ZH

RU

ES

How to use the evaporator

How to use the evaporator, Total:445 items.

In the international standard classification, How to use the evaporator involves: Burners. Boilers, Shipbuilding and marine structures in general, Analytical chemistry, Aircraft and space vehicles in general, Lubricants, industrial oils and related products, Clothes, Refrigerating technology, Waxes, bituminous materials and other petroleum products, Ventilators. Fans. Air-conditioners, Installations in buildings, Road engineering, Air quality, Internal combustion engines for road vehicles, Components for aerospace construction, Protective equipment, Construction materials, Gas and steam turbines. Steam engines, Fluid storage devices, Inorganic chemicals, Plastics, Environmental testing, Measurement of fluid flow, Earthworks. Excavations. Foundation construction. Underground works, Organic chemicals, Equipment for the metallurgical industry, Fuels, Food products in general, Physics. Chemistry, Sterilization and disinfection, Domestic electrical appliances in general, Petroleum products in general, Measurement of volume, mass, density, viscosity, Rubber and plastics products, Natural gas, Products of the chemical industry, Body care equipment, Footwear, Road vehicles in general, Acoustics and acoustic measurements, Mathematics, Test conditions and procedures in general, Vocabularies, Software development and system documentation, Wind turbine systems and other alternative sources of energy, Nuclear energy engineering, Radiocommunications, Applications of information technology, Floor treatment appliances, Sugar. Sugar products. Starch, Packaging materials and accessories, Thermodynamics and temperature measurements, Domestic, commercial and industrial heating appliances, Protection of and in buildings, Animal feeding stuffs, Radiation measurements, Metrology and measurement in general, Electricity. Magnetism. Electrical and magnetic measurements, Special measuring equipment for use in telecommunications, Protection against fire, Explosion protection, Surface treatment and coating, Electromagnetic compatibility (EMC), Kitchen equipment, Road vehicle systems, Medical equipment, Aerospace electric equipment and systems, Linear and angular measurements, Glass, Construction industry, Industrial automation systems, Optics and optical measurements, METALLURGY, Water quality.


Association Francaise de Normalisation, How to use the evaporator

  • NF E32-131:1982 Steam generators. Conventional assessment of wall loss in operation.
  • NF EN 12697-3+A1:2018 Mélanges Bitumineux - Méthodes d'essai - Partie 3 : extraction des bitumes à l'évaporateur rotatif
  • NF EN 12697-3/IN1:2018 Mélanges Bitumineux - Méthodes d'essai - Partie 3 : extraction des bitumes à l'évaporateur rotatif
  • NF EN ISO 10801:2011 Nanotechnologies - Génération de nanoparticules de métal pour essais de toxicité par inhalation en utilisant la méthode de condensation/évaporation
  • FD ISO/TR 22582:2019 Cosmétiques - Méthodes d'évaporation des extraits et de calcul des indices biologiques - Informations complémentaires à utiliser avec l'ISO 16128-2
  • NF E32-020-5:1991 Insdustrial heating equipments. Safety of steam or superheated steam generators, permanently manned or not. Part 5 : specific requirements for non-pulverized coal-fuelled installations.
  • NF T51-194*NF EN 16472:2014 Plastics - Method for accelerated photoageing using medium pressure mercury vapour lamps
  • NF EN 16849:2016 Bitumes et liants bitumineux - Détermination de la teneur en eau des émulsions de bitume - Méthode par évaporation à la balance dessiccatrice
  • NF EN 60244-10:1993 Méthodes de mesure applicables aux émetteurs radioélectriques - Dixième partie : méthodes de mesure applicables aux émetteurs et réémetteurs de télévision, et utilisant les signaux d'insertion
  • NF EN 16472:2014 Plastiques - Méthode de photovieillissement artificielle accéléré utilisant des lampes à vapeur de mercure à moyenne pression
  • NF EN ISO 15106-1:2005 Plastiques - Film et feuille - Détermination du coefficient de transmission de vapeur d'eau - Partie 1 : méthode utilisant un détecteur d'humidité
  • NF T16-302*NF EN ISO 10801:2011 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method.
  • NF EN 12697-4:2023 Mélanges Bitumineux - Méthodes d'essai - Partie 4 : extraction des bitumes à la colonne à distiller
  • NF T20-606:1982 Volatile organic liquids for industrial use. Determination of dry residue after evaporation on a water bath-general method.
  • NF EN ISO 15106-3:2005 Plastiques - Film et feuille - Détermination du coefficient de transmission de vapeur d'eau - Partie 3 : méthode utilisant un détecteur électrolytique
  • NF P98-818-3:2005 Bituminous mixtures - Test methods for hot mix asphalt - Part 3 : bitumen recovery : rotary evaporator.
  • NF S98-051-8*NF EN 868-8:2018 Packaging for terminally sterilized medical devices - Part 8 : re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
  • NF EN 868-8:2018 Emballages des dispositifs médicaux stérilisés au stade terminal - Partie 8 : conteneurs réutilisables de stérilisation pour stérilisateurs à la vapeur d'eau conformes à l'EN 285 - Exigences et méthodes d'essai
  • NF E09-502:1988 Cleaning appliances using chlorinated and chloro-fluorinated solvents - Measurement method of solvent vapour concentration at opening plan of the appliance - Static functionning without charging
  • NF V03-012*NF EN 15911:2010 Foodstuffs - Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection.
  • NF C73-185-5*NF EN IEC 62885-5:2018 Surface cleaning appliances - Part 5 : high pressure cleaners and steam cleaners for household and commercial use - Methods for measuring performance
  • NF X43-060-3*NF EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3 : guide to selection, use and maintenance.
  • NF EN IEC 62885-5:2018 Appareils de nettoyage des surfaces - Partie 5 : appareils de nettoyage à haute pression et appareils de nettoyage à vapeur à usage domestique et commercial - Méthodes de mesure de l'aptitude à la fonction
  • NF S66-402:2011 Flame arresters - Performance requirements, test methods and limits for use.
  • NF S66-402*NF EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits for use
  • NF EN ISO 16852:2017 Arrête-flammes - Exigences de performance, méthodes d'essai et limites d'utilisation
  • NF B35-309:1983 Laboratory glassware - Volumetric glassware - Methods for testing and use
  • NF ISO 18869:2020 Transmissions hydrauliques - Méthodes d'essai pour les raccords actionnés avec ou sans outils
  • NF EN IEC 61855:2022 Appareils électriques destinés aux soins des cheveux pour usages domestiques et analogues - Méthodes de mesure de l'aptitude á la fonction
  • NF EN 15218:2022 Climatiseurs et groupes refroidisseurs de liquide à condenseur refroidi par évaporation et compresseur entraîné par moteur électrique pour la réfrigération des locaux - Termes, définitions, conditions d'essai, méthodes d'essai et exigences
  • NF EN 13528-3:2004 Qualité de l'air ambiant - Échantillonneurs par diffusion pour la détermination de la concentration des gaz et vapeurs - Exigences et méthodes d'essai - Partie 3 : guide pour la sélection, l'utilisation et la maintenance
  • NF C73-209-1:2015 Household electric cooking appliances - Part 1 : ranges, ovens, steam ovens and grills - Methods for measuring performance
  • NF C73-209-1/A1*NF EN IEC 60350-1/A1:2021 Household electric cooking appliances - Part 1 : ranges, ovens, steam ovens and grills - Methods for measuring performance
  • NF EN ISO 19581:2020 Mesurage de la radioactivité - Radionucléides émetteurs gamma - Méthode d'essai de dépistage par spectrométrie gamma utilisant des détecteurs par scintillation
  • NF C73-683*NF EN 62863:2017 Methods of measuring performances of electric hair clippers or trimmers for household use

Korean Agency for Technology and Standards (KATS), How to use the evaporator

  • KS V 4030-2005 Reverse osmosis type evaporators for marine use
  • KS I 4019-2017(2022) Test methods of remanufactured vaporizer for LPG automotive
  • KS F 2396-2014 Standard practice for recovery of asphalt from solution using rotary evaporator
  • KS R 1125-2004 Test method of canisters for automobile evaporative emission control systems
  • KS R 1125-2014 Test method of canisters for automobile evaporative emission control systems
  • KS F 2396-2004 Standard practice for recovery of asphalt from solution using the rotary evaporator
  • KS M ISO 759-2017(2022) Volatile organic liquids for industrial use — Determination of dry residue after evaporation on water bath — General method
  • KS T 1348-2011 Transport packaging-General specifications for testing
  • KS M ISO 759:2007 Volatile organic liquids for industrial use-Determination of dry residue after evaporation on water bath-General method
  • KS M ISO 759:2017 Volatile organic liquids for industrial use — Determination of dry residue after evaporation on water bath — General method
  • KS C IEC 61855-2005(2020) Household electrical hair care appliances-Methods of measuring the performance
  • KS C CISPR 19-2013 Electromagnetic compatibility(EMC)- Guidance on the use of the substitution method for measurement of radiation from microwave ovens for frequencies above 1 GHz
  • KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
  • KS I ISO TS 7849-1:2019 Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 1: Survey method using a fixed radiation factor
  • KS P 1101-2010 Guidance for selection, use and maintenance of respiratory protective devices
  • KS F 2508-2007(2017) Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine
  • KS B ISO 4787:2007 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
  • KS B ISO 4787:2009 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity

American Society for Testing and Materials (ASTM), How to use the evaporator

  • ASTM D3539-87(1996) Standard Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer
  • ASTM D5800-14 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM F2370-15 Standard Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin
  • ASTM F2370-16 Standard Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin
  • ASTM F2370-22 Standard Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin
  • ASTM F331-13(2020) Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
  • ASTM D6375-09 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
  • ASTM D5800-03 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-03a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM F2370-10 Standard Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin
  • ASTM F1868-14 Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
  • ASTM D5404-03 Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
  • ASTM D5404/D5404M-12(2017) Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
  • ASTM F3634-23 Standard Guide for Preparing Weathered Samples of Oil Using a Rotary Evaporator
  • ASTM F331-05 Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
  • ASTM F331-13 Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
  • ASTM D3483-14 Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
  • ASTM F1868-23 Standard Test Method for Thermal Resistance, Evaporative Resistance, and Total Heat Loss Measurements of Clothing Materials Using a Sweating Hot Plate
  • ASTM F1868-17 Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
  • ASTM D3483-05 Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
  • ASTM D3483-83(2005) Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
  • ASTM D3483-83(1999) Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
  • ASTM D3483-14(2022) Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
  • ASTM D3483-05(2009) Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
  • ASTM E3323-22 Standard Test Method for Lipid Quantitation in Liposomal Formulations Using High Performance Liquid Chromatography (HPLC) with an Evaporative Light-Scattering Detector (ELSD)
  • ASTM D5800-18a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-19 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-05 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-00ae1 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-00a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-04a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-04 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-08 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-20 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-19a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-18 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-14e1 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-14e2 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-15 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-15a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM F2370-05 Standard Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin
  • ASTM D5800-21 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5404/D5404M-21 Standard Practice for Recovery of Asphalt Binder from Solution Using the Rotary Evaporator
  • ASTM D381-04e1 Standard Test Method for Gum Content in Fuels by Jet Evaporation
  • ASTM D381-00 Standard Test Method for Gum Content in Fuels by Jet Evaporation
  • ASTM D381-01 Standard Test Method for Gum Content in Fuels by Jet Evaporation
  • ASTM D381-80e1 Standard Test Method for Existent Gum in Fuels by Jet Evaporation
  • ASTM D381-09 Standard Test Method for Gum Content in Fuels by Jet Evaporation
  • ASTM D381-12 Standard Test Method for Gum Content in Fuels by Jet Evaporation
  • ASTM D381-12(2017) Standard Test Method for Gum Content in Fuels by Jet Evaporation
  • ASTM F1249-94b Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM F1249-20 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM D4888-06 Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D4888-06(2011) Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D5762-05 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
  • ASTM D6375-99a Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
  • ASTM D6375-05 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
  • ASTM D6375-09(2019) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
  • ASTM D6375-09(2014) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer 40;TGA41; Noack Method
  • ASTM D4754-98(2003) Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
  • ASTM D4754-98 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
  • ASTM D4754-11 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
  • ASTM F1868-98 Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
  • ASTM F1868-02 Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
  • ASTM F1868-09 Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
  • ASTM E2008-99 Standard Test Method for Volatility Rate by Thermogravimetry
  • ASTM F1249-13 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM D2758-94(2003) Standard Test Method for Engine Coolants by Engine Dynamometer
  • ASTM D2758-94(1998)e1 Standard Test Method for Engine Coolants by Engine Dynamometer
  • ASTM D2758-94(2009) Standard Test Method for Engine Coolants by Engine Dynamometer
  • ASTM E3323-21 Standard Test Method for Lipid Quantitation in Liposomal Formulations Using High Performance Liquid Chromatography (HPLC) with an Evaporative Light-Scattering Detector (ELSD)
  • ASTM C796-04 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
  • ASTM C796-97 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
  • ASTM F1868-12 Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
  • ASTM D8186-18 Standard Test Method for Measurement of Impurities in Graphite by Electrothermal Vaporization Inductively Coupled Plasma Optical Emission Spectrometry (ETV-ICP OES)
  • ASTM C1832-23 Standard Test Method for Determination of Uranium Isotopic Composition by Modified Total Evaporation (MTE) Method Using Thermal Ionization Mass Spectrometer
  • ASTM C1832-22 Standard Test Method for Determination of Uranium Isotopic Composition by Modified Total Evaporation (MTE) Method Using Thermal Ionization Mass Spectrometer
  • ASTM F609-05 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
  • ASTM D2570-10 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
  • ASTM D5454-93(1999) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
  • ASTM D5454-04 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
  • ASTM D5454-11(2020) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
  • ASTM D4888-06(2015) Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM E1999-11 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
  • ASTM D1754/D1754M-09 Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
  • ASTM F609-96e1 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
  • ASTM F609-96 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
  • ASTM C1832-21 Standard Test Method for Determination of Uranium Isotopic Composition by Modified Total Evaporation (MTE) Method Using Thermal Ionization Mass Spectrometer
  • ASTM E1488-12(2023) Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
  • ASTM D4888-88(1999) Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM E398-20 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
  • ASTM D4888-20 Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D2570-96(2002)e1 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
  • ASTM D2570-91 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
  • ASTM D2570-08 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
  • ASTM D2570-09 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
  • ASTM E2321-03 Standard Practice for Use of Test Methods E 96 for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)
  • ASTM C1832-16 Standard Test Method for Determination of Uranium Isotopic Composition by the Modified Total Evaporation (MTE) Method Using a Thermal Ionization Mass Spectrometer
  • ASTM E2551-07 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
  • ASTM E2551-13 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
  • ASTM D5454-11 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
  • ASTM D5454-11e1 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
  • ASTM D8446-22 Standard Test Method for Water Vapor Content in Compressed Air Using Electronic Moisture Analyzers
  • ASTM B799-95(2014) Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
  • ASTM E2314-03(2008) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
  • ASTM D2570-16 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
  • ASTM D7922-14 Standard Test Method for Determination of Glycol for In-Service Engine Oils by Gas Chromatography
  • ASTM D6984-11 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
  • ASTM D6984-10b Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
  • ASTM D7320-10b Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
  • ASTM D6984-10be1 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
  • ASTM D7320-11 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
  • ASTM D4270-95 Standard Guide for Using Existing Practices in Developing and Writing Test Methods
  • ASTM E408-13(2019) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
  • ASTM D7593-14 Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
  • ASTM C745-92(1999) Standard Test Method for Heat Flux Through Evacuated Insulations Using a Guarded Flat Plate Boiloff Calorimeter
  • ASTM C796/C796M-12 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
  • ASTM E2314-03(2014) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
  • ASTM D7899-19 Standard Test Method for Measuring the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method
  • ASTM D4606-15 Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
  • ASTM D789-15 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)
  • ASTM F1769-97 Standard Test Method for Measurement of Diffusivity, Solubility, and Permeability of Organic Vapor Barriers Using a Flame Ionization Detector (Withdrawn 2004)
  • ASTM F2298-03 Standard Test Methods for Water Vapor Diffusion Resistance and Air Flow Resistance of Clothing Materials Using the Dynamic Moisture Permeation Cell
  • ASTM E1914-98 Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis
  • ASTM E1914-98(2003) Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis
  • ASTM D5293-14 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between ndash;5deg;C and ndash;35deg;C Using Cold-Cranking Simulator
  • ASTM D5293-17 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between &x2013;10&x2009;&xb0;C and &x2013;35&x2009;&xb0;C Using Cold-Cranking Simulator
  • ASTM D5293-17e1 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between &x2013;10&x2009;&xb0;C and &x2013;35&x2009;&xb0;C Using Cold-Cranking Simulator
  • ASTM D5293-17a Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between &x2013;10&x2009;&xb0;C and &x2013;35&x2009;&xb0;C Using Cold-Cranking Simulator

United States Navy, How to use the evaporator

RU-GOST R, How to use the evaporator

  • GOST 7934.1-1974 Watch oils and greases. Method for the determination of evaporativity
  • PNST 246-2017 Automobile roads of general use. Petroleum bituminous binding materials. Method for isolation of bituminous binder using a rotary evaporator
  • GOST EN 12697-3-2013 Bituminous mixtures. Test methods for hot mix asphalts. Part 3. Bitumen recovery by rotary evaporator
  • GOST 19569-1989 Medical steam sterilizers. General technical requirements and test methods
  • GOST R IEC 60335-2-54-2000 Safety of household and similar electrical appliances. Particular requirements for surface-cleaning appliances employing liquids or steam and test methods
  • GOST 32404-2013 Petroleum products. Test method for gum content in fuels by jet evaporation
  • GOST 31598-2012 Steam large sterilizers. General technical requirements and test methods
  • GOST 32391-2013 Engine oils. Test method for determination of volatility by capillary gas chromatography
  • GOST 29172-1991 Liquid halogenated hydrocarbons for industrial use. Determination of residue on evaporation
  • GOST 33111-2014 Engine oils. Method for determination of apparent viscosity at temperatures between - 5 °C and - 35 °C using the cold-cranking simulator
  • GOST R 53714-2009 Motor fuels, aviation fuels and low-boiling distillates. Method for determination of existent gums by jet evaporation
  • GOST 8.206-1976 State system for ensuring the uniformity of measurements. The measuring pulse generators. Methods and means for verification
  • GOST 8.314-1978 State system for ensuring the uniformity of measurements. Low-frequency generators. Methods and means of verification
  • GOST 17750-1972 Jet fuel. Method for the determination luminometric number on the PLCHT instrument
  • GOST 30587-1998 Electrically operated household food preparation appliances. Measuring methods of operating characteristics
  • GOST 31851-2012 Industrial gas-using equipment. Air heaters. Test methods
  • GOST 28488-1990 Multichannel analyzers as multichannel scalers. Test methods
  • GOST 32250-2013 Feeds, mixed feeds. Method for determination of potassium and sodium using flame-emission spectrometry

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), How to use the evaporator

  • ASHRAE 143-2007 Method of Test for Rating Indirect Evaporative Coolers
  • ASHRAE 133-2001 Method of Testing Direct Evaporative Air Coolers
  • ASHRAE 133-2008 Method of Testing Direct Evaporative Air Coolers
  • ASHRAE 64-2005 Methods of Laboratory Testing Remote Mechanical-Draft Evaporative Refrigerant Condensers
  • ASHRAE 41.10-2008 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Flowmeters

Indonesia Standards, How to use the evaporator

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., How to use the evaporator

  • ASHRAE 143-2015 Method of Test for Rating Indirect Evaporative Coolers
  • ASHRAE 143-2000 Method of Test for Rating Indirect Evaporative Coolers
  • ASHRAE PH-97-11-2-1997 Novel Desiccant Cooling System Using Indirect Evaporative Cooler
  • ASHRAE 133-2015 Method of Testing Direct Evaporative Air Coolers
  • ASHRAE ST-16-024-2016 Low Evaporator Airflow Detection Using Fan Power for Rooftop Units
  • ASHRAE TO-98-19-3-1998 Heat Transfer Characteristics in the U-Bend of a Microfin Tube Evaporator Using R-407-C
  • ASHRAE 64-1995 Methods of Testing Remote Mechanical-Draft Evaporative Refrigerant Condensers
  • ASHRAE 64-2011 Methods of Laboratory Testing Remote Mechanical-Draft Evaporative Refrigerant Condensers
  • ASHRAE 3730-1993 Using Solubility Data for HFC-134A and Ester Lubricant Mixtures to Model an in-Tube Evaporator or Condenser
  • ASHRAE OR-16-C048-2016 Using the Poppe's Mathematical Method to Model the Thermodynamic Behavior of Evaporative Countercurrent Water Cooling Towers to Optimize Operation
  • ASHRAE NY-08-006-2008 Evaporative Cooling Choices to Maximize Waterside Economizer Use in Datacom Installations
  • ASHRAE 212-2019 Method of Test for Determining Energy Performance and Water-Use Efficiency of Add-On Evaporative Precoolers for Unitary Air-Conditioning Equipment
  • ASHRAE 3659-1993 Effects of Lubricant on Evaporator Capacity for Systems Using Mixtures of R-12/Mineral Oil and R-134a/Synthetic Oil
  • ASHRAE 4517-2002 Development of a Methodology for Baselining the Energy Use of Large MultBuilding Central Plants
  • ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
  • ASHRAE 41.9 ERTA-2017 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters

American National Standards Institute (ANSI), How to use the evaporator

  • ANSI/ASHRAE 143-2007 Methods of Testing for Rating Indirect Evaporative Coolers
  • ANSI/ASHRAE 133-2008 Method of Testing Direct Evaporative Air Coolers
  • ANSI/ASHRAE 143-2015 Method of Test for Rating Indirect Evaporative Coolers
  • ANSI/ASTM D6375:2009 Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) (Noack Method)
  • ANSI/ASHRAE 64-2005 Methods of Testing Remote Mechanical-Draft Evaporative Refrigerant Condensers
  • ANSI/ASHRAE 64-2011 Methods of Laboratory Testing Remote Mechanical-Draft Evaporative Refrigerant Condensers
  • ANSI/ASTM D2570:1998 Test Method for Simulated Service Corrosion Testing of Engine Coolants
  • ANSI/ASTM F609:1997 Test Method for Using a Horizontal Pull Slipmeter (HPS)
  • ANSI/ASTM E1488:2012 Guide for Statistical Procedures to Use in Developing and Applying Test Methods
  • ANSI/ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
  • ANSI/ASTM D3321:1994 Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
  • BS EN IEC 60350-1:2023 Household electric cooking appliances Ranges, ovens, steam ovens and grills. Methods for measuring performance (British Standard)

International Organization for Standardization (ISO), How to use the evaporator

  • ISO 21755-1:2019 Motorcycles — Measurement method for evaporative emissions — Part 1: SHED test procedure
  • ISO 759:1981 Volatile organic liquids for industrial use; Determination of dry residue after evaporation on water bath; General method
  • ISO 731-7:1977 Formic acid for industrial use; methods of test; Part VII : Determination of low contents of other volatile acids; Titrimetric method after distillation
  • ISO/DIS 23548:2011 Measurement of radioactivity — Alpha emitting radionuclides — Generic test method using alpha spectrometry
  • ISO 16852:2008 Flame arresters - Performance requirements, test methods and limits for use
  • ISO 16852:2016 Flame arresters - Performance requirements, test methods and limits for use
  • ISO 4787:1984 Laboratory glassware; Volumetric glassware; Methods for use and testing of capacity

JSAE - Society of Automotive Engineers of Japan@ Inc., How to use the evaporator

  • JASO Z116-1999 Automobile Air Conditioners - Test Method for Evaporator Cooling Performance
  • JASO E004-1992 Sampling Method of Automobile Exhaust Gas Using a Constant Volume Sampler (CVS)

Professional Standard - Aerospace, How to use the evaporator

  • QJ 2675.4-1994 Performance test methods for low temperature containers daily evaporation rate test

Professional Standard - Aviation, How to use the evaporator

  • HBm 69-1988 Test method for condenser evaporator performance with forced air flow

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to use the evaporator

  • GB/T 9740-1988 Chemical reagent--General method for the determination of dry residue after evaporation
  • GB/T 9740-2008 Chemical reagent.General method for the determination of dry residue after evaporation
  • GB/T 18443.5-2001 Testing method of cryo-insulation pressure vessels static vaporation rate measurement
  • GB/T 33066-2016(英文版) Fluorinated olefins for refrigerant use—General method for the determination of evaporation residues
  • GB/T 23949-2009 Inorganic chemicals for industrial use.General method for the determination of dry residue after evaporation
  • GB/T 33066-2016 Fluorinated olefins for refrigerant use.General method for the determination of high-boiling residues
  • GB/T 6324.2-1986 Volatile organic liquids--Determination of dry residue after evaporation on a water bath--General method
  • GB/T 5009.203-2003 Methods of analysis for the evaporated rasidues in the hygienic standard of food containers of plant fibre origin
  • GB 14763-2005 Limits and measurement methods for fuel evaporative Pollutants from heavy-duty vehicles equipped with P.I engines (Trap method)
  • GB/T 39505-2020 Method of measuring performances of electric hair clippers or trimmers for household use
  • GB/T 12180-1990 Test methods for general purpose low frequency signal generators
  • GB/T 13255.4-2009 Test methods of caprolactam for industrial use.Part 4:Determination of volatile bases content.Titrimetric method after distillation
  • GB/T 12810-1991 Laboratory glassware--Volumetric galssware--Methods for use and testing of capacity
  • GB/T 23106-2008 Household and similar electrical hair care appliances.Methods for measuring performance
  • GB/T 4214.5-2023 Test method for noise of household and similar electrical appliances—Particular requirements for electric shavers, hair clippers or trimmers

Professional Standard - Agriculture, How to use the evaporator

  • GB 9740-1988 General method for determination of chemical reagent evaporation residue
  • JB/T 6939.2-1993 Test methods for controllers for small wind turbines

GOSTR, How to use the evaporator

  • GOST R 59119-2020 Automobile roads of general use. Binding materials petroleum bituminous. Method for isolation of bituminous binder using a rotary evaporator
  • GOST ISO 16110-2-2016 Hydrogen generators using fuel processing technologies. Part 2. Test methods for performance

Military Standard of the People's Republic of China-General Armament Department, How to use the evaporator

  • GJB 5009-2001 Leak inspection method for steam generator of submarine nuclear power plant
  • GJB 4534-2002 Physiological evaluation methods for personal protective equipment Sweat evaporation and sweating volume
  • GJB 7795-2012 Evaluation methods of service life for aero engine

German Institute for Standardization, How to use the evaporator

  • DIN EN ISO 10801:2011-04 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method (ISO 10801:2010); German version EN ISO 10801:2010
  • DIN EN 12697-3:2019-03 Bituminous mixtures - Test methods - Part 3: Bitumen recovery: Rotary evaporator; German version EN 12697-3:2013+A1:2018
  • DIN CEN/TS 16931-7:2020-08 Electronic invoicing - Part 7: Methodology for the development and use of EN 16931-1 compliant structured Core Invoice Usage Specifications; German version CEN/TS 16931-7:2020
  • DIN EN 16472:2014-06 Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps; German version EN 16472:2014
  • DIN EN ISO 5817:2014-06 Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps; German version EN 16472:2014
  • DIN 18873-1:2012-12 Methods for measuring of the energy use from equipment for commercial kitchens - Part 1: Convection steamers / Note: To be replaced by DIN 18873-1 (2022-10).
  • DIN 18873-1:2022-10 Methods for measuring the energy consumption of commercial kitchen appliances - Part 1: Convection steamers / Note: Date of issue 2022-09-02*Intended as replacement for DIN 18873-1 (2012-12).
  • DIN EN 61855:2003-09 Household electrical hair care appliances - Methods of measuring the performance (IEC 61855:2003); German version EN 61855:2003 / Note: DIN 44538-1 (1985-07), DIN 44538-2 (1985-07) and DIN 44538-3 (1985-07) remain valid alongside this standard until 20...
  • DIN EN 12697-3:2019 Bituminous mixtures - Test methods - Part 3: Bitumen recovery: Rotary evaporator (includes Amendment A1:2018)
  • DIN EN 868-8:2019 Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
  • DIN EN 868-8:2019-03 Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods; German version EN 868-8:2018
  • DIN EN 16472:2014 Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps; German version EN 16472:2014

ES-UNE, How to use the evaporator

  • UNE-EN ISO 10801:2010 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method (ISO 10801:2010) (Endorsed by AENOR in February of 2011.)
  • UNE-EN 12697-3:2013+A1:2020 Bituminous mixtures - Test methods - Part 3: Bitumen recovery: Rotary evaporator
  • UNE-CEN/TS 16931-7:2020 Electronic invoicing - Part 7: Methodology for the development and use of EN 16931-1 compliant structured Core Invoice Usage Specifications (Endorsed by Asociación Española de Normalización in July of 2020.)
  • UNE-EN 62863:2018 Methods of measuring performances of electric hair clippers or trimmers for household use
  • UNE-EN IEC 62885-5:2019 Surface cleaning appliances - Part 5: High pressure cleaners and steam cleaners for household and commercial use - Methods for measuring performance
  • UNE-EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
  • UNE-EN IEC 61855:2023 Household and similar use electrical hair care appliances - Methods for measuring the performance
  • UNE-EN ISO 19581:2020 Measurement of radioactivity - Gamma emitting radionuclides - Rapid screening method using scintillation detector gamma-ray spectrometry (ISO 19581:2017) (Endorsed by Asociación Española de Normalización in April of 2020.)

British Standards Institution (BSI), How to use the evaporator

  • 18/30383297 DC BS ISO 21755-2. Motorcycles. Measurement method for evaporative emissions. Part 2. Measurement method by using permeation test procedure
  • PD CEN/TS 16931-7:2020 Electronic invoicing. Methodology for the development and use of EN 16931-1 compliant structured Core Invoice Usage Specifications
  • BS EN 16472:2014 Plastics. Method for artificial accelerated photoageing using medium pressure mercury vapour lamps
  • BS EN 12697-3:2005 Bituminous mixtures - Test methods for hot mix asphalt - Bitumen recovery - Rotary evaporator
  • BS EN 868-8:2009 Packaging for terminally sterilized medical devices - Re-usable sterilization containers for steam sterilizers conforming to EN 285: Requirements and test methods
  • BS EN 868-8:2018 Tracked Changes. Packaging for terminally sterilized medical devices. Re-usable sterilization containers for steam sterilizers conforming to EN 285. Requirements and test methods
  • BS EN IEC 62885-5:2018 Surface cleaning appliances - High pressure cleaners and steam cleaners for household and commercial use. Methods for measuring performance
  • BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
  • PD ISO/TS 17951-2:2016 Water quality. Determination of fluoride using flow analysis (FIA and CFA). Method using continuous flow analysis (CFA) with automated in-line distillation
  • BS EN 62863:2017 Methods of measuring performances of electric hair clippers or trimmers for household use
  • BS EN 15911:2010 Foodstuffs. Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection
  • PD ISO/TR 22582:2019 Cosmetics. Methods of extract evaporation and calculation of organic indexes. Supplemental information to use with ISO 16128-2
  • BS 2000-397:1995 Methods of test for petroleum and its products - Recovery of bitumen binders - Dichloromethane extraction rotary film evaporator method
  • BS 5766-21:2001 Methods for analysis of animal feeding stuffs. Determination of potassium and sodium contents. Methods using flame-emission spectrometry
  • BS EN ISO 16852:2010 Flame arresters. Performance requirements, test methods and limits for use
  • PD ISO/TS 17951-1:2016 Water quality. Determination of fluoride using flow analysis (FIA and CFA). Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation
  • PD ISO/TS 17379-2:2013 Water quality. Determination of selenium. Method using hydride generation atomic absorption spectrometry (HGAAS)
  • BS EN 868-8:1999 Packaging materials and systems for medical devices which are to be sterilized - Re-usable sterilization containers for steam sterilizers conforming to EN 285: Requirements and test methods
  • BS 6696:1986 Methods for use and testing of capacity of volumetric glassware
  • BS EN 60835-2-4:1993 Methods of measurement for equipment used in digital microwave radio transmission systems - Measurements on terrestrial radio-relay systems - Transmitter/receiver including modulator/demodulator
  • BS EN 3841-306:2005 Aerospace series - Circuit breakers - Test methods - Service life
  • BS EN 3841-306:2004 Circuit breakers-Test methods-Part 306:Service life
  • BS ISO 23907-2:2019 Sharps injury protection. Requirements and test methods - Reusable sharps containers
  • PD ISO/TS 17379-1:2013 Water quality. Determination of selenium. Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
  • BS EN ISO 19581:2020 Measurement of radioactivity. Gamma emitting radionuclides. Rapid screening method using scintillation detector gamma-ray spectrometry
  • BS 7334-5:1992 Measuring instruments for building construction. Methods for determining accuracy in use of optical plumbing instruments
  • BS 7334-1:1990 Measuring instruments for building construction. Methods for determining accuracy in use: theory
  • BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
  • BS EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
  • BS EN ISO 11348-3:2008+A1:2018 Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Method using freeze-dried bacteria

Professional Standard - Electron, How to use the evaporator

  • SJ/T 31352-1994 Integrity requirements and inspection and evaluation methods for refrigerator evaporator pipe benders
  • SJ/T 10431-1993 Humidity generators and humidity testing methods for humidity sensors

IT-UNI, How to use the evaporator

Professional Standard - Non-ferrous Metal, How to use the evaporator

  • YS/T 119.5-2008 Determination and calculation of heat balance of special equipments for alumina production.Part 5: Evaporator
  • YS/T 119.10-2005 Determination and calculation method of heat balance of special equipments for alumina production - Part 10: Plate falling-film evaporator system

YU-JUS, How to use the evaporator

  • JUS N.N6.373-1987 Radiocommunicaions .Methods of measurement for television transmitters and transposers employing insertino Test signals.Filters use in measurement
  • JUS N.N6.372-1987 Radiocommunications.Methods of measurement for television transmitters and transposers employing insertion test signals
  • JUS N.N6.230-1985 Radiocommunications. Equipment used in the mobi/e services. Receivers employing A3E, F3E or G3E emissions. Methods of measurement
  • JUS N.N6.250-1985 Radiocommunications. Equipment used in the mobi/e services. Receivers employing R3E, H3E or J3E emissions. Methods of measurement.
  • JUS N.N6.220-1985 Radiocommunications. Equipment used in the mobi/e services. Transmitters employing A3E, F3E or G3E emissions. Methods of measurement
  • JUS N.N6.231-1985 Radiocommunications. Equipment used in the mobile services. Receivers employing A3E, F3E orG3E emissions. Methods of measurement. Combining metvvorks

AENOR, How to use the evaporator

  • UNE-EN 60244-10:1996 METHODS OF MEASUREMENT FOR RADIO TRANSMITTERS. PART 10: METHODS OF MEASUREMENT FOR TELEVISION TRANSMITTERS AND TRANSPOSERS EMPLOYING INSERTION TEST SIGNALS.
  • UNE-EN 16472:2015 Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps
  • UNE-EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
  • UNE-EN 1076:2010 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
  • UNE-EN 61855:2005 Household electrical hair care appliances - Methods of measuring the performance
  • UNE-EN 868-8:2009 Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
  • UNE 55830:1984 SURFACE ACTIVE AGENTS. VOLATILE ORGANIC LIQUIDS TO BE USED AS RAW-MATERIALS IN DETERGENT FORMULATIONS. DETERMINATION OF DRY RESIDUE AFTER EVAPORATION ON A WATER BATH. GENERAL METHOD
  • UNE-EN 12697-3:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator
  • UNE-EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
  • UNE-EN 60350-1:2014 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
  • UNE-EN 60350-1:2014/A11:2015 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance

Professional Standard - Business, How to use the evaporator

  • SB/T 10796-2012 Laboratory test methods for remote mechanically ventilated evaporative refrigerant condensers

European Committee for Standardization (CEN), How to use the evaporator

  • EN ISO 10801:2010 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
  • EN 26246:1993 Petroleum Products - Motor Gasoline and Aviation Fuels - Determination of Existent Gum - Jet Evaporation Method (ISO 6246:1981) [Use: IP 131/99]
  • EN 16472:2014 Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps
  • EN 12697-3:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator
  • EN 15911:2010 Foodstuffs - Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection
  • EN ISO 16852:2010 Flame arresters - Performance requirements, test methods and limits for use
  • EN ISO 6246:1997 Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method (ISO 6246:1995)

VN-TCVN, How to use the evaporator

  • TCVN 6593-2010 Standard test method for gum content in fuels by jet evaporation
  • TCVN 1044-2011 Laboratory glassware - Volumetric instruments Methods for testing of capacity and for use

Danish Standards Foundation, How to use the evaporator

  • DS/EN ISO 10801:2011 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
  • DS/EN 1076:2010 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
  • DS/EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
  • DS/ISO 16110-2:2012 Hydrogen generators using fuel processing technologies - Part 2: Test methods for performance
  • DS/EN 61855:2003 Household electrical hair care appliances - Methods of measuring the performance
  • DS/ISO 759:1986 Volatile organic liquids for industrial use. Determination of dry residue after evaporation on water bath. General method
  • DS/EN 868-8:2009 Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
  • DS/EN 12697-3:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator
  • DS/EN ISO 16852:2010 Flame arresters - Performance requirements, test methods and limits for use
  • DS/EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
  • DS/EN 300676-1 V1.5.2:2011 Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 1:Technical characteristics and methods of measurement
  • DS/EN 300676-1 V1.5.1:2010 Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 1:Technical characteristics and methods of measurement
  • DS/EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
  • DS/EN 60350-1:2013 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance

TH-TISI, How to use the evaporator

  • TIS 1921-1999 Volatile organic liquids for industrial use.determination of dry residue after evaporation on a water bath.general method
  • TIS 1182.16-1998 Standard test method for petroleum and petroleum products.part 16: existent gum in fuels by jet evaporation

CZ-CSN, How to use the evaporator

  • CSN ISO 759:1993 Volatile organic liquids for industrial use - Determination of dry residue after evaporation on a water bath - General method
  • CSN 27 0140 Cast.5-1986 Cranes and elevating machines Approaches and operating positions

未注明发布机构, How to use the evaporator

  • DIN EN 12697-3:2005 Asphalt – Test method for hot asphalt – Part 3: Recovery of the binder: rotary evaporator
  • DIN EN 12697-3:2001 Bituminous mixtures — Test methods for hot mix asphalt — Part 3: Binder recovery: Rotary evaporator

Professional Standard - Medicine, How to use the evaporator

  • YY/T 0698.8-2009 Packaging materials for terminally sterilized medical devices—Part 8: Requirements and test methods for reusable sterilization containers for steam sterilizers
  • YY/T 1402-2016 Test method to demonstrate the suitability of the process challenge device(PCD)during steam sterilization

Lithuanian Standards Office , How to use the evaporator

  • LST EN 1076-2010 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
  • LST EN 838-2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
  • LST EN ISO 10801:2011 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method (ISO 10801:2010)
  • LST EN 12697-3-2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator
  • LST EN 60244-10-2002 Methods of measurement for radio transmitters. Part 10: Methods of measurement for television transmitters and transposers employing insertion test signals (IEC 60244-10:1986)
  • LST EN 868-8-2009 Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
  • LST EN 12697-3-2005 Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator
  • LST EN 61855-2003 Household electrical hair care appliances. Methods of measuring the performance (IEC 61855:2003)
  • LST EN 300 676-1 V1.5.1-2010 Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 1:Technical characteristics and methods of measurement
  • LST EN 300 676-1 V1.5.2-2011 Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 1:Technical characteristics and methods of measurement
  • LST EN 13528-3-2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance

Standard Association of Australia (SAA), How to use the evaporator

  • AS ISO 16110.2:2020 Hydrogen generators using fuel processing technologies, Part 2: Test methods for performance

KR-KS, How to use the evaporator

  • KS M ISO 759-2017 Volatile organic liquids for industrial use — Determination of dry residue after evaporation on water bath — General method
  • KS I ISO TS 7849-1-2019 Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 1: Survey method using a fixed radiation factor
  • KS L ISO 4787-2016 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
  • KS B ISO 4787-2007 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
  • KS C IEC 60350-1-2023 Household electric cooking appliances — Part 1: Ranges, ovens, steam ovens and grills — Methods for measuring performance

European Committee for Electrotechnical Standardization(CENELEC), How to use the evaporator

  • HD 236.8 S2-1987 Methods of Measurement for Radio Transmitters - Part 8: Vestigial- Sideband Demodulators for use in Conjunction with Transmitters or Transposers for Monochrome or Colour Television
  • HD 236.10 S1-1988 Methods of Measurement for Radio Transmitters - Part 10: Methods of Measurement for Television Transmitters and Transposers Employing Insertion Test Signals
  • EN 60350-1:2013 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
  • EN 60350-1:2016 Household electric cooking appliances - Part 1: Ranges@ ovens@ steam ovens and grills - Methods for measuring Performance
  • EN IEC 60350-1:2023 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
  • EN IEC 61855:2022 Household and similar use electrical hair care appliances - Methods for measuring the performance
  • EN 62863:2017 Methods of measuring performances of electric hair clippers or trimmers for household use

ES-AENOR, How to use the evaporator

Japanese Industrial Standards Committee (JISC), How to use the evaporator

  • JIS S 2075:2011 Measurement method of efficiency for domestic gas and oil water heater under standard usage mode
  • JIS A 1232:2023 Method for obtaining soil samples using the fixed piston sampler

CU-NC, How to use the evaporator

  • NC 90-04-22-1988 Standards System for Metrological Assurance. Glass-made Capacity Measures for General Use. Methods and Means of Verification

Group Standards of the People's Republic of China, How to use the evaporator

  • T/CSAE 121-2019 Test methods for evaporative emissions of automobile non-fuel-related parts and materials
  • T/CAAMTB 27-2021 Requirements and test methods for micro gas generator used in vehicles
  • T/ZMDS 20002-2017 Guidance on the use of AGILE practices in the development of medical device

International Telecommunication Union (ITU), How to use the evaporator

  • ITU-T G.996.1-2001 Test Procedures for Digital Subscriber Line (DSL) Transceivers Series G: Transmission Systems and Media Digital Systems and Networks Digital Sections and Digital Line System - Access Networks Study Group 15
  • ITU-T G.996.1 AMD 1-2003 Test procedures for digital subscriber line (DSL) transceivers Amendment 1: New Annex B SERIES G: TRANSMISSION SYSTEMS AND MEDIA DIGITAL SYSTEMS AND NETWORKS Digital sections and digital line system Access networks Study Group 15
  • ITU-R QUESTION 230/1-2004 Improved measurement methods for unwanted emissions of primary radars using magnetrons
  • ITU-R QUESTION 2301-2004 Improved measurement methods for unwanted emissions of primary radars using magnetrons

RO-ASRO, How to use the evaporator

  • STAS SR ISO 759:1994 Volatile organic liquids for industrial use - Determination of dry residue after evaporation on a water bath - General method
  • STAS 7396-1987 CARBURETTORS FOR MOTOR VEHICLES ENG1NES Testing methods
  • STAS SR ISO 9283+A1:1996 Manipulating industrial robots - Performance criteria and related test methods
  • STAS SR ISO 9283+A1/C1:1996 Manipulating industrial robots - Performance criteria and related test methods

PL-PKN, How to use the evaporator

  • PN E08227-02-1988 Household and similar electrical appliances Appliances for hair curling Methods for measuring the performance

CEN - European Committee for Standardization, How to use the evaporator

  • EN 12697-3:2005 Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator
  • EN 12697-3:2000 Bituminous Mixtures - Test Methods for Hot Mix Asphalt - Part 3: Bitumen Recovery: Rotary Evaporator
  • EN 12697-3:2013/PRA1:2017 Bituminous mixtures - Test methods - Part 3: Bitumen recovery: Rotary evaporator

IN-BIS, How to use the evaporator

Institute of Electrical and Electronics Engineers (IEEE), How to use the evaporator

  • IEEE 982.2-1988 Guide for the use of IEEE standard dictionary of measures to produce reliable software

ETSI - European Telecommunications Standards Institute, How to use the evaporator

  • TR 102 780-2009 Methods for Testing and Specification (MTS); Security; Guide to the use of methods in development of ETSI security standards (V1.1.1)
  • ETR 008-1990 Network Aspects (NA); the Method for the Characterisation of the Machine-Machine Interfaces Utilised by a Telecommunications Management Network (TMN)

Professional Standard - Machinery, How to use the evaporator

AT-ON, How to use the evaporator

  • ONR CEN/TS 16931-7-2021 Electronic invoicing - Part 7: Methodology for the development and use of EN 16931-1 compliant structured Core Invoice Usage Specifications (CEN/TS 16931-7:2020)
  • ONORM L 5233-1998 Agricultural vehicles and seif propelled machines used in mountainous regions - Parking brake - Test methods

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, How to use the evaporator

  • QUESTION 230/1-2004 Improved measurement methods for unwanted emissions of primary radars using magnetrons

PT-IPQ, How to use the evaporator

  • NP 3064-1988 Fire protection Portable fire extinguishers use

International Electrotechnical Commission (IEC), How to use the evaporator

  • IEC 62885-5:2018 Surface cleaning appliances - Part 5: High pressure cleaners and steam cleaners for household and commercial use - Methods for measuring performance
  • IEC 61855:2022 Household and similar use electrical hair care appliances - Methods for measuring the performance
  • IEC 60350-1 INT 1:2021 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
  • IEC 60350-1:2021 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
  • IEC 60350-1:2011 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
  • IEC 60350-1:2023 RLV Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
  • IEC 60350-1:2023 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance

CENELEC - European Committee for Electrotechnical Standardization, How to use the evaporator

  • EN IEC 62885-5:2018 Surface cleaning appliances - Part 5: High pressure cleaners and steam cleaners for household and commercial use - Methods for measuring performance

Professional Standard - Light Industry, How to use the evaporator

  • QB/T 4691-2014 Technical requirements and test methods for household and similar portable steam sauna

HU-MSZT, How to use the evaporator

国家市场监督管理总局、中国国家标准化管理委员会, How to use the evaporator

  • GB/T 12810-2021 Laboratory glassware—Capacity methods testing and use of volumetric instruments
  • GB/T 38051.1-2021 Household electric cooking appliances—Part 1:Ranges, ovens, steam ovens and grills—Methods for measuring performance

NZ-SNZ, How to use the evaporator

  • AS/NZS 4776.1.2:2008 Liquid-chilling packages using the vapour compression cycle Part 1.2: Method of rating and testing for performance-Testing
  • AS/NZS 4776.1.1:2008 Liquid-chilling packages using the vapour compression cycle Part 1.1: Method of rating and testing for performance-Rating

IX-EU/EC, How to use the evaporator





Copyright ©2007-2023 ANTPEDIA, All Rights Reserved