ZH
RU
ES

Lithium battery curve

Lithium battery curve, Total:236 items.

In the international standard classification, Lithium battery curve involves: Industrial automation systems, Equipment for the chemical industry, Electrical wires and cables, Electrical accessories, Electrical equipment for working in special conditions, Electrical engineering in general, Galvanic cells and batteries, Services, Testing of metals, Electronic components in general, Electrical and electronic testing, Surface treatment and coating, Radiocommunications, Components and accessories for telecommunications equipment, Electromechanical components for electronic and telecommunications equipment, Vocabularies, Electricity. Magnetism. Electrical and magnetic measurements, Resistors, Materials for the reinforcement of composites, Wind turbine systems and other alternative sources of energy, Aerospace electric equipment and systems, Mathematics, Power transmission and distribution networks, Electronic tubes, Rotating machinery, Thermodynamics and temperature measurements, Telecommunication systems, Analytical chemistry, Paints and varnishes, Mechanical testing, Rectifiers. Convertors. Stabilized power supply, Fruits. Vegetables, Rubber and plastics products, Air quality, Hand-held tools, Optics and optical measurements, Electric road vehicles, Insulating materials, Nuclear energy engineering, Medical equipment, Optoelectronics. Laser equipment, Flexible drives and transmissions, Semiconductor devices, Rubber, Conducting materials.

Professional Standard - Machinery, Lithium battery curve

JB/T 3973-1999 Electric jig saws
JB/T 7704.6-1995 Test method for electroplating solution Determination of polarization curve
JB/T 10696.2-2007 Test methods for determining mechanical, physical and chemical properties of electric cables and wires Part 2: Flexing test for flexible cables and wires
JB/T 10696.3-2007 Test methods for determining mechanical, physical and chemical properties of electric cables and wires Part 3: Bending test
JB/T 4278.3-1993 Rubber plastic wire and cable test equipment verification method flexural test device
JB/T 4278.3-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 3: Flexing test device

Group Standards of the People's Republic of China, Lithium battery curve

T/QGCML 411-2022 Lithium battery anode material intelligent production line
T/CMIF 163-2022 Intelligent production line of ternary cathode materials for lithium battery
T/GDMES 0014-2020 Spiral mixing automatic production line for lithium ion battery paste
T/SZAACN 00001-2020 General technical requirement of lithium-ion cells for wireless headset
T/CASME 770-2023 General requirements for lithium ion cylindrical cell assembly lines for electric vehicles
T/GDID 1054-2022 Specification for static debugging of power lithium battery coating production line
T/CI 035-2022 Calibration method of magnification of X-ray detection equipment for lithium ion battery
T/GDMES 0043-2023 Requirements for lithium battery formation and capacitance testing based on microgrid DC bus
T/CASME 768-2023 Specification for production safety for cylindrical lithium-ion battery production lines
T/CEEMA 002-2020 Technical specification for wind turbine power curve verification
T/CEEMA 03001-2023 Technical specification for confirmation of functional power curves for wind turbines

Japanese Industrial Standards Committee (JISC), Lithium battery curve

JIS E 2223:1957 Curve ears (for trolley bus)
JIS E 2222:1957 Curve hangers (for trolley bus)
JIS E 2226:1957 Curve runners (for trolley bus)
JIS B 1857-1:2001 Curvilinear toothed synchronous belt drive systems for general power transmission -- Part 1: Belt
JIS B 1857-1:2015 Curvilinear toothed synchronous belt drive systems for general power transmission -- Part 1: Belt
JIS B 1857-2:2001 Curvilinear toothed synchronous belt drive systems for general power transmission -- Part 2: Pulley
JIS B 1857-2:2015 Curvilinear toothed synchronous belt drive systems for general power transmission -- Part 2: Pulley

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Lithium battery curve

GB/T 4909.6-1985 Test methods for bare wires--Bend test--Single bend test
GB/T 4909.5-1985 Test methods for bare wires--Bend test--Reverse bend test
GB/T 4909.5-2009 Test methods for bare wires.Part 5:Bend test.Reverse bend test
GB/T 4909.6-2009 Test methods for bare wires.Part 6:Bend test.Single bend test
GB/T 2951.21-1994 Test method for determining mechanical and physical properties of electric cables and wires. Flexing test for flexible cables and wires
GB/T 2951.23-1994 Test method for determining mechanical and physical properties of electric cables and wires. Bending test
GB/T 3789.19-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of frequency characteristic curve
GB/T 3789.13-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of static characteristic curve for common grid circuit
GB/T 3789.14-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of static characteristic curve for common cathode circuit
GB/T 42472-2023 Critical current measurement of retained critical current after double bending of silver-coated Bi-2223 superconducting wire at room temperature
GB/T 15247-1994 Electron probe quantitative analysis method of carbon in carbon steel and low alloy steel--Sensitivity curve method (detection limit method)
GB/T 15247-2008 Microbeam analysis.Electron probe microanalysis.Guidelines for determining the carbon content of steels using calibration curve method
GB 3883.11-2012 Safety of hand-held motor-operated electric tools.Part 2:Particular requirements for reciprocating saws(jig and sabre saws)
GB/T 3883.11-2012 Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for reciprocating saws(jig and sabre saws)
GB 3883.11-2005 Safety of hand-held motor-operated electric tools-Part 2:Particular requirements for reciprocating saws(Jig and Sabre Saws)
GB 3883.11-1991 Safety of hand-held motor-operated electric tools--Part 11: Particular requirements for electric reciprocating saws (jig and sabre saws)

AT-ON, Lithium battery curve

ONORM E 1363-1971 Apparalus for flexing lest of cords.

Defense Logistics Agency, Lithium battery curve

DLA A-A-55466 A VALID NOTICE 2-2006 CONNECTORS, ELECTRICAL, POWER, CRIMP TO WIRE SOCKETS
DLA A-A-55466 A VALID NOTICE 1-2001 CONNECTORS, ELECTRICAL, POWER, CRIMP TO WIRE SOCKETS
DLA A-A-55466 A-1994 CONNECTORS, ELECTRICAL, POWER, CRIMP TO WIRE SOCKETS
DLA A-A-55467 A VALID NOTICE 2-2006 CONNECTORS, ELECTRICAL, POWER, CRIMP TO WIRE, SPLIT PIN
DLA A-A-55467 A VALID NOTICE 1-2001 CONNECTORS, ELECTRICAL, POWER, CRIMP TO WIRE, SPLIT PIN
DLA A-A-55467 A-1994 CONNECTORS, ELECTRICAL, POWER, CRIMP TO WIRE, SPLIT PIN
DLA A-A-55468 A VALID NOTICE 2-2006 CONNECTORS, ELECTRICAL, POWER, CRIMP TO WIRE, SOLID PIN
DLA A-A-55468 A VALID NOTICE 1-2001 CONNECTORS, ELECTRICAL, POWER, CRIMP TO WIRE, SOLID PIN
DLA A-A-55468 A-1994 CONNECTORS, ELECTRICAL, POWER, CRIMP TO WIRE, SOLID PIN
DLA MIL-DTL-17 H SUPP 1-2006 CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERAL SPECIFICATION FOR
DLA MIL-DTL-17 H-2005 CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERAL SPECIFICATION FOR
DLA MS27473 REV M-2002 CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, CRIMP TYPE, BAYONET COUPLING, SERIES II
DLA DSCC-DWG-90038 REV C-2005 RESISTOR, FIXED, FILM, PRECISION, 0.25 WATT, POWER CURVE C
DLA DSCC-DWG-89088 REV E-2005 RESISTOR, FIXED, FILM, PRECISION, 0.1 WATT, POWER CURVE C
DLA DSCC-DWG-97009 REV A-2001 RESISTOR, FIXED, FILM, PRECISION, 0.3 WATT, POWER CURVE A
DLA DSCC-DWG-97010 REV A-2001 RESISTOR, FIXED, FILM, PRECISION, 0.3 WATT, POWER CURVE B
DLA DSCC-DWG-97011 REV A-2001 RESISTOR, FIXED, FILM, PRECISION, 0.15 WATT, POWER CURVE B
DLA MS27467 REV L (1)-2003 CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, CRIMP TYPE, BAYONET COUPLING, SERIES I
DLA MS27467 REV L-2002 CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, CRIMP TYPE, BAYONET COUPLING, SERIES I
DLA MS27480 REV G NOTICE 1-2004 CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, CRIMP TYPE, BAYONET COUPLING, SERIES II
DLA MS27480 REV G-2002 CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, CRIMP TYPE, BAYONET COUPLING, SERIES II
DLA MS27484 REV M-2002 CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, CRIMP TYPE, BAYONET COUPLING, EMI, SERIES II
DLA MS27473 REV M NOTICE 1-2004 CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, CRIMP TYPE, BAYONET COUPLING, SERIES II [Use In Lieu Of: DLA MS0027473 REV F]
DLA MS27661 REV E VALID NOTICE 1-2007 Connectors, Plug, Electrical, Crimp Type, Lanyard Release, Fail- Safe, Series I
DLA MS27661 REV E-2002 CONNECTORS, PLUG, ELECTRICAL, CRIMP TYPE, LANYARD RELEASE, FAIL-SAFE, SERIES I
DLA MS27484 REV M NOTICE 1-2004 CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, CRIMP TYPE, BAYONET COUPLING, EMI, SERIES II [Use In Lieu Of: DLA MS0027484 REV G]
DLA MS3471 REV E-2007 CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES II, CRIMP TYPE, CABLE CONNECTING, BAYONET COUPLING, CLASSES A, L and W

Taiwan Provincial Standard of the People's Republic of China, Lithium battery curve

CNS 9815-1983 Method of Test for Wires Breakage of Appliance
CNS 14905-11-2005 Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for reciprocating saws (jig and sabre saws)
CNS 14905.11-2005 Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for reciprocating saws (jig and sabre saws)

International Telecommunication Union (ITU), Lithium battery curve

ITU-R HDBK HCR-1991 Manual De Curvas De Propagacion Del Las Ondas Radioelectricas Sobre La Superficie De La Tierra (Study Group 5)
ITU-R M.631-1 FRENCH-1992 USE OF HYPERBOLIC MARITIME RADIONAVIGATION SYSTEMS IN THE BAND 283.5-315 kHz UTILISATION DE SYST萂ES DE RADIONAVIGATION MARITIME HYPERBOLIQUES DANS LA BANDE 283,5-315 kHz
ITU-R P.528-2 FRENCH-1986 Propagation curves for aeronautical mobile and radionavigation services using the VHF, UHF and SHF bands COURBES DE PROPAGATION DANS LES BANDES D'ONDES M蒚RIQUES, D蒀IM蒚RIQUES ET CENTIM蒚RIQUES POUR LE SERVICE MOBILE A蒖ONAUTIQUE ET LE SERVICE DE RADION
ITU-T E.800 SUPP 2-1988 Curves showing the relation between the traffic offered and the number of circuits
ITU-R P.528-2-1986 Propagation Curves for Aeronautical Mobile and Radionavigation Services Using the VHF, UHF and SHF Bands - Section 5D - Aspects Relative to the Terrestrial Broadcasting and Mobile Services
ITU-R P.528-3-2012 Propagation curves for aeronautical mobile and radionavigation services using the VHF, UHF and SHF bands
ITU-R P.528-2012 Propagation curves for aeronautical mobile and radionavigation services using the VHF, UHF and SHF bands
ITU-T SERIE E.800 SUPP 2 FRENCH-1988 Curves showing the relation between the traffic offered and the number of circuits required
ITU-T SERIE E.800 SUPP 2 SPANISH-1988 Curves showing the relation between the traffic offered and the number of circuits required
ITU-T SERIES E.800 SUPP 2-1988 Curves showing the relation between the traffic offered and the number of circuits required
ITU-R M.631-1-1992 USE OF HYPERBOLIC MARITIME RADIONAVIGATION SYSTEMS IN THE BAND 283.5-315 kHz

SE-SIS, Lithium battery curve

Nr 39-1992

German Institute for Standardization, Lithium battery curve

DIN 48045:1959-09 Power current overhead lines; bent insulator spindles
DIN VDE 0472-603:1989 Testing of cables, wires and flexible cords; bending behaviour
DIN 48051-1:1959-09 Power current overhead lines; bent insulator spindles, standard design
DIN 13322-1:1988 Electrical networks; concepts related to topology of electrical networks and theory of graphs
DIN 48051-3:1964-01 Power overhead lines; bent insulator spindles for screwing
DIN 41772 Beiblatt 1:1979-02 Static power convertors; semiconductor rectifier equipment, examples of characteristic curves for battery chargers
DIN 41772 Bb.1:1979 Static power convertors; semiconductor rectifier equipment, examples of characteristic curves for battery chargers
DIN 41776:1983 Static power convertors; semiconductor rectifier equipment with I characteristic for charging of batteries; requirements
DIN 41772:1979-02 Static power convertors; semiconductor rectifier equipment, shapes and letter symbols of characteristic curves
DIN 41772 Beiblatt 2:1979-02 Static power convertors; semiconductor rectifier equipment, examples of characteristic curves for equipment operating in parallel with batteries
DIN EN 60745-2-11:2008 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) (IEC 60745-2-11:2003, modified); German version EN 60745-2-11:2003 + A11:2007
DIN VDE 0282-14:2003 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 14: Cords for applications requiring high flexibility; German version HD 22.14 S2:2002
DIN 41775:1979 Static power convertors; semiconductor rectifier equipment with "W"-characteristic for charging of nickel/cadmium and nickel/iron batteries, requirements
DIN 41773-2:1982 Static power convertors; semiconductor rectifier equipment with IU characteristic for charging of nickel cadmium batteries; requirements

HU-MSZT, Lithium battery curve

CZ-CSN, Lithium battery curve

CSN ISO 7801:1994 Metallic materials. Wire. Reverse bend test

Indonesia Standards, Lithium battery curve

SNI 07-4611-1998 Reverse bend test for metallic material wires

ZA-SANS, Lithium battery curve

SANS 7801:2003 Metallic materials - Wire - Reverse bend test

Aerospace Industries Association/ANSI Aerospace Standards, Lithium battery curve

AIA/NAS NAS 1662-1980 Contact - Pin, Electrical Connector, Crimp Type (Rev. 2)
AIA/NAS NAS 1663-1980 Contact - Socket, Electrical Connector, Crimp Type (Rev. 2)
AIA/NAS NAS 729-1981 Cable, Electrical, Flat Conductor, Flexible - 300 Volts, Copper (Rev. 1)

RU-GOST R, Lithium battery curve

GOST 12182.3-1980 Cables, wires and cords. Methods of control of bending resistance with twisting
GOST 27278-1987 Electromechanical radio components. Method of testing cable clamp strength to cable bending
GOST 12182.1-1980 Cables, wires and cords. Methods of multifold bendig resistance trough a roll system
GOST 19907-2015 Dielectric fabrics made of glass twisted complex threads. Specifications
GOST 19438.7-1975 Electron low power tubes; Measuring method for steepuess of characteristic
GOST R 50636-1994 Electric hand-held tools. Particular safety requirements and methods of testing jig and sabre saws
GOST 22002.2-1976 Ring bend cable terminals, with close tail, attached to conductor core. Construction and sizes
GOST IEC 60745-2-11-2014 Hand-held motor-operated electric tools. Safety. Part 2-11. Particular requirements for reciprocating saws (jig and sabre saws)

Professional Standard - Electron, Lithium battery curve

SJ/Z 1171-1977 Methods for determination of polarization curve of electroplating solution
SJ 2354.7-1983 Method of measurement for spectral response curve and spectral response range of PIN and avalanche photodiodes

Military Standard of the People's Republic of China-General Armament Department, Lithium battery curve

GJB 17.21-1984 Test methods for aviation wires and cables Low temperature bending test
GJB 38.30-1987 Receiver for long-range hyperbolic radio navigation system in conventional power submarine mooring and navigation test regulations

British Standards Institution (BSI), Lithium battery curve

PD IEC/TR 63091:2017 Study for the derating curve of surface mount fixed resistors. Derating curves based on terminal part temperature
BS EN 3373-014:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200 °C - Product standard
BS EN 50632-2-11:2016+A1:2021 Electric motor-operated tools. Dust measurement procedure - Particular requirements for jig and sabre saws
BS EN 50632-2-11:2016 Electric motor-operated tools. Dust measurement procedure. Particular requirements for jig and sabre saws
BS EN 60745-2-11+A1:2003 Hand-held motor-operated electric tools - Safety - Particular requirements for reciprocating saws (jig and sabre saws)
BS EN 60745-2-11:2010 Hand-held motor-operated electric tools. Safety. Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
BS ISO 16592:2012 Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
BS EN 60745-2-11:2003 Hand-held motor-operated electric tools - Safety - Particular requirements for reciprocating saws (jig and sabre saws)
BS EN 3373-008:2012 Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C. Product standard
BS EN 3373-007:2012 Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs. Product standard

American National Standards Institute （ANSI), Lithium battery curve

ANSI/IEEE C37.112:1996 Standard Inverse-Time Characteristic for Overcurrent Relays
ANSI/SCTE 39-2013 Test Method for Static Minimum Bending Radius for Coaxial Trunk, Feeder, and Distribution Cables
ANSI/IEEE 620:1997 Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines
ANSI/EIA 364-92:1997 Wire Bending Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors

International Organization for Standardization (ISO), Lithium battery curve

ISO 2625:1973 Copper and copper alloys — Reverse bend testing of wire
ISO 16592:2006 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
ISO 16592:2012 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method

Institute of Electrical and Electronics Engineers (IEEE), Lithium battery curve

IEEE 1459-2010 Definitions for the Measurement of Electric Power Quantities Under Sinusoidal, Nonsinusoidal, Balanced, or Unbalanced Conditions
IEEE Std 620-1996 IEEE Guide for the presentation of thermal limit curves for squirrel cage induction machines
IEEE 620-2022 IEEE Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines
IEEE Std 620-2022 IEEE Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines - Redline
IEEE 1459-2000 Trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions
IEEE P620/D6, November 2021 IEEE Draft Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines
IEEE P620/D2, April 2020 IEEE Draft Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines
IEEE P620/D5, October 2021 IEEE Draft Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines
IEEE P620/D3, August 2021 IEEE Draft Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines
IEEE P620/D4, September 2021 IEEE Draft Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines
IEEE Std 620-1987 IEEE Guide for Construction and Interpretation of Thermal Limit Curves for Squirrel-Cage Motors Over 500 hp
IEEE 620-1987 IEEE Guide for Construction and Interpretation of Thermal Limit Curves for Squirrel-Cage Motors Over 500 hp
ANSI/IEEE Std 620-1981 IEEE Trial Use Guide for Construction and Interpretation of Thermal Limit Curves for Squirrel-Cage Motors Over 500 hp
IEEE PC57.107/D3, July 2023 IEEE Draft Recommended Practice for Developing Short-Term Over excitation V/Hz Curves for Transformers Directly Connected to Generators

BR-ABNT, Lithium battery curve

ABNT MB-859-1980

国家能源局, Lithium battery curve

NB/T 10587-2021 Technical regulations for verification of power curve of wind farm units
NB/T 20439-2017 Guidelines for developing pressure-temperature limit curves for reactor pressure vessels in pressurized water reactor nuclear power plants

YU-JUS, Lithium battery curve

JUS N.N6.013-1984 Radiocommunications. Ground-wave propagation curves for freguencies between 10 kHz and 30 MHz
JUS N.N6.014-1984 Radiocommunications. VHF and UHF propagathn curves for the frequency range from 30 MHz to 1000 MHz used in the planning of broadcasting mrvica*

International Electrotechnical Commission (IEC), Lithium battery curve

IEC TR 63091:2017 Study for the derating curve of surface mount fixed resistors - Derating curves based on terminal part temperature
IEC 60745-2-11:2006 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
IEC 60745-2-11:2003 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
IEC 60745-2-11:1984 Safety of hand-held motor-operated electric tools. Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
IEC 60745-2-11:2008 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)

ES-AENOR, Lithium battery curve

UNE 20-561-1990

The Aluminum Association, Lithium battery curve

AA SSCC-1997 Stress-Strain-Creep- Curves for Aluminum Overhead Electrical Conductors

Society of Automotive Engineers (SAE), Lithium battery curve

SAE AS70991B-2011 Terminals: Lug and Splice, Crimp Style, Aluminum, for Aluminum Aircraft Wire
SAE J284-2021 Communication for Smart Charging of Plug-in Electric Vehicles using Smart Energy Profile 2.0
SAE J2847-2-2015 Communication for Smart Charging of Plug-in Electric Vehicles using Smart Energy Profile 2.0
SAE J2847-1-2013 Communication for Smart Charging of Plug-in Electric Vehicles using Smart Energy Profile 2.0
SAE J2847-3-2021 Communication for Smart Charging of Plug-in Electric Vehicles using Smart Energy Profile 2.0
SAE J2847-1-2019 Communication for Smart Charging of Plug-in Electric Vehicles using Smart Energy Profile 2.0
SAE J2847-6-2020 Communication for Smart Charging of Plug-in Electric Vehicles using Smart Energy Profile 2.0
SAE J2847-2013 Communication for Smart Charging of Plug-in Electric Vehicles using Smart Energy Profile 2.0

SAE - SAE International, Lithium battery curve

SAE AS70991C-2018 Terminals: Lug and Splice, Crimp Style, Aluminum, for Aluminum Aircraft Wire

Professional Standard - Chemical Industry, Lithium battery curve

HG/T 4543-2013 Water treatment chemicals.Determination of corrosion inhibition performance.Potentiodynamic polarization method

ECIA - Electronic Components Industry Association, Lithium battery curve

EIA-364-92-1997 TP-92 Wire Bending Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors
364-92-1997 TP-92 Wire Bending Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors

National Association of Corrosion Engineers (NACE), Lithium battery curve

NACE RP0197-1997 Standard Format for Computerized Electrochemical Polarization Curve Data Files
NACE RP0197-2004 Standard Format for Computerized Electrochemical Polarization Curve Data Files Item No. 21080

Electronic Components, Assemblies and Materials Association, Lithium battery curve

ECA EIA-364-92-1997 TP-92 Wire Bending Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Lithium battery curve

SERIES E.800 SUPP 2-1988 Curves showing the relation between the traffic offered and the number of circuits required

Electronic Components, Assemblies and Materials Association, Lithium battery curve

ECA 364-92-1997 TP-92 Wire Bending Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors
ECA SP 5127-2007 Wire Bending Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors To be published as ANSI/EIA/ECA-364-92

TR-TSE, Lithium battery curve

TS 2090-1975 BASIC ENVIRONMENTAL TESTING PROCEDURES FOR ALECTRONIC COMPONENTS AND ELECTRONIC EQUIPMENT TEST Fc:VIBRATION (SINUSOIDAL)

Association Francaise de Normalisation, Lithium battery curve

NF C68-112/A11*NF EN 61386-22/A11:2011 Conduit systems for cable management - Part 22 : particular requirements - Pliable conduit systems
NF C75-132-2-11*NF EN 50632-2-11:2016 Electric motor-operated tools - Dust measurement procedure - Part 2-11 : particular requirements for jig and sabre saws
NF C75-132-2-11/A1*NF EN 50632-2-11/A1:2021 Electric motor-operated tools - Dust measurement procedure - Part 2-11 : particular requirements for jig and sabre saws
NF X21-007:2008 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steel using a calibration curve method.
NF C31-888-24*NF EN IEC 61788-24:2018 Superconductivity - Part 24 : critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires

European Association of Aerospace Industries, Lithium battery curve

AECMA PREN 3373-010-2006 Aerospace series Terminal lugs and in-line splices for crimping on electric conductors Part 010: Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 癈 for metric and inch stud series Product standard Edition
AECMA PREN 3373-011-2006 Aerospace series Terminal lugs and in-line splices for crimping on electric conductors Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 癈 for metric and inch stud series Product standard Editi
AECMA PREN 3373-012-2003 Aerospace Series Terminal Lugs and In-line Splices for Crimping on Electric Conductors Part 012: In-line Splices, Insulated and Sealed, for Crimping on Copper Conductors, Temperature up to 150 Degrees C Product Standard Edition P 1
AECMA PREN 3373-013-2003 Aerospace Series Terminal Lugs and in-line Splices for Crimping on Electric Conductors Part 013: In-line Splices, Insulated and Moisture Resistant, for Crimping on Copper Conductors, temperature up to 260 degrees C Product Standard Edition P 1
AECMA PREN 3373-001-1996 Aerospace Series Terminal Lugs and In-Line Splices for Crimping on Electric Cables Part 001: Technical Specification Edition P 1
AECMA PREN 3373-001-2006 Aerospace Series Terminal Lugs and In-Line Splices for Crimping on Electric Conductors Part 001: Technical Specification Edition P 3
AECMA PREN 3373-001-1999 Aerospace Series Terminal Lugs and In-Line Splices for Crimping on Electric Conductors Part 001: Technical Specification Edition P 2

BE-NBN, Lithium battery curve

American Society for Testing and Materials (ASTM), Lithium battery curve

ASTM D1830-17 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM F2771-10(2016) Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM D1830-99(2012) Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM D4882-97 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM D4882-17 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM F2771-09 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM B913-00e1 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
ASTM B913-00 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors

未注明发布机构, Lithium battery curve

BS EN 50144-2-10:2001 Safety of hand - held electric motor operated tools — Part 2 - 10 : Particular requirements for jig saws

PL-PKN, Lithium battery curve

PN E88606-1989 Electrical relays Vibration, shock, bump and seismic tests on measuring relays and protection equipment Yibration tests (sinusoidal)

Canadian Standards Association (CSA), Lithium battery curve

CSA C22.2 No.0.12-M1985-1985(R2007) Wiring Space and Wire Bending Space in Enclosures for Equipment Rated 750 V or Less First Edition
CSA C22.2 No.0.12-M1985 UPD 2-1985 Wiring Space and Wire Bending Space in Enclosures for Equipment Rated 750 V or Less First Edition
CSA T568.1-1-2005 Commercial building telecommunications cabling standard — Part 1: General requirements — Addendum 1 — Minimum 4-pair UTP and 4-pair ScTP patch cable bend radius (First Edition)
CSA C22.2 NO.0.12-M1985-1985 Wiring Space and Wire Bending Space in Enclosures for Equipment Rated 750 V or Less (First Edition; General Instruction No. 2: July 1985)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Lithium battery curve

IEEE 620-1981 Trial-Use Guide for Construction and Interpretation of Thermal Limit Curves for Squirrel-Cage Motors Over 500 HP

Standard Association of Australia （SAA）, Lithium battery curve

AS/NZS 60745.2.11:2009

Professional Standard - Nuclear Industry, Lithium battery curve

EJ/T 918-1994 Guidelines for the formulation of pressure-temperature limit curves for reactor pressure vessels in pressurized water reactor nuclear power plants

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Lithium battery curve

ITU-R M.631-1986 Use of Hyperbolic Maritime Radionavigation Systems in the Band 283.5-315 kHz - Section 8D - Radiodetermination@ Global Maritime Distress and Safety System and Related Subjects

Korean Agency for Technology and Standards (KATS), Lithium battery curve

KS C IEC 61262-4-2003(2018)
KS D ISO 16592:2011 Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
KS D ISO 16592-2011(2016) Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
KS D ISO 16592-2011(2021) Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
KS C IEC 60745-2-11:2007 Hand－held motor－operated electric tools－Safety－Part 2－11：Particular requirements for reciprocating saws(jig and sabre saws)
KS C IEC 61788-24:2021 Superconductivity — Part 24: Critical current measurement — Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires

European Committee for Electrotechnical Standardization（CENELEC）, Lithium battery curve

EN 50632-2-11:2016 Electric motor-operated tools - Dust measurement procedure - Part 2-11: Particular requirements for jig and sabre saws
EN 60745-2-11:2010 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
EN IEC 61788-24:2018 Superconductivity - Part 24: Critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires

ES-UNE, Lithium battery curve

UNE-EN 50632-2-11:2016/A1:2021 Electric motor-operated tools - Dust measurement procedure - Part 2-11: Particular requirements for jig and sabre saws (Endorsed by Asociación Española de Normalización in February of 2022.)
UNE-EN 50632-2-11:2016 Electric motor-operated tools - Dust measurement procedure - Part 2-11: Particular requirements for jig and sabre saws (Endorsed by AENOR in September of 2016.)

United States Navy, Lithium battery curve

NAVY MS90485 REV E-1974 DIES, CRIMPING TOOL, FOR USE WITH MS20659 UNINSULATED WIRE TERMINALS AND EXTERNAL POWER PLUG SOCKET CONTACTS (FOR WIRE SIZES 8 THROUGH 4/0)
NAVY MIL-I-22444 C NOTICE 2-2000 INSULATION TAPE, ELECTRICAL, SELF-BONDING, SILICONE RUBBER TREATED BIAS WEAVE OR SINUSOIDAL WEAVE GLASS, CABLE SPLICING, NAVAL SHIPBOARD
NAVY MIL-I-22444 C VALID NOTICE 1-1988 INSULATION TAPE, ELECTRICAL, SELF-BONDING, SILICONE RUBBER TREATED BIAS WEAVE OR SINUSOIDAL WEAVE GLASS, CABLE SPLICING, NAVAL SHIPBOARD
NAVY MIL-I-22444 C-1968 INSULATION TAPE, ELECTRICAL, SELF-BONDING, SILICONE RUBBER TREATED BIAS WEAVE OR SINUSOIDAL WEAVE GLASS, CABLE SPLICING, NAVAL SHIPBOARD

Danish Standards Foundation, Lithium battery curve

DS/EN 60745-2-11:2010 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)

AENOR, Lithium battery curve

UNE-EN 60745-2-11:2011 Hand-held motor-operated electric tools - Safety -- Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)

TIA - Telecommunications Industry Association, Lithium battery curve

TIA/EIA-568-B.1-1-2001 Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius (Addendum 1 to TIA/EIA-568-B.1)

VE-FONDONORMA, Lithium battery curve

COVENIN 717-1974

KR-KS, Lithium battery curve

KS C IEC 61788-24-2021 Superconductivity — Part 24: Critical current measurement — Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires

European Committee for Standardization (CEN), Lithium battery curve

EN 3373-007:2012 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 007: Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs - Product standard