ZH
RU
ES

Exhaust gas detection box

Exhaust gas detection box, Total:500 items.

In the international standard classification, Exhaust gas detection box involves: Air quality, Road vehicle systems, Wood-based panels, Analytical chemistry, Geology. Meteorology. Hydrology, Freight distribution of goods, Radiation protection, Radiation measurements, Burners. Boilers, Medical sciences and health care facilities in general, Electrical equipment for working in special conditions, Motor cycles and mopeds, Wastes, Vocabularies, Cases. Boxes. Crates, Road vehicles in general, Quality, Fuels, Diagnostic, maintenance and test equipment, Internal combustion engines for road vehicles, Environmental protection, Internal combustion engines, Water quality, Nuclear energy engineering, Electricity. Magnetism. Electrical and magnetic measurements, Food products in general, Ceramics, Services, Soil quality. Pedology, Gas and steam turbines. Steam engines, Machine tools, Solar energy engineering, Non-destructive testing, Postal services, Springs, Lifting equipment, Pipeline components and pipelines, Products of the chemical industry, Kitchen equipment, Microbiology, Wood technology processes, Thermodynamics and temperature measurements, Measurement of force, weight and pressure, Cereals, pulses and derived products, Laboratory medicine, Inorganic chemicals, Industrial automation systems, Packaging materials and accessories, Mining and quarrying, Alarm and warning systems, Paper and board, Medical equipment, Occupational safety. Industrial hygiene, Installations in buildings, Equipment for petroleum and natural gas industries, Terminology (principles and coordination), Metrology and measurement in general, Fluid storage devices, Farming and forestry.

Society of Automotive Engineers (SAE), Exhaust gas detection box

SAE J900-1995 Crankcase Emission Control Test Code
SAE J254-1993 Instrumentation and Techniques for Exhaust Gas Emissions measurement
SAE J254-2011 Instrumentation and Techniques for Exhaust Gas Emissions measurement
SAE J1094-2011 Constant Volume Sampler System for Exhaust Emissions measurement

Professional Standard - Agriculture, Exhaust gas detection box

LY/T 1612-2023 1m³ climate chamber for formaldehyde detection
HJ 1287-2023 Determination of Blackness of Exhaust Gas from Stationary Pollution Sources by Ringelmann Telescope Method

Professional Standard - Forestry, Exhaust gas detection box

LY/T 1981-2011 Testing apparatus for formaldehyde emission by the gas analysis method
LY/T 1612-2004 The climate chamber for determination of formaldehyde emission
LY/T 1980-2011 Determination device of the emission of volatile organic compounds and formaldehyde

Taiwan Provincial Standard of the People's Republic of China, Exhaust gas detection box

CNS 12688-1990 Methods for Determination of Benzene in Exhaust Gas
CNS 12686-1990 Methods for Determination of Phenols in Exhaust Gas
CNS 12687-1990 Methods for Determination of Pyridine in Exhaust Gas
CNS 12825-1990 Methods of Test for Carbon Disulfide in Exhaust Gas
CNS 12824-1990 Methods of Test for Carbon Monoxide in Exhaust Gas
CNS 3797-1975 Method for Measuring Water Content in Stack Gas
CNS 4049-1976 Composition Analysis for Waste Gases of Combustion Equipments
CNS 3798-1975 Location for Measurement of Dust Content in Stack Gas.
CNS 8842-1993 Method of Test for Potassium in Industrial Waste Water(Flame Emission Spectrophotometric Method)
CNS 8843-1993 Method of Test for Sodium in Industrial Waste Water(Flame Emission Spectrophotometric Method)
CNS 4050-1976 Method of Measuring Velocity and Flow Rate of Stack Gas

Professional Standard - Meteorology, Exhaust gas detection box

QX/T 15-2002 YE1-1 Calibration equipment for pressure instrument
QX/T 126-2011 Test method of calibration device for aneroid barometer(barograph)
QX/T 92-2008 Test specification of calibration equipment for humidity instrument
QX/T 163-2012 Test method of temperature calibration device for aneroid barometer(barograph)

Guangdong Provincial Standard of the People's Republic of China, Exhaust gas detection box

DB44/T 2075-2017 Full box detector

SE-SIS, Exhaust gas detection box

SIS SS IEC 761:1988 Nuclear instrumentation — Equipment for continuously monitoring radioactivity in gaseous effluents
SIS SS-IEC 761:1992 Nuclear instrumentation — Equipment for continuously monitoring radioactivity in gaseous effluents
SIS SS IEC 729:1986 Nuclear instrumentation - Multiple controllers in a CAMAC crate
SIS SS IEC 524:1982 Electrical measuring instruments — Direct current resistive volt ratio boxes
SIS SS IEC 552:1986 Nuclear instrumentation - CAMAC- Organization of multi-crate systems -Specification of the branch-highway and CAMAC crate controller type A 1

Group Standards of the People's Republic of China, Exhaust gas detection box

T/QGCML 1831-2023
T/NAIA 0136-2022 Coal Chemical Industry Wastewater Testing Guide
T/HAS 113-2022 Agricultural product inspection and testing laboratory waste management specification
T/CITS 0003-2022 Requirements for evaluating forerunner standard — Inspection and testing services of refrigerators
T/CIC 401-2021 High temperature non-dispersive infrared absorption method for detection of inorganic harmful gas factors in waste gas from fixed pollution sources in metallurgical industry
T/GDCKCJH 066-2022 Performance requirements and test methods for ozone aging test chambers
T/CWIAS 0001.1-2022 Detecting instrument for overload and unbalanced load of freight container— Part 1: Platform type
T/GDCKCJH 050-2021 Performance requirements and test method for carbon dioxide incubator
T/GDCKCJH 067-2022 Performance requirements and testing methods for constant temperature oscillation incubator
T/CITS 0004-2023 Technical requirements and testing methods for high-performance medical refrigerator
T/SSESB 1-2020 Stationary source emission—Determination of humidity —Resistance and Capacitance Method
T/SDCA 006-2021 Management specifiaction of waste liquid for quality and safety inspection of agricultural products
T/HNAEPI 002-2021 Technical requirement and test method of on-line thallium monitor for pollutant discharge wastewater
T/SBX 025-2019 Fixed Gas Detector
T/CATSI 02010-2022 Method for Helium leak?detection of gas cylinders

Professional Standard - Commodity Inspection, Exhaust gas detection box

SN/T 2751-2011 Animal and Plant Quarantine Regulations for Carrying Waste Raw Materials in Entry Containers
SN/T 3744-2013 Rules for detection of the residual toxic gas in entry-exit containers
SN/T 2837-2011 Regulations for animal and plant quarantine and pest removal treatment of waste raw materials carried in entry containers
SN/T 3058-2011 Determination of organotin compounds in paper box imported

American National Standards Institute （ANSI), Exhaust gas detection box

ANSI N42.18-2004 Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in Effluents
ANSI/SAE J254-1993 Instrumentation and Techniques for Exhaust Gas Emissions Measurement
ANSI/UL 1484-2008 Residential Gas Detectors

Hebei Provincial Standard of the People's Republic of China, Exhaust gas detection box

DB13/T 2583-2017 Test method for exhaust gas emission from civil clean combustion stoves
DB13/T 5147-2019 Technical Requirements for Detection of Ozone Release from Organic Waste Gas Purification Devices
DB13/T 5185-2020 Agricultural product quality inspection and testing laboratory waste management specification
DB13/T 5468-2021 Gravimetric Method for Determining Humidity of Exhaust Gas from Stationary Pollution Sources
DB13/T 2518-2017 Specifications for inspection and testing of combustible gas and toxic gas detection and alarm systems in industrial enterprises
DB13/T 2376-2016 Determination of particulate matter in exhaust gas from stationary pollution sources β-ray method

German Institute for Standardization, Exhaust gas detection box

DIN 51402-1:1986 Testing of flue gases of oil burning systems; visual and photometric determination of the smoke number
DIN 51402-2:1979 Determination of flue gases of oil burning systems; method by fluid means for detection of oil derivatives
DIN EN ISO 18854:2015-08 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015); German version EN ISO 18854:2015
DIN EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
DIN 30694-4:1990 Built-in appliances for LPG in vehicles; hotplates, ovens, grills, refrigerators and freezers; requirements and testing
DIN EN 15308:2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection; English version of DIN EN 15308:2008-05
DIN 38408-3:1993 German standard methods for the examination of water, waste water and sludge; gaseous components (group G); determination of ozone (G 3)
DIN 38407-2:1993 German standard methods for the determination of water, waste water and sludge; jointly determinable substances (group F); determination of low volatile halogenated hydrocarbons by gas chromatography (F 2)
DIN EN ISO 20485:2018-05 Non-destructive testing - Leak testing - Tracer gas method (ISO 20485:2017); German version EN ISO 20485:2018
DIN 38408-5:1990 German standard methods for the examination of water, waste water and sludge; gaseous components (group G); determination of chlorine dioxide (G 5)
DIN 38408-5:1990-06 German standard methods for the examination of water, waste water and sludge; gaseous components (group G); determination of chlorine dioxide (G 5)
DIN 54191:2017-10 Non-destructive testing - Thermographic testing of electric installations
DIN EN 1593:1999-11 Non-destructive testing - Leak testing - Bubble emission techniques; German version EN 1593:1999
DIN 38408-23:1987 German standard methods for the examination of water, waste water and sludge; gaseous constituents (group G); determination of oxygen saturation index (G 23)
DIN 38412-37:1999-04 German standard methods for the examination of water, waste water and sludge - Bio-assays (group L) - Part 37: Determination of the inhibitory effect of water on the growth of bacteria (Photobacterium phosphoreum cell multiplication inhibition test) (L...
DIN 54603:1981 Testing of paper, boxboard and paper board; Determination of glyoxal content
DIN EN 15308:2016 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection; German version EN 15308:2016
DIN 38408-3:2011-04 German standard methods for the examination of water, waste water and sludge - Gaseous components (group G) - Part 3: Determination of ozone (G 3)
DIN EN ISO 10855-3:2018-11 Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO 10855-3:2018); German version EN ISO 10855-3:2018
DIN 51853:2011 Testing of fuel gases - Sampling
DIN EN ISO 20485:2018 Non-destructive testing - Leak testing - Tracer gas method (ISO 20485:2017)
DIN EN ISO 20486:2018-05 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017); German version EN ISO 20486:2018
DIN EN 15527:2008 Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS); English version of DIN EN 15527:2008-09
DIN 38408-3:2011 German standard methods for the examination of water, waste water and sludge - Gaseous components (group G) - Part 3: Determination of ozone (G 3)
DIN 30694-4:1990-03 Built-in appliances for LPG in vehicles; hotplates, ovens, grills, refrigerators and freezers; requirements and testing / Note: Applies in conjunction with DIN 3360-2 (1984-09), DIN 3360-5, DIN 3370, DIN EN 30 (1979-12).
DIN EN ISO 20475:2021-03 Gas cylinders - Cylinder bundles - Periodic inspection and testing (ISO 20475:2018); German version EN ISO 20475:2020

国家质量监督检验检疫总局, Exhaust gas detection box

SN/T 4791-2017 Air tightness testing standards for fumigation treatment of entry and exit containers
SN/T 4905.1-2017 Methods for detecting toxic gases in entry and exit containers Part 1: Benzene compounds

Professional Standard - Machinery, Exhaust gas detection box

JB/T 11188-2011 Power distribution boxes for explosive gas atmospheres
JB/T 10555-2006 Nondesturctive testing.Ultrasonic testing of aivs
JB/T 10555-2013 Nondestructive testing.Ultrasonic testing of aivs

HU-MSZT, Exhaust gas detection box

British Standards Institution (BSI), Exhaust gas detection box

BS ISO 19449:2015 Mopeds. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS ISO 17479:2013+A1:2020 Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS ISO 11042-1:1996 Gas turbines. Exhaust gas emission. Measurement and evaluation
BS ISO 8178-1:2017 Reciprocating internal combustion engines. Exhaust emission measurement. Test-bed measurement systems of gaseous and particulate emissions
BS ISO 3929:2003 Road vehicles. Measurement methods for exhaust gas emissions during inspection or maintenance
BS ISO 11042-2:1996 Gas turbines. Exhaust gas emission. Automated emission monitoring
19/30392436 DC BS ISO 17479 AMD1. Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS ISO 8178-2:2021 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
BS EN 15308:2016 Characterization of waste. Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection
BS ISO 20048-2:2023 Solid biofuels. Determination of off-gassing and oxygen depletion characteristics - Operational method for screening of carbon monoxide off-gassing
BS ISO 11042-1:1997 Gas turbines - Exhaust gas emission - Measurement and evaluation
21/30426008 DC BS ISO 8178-2. Reciprocating internal combustion engines. Exhaust emission measurement. Part 2. Measurement of gaseous and particulate exhaust emissions under field conditions
BS PAS 111:2012 Specification for the requirements and test methods for processing waste wood
BS EN 15308:2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
BS 5343-2:1991 Gas detector tubes - Specification for long term gas detector tubes
BS ISO 8178-3:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Definitions and methods of measurement of exhaust gas smoke under steady state conditions
BS ISO 8178-3:1994 Reciprocating internal combustion engines - Exhaust emission measurement - Definitions and methods of measurement of exhaust gas smoke under steady state conditions
PD ISO/TS 24522:2019 Event detection process: Guidelines for water and wastewater utilities
BS ISO 8178-9:2019 Reciprocating internal combustion engines. Exhaust emission measurement - Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
BS ISO 8178-5:2015 Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
BS ISO 8178-5:2009 Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
BS ISO 8178-5:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Test fuels
BS EN ISO 10855-3:2018 Offshore containers and associated lifting sets. Periodic inspection, examination and testing
BS ISO 8178-6:2018 Reciprocating internal combustion engines. Exhaust emission measurement - Report of measuring results and test
BS ISO 16247:2004 Road vehicles. Detection of exhaust systems leaks. Helium test method and detection device specification
BS EN ISO 20475:2020 Gas cylinders. Cylinder bundles. Periodic inspection and testing
BS ISO 8178-5:2021 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
BS ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
BS ISO 24557:2009 Pulses - Determination of moisture content - Air-oven method

Professional Standard - Chemical Industry, Exhaust gas detection box

HG/T 5721～5722-2020 Rubber Ozone Resistance Aging Chamber and Rubber Air Tightness Detector (2020)

ZA-SANS, Exhaust gas detection box

SANS 95-5:2009 Mobile waste containers Part 5: Performance requirements and test methods

International Organization for Standardization (ISO), Exhaust gas detection box

ISO 19449:2015 Mopeds — Measurement methods for gaseous exhaust emissions during inspection or maintenance
ISO 3929:2003 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
ISO 3929:1995 Road vehicles - Measurement methods for exhaust gas emmissions during inspection or maintenance
ISO 3930:2000 Instruments for measuring vehicle exhaust emissions
ISO 8178-2:2021 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
ISO/TS 24522:2019 Event detection process: Guidelines for water and wastewater utilities
ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
ISO 8178-1:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement systems of gaseous and particulate emissions
ISO 11042-1:1996 Gas turbines - Exhaust gas emission - Part 1: Measurement and evaluation
ISO 20485:2017 Non-destructive testing - Leak testing - Tracer gas method
ISO 11042-2:1996 Gas turbines - Exhaust gas emission - Part 2: Automated emission monitoring
ISO 11599:1997 Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste
ISO 14396:2002 Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178
ISO 5220:1981 Air distribution and air diffusion; Aerodynamic testing and rating of constant and variable dual or single duct boxes and single duct units
ISO 10855-3:2018 Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing
ISO/CD 10855-3:2023 Offshore containers and associated lifting sets — Part 3: Periodic inspection, examination and testing
ISO 20475:2018 Gas cylinders — Cylinder bundles — Periodic inspection and testing
ISO/TR 4011:1976 Road vehicles; Apparatus for measurement of the opacity of exhaust gas from diesel engines

Danish Standards Foundation, Exhaust gas detection box

DS/ISO 17479:2013 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
DS/ISO 10 368:1993 Freight thermal containers - Remote condition monitoring
DS/EN 15308:2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
DS/EN 13185/A1:2004 Non-destructive testing - Leak testing - Tracer gas method
DS/EN 16167:2012 Sludge, treated biowaste and soil - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)
DS/EN 1593/A1:2004 Non-destructive testing - Leak testing - Bubble emission techniques
DS/EN 1593:2002 Non-destructive testing - Leak testing - Bubble emission techniques
DS/EN 15527:2008 Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS)
DS/EN 12079-3:2006 Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Exhaust gas detection box

GB/T 19788-2015 Inspection procedure for honeycomb fibreboard boxes
GB/T 19788-2005 Inspection code for honeycomb fibreboard boxes
GB/T 33043-2016 Standard test method for determining formaldehyde concentrations in air and emission rates from wood products using a large chamber
GB 7230-1987 Gas detector tube units
GB/T 7230-2008 Gas detector tube measurement system

Korean Agency for Technology and Standards (KATS), Exhaust gas detection box

KS M 2300-2005 Methods for determination of oxygen in flue gas
KS M 2304-2006 Method for determination of phosgene in exhaust gas
KS M 2304-2014 Method for determination of phosgene in exhaust gas
KS R 1046-2001(2011) Road vehicles?Measurement methods for exhaust gasemissions during inspection or maintenance
KS R ISO 3929-2006(2021) Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
KS R ISO 3929-2006(2016) Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
KS R ISO 8178-1:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
KS M 2302-2006 Methods for determination of arsenic in flue gas
KS M 2402-2007 Petroleum products－Gasoline－Determination of lead content
KS M 2402-1982 Petroleum products－Gasoline－Determination of lead content
KS R ISO 3929:2006 Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
KS M 0029-1993 Methods for Determination of Mercaptan in Exhaust Gas
KS R ISO 8178-2:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
KS R ISO 3832:2002 Passenger cars-Luggage compartments-Method of measuring reference volume
KS R ISO 3832:2013 Passenger cars-Luggage compartments-Method of measuring reference volume
KS M 2104-2005(2010) Methods for determination of hydrogen cyanide in exhaust gas
KS B 4044-2007(2012) Test code for performance and accuracy of single spindle automatic lathes(sliding headstock type)
KS M 2303-2006 Methods for determination of carbon disulfide in exhaust gas
KS M 0030-1993 Methods for determination of phenols in exhaust gas
KS M 2303-2014 Methods for determination of carbon disulfide in exhaust gas
KS M 0030-1987 Methods for determination of phenols in exhaust gas
KS B ISO 11042-1:2015 Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
KS B ISO 11042-1:2005 Gas turbines-Exhaust gas emission-Part 1:Measurement and evaluation
KS B ISO 11042-1-2015(2020) Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
KS R ISO 8178-3-2007(2022) Reciprocating internal combustion engines－Exhaust emission measurement－Part 3：Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
KS B ISO 11042-2-2015(2020) Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
KS B ISO 11042-2:2005 Gas turbines-Exhaust gas emission-Part 2:Automated emission monitoring
KS B ISO 11042-2:2015 Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
KS I 2215-2011 Measuring method for particle-size distribution of dusts in flue gas
KS I 2218-2009 Detector tube type gas measuring instruments
KS A ISO 11599:2012 Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste
KS R ISO 14396:2006 Reciprocating internal combustion engines-Determination and method for the measurement of engine power-Additional requirements for exhaust emission tests in accordance with ISO 8178
KS B 5345-1998(2018) Forced air circulation oven type thermal accerelated aging testers

Association Francaise de Normalisation, Exhaust gas detection box

NF X30-500:2011 Packaging for medicinal care waste - Boxes and small collectors for perforating waste - Specifications and tests.
NF R10-018*NF ISO 3929:2004 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
NF R10-018:1996 Road vehicles. Measurement procedures for exhaust gas emissions during inspection or maintenance.
NF J95-067*NF EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measutrement - Test-bed measurement of gaseous and particulate exhaust emissions
NF T90-201:1979 Essais des eaux - Effluents aqueux des raffineries de pétrole - Échantillonnage
NF R10-019*NF ISO 3930:2001 Instruments for measuring vehicle exhaust emissions
NF E37-211-2*NF ISO 8178-2:2022 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2 : measurement of gaseous and particulate exhaust emissions under field conditions
NF R10-025-3:2016 Véhicules routiers - Mesurage de l'opacité des gaz d'échappement émis par les moteurs à allumage par compression (diesel) - Partie 3 : procédure de contrôle des polluants visibles (opacité) des gaz d'échappement
NF E37-504-2:1999 Gas turbines - Exhaust gas emission - Part 2 : automated emission monitoring.
NF R10-019:1996 Road vehicles. Measurement equipment for exhaust gas emissions during inspection or maintenance. Technical specifications.
NF E37-211-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
NF E37-211-1:1997 Reciprocating internal combustion engines. Exhaust emission measurement. Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
NF E52-402:2010 Cranes - Wire ropes - Care and maintenance, inspection and discard.
NF E37-504-1:1999 Gas turbines - Exhaust gas emission - Part 1 : measurement and evaluation.
NF E37-504-1*NF ISO 11042-1:2016 Gaz turbines - Exhaust gas emission - Part 1 : measurement and evaluation
NF H96-116:1998 Conteneurs roulants à déchets - Code d'essai pour le mesurage du bruit aérien émis par les conteneurs roulants à déchets.
NF X43-103:1996 Air quality. Olfactometric measurements. Measurement of the odour of a gazeous effluent. Supra-threshold methods.
NF X30-453:2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste, by using capillary gas chromatography with electron capture or mass spectrometric detection.
NF X43-002:1983 Air pollution. Flue gases. Determination of the smoke spot number (bacharach method).
NF E37-504-2*NF ISO 11042-2:2016 Gaz turbines - Exhaust gas emission - Part 2 : automated emission monitoring
NF ISO 8178-3:2019 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 3 : définitions et méthodes de mesure de la fumée des gaz d'échappement dans des conditions stabilisées
NF ISO 8178-9:2019 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 9 : cycles et procédures d'essai pour le mesurage au banc d'essai des émissions de fumées de gaz d'échappement des moteurs alternatifs à combust...
NF A09-492*NF EN ISO 20485:2018 Non-destructive testing - Leak testing - Tracer gas method
NF EN ISO 20485:2018 Essais non destructifs - Contrôle d'étanchéité - Méthode par gaz traceur
NF E37-211-5:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5 : test fuels.
NF M87-101-3*NF EN ISO 10855-3:2018 Offshore containers and associated lifting sets - Part 3 : periodic inspection, examination and testing
NF EN ISO 10855-3:2018 Conteneurs offshore et dispositifs de levage associés - Partie 3 : inspection périodique, examen et test
NF ISO 16247:2006 Véhicules routiers - Détection des fuites du dispositif d'échappement - Méthode d'essai à l'hélium et spécification du dispositif de détection
NF EN ISO 20486:2018 Essais non destructifs - Contrôle d'étanchéité - Étalonnage des fuites de référence des gaz
NF E37-211-9*NF ISO 8178-9:2019 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9 : test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
NF C23-596*NF EN 50402:2017 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of gas detection systems
NF EN 50402:2017 Matériel électrique pour la détection et la mesure des gaz ou vapeurs combustibles ou toxiques ou de l'oxygène - Exigences relatives à la sécurité fonctionnelle des systèmes de détection de gaz
NF E29-694*NF EN ISO 14246:2022 Gas cylinders - Cylinder valves - Manufacturing tests and examinations
NF EN ISO 20475:2020 Bouteilles à gaz - Cadres de bouteilles - Contrôles et essais périodiques
NF ISO 8178-5:2021 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 5 : carburants d'essai
NF EN 1593/A1:2004 Essais non destructifs - Contrôle d'étanchéité - Contrôle à la bulle
NF EN 1593:1999 Essais non destructifs - Contrôle d'étanchéité - Contrôle à la bulle
NF R10-014:2002 Véhicules routiers - Procédure de mesurage de la pression des gaz de carter utilisant une sonde de mesure
NF A09-491:1989 Non destructive testing. Tightness testing. Testing by accumulation or sniffing of gas.

Professional Standard - Aviation, Exhaust gas detection box

HB 6783.2-1993 Military airborne equipment climate environment test chamber (room) verification method Low pressure (altitude) test chamber (room)
HB 6783.11-1993 Military airborne equipment climate environment test chamber (room) verification method Explosive atmosphere test chamber (room)
HB 6783.10-1993 Military airborne equipment climate environment test box (room) verification method sand dust test box (room)
HB 6783.3-1993 Military airborne equipment climate environment test chamber (room) verification method temperature test chamber (room)
HB 6783.6-1993 Military airborne equipment climate environment test box (room) verification method rain test box (room)
HB 6783.7-1993 Military airborne equipment climate environment test chamber (room) verification method damp heat test chamber (room)
HB 6783.8-1993 Military airborne equipment climate environment test box (room) verification method mold test box (room)
HB 6783.9-1993 Military airborne equipment climate environment test chamber (room) verification method Salt spray test chamber (room)
HB 6783.12-1993 Military airborne equipment climate environment test chamber (room) verification method Immersion test chamber (room)
HB 6783.4-1993 Military Airborne Equipment Climatic Environment Test Chamber (Chamber) Verification Method Temperature-Altitude Test Chamber (Chamber)
HB 6783.5-1993 Military airborne equipment climate environment test chamber (room) verification method solar radiation test chamber (room)
HB 7122.4-1994 Civil aircraft airborne equipment climate environment test box (room) verification method waterproof test box (room)
HB 7122.5-1994 Civil aircraft airborne equipment climate environment test box (room) verification method sand dust test box (room)
HB 7122.6-1994 Civil aircraft airborne equipment climate environment test chamber (room) verification method Salt spray test chamber (room)
HB 6783.13-1993 Military airborne equipment climate environment test box (room) verification method temperature-humidity-altitude test box (room)
HB 7122.3-1994 Civil aircraft airborne equipment climate environment test chamber (room) verification method temperature and humidity test chamber (room)
HB 7122.2-1994 Civil Aircraft Airborne Equipment Climatic Environment Test Chamber (Chamber) Verification Method Temperature and Altitude Test Chamber (Chamber)
HB 6783.1-1993 General rules for verification methods of military airborne equipment climate environment test chamber (room)
HB 7122.1-1994 General rules for verification methods of climate and environment test chambers (rooms) for airborne equipment of civil aircraft

KR-KS, Exhaust gas detection box

KS R ISO 8178-1-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
KS R ISO 8178-2-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions

Shanxi Provincial Standard of the People's Republic of China, Exhaust gas detection box

DB14/T 2808-2023
DB14/T 2014-2020 Determination of Methanol in Ambient Air and Exhaust Gas Chromotropic Acid Spectrophotometry

AT-ON, Exhaust gas detection box

ONORM S 2116-5-2001 Examinations of solidified wastes - Determination of availability
ONORM E 1378-1971 Test probe for food wasle disposal unils.
ONORM M 7535-5-1997 Testing of waste gases of furnace Systems - Measuring equipment for the determination of the combustion temperature of gases - Requirements, testing, marking of conformity

PL-PKN, Exhaust gas detection box

PN C04557-1972 Water and waste water Determination of odór and flavour
PN C04642-01-1991 Water and waste water Tests of pollutants in atmospheric precipitation General
PN C04642-02-1991 Water and waste water Tests of pollutants in atmospheric precipitation Sampling

U.S. Air Force, Exhaust gas detection box

AIR FORCE A-A-59881-2011 TESTER, EXHAUST GAS TEMPERATURE CIRCUIT

Japanese Industrial Standards Committee (JISC), Exhaust gas detection box

JIS K 0106:1995 Methods for determination of chlorine in flue gas
JIS K 0106:2010 Methods for determination of chlorine in flue gas
JIS K 0081:2012 Method for determination of boron in flue gas
JIS B 8008-2:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions at site
JIS Z 4820:2002 Test method for leakage of glove boxes
JIS B 8008-1:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
JIS K 0221:1988 Methods for determination of arsenic in flue gas
JIS K 0106 ERRATUM 1:2000 Methods for determination of chlorine in flue gas (Erratum 1)
JIS K 0099 ERRATUM 1:2000 Methods for determination of ammonia in flue gas (Erratum 1)
JIS Z 8808:1995 Methods of measuring dust concentration in flue gas
JIS D 4101:1994 Testing method of rubber bellows for air springs
JIS B 8043-1:2000 Gas turbines -- Exhaust gas emission -- Part 1: Measurement and evaluation
JIS K 0104:2000 Methods for determination of nitrogen oxides in flue gas
JIS K 0350-20-10:2001 Testing methods for detection and enumeration of coliform organisms in industrial water and waste water
JIS B 8043-2:2000 Gas turbines -- Exhaust gas emission -- Part 2: Automated emission monitoring
JIS K 0098:1988 Methods for determination of carbon monoxide in flue gas
JIS K 0302:1989 Measuring method for particle-size distribution of dusts in flue gas
JIS K 0103:1995 Methods for determination of sulfur oxides in flue gas
JIS K 0103:2005 Methods for determination of sulfur oxides in flue gas
JIS K 0103:1999 Methods for determination of sulfur oxides in flue gas
JIS K 0107:2002 Methods for determination of hydrogen chloride in flue gas
JIS K 0107:2012 Methods for determination of hydrogen chloride in flue gas
JIS K 0104:2011 Methods for determination of nitrogen oxides in flue gas
JIS K 0804:2022 Gas detector tube measurement system
JIS K 0102-3:2022 Testing methods for industrial water and industrial wastewater -- Part 3: Metals
JIS K 0103:2011 Methods for determination of sulfur oxides in flue gas
JIS B 7993:2008 Automated measuring systems for flue gas using non-exractive methods

VN-TCVN, Exhaust gas detection box

TCVN 6204-2008 Road vehicles.Measurement methods for exhaust gas emissions during inspection or maintenance
TCVN 4558-1988 Waste water.Metrods for the determination of colour and smell
TCVN 6503-1-1999 Gas turbines.Exhaust gas emission.Part 1: Measurement and evaluation
TCVN 7241-2003 Health care solid waste incinerators.Determination method of dusts concentration in fluegas
TCVN 7244-2003 Health care solid waste incinerators.Determination method of hydrochloric acid concentration (HCI) in fluegas
TCVN 7243-2003 Health care solid waste incinerators.Determination method of hydrofloride acid concentration (HF) in fluegas
TCVN 7242-2003 Health care solid waste incinerators.Determination method of carbon monoxide concentration (CO) in fluegas
TCVN 7246-2003 Health care solid waste incinerator.Determination method of sulfur dioxides (SO2) concentration in fluegas
TCVN 7245-2003 Health care solid waste incinerator.Determination method of nitrogen oxides (NOx) concentration in fluegas

Heilongjiang Provincial Standard of the People's Republic of China, Exhaust gas detection box

DB23/T 3468-2023 Disposal Specifications for Hemp Inspection and Testing Laboratory Waste

RU-GOST R, Exhaust gas detection box

GOST R 52408-2005 Reciprocating internal combustion engines. Exhaust emission. Part 2. Measurement of exhaust emission at site
GOST R 52408-2014 Reciprocating internal combustion engines. Exhaust emission and visible pollutants. Measurement of exhaust emission at site
GOST R ISO 11042-1-2001 Gas turbines. Methods of exhaust gas emission determinations
GOST R ISO 16000-10-2009 Indoor air. Part 10. Determination of the emission of volatile organic compounds from building products and furnishing. Emission test cell method
GOST ISO 24557-2015 Pulses. Determination of moisture content. Air-oven method

Sichuan Provincial Standard of the People's Republic of China, Exhaust gas detection box

DB51/T 1762-2014 General detection method of AC and DC resistance box
DB51/T 2164-2016 Microbiological Testing Laboratory Waste Disposal Guidelines

TH-TISI, Exhaust gas detection box

TIS 1727-1998 Road vehicles.measurement methods for exhaust gas emissions during inspection or maintenace

Shandong Provincial Standard of the People's Republic of China, Exhaust gas detection box

DB37/T 1885-2011 Regular Inspection and Evaluation of Special Containers for Natural Gas Cylinders
DB37/T 4432-2021 Determination of volatile aliphatic amines in waste gas from stationary pollution sources by gas chromatography
DB37/T 3535-2019 Technical Specifications for Stationary Pollution Source Exhaust Gas Monitoring Point Setting

Shanghai Provincial Standard of the People's Republic of China, Exhaust gas detection box

DB31/T 707-2013 Test method of heavy metals and brominated flame retardants in wastewater from recycling, recovery and treatment industry of waste electrical and electronic equipment
DB31/T 310014-2023 Determination of chlorine in waste gas from fixed pollution sources by ion chromatography
DB31/T 287-2002 Gas detection tube method for rapid detection of cooking fumes in catering industry

Shaanxi Provincial Standard of the People's Republic of China, Exhaust gas detection box

DB61/T 1466-2021 Hazardous waste disposal management specification for inspection and testing institutions

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Exhaust gas detection box

GB/T 34253-2017 Test method for resistance to freezer to microwave/oven usage on domestic ceramic wares
GB/T 34933-2017 Technical code for combiner box test of photovoltaic power station
GB/T 34637-2017 Non-destructive testing—Test methods for bubble leak detection

ES-UNE, Exhaust gas detection box

UNE-EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
UNE-EN ISO 20485:2018 Non-destructive testing - Leak testing - Tracer gas method (ISO 20485:2017)
UNE-EN ISO 10855-3:2018 Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO 10855-3:2018) (Endorsed by Asociación Española de Normalización in August of 2018.)
UNE-EN 50402:2017 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of gas detection systems (Endorsed by Asociación Española de Normalización in June of 2017.)
UNE-EN ISO 20475:2021 Gas cylinders - Cylinder bundles - Periodic inspection and testing (ISO 20475:2018)

未注明发布机构, Exhaust gas detection box

DIN EN ISO 8178-1:1996 Reciprocating internal combustion engines, Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
SAE AIR5892B-2004 Nonvolatile Exhaust Particle Measurement Techniques
BS ISO 11042-1:1996(2000) Gas turbines — Exhaust gas emission — Part 1 : Measurement and evaluation
BS EN 16167:2018(2019) Soil, treated biowaste and sludge - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC - MS) and gas chromatography with electron - capture detection (GCECD)
BS ISO 11042-2:1996(2000) Gas turbines — Exhaust gas emission — Part 2 : Automated emission monitoring
BS EN 1593:1999(2008) Non - destructive testing — Leak testing — Bubble emission techniques
BS EN 15527:2008(2009) Characterization of waste — Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC / MS)

BR-ABNT, Exhaust gas detection box

ABNT MB-1228-1980

Professional Standard - Environmental Protection, Exhaust gas detection box

HJ 1012-2018 Ambient air and stationary source emission--Specifications and test procedures for total hydrocarbons, methane and nonmethane hydrocarbons portable monitoring instrument
HJ 1013-2018 Technical requirements and detection methods for continuous monitoring system of non-methane total hydrocarbons in waste gas from stationary pollution sources
HJ/T 397-2007 Technical specifications for emission monitoring of stationary source
HJ 1219-2021 Determination of pyridine in ambient air and exhaust gas by gas chromatography
HJ 547-2009 Stationary source emission.Determination of chlorine.Iodometric method
HJ 547-2017 Iodometric method for the determination of chlorine gas in waste gas from stationary pollution sources
HJ 1011-2018 Technical requirements and detection methods of portable Fourier transform infrared monitor for volatile organic compounds in ambient air and exhaust gas
HJ 1262-2022 Ambient air and waste gas—Determination of odor— Triangle odor bag method
HJ 549-2009 Ambient air and waste gas.Determination of hydrogen chloride.Ion chromatography
HJ 549-2016 Ambient air and stationary source emissions -Determination of Hydrogen Chloride-Ion Chromatography
HJ 869-2017 Stationary source emission-Determination of phthalate esters - Gas chromatography
HJ 533-2009 Ambient air exhaust gas.Determination of ammonia.Nessler's reagent spetcrophotometry
HJ 1042-2019 Ambient air and waster gas-Determination of trimethylamine-Solvent absorption-Headspace/gas chromatography
HJ 545-2009 Stationary source emission.Determination of total gaseous phosphorus.Quimociac volumetric analysis
HJ 1079-2019 Determination of Chlorobenzene Compounds in Waste Gases from Stationary Pollution Sources by Gas Chromatography
HJ 545-2017 Determination of Gaseous Total Phosphorus in Exhaust Gases from Stationary Pollutants
HJ 801-2016 Ambient air and waste gas-Determination of amide compounds-Liquid chromatography
HJ 1006-2018 Determination of volatile halogenated hydrocarbons in waste gas from stationary pollution sources Air bag sampling-gas chromatography
HJ 711-2014 Solid waste.Determination of phenolic compounds.Gas chromatography
HJ/T 70-2001 High-chlorine wastewater.Determination of chemical oxygen demand.Chlorine emendation method
HJ 975-2018 Solid waste-Determination of benzene and its analogies-Headspace-gas chromatography
HJ 768-2015 Determination of Organophosphorus Pesticides in Solid Waste by Gas Chromatography
HJ 646-2013 Ambient air and stationary source emissions.Determination of gas and particle-phase polycyclic aromatic hydrocarbons with gas chromatography/mass spectrometry

Lithuanian Standards Office , Exhaust gas detection box

LST ISO 3929:2004 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance (idt ISO 3929:2003)
LST EN 15308-2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
LST EN 13185-2002 Non-destructive testing - Leak testing - Tracer gas method
LST EN 13185-2002/A1-2004 Non-destructive testing - Leak testing - Tracer gas method
LST EN 16167-2012 Sludge, treated biowaste and soil - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)
LST EN 1593-2001 Non-destructive testing - Leak testing - Bubble emission techniques
LST EN 1593-2001/A1-2004 Non-destructive testing - Leak testing - Bubble emission techniques
LST EN 15527-2008 Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS)
LST EN 12079-3-2006 Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing

Indonesia Standards, Exhaust gas detection box

SNI 19-6036-1999 Test method for hydrogen peroxide (H2O2) in waste water
SNI 19-2875-1992 Waste water, Test method for biochemical oxygen demand
SNI 13-3621-1994 Air quantity measurement travers method in underground mining by vane anemometer instruments
SNI 7117.14-2009
SNI 19-7117.15-2009

Henan Provincial Standard of the People's Republic of China, Exhaust gas detection box

DB4117/T 333-2022 Management specification for inspection and testing waste of pressure-bearing special equipment

CZ-CSN, Exhaust gas detection box

CSN 83 0210-1963 Determination of Sulphur Oxydes in Flue Gases
CSN 39 5006 Z1-1997
CSN 77 0332-1980 Testing of sheet materials. Determination of water-vapour transmission rate - dish method
CSN 26 9355-1983 Series 1 freight containers - Specification and testing - Part 3: Tank containers for liquids and gases

RO-ASRO, Exhaust gas detection box

STAS 6560-1982 SURFACE AND WASTE WATER Determination of biochemical oxygencdemand
STAS 6954-1982 SURFACE AND WASTE WATERS Detennination of chcmical oxygen demand
STAS 7291-1965

SAE - SAE International, Exhaust gas detection box

SAE J254-1971 INSTRUMENTATION AND TECHNIQUES FOR EXHAUST GAS EMISSIONS MEASUREMENT
SAE J254-1984 Instrumentation and Techniques for Exhaust Gas Emissions Measurement
SAE AIR5892A-2004 Nonvolatile Exhaust Particle Measurement Techniques
SAE AIR5892-2004 Nonvolatile Exhaust Particle Measurement Techniques

European Committee for Standardization (CEN), Exhaust gas detection box

CEN EN 15308-2008 Characterization of waste — Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
EN 15308:2016 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection
EN 15308:2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
EN 12079:1999 Offshore Containers - Design, Construction, Testing, Inspection and Marking
EN ISO 10855-3:2018 Offshore containers and associated lifting sets - Part 3: Periodic inspection@ examination and testing
EN ISO 20475:2020 Gas cylinders - Cylinder bundles - Periodic inspection and testing (ISO 20475:2018)

Association of German Mechanical Engineers, Exhaust gas detection box

VDI 3481 Blatt 2-1998 Gaseous emission measurement - Determination of gaseous organic carbon in waste gases - Adsorption on silica gel
VDI 3862 Blatt 8-2015 Measurement of gaseous emissions - Measurement of formaldehyde in the exhaust gas of combustion engines - FTIR method
VDI 2462 Blatt 2-2011 Measurement of gaseous emissions - Determination of sulphur trioxide in water vapour containing exhaust gas - Condensation method

API - American Petroleum Institute, Exhaust gas detection box

API 4121-1971 IMPROVED INSTRUMENTATION FOR DETERMINATION OF EXHAUST GAS OXYGENATE CONTENT

American Society of Mechanical Engineers (ASME), Exhaust gas detection box

ASME B133.9-1994 Measurement of exhaust emissions from stationary gas turbine engines
ASME B133.9-1994(R2001) Measurement of Exhaust Emissions from Stationary Gas Turbine Engines

AENOR, Exhaust gas detection box

UNE 49756-2:1974 TESTS OF CISTERN-CONTAINERS, SERIES 1 FOR GAS AND LIQUIDS
UNE-EN 13185/A1:2004 Non-destructive testing - Leak testing - Tracer gas method
UNE-EN 1593/A1:2004 Non-destructive testing - Leak testing - Bubble emission techniques
UNE-EN 15527:2008 Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS)
UNE-EN 12079-3:2009 Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing

National Metrological Verification Regulations of the People's Republic of China, Exhaust gas detection box

JJG(机械) 10-1990 Verification rules for refrigerator performance comprehensive test device
JJG 1105-2015 Ammonia Gas Detectors
JJG(交通) 012-2005 The Automobile Engine Crankcase Force Tester
JJG 1022-2007 Verification Regulation of Formaldehyde Gas Analyzer
JJG 1022-2016 Verification Regulations for Formaldehyde Gas Detector
JJG(煤炭) 10-1998 Verification Regulation of Oxygen Detector
JJG 695-2019 Sulfur Hydrogen Gas Detectors
JJG 695-2003 Sulfur Hydrogen Gas Detectors
JJG 1087-2013 Verification Regulation of Oxygen Alarm Detectors for Mining
JJG 693-2011 Verification Regulation of Alarmer Detectors of Combustible Gas

Professional Standard - Coal, Exhaust gas detection box

MT 273-1994 Detector tube for ammonia gas
MT 275-1994 Detector tube for oxygen
MT 276-1994 Detector tube for hydrogen
MT/T 275-1994
MT/T 276-1994
MT/T 273-1994
MT 981-2006 Oxygen element for coal mine gas detection

Zhejiang Provincial Standard of the People's Republic of China, Exhaust gas detection box

DB33/T 310014-2023 Determination of chlorine in waste gas from fixed pollution sources by ion chromatography

Anhui Provincial Standard of the People's Republic of China, Exhaust gas detection box

DB34/T 310014-2023 Determination of chlorine in waste gas from fixed pollution sources by ion chromatography

工业和信息化部, Exhaust gas detection box

HG/T 5016-2016 Determination method of fluorine content in fluorine-containing waste gas
QB/T 5570-2021 Paper industry energy detection and evaluation method wastewater treatment system
HG/T 5722-2020 Rubber air tightness detector

American Society for Testing and Materials (ASTM), Exhaust gas detection box

ASTM C1207-10(2018) Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
ASTM D4728-01 Standard Test Method for Random Vibration Testing of Shipping Containers
ASTM D4728-95 Standard Test Method for Random Vibration Testing of Shipping Containers
ASTM D4728-06 Standard Test Method for Random Vibration Testing of Shipping Containers
ASTM D4728-06(2012) Standard Test Method for Random Vibration Testing of Shipping Containers
ASTM D7045-17 Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for Waste Disposal Facilities

Chongqing Provincial Standard of the People's Republic of China, Exhaust gas detection box

DB50/T 838-2017 Determination of Triethylamine in Stationary Pollution Source Exhaust Gas by Gas Chromatography
DB50/T 837-2017 Determination of ethanethiol in waste gas from stationary pollution sources by gas chromatography
DB50/T 679-2016 Determination of VOCS in exhaust gas from stationary pollution sources by gas chromatography-mass spectrometry
DB50/T 836-2017 Determination of ethyl acetate in waste gas from stationary pollution sources by gas chromatography

YU-JUS, Exhaust gas detection box

JUS C.Z7.012-1993 Halloware for preparing food on electric cookers - Requirements and testing

National Metrological Technical Specifications of the People's Republic of China, Exhaust gas detection box

JJF(建材)129-2018 Calibration Specification for Constant Temperature and Humidity Chambers for Safety Glass
JJF(建材) 129-2018 Calibration specification for constant temperature and humidity chamber for safety glass testing
JJF 1261.15-2014 Rules of Metrology Testing for Energy Efficiency Label of Household Refrigerators
JJF(烟草) 22.2-2008 Rotating box method

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Exhaust gas detection box

ASHRAE KC-03-8-1-2003 Application of Control Charts for Detecting Faults in Variable-Air-Volume Boxes

CEN - European Committee for Standardization, Exhaust gas detection box

EN 12079:2006 Offshore Containers - Design@ Construction@ Testing@ Inspection and Marking
EN ISO 20485:2018 Non-destructive testing - Leak testing - Tracer gas method
EN 15527:2008 Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS)

IX-UIC, Exhaust gas detection box

UIC O 624-2012 Exhaust emission tests for diesel traction engines

Beijing Provincial Standard of the People's Republic of China, Exhaust gas detection box

DB11/T 1367-2016 Determination of methane/total hydrocarbons/non-methane total hydrocarbons in exhaust gas from stationary pollution sources Portable hydrogen flame ionization detector method

Fujian Provincial Standard of the People's Republic of China, Exhaust gas detection box

DB35/T 1913-2020 Determination of non-methane total hydrocarbons in exhaust gas from stationary pollution sources Portable catalytic oxidation-hydrogen flame ionization detector method

Professional Standard - Energy, Exhaust gas detection box

NB/T 11127-2023 Technical specification for scrap detection of in-use steel cord conveyor belts

Professional Standard - Traffic, Exhaust gas detection box

JT/T 79-2008 Inspection and test standards for port container hoist machines
JT/T 79-1994 Technical specification for detection of large lifting machinery for port containers

中国气象局, Exhaust gas detection box

QX/T 637-2022 Climate forecasts test tropical cyclones

NL-NEN, Exhaust gas detection box

NEN 3235 10.1-1978 Test methods for waste water. Determination of gas production of sludg
NEN 6681-1981 Waste water - Volumetric determination of carbon dioxide and oxygen in gases

中华人民共和国国家卫生和计划生育委员会, Exhaust gas detection box

GB/T 18204.13-2000 Methods for determination of air temperature in public places
GB/T 18204.19-2000 Method for measurement of infiltration rates of indoor air in public places
GB 17022-1997 Criteria for quality assessment of field semi-quantitative test kit of salt iodine

国家市场监督管理总局、中国国家标准化管理委员会, Exhaust gas detection box

GB/T 40335-2021 Non-destructive testing—Leak testing—Tracer gas method
GB/T 40200-2021 Method of testing the performance of equipment for industrial organic waste gas purification

FI-SFS, Exhaust gas detection box

SFS 3296-1978

US-FCR, Exhaust gas detection box

FCR UFGS-28 33 00.00 40-2014 FUEL-GAS DETECTION AND ALARM

National Fire Protection Association (NFPA), Exhaust gas detection box

NFPA 1911-2012 Standard for the Inspection, Maintenance, Testing, and Retirement of In-Service Automotive Fire Apparatus (Effective Date: 1/2/2012)

国家发展和改革委员会, Exhaust gas detection box

MT/T 981-2006 Oxygen components for coal mine gas detection

ES-AENOR, Exhaust gas detection box

Standard Association of Australia （SAA）, Exhaust gas detection box

AS 4812:2023 Non-destructive examination and discard criteria for wire ropes in mine winding systems
AS EN 12079.3:2010

国家市场监督管理总局, Exhaust gas detection box

RB/T 042-2020 Electrical inspection and testing requirements for management and technical capability evaluation of inspection and testing institutions

IT-UNI, Exhaust gas detection box

UNI EN ISO 20475:2021 Gas cylinders - Cylinder bundles - Periodic inspection and testing

GOSTR, Exhaust gas detection box

GOST R ISO 8178-5-2017 Reciprocating internal combustion engines. Exhaust emission measurement. Part 5. Test fuels

Professional Standard - Railway, Exhaust gas detection box

TB/T 1912-2005 Allowable Concentration and Measurement of Locomotive Exhaust in Railway Operating Tunnel

中华人民共和国环境保护部, Exhaust gas detection box

(HJ 711-2014) Solid waste —Determination of phenolic compounds —Gas chromatography

Ningxia Provincial Standard of the People's Republic of China, Exhaust gas detection box

DB64/T 1120-2015 Technical regulations for the determination of greenhouse gases in cornfields by static box method
DB64/T 725-2011 Technical regulations for the determination of greenhouse gases in paddy fields by static chamber method