ZH
RU
ES

Analysis of Calibration Curves

Analysis of Calibration Curves, Total:499 items.

In the international standard classification, Analysis of Calibration Curves involves: Analytical chemistry, Water quality, Fibre optic communications, Medical sciences and health care facilities in general, Lubricants, industrial oils and related products, Thermodynamics and temperature measurements, Measurement of volume, mass, density, viscosity, Optics and optical measurements, Vocabularies, Test conditions and procedures in general, Electricity. Magnetism. Electrical and magnetic measurements, Vibrations, shock and vibration measurements, Petroleum products in general, Sensory analysis, Plastics, Particle size analysis. Sieving, Air quality, Linear and angular measurements, Organic chemicals, Radiation measurements, Hydraulic fluids, Metrology and measurement in general, Edible oils and fats. Oilseeds, Products of the chemical industry, Nuclear energy engineering, Quality, Wood, sawlogs and sawn timber, Products of the textile industry, Special measuring equipment for use in telecommunications, Measurement of fluid flow, Optical equipment, Rubber, Milk and milk products, Testing of metals, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Tyres, Environmental protection, Coals.

German Institute for Standardization, Analysis of Calibration Curves

DIN 55912-2 Bb.2:1999 Pigments - Titanium dioxide pigments - Methods of analysis; establishing a calibration graph using the X-ray fluorescence analysis
DIN ISO 16592:2015 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method (ISO 16592:2012)
DIN ISO 8466-2:2004-06 Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics - Part 2: Calibration strategy for non-linear second-order calibration functions (ISO 8466-2:2001)
DIN 38402-51:1986 German standard methods for the examination of water, waste water and sludge; general information (group A); calibration of analytical methods, evaluation of analytical results and linear calibration functions used to determine the performance characteris
DIN 38402-51:2017-05 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 51: Calibration of analytical methods - Linear calibration (A 51)
DIN 51418-2:2015 X-ray spectrometry - X-ray emission and X-ray fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
DIN 51418-2:1996 X-ray spectrometry - X-ray emission- and X-ray fluorescense analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
DIN ISO 8466-2:2004 Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics - Part 2: Calibration strategy for non-linear second-order calibration functions (ISO 8466-2:2001)
DIN EN ISO 6141:2020-05 Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015 + Amd. 1:2020); German version EN ISO 6141:2015 + A1:2020
DIN 6146:2018 Gas analysis - Preparation of calibration gas mixtures - Manometric method
DIN EN 62129 Berichtigung 1:2008 Calibration of optical spectrum analyzers (IEC 62129:2006); German version EN 62129:2006, Corrigendum to DIN EN 62129:2007-01; German version CENELEC-Cor. :2006 to EN 62129:2006
DIN 6146:2018-10 Gas analysis - Preparation of calibration gas mixtures - Manometric method
DIN ISO 15472:2020-05 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales (ISO 15472:2010); Text in English
DIN ISO 11843-2:2006 Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000; text in German, English)
DIN EN ISO 6142-1:2015-12 Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015); German version EN ISO 6142-1:2015
DIN EN ISO 16664:2017-09 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2017); German version EN ISO 16664:2017
DIN EN ISO 6144:2006-11 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003); German version EN ISO 6144:2006
DIN ISO 15472:2020 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales (ISO 15472:2010); Text in English
DIN 38402-51:2017 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 51: Calibration of analytical methods - Linear calibration (A 51)
DIN 38402-51:2015 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 51: Calibration of analytical methods - Linear calibration (A 51)
DIN 51418-2:2015-03 X-ray spectrometry - X-ray emission and X-ray fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
DIN 12836-3:1975 Apparatus for dairy analyses; milk butyrometer 0 to 10 %, calibrated
DIN EN ISO 6143:2006-11 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001); German version EN ISO 6143:2006
DIN ISO 11843-5:2010-08 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases (ISO 11843-5:2008); Text in German and English
DIN IEC 61453:2008 Nuclear Instrumentation - Scintillation gamma ray detector systems for the assay of radionuclides - Calibration and functional checks (IEC 61453:2007)
DIN EN 61745:2018-06 End-face image analysis procedure for the calibration of optical fibre geometry test sets (IEC 61745:2017); German version EN 61745:2017
DIN ISO 11843-2 Berichtigung 1:2008-06 Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000), Corrigenda to DIN ISO 11843-2:2006-06 (ISO 11843-2:2000/Cor. 1:2007; text in German, English)
DIN ISO 8466-2 Berichtigung 1:2006 Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics - Part 2: Calibration strategy for non-linear second-order calibration functions (ISO 8466-2:2001), Corrigenda to DIN ISO 8466-2:2004-06
DIN 12836-2:1966 Apparatus for dairy analyses; milk butyrometer 0 to 4%, calibrated
DIN 53019-2:2001-02 Viscosimetry - Measurement of viscosities and flow curves by means of rotation viscosimeters - Part 2: Viscosimeter calibration and determination of the uncertainty of measurement
DIN EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003); English version of DIN EN ISO 6144:2006-11
DIN 51418-2 Bb.1:2000 X-ray spectrometry - X-Ray Emission- and X-ray Fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results; additional information and examples of calculation
DIN 53019-2:2001 Viscosimetry - Measurement of viscosities and flow curves by means of rotation viscosimeters - Part 2: Viscosimeter calibration and determination of the uncertainty of measurement
DIN EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009); German version EN ISO 6145-5:2010

International Organization for Standardization (ISO), Analysis of Calibration Curves

ISO 16592:2006 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
ISO 16592:2012 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
ISO 8466-1:2021 Water quality — Calibration and evaluation of analytical methods — Part 1: Linear calibration function
ISO 8466-2:1993 Water quality; calibration and evaluation of analytical methods and estimation of performance characteristics; part 2: calibration strategy for non-linear second order calibration functions
ISO 8466-1:1990 Water quality; calibration and evaluation of analytical methods and estimation of performance characteristics; part 1: statistical evaluation of the linear calibration function
ISO 15472:2010 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
ISO 15472:2001 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
ISO 8466-2:2001 Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics - Part 2: Calibration strategy for non-linear second-order calibration functions
ISO 13299:2003 Sensory analysis - Methodology - General guidance for establishing a sensory profile
ISO 13299:2016 Sensory analysis - Methodology - General guidance for establishing a sensory profile
ISO 6146:1979 Gas analysis — Preparation of calibration gas mixtures — Manometric method
ISO 15337:2009 Ambient air - Gas phase titration - Calibration of analysers for ozone
ISO 6349:1979 Gas analysis — Preparation of calibration gas mixtures — Permeation method
ISO/DIS 17973:2023 Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibration of energy scales for elemental analysis
ISO 10519:2015/DAmd 1:2023 Rapeseed — Determination of chlorophyll content — Spectrometric method — Amendment 1: Preparation of the calibration curve to determine the k factor
ISO 9276-3:2008 Representation of results of particle size analysis - Part 3: Adjustment of an experimental curve to a reference model
ISO 6145-5:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
ISO/FDIS 6142-2:2023 Gas analysis — Preparation of calibration gas mixtures — Part 2: Gravimetric method for Class II mixtures
ISO 6142-2:2023 Gas analysis — Preparation of calibration gas mixtures — Part 2: Gravimetric method for Class II mixtures
ISO/CD 17973 Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibration of energy scales for elemental analysis
ISO 17973:2016 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
ISO 17973:2002 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
ISO 6142-1:2015 Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures
ISO 29301:2017 Microbeam analysis - Analytical electron microscopy - Methods for calibrating image magnification by using reference materials with periodic structures
ISO 7395:1984 Gas analysis — Preparation of calibration gas mixtures — Mass dynamic method
ISO 29301:2010 Microbeam analysis - Analytical transmission electron microscopy - Methods for calibrating image magnification by using reference materials having periodic structures
ISO/CD 6143 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
ISO/DIS 6143:2023 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
ISO 24639:2022 Microbeam analysis — Analytical electron microscopy — Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
ISO 6142:1981/Add 1:1983 Gas analysis — Preparation of calibration gas mixtures — Weighing methods — Addendum 1
ISO 16063-45:2017 Methods for the calibration of vibration and shock transducers - Part 45: In-situ calibration of transducers with built in calibration coil
ISO 7066-1:1989 Assessment of uncertainty in the calibration and use of flow measurement devices; part 1: linear calibration relationships
ISO 11843-5:2008 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
ISO 12963:2017/Amd 1:2020 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration - Amendment 1: Correction to Formula 5
ISO 7066-2:1988 Assessment of uncertainty in the calibration and use of flow measurements devices; part 2: non-linear calibration relationships
ISO 17974:2002 Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis
ISO/DIS 6142-2 Gas analysis — Preparation of calibration gas mixtures — Part 2: Gravimetric method for Class II mixtures
ISO 6133:1981 Rubber and plastics; Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO/CD 5861 Surface chemical analysis — X-ray photoelectron spectroscopy — Method of intensity calibration for quartz-crystal monochromated Al Kα XPS instruments
ISO/DIS 5861:2023 Surface chemical analysis — X-ray photoelectron spectroscopy — Method of intensity calibration for quartz-crystal monochromated Al Kα XPS instruments
ISO/TS 14167:2003 Gas analysis - General quality assurance aspects in the use of calibration gas mixtures - Guidelines
ISO/FDIS 29301:2023 Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures
ISO 29301:2023 Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures
ISO 13084:2011 Surface chemical analysis - Secondary-ion mass spectrometry - Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
ISO 19318:2004 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
ISO 19318:2021 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
ISO 11843-5:2008/Amd 1:2017 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases; Amendment 1

Korean Agency for Technology and Standards (KATS), Analysis of Calibration Curves

KS D ISO 16592:2011 Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
KS D ISO 16592-2011(2016) Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
KS D ISO 16592-2011(2021) Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
KS I ISO 8466-2-2007(2012) Water quality－Calibration and evaluation of analytical methods and estimation of performance characteristics－Part 2：Calibration strategy for non-linear second－order calibration functions
KS I ISO 8466-1-2008(2013) Water quality－Calibration and evaluation of analytical methods and estimation of performance characteristics (Statistical evaluation of the linear calibration function)
KS I ISO 8466-1:2008 Water quality-Calibration and evaluation of analytical methods and estimation of performance characteristics (Statistical evaluation of the linear calibration function)
KS I ISO 8466-2:2007 Water quality-Calibration and evaluation of analytical methods and estimation of performance characteristics-Part 2:Calibration strategy for non-linear second-order calibration functions
KS Q ISO 13299:2007 Sensory analysis－Methodology－General guidance for establishing a sensory profile
KS I ISO 6142-2015(2020) Gas analysis－Preparation of calibration gas mixtures－Gravimetric method
KS I ISO 15337:2017 Ambient air－Gas phase titration－Calibration of analysers for ozone
KS I ISO 15337:2022 Ambient air — Gas phase titration — Calibration of analysers for ozone
KS A ISO GUIDE 32-2005(2015) Calibration in analytical chemistry and use of certified reference materials
KS I ISO 6144-2015(2020) Gas analysis－Preparation of calibration gas mixtures－Static volumetric method
KS I ISO 6145-5:2010 Gas analysis-Preparation of calibraion gas mixtures using dynamic volumetric methods-Part 5:Capillary calibration devices
KS I ISO 6145-5:2015 Gas analysis－Preparation of calibraion gas mixtures using dynamic volumetric methods－Part 5：Capillary calibration devices
KS D ISO 17973-2011(2021) Surface chemical analysis－Medium-resolution Auger electron spectrometers－Calibration of energy scales for elemental analysis
KS D ISO 17973-2011(2016) Surface chemical analysis－Medium-resolution Auger electron spectrometers－Calibration of energy scales for elemental analysis
KS D ISO 15472:2003 Surface chemical analysis-X-ray photoelectron spectrometers-Calibration of energy scales
KS C IEC 61745-2001(2016) End－face image analysis procedure for the calibration of optical fibre geometry test setsthe calibration of optical fibre geometry test sets
KS I ISO 16664-2015(2020) Gas analysis－Handling of calibration gases and gas mixtures－Guidelines
KS I ISO 8466-2014(2019) Water quality ― Calibration and evaluation of analytical methods and estimation of performance characteristics
KS D ISO 17973:2011 Surface chemical analysis－Medium-resolution Auger electron spectrometers－Calibration of energy scales for elemental analysis
KS I ISO 8466:2014 Water quality ― Calibration and evaluation of analytical methods and estimation of performance characteristics
KS B ISO TR 7066-1-2004(2014) Assessment of uncertainty in calibration and use of flow measurement devices－Part 1：Linear calibration relationships
KS B 5261-2003(2018)
KS B ISO 7066-2:2020 Assessment of uncertainty in the calibration and use of flow measurement devices — Part 2: Non-linear calibration relationships
KS K ISO 7211-3:2021 Textiles — Woven fabrics — Construction — Methods of analysis —Part 3: Determination of crimp of yarn in fabric
KS D ISO 17974-2011(2021) Surface chemical analysis－High-resolution Auger electron spectrometers－Calibration of energy scales for elemental and chemical-state analysis
KS D ISO 17974-2011(2016) Surface chemical analysis－High-resolution Auger electron spectrometers－Calibration of energy scales for elemental and chemical-state analysis
KS Q ISO 11843-5:2012 Capability of detection-Part 5:Methodology in the linear and non-linear calibration cases
KS Q ISO 11843-5:2018 Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
KS Q ISO 11843-5-2023 Detection Capabilities Part 5: Methodology in Linear and Nonlinear Calibration Vessels
KS Q ISO 11843-2-2009(2019) Capability of detection－Part 2：Methodology in the linear calibration case
KS D ISO 17974:2011 Surface chemical analysis－High-resolution Auger electron spectrometers－Calibration of energy scales for elemental and chemical-state analysis
KS I ISO TS 14167:2015 Gas analysis－General quality assurance aspects in the use of calibration gas mixtures－Guidelines
KS I ISO 6143-2015(2020) Gas analysis－Comparison methods for determining and checking the composition of calibration gas mixtures
KS I ISO 14167:2010 Gas analysis-General quality assurance aspects in the use of calibration gas mixtures-Guidelines
KS I ISO TS 14167-2015(2020) Gas analysis－General quality assurance aspects in the use of calibration gas mixtures－Guidelines
KS D ISO 19318:2005 Surface chemical analysis－X-ray photoelectron spectroscopy－Reporting of methods used for charge control and charge correction
KS B 5530-2003(2018)

British Standards Institution (BSI), Analysis of Calibration Curves

BS ISO 16592:2012 Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
BS ISO 8466-1:2021 Water quality. Calibration and evaluation of analytical methods - Linear calibration function
20/30408800 DC BS ISO 8466-1. Water quality. Calibration and evaluation of analytical methods. Part 1. Linear calibration function
BS ISO 15472:2010 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
18/30355730 DC BS EN 62737. Calibration and Validation of Process Analysers
BS EN ISO 13299:2003 Sensory analysis. Methodology. General guidance for establishing a sensory profile
BS EN ISO 13299:2010 Sensory analysis - Methodology - General guidance for establishing a sensory profile
BS ISO 9276-3:2008 Representation of results of particle size analysis - Adjustment of an experimental curve to a reference model
BS EN ISO 6141:2015+A1:2020 Gas analysis. Contents of certificates for calibration gas mixtures
BS ISO 15337:2009 Ambient air - Gas phase titration - Calibration of analysers for ozone
BS ISO 6142-1:2015+A1:2020 Gas analysis. Preparation of calibration gas mixtures - Gravimetric method for Class I mixtures
BS EN ISO 6142:2001 Gas analysis. Preparation of calibration gas mixtures. Gravimetric method
BS EN ISO 6142:2006 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method
BS EN ISO 6145-5:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Capillary calibration devices
BS ISO 24639:2022 Microbeam analysis. Analytical electron microscopy. Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
BS EN 61745:2017 End-face image analysis procedure for the calibration of optical fibre geometry test sets - Part 1: Introduction and roadmap for standardization
BS EN ISO 16664:2004 Gas analysis. Handling of calibration gases and gas mixtures. Guidelines
BS EN ISO 16664:2008 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines
BS ISO 7211-3:2002 Textiles - Woven fabrics - Construction - Methods of analysis - Determination of crimp of yarn in fabric
BS ISO 7211-3:1984 Textiles. Woven fabrics. Construction. Methods of analysis. Determination of crimp of yarn in fabric
BS EN ISO 6142-1:2015 Tracked Changes. Gas analysis. Preparation of calibration gas mixtures. Gravimetric method for Class I mixtures
BS ISO 17973:2003 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
21/30404763 DC BS ISO 24639. Microbeam analysis. Analytical electron microscopy. Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
BS EN ISO 6145-10:2002 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Permeation method
BS EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Permeation method
22/30439290 DC BS ISO 6142-2. Gas analysis. Preparation of calibration gas mixtures - Part 2. Gravimetric method for Class II mixtures
BS EN ISO 6144:2003 Gas analysis. Preparation of calibration gas mixtures. Static volumetric method
BS EN ISO 6141:2006 Gas analysis - Requirements for certificates for calibration gases and gas mixtures
BS EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method
BS ISO 23812:2009 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth calibration for silicon using multiple delta-layer reference materials
20/30419854 DC BS ISO 6142-1 AMD1. Gas analysis. Preparation of calibration gas mixtures. Part 1. Gravimetric method for Class I mixtures
BS ISO 17973:2016 Tracked Changes. Surface chemical analysis. Medium-resolution Auger electron spectrometers. Calibration of energy scales for elemental analysis
BS ISO 16063-45:2017 Methods for the calibration of vibration and shock transducers. Part 45: In-situ calibration of transducers with built in calibration coil
BS 684 Sec.1.13:1976 Methods of analysis of fats and fatty oils. Physical methods. Determination of cooling curve
BS ISO 17974:2002 Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis
BS ISO 29301:2017 Microbeam analysis. Analytical electron microscopy. Methods for calibrating image magnification by using reference materials with periodic structures
BS ISO 19318:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
BS ISO 14167:2018 Gas analysis. General quality aspects and metrological traceability of calibration gas mixtures
BS ISO 16700:2016 Tracked Changes. Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification

Association Francaise de Normalisation, Analysis of Calibration Curves

NF X21-007:2008 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steel using a calibration curve method.
NF X20-201:2006 Gas analysis - Requirements for certificates for calibration gases and gas mixtures.
NF X21-055:2006 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales.
NF V03-110:2010 Analyse des produits agricoles et alimentaires - Protocole de caractérisation en vue de la validation d'une méthode d'analyse quantitative par construction du profil d'exactitude
NF V09-007:2010 Sensory analysis - Methodology - General guidance for establishing a sensory profile.
NF X20-201*NF EN ISO 6141:2015 Gas analysis - Contents of certificates for calibration gas mixtures
NF EN ISO 6141:2015 Analyse des gaz - Prescriptions relatives aux certificats des mélanges de gaz pour étalonnage
NF X20-202:1979 Gas analysis. Preparation of calibration gas mixtures. Gravimetric methods.
NF X20-208:1979 GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. SATURATION METHOD.
NF X20-209:1979 Gas analysis. Preparation of calibration gas mixtures. Permeation method.
NF X20-207:1982 Gas analysis. Determination of composition of calibration gas mixtures. Comparison methods.
NF T75-122:1982 ESSENTIAL OILS. OILS OF CITRUS. DETERMINATION OF CD VALUE BY ULTRAVIOLET SPECTROPHOTOMETRIC ANALYSIS.
NF X20-206:1979 GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. MANOMETRIC METHOD.
NF ISO 17973:2006 Analyse chimique des surfaces - Spectromètres d'électrons Auger à résolution moyenne - Étalonnage des échelles d'énergie pour l'analyse élémentaire
NF EN ISO 6142-1:2015 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage - Partie 1 : méthode gravimétrique pour les mélanges de Classe I
NF X20-211:1983 Gas analysis. Preparation of calibration gas mixtures. Mass dynamic method.
NF X20-103*NF EN ISO 16664:2017 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines
NF C93-846-1*NF EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1 : optical spectrum analyzers
NF X21-054*NF ISO 17973:2006 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis.
NF X10-108*NF ISO 7066-2:1988 Assessment of uncertainty in the calibration and use of flow measurement devices. Part 2 : non-linear calibration relationships.
NF X20-220:1981 Analysis of gases. Checking of calibration gas mixtures by a comparison method.
NF EN ISO 6144:2006 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage - Méthode volumétrique statique
NF ISO 7066-2:1988 Évaluation de l'incertitude dans l'étalonnage et l'utilisation des appareils de mesure du débit - Partie 2 : relations d'étalonnage non linéaires.
NF G07-154-3*NF ISO 7211-3:2017 Textiles- Woven fabrics- Construction- Methods of analysis- Part 3 : determination of crimp of yarn in fabric
NF C93-809*NF EN 61745:2018 End-face image analysis procedure for the calibration of optical fibre geometry test sets
NF X06-048-5*NF ISO 11843-5:2008 Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases
NF EN ISO 6143:2006 Analyse des gaz - Méthodes comparatives pour la détermination et la vérification de la composition des mélanges de gaz pour étalonnage
NF X11-636:1985 Size analysis-Representation of particle size distributions - Adjustment of an experimental cumulative curve to a reference model - Case of sieving
NF EN 62129-1:2016 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 1 : analyseurs de spectre optique
NF ISO 17974:2009 Analyse chimique des surfaces - Spectromètres d'électrons Auger à haute résolution - Étalonnage des échelles d'énergie pour l'analyse élémentaire et de l'état chimique
NF X20-542-1*NF EN ISO 6142-1:2015 Gas analysis - Preparation of calibration gas mixtures - Part 1 : gravimetric method for class I mixtures
NF X20-105*NF ISO 12963:2017 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
NF X20-204:1974 Gas analysis. Method for the dynamic preparation of gas mixtures for calibration by proportioning piston pumps.
NF X20-106*NF ISO 14167:2019 Gas analysis - General quality aspects and metrological traceability of calibration gas mixtures
NF X21-067*NF ISO 17974:2009 Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis.
NF X21-066*NF ISO 23812:2009 Surface chemical analysis - Secondary ion mass spectrometry - Method for depth calibration for silicon using multiple delta-layer reference materials
NF X06-048-5/A1*NF ISO 11843-5/A1:2017 Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases - Amendment 1

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Analysis of Calibration Curves

GB/T 15247-2008 Microbeam analysis.Electron probe microanalysis.Guidelines for determining the carbon content of steels using calibration curve method
GB/T 36063-2018 Nanotechnologies—Raman shift standard curve for spectrometer calibration
GB/T 22571-2008 Surface chemical analysis.X-ray photoelectron spectrometers.Calibration of energy scales
GB/T 10628-2008 Gas analysis.Comparison methods for determining and checking the composition of calibration gas mixtures
GB/T 27762-2011 Standard test method for mass scale calibration of thermogravimetric analyzers
GB/T 5274-1985 Gas analysis--Preparation of calibration gas mixtures--Weighing methods
GB/T 5275-2005 Gas analysis-Preparation of calibration gas mixtures-Permeation method
GB/T 14070-1993 Gas analysis.Preparation of calibration gas mixtures.Manometric method
GB/T 5274-2008 Gas analysis.Preparation of calibration gas mixtures.Gravimetric method
GB/T 5275-1985 Gas analysis--Preparation of calibration gas mixtures--Permeation methods
GB/T 10248-1988 Gas analysis--Preparation of calibration gas mixtures--Static volumetric methods
GB/T 10248-2005 Gas analysis.Preparation of calibration gas mixtures.Static volumetric methods
GB/T 29820.1-2013 Assessment of uncertainty in calibration and use of flow measurement devices.Part 1:Linear calibration relationships
GB/T 12833-1991 Rubber and plastics--Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
GB/T 15000.9-2004 Directives for the work of reference materials(9)-Calibration in analytical chemistry and use of certified reference materials
GB/T 12833-2006 Rubber and plastics. Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
GB/T 15247-1994 Electron probe quantitative analysis method of carbon in carbon steel and low alloy steel--Sensitivity curve method (detection limit method)
GB/T 25185-2010 Surface chemical analysis.X-ray photoelectron spectroscopy.Reporting of methods used for charge control and charge correction

National Metrological Technical Specifications of the People's Republic of China, Analysis of Calibration Curves

JJF 1494-2014 Calibration Specification for Network Cable Analyzers
JJF 1079-2002 Calibration Specification for Cathode Ray Tube(CRT)Color Analyzers
JJF 1565-2016 Calibration specification for heavy metal water quality online analyzer
JJF 1907-2021 Calibration Specification for Ambient Air online Monitoring Instruments
JJF 1133-2005 Calibration Specification of Gold Gauge Utilizing X-ray Fluorescence Spectrometry

YU-JUS, Analysis of Calibration Curves

JUS U.M1.042-1987 Determination of ultrasonic pulse velocity and calibration curve
JUS H.F8.404-1990 Gas analysis. Preparat ion of calibration gas mixtures. Meighing methods
JUS H.F8.401-1990 Gas analysis. Preparation of calibration gas mixtures. Pnrmeaticm metbod
JUS H.F8.403-1990 Gas analysis. Preparat ion of callbration gas mixtures. Manometric method
JUS H.F8.402-1990 Gas analysis. Deteralnation of composition of calibration gas mixtures. Comparlstm methods
JUS B.G8.056-1982 Methods of analysh ofiron ore?. Experimental methods for checking theprecision of sampling

Danish Standards Foundation, Analysis of Calibration Curves

DS/EN 62129/Corr. 1:2007 Calibration of optical spectrum analyzers
DS/EN 62129:2006 Calibration of optical spectrum analyzers
DS/ISO 8466-2:2007 Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics - Part 2: Calibration strategy for non-linear second-order calibration functions
DS/ISO 8466-1:2007 Water quality - Calibration and evaluation of analystical methods and estimation of performance characteristics - Part 1: Statistical evaluation of the linear calibration function
DS/EN ISO 6142:2007 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method
DS/EN ISO 16664:2008 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines
DS/EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method
DS/EN ISO 6141:2006 Gas analysis - Requirements for certificates for calibration gases and gas mixtures
DS/EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
DS/ISO 11843-5:2008 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
DS/ISO 11843-2/Corr. 1:2007 Capability of detection - Part 2: Methodology in the linear calibration case
DS/ISO 11843-2:2003 Capability of detection - Part 2: Methodology in the linear calibration case
DS/ISO 6133:1981 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

Japanese Industrial Standards Committee (JISC), Analysis of Calibration Curves

JIS C 6192:2008 Calibration of optical spectrum analyzers
JIS K 0145:2002 Surface chemical analysis -- X-ray photoelectron spectrometers -- Calibration of energy scales
JIS K 0055:1986 General rules for calibration method of gas analyzer
JIS K 0055:2002 General rules for calibration method of gas analyzer
JIS Z 8754:1988 Mass-spectrometer-type leak-detector calibration
JIS Q 0032:1998 Calibration in analytical chemistry and use of certified reference materials
JIS Z 8462-2:2003 Capability of detection -- Part 2: Methodology in the linear calibration case
JIS K 0165:2011 Surface chemical analysis -- Medium-resolution Auger electron spectrometers -- Calibration of energy scales for elemental analysis
JIS Z 8462-5:2011 Capability of detection -- Part 5: Methodology in the linear and non-linear calibration cases
JIS K 0166:2011 Surface chemical analysis -- High-resolution Auger electron spectrometers -- Calibration of energy scales for elemental and chemical-state analysis
JIS K 6274:2006 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
JIS K 6274:2018 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

API - American Petroleum Institute, Analysis of Calibration Curves

API REPORT 85-55-1986 Earthquake Analysis for LRFD Calibration

Professional Standard - Hygiene , Analysis of Calibration Curves

WS/T 347-2011 Guideline for the calibration of blood cell assays
WS 347-2011 Calibration Guide for Blood Cell Analysis

National Health Commission of the People's Republic of China, Analysis of Calibration Curves

WST 347:2011 Calibration Guide for Blood Cell Analysis

American Society for Testing and Materials (ASTM), Analysis of Calibration Curves

ASTM D4178-82(1999) Standard Practice for Calibrating Moisture Analyzers
ASTM E1361-90(1999) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM E1361-02(2021) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM E1582-93 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM D4178-82(2017) Standard Practice for Calibrating Moisture Analyzers
ASTM D4178-82(2012) Standard Practice for Calibrating Moisture Analyzers
ASTM D4178-23 Standard Practice for Calibrating Moisture Analyzers
ASTM E2744-16e1 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E542-01(2007) Standard Practice for Calibration of Laboratory Volumetric Apparatus
ASTM E2744-10 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2744-21 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2744-10(2015) Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2744-16 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E1582-17 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E2206-06 Standard Test Method for Force Calibration Of Thermomechnical Analyzers
ASTM E2038-99 Standard Test Method for Temperature Calibration of Dielectric Analyzers
ASTM E2206-11 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E2206-21 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E2038-99(2004) Standard Test Method for Temperature Calibration of Dielectric Analyzers
ASTM E2040-19 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2206-11(2015) Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E1582-21 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E1361-02 Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM E1361-02(2007) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM E1361-02(2014)e1 Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
ASTM E2206-02 Standard Method for Force Calibration Of Thermomechnical Analyzers
ASTM D6200-01(2007) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-00 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM E305-07 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
ASTM D6200-21 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01(2017) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM E305-13 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
ASTM D6200-01(2012) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM E1363-03 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1363-18 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1860-13(2018) Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
ASTM E1860-13 Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
ASTM E1363-16 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1363-13 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1363-08 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1363-23 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1860-23 Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
ASTM E1363-97e1 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1867-11 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E2040-99 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-03 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1867-97 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1867-01 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E2113-02 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E2040-08 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1867-18 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1867-22 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1867-16 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E2040-08(2014) Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2113-09 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E305-21 Standard Practice for Establishing and Controlling Spark Atomic Emission Spectrochemical Analytical Curves
ASTM E1867-06 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E2113-18 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E1867-13 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E2113-13 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM D7360-16 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration
ASTM E1867-12 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E2113-23 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E967-97 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E181-98(2003) Standard Test Methods for Detector Calibration and Analysis of Radionuclides
ASTM E181-98 Standard Test Methods for Detector Calibration and Analysis of Radionuclides
ASTM E1860-97a Standard Test Method for Elapsed Time Calibration Thermal Analyzers
ASTM E1860-07 Standard Test Method for Elapsed Time Calibration Thermal Analyzers
ASTM E1860-02 Standard Test Method for Elapsed Time Calibration Thermal Analyzers
ASTM D6549-06(2021) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM E181-10 Standard Test Methods for Detector Calibration and Analysis of Radionuclides
ASTM E2254-18 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E181-17 Standard Test Methods for Detector Calibration and Analysis of Radionuclides
ASTM E2254-08 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2254-23 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM D8511/D8511M-23 Standard Guide for Design and Analysis of Local Buckling and Crippling Test Specimens
ASTM D7578-10 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
ASTM D6549-01 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6549-00 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM E2113-04 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E2113-00 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM D7578-18 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7578-20 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7578-15 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
ASTM D6782-05 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM D6782-04 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM D6782-19 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM D8392-22 Standard Practice for Calibration and Verification of Direct Imaging Analyzers Used for Particle Size and Shape Analysis of Catalytic Materials
ASTM D7360-11 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration
ASTM C1156-95e1 Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
ASTM C1156-18 Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
ASTM D6549-06 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6549-06(2015) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM D7578-10e1 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
ASTM D6549-06(2011) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D7646-10(2014) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2254-13 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2254-11 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2254-03 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM D7646-10 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D6782-13 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E1790-00 Standard Practice for Near Infrared Qualitative Analysis
ASTM E1790-04 Standard Practice for Near Infrared Qualitative Analysis
ASTM D6482-99 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-01 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-06(2011) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-06(2016) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2551-18 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E3301-22 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers Using Thermal Lag
ASTM E2551-20 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E2105-00(2005) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
ASTM E2105-00 Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
ASTM D6482-06 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-21 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D7646-23 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM C1156-03 Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
ASTM C1156-03(2011) Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
ASTM D7646-10(2019) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D7343-18 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7343-20 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7343-12(2017) Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM F1016-07(2020) Standard Practice for Linear Tire Treadwear Data Analysis
ASTM E1790-04(2010) Standard Practice for Near Infrared Qualitative Analysis
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2108-05 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
ASTM E3163-18 Standard Guide for Selection and Application of Analytical Methods and Procedures Used during Sediment Corrective Action
ASTM D6091-03 Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error
ASTM D6543-00(2012) Standard Guide to the Evaluation of Measurements Made by On-Line Coal Analyzers
ASTM D6543-00(2012)e1 Standard Guide to the Evaluation of Measurements Made by Online Coal Analyzers
ASTM D6543-14b Standard Guide to the Evaluation of Measurements Made by Online Coal Analyzers
ASTM D7343-12 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM E2056-00 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E2108-00 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
ASTM E2056-04(2010) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E2056-04(2016) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM D6091-97 Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error

Lithuanian Standards Office , Analysis of Calibration Curves

LST EN 62129-2006 Calibration of optical spectrum analyzers (IEC 62129:2006)
LST EN 62129-2006/AC-2007 Calibration of optical spectrum analyzers (IEC 62129:2006)
LST EN ISO 6142:2007 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method (ISO 6142:2001)
LST EN ISO 6144:2007 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003)
LST EN ISO 6141:2007 Gas analysis - Requirements for certificates for calibration gases and gas mixtures (ISO 6141:2000)
LST EN ISO 16664:2008 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2004)
LST EN ISO 6143:2007 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
LST ISO 7066-2:2002 Assessment of uncertainty in calibration and use of flow measurement devices. Part 2: Non-linear calibration relationships (idt ISO 7066-2:1988)

US-FCR, Analysis of Calibration Curves

FCR COE ETL 1110-2-537-1997 UNCERTAINTY ESTIMATES FOR NONANALYTIC FREQUENCY CURVES
FCR COE RPMAS 46880-1978 CALIBRATION OF FLUE STACK ANALYZERS MARCH 1978

IEC - International Electrotechnical Commission, Analysis of Calibration Curves

PAS 62129-2004 Calibration of optical spectrum analyzers (Edition 1.0;: 2006)

VN-TCVN, Analysis of Calibration Curves

TCVN 6661-1-2000 Water quality.Calibration and evaluation of analytical methods and estimation of performance characteristics.Part 1: Statistical evaluation of the linear calibration functions
TCVN 6661-2-2009 Water quality.Calibration and evaluation of analytical methods and estimation of performance charactenstcs.Part 2.Calibration strategy for non-linear second-order calibration functions
TCVN 5093-1990 Textiles.Woven fabrics construction.Methods of analysis determination of crimp of yarn in fabrics

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Analysis of Calibration Curves

GB/T 22571-2017 Surface chemical analysis—X-ray photoelectron spectrometers—Calibration of energy scales
GB/T 35861-2018 Gas analysis—General quality assurance aspects in the use of calibration gas mixtures—Guidelines

Standard Association of Australia （SAA）, Analysis of Calibration Curves

AS ISO 15472:2006 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
AS 2883:2000(R2016) Analysis of metals - Procedures for the setting up, calibration and standardization of atomic emission spectrometers using arc/spark discharge
AS 2883:2000 Analysis of metals - Procedures for the setting up, calibration and standardization of atomic emission spectrometers using arc/spark discharge

Professional Standard - Nuclear Industry, Analysis of Calibration Curves

EJ/T 1146-2018 Gamma-ray scintillation detector system calibration and testing for nuclide analysis
EJ/T 1110-2000 Standard guide for establishing calibration for a measurement method used to analyze nuclear fuel cycle materials

KR-KS, Analysis of Calibration Curves

KS D ISO 15472-2003(2023)
KS I ISO 15337-2022 Ambient air — Gas phase titration — Calibration of analysers for ozone
KS I ISO 15337-2017 Ambient air－Gas phase titration－Calibration of analysers for ozone
KS B ISO 7066-2-2020 Assessment of uncertainty in the calibration and use of flow measurement devices — Part 2: Non-linear calibration relationships
KS K ISO 7211-3-2021 Textiles — Woven fabrics — Construction — Methods of analysis —Part 3: Determination of crimp of yarn in fabric
KS Q ISO 11843-5-2018(2023) Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
KS Q ISO 11843-5-2018 Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases

ZA-SANS, Analysis of Calibration Curves

SANS 8466-2:2002 Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics Part 2: Calibration strategy for non-linear second-order calibration functions
SANS 604:2007 Calibration in analytical chemistry and use of certified reference materials
SANS 11843-2:2009 Capability of detection Part 2: Methodology in the linear calibration case
SANS 8466-1:2002 Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics Part 1: Statistical evaluation of the linear calibration function
SANS 11843-5:2009 Capability of detection Part 5: Methodology in the linear and non-linear calibration cases

SE-SIS, Analysis of Calibration Curves

SIS SMS 2027-1975 Dust separating. Standard curves for dust

AENOR, Analysis of Calibration Curves

UNE 82132:2005 IN Calibration in analytical chemistry and use of certified reference materials
UNE-ISO 15337:2010 Ambient air -- Gas phase titration -- Calibration of analysers for ozone
UNE 82206-1:1996 ASSESSMENT OF UNCERTAINTY IN THE CALIBRATION AND USE OF FLOW MEASUREMENT DEVICES. PART 1: LINEAR CALIBRATION RELATIONSHIPS.
UNE 40600-3:1996 TEXTILES. WOVEN FABRICS. CONSTRUCTION. METHODS OF ANALYSIS. PART 3: DETERMINATION OF CRIMP OF YARN IN FABRIC.
UNE-EN ISO 16664:2008 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2004)
UNE-EN ISO 6144:2007 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003)
UNE-EN ISO 6143:2007 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)

Association of German Mechanical Engineers, Analysis of Calibration Curves

VDI/VDE/DGQ/DKD 2622 Blatt 11-2003 Calibration of measurement equipments for electrical quantities - Spectrum analyzers

European Committee for Standardization (CEN), Analysis of Calibration Curves

EN ISO 13299:2016 Sensory analysis - Methodology - General guidance for establishing a sensory profile (ISO 13299:2016)
EN ISO 13299:2010 Sensory analysis - Methodology - General guidance for establishing a sensory profile
EN ISO 6142:2006 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method
EN ISO 6145-5:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009)
EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003)
EN ISO 6141:2006 Gas analysis - Requirements for certificates for calibration gases and gas mixtures

RU-GOST R, Analysis of Calibration Curves

GOST R ISO 6142-2008 Gas analysis. Preparation of calibration gas mixtures. Gravimetric method
GOST R ISO 15337-2013 Ambient air. Gas phase titration. Calibration of analysers for ozone
GOST R ISO 6144-2008 Gas analysis. Preparation of calibration gas mixtures. Static volumetric method
GOST R ISO 11843-5-2012 Statistical methods. Capability of detection. Part 5. Methodology in the linear and non-linear calibration cases

ES-UNE, Analysis of Calibration Curves

UNE-EN ISO 6141:2015 Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015)
UNE-EN ISO 6142-1:2016 Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015)
UNE-EN ISO 16664:2018 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2017)
UNE-EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers (Endorsed by AENOR in July of 2016.)
UNE-EN 61745:2017 End-face image analysis procedure for the calibration of optical fibre geometry test sets (Endorsed by Asociación Española de Normalización in December of 2017.)

BE-NBN, Analysis of Calibration Curves

NBN T 97-109-1984 Gas analysis - Determination of composition of calibration gas mixtures -Comparison methods
NBN T 97-110-1983 Gas analysis - Preparation of calibration gas mixtures - Static volumetric methods
NBN X 07-001-1987 Classification and càlibration of material testing machines -Machines for compression, bending and tensile tests
NBN-ISO 7066-1:1990 Schatting van de onnauwkeurigheden bij net ijken en het gebruik van debietmeetinstrumenten - Deel 1 : Lineaire ijkingsverhoudingen

CZ-CSN, Analysis of Calibration Curves

CSN ISO 6349:1993 Gas analysis. Preparation of calibration gas mixtures. Permeation method
CSN ISO 7066-2:1994 Assessment of uncertainty in the calibration and use of flow measurement devices Part 2: Non-linear calibration relationships
CSN ISO 6145-1:1994 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods
CSN 44 1312-1993 Solid mineral fuels. Calibration and control of determination of ash content by radiation analysers

ES-AENOR, Analysis of Calibration Curves

UNE 53-612-1984

Compressed Gas Association (U.S.), Analysis of Calibration Curves

CGA M-8-2011 Guideline for the manufacturer of calibration gas standards used to analyze medical gases

U.S. Air Force, Analysis of Calibration Curves

AIR FORCE MIL-STD-1564 A CHG NOTICE 2-1997 PROCEDURE FOR CALIBRATION AND ANALYSIS OF TRACE CONTAMINANTS IN AVIATOR'S BREATHING OXYGEN BY INFRARED SPECTROSCOPY

Natural Gas Processor's Association (NGPA), Analysis of Calibration Curves

GPA RR-96-1986 Vapor Liquid Equilibrium and Condensing Curves in the Vicinity of the Critical Point for a Typical Gas Condensate (Mass Spec Analysis)

American Welding Society (AWS), Analysis of Calibration Curves

WRC 364:1991 Part 1: New Design Curves For Torispherical Heads; Part 2: Elastic-Plastic Analysis Of Shells Of Revolution Under Axisymmetric Loading

国家市场监督管理总局、中国国家标准化管理委员会, Analysis of Calibration Curves

GB/T 37180-2018 Gas analysis—Handling of calibration gases and gas mixtures—Guidelines
GB/T 33260.2-2018 Capability of detection—Part 2: Methodology in the linear calibration case

International Electrotechnical Commission (IEC), Analysis of Calibration Curves

IEC 61145:1992 Calibration and usage of ionization chamber systems for assay of radionuclides
IEC 61453:2007 Nuclear instrumentation - Scintillation gamma ray detector systems for the assay of radionuclides - Calibration and routine tests

未注明发布机构, Analysis of Calibration Curves

BS EN ISO 6144:2006(2007) Gas analysis — Preparation of calibration gas mixtures — Static volumetric method
BS ISO 17974:2002(2010) Surface chemical analysis — High - resolution Auger electron spectrometers — Calibration of energy scales for elemental and chemical - state analysis
BS EN ISO 6143:2006(2007) Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
BS ISO 11843-2:2000(2008) Capability of detection — Part 2 : Methodology in the linear calibration case
BS 684-1.13:1976(2011) Methods of analysis of Fats and fatty oils — Part 1 : Physical methods — Section 1.13 : Determination of cooling curve

American Gear Manufacturers Association, Analysis of Calibration Curves

AGMA 2010-A94-1994 Measuring Instrument Calibration - Part I, Involute Measurement
AGMA 2110-A94-1994 Measuring Instrument Calibration - Part I, Involute Measurement (Metric)

European Committee for Electrotechnical Standardization（CENELEC）, Analysis of Calibration Curves

EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers
EN 61745:2017 End-face image analysis procedure for the calibration of optical fibre geometry test sets

Indonesia Standards, Analysis of Calibration Curves

SNI ISO 7211-3:2010 Textiles - Woven fabrics - Construction - Methods of analysis - Part 3: Determination of crimp of yarn in fabric

Professional Standard - Machinery, Analysis of Calibration Curves

JB 6852-1993 Vehicle emission analyzer - Requirements for mixed gas storage vessel for calibration

WRC - Welding Research Council, Analysis of Calibration Curves

BULLETIN 364-1991 NEW DESIGN CURVES FOR TORISPHERICAL HEADS ; ELASTIC-PLASTIC ANALYSIS OF SHELLS OF REVOLUTION UNDER AXISYMMETRIC LOADING

American National Standards Institute （ANSI), Analysis of Calibration Curves

ANSI/TIA-455-225-2002 FOTP225 - End Face Image Analysis Procedure for the Calibration of Optical Fibre Geometry Test Sets
ANSI/TIA/EIA 455-225-2002 FOTP225 - End Face Image Analysis Procedure for the Calibration of Optical Fibre Geometry Test Sets
ANSI N42.12-1994 Calibration and Usage of Thallium-Activated Sodium Iodide Detector Systems for Assay of Radionuclides
ANSI/IEEE N42.12:1994 Calibration and usage of thallium-activated sodium iodide detector systems for assay of radionuclides

GOSTR, Analysis of Calibration Curves

GOST 8.662-2018 State system for ensuring the uniformity of measurements. Dissolved hydrogen analyzers. Calibration methods

EEMUA - Engineering Equipment and Materials Users Association, Analysis of Calibration Curves

PUB NO 175-1995 EEMUA Code of Practice for Calibration and Checking Process Analysers (Formerly IP Code 340)

AASHTO - American Association of State Highway and Transportation Officials, Analysis of Calibration Curves

T 272-1986 Standard Method of Test for Family of Curves - One-Point Method (HM-22; PART IIB)

ESDU - Engineering Sciences Data Unit, Analysis of Calibration Curves

ESDU 84007 A-1991 The treatment of calibrations of total air temperature probes for use in flight-test analysis work.

The American Road & Transportation Builders Association, Analysis of Calibration Curves

AASHTO T 272-1986 Standard Method of Test for Family of Curves - One-Point Method HM-22; PART IIB R(2000)

(U.S.) Telecommunications Industries Association , Analysis of Calibration Curves

TIA/EIA-455-225-2002 FOTP-225 IEC-61745 End Face Image Analysis Procedure for the Calibration of Optical Fibre Geometry Test Sets
TIA-455-225-2015 FOTP-225 IEC-61745 End-Face Image Analysis Procedure for the Calibration of Optical Fibre Geometry Test Sets