBER AND PLASTICS INDUSTRIES, Bottles. Pots. Jars, Chipless working equipment, Company organization and management, Fasteners for aerospace construction.

German Institute for Standardization, plastic voc

DIN EN ISO 17895 Berichtigung 1:2007 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005); German version EN ISO 17895:2005, Corrigenda to DIN EN ISO 17895:2005-06
DIN EN 15347:2008-02 Plastics - Recycled Plastics - Characterisation of plastics wastes; German version EN 15347:2007 / Note: To be replaced by DIN EN 15347 (2022-04).
DIN EN 15347:2008 Plastics - Recycled Plastics - Characterisation of plastics wastes; English version of DIN EN 15347:2008-02
DIN EN 15347:2022 Plastics - Recycled plastics - Characterisation of sorted plastics wastes; German and English version prEN 15347:2022
DIN EN 15347:2022-04 Plastics - Recycled plastics - Characterisation of sorted plastics wastes; German and English version prEN 15347:2022 / Note: Date of issue 2022-02-25*Intended as replacement for DIN EN 15347 (2008-02).
DIN EN ISO 17895:2005 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005); German version EN ISO 17895:2005
DIN 35230:2016-09 Plastics - Welding of thermoplastics - Specification of welding procedures; German version CEN/TS 16892:2015
DIN EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981); German version EN ISO 3915:1999
DIN EN ISO 3915:2022-05 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022); German version EN ISO 3915:2022
DIN EN 15345:2008 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates; English version of DIN EN 15345:2008-02
DIN 53733:1976 Testing of Plastics; Size Reduction of Plastic Products for Test Purposes
DIN 53733:2021 Testing of plastics - Size reduction of plastic products for test purposes
DIN 53733:2015 Testing of plastics - Size reduction of plastic products for test purposes
DIN ISO 171:2000 Plastics - Determination of bulk factor of moulding materials (ISO 171:1980)
DIN CEN/TS 16010:2021-04 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates; German version CEN/TS 16010:2020
DIN EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001); German version EN ISO 294-4:2003
DIN EN ISO 3671:1998-10 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976); German version EN ISO 3671:1998 / Note: To be replaced by DIN EN ISO 3671 (2023-01).
DIN EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004
DIN EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004); English version of DIN EN ISO 293
DIN EN ISO 16135 Berichtigung 1:2008 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006); German version EN ISO 16135:2006, Corrigenda to DIN EN ISO 16135:2006-06
DIN EN 15348:2008 Plastics - Recycled Plastics - Characterisation of poly(ethylene terephthalate) (PET) recyclates; English version of DIN EN 15348:2008-02
DIN EN ISO 15252-3:2000-08 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 15252-3:1999); German version EN ISO 15252-3:1999
DIN EN ISO 14526-3:2000-08 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14526-3:1999); German version EN ISO 14526-3:1999
DIN EN ISO 16138 Berichtigung 1:2008 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006); German version EN ISO 16138:2006, Corrigenda to DIN EN ISO 16138:2006-06
DIN EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002); German version EN ISO 294-3:2003
DIN 53736:1973 Testing of plastics; determination of the melt temperature of semicristalline plastics
DIN EN ISO 10210:2018-02 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German version EN ISO 10210:2017
DIN EN ISO 177:1999 Plastics - Determination of migration of plasticizers (ISO 177:1988); German version EN ISO 177:1999
DIN EN ISO 177:2017-05 Plastics - Determination of migration of plasticizers (ISO 177:2016); German version EN ISO 177:2017
DIN EN ISO 13968:2009 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008); English version of DIN EN ISO 13968:2009-01
DIN EN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021); German and English version prEN ISO 3915:2021
DIN EN 15344:2008 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates; English version of DIN EN 15344:2008-02
DIN EN ISO 3671:1998 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976); German version EN ISO 3671:1998
DIN EN 15345:2008-02 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates; German version EN 15345:2007
DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN EN 16063:2012-02 Packaging - Rigid plastic containers - Nomenclature of plastic finishes; German version EN 16063:2011
DIN EN 15344:2021-07 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates; German version EN 15344:2021
DIN EN 15344:2020 Plastics - Recycled plastics - Characterisation of Polyethylene (PE) recyclates; German and English version prEN 15344:2020
DIN CEN/TS 17627:2021-07 Plastics - Recycled plastics - Determination of solid contaminants content; German version CEN/TS 17627:2021
DIN CEN/TS 16010:2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates; German version CEN/TS 16010:2020
DIN CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates; German version CEN/TS 16010:2013
DIN EN 15343:2008 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content; English version of DIN EN 15343:2008-02
DIN EN ISO 14530-3:2000-08 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14530-3:1999); German version EN ISO 14530-3:1999
DIN 53498:1967 Testing of Plastics; Heat Storage of Compression Mouldings Made of Thermosetting Compression Moulding Materials
DIN 53733:2021-04 Testing of plastics - Size reduction of plastic products for test purposes
DIN EN 15534-5:2014-04 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German version EN 15534-5:2014 / Note: To be re...
DIN EN 15534-1:2018-02 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products; German version EN 15534-1:2014+A1:...
DIN EN ISO 3671:2023-01 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO/DIS 3671:2022); German and English version prEN ISO 3671:2022 / Note: Date of issue 2022-12-02*Intended as replacement for DIN EN ISO 3671 (1998-10).

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, plastic voc

GB/T 35466-2017 Determination of the emission of volatile organic compounds form wood-plastic composite for construction
GB/T 37884-2019 Determination of volatile organic compound（VOC）emission from coating materials
GB/T 9352-2008 Plastic.Compression moulding of test specimens of thermoplastic materials
GB/T 5471-2008 Plastic.Compression moulding of test specimens of thermosetting materials
GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage
GB/T 17037.3-2003 Plastics--Injection moulding of test specimens of thermoplastic materials--Part 3: Small plates
GB/T 22236-2008 Testing of plastics.Size reduction of plastic products for test purposes
GB/T 8324-2008 Plastics.Determination of bulk factor of moulding materials
GB 1404.3-2008 Plastics-Phenolic powder moulding compounds-Part 3:Requirements for selectes moulding compounds
GB1404.3-2008 Plastics-Phenolic powder moulding compounds-Part 3:Requirements for selectes moulding compounds
GB 1404.3-2008 Plastics-Phenolic powder moulding compounds-Part 3:Requirements for selectes moulding compounds
GB/T 9352-1988 Plastics--Compression moulding test specimens of thermoplastic materials
GB/T 1040.2-2006 Plastics. Determination of tensile properties. Part 2: Test conditions for moulding and extrusion plastics
GB/T 1040.2-2022 Plastics—Determination of tensile properties—Part 2: Test conditions for moulding and extrusion plastics
GB/T 8806-2008 Plastics piping systems.Plastics components.Determination of dimensions
GB/T 30102-2013 Plastics.Guidelines for the recovery and recycling of plastics waste

Korean Agency for Technology and Standards (KATS), plastic voc

KS M ISO 17895:2011 Paints and varnishes-Determination of the volatile organic compound content of low-VOC emulsion paints(in-can VOC)
KS M ISO 17895:2016 Paints and varnishes－Determination of the volatile organic compound content of low-VOC emulsion paints(in-can VOC)
KS M ISO 306:2012 Plastics-Thermoplastic materials-Determination of Vicat softening temperature(VST)
KS M ISO 306:2015 Plastics－Thermoplastic materials－Determination of Vicat softening temperature(VST)
KS M ISO 3915:2002 Plastics-Measurement of resistivity of conductive plastics
KS M ISO 3915-2002(2017) Plastics－Measurement of resistivity of conductive plastics
KS M ISO 3915-2002(2022) Plastics－Measurement of resistivity of conductive plastics
KS M ISO 1622-2:2008 Plastics－Polystyrene(PS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M 3071-2004(2019) Plastics􀫥Determination of thermal stability of thermoplastics􀫥Oven method
KS M ISO 527-2-2013(2018) Plastics ㅡ Determination of tensile properties ㅡ Part 2: Test conditions for moulding and extrusion plastics
KS M ISO 16869:2011 Plastics--Assessment of the effectiveness of fungistatic compounds in plastics formulations
KS M ISO 16869:2014 Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations
KS I 3546-2012(2017) Reduction performance test of VOCs (volatile organic compound) and aldehyde by contamination reduction building material - the solid phase building material
KS M ISO 295:2010 Plastics-Compression moulding of test specimens of thermosetting materials
KS M ISO 11469:2008 Plastics－Generic identification and marking of plastics products
KS M ISO 295-2010(2020) Plastics－Compression moulding of test specimens of thermosetting materials
KS M ISO 11469:2018 Plastics — Generic identification and marking of plastics products
KS M ISO 14526-3-2006(2016) Plastics－Phenolic powder moulding compounds(PF－PMCs)－Part 3：Requirements for selected moulding compounds
KS M ISO 177:2003 Plastics-Determination of migration of plasticizers
KS M ISO 177:2018 Plastics — Determination of migration of plasticizers
KS C 2006-1998 Testing method for ball pressure of thermoplastics
KS M ISO 13968:2020 Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility
KS M ISO 306-2015(2020) Plastics－Thermoplastic materials－Determination of Vicat softening temperature(VST)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., plastic voc

ASHRAE AT-01-13-2001 Modeling and Measurement of VOC Emissions from Building Materials
ASHRAE KC-03-11-4-2003 A New Mass Transfer Based Model of VOC Emissions from Building Materials
ASHRAE 4356-2000 Measurements of VOC Adsorption/Desorption Characteristics of Typical Interior Building Materials (The Full Text of This Paper Can Be Found in the International Journal of Heating@ Ventilating@ Air-Conditioning and Refrigerating Research@ Volume 5@ Number
ASHRAE AT-01-13-2-2001 "Effects of Airflow on VOC Emissions from ""Wet"" Coating Materials: Experimental Measurements and Numerical Simulation"
ASHRAE 4508-2002 A Critical Review on Studies of Volatile Organic Compound (VOC) Corption by Building Materials (RP-1097)
ASHRAE 4578-2002 Effects of Environmental Conditions on the VOC Sorption by Building Materials - Part I: Experimental Results (RP-1097)
ASHRAE 4616-2003 Effects of Environmental Conditions on the Sorption of VOCs on Building Materials - Part II: Model Evaluation (RP-1097)

International Organization for Standardization (ISO), plastic voc

ISO 17895:2005 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC)
ISO 294:1975 Plastics; Injection moulding test specimens of thermoplastic materials
ISO 294:1995 Plastics - Injection moulding of test specimens of thermoplastic materials
ISO 293:2004 Plastics - Compression moulding of test specimens of thermoplastic materials
ISO 293:1986 Plastics; Compression moulding test specimens of thermoplastic materials
ISO 293:2023 Plastics — Compression moulding of test specimens of thermoplastic materials
ISO/FDIS 3671:2004 Plastics — Aminoplastic moulding materials — Determination of volatile matter
ISO 3671:2023 Plastics — Aminoplastic moulding materials — Determination of volatile matter
ISO 293:1974 Plastics — Compression moulding test specimens of thermoplastic materials
ISO 1133:1981 Plastics — Determination of the melt flow rate of thermoplastics
ISO 306:1987 Plastics; Thermoplastic materials; Determination of Vicat softening temperature
ISO 306:1974 Plastics — Determination of the Vicat softening temperature of thermoplastics
ISO 3915:1981 Plastics; measurement of resistivity of conductive plastics
ISO 3915:2022 Plastics — Measurement of resistivity of conductive plastics
ISO 294-4:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
ISO 11890-2:2006 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method
ISO 11890-2:2013 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method
ISO 22196:2007 Plastics - Measurement of antibacterial activity on plastics surfaces
ISO 1184:1983 Plastics; Determination of tensile properties of films
ISO 171:1980 Plastics; Determination of bulk factor of moulding materials
ISO 489:1983 Plastics; Determination of the refractive index of transparent plastics
ISO 171:2022 Plastics — Determination of bulk factor of moulding materials
ISO/DIS 3671 Plastics — Aminoplastic moulding materials — Determination of volatile matter
ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
ISO 11469:2000 Plastics - Generic identification and marking of plastics products
ISO 11469:2016 Plastics - Generic identification and marking of plastics products
ISO 11469:1993 Plastics; generic identification and marking of plastic products
ISO 2577:1984 Plastics; Thermosetting moulding materials; Determination of shrinkage
ISO 295:1974 Plastics; Compression moulding test specimens of thermosetting materials
ISO 295:1991 Plastics; compression moulding of test specimens of thermosetting materials
ISO 23949:2023 Plastics — Application of spread of flame test to plastic pipes
ISO/R 1183:1970 Plastics — Methods for determining the density and relative density (specific gravity) of plastics excluding cellular plastics
ISO 16790:2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
ISO 16790:2021 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
ISO 177:1976 Plastics — Determination of migration of plasticizers
ISO 2577:2007 Plastics - Thermosetting moulding materials - Determination of shrinkage
ISO 294-3:2002 Plastics - Injection moulding of test specimens of thermoplastics materials - Part 3: Small plates
ISO 177:2016 Plastics - Determination of migration of plasticizers
ISO 177:1988 Plastics; determination of migration of plasticizers
ISO 5774:1980 Plastics hoses; Textile-reinforced thermoplastics type for compressed air; Specification
ISO 3949:1980 Plastics hoses and hose assemblies; Thermoplastics, textile-reinforced, hydraulic type
ISO 7808:1992 Plastics; thermosetting moulding materials; determination of transfer flow
ISO 3671:1976 Plastics; Aminoplastic moulding materials; Determination of volatile matter
ISO 306:1994 Plastics - Thermoplastic materials - Determination of Vicat Softening Temperature (VST)
ISO/R 1326:1970 Plastics; Determination of flammability and burning rate of plastics in the form of film

Association Francaise de Normalisation, plastic voc

NF T30-300*NF EN ISO 17895:2006 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC)
NF EN 15347:2008 Plastiques - Plastiques recyclés - Caractérisation des déchets de plastiques
NF T50-806*NF EN 15347:2008 Plastics - Recycled Plastics - Characterisation of plastics wastes.
NF T58-003*NF EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
NF T51-080:1984 PLASTICS. DETERMINATION OF THE RESISTIVITY OF CONDUCTIVE PLASTICS.
NF T51-080*NF EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics
NF EN ISO 3915:2022 Plastiques - Mesurage de la résistivité des plastiques conducteurs
NF T50-803:2008 Plastics - Recycled plastics - Characterisation of Polyethylene (PE) recyclates.
NF T50-803*NF EN 15344:2021 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
NF T50-804*NF EN 15345:2008 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
XP CEN/TS 16010:2013 Plastiques - Plastiques recyclés - Procédures d'échantillonnage pour l'essai des déchets de plastiques et des recyclats
NF T30-407-2:2013 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: gas-chromatographic method
NF T30-407-1*NF EN ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1 : difference method
NF T51-800:2015 Plastiques - Spécifications pour les plastiques aptes au compostage domestique
XP T50-809*XP CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
NF EN ISO 14526-3:2000 Plastiques - Poudres à mouler phénoliques (PF-PMC) - Partie 3 : exigences relatives à certaines poudres à mouler
NF T58-005*NF EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
NF T50-060*NF EN ISO 11469:2016 Plastics - Generic identification and marking of plastics products
NF EN ISO 11469:2016 Plastiques - Identification générique et marquage des produits en matière plastique
NF T51-566:2006 Plastics - Determination of drawing characteristics of thermoplastics in the molten state.
NF T53-035:1981 Plastics. Amorphous thermoplastic moulding materials. Determination of post-shrinkage of test specimens.
NF EN ISO 3671:1998 Matières plastiques - Matières à mouler aminoplastes - Détermination des matières volatiles.
NF T51-080:1999 Plastics. Measurement of resistivity of conductive plastics.
NF T51-018:1981 Plastics. Modulus of longitudinal elasticity of rigid plastics.
NF EN 16063:2012 Emballage - Récipients en plastique rigide - Nomenclature des bagues en plastique
NF EN 13206+A1:2020 Plastiques - Films de couverture thermoplastiques pour utilisation en agriculture et horticulture
NF EN ISO 15252-3:2000 Plastiques - Poudres à mouler à base d'époxydes (EP-PMC) - Partie 3 : exigences relatives à certaines poudres à mouler
NF EN ISO 14530-3:2000 Plastiques - Poudres à mouler à base de polyester non saturé (UP-PMC) - Partie 3 : exigences relatives à certaines poudres à mouler
NF EN ISO 14529-3:2000 Plastiques - Poudres à mouler à base de mélamine/phénol (MP-PMC) - Partie 3 : exigences relatives à certaines poudres à mouler
NF T51-809*NF EN ISO 10210:2017 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
NF EN ISO 10210:2017 Plastiques - Méthodes de préparation des échantillons pour les essais de biodégradation des matériaux plastiques
NF T51-025:1963 PLASTICS. DETERMINATION OF THE MIGRATION OF PLASTICIZERS.
NF T51-025*NF EN ISO 177:2017 Plastics - Determination of migration of plasticizers
NF EN ISO 177:2017 Plastiques - Détermination de la migration des plastifiants
NF EN 1704:1997 Systèmes de canalisations en plastique - Robinets thermoplastiques - Méthode d'essai pour la vérification d'un robinet après des cycles thermiques sous flexion.
NF T51-021*NF EN ISO 306:2014 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
NF EN 15344:2021 Plastiques - Plastiques recyclés - Caractérisation des recyclats de polyéthylène (PE)
NF EN 15345:2008 Plastiques - Plastiques recyclés - Caractérisation des recyclats de polypropylène (PP)
NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
NF T50-802*NF EN 15343:2008 Plastics - Recycled plastics - Plastics recycling traceability and assessment of conformity and recycled content.

British Standards Institution (BSI), plastic voc

BS EN ISO 17895:2005 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC)
BS EN 15347:2008 Plastics. Recycled Plastics. Characterization of plastics waste
BS EN 15347:2007 Plastics - Recycled Plastics - Characterization of plastics waste
BS EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials
BS EN ISO 11890-1:2008 Paints and varnishes. Determination of volatile organic compound (VOC) content. Difference method
BS EN ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1:Difference method (ISO 11890-1:2007)
BS EN ISO 3671:1978 Plastics - Aminoplastic moulding materials - Determination of volatile matter
22/30448009 DC BS EN 15347. Plastics. Recycled plastics. Characterisation of sorted plastics wastes
BS PD CEN/TS 16892:2015 Plastics. Welding of thermoplastics. Specification of welding procedures
BS EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics
BS EN ISO 7808:1993 Plastics. Thermosetting moulding materials. Determination of transfer flow
BS EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Small plates
BS EN ISO 3671:1999 Plastics. Aminoplastic moulding materials. Determination of volatile matter
BS EN ISO 3671:2023 Plastics. Aminoplastic moulding materials. Determination of volatile matter
BS EN 13677-1:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Designation
BS PD CEN/TS 16010:2020 Plastics. Recycled plastics. Sampling procedures for testing plastics waste and recyclates
BS EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
BS ISO 16790:2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
BS EN ISO 177:2000 Plastics - Determination of migration of plasticizers
BS EN ISO 177:1990 Plastics - Determination of migration of plasticizers
BS EN 16063:2011 Packaging. Rigid plastic containers. Nomenclature of plastic finishes
BS EN ISO 3126:2005 Plastics piping systems. Plastics components. Determination of dimensions
BS EN 638:1995 Plastics piping and ducting systems - Thermoplastics pipes - Determination of tensile properties
BS EN 13677-3:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Specific requirements
BS EN ISO 15526-2:2004 Plastics - Polyketone (PK) moulding and extrusion materials - Preparation of test specimens and determination of properties
23/30464063 DC BS ENISO 3671 Plastics. Aminoplastic moulding materials. Determination of volatile matter
BS EN ISO 10210:2017 Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials
BS EN 13067:2012 Plastics welding personnel. Qualification testing of welders. Thermoplastics welded assemblies
BS EN 13067:2020 Plastics welding personnel. Qualification testing of welders. Thermoplastics welded assemblies
BS EN 13067:2003 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
BS EN ISO 11469:2000 Plastics - Generic identification and marking of plastics products
BS EN ISO 3915:2022 Tracked Changes. Plastics. Measurement of resistivity of conductive plastics
21/30427395 DC BS EN ISO 3915. Plastics. Measurement of resistivity of conductive plastics
BS EN 15343:2007 Plastics - Recycled plastics - Plastics recycling traceability and assessment of conformity and recycled content
BS EN 15342:2007 Plastics - Recycled plastics - Characterization of polystyrene (PS) recyclates
BS EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Determination of moulding shrinkage
BS EN ISO 294-5:2013 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy

European Committee for Standardization (CEN), plastic voc

EN ISO 17895:2005 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC)
EN 15347:2007 Plastics - Recycled Plastics - Characterisation of plastics wastes
EN ISO 306:2022 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
EN ISO 306:1996 Plastics - Thermoplastic Materials - Determination of Vicat Softening Temperature (VST) ISO 306:1994
EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
PD CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)
EN ISO 3915:1999 Plastics - Measurement of Resistivity of Conductive Plastics
EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
EN ISO 11890-2:2020 Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2020)
EN ISO 11890-2:2013 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method
PD CEN/TS 16010:2020 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
EN ISO 293:2003 Plastics - Compression moulding test specimens of thermoplastic materials ISO 293: 1986
EN ISO 295:1998 Plastics - Compression Moulding of Test Specimens of Thermosetting Materials ISO 295:1991
EN ISO 3126:2005 Plastics piping systems - Plastics components - Determination of dimensions ISO 3126:2005
EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials ISO 16137:2006
EN ISO 294-2:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
EN ISO 294-4:1998 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 4: Determination of Moulding Shrinkage ISO 294-4:1997
EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
EN 15348:2007 Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates
EN 15345:2007 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
EN 16063:2011 Packaging - Rigid plastic containers - Nomenclature of plastic finishes
EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
EN ISO 294-3:1998 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates ISO 294-3:1996
EN ISO 294-3:2003 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates ISO 294-3: 2002
EN ISO 3671:2023 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:2023)
EN ISO 177:1999 Plastics - Determination of Migration of Plasticizers
EN 13067:2012 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
EN 15344:2007 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
EN 15344:2021 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
prEN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021)
PD CEN/TS 17627:2021 Plastics - Recycled plastics - Determination of solid contaminants content
CEN/TS 17627:2021 Plastics - Recycled plastics - Determination of solid contaminants content
EN 15343:2007 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
EN 15342:2007 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
prEN ISO 3671 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO/DIS 3671:2022)
prEN ISO 527-2 rev Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics

海关总署, plastic voc

SN/T 5346-2021 Determination of Volatile Organic Compounds (VOC) in Powder Coatings
SN/T 5408-2022 How to identify recycled plastics and modified plastics

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), plastic voc

ASHRAE AT-01-13-1-2001 Correlations between the Internal Diffusion and Equilibrium Partition Coefficients of Volatile Organic Compounds (VOCs) in Building Materials and the VOC Properties

(U.S.) Ford Automotive Standards, plastic voc

FORD WSS-M4D744-A5-2021 ACETAL (POM) MOLDING COMPOUND, HOMOPOLYMER, HIGH IMPACT, LOW VOC EMISSION, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M16J16-A-1996 PAINT, WATERBORNE, 2 COMPONENT, COMPLIANCE VOC, PLASTICS, EXTERIOR
FORD ESB-M99P14-A3-1985 PAD PRINTING, FIRST SURFACE PLASTIC OR PAINTED PLASTIC, EXTERIOR
FORD M99J281-A-1990 COATING-PLASTIC, STRIPPABLE
FORD WD 954-2012 Material and Performance Requirements for Screws Used in Thermoplastics Materials
FORD WD954-2015 Material and Performance Requirements for Screws Used in Thermoplastics Materials

RU-GOST R, plastic voc

GOST R 52485-2005 Paint materials. Determination of volatile organic compound (VOC) content. Difference method
GOST 31991.1-2012 Paint materials. Determination of volatile organic compound (VOC) content. Difference method
GOST 31991.2-2012 Paint materials. Determination of volatile organic compound (VOC) content. Gas-chromatographic method
GOST R 52486-2010 Paint materials. Determination of volatile organic compound (VOC) content. Gas-chromatographic method
GOST R 52486-2005 Paint materials. Determination of volatile organic compound (VOC) content. Gas-chromatographic method
GOST R 50491-1993 Plastics. Aminoplastic moulding materials. Determination of volatile matter
GOST 15088-2014 Plastics. Method for determination of Vicat softening temperature of thermoplastics
GOST R ISO 306-2012 Plastics. Thermoplastic materials. Determination of Vicat softening temperature

US-FCR, plastic voc

FCR UFGS-09 97 13.15-2015 LOW VOC POLYSULFIDE INTERIOR COATING OF WELDED STEEL PETROLEUM FUEL TANKS

AENOR, plastic voc

UNE-EN 15347:2008 Plastics - Recycled Plastics - Characterisation of plastics wastes
UNE 53036:2001 Plastics. Determination of specular gloss of plastic materials.
UNE 53104:1986 PLASTICS. ARTIFICIAL AGING OF THE PLASTIC MATERIALS. EQUIPMENT RESTED UPON THE FLUORESCENT LAMPS
UNE 53206:2012 Plastics. Large plastic bags made with plastic films. Characteristics and test methods
UNE-CEN/TS 16010:2015 EX Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
UNE 53316:2012 Plastics. Determination of chemical resistance of glass reinforced plastics.
UNE-EN ISO 3915:2000 PLASTICS - MEASUREMENT OF RESISTIVITY OF CONDUCTIVE PLASTICS (ISO 3915:1981)
UNE-EN 16063:2012 Packaging - Rigid plastic containers - Nomenclature of plastic finishes
UNE-EN 15344:2008 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
UNE-EN 15345:2008 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates

Danish Standards Foundation, plastic voc

DS/EN 15347:2008 Plastics - Recycled Plastics - Characterisation of plastics wastes
DS/EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics
DS/ISO 1184:1985 Plastics. Determination of tensile properties of films
DS/CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
DS/CEN/TS 16010:2020 Plastics – Recycled plastics – Sampling procedures for testing plastics waste and recyclates
DS/EN ISO 3671:1999 Plastics - Aminoplastic moulding materials - Determination of volatile matter
DS/EN ISO 11469:2000 Plastics - Generic identification and marking of plastics products
DS/EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
DS/EN 13655:2003 Plastics - Mulching thermoplastic films for use in agriculture and horticulture
DS/EN ISO 3126:2005 Plastics piping systems – Plastics components – Determination of dimensions
DS/EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials
DS/EN 16063:2012 Packaging - Rigid plastic containers - Nomenclature of plastic finishes
DS/EN ISO 14526-3:2000 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds
DS/EN ISO 15252-3:2000 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 3: Requirements for selected moulding compounds
DS/EN ISO 177:1999 Plastics - Determination of migration of plasticizers
DS/CEN/TS 17627:2021 Plastics – Recycled plastics – Determination of solid contaminants content
DS/EN 15344:2008 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
DS/EN 15345:2008 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
DS/EN 15344:2021 Plastics – Recycled plastics – Characterization of Polyethylene (PE) recyclates
DS/ISO 15853:2000 Thermoplastics materials - Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
DS/EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics

Lithuanian Standards Office , plastic voc

LST EN 15347-2008 Plastics - Recycled Plastics - Characterisation of plastics wastes
LST CEN/TS 16010-2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
LST EN 13655-2002 Plastics - Mulching thermoplastic films for use in agriculture and horticulture
LST EN ISO 3915:2001 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981)
LST EN 16063-2012 Packaging - Rigid plastic containers - Nomenclature of plastic finishes
LST EN ISO 3671:2001 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976)
LST CEN/TS 17627-2021 Plastics - Recycled plastics - Determination of solid contaminants content
LST EN 15344-2021 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
LST EN 15345-2008 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
LST EN 15344-2008 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, plastic voc

GB/T 34675-2017 Determination of volatile organic compound(VOC) content in radiation curable coatings
GB/T 34682-2017 Determination of volatile organic compound(VOC) content in reactive diluent containing coatings
GB/T 1404.3-2008 Plastics - Phenolic powder moulding compounds - Part 3: Requirements for selectes moulding compounds

American Society for Testing and Materials (ASTM), plastic voc

ASTM D6266-00a(2023) Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM D5087-02(2021) Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM D6266-00a(2017) Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM D3960-01 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D3960-04 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D3960-02 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D3960-05(2018) Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM F409-17 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
ASTM D1004-07 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
ASTM D1692-68 Standard Method Of Test For Flammability Of Plastic Sheeting And Cellular Plastics

CO-ICONTEC, plastic voc

SSPC - The Society for Protective Coatings, plastic voc

GUIDE 10-1994 Guide to Specifying Coatings Conforming to Volatile Organic Compound (VOC) Content Requirements

未注明发布机构, plastic voc

DIN EN ISO 11890-1:2002 Coating materials – Determination of the content of volatile organic compounds (VOC content) – Part 1: Differential method
DIN EN ISO 846:2019 Plastics – Determination of the effect of microorganisms on plastics
BS EN ISO 3126:2005(2006) Plastics piping systems — Plastics components — Determination of dimensions
DIN EN ISO 293:2003 Plastics — Compression molding test specimens of thermoplastic materials

Japanese Industrial Standards Committee (JISC), plastic voc

JIS K 7145:2000 Plastics -- Aminoplastic moulding materials -- Determination of volatile matter
JIS K 7151 AMD 1:2009 Plastics -- Compression moulding test specimens of thermoplastic materials(Amendment 1)
JIS K 7212:1999 Plastics -- Determination of thermal stability of thermoplastics -- Oven method
JIS K 7152-3:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates
JIS K 7152-2:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars
JIS B 5107:1995 Guide pins of moulds for plastics
JIS B 5111:2000 Locating rings of moulds for plastics
JIS K 7206:1999 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
JIS K 7206:2016 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
JIS K 7152:1995 Plastics -- Injection moulding of test specimens of thermoplastic materials
JIS K 6949:2015 Plastics -- Methods for the preparation of samples for biodegradation testing of plastic materials
JIS K 7152-4:2001 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage
JIS K 7152-4:2006 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage

IX-SA, plastic voc

AS 203:1972

Society of Automotive Engineers (SAE), plastic voc

SAE USCAR9-1998 Classification system for automotive tooling, machinery and equipment low VOC waterborne paint systems

CZ-CSN, plastic voc

CSN 64 0806-1981 Bulk Plastics factor of moulding aterials
CSN 64 0861-1979 Plastios. Determination of melt flow index of thermoplastics
CSN 64 2013 Z4-2000
CSN 64 2013 Z3-1999
CSN 64 0521-1984 Plastics. Determination of the Vicat oftening temperature of thermo- lastics
CSN 64 0752-1979 1'lustics. elormiuation ol iman- esoence resistance í plaslirs
CSN 64 0612-1981 Plastics. Determination f the Charpy impact esistance of rigld lastics.
CSN ISO 293:1992 Plastics. Compresion moulding test specimens of thermoplastic materials
CSN 64 0626-1989 Plastics. Determination of tensile trenght of thermoplastics pipes on n annular test piece
CSN 64 0111-1993 Plastics. Determination of Density and Relative Density of Non-cellular Plastic
CSN 64 0201-1990 Plastics tests. Sampling
CSN 64 0244-1981 Testing of piastics. etermination migration f plasticizers

AGMA - American Gear Manufacturers Association, plastic voc

P149.02-1981 Wear Behavior of Plastics on Plastics

BE-NBN, plastic voc

NBN T 40-101-1988 Plastics - Determination of the melt flow rate of thermoplastics

PL-PKN, plastic voc

PN C89418-1990 Plastics Determination of volatile matter in thermoplastics
PN C89048-1973 Plastics Determination of the refractive index of transparent plastics
PN C89012-1988 Plastics Recommended practice for injection moulding test specirnens of thermoplastic materials
PN C89024-1993 Plastics. Thermoplastic materials. Determination of Vicat softening temperature
PN C89019-1990 Granulated and powdered plastics Packing, storage and transport
PN-EN 15344-2021-10 E Plastics--Recycled plastics--Characterisation of Polyethylene (PE) recyclates

CH-SNV, plastic voc

VSM 15158-1971 Rectangular or square parallel keys and their corresponding keyways (Dimensions in millimetres)
SNV 93100-1966
VSM 12803-1926
VSM 11855-1974
SEV 191 d-1950
VSM 34161.2-1972
SN EN 15344-2021 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
SEV 1003-1959
SN 198 421-1984 Measurement of thickness of textile fabrics

YU-JUS, plastic voc

JUS G.S2.605-1980 Plastics Compression moulding test specimens of thermosetting materials
JUS G.S2.762-1997 Plastics - Determination of coefficient of friction of plastic films
JUS G.S2.741-1996 Plastics - Optical properties of thermoplastic films - Determination of clarity of transparent plastic films
JUS G.S2.740-1996 Plastics - Optical properties of thermoplastic films - Determination of specular gloss of plastic films
JUS G.S2.742-1996 Plastics - Optical properties of thermoplastic films - Determination of haze of transparent plastic films
JUS G.S2.601-1991 Plastics.Determaination of the melt flow rate of thermoplastic
JUS G.S2.641-1991 Pastics.Thermoplastic materials.Determination of Vicat softening temperature
JUS G.S2.607-1980 Plastics. Recommended practice for injection moulding of thermoplastic specimens

TR-TSE, plastic voc

TS 1149-1978 PLASTICS - INJECTION MOULDING TEST SPECIMENS OF TERMOPLASTIC MATERIALS
TS 1825-1975 PLASTICS DETERMINATION OF THE VICAT SOFTENING TEMPERATURE OF THERMOPLASTICS
TS 985-1971 PLASTICS DETERMINATION OF FLEXURAL PROPERTIES OF RIGID PLASTICS
TS 1408-1978 PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOSETTING MATERIALS
TS 710-1969 PLASTICS DETERMINATION OF THE RESISTANCE OF PLASTICS TO CHEMICAL SUBSTANCES
TS 984-1971 PLASTICS DETERMINATION OF MIGRATION OF PLASTICIZERS
TS 3154-1978 PLASTICS - AMINOPLASTIC MOULDING MATERIALSDETERMINATION OF VOLATILE MATTER

FI-SFS, plastic voc

SFS 4238 E-1979 In the event of any differences in interpretation of this standard the Finnish version shall take precedence over this translation.
SFS-ISO 1184:1987 In case of interpretation disputes the English text applies
SFS-ISO 171 E:1986 This standard is approved in English
SFS 4386-1979
SFS 3829-1977
SFS 3257-1976 MUOVIT. KESTOMUOVISET RUISKUPURISTETUT KOEKAPPALEET

RO-ASRO, plastic voc

STAS 9047-1971 PLASTICS Determination of the melt flow rate of thermoplastics
STAS SR ISO 3915:1981 Plastics. Measurement of resistivity of conductive plastics
STAS 9595-1974 PLASTICS Determination of refractive index of transparent plastics
STAS 6127-1968
STAS SR ISO 3671:1993 Plastics. Aminoplastic moulding materials. Determination of volatile matter
STAS 6216-1980 PLASTIGS Determination of loss of plasticizers Activated carbon method
SR ISO 177:1995 Plastics - Determination of megration of plasticizers
STAS SR ISO 8570:1996 Plastics - Film and sheeting - Determination of cold-crack temperature
STAS SR ISO 8295:1986 Plastics - Films and sheeting - Determination of the coefficients of friction
STAS 12810-1990 Plastics Determination of isotactic index of plastics based on polypropylene
STAS E 12194-1984 PLASTICS Shrinkage determination of thermoplastic materials used lor injection moulding
STAS 12128-1982 PLASTICIZERS FOR PLASTICS Acidity determination
SR ISO 4592:1992 Plastics-Film and sheeting-Determination of lenghth and width.
STAS 6129-1980 PLASTICS Determination of frost brittle point of foils and plates of thermosetting materials
STAS 9613-1974 PLASTICS Determination of water vapour transmission rate of cellular plastics

CEN - European Committee for Standardization, plastic voc

EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
EN ISO 1133:1999 Plastics - Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics
EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
EN ISO 11890-2:2006 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method
EN ISO 11890-2:2001 Paints and Varnishes - Determination of Volatile Organic Compound (VOC) Content - Part 2: Gas-Chromatographic Method
EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
EN ISO 7808:1998 Plastics - Thermosetting moulding materials- Determination of transfer flow
EN ISO 3671:1998 Plastics - Aminoplastic moulding materials - Determination of volatile matter

HU-MSZT, plastic voc

SE-SIS, plastic voc

SIS SS 16 12 18-1980 Plastics — Determination of flexural properties of rigid plastics
SIS SS 16 42 01-1984 Plastics — Aminoplastic moulding materials — Determination of volatile matter
SIS 16 17 07-1970 Plastics. Determination of migration of plasticizers
SIS SS 01 16 01-1984
SIS SS 16 11 43-1982 Plastics - Determination of apparent bulk density of compacted moulding material

GM North America, plastic voc

GM GM6062M-1986 Propylene Plastic Molding Compounds Replaced by GM7001M
GM GM6064M-1986 Polyethylene Plastic Molding Compounds Replaced by GM7001M
GM GM6065M-1986 Polystyrene Plastic Molding Compounds Replaced by GM7001M
GM GM6069M-1986 Polycarbonate Plastic Molding Compounds Replaced by GM7001M
GM GM9151P-2001 Pliability of Plastic Material

ES-UNE, plastic voc

UNE-EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)
UNE-CEN/TS 16010:2022 EX:2022 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
UNE-EN ISO 11469:2017 Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
UNE-EN ISO 14526-3:2000 PLASTICS - PHENOLIC POWDER MOULDING COMPOUNDS (PF-PMCs) - PART 3: REQUIREMENTS FOR SELECTED MOULDING COMPOUNDS. (ISO 14526-3:1999)
UNE-EN ISO 294-3:2021 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
UNE-EN ISO 10210:2018 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)
UNE-EN 15344:2022 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
UNE-EN ISO 14530-3:2001 Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 3: Requirements for selected moulding compounds. (ISO 14530-3:1999)
UNE-CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material (Endorsed by Asociación Española de Normaliz...

VDI - Verein Deutscher Ingenieure, plastic voc

VDI 2006-1970 Gestalten von Spritzgussteilen aus thermoplastischen Kunststoffen

Association of German Mechanical Engineers, plastic voc

DVS 2204-1-2010
DVS 2204-1-2011 Adhesive bonding of thermoplastics
DVS 2204-3-1981 Glueing of thermoplastics; polystyrene and allied plastics
VDI 3821-1978 Adhesive bonding of plastics
DVS 2243-2005
DVS 2243-2013
DVS 2243-2003
DVS 2204-4-1981 Glueing of thermoplastics; polyamides
DVS 2243-2014

United States Navy, plastic voc

NAVY MIL-P-17303 D (2)-1991 PACKING MATERIALS, PLASTIC METALLIC AND PLASTIC NONMETALLIC
NAVY MIL-P-17303 D-1984 PACKING MATERIALS, PLASTIC METALLIC AND PLASTIC NONMETALLIC
NAVY MIL-P-8045 B (4)-1999 PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL
NAVY MIL-P-8045 B NOTICE 1-1999 PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL
NAVY MIL-P-8045 B-1964 PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL

国家市场监督管理总局、中国国家标准化管理委员会, plastic voc

GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars
GB/T 24128-2018 Plastics—Assessment of the effectiveness of fungistatic compounds in plastics formulations
GB/T 39385-2020 Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility
GB/T 39818-2021 Plastics—Thermosetting moulding materials—Determination of shrinkage
GB/T 17037.5-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy

JP-JASO, plastic voc

JASO M902-2007 Road vehicles-Interior parts and materials-Measurement methods of diffused volatile organic compounds(VOC)

AT-ON, plastic voc

ONR CEN/TS 16010-2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
OENORM EN 15344-2021 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
ONR CEN/TS 17627-2021 Plastics - Recycled plastics - Determination of solid contaminants content
OENORM EN ISO 3915:2021 Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 3915:2021)

IT-UNI, plastic voc

UNI CEN/TS 16010-2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
UNI 5640-1974
UNI EN 15344-2021 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
UNI CEN/TS 17627-2021 Plastics - Recycled plastics - Determination of solid contaminants content

VN-TCVN, plastic voc

TCVN 4501-2-2009 Plastics.Determination of tensile propertie.Part 2: Test conditions for moulding and extrusion plastics
TCVN 4501-2-2014 Plastics - Determination of tensile properties .Part 2:Test conditions for moulding and extrusion plastics

Defense Logistics Agency, plastic voc

DLA MS3339 REV B NOTICE 1-1998 PLATE, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS
DLA MS3339 REV B-1974 PLATE, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS
DLA MS3341 REV B NOTICE 1-1998 BRACKET, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS
DLA MS3341 REV B-1974 BRACKET, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS

KR-KS, plastic voc

KS M ISO 11469-2018 Plastics — Generic identification and marking of plastics products
KS M ISO 177-2018 Plastics — Determination of migration of plasticizers
KS M ISO 13968-2020 Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility

JSAE - Society of Automotive Engineers of Japan@ Inc., plastic voc

JASO M902-2011 Automotive Parts - Interior parts and materials - Measurement methods of diffused volatile organic compounds (VOC)

SAE - SAE International, plastic voc

SAE T-122-2009 Engineering Plastics and Plastic Composites In Automotive Applications

ES-AENOR, plastic voc

UNE 53 019

Professional Standard - Chemical Industry, plastic voc

HG/T 4454-2012 Plastics.Determination of migration of plasticizers

ZA-SANS, plastic voc

SANS 5852:1976 Plastic limit and plasticity index of fines in aggregates for base-courses
SANS 1655:2004 Welding of thermoplastics - Welding rods, fillers and solvents

Standard Association of Australia （SAA）, plastic voc

AS 1368:2000 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

DE-VDA, plastic voc

VDA 230-206 Teil 3-2007 Analyses of the stick-slip performance of material parts - Specific section - Plastic web: Plastic web against plastic web

CU-NC, plastic voc

NC 30-61-1987 Plastics. Compression Moulding of Thermoplastic Materials. General Requirements
NC 30-36-1984 Plastics Determination of Transparent Plastic Materials Refraction Index. Testing Method

Indonesia Standards, plastic voc

SNI 06-4595-1998 Plastics - Injections moulding test specimens of thermo plastic materials
SNI ISO 527-2:2011 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics

GM Europe, plastic voc

GME 14012-2008 Thermoplastic Tubing for Hot Diesel Fuel Lines (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14587.)

Military Standards (MIL-STD), plastic voc

DOD A-A-51770-1986 BOTTLE, SCREW CAP, (PLASTIC)
DOD A-A-53478-1988 SPATULA, DENTAL, (PLASTIC)
DOD A-A-54096-1990 TRAY, INSTRUMENT (PLASTIC)

PT-IPQ, plastic voc

NP 2216-1988 Textile glass reinforced plastics Determination of loss in mass by calcination