ZH
RU
ES

Automatic Calorimeter Calibration

Automatic Calorimeter Calibration, Total:132 items.

In the international standard classification, Automatic Calorimeter Calibration involves: Metrology and measurement in general, Thermodynamics and temperature measurements, Measurement of force, weight and pressure, Analytical chemistry, Test conditions and procedures in general, Protection against fire, Equipment for the chemical industry, Installations in buildings, Air quality, Noise with respect to human beings, Acoustics and acoustic measurements, Equipment for petroleum and natural gas industries, Optics and optical measurements, Road vehicle systems, Electrical accessories, Automatic controls for household use, Powder metallurgy, Fasteners, Non-ferrous metals, Industrial furnaces, Earthworks. Excavations. Foundation construction. Underground works, Paper and board, Vibrations, shock and vibration measurements, Measurement of volume, mass, density, viscosity, Piezoelectric and dielectric devices, Raw materials for rubber and plastics, Plastics.

National Metrological Technical Specifications of the People's Republic of China, Automatic Calorimeter Calibration

JJF 1666-2017 Calibration Specification for Automatic Quantitative Analyzers of Microorganism
JJF 1098-2003 Calibration Specification for Auto-measuring System of Thermocouples and Resistance Thermometers
JJF 1874-2020 Calibration Specification for (Automatic) Nucleic Acid Extractors
JJF 1720-2018 Calibration Specification for Automatic Chemistry Analyzers
JJF 1823-2020 Calibration Specification for Automatic Urinary Sediment Analyzers
JJF 2045-2023 Calibration Specification for Calibrators of Motor Vehicle Engine Speed Measuring Instruments
JJF(机械) 1032-2019 Calibration specification for bearing runout measuring instrument
JJF(机械)1032-2019 Calibration specification for bearing runout measuring instrument
JJF 1375-2012 Calibration Specification for Motor Vehicle Engine Speed Measuring Instruments
JJF 1410-2013 Calibration Specification for Dynamical Screw Travel Testers
JJF(建材)155-2018 Calibration Specification for Automatic Testers of Marsh Time for Cement Paste
JJF(建材) 155-2018 Calibration specification for automatic tester of Martens flow time for cement slurry
JJF(建材) 160-2019 Calibration specification for photothermal mirror reflectance measuring instrument
JJF 1752-2019 Calibration Specification for Automatic Closed Luminescence Immunoassay Analyzers
JJF 1875-2020 Calibration Specification for On-line Automatic Monitors of Permanganate Index
JJF 1185-2007 Calibration Specification for Vibrometer (Velocity) of Rolling Bearings
JJF 1570-2016 Calibration specification for on-site dynamic balance measurement analyzer
JJF 1371-2012 Calibration Specification for Vibrometer(Acceleration)of Rolling Bearings
JJF 1089-2002 Calibration Specification for Instruments for Measuring Radial Clearance of Rolling Bearing
JJF(建材) 164-2020 Calibration specification for on-site photothermal parameter measuring instrument for architectural glass
JJF(机械) 066-2009 Calibration specification for YDY motor stall torque measuring instrument

Group Standards of the People's Republic of China, Automatic Calorimeter Calibration

T/CMA 032-2021 Calibration method for automatic benzene crystal point testers
T/QGCML 1651-2023 Automatic micro-sampling equipment pipette calibration device
T/SSM 5-2022 Calibration specifications for particle number concentration measuring instruments used in motor vehicle emissions

American Society for Testing and Materials (ASTM), Automatic Calorimeter Calibration

ASTM E968-02(2014) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
ASTM E898-20 Standard Practice for Calibration of Non-Automatic Weighing Instruments
ASTM E967-97 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E2040-99 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-03 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-08 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-08(2014) Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2603-15 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
ASTM E2069-06(2018) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2069-19 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2603-08 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
ASTM E2254-18 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2254-08 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2254-23 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E3301-22 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers Using Thermal Lag
ASTM E2041-03 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E2041-99 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E2041-01 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM D3795-00a Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM E2041-13e1 Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method

AGMA - American Gear Manufacturers Association, Automatic Calorimeter Calibration

2114-A98-1998 Measuring Instrument Calibration@ Gear Pitch and Runout Measurements

Professional Standard - Energy, Automatic Calorimeter Calibration

NB/T 11056-2023 Calibration specification for automatic detection device of relay protection tester

AENOR, Automatic Calorimeter Calibration

UNE 500530:2003 Automatic weather stations networks. Characterization of the instrumentation. Automatic weather stations maintenance criteria and sensor calibration.
UNE 32006:1995 SOLID MINERAL FUELS. DETERMINATION OF GROSS CALORIFIC VALUE BY AUTOMATIC CALORIMETER.
UNE-ISO 248-2:2013 Rubber, raw — Determination of volatilematter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
UNE 77229:2004 Stationary source emissions. Determination of carbon monoxide, carbon dioxide and oxygen. Performance characteristics and calibration of automated measuring systems.
UNE-EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Automatic Calorimeter Calibration

GB/T 27762-2011 Standard test method for mass scale calibration of thermogravimetric analyzers
GBJ 131-1990 Quality inspection and evaluation of automatic apparatus installation
GB/T 5275.7-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 7:Thermal mass-flow controllers

International Organization for Standardization (ISO), Automatic Calorimeter Calibration

ISO/TS 14934-4:2007 Fire tests - Calibration of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
ISO 14934-4:2014 Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
ISO 4402:1991 Hydraulic fluid power; calibration of automatic-count instruments for particles suspended in liquids; method using classified AC fine test dust contaminant
ISO/TS 14934-1:2002 Reaction-to-fire tests - Calibration and use of radiometers and heat flux meters - Part 1: General principles
ISO 4402:1977 Hydraulic fluid power; Calibration of liquid automatic particle-count instruments; Method using Air Cleaner Fine Test Dust contaminant
ISO 6145-7:2018 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 7: Thermal mass-flow controllers
ISO 6145-5:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
ISO/TS 20460:2015 Paper and board - Automated on-line testing - Metrological comparability between standardized measurements and output of on-line gauges
ISO 12039:2019 Stationary source emissions — Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas — Performance characteristics of automated measuring systems
ISO 12039:2001 Stationary source emissions - Determination of carbon monoxide, carbon dioxide and oxygen - Performance characteristics and calibration of automated measuring systems

Association Francaise de Normalisation, Automatic Calorimeter Calibration

FD X07-017-2:1997 Metrology. Calibration and verification procedure for non-automatic weighing instruments. Part 2 : calibration.
NF P94-105:2012 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie variable - Principe et méthode d'étalonnage du pénétromètre - Exploitation des résultats - Interprétation
NF X20-205-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7 : thermal mass-flow controllers.
NF P94-063:2011 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie constante - Principe et méthode d'étalonnage des pénétrodensitographes - Exploitation des résultats - Interprétation
NF EN 60444-5:2001 Mesure des paramètres des résonateurs à quartz - Partie 5 : méthodes pour la détermination des paramètres électriques équivalents utilisant des analyseurs automatiques de réseaux et correction des erreurs
NF EN ISO 6145-7:2018 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes dynamiques - Partie 7 : régulateurs thermiques de débit massique

British Standards Institution (BSI), Automatic Calorimeter Calibration

18/30373552 DC BS EN 63144. Industrial Process Control Devices. Thermographic Imagers. Metrological Characterization and Calibration of Thermographic Imagers
BS EN ISO 7278-2:1990 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Pipe provers
BS ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Thermal mass-flow controllers
BS EN ISO 6145-7:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Thermal mass-flow controllers
BS EN ISO 6145-7:2018 Tracked Changes. Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Thermal mass-flow controllers
BS EN 60444-5:1997 Measurement of quartz crystal unit parameters. Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction
PD ISO/TS 20460:2015 Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges
BS ISO 248-2:2012 Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit

RU-GOST R, Automatic Calorimeter Calibration

GOST R 56420.1-2015 Lifts, escalators and moving walks. Energy characteristics. Part 1. Measurement and verification
GOST R 8.874-2014 State system for ensuring the uniformity of measurements. Autocollimators. Verification procedure
GOST OIML R 76-1-2011 State system for ensuring the uniformity of measurements. Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests

German Institute for Standardization, Automatic Calorimeter Calibration

DIN EN 63144:2018 Industrial Process Control Devices - Thermographic Imagers - Metrological Characterization and Calibration of Thermographic Imagers (IEC 65B/1109/CD:2017); Text in German and English
DIN EN ISO 7278-2:1997 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers (ISO 7278-2:1988); German version EN ISO 7278-2:1995
DIN EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009); German version EN ISO 6145-7:2010
DIN 45669-3:2006 Measurement of vibration immission - Part 3: Test (calibration and assessment) of the vibration measuring instrumentation; Primary test, verification, intermediate test, functional check in situ
DIN EN ISO 6145-7:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
DIN CEN ISO/TS 21805:2019-07*DIN SPEC 14039:2019-07 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018); German version EN ISO 6145-7:2018
DIN EN ISO 6145-7:2019-07 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018); German version EN ISO 6145-7:2018

Standard Association of Australia （SAA）, Automatic Calorimeter Calibration

AS/NZS 1591.4:1995 Acoustics - Instrumentation for audiometry - A mechanical coupler for calibration of bone vibrators
AS 4250.2:1995 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Pipe provers
AS/NZS 3161:2005 Approval and test specification - Thermostats and energy regulators

DE-VDA, Automatic Calorimeter Calibration

VDA 280-5-1998 Colour measurement for motor vehicles - Calibration of colour measurement instruments that measure reflection

CEN - European Committee for Standardization, Automatic Calorimeter Calibration

EN ISO 6145-7:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers

Korean Agency for Technology and Standards (KATS), Automatic Calorimeter Calibration

KS I ISO 6145-7:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 7:Thermal mass-flow controllers
KS I ISO 6145-7:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 7：Thermal mass-flow controllers
KS M ISO 7278-2:2003 Liquid hydrocarbons－Dynamic measurement－Proving systems for volumetric meters－Part 2：Pipe provers
KS M ISO 248-2:2014 Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
KS C IEC 60444-5-2016(2021) Measurement of quartz crystal units parameters ― Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction
KS I ISO 12039:2006 Stationary source emissions－Determination of carbon monoxide, carbon dioxide and oxygen－Performance characteristics and calibration of automated measuring systems
KS I ISO 12039:2021 Stationary source emissions — Determination of carbon monoxide, carbon dioxide and oxygen — Performance characteristics and calibration of automated measuring systems
KS I ISO 12039-2006(2016) Stationary source emissions－Determination of carbon monoxide, carbon dioxide and oxygen－Performance characteristics and calibration of automated measuring systems

European Committee for Standardization (CEN), Automatic Calorimeter Calibration

EN ISO 6145-7:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)

Professional Standard - Nuclear Industry, Automatic Calorimeter Calibration

EJ 282-1986 Quality standard for inspection and maintenance of automatic instruments in uranium mining, metallurgy and chemical industry

Danish Standards Foundation, Automatic Calorimeter Calibration

DS/ISO 4402:1989 Hydraulic fluid power. Calibration of automatic-count instruments for particles suspended in liquids. Method using classified AC fine test dust contaminant
DS/EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
DS/EN 60444-5:1998 Measurement of quartz crystal unit parameters - Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction
DS/ISO 12039:2001 Stationary source emissions - Determination of carbon monoxide, carbon dioxide and oxygen - Performance characteristics and calibration of automated measuring systems

Japanese Industrial Standards Committee (JISC), Automatic Calorimeter Calibration

JIS Z 2502:2000 Metallic powders -- Determination of flowability by means of a calibrated funnel (Hall flowmeter)
JIS Z 2502:2012 Metallic powders -- Determination of flow rate by means of a calibrated funnel (Hall flowmeter)

API - American Petroleum Institute, Automatic Calorimeter Calibration

API MPMS 4.9.3-2010 Manual of Petroleum Measurement Standards Chapter 4—Proving Systems Section 9—Methods of Calibration for Displacement and Volumetric Tank Provers Part 3—Determination of the Volume of Displacement Provers by the Master Meter Method of Calibration Measurem

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Automatic Calorimeter Calibration

ASHRAE 4029-1997 Improving Thermal and Flow Properties of Chilled Water - Part 1: Material Selection and Instrument Calibration (RP-801)

European Association of Aerospace Industries, Automatic Calorimeter Calibration

AECMA PREN 4390-1997 Aerospace Series Nuts, Anchor, Self-Locking, Floating, Self-Aligning, Two Lug, in Heat Resisting Steel, Silver Plated, Classification : 900 MPa (at Ambient Temperature) / 425 Degrees Celsius Edition P 1
AECMA PREN 4591-2000 Aerospace Series Nuts, Barrel, Self-Locking, Floating, Self-Aligning, in Heat Resisting Nickel Base Alloy, MoS2 Lubricated Classification: 1 550 MPa (at Ambient Temperature)/315 Degrees C Edition P 1

Association of German Mechanical Engineers, Automatic Calorimeter Calibration

VDI 3490 Blatt 17-1998 Measurement of gases - Calibration gas mixtures - Dynamic preparation with thermal mass flow controllers

American National Standards Institute （ANSI), Automatic Calorimeter Calibration

ANSI/IEEE 515.1:2005 Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Commercial Applications

Professional Standard - Petroleum, Automatic Calorimeter Calibration

SY/T 4031-1993(条文说明) Standard for Inspection and Evaluation Quality of Petroleum Construction Engineering.Automatic Instrument Installation Engineering
SY/T 4031-1993 Standard for quality inspection and evaluation of petroleum construction engineering Automatic instrument installation engineering

中国石油天然气总公司, Automatic Calorimeter Calibration

SY 4031-1993 Petroleum construction project quality inspection and assessment standard automated instrument installation project

ES-UNE, Automatic Calorimeter Calibration

UNE-EN ISO 6145-7:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
UNE-EN 60444-5:1997 MEASUREMENT QUARTZ CRYSTAL UNIT PARAMETERS. PART 5: METHODS FOR THE DETERMINATION OF EQUIVALENT ELECTRICAL PARAMETERS USING AUTOMATIC NETWORK ANALYZER TECHNIQUES AND ERROR CORRECTION (Endorsed by AENOR in October of 1997.)

Institute of Electrical and Electronics Engineers (IEEE), Automatic Calorimeter Calibration

ANSI/IEEE Std 583-1982 IEEE Standard Modular Instrumentation and Digital Interface System (CAMAC) (Computer Automated Measurement and Control)

SE-SIS, Automatic Calorimeter Calibration

SIS SS 02 84 25-1991 Air quality — Stationary source emissions — Determination of the mass concentration of nitrogen oxides — Performance characteristics and calibration of automated measuring systems

未注明发布机构, Automatic Calorimeter Calibration

BS 5540-6:1990(2011) Evaluating particulate contamination of hydraulic fluids — Part 6 : Method of calibrating liquid automatic particle - count instruments (using mono - sized latex spheres)

IX-EU/EC, Automatic Calorimeter Calibration

M 276-1998 STANDARDISATION MANDATE TO CEN FOR MANUAL REFERENCE METHODS FOR THE CALIBRATION OF AUTOMATED MEASUREMENT SYSTEMS FOR CARBON MONOXIDE (CO) EMISSIONS IN STACK
M 278-1998 STANDARDISATION MANDATE TO CEN FOR MANUAL REFERENCE METHODS FOR THE CALIBRATION OF AUTOMATED MEASUREMENT SYSTEMS FOR SULPHUR DIOXIDE (SO2) AND NITROGEN OXIDES (NOX) EMISSIONS IN STACK

KR-KS, Automatic Calorimeter Calibration

KS I ISO 12039-2021 Stationary source emissions — Determination of carbon monoxide, carbon dioxide and oxygen — Performance characteristics and calibration of automated measuring systems

Lithuanian Standards Office , Automatic Calorimeter Calibration

LST EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)