ZH
RU
ES
Pre-discharge of wastewater
Pre-discharge of wastewater, Total:495 items.
In the international standard classification, Pre-discharge of wastewater involves: Vocabularies, Water quality, Installations in buildings, Extraction and processing of petroleum and natural gas, External sewage systems, Wastes, Inland navigation vessels, Environmental protection, Nuclear energy engineering, Shipbuilding and marine structures in general, Rubber, Elements of buildings, Small craft, Air quality, Gas and steam turbines. Steam engines, Radiation measurements, Radiation protection, Railway rolling stock, Pipeline components and pipelines, Services, Internal combustion engines, Power stations in general, Internal combustion engines for road vehicles, Plastics, Kitchen equipment, Terminology (principles and coordination), Road vehicles in general, Protection against dangerous goods, Domestic, commercial and industrial heating appliances, Motor cycles and mopeds, External water conveyance systems, Insulation, Rubber and plastics products, Earthworks. Excavations. Foundation construction. Underground works, Construction industry, Products of the textile industry, Farming and forestry, Measurement of fluid flow, Products of non-ferrous metals, Medical equipment, Diagnostic, maintenance and test equipment, Analytical chemistry, Valves, Railway engineering in general, Seals, glands, Protection against fire.
VN-TCVN, Pre-discharge of wastewater
- TCVN 5945-2010 Industrial waste water.Discharge standards
- TCVN 5945-2005 Industrial waste water.Discharge standards
- TCVN 7382-2004 Water quality.Hospital waste water.Discharged standards
- TCVN 7733-2007 Water quality.Effluent standards for leachate of solid waste landfill sites
- TCVN 6204-2008 Road vehicles.Measurement methods for exhaust gas emissions during inspection or maintenance
Professional Standard - Environmental Protection, Pre-discharge of wastewater
Zhejiang Provincial Standard of the People's Republic of China, Pre-discharge of wastewater
- DB33/ 453-2006 Aquaculture Wastewater Discharge Requirements
- DB33/ 887-2013 Indirect discharge limits of nitrogen and phosphorus pollutants from industrial enterprises wastewater
Tianjin Provincial Standard of the People's Republic of China, Pre-discharge of wastewater
RU-GOST R, Pre-discharge of wastewater
- GOST 23289-2016 Waste water drain sanitary accessories. Specifications
- GOST 23289-1978 Waste water drain sanitary accessories. General technical requirements
- GOST 23412-1979 Waste water drain sanitary accessories. Types and principal dimensions
- GOST R 57063-2016 Resources saving. Waste treatment. Indicators for the environmental impact of waste emissions
- GOST R 56828.12-2016 Best available techniques. Classification of water bodies for the process of regulating wastewater discharges of centralized sewerage systems of settlements
- GOST ISO 8178-11-2015 Reciprocating internal combustion engines. Exhaust emission measurement. Part 11. Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
- GOST 32370-2013 Testing of chemicals of environmental hazard. Simulation Tests to Assess the Biodegradability of Chemicals Discharged in Wastewater
- GOST R 51249-1999 Internal combustion reciprocating engines. Emissions of harmful substances with the exhaust gases. Limit values and test methods
- GOST R 50953-2008 Emission of the exhaust gas pollutants by the main-line and shunting diesel locomotives. Norms and determination methods
- GOST R 50953-1996 Emission of the exhaust gas pollutants by the main line and shunting diesel locomotives. Norms and determination methods
- GOST 31967-2012 Internal combustion reciprocating engines. Emissions of harmful substances with the exhaust gases. Limit values and test methods
Shaanxi Provincial Standard of the People's Republic of China, Pre-discharge of wastewater
- DB61/ 308-2003 Discharge Standards for Petroleum Exploitation Wastewater
AENOR, Pre-discharge of wastewater
- UNE-EN 1306:1996 INLAND NAVIGATION VESSELS. CONNECTIONS FOR THE DISCHARGE OF WASTE WATER.
- UNE 27689-1:1976 SIDE DISCHARGE VALVES WITH OPERATION. VERTICAL INLET AND HORIZONTAL DISCHARGE.
Danish Standards Foundation, Pre-discharge of wastewater
- DS/INF 161:2004 Plastics pipes - Soil and waste discharge, sewerage and drainage - Glossary of terms
- DS/EN 1306:1997 Inland navigation vessels. Connections for the discharge of waste water
- DS 432/Till. 1:2012 Code of Practice for Sanitary Drainage - Wastewater Installations - Amendment 1: Prevention against flooding - Anti-flooding devices for buildings
- DS/EN 16429:2021 Stationary source emissions – Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
- DS/ISO 17479:2013 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
- DS/CEN/TR 12566-5:2009 Small wastewater treatment systems up to 50 PT- Part 5: Pre-treated Effluent Filtration systems
- DS/EN 14790:2005 Stationary source emissions - Determination of the water vapour in ducts
- DS/CEN/TS 16229:2011 Characterization of waste - Sampling and analysis of weak acid dissociable cyanide discharged into tailings ponds
Professional Standard - Machinery, Pre-discharge of wastewater
- JB 7740-1995 Regulations on discharge of oil-bearing wastewater in mechanical industry
Hunan Provincial Standard of the People's Republic of China, Pre-discharge of wastewater
- DB43/ 968-2014 Discharge standard of industrial wastewater thallium pollutant
- DB43/ 2426-2022 Discharge Standards for Manganese Pollutants in Industrial Wastewater
- DB43/T 969-2014 Technical specifications for manganese, lead and cadmium online monitoring system for wastewater discharged from pollution sources
Guangdong Provincial Standard of the People's Republic of China, Pre-discharge of wastewater
- DB44/ 1989-2017 Discharge standard of industrial wastewater thallium pollutant
Jiangxi Provincial Standard of the People's Republic of China, Pre-discharge of wastewater
- DB36/ 1149-2019 Discharge standard of industrial wastewater thallium pollutant
German Institute for Standardization, Pre-discharge of wastewater
- DIN EN 1306:2018-05 Inland navigation vessels - Connections for the discharge of waste water; German version EN 1306:2018
- DIN EN 1306:2018 Inland navigation vessels - Connections for the discharge of waste water
- DIN EN 60861:2008 Equipment for monitoring of radionuclides in liquid effluents and surface waters (IEC 60861:2006, modified); German version EN 60861:2008
- DIN EN 16922:2019-09 Railway applications - Ground based services - Vehicle waste water discharge equipment; German version EN 16922:2017+A1:2019
- DIN 25465:1999 Monitoring and assessment of the discharge of radioactive substances in liquid effluents
- DIN 19667:1991 Drainage of landfills; code of practice for design, construction and operation
- DIN 38402-6:1991 German standard methods for the examination of water, waste water and sludge; general information (group A); assessment of the minimum frequency for controlling water constituents in discharges (emission strategy) (A 6)
- DIN EN ISO 18854:2015-08 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015); German version EN ISO 18854:2015
- DIN EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
- DIN EN 1455-1:1999-12 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specification for pipes, fittings and the system; German version EN 1455-1:1999 / Note: DIN ...
- DIN EN 1566-1:2020-08 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Requirements for pipes, fittings and the system; German and English version prEN 1566-1:2...
- DIN EN 1566-1:1999-12 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system; German version EN 1566-1:1998 / Note: ...
- DIN CEN/TS 1455-2:2012-09*DIN SPEC 19579:2012-09 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1455-2:2012 / Note: Applies...
- DIN CEN/TS 1566-2:2012-09*DIN SPEC 19582:2012-09 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1566-2:2012 / Note: Appl...
- DIN CEN/TS 1329-2:2018-08*DIN SPEC 19577:2018-08 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1329-2:2018 / Note: Ap...
- DIN EN 1455-1:2020-08 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Requirements for pipes, fittings and the system; German and English version prEN 1455-1:2020...
- DIN 19569-9:2017 Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 9: Mechanical drainage of sewage sludge
- DIN 19569-9:2004 Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 9: Mechanical drainage of sewage sludge
- DIN EN 16922:2019 Railway applications - Ground based services - Vehicle waste water discharge equipment (includes Amendment :2019)
- DIN EN 16922:2017 Railway applications - Ground based services - Vehicle waste water discharge equipment; German version EN 16922:2017
- DIN EN 476:2011 General requirements for components used in drains and sewers; German version EN 476:2011
- DIN EN 16429:2021-05 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere; German version EN 16429:2021
- DIN EN 16429:2020 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere; German and English version prEN 16429:2019
- DIN 3283:1988 Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with internal threads
- DIN EN 12566-6:2016-12 Small wastewater treatment systems for up to 50 PT - Part 6: Prefabricated treatment units for septic tank effluent; German version EN 12566-6:2016 / Note: To be replaced by DIN EN 12566-6 (2018-12).
- DIN EN 1453-1:2017-09 Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system; German version EN 1453-1:2017 + ...
- DIN EN 16429:2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere; German version EN 16429:2021
- DIN ISO 19694-3:2021-05 Stationary source emissions - Determination of greenhouse gas emissions in energy-intensive industries - Part 3: Cement industry (ISO/DIS 19694-3:2021); Text in German and English / Note: Date of issue 2021-04-09
- DIN EN 19694-3:2016-10 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 3: Cement industry; German version EN 19694-3:2016
ES-UNE, Pre-discharge of wastewater
- UNE-EN 1306:2018 Inland navigation vessels - Connections for the discharge of waste water
- UNE-EN 16922:2018+A1:2020 Railway applications - Ground based services - Vehicle waste water discharge equipment
- UNE-EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
- UNE-CEN/TS 1329-2:2021 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normali...
- UNE-CEN/TS 1519-2:2020 Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in September of 20...
- UNE-EN 16429:2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
- UNE-EN 16907-7:2022 Earthworks - Part 7: Hydraulic placement of extractive waste
- UNE-EN 19694-3:2018 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 3: Cement industry
机械工业部, Pre-discharge of wastewater
- JB/T 7740-1995 Regulations on the discharge of oily wastewater from the machinery industry
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Pre-discharge of wastewater
- GB 14587-1993 Technical rules for discharge system of radioactive waste water from LWR nuclear power plant
- GB/T 42992.1-2023 General principles for chemical simulation tests to evaluate the biodegradability of chemicals discharged into wastewater
- GB/T 28178-2011 Landfill disposal for very low level radioactive waste
- GB/T 27888.3-2011 Ships and marine technology. Drainage systems on ships and marine structures. Part 3:Sanitary drainage,drain piping for vacuum systems
- GB/T 27888.2-2011 Ships and marine technology.Drainage systems on ships and marine structures.Part 2: Sanitary drainage,drain piping for gravity systems
- GB 13600-1992 Regulations for disposal of solid low-and intermediate level radioactive wastes in rock cavities
National Sanitation Foundation (NSF), Pre-discharge of wastewater
- NSF 418-2014 Residential Wastewater Effluent Filters Longevity Testing
Lithuanian Standards Office , Pre-discharge of wastewater
- LST EN 1306-2001 Inland navigation vessels - Connections for the discharge of waste water
- LST EN 16429-2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
- LST EN 14790-2006 Stationary source emissions - Determination of the water vapour in ducts
- LST ISO 3929:2004 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance (idt ISO 3929:2003)
Association Francaise de Normalisation, Pre-discharge of wastewater
- NF J82-956*NF EN 1306:2018 Inland navigation vessels - Connections for the discharge of waste water
- NF J82-956:1996 Inland navigation vessels. Connections for the discharge of waste water.
- NF P40-202-2:2013 Building works - Calculation rules for sanitary installations and rainwater draining off - Part 2: waste and black water draining
- NF J22-920:1990 SHIPBUILDING. YACHTS. WASTE WATER FITTINGS. (EUROPEAN STANDARD EN 24567).
- NF C19-112*NF EN 60861:2008 Equipment for monitoring of radionuclides in liquid effluents and surface waters.
- NF P41-220/A2:2000 DTU 60.2 - Building works - Cast iron for soil water, rain water and waste water drainage - Technical specifications.
- NF J95-067*NF EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measutrement - Test-bed measurement of gaseous and particulate exhaust emissions
- FD P16-004:2011 Assainissement - Rôle potentiel des végétaux lors du traitement et du rejet des eaux usées
- NF P15-900-3:2002 Local public services - Guidelines for service activities relating to drinking water supply and sewerage - Part 3 : management of waste water treatment.
- NF DTU 60.2 P1-1:2007 Travaux de Bâtiment - Canalisations en fonte - Évacuation d'eaux usées, d'eaux vannes et d'eaux pluviales - Partie 1-1 : cahier des Clauses Techniques
- NF E37-211-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
- NF E37-211-1:1997 Reciprocating internal combustion engines. Exhaust emission measurement. Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
- NF P41-220:1993 DTU 60.2 - Building works - Cast ison pipes for soil water, rain water and waste water drainage - Technical specification.
- XP X43-420:2011 Émissions de sources fixes - Assurance qualité des PEMS (Système prédictif de suivi des émissions atmosphériques)
- NF E37-211-2*NF ISO 8178-2:2022 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2 : measurement of gaseous and particulate exhaust emissions under field conditions
- NF P52-305-1/A1:1999 DTU 65.10 - Building works - Piping used for cold and hot pressure water and piping for evacuation waste water and rain water inside buildings - General rules of execution - Part 1 : technical specifications.
- NF DTU 60.11 P2:2013 Travaux de bâtiment - Règles de calcul des installations de plomberie sanitaire et d'eaux pluviales - Partie 2 : évacuation des eaux usées et des eaux vannes
- NF DTU 60.2 P1-2:2007 Travaux de Bâtiment - Canalisations en fonte - Évacuation d'eaux usées, d'eaux vannes et d'eaux pluviales - Partie 1-2 : critères Généraux de choix des Matériaux
- XP ISO/TS 19700:2017 Méthode du rapport d'équivalence contrôlée pour la détermination des substances dangereuses des effluents du feu - Four tubulaire à conditions stables
- NF ISO 8178-9:2019 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 9 : cycles et procédures d'essai pour le mesurage au banc d'essai des émissions de fumées de gaz d'échappement des moteurs alternatifs à combust...
- NF ISO 8178-1:2020 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 1 : mesurage des émissions de gaz et de particules au banc d'essai
- NF E37-211-2:1996 Reciprocating internal combustion engines. Exhaust emission measurement. Part 2 : measurement of gaseous and particulate exhaust emissions at site.
- NF P15-900-4:2002 Local public services - Guidelines for service activities relating to drinking water supply and sewerage - Part 4 : management of drinking water system.
- NF DTU 60.33 P1-1:2007 Travaux de bâtiment - Canalisations en polychlorure de vinyle non plastifié - Évacuation d'eaux usées et d'eaux vannes - Partie 1-1 : cahier des clauses techniques
- NF E37-211-1*NF ISO 8178-1:2020 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement systems of gaseous and particulate emissions
- NF X43-134*NF EN 16429:2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
- FD CEN/TR 12566-5:2009 Petites installations de traitement des eaux usées jusqu'à 50 EH - Partie 5 : systèmes de filtration d'effluent prétraité
- NF G38-134*NF ISO 18325:2016 Geosynthetics - Test method for the determination of water discharge capacity for prefabricated vertical drains
- NF ISO 18325:2016 Géosynthétiques - Méthode d'essai pour la détermination de la capacité de décharge d'eau des drains verticaux préfabriqués
- NF X43-317:2011 Émissions de sources fixes - Détermination de l'indice de pollution acide ou alcaline des effluents gazeux
- NF P41-213:1993 DTU 60.33 - Building works - Unplasticized polyvinyl chloride piping installations - Waste water drainage - Technical specifications.
- NF E37-211-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2 : measurement of gaseous and particulate exhaust emissions under field conditions.
- NF DTU 60.33 P1-2:2007 Travaux de bâtiment - Canalisations en polychlorure de vinyle non plastifié - Évacuation d'eaux usées et d'eaux vannes - Partie 1-2 : critères généraux de choix des matériaux
- NF DTU 60.5 P1-1:2008 Travaux de bâtiment - Canalisations en cuivre - Distribution d'eau froide et chaude sanitaire, évacuation d'eaux usées, d'eaux pluviales, installations de génie climatique - Partie 1-1 : cahier des clauses techniques
- NF P41-220/A1:1999 DTU 60.2 - Building works - Cast ison pipes for soil water, rain water and waste water drainage - Technical specification.
- NF E37-211-9*NF ISO 8178-9:2019 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9 : test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
- NF P41-221/A2:2000 DTU 60.5 - Building works - Coper piping - Supply of hot and cold domestic water, drainage of waste water, rainwater, air conditioning installations - Technical specifications.
- NF DTU 60.5 P1-2:2008 Travaux de bâtiment - Canalisations en cuivre - Distribution d'eau froide et chaude sanitaire, évacuation d'eaux usées, d'eaux pluviales, installations de génie climatique - Partie 1-2 : critères généraux de choix des matériaux
- NF R10-018*NF ISO 3929:2004 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
- NF R10-018:1996 Road vehicles. Measurement procedures for exhaust gas emissions during inspection or maintenance.
- NF P41-220-1*NF DTU 60.2:2007 Building works - Cast iron pipes for soil water, rain water and waste water drainage - Part 1-1 : technical specifications - Part 1-2 : general criteria for selection of materials
- NF EN ISO 15749-4:2004 Navires et technologie maritime - Installations de drainage sur navires et structures maritimes - Partie 4 : drainage sanitaire, tuyaux d'évacuation des eaux usées
- NF ISO 8178-8:2015 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 8 : détermination des groupes de moteurs
- NF EN 16907-7:2021 Terrassements - Partie 7 : placement hydraulique de déchets miniers
- NF E37-211-8*NF ISO 8178-8:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 8 : engine group determination
- NF ISO 8178-7:2015 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 7 : détermination des familles de moteurs
- NF P41-221-1-2:2008 Building works - Copper piping - Supply of hot and cold domestic water, drainage of waste water, rainwater, air conditionning installations - Part 1-2 : general criteria for selection of materials.
- NF ISO 8178-3:2019 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 3 : définitions et méthodes de mesure de la fumée des gaz d'échappement dans des conditions stabilisées
- NF X43-371:2006 Stationary source emissions - Determination of the water vapour in ducts.
- XP X43-136:2013 Emissions de sources fixes - Détermination de la concentration en chrome VI hydrosoluble
- NF EN 19694-3:2016 Émissions de sources fixes - Détermination des émissions des gaz à effet de serre (GES) dans les industries énergo-intensives - Partie 3 : industrie du ciment
- NF E37-211-7*NF ISO 8178-7:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 7 : engine family determination
- NF ISO 8178-6:2018 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 6 : rapport de mesure et d'essai
- NF T54-977:2008 Plastics piping systems - Soil and waste discharge systems within the building structure - Performance characteristics for pipes, fittings and their joints.
- NF P52-305-1/A2:2000 DTU 65.10 - Building works - Piping used for cold and hot pressure water and piping for evacuation waste water and rain water inside buildings - General rules of execution - Part 1 : technical specifications.
- NF M60-317:2001 Énergie nucléaire - Technologie du cycle du combustible - Déchets - Détermination du nickel 63 dans les effluents et déchets par scintillation liquide, après séparation chimique préalable
- XP X30-486*XP CEN/TS 16229:2011 Characterization of waste - Sampling and analysis of weak acid dissociable cyanide discharged into tailings ponds
- NF X30-700-3*NF EN 19694-3:2016 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 3: Cement industry
- NF P16-800-3:2013 Small wastewater treatment systems for up to 50 PT - Part 3: packaged and/or site assembled domestic wastewater treatment plants
- NF ISO 26367-2:2017 Lignes directrices pour déterminer l'impact environnemental des effluents du feu - Partie 2 : méthodologie pour compiler les données relatives aux émissions des feux ayant un impact significatif sur l'environnement
- NF P41-221-1-1:2008 Building works - Copper piping - Supply of hot and cold domestic water, drainage of waste water, rainwater, air conditionning installations - Part 1-1 : contract bill technical clauses.
- NF DTU 60.2:2007 Travaux de Bâtiment - Canalisations en fonte - Évacuation d'eaux usées, d'eaux vannes et d'eaux pluviales - Partie 1-1 : cahier des Clauses Techniques - Partie 1-2 : critères Généraux de choix des Matériaux - Référence commerciale des parti...
United States Navy, Pre-discharge of wastewater
- NAVY MIL-DTL-20176 G-1997 HOSE AND HOSE ASSEMBLY, RUBBER, SMOOTH BORE, LIGHT-WEIGHT SEWAGE DISCHARGE AND OILY WASTE DISCHARGE
NZ-SNZ, Pre-discharge of wastewater
API - American Petroleum Institute, Pre-discharge of wastewater
- API PUBL 841-44700-1988 EXHAUST BENZENE EMISSIONS FROM LATE MODEL VEHICLES
- API PUBL 4470 VOL II-1988 Exhaust Benzene Emissions from Late Model Vehicles (Volume II)
- API RP 1633-1992 Handling Water Discharges from Automotive Service Facilities Located at Petroleum Marketing Operations
- API PUBL 4518-1990 Measurement of BTEX Emission Fluxes from Refinery Wastewater Impoundments Using Atmospheric Tracer Techniques
- API PUBL 4677-1999 Fugitive Emissions from Refinery Process Drains Volume I; Fugitive Emission Factors for Refinery Process Drains
- API PUBL 931 C18-1969 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON LIQUID WASTES - CHAPTER 18-DIFFUSION OF EFFLUENTS INTO RECEIVING WATERS
- API PUBL 4678-1999 Fugitive Emissions from Refinery Process Drains Volume II; Fundamentals of Fugitive Emissions from Refinery Process Drains
- API PUBL 931 C9-1977 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 9-SOURCES AND CONTROLS FOR EMISSIONS OF NITROGEN OXIDES
- API PUBL 4681-1999 Fugitive Emissions from Refinery Process Drains Volume III@ Process Drain Emission Calculator: APIDRAIN Version 1.0 (Includes Access to Additional Content)
- API ATMOSPHERIC EMISSIONS-1980 ATMOSPHERIC EMISSIONS FROM OILY WASTE LANDSPREADING - FINAL REPORT
- API PUBL 4734-2005 Modeling Study of Produced Water Release Scenarios
- API PUBL 4472-1989 Fate and Effects of Produced Water Discharges in Nearshore Marine Waters
- API PUBL 931 C16-1976 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 16-ODOR
- API PUBL 931 C17-1974 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 17-NOISE
Professional Standard - Agriculture, Pre-discharge of wastewater
- NY 687-2003 Discharge standard of wastewater pollution for natural rubber processing
European Committee for Standardization (CEN), Pre-discharge of wastewater
- EN 24567:1989 Shipbuilding; yachts; waste water fittings (ISO 4567:1978)
- EN 16922:2017 Railway applications - Ground based services - Vehicle waste water discharge equipment
- EN 1293:1999 General Requirements for Components Used in Pneumatically Pressurized Discharge Pipes, Drains and Sewers
- EN 773:1999 General Requirements for Components Used in Hydraulically Pressurized Discharge Pipes, Drains and Sewers
- EN 16429:2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
- EN 14790:2005 Stationary source emissions - Determination of the water vapour in ducts
- EN 14790:2017 Stationary source emissions - Determination of the water vapour in ducts - Standard reference method
- PD CEN/TR 13801:2014 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation
- prEN 476-1993 General requirements for components used in discharge pipes, drains and sewers for gravity systems
- prEN 476-1991 General requirements for components used in discharge pipes, drains and sewers for gravity systems
- EN ISO 13255:2017 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
- CEN/TS 16229:2011 Characterization of waste - Sampling and analysis of weak acid dissociable cyanide discharged into tailings ponds
- prEN 773-1992 General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
Jiangsu Provincial Standard of the People's Republic of China, Pre-discharge of wastewater
- DB32/ 3431-2018 Discharge standard of thallium pollutant in iron and steel industry wastewater
- DB32/T 3432-2018 Discharge standard of antimony pollutants in textile dyeing and finishing industrial wastewater
Group Standards of the People's Republic of China, Pre-discharge of wastewater
- T/CHBAS 6-2021 Waste water is used as circulating cooling water technical specification for zero emission treatment
- T/CEC 549-2021 Technical requirements for zero discharge treatment system of thermal power plant terminal wastewater
- T/GDES 8-2017 General technical requirements for zero discharge of electroplating waste water in eco-industrial park
- T/CQSES 02-2017 Voluntary discharge standard of pollutants for electroplating wastewater in Chongqing
- T/GDES 10-2017 Technical requirements for zero discharge of electroplating wastewater in eco - industrial park（Galvanized enterprise）
- T/NDAS 65-2022 Electroplating and nonferrous metal surface treatment industrial wastewater discharge treatment technology
- T/GDES 9-2017 Technical requirements for zero discharge of electroplating wastewater in eco - industrial park（Galvanized enterprise）
- T/HNAEPI 002-2021 Technical requirement and test method of on-line thallium monitor for pollutant discharge wastewater
- T/GDC 143-2022 Fugitive emissions—Determination of volatile organic compounds metal oxide method
Korean Agency for Technology and Standards (KATS), Pre-discharge of wastewater
- KS B ISO 11042-2:2005 Gas turbines-Exhaust gas emission-Part 2:Automated emission monitoring
- KS B ISO 11042-2:2015 Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
- KS A 4513-2000 MEASURING METHODS OF B RADIOACTIVITY CONCENTRATION OF DRAIN WATER
- KS A 4513-1985 MEASURING METHODS OF B RADIOACTIVITY CONCENTRATION OF DRAIN WATER
- KS K ISO 18325-2017(2022) Geosynthetics－Test method for the determination of water discharge capacity for prefabricated vertical drains
- KS K ISO 18325:2017 Geosynthetics－Test method for the determination of water discharge capacity for prefabricated vertical drains
- KS R 1046-2001(2011) Road vehicles?Measurement methods for exhaust gasemissions during inspection or maintenance
- KS R ISO 3929-2006(2021) Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
- KS R ISO 3929-2006(2016) Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
- KS R ISO 3929:2006 Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
- KS M ISO 3633:2012 Plastics piping systems for soil and waste discharge(low and high temperature) inside buildings－Unplasticized poly(vinyl chloride) (PVC-U)
- KS R ISO 8178-3-2007(2022) Reciprocating internal combustion engines－Exhaust emission measurement－Part 3：Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
- KS M ISO 7682:2009 Plastics piping systems for soil and waste discharge(low and high temperature) inside buildings－Acrylonitrile-butadiene-styrene(ABS)
International Organization for Standardization (ISO), Pre-discharge of wastewater
- ISO 11042-2:1996 Gas turbines - Exhaust gas emission - Part 2: Automated emission monitoring
- ISO 3930:2000 Instruments for measuring vehicle exhaust emissions
- ISO 8773:1991 Polypropylene (PP) pipes and fittings for buried drainage and sewerage systems; specifications
- ISO 8178-2:2021 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
- ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
- ISO 8772:1991 High density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems; specifications
- ISO 8772:2006 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE)
- ISO 8178-1:2020 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions
- ISO 8178-3:2019 Reciprocating internal combustion engines — Exhaust emission measurement — Part 3: Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type
- ISO 8770:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)
- ISO 7671:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP)
- ISO/TS 7024:2005 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Thermoplastics - Recommended practice for installation
- ISO 18325:2015 Geosynthetics - Test method for the determination of water discharge capacity for prefabricated vertical drains
- ISO 8178-9:2019 Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines usin
- ISO 7675:2003 Plastic piping systems for soil and waste discharge (low and high temperature) inside buildings - Chlorinated poly(vinyl chloride) (PVC-C)
- ISO 8770:1991 High-density polyethylene (PE-HD) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings; specifications
- ISO 3929:2003 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
- ISO 3929:1995 Road vehicles - Measurement methods for exhaust gas emmissions during inspection or maintenance
- ISO 19449:2015 Mopeds — Measurement methods for gaseous exhaust emissions during inspection or maintenance
- ISO 3633:2002 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U)
- ISO 7675:1991 Chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings; specifications
- ISO 19694-3:2023 Stationary source emissions — Determination of greenhouse gas emissions in energy-intensive industries — Part 3: Cement industry
- ISO 7682:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Acrylonitrile-butadiene-styrene (ABS)
- ISO 13255:2010 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
- ISO 11599:1997 Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste
GB-REG, Pre-discharge of wastewater
European Committee for Electrotechnical Standardization（CENELEC）, Pre-discharge of wastewater
- EN 60861:2008 Equipment for monitoring of radionuclides in liquid effluents and surface waters
International Electrotechnical Commission (IEC), Pre-discharge of wastewater
- IEC 60861:2006 Equipment for monitoring of radionuclides in liquid effluents and surface waters
- IEC 60861:1987 Equipment for continuously monitoring for beta and gamma emitting radionuclides in liquid effluents.
IT-UNI, Pre-discharge of wastewater
CEN - European Committee for Standardization, Pre-discharge of wastewater
- EN 16922:2017/PRA1:2018 Railway applications - Ground based services - Vehicle waste water discharge equipment
- PREN 12566-5-2004 Small wastewater treatment systems up to 50 PT - Part 5: Pretreated Effluent Filtration systems
- EN 19694-3:2016 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 3: Cement industry
British Standards Institution (BSI), Pre-discharge of wastewater
- BS EN 16922:2017+A1:2019 Railway applications. Ground based services. Vehicle waste water discharge equipment
- BS EN 1306:2018 Tracked Changes. Inland navigation vessels. Connections for the discharge of waste water
- BS ISO 8178-2:2021 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
- BS ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
- BS ISO 8178-1:2020 Reciprocating internal combustion engines. Exhaust emission measurement - Test-bed measurement systems of gaseous and particulate emissions
- 21/30426008 DC BS ISO 8178-2. Reciprocating internal combustion engines. Exhaust emission measurement. Part 2. Measurement of gaseous and particulate exhaust emissions under field conditions
- BS ISO 19449:2015 Mopeds. Measurement methods for gaseous exhaust emissions during inspection or maintenance
- BS DD ENV 1852-2:2001 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Guidance for the assessment of conformity
- BS 6069 Sec.4.2:1991 Characterization of air quality. Stationary source emissions. Method for the determination of asbestos plant emissions by fibre count measurement
- BS ISO 8178-3:2019 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type smoke meter
- BS ISO 8178-2:2009 Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
- BS ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Measurement of gaseous and particulate exhaust emissions under field conditions
- BS EN 16907-7:2021 Earthworks. Hydraulic placement of extractive waste
- BS EN 19694-3:2016 Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries. Cement industry
- BS ISO 18325:2015 Geosynthetics. Test method for the determination of water discharge capacity for prefabricated vertical drains
- BS ISO 8178-9:2019 Reciprocating internal combustion engines. Exhaust emission measurement - Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
- BS ISO 17479:2013+A1:2020 Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
- 19/30395228 DC BS EN 16429. Stationary source emissions. Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
- DD ENV 1401-2-2001 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Guidance for assessment of conformity
- BS EN 12566-1:2000 Small wastewater treatment systems for up to 50 PT - Prefabricated septic tanks
- BS EN 16429:2021 Tracked Changes. Stationary source emissions. Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
- BS EN 14790:2005 Stationary source emissions - Determination of the water vapour in ducts
- BS EN ISO 8178-6:2001 Reciprocating internal combustion engines - Exhaust emission measurement - Report of measuring results and tests
- BS ISO 8178-6:2001 Reciprocating internal combustion engines. Exhaust emission measurement. Report of measuring results and test
- BS ISO 8178-6:2000 Reciprocating internal combustion engines - Exhaust emission measurement - Report of measuring results and test
- BS ISO 6460-1:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - General test requirements
- BS ISO 3929:2003 Road vehicles. Measurement methods for exhaust gas emissions during inspection or maintenance
- DD ENV 1451-2-2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Guidance for the assessment of conformity
- 18/30386195 DC BS EN 12566-6. Small wastewater treatment systems for up to 50 PT - Part 6. Prefabricated treatment units for septic tank effluent
- BS ISO 16183:2002 Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
- BS EN 12056-4:2000 Gravity drainage systems inside buildings - Wastewater lifting plants - Layout and calculation
- BS EN 295-3:2012 Vitrified clay pipe systems for drains and sewers. Test methods
- 19/30392436 DC BS ISO 17479 AMD1. Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
- BS ISO 26367-2:2017 Guidelines for assessing the adverse environmental impact of fire effluents. Methodology for compiling data on environmentally significant emissions from fires
- BS ISO 6460-3:2007+A2:2022 Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption - Fuel consumption measurement at a constant speed
- BS EN 12566-6:2013 Small wastewater treatment systems for up to 50 PT. Prefabricated treatment units for septic tank effluent
- BS EN 12566-6:2016 Small wastewater treatment systems for up to 50 PT. Prefabricated treatment units for septic tank effluent
Indonesia Standards, Pre-discharge of wastewater
Yunnan Provincial Standard of the People's Republic of China, Pre-discharge of wastewater
- DB5301/T 49-2021 Indirect discharge limits of nitrogen and phosphorus pollutants from industrial enterprises wastewater
SE-SIS, Pre-discharge of wastewater
- SIS SS 3638-1990 Plastics pipes — Sealing rings of thermoplastic elastomers ITPE) for plastic discharge, drainage and sewage pipe systems
- SIS SMS 2731-1968 Fittings oj grey iron for waste water Single branches 87,5° for thin jloor frame work
- SIS SMS 2732-1968 Fittings of grey iron for waste water Single branches 45° for thin jloor jrame work
American Society for Testing and Materials (ASTM), Pre-discharge of wastewater
- ASTM F1673-10(2021)e1 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
- ASTM F1673-10 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
- ASTM F1412-16 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
- ASTM D5013-89(2003) Standard Practices for Sampling Wastes from Pipes and Other Point Discharges
- ASTM F1412-22 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
- ASTM C913-16 Standard Specification for Precast Concrete Water and Wastewater Structures
- ASTM D3311-08 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
- ASTM D3311-11 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
- ASTM A888-21a Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
- ASTM F1499-17 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
- ASTM F14-80(2000) Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal
- ASTM F14-80(2015) Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal
- ASTM F1499-22 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
- ASTM F2135-01 Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
- ASTM F2135-01(2017) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
- ASTM F2135-01(2012) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
- ASTM F2135-01(2017)e1 Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
- ASTM D5926-96 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
- ASTM F1673-04 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
- ASTM D5737-95(2006) Standard Guide for Methods for Measuring Well Discharge
- ASTM D5737/D5737M-14 Standard Guide for Methods for Measuring Well Discharge
- ASTM D3311-02 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
- ASTM D3311-02e1 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
- ASTM D3311-06a Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
- ASTM D3311-06 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
- ASTM D3311-09a Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
- ASTM D3311-11(2016) Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
- ASTM D3311-17 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
- ASTM D5926-04 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
- ASTM D5926-15 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
- ASTM D2665-02a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
- ASTM D2665-20 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
- ASTM D5013-89(1998) Standard Practices for Sampling Wastes from Pipes and Other Point Discharges
- ASTM D5013-89(2009) Standard Practices for Sampling Wastes from Pipes and Other Point Discharges
- ASTM D5013-18 Standard Practices for Sampling Wastes from Pipes and Other Point Discharges
- ASTM D5013-16 Standard Practices for Sampling Wastes from Pipes and Other Point Discharges
- ASTM D6917-03 Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)
- ASTM D3311-17(2021) Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
- ASTM F1673-95 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
- ASTM F1673-02 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
- ASTM F1673-04(2009) Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
- ASTM F1673-10(2016) Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
- ASTM C1440-17 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
- ASTM D2665-78 Standard Specification for Poly(inyl Chloride) (PVC) Plastic Drain, Waste, And Vent Pipe And Fittings
- ASTM D2665-91 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
- ASTM D2665-91a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
- ASTM D2665-91b Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
- ASTM D2665-08 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
- ASTM D2665-08a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
- ASTM D2665-08b Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
- ASTM F3371-19 Standard Specification for Polyolefin Pipe and Fittings for Drainage, Waste, and Vent Applications
- ASTM D5926-01 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
- ASTM D5926-11 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
- ASTM D5926-15(2020) Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
- ASTM D2661-14e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
- ASTM F2618-21 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
- ASTM F2618-19 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
- ASTM F2618-09(2014) Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
Professional Standard - Ocean, Pre-discharge of wastewater
- HY/T 129-2010 Evaluation method for water quality impact of seawater comprehensive utilization project wastewater discharge into sea area
CZ-CSN, Pre-discharge of wastewater
- CSN IEC 761-5:1993 Equipment for continuously monitoring radioactivity in gaseous effluents Part 5: Specific requirements for tritium effluent monitors
- CSN IEC 761-2:1992 Equipment for continuously monitoring radioactivity in gaseous effluents Part 2: Specific requirements for aerosol effluent monitors
- CSN IEC 761-3:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 3: Specific requirements for noble gas effluent monitors
- CSN IEC 761-1:1992 Equipment for continuously monitoring radioactivity in gaseous effluents Part 1: General requirements
- CSN IEC 761-6:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 6: Specific requirements for transuranic aerosol effluent monitors
- CSN 75 6406-1996 Wastewater discharge and treatment from health facilities
- CSN IEC 761-4:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 4: Sepcific requirements for iodine monitors
- CSN 83 0917-1977 Protection of water against petroleum matters. Oily water eewerage and treatment
- CSN EN 12056-4 ZZ1-2003
Japanese Industrial Standards Committee (JISC), Pre-discharge of wastewater
- JIS B 8008-2:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions at site
- JIS B 8008-1:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
- JIS D 0108:1985 Glossary of terms relating to control of air pollutions from automobile emissions
- JIS B 8008-1:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate emissions
- JIS B 8008-11:2008 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
- JIS B 8008-2:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
- JIS B 8008-3:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
- JIS B 8008-9:2004 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
IN-BIS, Pre-discharge of wastewater
Society of Automotive Engineers (SAE), Pre-discharge of wastewater
- SAE J1094-2011 Constant Volume Sampler System for Exhaust Emissions measurement
- SAE J1094A-1978 CONSTANT VOLUME SAMPLER SYSTEM FOR EXHAUST EMISSIONS MEASUREMENT
- SAE J1094-1992 Constant Volume Sampler System for Exhaust Emissions Measurement, Information Report June 1992
Standard Association of Australia （SAA）, Pre-discharge of wastewater
American National Standards Institute （ANSI), Pre-discharge of wastewater
- ANSI/NSF 350-1(i4r2)-2013 Wastewater treatment systems - Onsite residential and commercial graywater treatment systems for subsurface discharge
- ANSI/NSF 350-1(i4r3)-2013 Wastewater treatment systems - Onsite residential and commercial graywater treatment systems for subsurface discharge
- ANSI/ASTM F1412:2009 Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
- ANSI/ASSE 1008-2006 Performance Requirements for Reisdential Food Waste Disposer Units
- ANSI/NSF 350-1(i5)-2013 Onsite residential and commercial graywater treatment systems for subsurface discharge
- ANSI/NSF 350-1-2011 Onsite residential and commercial graywater treatment systems for subsurface discharge
- ANSI/NSF 350-1(i1)-2011 Onsite residential and commercial graywater treatment systems for subsurface discharge
- ANSI/NSF 350-1-2012 Onsite Residential and Commercial Graywater Treatment Systems for Subsurface Discharge
- ANSI/ASTM F1673:2010 Specification For Polyvinylidene Fluoride (Pvdf) Corrosive Waste Drainage Systems
- ANSI/NSF 350-1(i3)-2012 Wastewater treatment systems - Onsite residential and commercial graywater treatment systems for subsurface discharge
- ANSI/ASTM D3311:2011 Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
- ANSI/ANS 55.1-1992 Solid Radioactive Waste Processing System for Light Water Cooled Reactor Plants
- ANSI Z4.3-1995 Sanitation - Nonsewered Waste-Disposal Systems - Minimum Requirements
- ANSI Z4.3-2016 Sanitation �C Non-sewered Waste-Disposal Systems: Minimum Requirements
- ANSI N42.18-2004 Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in Effluents
- ANSI/AWWA C512-2015 Air-Release@ Air/Vacuum@ and Combination Air Valves for Water and Wastewater Service
未注明发布机构, Pre-discharge of wastewater
- DIN EN ISO 8178-1:1996 Reciprocating internal combustion engines, Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
- BS EN 1293:1999 General requirements for components used in pneumatically pressurized discharge pipes , drains and sewers
- BS ISO 8178-10:2002(2003) Reciprocating internal combustion engines — Exhaust emission measurement — Part 10 : Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
- BS ISO 16183:2002(2003) Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
Association of German Mechanical Engineers, Pre-discharge of wastewater
- VDI 6006-2008 "Pressure surges in drinking-water installations - Causes, noise emissions and prevention"
- VDI 3460 Blatt 2-2007 Emission control - Energy conversion in thermal solid waste treatment
- VDI 2462 Blatt 2-2011 Measurement of gaseous emissions - Determination of sulphur trioxide in water vapour containing exhaust gas - Condensation method
- VDI 3475 Blatt 3-2006 Emission control - Mechnical-biological treatment facilities for municipal solid waste
- VDI 2095 Blatt 2-2014 Emission control - Storage, handling, treatment of mixed construction-site and demolition waste, bulky waste, and commercial waste
- VDI 2310 Blatt 38-2008 Maximum immission values - Maximum immission levels for copper for the protection of livestock and foods derived from them
- VDI 2283-2008 Emission control - Preparation plants for ready-mix asphalt (asphalt mixing plants)
- VDI 3862 Blatt 8-2015 Measurement of gaseous emissions - Measurement of formaldehyde in the exhaust gas of combustion engines - FTIR method
- VDI 3481 Blatt 2-1998 Gaseous emission measurement - Determination of gaseous organic carbon in waste gases - Adsorption on silica gel
- VDI 2301-1993 Emission control; incineration of solid wastes from hospitals and other public health facilities
- VDI 2095 Blatt 1-2011 Emission control - Treatment of mineral construction-site and demolition waste - Stationary and mobile demolition waste recycling facilities
- VDI 3861 Blatt 2-2008 Stationary source emissions - Measurement of inorganic fibrous particles in exhaust gas - Scanning electron microscopy method
IX-UIC, Pre-discharge of wastewater
Canadian Standards Association (CSA), Pre-discharge of wastewater
- CSA B70-06-2006 Cast Iron Soil Pipe, Fittings, and Means of Joining Tenth Edition
- CSA B602-2016 +Errata-2017 Mechanical couplings for drain, waste, and vent pipe and sewer pipe
- CSA B602-2020 Mechanical couplings for drain, waste, and vent pipe and sewer pipe
- CSA N292.3-08-2008 Management of lowand intermediate-level radioactive waste First Edition
- CSA B602-99-CAN/CSA-1999 Mechanical Couplings for Drain, Waste, and Vent Pipe and Sewer Pipe Third Edition; General Instruction No 1; Update No 3
Federal Aviation Administration (FAA), Pre-discharge of wastewater
YU-JUS, Pre-discharge of wastewater
- JUS C.J1.421-1987 ?ast iron wastand soilpipes and fittings vvith socket. Technical requirements
- JUS C.J1.430-1987 ?ast iron vvaste and soil pipes and fittings with socket. Pipes. Shapes and dlmensions'
- JUS C.J1.429-1987 ?ast iron wast and soil pipes and fittings with socket. Sockets. Shapes and dimensions
- JUS C.J1.440-1987 ?ast iron Waste and soilpipes and fittings with socket. Bends. Shapesand dimensions^
- JUS C.J1.460-1987 ?ast iron vvaste and soil pipes and fittings with socket. Taper bends. Shapes and dimensions
PT-IPQ, Pre-discharge of wastewater
American Society of Mechanical Engineers (ASME), Pre-discharge of wastewater
中华人民共和国环境保护部, Pre-discharge of wastewater
- GB 13456-1992 Discharge standard of water pollutants for iron and steel industry
Professional Standard - Nuclear Industry, Pre-discharge of wastewater
- EJ/T 272.1-1985 Analytical method for cadmium in uranium mining and metallurgy wastewater
- EJ/T 272.2-1985 Analytical method for chromium in uranium mining and metallurgy wastewater
- EJ/T 272.4-1985 Analytical method for lead in uranium mining and smelting waste water
- EJ/T 272.3-1985 Analytical method for arsenic in uranium mining and metallurgy wastewater
AT-ON, Pre-discharge of wastewater
- ONORM M 6204-1977 Specifications for the requirements for waste water to be discharged front water treatment plants
- ONORM S 2605-2-1995 Treatment of radioactive waste water from nuclear medicine facilities (diagnosis, therapy)
- OENORM EN 16429-2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
- ONORM M 6205-1977 Specifications for the requirements for waste water to be discharged from dairy plants
- ONORM M 9451-1988 Emission limits forair contaminants from the cement industries
- ONORM M 6209-1984 Specification for the requirements for waste water to be discharged from cooling Systems
- ONORM M 6227-1983 Specifications for the requirements for waste water to be discharged from steam boilers
- ONORM M 6223-1990 Requirements for the characteristics of waste water to be discharged from textile finishing plants
- ONORM S 2605-1-1995 Treatment of radioactive waste water from industry, commerce, science, reserach
- ONORM M 6226-1986 Requirements for the characteristics ofwaste water to be discharged front paper and cardboard plants
- ONORM M 6207-1981 Requirements for the characteristics of waste water to be discharged from breweries and malthouses
- ONORM L 5226-1989 Irrigation equipment; test methods of emitters for drip irrigation Systems
- ONORM M 6202-1981 Requirements for the characteristics ofwaste water to be discharged front iron-producing and -processing plants
U.S. Environmental Protection Agency (U.S. EPA), Pre-discharge of wastewater
US-CFR-file, Pre-discharge of wastewater
- CFR 14-34.23-2013 Aeronautics and Space. Part34:Fuel venting and exhaust emission requirements for turbine engine powered airplanes. Section34.23:Exhaust emission standards for engines manufactured on and after july 18, 2012.
- CFR 40-86.1823-08-2014 Protection of Environment. Part86:Control of emissions from new and in-use highway vehicles and engines. Section86.1823-08:Durability demonstration procedures for exhaust emissions.
NL-NEN, Pre-discharge of wastewater
- NEN 7038-1981 ABS fittings for pipes for soil and waste discharge systems inside buildings
CH-SNV, Pre-discharge of wastewater
- SN EN 16429-2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
ZA-SANS, Pre-discharge of wastewater
- SANS 8770:2008 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)
- SANS 52566-1:2004 Small wastewater treatment systems for up to 50 PT Part 1: Prefabricated septic tanks
KR-KS, Pre-discharge of wastewater
- KS K ISO 18325-2017 Geosynthetics－Test method for the determination of water discharge capacity for prefabricated vertical drains
- KS B ISO 7842-2018(2023) Automatic steam traps — Determination of discharge capacity — Test methods
North Atlantic Treaty Organization Standards Agency, Pre-discharge of wastewater
- STANAG 4167-1982 NATO POLLUTANT DISCHARGE CONNECTION FOR SEWAGE AND FOR OILY WATER
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Pre-discharge of wastewater
- ASHRAE BN-97-17-2-1997 New Threshold Exhaust Flow Rates for Capture and Containment of Cooking Effluent
- ASHRAE TO-98-23-4-1998 Prediction of Short-Term and Long-Term VOC Emissions from SBR Bitumen-Backed Carpet under Different Temperatures
PL-PKN, Pre-discharge of wastewater
- PN-EN 16429-2021-08 E Stationary source emissions -- Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
TH-TISI, Pre-discharge of wastewater
- TIS 1727-1998 Road vehicles.measurement methods for exhaust gas emissions during inspection or maintenace
HU-MSZT, Pre-discharge of wastewater
BE-NBN, Pre-discharge of wastewater
NATO - North Atlantic Treaty Organization, Pre-discharge of wastewater
- ANEP-94-2019 NATO POLLUTANT DISCHARGE CONNECTION FOR SEWAGE AND FOR OILY WATER (ED A@ Ver 1)
The American Road & Transportation Builders Association, Pre-discharge of wastewater
- AASHTO R 73-2016 Standard Practice for Evaluation of Precast Concrete Drainage Products
- AASHTO M 245-2000 Standard Specification for Corrugated Steel Pipe, Polymer-Precoated, for Sewers and Drains
- AASHTO M 245-2016 Standard Specification for Corrugated Steel Pipe, Polymer-Precoated, for Sewers and Drains
AASHTO - American Association of State Highway and Transportation Officials, Pre-discharge of wastewater
- M 245-2000 Standard Specification for Corrugated Steel Pipe@ Polymer-Precoated@ for Sewers and Drains