ZH
RU
ES

Xishuang mixing equipment

Xishuang mixing equipment, Total:352 items.

In the international standard classification, Xishuang mixing equipment involves: Raw materials for rubber and plastics, Rubber, Construction equipment, Paint coating equipment, Distribution and vending machines, Kitchen equipment, Equipment for the chemical industry, Equipment for petroleum and natural gas industries, Air quality, Dentistry, Rails and railway components, Linear and angular measurements, Shipbuilding and marine structures in general, Resistors, Road engineering, Vocabularies, Agricultural machines, implements and equipment, Construction materials, Medical equipment, Construction of railways, Graphical symbols, Domestic electrical appliances in general, Animal feeding stuffs, Farm buildings, structures and installations, Sports equipment and facilities, Water quality, Petroleum, petroleum products and natural gas handling equipment, Protection against dangerous goods, Fluid storage devices, Valves, Protection against fire, Installations in buildings, Electromechanical components for electronic and telecommunications equipment, Electronic component assemblies, Power stations in general, Equipment for the rubber and plastics industries, Switchgear and controlgear, Aerospace electric equipment and systems, Languages used in information technology, Radiocommunications, Electrical and electronic testing, Plant and equipment for the food industry, Road vehicle systems, Earth-moving machinery, Solar energy engineering, Wind turbine systems and other alternative sources of energy, Surface treatment and coating, Sterilization and disinfection, Analytical chemistry, Wastes, Bearings, Electrical accessories, Test conditions and procedures in general, Electrical equipment for working in special conditions, Domestic, commercial and industrial heating appliances, Components and accessories for telecommunications equipment, Electrical wires and cables, Integrated circuits. Microelectronics, Environmental testing, Protection against excessive pressure, Electrical engineering in general, Insulating fluids, Acoustics and acoustic measurements, Telecommunication terminal equipment.

Defense Logistics Agency, Xishuang mixing equipment

DLA SMD-5962-87535 REV F-2008 MICROCIRCUIT, HYBRID, LINEAR, DUAL REDUNDANT, REMOTE TERMINAL UNIT (RTU)
DLA SMD-5962-87617 REV E-2005 MICROCIRCUIT, HYBRID, DIGITAL, HIGH VOLTAGE DRIVERS
DLA SMD-5962-96887 REV F-2005 MICROCIRCUIT, HYBRID, LINEAR, MIL-STD-1553, BC/RTU/MT, MULTIPLEXED TERMINAL

US-FCR, Xishuang mixing equipment

FCR COE RPMAS 49220-1978 MIXING CHAMBERS AND EQUIPMENT

IN-BIS, Xishuang mixing equipment

TH-TISI, Xishuang mixing equipment

TIS 1848-1999 Rubber test mixes.preparation, mixing and vulcanization.equipment and procedures
TIS 1982-2000 Dental equipment.mercury and alloy mixers and dispensers
TIS 2009-2000 Safety requirement for electrical equipment for measurement, control and laboratory use.part 2: particular requirements for laboratory equipment for mixing and stirring

International Organization for Standardization (ISO), Xishuang mixing equipment

ISO 2393:2008 Rubber test mixes - Preparation, mixing and vulcanization - Equipment and procedures
ISO 2393:2014 Rubber test mixes - Preparation, mixing and vulcanization - Equipment and procedures
ISO 2393:1973 Rubber test mixes; Preparation, mixing and vulcanization; Equipment and procedures
ISO 8282:1994 Dental equipment - Mercury and alloy mixers and dispensers
ISO 15642:2003 Road construction and maintenance equipment - Asphalt mixing plants - Terminology and commercial specifications
ISO 18779:2005 Medical devices for conserving oxygen and oxygen mixtures - Particular requirements
ISO 19711-1:2018 Building construction machinery and equipment — Truck mixers — Part 1: Terminology and commercial specifications

Association Francaise de Normalisation, Xishuang mixing equipment

NF T43-006*NF ISO 2393:2014 Rubber test mixes - Preparation, mixing and vulcanization - Equipment and procedures
NF T43-006:1997 Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures.
NF ISO 2393:2014 Mélanges d'essais à base de caoutchouc - Mélangeage, préparation et vulcanisation - Appareillage et modes opératoires
NF T35-007:2005 Coating plants - Combined booths - Safety requirements.
NF F51-105:1989 RAILWAY FIXED EQUIPMENT. STEEL TIE-BAR FOR REINFORCED CONCRETE TWIN-BLOCS SLEEPERS.
NF EN ISO 8282:1997 Matériel dentaire - Mélangeurs et doseurs distributeurs de mercure et d'alliages
NF P98-142:2022 Matériel de construction et d'entretien des routes - Fabrication des mélanges - Contrôle de fabrication des mélanges bitumineux avec utilisation d'un système d'acquisition des données
NF S52-301:2009 Gymnastic equipment - Parallel bars and combination asymmetric/parallel bars - Requirements and test methods including safety.
NF M88-520:1981 Leakage detection equipment with lowering of pressure for double-walled underground storage containers for category 2 flammable liquids. Principle. Construction. Test.
NF S91-310*NF EN ISO 8282:1997 Dental equipment. Mercury and alloy mixers and dispensers.
NF P98-728-1:2013 Road construction and maintenance equipment - Hot mix asphalt production facilities - Definition of constituent equipment and characteristics, verification of initial settings - Part 1 : bituminous mixture continuous mode production facilities
NF P98-728-2:2013 Road construction and maintenance equipment - Hot mix asphalt production facilities - Definition of constituent equipment and characteristics, verification of initial settings - Part 2 : bituminous mixture discontinuous mode production facilities
NF P98-818-38*NF EN 12697-38:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38 : common equipment and calibration
NF S95-186:2005 Medical devices for conserving oxygen and oxygen mixtures - Particular requirements.
NF P98-798:1998 Highways winter maintenance plant and highways side equipment maintenance. Hydroseeders. Technical specifications and performances.
NF D18-214*NF EN 817:2008 Sanitary tapware - Mechanical mixers valves (PN 10) - General technical specifications
NF C64-471-4*NF EN 62271-4:2014 High-voltage switchgear and controlgear - Part 4 : handling procedures for sulphur hexafluoride (SF6) and its mixtures
NF P98-846-50*NF EN 13286-50:2005 Unbound and hydraulically bound mixtures - Part 50 : method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
NF EN IEC 60480:2019 Spécifications pour la réutilisation de l'hexafluorure de soufre (SF6) et des mélanges contenant du SF6 dans le matériel électrique
NF P98-732-1:2001 Road construction and maintenance equipment - Manufacture of mixtures and quality control - Part 1 : mixing plants for hydraulic binder treated or untreated materials
NF P98-728-2:2004 Road construction and maintenance equipment - Hot-setting hydrocarbon materials production plants - Definition of the components, of the levels and verification of the initial settings - Part 2 : discontinuous (batch) bituminous mixing plants.
NF P98-728-1:2004 Road construction and maintenance equipment - Hot-setting hydrocarbon materials production plants - Definition of the components, of the levels and verification of the initial settings - Part 1 : continuous bituminous mixing plants.
NF P98-734:1994 Road construction and maintenance equipment. Granular mix spreader. Sliding mould machines designed to pour ciment concrete. Terminology. Requirement.
NF P98-712:1993 Road construction and maintenance equipement. Soils stabilization or retread process : spreader plants of binder a pulvi-mixer. Terminology.
NF EN IEC 60376:2018 Spécification de la qualité technique de l'hexafluorure de soufre (SF6) et des gaz complémentaires employés dans ses mélanges pour utilisation dans les appareils électriques
NF P98-772-1:2004 Road construction and maintenance equipment - Data acquisition modules for granular mix fabrication plants - Description and functional specifications - Part 1 : continuous production module.
NF C42-020-2-051/A11*NF EN IEC 61010-2-051/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051 : particular requirements for laboratory equipment for mixing and stirring
NF C42-020-2-051*NF EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051 : particular requirements for laboratory equipment for mixing and stirring
NF C42-020-2-051*NF EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051 : particular requirements for laboratory equipment for mixing and stirring
NF C42-722:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051 : particular requirements for laboratory equipment for mixing and stirring.
NF D35-376:1992 Heating. Continuous or intermittent heating appliances, decoration appliances, wood burning, mixed or convertible appliances. Definitions. Specifications. Tests.
NF EN 12697-38:2004 Mélanges bitumineux - Méthodes d'essai pour mélanges hydrocarbonés à chaud - Partie 38 : appareillage commun, calibrage et étalonnage
NF C42-722:1996 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-051 : particular requirements for laboratory equipment for mechanical mixing and stirring.
NF EN IEC 61010-2-051:2021 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-051 : exigences particulières pour appareils de laboratoire utilisés pour mélanger et agiter
NF EN IEC 61010-2-051/A11:2021 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 2-051 : exigences particulières pour appareils de laboratoire utilisés pour mélanger et agiter
NF D18-203:2017 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
NF E63-612-1/IN1:2008 Plastics and rubber machines - Reaction moulding machines - Part 1 : safety requirements for metering and mixing units.
NF D36-308:2008 Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures
NF D36-308/IN1:2008 Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures.
NF P98-772-1:2013 Road construction and maintenance equipment - Data acquisition module for granular mixture production plants - Description and functional requirements - Part 1 : module for continuous production
NF P98-772-2:2013 Road construction and maintenance equipment - Data acquisition module for granular mixture production plants - Description and functional requirements - Part 2 : module for discontinuous production
NF C27-601*NF EN IEC 60376:2018 Specification of technical grade sulfur hexafluoride (SF6) and complementary gases to be used in its mixtures for use in electrical equipment
NF P98-105:2011 Pavement bases - Continuous manufacture of mixtures - Production control of granular materials and sands bound with cementitions binders or of untreated granular materials and sands in a continuous mixing plant
XP Z89-380*XP I-ETS 300380:1998 Universal Personal Telecommunication (UPT). Access devices. Dual Tone Multi Frequency (DTMF) sender for acoustical coupling to the microphone of a handset telephone.

Danish Standards Foundation, Xishuang mixing equipment

DS/ISO 2393:1980 Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures
DS/EN ISO 8282:1997 Dental equipment - Mercury and alloy mixers and dispensers
DS/EN 12697-38:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration
DS/EN ISO 18779:2005 Medical devices for conserving oxygen and oxygen mixtures - Particular requirements
DS/EN 13286-50:2005 Unbound and hydraulically bound mixtures – Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
DS/ISO 14617-12:2006 Graphical symbols for diagrams - Part 12: Devices for separating, purification and mixing
DS/EN 61010-2-051:2005 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
DS/EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
DS/IEC/TR 61010-3-051:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-051: Conformity verification report for IEC 61010-2-051, Particular requirements for laboratory equipment for mixing and stirring
DS/I-ETS 300380:1996 Universal Personal Telecommunication (UPT) - Access devices - Dual Tone Multi Frequency (DTMF) sender for acoustical coupling to the microphone of a handset telephone

AENOR, Xishuang mixing equipment

UNE-ISO 2393:2013 Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures
UNE-EN ISO 8282:1997 DENTAL EQUIPMENT. MERCURY AND ALLOY MIXERS AND DISPENSERS. (ISO 8282:1994).
UNE-EN 12697-38:2006 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration
UNE-EN 13286-50:2006 Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
UNE-EN 62271-4:2014 High-voltage switchgear and controlgear - Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures
UNE-EN ISO 18779:2005 Medical devices for conserving oxygen and oxygen mixtures - Particular requirements (ISO 18779:2005)
UNE-EN 61010-2-051:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-051: Particular requirements for laboratory equipment for mixing and stirring

Korean Agency for Technology and Standards (KATS), Xishuang mixing equipment

KS M ISO 2393:2012 Rubber test mixes－Preparation, mixing and vulcanization－Equipment and procedures
KS M ISO 2393-2017(2022) Rubber test mixes－Preparation, mixing and vulcanization－Equipment and procedures
KS M ISO 2393:2017 Rubber test mixes－Preparation, mixing and vulcanization－Equipment and procedures
KS F 2356-2013 Requirements of mixing plants for hot mix asphalt
KS P ISO 8282:2013 Dental equipment－Mercury and alloy mixers and dispensers
KS V 7817-1998(2011) Application of fuel oil blending system
KS C 5116-2003(2018)
KS C 6412-1992(1997) FIXED CARBON COMPOSITION RESISTORS FOR USE IN ELECTRONIC EQUIPMENT
KS C 6412-1980 FIXED CARBON COMPOSITION RESISTORS FOR USE IN ELECTRONIC EQUIPMENT
KS B ISO 15642:2004 Road construction and maintenance equipment-Asphalt mixing plants-Terminology and commercial specifications
KS B ISO 15642:2014 Road construction and maintenance equipment — Asphalt mixing plants — Terminology and commercial specifications
KS C IEC 61010-2-051:2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
KS C IEC 61010-2-51:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use-Part 2-51:Particular requirements for laboratory equipment for mixing and stirring
KS C IEC 61010-2-51:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-51: Particular requirements for laboratory equipment for mixing and stirring
KS C IEC 61020-3-2-2002(2012) Electromechanical switches for use in electronic equipment－Part 3：Sectional specification for in－line package switches－Section 2：Detail specification for dual in－line package(DIP), switches, raised an

RU-GOST R, Xishuang mixing equipment

GOST ISO 2393-2016 Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures
GOST 30263-1996 Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures
GOST R 54554-2011 Standard rubber compounds. Materials, equipment and procedures for mixing and preparing vulcanized sheets
GOST R 54554-2011(2018) Standard rubber compounds. Materials, equipment and procedures for mixing and preparing vulcanized sheets
GOST R 53252-2009 Fire-fighting equipment. Foammixers. General technical requirements. Methods of testing
GOST ISO 18650-2-2016 Building construction machinery and equipment. Concrete mixers. Part 2. Procedure for examination of mixing efficiency
GOST EN 454-2013 Food processing machinery and equipment. Planetary mixers. Safety and hygiene requirements
GOST EN 13389-2013 Food processing machinery and equipment. Mixers with horizontal shafts. Safety and hygiene requirements
GOST IEC 61010-2-051-2014 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-051. Particular requirements for laboratory equipment for mixing and stirring
GOST IEC 61010-2-051-2011 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-051. Particular requirements for laboratory equipment for mixing and stirring
GOST R IEC 748-11-1-2001 Semiconductor devices integrated circuits. Part 11. Section 1. Internal visual examination for semiconductor integrated circuits excluding hybrid circuits
GOST R 53189-2008 Environmental dynamic test metods for machines, instruments and other technical articles. Mixed mode vibration tests
GOST 31849-2012 Industrial gas-using equipment. Air heaters with air-flue gases mixing. General technical requirements
GOST R 51625-2000 Industrial gas-using equipment. Air heaters with air-flue gases mixing. General technical requirements

KR-KS, Xishuang mixing equipment

KS M ISO 2393-2017 Rubber test mixes－Preparation, mixing and vulcanization－Equipment and procedures
KS C IEC 61010-2-051-2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-051: Particular requirements for laboratory equipment for mixing and stirring

未注明发布机构, Xishuang mixing equipment

BS ISO 2393:2014(2015) Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures

Japanese Industrial Standards Committee (JISC), Xishuang mixing equipment

JIS K 6299:2012 Rubber test mixes -- Preparation, mixing and vulcanization -- Equipment and procedures
JIS A 8704-1:2009 Road construction and maintenance equipment -- Asphalt mixing plants -- Part 1: Terminology and commercial specifications
JIS C 6406:1990 Fixed carbon composition resistors for use in electronic equipment
JIS K 6299:1994 Rubber test mixes -- Preparation, mixing and vulcanization -- Equipment and procedures
JIS A 8704-2:2009 Road construction and maintenance equipment -- Asphalt mixing plants -- Part 2: Standard form of specifications and testing methods
JIS A 8704:1994 Standard form of specifications and testing methods of batch type asphalt mixing plants

CZ-CSN, Xishuang mixing equipment

CSN ON 69 1031-1963
CSN 62 1425-1983 Raw rubbers. Preparation and vulcanization of rubber compounds. Equipment
CSN ON 69 1013-1963
CSN ON 52 0002-1967

European Committee for Standardization (CEN), Xishuang mixing equipment

prEN 914-1992 Gymnastic equipment; parallel bars and combination asymmetric/parallel bars
EN 12697-38:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration
EN 13230-3:2016 Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers
EN 13230-3:2002 Railway applications Track Concrete sleepers and bearers Part 3: Twin-block reinforced sleepers
EN 13355:2004 Coating plants - Combined booths - Safety requirements (Incorporates Amendment A1: 2009)
EN ISO 8282:1997 Dental Equipment - Mercury and Alloy Mixers and Dispensers ISO 8282:1994
EN ISO 18779:2005 Medical devices for conserving oxygen and oxygen mixtures - Particular requirements
prEN 12697-38-2020 Bituminous mixtures - Test methods - Part 38: Common equipment and calibration
EN 13286-5-2003E Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
EN 13286-50:2004 Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
EN 13286-50-2004E Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
CWA 18002:2023 Best practices for hybridization and injection moulding of rigid control units on in-mould flexible devices
EN 13785:2005 Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures (Incorporates

RO-ASRO, Xishuang mixing equipment

STAS 8365/8-1983 Rubber EQUIPEMENTES PROCEDURES FOR MIXING AND VULCANIZING RUBBER TESTMIXES
STAS 11792-1980 Equipment for moulding sand preparation SELF-HARDENING MIXTURE MACHINES Main parameters
STAS 8732-1980 Sanitary fittings MIXING BATTERIES NP G Types and main dimensions
STAS 11601-1981 Chemical industry equipment IMPELLERS FOR VERTICAL MIXERS Main dimensions
STAS 11404-1980 Woven fabrics for antiacid protective equipment POLYPROPYLENE AND WOOLBLENDED CLOTH
STAS 10688-1982 Equipment for chemical industry VERTICAL CYLINDRICAL TANKS WITH MIXER Types and main dimensions
STAS SR 10869-2000 Equipment for the chemical industry Vertical cylindrical vessels with mixer General technical requirements of quality

British Standards Institution (BSI), Xishuang mixing equipment

BS EN 13355:2005 Coating plants - Combined booths - Safety requirements
BS EN ISO 8282:1997 Dental equipment. Mercury and alloy mixers and dispensers
14/30314465 DC BS EN 62956. Hybrid electric double layer capacitors for use in electric and electronic equipment. Test methods for electrical characteristics
BS EN ISO 18779:2005 Medical devices for conserving oxygen and oxygen mixtures - Particular requirements
BS ISO 14617-12:2004 Graphical symbols for diagrams - Devices for separating, purification and mixing
BS ISO 14617-12:2002 Graphical symbols for diagrams - Devices for separating, purification and mixing
BS EN 914:2008 Gymnastic equipment - Parallel bars and combination asymmetric/parallel bars - Requirements and test methods including safety
BS EN 817:1998 Sanitary tapware - Mechanical mixers (PN 10) - General technical specifications
BS EN 1612-1:1997+A1:2008 Plastics and rubber machines - Reaction moulding machines - Part 1.Safety requirements for metering and mixing units
BS EN 13286-50:2005 Unbound and hydraulically bound mixtures - Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
BS EN 13286-50:2004 Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
BS PD IEC/TS 62257-9-4:2016 Recommendations for renewable energy and hybrid systems for rural electrification. Integrated systems. User installation
BS EN IEC 61010-2-051:2021+A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for mixing and stirring
BS EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Flowing mixed gas corrosion test
BS EN 61010-2-051:2003 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for mixing and stirring
BS ISO 6281:2007 Plain bearings. Testing under conditions of hydrodynamic and mixed lubrication in test rigs
20/30426162 DC BS EN 12697-38. Bituminous mixtures. Test methods - Part 38. Common equipment and calibration
BS IEC 61010-3-051:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-051, particular requirements for laboratory equipment for mixing and stirring
20/30420495 DC BS EN IEC 62271-4. High-voltage switchgear and controlgear. Part 4. Handling procedures for gases and gas mixtures for interruption and insulation
19/30392449 DC BS EN IEC 62271-4. High-voltage switchgear and controlgear. Part 4. Handling procedures for gases and gas mixtures for interruption and insulation
BS EN 60728-7-1:2005 Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Physical (PHY) layer specification
20/30419178 DC BS EN 61010-2-051 AMD1. Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051. Particular requirements for laboratory equipment for mixing and stirring
BS EN 60695-11-2:2004 Fire hazard testing - Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance
BS EN 60695-11-2:2003 Fire hazard testing - Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance
BS DD IEC/TS 62257-9-4:2006 Recommendations for small renewable energy and hybrid systems for rural electrification - Integrated system - User installation
BS EN 60695-11-2:2014 Fire hazard testing. Test flames. 1 kW nominal pre-mixed flame: Apparatus, confirmatory test arrangement and guidanc
BS EN ISO 3822-2:1996 Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Mounting and operating conditions for draw-off taps and mixing valves
BS EN 60728-7-2:2005 Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Media access control (MAC) layer specification

American National Standards Institute （ANSI), Xishuang mixing equipment

ANSI/ASHRAE 32.2-2003 Methods of Testing for Rating Pre-Mix and Post-Mix Beverage Dispensing Equipment
ANSI/ASAE S303.4-2007 Test Procedure for Solids-Mixing Equipment for Animal Feeds
ANSI/ASAE S303.4-2007(R2010) Test Procedure for Solids-Mixing Equipment for Animal Feeds
ANSI/ASSE 1071-2012 Performance Requirements for Temperature Actuated Mixing Valves for Plumbed Emergency Equipment
ANSI/EIA 540DA00:1991 Dual-In-Line Package Sockets for Use in Electronic Equipment, Blank Detail Specification for
ANSI/SCTE 84-3-2009 HMS Inside Plant Management Information Base (MIB) SCTE-HMS-HE-FAN-MIB
ANSI/EIA 540DBAA:1994 Detail Specification for Decoupling Capacitor Dual-In-Line Package Sockets for Use in Electronic Equipment
ANSI/IEEE 1076.1.1:2004 Standard VHDL Analog and Mixed-Signal Extensions - Packages for Multiple Energy Domain Support
ANSI/SCTE 85-4-2009 HMS Common Inside Plant Management Information Base(MIB) SCTE-HMS-HE-OPTICAL-SWITCH-MIB
ANSI Z245.41-2008 Equipment Technology and Operations for Wastes and Recyclable Materials Facilities for the Processing of Commingled Recyclable Materials — Safety Requirements
ANSI/SCTE 83-3-2009 Hybrid Fiber/Coax Inside Plant Status Monitoring SCTE-HMS-HMTS-MIB Management Information Base (MIB) Definition
ANSI/SCTE 25-2-2008 Hybrid Fiber Coax Outside Plant Status Monitoring - Media Access Control (MAC) Layer Specification v1.0
ANSI Z245.41-1997 Equipment Technology and Operations for Wastes and Recyclable Materials - Facilities for the Processing of Commingled Recyclable Materials - Safety Requirements
ANSI/SCTE 37-2010 Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-ROOTS Management Information Base (MIB) Definition

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Xishuang mixing equipment

ASHRAE 32.2-2003 Methods of Testing for Rating Pre-Mix and Post-Mix Beverage Dispensing Equipment
ASHRAE 32.2-1997 Methods of Testing for Rating Pre-Mix and Post-Mix Soft-Drink Vending and Dispensing Equipment
ASHRAE 91-1976 Methods of Testing Pre-Mix and Post-Mix Soft Drink Vending and Dispensing Equipment; (Reaffirmation of ANSI/ASHRAE 91-1976 with Minor Editorial Revisions) (R 1989)

Professional Standard - Chemical Industry, Xishuang mixing equipment

HG/T 5107-2016 Post-mixing equipment for thermosetting powder coatings

Group Standards of the People's Republic of China, Xishuang mixing equipment

T/CCMA 0045-2016 Auxiliary Stationary RAP Recycling Plant
T/QGCML 902-2023 Raw material mixing equipment for shampoo production
T/CCMA 0067-2018 Safety mark of asphalt mixing plant
T/ZACA 041-2022 Mixed signal semiconductor device test equipment
T/CCMA 0068-2018 Special vibrating screen of asphalt mixing plant
T/CCMA 0066-2018 Environmental emission limits of asphalt mixing plant
T/NXJX 032-2022 Equipment of intelligent total mixed ration（TMR）feeding and processing
T/CCMA 0119-2021 Asphalt mixing plant—Batch mixer
T/CCMA 0121-2021 Test and evaluation method for comprehensive energy consumption of Asphalt mixing plant
T/CAPE 10102-2022 Concrete mixture performance test equipment management regulations
T/CSEE 0203.2-2021 Commission regulation of VSC-HVDC equipments — Part 2: 500kV hybrid high-voltage direct current circuit breaker (HVDC circuit breaker)
T/CSEE 0204.2-2021 Operation and Maintenance Regulations for Flexible DC Equipment Part 2: 500 kV Hybrid DC Circuit Breakers
T/GSEE 0009-2023 Uhv Mixed Multiterminal HVDC Project Quality Control Specification on The Equipment

工业和信息化部/国家能源局, Xishuang mixing equipment

JB/T 13169-2017 Solid-liquid mixed organic waste separation equipment
JB/T 13170-2017 Solid-liquid mixed organic waste extrusion pulping equipment

Standard Association of Australia （SAA）, Xishuang mixing equipment

AS 1683.19:2001 Methods of test for rubber - Preparation, mixing and vulcanization of rubber test mixes - Equipment and procedures
AS IEC 62271.4:2015 High-voltage switchgear and controlgear, Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures

American Society for Testing and Materials (ASTM), Xishuang mixing equipment

ASTM D995-95 Standard Specification for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
ASTM D6926-20 Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
ASTM F1084-90(2002) Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
ASTM F1084-90(2001) Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
ASTM F1084-90(1995)e1 Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
ASTM F1084-08(2018) Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
ASTM F1084-08(2013) Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
ASTM D3182-89(2001)e1 Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D3182-89(2001) Standard Practice for Rubber8212;Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D3182-89(1994) Standard Practice for Rubber8212;Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D3182-89(2006) Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D3182-21 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D3182-21a Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D995-95b Standard Specification for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
ASTM D995-95b(2002) Standard Specification for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
ASTM F1084-08 Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
ASTM D3182-15 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D3182-16 Standard Practice for Rubber&x2014;Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D3182-15a Standard Practice for Rubber&x2014;Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D3182-07 Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D3182-07(2012) Standard Practice for Rubbermdash;Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D7227/D7227M-17 Standard Practice for Rapid Drying of Compacted Asphalt Mixture Specimens Using Vacuum Drying Apparatus
ASTM D7227/D7227M-22 Standard Practice for Rapid Drying of Compacted Asphalt Mixture Specimens Using Vacuum Drying Apparatus

BE-NBN, Xishuang mixing equipment

German Institute for Standardization, Xishuang mixing equipment

DIN EN ISO 8282:1997 Dental equipment - Mercury and alloy mixers and dispensers (ISO 8282:1994); German version EN ISO 8282:1997
DIN EN 536:1999 Road construction machines - Asphalt mixing plants - Safety requirements; German version EN 536:1999
DIN EN ISO 18779:2005 Medical devices for conserving oxygen and oxygen mixtures - Particular requirements (ISO 18779:2005); German version EN ISO 18779:2005
DIN EN 12697-38:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004
DIN EN 1111:1998 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification; German version EN 1111:1998
DIN EN 914:2009 Gymnastic equipment - Parallel bars and combination asymmetric/parallel bars - Requirements and test methods including safety; English version of DIN EN 914:2009-01
DIN 2142:1977 Office machines; line spacings and character spacings for numeric and alphanumeric office machines
DIN EN 13286-50:2005-03 Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction; German version EN 13286-50:2004
DIN 28052-5:1997 Chemical apparatus - Surface treatment of concrete components in process plants using non-metallic materials - Part 5: Combined coatings
DIN EN 13286-50:2005 Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction; German version EN 13286-50:2004
DIN EN 12697-38:2004-10 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004 / Note: To be replaced by DIN EN 12697-38 (2020-12).
DIN EN 12697-38:2020 Bituminous mixtures - Test methods - Part 38: Common equipment and calibration; German and English version 12697-38:2020
DIN EN 61010-2-051:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (IEC 61010-2-051:2003); German version EN 61010-2-051:2003
DIN EN 12238:2001-12 Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application; German version EN 12238:2001
DIN EN 62271-4:2014 High-voltage switchgear and controlgear - Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures (IEC 62271-4:2013); German version EN 62271-4:2013
DIN 24539-2:1985-05 Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; double anchor plates; dimensions, designations, mounting depth

国家市场监督管理总局、中国国家标准化管理委员会, Xishuang mixing equipment

GB/T 17808-2021 Road construction and maintenance machinery and equipment—Asphalt mixing plant

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Xishuang mixing equipment

GB/T 17808-2010 Road construction and road maintenance machinery and equipment.Asphalt mixing plant
GB/T 25641-2010 Road construction and road maintenance machinery and equipment.Asphalt hot recycling plant
GB/T 30752-2014 Road construction and road maintenance machinery and equipment.Asphalt mixing plants.Safety requirements
GB/T 7920.11-2006 Road construction and maintenance equipment Asphalt mixing plants Terminology and commercial specifications
GB/T 25642-2010 Road construction and road maintenance machinery and equipment.Asphalt-aggregate mixture transfer
GB 4793.3-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for laboratory equipment for mixing and stirring
GB/T 28392-2012 Road construction and road maintenance machinery and equipment.Hot-air recirculating-type asphalt pavement hot recycling and maintenance machine
GB 4793.3-2008 Safety requirements for electrical equipment for measurement,control,and laboratory use.Part3:Particular requirements for laboratory equipment for mixing and stirring
GB/T 11318.6-1996 Equipments and components used in cabled distribution systems primarily intended for television and sound signals. Part 6: Grneric specifications for combiners

工业和信息化部, Xishuang mixing equipment

JB/T 14118-2021 Construction Machinery and Equipment Waste Concrete Crushing and Screening Combined Equipment
JB/T 13713-2019 Road construction and maintenance machinery and equipment indoor asphalt mixture production line

Professional Standard - Traffic, Xishuang mixing equipment

JT/T 270-2002 Batch type asphalt mixing plant

交通运输部, Xishuang mixing equipment

JT/T 270-2019 Forced intermittent asphalt mixture mixing equipment

Lithuanian Standards Office , Xishuang mixing equipment

LST EN ISO 8282:2002 Dental equipment - Mercury and alloy mixers and dispensers (ISO 8282:1994)
LST EN 12697-38-2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration
LST EN 13286-50-2005 Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
LST EN ISO 18779:2005 Medical devices for conserving oxygen and oxygen mixtures - Particular requirements (ISO 18779:2005)
LST EN 61010-2-051-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (IEC 61010-2-051:2003)

AASHTO - American Association of State Highway and Transportation Officials, Xishuang mixing equipment

M 156-2013 Standard Specification for Requirements for Mixing Plants for Hot-Mixed@ Hot-Laid Bituminous Paving Mixtures
M 156-1997 Standard Specification for Requirements for Mixing Plants for Hot-Mixed@ Hot-Laid Bituminous Paving Mixtures
M156-1989 Standard Specification for Requirements for Mixing Plants for Hot-Mixed@ Hot-Laid Bituminous Paving Mixtures (R 1993)
M156-1997 Standard Specification for Requirements for Mixing Plants for Hot-Mixed@ Hot-Laid Bituminous Paving Mixture (Nineteenth Edition; ASTM D995-95b)

CEN - European Committee for Standardization, Xishuang mixing equipment

EN 13230-3:2009 Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers

Professional Standard - Machinery, Xishuang mixing equipment

JB/T 11936-2014 Technical specification for complete sets of additive premix feed processing equipment
JB/T 11676-2013 Road construction and road maintenance machinery and equipment.Coal burning system of asphalt mixing plant

Underwriters Laboratories (UL), Xishuang mixing equipment

UL 1517-2000 UL Standard for Safety Hybrid Personal Flotation Devices (Second Edition)
UL 1517-2007 UL Standard for Safety Hybrid Personal Flotation Devices (Third Edition)
UL 61010A-2-051 BULLETIN-2005 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for Mixing and Stirring
UL 8400 BULLETIN-2023 UL Standard for Safety Virtual Reality, Augmented Reality and Mixed Reality Technology Equipment
UL 61010A-2-051-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for Mixing and Stirring (First Edition)
UL 1517 BULLETIN-2011 UL Standard for Safety Hybrid Personal Flotation Devices (COMMENTS DUE: March 21@ 2011)
UL 1517 BULLETIN-2015 UL Standard for Safety Hybrid Personal Flotation Devices (COMMENTS DUE: July 23@ 2015)
UL 1517 BULLETIN-2017 UL Standard for Safety Hybrid Personal Flotation Devices (COMMENTS DUE: April 17@ 2017)
UL 1517 BULLETIN-2007 UL Standard for Safety Hybrid Personal Flotation Devices (COMMENTS DUE: March 20@ 2007)
UL 1517 BULLETIN-2012 UL Standard for Safety Hybrid Personal Flotation Devices (COMMENTS DUE: November 04@ 2012)
UL 87A BULLETIN-2007 OUTLINE OF INVESTIGATION FOR POWER-OPERATED DISPENSING DEVICES FOR GASOLINE/ETHANOL BLENDS WITH ETHANOL CONTENT GREATER THAN 15 PERCENT
UL 61010A-2-051 (ND)-2002 National Differences For UL 61010A-2-051 Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for Mixing and Stirring (First Edition)
UL 61010-2-051 BULLETIN-2015 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use – Part 2-051: Particular Requirements for Laboratory Equipment for Mixing and Stirring
UL 1517-1984 UL Standard for Safety Hybrid Personal Flotation Devices (First Edition; Reprint with Revisions Through and Including October 08@ 1992)
UL 61010-2-051-2015 UL Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-051: Particular Requirements for Laboratory Equipment for Mixing and Stirring (Third Edition)
UL 61010-2-051-2019 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use – Part 2-051: Particular Requirements for Laboratory Equipment for Mixing and Stirring (Fourth Edition)

National Metrological Verification Regulations of the People's Republic of China, Xishuang mixing equipment

JJG(交通) 071-2006 V.R.of Asphalt Mixture and Cement Concrete Mixing Device Measure System

Professional Standard - Energy, Xishuang mixing equipment

NB/T 10679-2021 Technical requirements for hybrid direct current transmission control and protection equipment

NO-SN, Xishuang mixing equipment

NS 4470-1977 Machinery and equipment for bakeries - Sanitary requirements to liquid ferment and continuous mix processing equipment

The Society for Protective Coatings (SSPC), Xishuang mixing equipment

SSPC PA 14-2012 Application of Thick Film Polyurea and Polyurethane Coatings to Concrete and Steel Using Plural-Component Equipment

SSPC - The Society for Protective Coatings, Xishuang mixing equipment

PA 14-2012 Application of Thick Film Polyurea and Polyurethane Coatings to Concrete and Steel Using Plural-Component Equipment

International Telecommunication Union (ITU), Xishuang mixing equipment

ITU-T L.47 FRENCH-2000 Access facilities using hybrid fibre/copper networks
ITU-T L.47 SPANISH-2000 Access facilities using hybrid fibre/copper networks
ITU-T L.47-2000 Access Facilities Using Hybrid Fibre/Copper Networks Series L: Construction Installation and Protection of Cables and Other Elements of Outside Plant Study Group 6

European Telecommunications Standards Institute (ETSI), Xishuang mixing equipment

ETSI TS 103 407-2016 Cross Platform Authentication for limited input hybrid consumer equipment (V1.1.1)
ETSI ETS 300 119-3-1994 Equipment Engineering (EE); European Telecommunication Standard for Equipment Practice Part 3: Engineering Requirements for Miscellaneous Racks and Cabinets
ETSI ETS 300 119-4-1994 Equipment Engineering (EE); European Telecommunication Standard for Equipment Practice Part 4: Engineering Requirements for Subracks in Miscellaneous Racks and Cabinets

ETSI - European Telecommunications Standards Institute, Xishuang mixing equipment

TS 103 407-2016 Cross Platform Authentication for limited input hybrid consumer equipment (V1.1.1)

American Association, Xishuang mixing equipment

ASSE 1071-2008 Performance Requirements for Temperature Actuated Mixing Valves For Plumbed Emergency Equipment

American Industrial Hygiene Association （AIHA), Xishuang mixing equipment

ASSE 1071-2012 Performance Requirements for Temperature Actuated Mixing Valves for Plumbed Emergency Equipment

HU-MSZT, Xishuang mixing equipment

U.S. Military Regulations and Norms, Xishuang mixing equipment

ARMY MIL-S-63256 C NOTICE 1-1998 SAFETY AND ARMING DEVICE, GUIDED MISSILE: M143 (M143E1) LOGIC CIRCUIT HYBRID FOR
ARMY MIL-S-63256 C (1)-1990 SAFETY AND ARMING DEVICE, GUIDED MISSILE: M143 (M143E1) LOGIC CIRCUIT HYBRID FOR
ARMY MIL-S-63256 C-1987 SAFETY AND ARMING DEVICE, GUIDED MISSILE: M143 (M143E1) LOGIC CIRCUIT HYBRID FOR

AT-ON, Xishuang mixing equipment

OENORM EN 12697-38-2021 Bituminous mixtures - Test methods - Part 38: Common equipment and calibration
ONORM S 3036-1995 Commercial catering equipment - Double jacketed boiling pans and quick boiling pans with pressure-free boiling space - Definitions, requirements, test specifications -Marking of conformity

Professional Standard - Electricity, Xishuang mixing equipment

DL/T 1986-2019 Technical specification for gas detection of sulfur hexafluoride mixed gas insulation equipment
DL/T 5834-2021 Asphalt mixture mixing system equipment

International Electrotechnical Commission (IEC), Xishuang mixing equipment

IEC 62271-4:2013 High-voltage switchgear and controlgear - Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures
IEC 60480:2019 Specifications for the re-use of sulphur hexafluoride (SF₆) and its mixtures in electrical equipment
IEC 61010-2-051:2018 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-051:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-051:1995 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-051:2005 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 60376:2018 Specification of technical grade sulphur hexafluoride (SF6) and complementary gases to be used in its mixtures for use in electrical equipment

European Committee for Electrotechnical Standardization（CENELEC）, Xishuang mixing equipment

EN 62271-4:2013 High-voltage switchgear and controlgear - Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures
EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
EN IEC 60376:2018 Specification of technical grade sulphur hexafluoride (SF6) and complementary gases to be used in its mixtures for use in electrical equipment

Institute of Electrical and Electronics Engineers (IEEE), Xishuang mixing equipment

IEEE 1076.1.1-2004 VHDL analog and mixed-signal extensions - Packages for multiple energy domain support
IEEE Std 2837-2023 IEEE Guide for Technical Requirements for Hybrid High-Voltage Direct Current Transmission Protection and Control Equipment
IEEE 2837-2023 IEEE Guide for Technical Requirements for Hybrid High-Voltage Direct Current Transmission Protection and Control Equipment
IEEE P2837 IEEE Draft Guide for Technical Requirements for Hybrid High-Voltage Direct-Current Transmission Protection and Control Equipment
IEEE P2837/D4.1, February 2023 IEEE Draft Guide for Technical Requirements for Hybrid High-Voltage Direct-Current Transmission Protection and Control Equipment

ES-UNE, Xishuang mixing equipment

UNE-EN IEC 60480:2020 Specifications for the re-use of sulphur hexafluoride (SF6) and its mixtures in electrical equipment
UNE-EN IEC 61010-2-051:2021/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Endorsed by Asociación Española de Normalización in October of 2021.)
UNE-EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Endorsed by Asociación Española de Normalización in October of 2021.)
UNE-EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Endorsed by AENOR in June of 2015.)
UNE-EN IEC 60376:2019 Specification of technical grade sulphur hexafluoride (SF6) and complementary gases to be used in its mixtures for use in electrical equipment

American Gear Manufacturers Association, Xishuang mixing equipment

AGMA 04FTM9-2004 Design of a High Ratio, Ultra Safe, High Contact Ratio, Double Helical Compound Planetary Transmission for Helicopter Applications
AGMA 06FTM10-2006 Fabrication, Assembly and Test of a High Ratio, Ultra Safe, High Contact Ratio, Double Helical Planetary Transmission for Helicopter Applications

The American Road & Transportation Builders Association, Xishuang mixing equipment

AASHTO M 156-1997 Standard Specification for Requirements for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
AASHTO M 156-1997(R2009) Standard Specification for Requirements for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
AASHTO M 156-2013 Standard Specification for Requirements for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures

PL-PKN, Xishuang mixing equipment

PN M68207-1991 Plastic and elastomeric materials processing machines. Batch mixer.Requirements and tests

Canadian Standards Association (CSA), Xishuang mixing equipment

CAN/CSA-Z18779-2008 Medical devices for conserving oxygen and oxygen mixtures - Particular requirements (First Edition)

Society of Automotive Engineers (SAE), Xishuang mixing equipment

SAE AIR7058-2023 High-Voltage DC Electromechanical, Solid State, and Hybrid Switching Devices in Aerospace Applications

US-CFR-file, Xishuang mixing equipment

CFR 33-149.330-2013 Navigation and navigable waters. Part149:Deepwater ports: design, construction, and equipment. Section149.330:When may a work vest or deck suit be substituted for a lifejacket?

GOSTR, Xishuang mixing equipment

GOST R 43.0.7-2011 Informational ensuring of equipment and operational activity. Hybrid intellectulized man - information interaction. General principles

Compressed Gas Association (U.S.), Xishuang mixing equipment

CGA P-34-2014 Safe handling of ozone-containing mixtures including the installation and operation of ozone-generating equipment

IECQ - IEC: Quality Assessment System for Electronic Components, Xishuang mixing equipment

PQC 82-1989 Semiconductors for Use in Electronic Equipment: Sectional Specification: Semiconductor Integrated Circuits Excluding Hybrid Circuits

CENELEC - European Committee for Electrotechnical Standardization, Xishuang mixing equipment

EN 61010-2-051:1995 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use Part 2-051: Particular Requirements for Laboratory Equipment for Mechanical Mixing and Stirring

ANSI - American National Standards Institute, Xishuang mixing equipment

Z245.41-1997 Equipment Technology and Operations for Wastes and Recyclable Materials - Facilities for the Processing of Commingled Recyclable Materials Safety Requirements (NW&RA)
Z245.41-2004 Equipment Technology and Operations for Wastes and Recyclable Materials --- Facilities for the Processing of Commingled Recyclable Materials – Safety Requirements (NW&RA)
Z245.41-2015 Equipment Technology and Operations for Wastes and Recyclable Materials Facilities for the Processing of Commingled Recyclable Materials — Safety Requirements (NW&RA)
Z245.41-2008 Equipment Technology and Operations for Wastes and Recyclable Materials Facilities for the Processing of Commingled Recyclable Materials — Safety Requirements (NW&RA)

AT-OVE/ON, Xishuang mixing equipment

OVE EN IEC 62271-4:2021 High-voltage switchgear and controlgear - Part 4: Handling procedures for gases and gas mixtures for interruption and insulation (IEC 17/1089/CDV) (english version)
OVE EN 61010-2-051/AA-2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Amendment) (english version)

IT-UNI, Xishuang mixing equipment

UNI 4189-1959

IEC - International Electrotechnical Commission, Xishuang mixing equipment

IEC TR 61010-3-051:1999 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 3-051: Conformity Verification Report for IEC 61010-2-051@ Particular Requirements for Laboratory Equipment for Mixing and Stirring (Edition 1.0)