ZH
RU
ES

Preparation method of contact plate

Preparation method of contact plate, Total:439 items.

In the international standard classification, Preparation method of contact plate involves: Reinforced plastics, Plastics, Materials and articles in contact with foodstuffs, Ceramics, Refractories, Kitchen equipment, Electromechanical components for electronic and telecommunications equipment, Applications of information technology, Switchgear and controlgear, Surface treatment and coating, Safety of machinery, Ergonomics, Road engineering, Electrical accessories, Glass, Tobacco, tobacco products and related equipment, Welding, brazing and soldering, Microbiology, Medical equipment, Sterilization and disinfection, Air quality, Linear and angular measurements, Chipless working equipment, Graphic technology, Protection against fire, Electrical and electronic testing, Printed circuits and boards, Paints and varnishes, Sensory analysis, FOOD TECHNOLOGY, Construction materials, Aerospace electric equipment and systems, Telecommunication systems, Electromagnetic compatibility (EMC), Water quality, Electronic components in general, Metalliferous minerals, Lighting, Road vehicle systems, Structure and structure elements, Birth control. Mechanical contraceptives, Semiconductor devices, Protective equipment, Environmental protection, Products of the chemical industry, Dentistry, Radiocommunications, Rectifiers. Convertors. Stabilized power supply, Protection against dangerous goods.

British Standards Institution (BSI), Preparation method of contact plate

BS ISO 1268-2:2001 Fibre-reinforced plastics - Methods of producing test plates - Contact and spray-up moulding
BS ISO/IEC 18745-2:2021 Tracked Changes. Test methods for machine readable travel documents (MRTD) and associated devices. Test methods for the contactless interface
BS ISO/IEC 10373-6:2020+A1:2021 Cards and security devices for personal identification. Test methods - Contactless proximity objects
BS IEC 62899-301-2:2017 Printed electronics - Equipment. Contact printing. Rigid master. Measurement method of plate master pattern dimension
BS ISO/IEC 18745-2:2016 Information technology. Test methods for machine readable travel documents (MRTD) and associated devices. Test methods for the contactless interface
BS IEC 62899-301-1:2017 Printed electronics - Equipment. Contact printing. Rigid master. Measurement method of plate master external dimension
BS EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
BS EN ISO 4531:2022 Vitreous and porcelain enamels. Release from enamelled articles in contact with food. Methods of test and limits
BS EN ISO 4531:2018 Vitreous and porcelain enamels. Release from enamelled articles in contact with food. Methods of test and limits
BS ISO/IEC 10373-7:2019 Cards and security devices for personal identification. Test methods - Contactless vicinity objects
BS EN 1186-13:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration at high temperatures
20/30405762 DC BS ISO/IEC 18745-2. Cards and security devices for personal identification. Test methods for machine readable travel documents (MRTD) and associated devices. Part 2. Test methods for the contactless interface
BS EN 60947-5-4:2003+A1:2019 Low-voltage switchgear and controlgear - Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests
BS EN 13880-6:2019 Tracked Changes. Hot applied joint sealants. Method for the preparation of samples for testing
BS 476-12:1991 Fire tests on building materials and structures - Method of test for ignitability of products by direct flame impingement
BS EN 60947-5-4:2003 Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests
21/30421424 DC BS EN ISO 4531. Vitreous and porcelain enamels. Release from enamelled articles in contact with food. Methods of test and limits
19/30388568 DC BS ISO/IEC 10373-6 AMD2. Cards and security devices for personal identification. Test methods. Part 6. Contactless proximity objects
BS EN 1186-8:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into olive oil by article filling
BS EN 60512-1-4:1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. General. Test 1d. Contact protection effectiveness (scoop-proof)
BS EN ISO 15792-2:2008 Welding consumables - Test methods - Preparation of single-run and two-run technique test specimens in steel
BS EN 1597-1:1997 Welding consumables - Test methods - Test piece for all-weld metal test specimens in steel, nickel and nickel alloys
BS EN 1597-2:1997 Welding consumables - Test methods - Preparation of test piece for single-run and two-run technique test specimens in steel
BS EN 60512-15-8:1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Mechanical tests on contacts and terminations. Test 15h. Contact retention system resistance to tool application
21/30432862 DC BS EN 16105. Paints and varnishes. Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water
BS EN ISO 15792-2:2020 Welding consumables. Test methods - Preparation of single-run and two-run technique test pieces and specimens in steel
BS 6920-2.2.3:2000+A2:2014 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water.Methods of test.Odour and flavour of water.Method of testing tastes imparted to water by hoses for convey
BS EN 1186-9:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into aqueous food simulants by article filling
BS EN IEC 63203-406-1:2022 Wearable electronic devices and technologies - Test method for measuring surface temperature of wrist-worn wearable electronic devices while in contact with human skin (IEC 63203-406-1:2021)
19/30400561 DC BS EN IEC 63203-406-1. Wearable electronic devices and technologies. Part 406-1. Test methods of on-body wearable electronic devices for measuring skin contact temperature
BS 6920-2.2.3:2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - Odour and flavour of water - Method of testing tastes imparted to water by hoses for
BS EN 16105:2023 Tracked Changes. Paints and varnishes. Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water
19/30379185 DC BS EN 63203-406-1. Wearable electronic devices and technologies. Part 406-1. Test methods of wrist worn wearable electronic devices for measuring skin contact temperature
BS EN 60512-16-20:1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Mechanical tests on contacts and terminations. Test 16t. Mechanical strength (wired termination of solderless connections)
BS EN ISO 15792-1:2020 Welding consumables. Test methods - Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys
20/30414127 DC BS EN IEC 63203-406-1. Wearable electronic devices and technologies. Part 406-1. Test method for measuring contact surface temperature of wrist worn wearable electronic devices
20/30401233 DC BS IEC 62899-301-3. Printed Electronics - Part 301-3. Equipment. Contact printing. Rigid master. Measurement method of printing plate roller shape errors
23/30474619 DC BS IEC 62899-301-3. Printed Electronics - Part 301-3. Equipment. Contact printing. Rigid master. Method to measure the shape errors of printing plate rollers
BS EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface prof
BS ISO/IEC TR 15294:2000 Information technology - Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
BS 9521:1983 Specification for removable contacts of assessed quality for electrical connectors as defined by BS 9520: generic data, methods of test and rules for the preparation of detail specifications
BS EN 1186-15:2002 Materials and articles in contact with foodstuffs - Plastics - Alternative test methods to migration into fatty food simulants by rapid extraction into iso-octane and/or 95 % ethanol
19/30401572 DC BS EN ISO 15792-2. Welding consumables. Test methods. Part 2. Preparation of single-run and two-run technique test specimens in steel
BS PD CEN/TR 16663:2014 Durability of wood and wood-based products. Determination of emissions from preservative treated wood to the environment. Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground). Semi-field method
BS PD CEN/TS 16663:2016 Durability of wood and wood-based products. Determination of emissions from preservative treated wood to the environment. Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground). Semi-field method
DD IEC/PAS 62437:2005 Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices. Limits and methods of measurement. Specifications for active antennas

Lithuanian Standards Office , Preparation method of contact plate

LST EN 14481-2004 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
LST EN 1217-2000 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles
LST EN 1184-2000 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles
LST EN 13258-2004 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles
LST EN 1183-2000 Materials and articles in contact with foodstuffs - Test methods for thermal shock and thermal shock endurance
LST EN 60947-5-4-2004 Low-voltage switchgear and controlgear. Part 5-4: Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests (IEC 60947-5-4:2002)
LST EN 12980-2000 Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance
LST EN 1186-12-2002 Materials and articles in contact with foodstuffs - Plastics - Part 12: Test methods for overall migration at low temperatures
LST EN 1186-13-2002 Materials and articles in contact with foodstuffs - Plastics - Part 13: Test methods for overall migration at high temperatures
LST EN 13880-6-2004 Hot applied joint sealants - Part 6: Method for the preperation of samples for testing
LST EN 1186-8-2002 Materials and articles in contact with foodstuffs - Plastics - Part 8: Test methods for overall migration into olive oil by article filling
LST ISO 5497:1998 Sensory analysis. Methodology. Guidelines for the preparation of samples for which direct sensory analysis is not fesible
LST EN 1186-1-2002 Materials and articles in contact with foodstuffs - Plastics - Part 1: Guide to the selection of conditions and test methods for overall migration
LST EN 15284-2007 Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastics cookware
LST EN 1186-9-2002 Materials and articles in contact with foodstuffs - Plastics - Part 9: Test methods for overall migration into aqueous food simulants by article filling
LST EN 1186-14-2002 Materials and articles in contact with foodstuffs - Plastics - Part 14: Test methods for 'substitute tests' for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95 % ethanol
LST EN 1186-4-2002 Materials and articles in contact with foodstuffs - Plastics - Part 4: Test methods for overall migration into olive oil by cell
LST EN 1186-6-2002 Materials and articles in contact with foodstuffs - Plastics - Part 6: Test methods for overall migration into olive oil using a pouch
LST EN 1186-2-2002 Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration into olive oil by total immersion
LST EN 1186-10-2002 Materials and articles in contact with foodstuffs - Plastics - Part 10: Test methods for overall migration into olive oil (modified method for use in cases where incomplete extraction of olive oil occurs)
LST ISO 5497:2004 Sensory analysis. Methododology. Guidelines for the preparation of samples for which direct sensory analysis is not feasible (idt ISO 5497:1982)
LST EN 1186-11-2002 Materials and articles in contact with foodstuffs - Plastics - Part 11: Test methods for overall migration into mixtures of C-labelled synthetic triglycerides
LST EN 1186-5-2002 Materials and articles in contact with foodstuffs - Plastics - Part 5: Test methods for overall migration into aqueous food simulants by cell
LST EN 1186-7-2002 Materials and articles in contact with foodstuffs - Plastics - Part 7: Test methods for overall migration into aqueous food simulants using a pouch
LST EN 1186-3-2002 Materials and articles in contact with foodstuffs - Plastics - Part 3: Test methods for overall migration into aqueous food simulants by total immersion
LST EN ISO 15792-2:2008 Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test specimens in steel (ISO 15792-2:2000)
LST EN ISO 15792-1:2020 Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020)
LST EN 60512-16-20-2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 16: Mechanical tests on contacts and terminations. Section 20: Test 16t: Mechanical strength (wired termination of solderless connections) (IEC 605
LST EN 13130-1-2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastic
LST L ENV 13130-1-2000 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 1: Guide to the test methods for the specific migration of substances from plastics into foods and food simulants and the determination of substances in p
LST EN ISO 15792-2:2020 Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020)
LST EN 60512-1-4-2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 1: General. Section 4: Test 1d: Contact protection effectiveness (scoop-proof) (IEC 60512-1-4:1997)
LST EN 1186-15-2002 Materials and articles in contact with foodstuffs - Plastics - Part 15: Alternative test methods to migration into fatty food simulants by rapid extraction into iso-octane and/or 95 % ethanol

AENOR, Preparation method of contact plate

UNE-EN 14481:2004 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
UNE 126301:2003 Glassware in contact with food. Release of lead and cadmium. Test method and permissible limits.
UNE-EN 60512-2-2:2004 Connectors for electronic equipment - Tests and measurements -- Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method
UNE-EN 13880-6:2006 Hot applied joint sealants - Part 6: Method for the preperation of samples for testing
UNE 87015:1986 SENSORY ANALYSIS. METHODOLOGY. GUIDELINES FOR THE PREPARATION OF SAMPLES FOR WHICH DIRECT SENSORY ANALYSIS IS NOT FEASIBLE
UNE 20606-8/2C:1983 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. CONNECTOR TEST (MECHANICAL) AND MECHANICAL TEST ON CONTACTS AND TERMINATIONS
UNE 20606-8:1981 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. CONNECTOR TESTS (MECHANICAL) AND MECHANICAL TESTS ON CONTACTS AND TERMINATIONS
UNE 20606-8/1C:1982 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. CONNECTOR (MECHANICAL) TESTS AND MECHANICAL TESTS ON CONTACTS AND TERMINATIONS
UNE-EN 60947-5-4:2005 Low-voltage switchgear and controlgear -- Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests
UNE-EN 60512-15-8:1997 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 15: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS. SECTION 8: TEST 15H. CONTACT RETENTION SYSTEM RESISTANCE TO TOOL APPLICATION.
UNE-EN 60512-16-20:1999 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 16: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS. SECTION 20: TEST 16T: MECHANICAL STRENGHT (WIRED TERMINATION OF SOLDERLESS CONNECTIONS).
UNE-CEN/TS 14577:2005 EX Materials and articles in contact with foodstuffs - Plastics - Polymeric additives - Test method for the determination of the mass fraction of a polymeric additive that lies below 1 000 Daltons
UNE-EN ISO 15792-2:2009 Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test specimens in steel (ISO 15792-2:2000)
UNE-EN 60512-1-4:2003 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 1: General -- Section 4: Test 1d: Contact protection effectiveness (scoop-proof).
UNE-EN 13130-1:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastic

Danish Standards Foundation, Preparation method of contact plate

DS/EN 14481:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
DS/EN 1217:1998 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles
DS/EN 1184:1998 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles
DS/EN 13258:2003 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles
DS/ISO/IEC 18745-2:2021 Test methods for machine readable travel documents (MRTD) and associated devices – Part 2: Test methods for the contactless interface
DS/EN 1183:1998 Materials and articles in contact with foodstuffs - Test methods for thermal shock and thermal shock endurance
DS/EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method
DS/ISO 2971:2013 Cigarettes and filter rods - Determination of nominal diameter - Method using a non-contact optical measuring apparatus
DS/ISO/IEC 10373-3:2011 Identification cards - Test methods - Part 3: Integrated circuit cards with contacts and related interface devices
DS/ISO/IEC 10373-3/Cor 1:2013 Identification cards - Test methods - Part 3: Integrated circuit cards with contacts and related interface devices
DS/EN 12980:2000 Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance
DS/EN 1186-12:2002 Materials and articles in contact with foodstuffs - Plastics - Part 12: Test methods for overall migration at low temperatures
DS/EN 1186-13:2002 Materials and articles in contact with foodstuffs - Plastics - Part 13: Test methods for overall migration at high temperatures
DS/EN 13880-6:2004 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing
DS/EN 1186-8:2002 Materials and articles in contact with foodstuffs - Plastics - Part 8: Test methods for overall migration into olive oil by article filling
DS/EN 60947-5-4:2004 Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests
DS/IEC 512-8:1986 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations with Amendment No.1(1985)
DS/ISO/IEC 10373-6:2020 Cards and security devices for personal identification – Test methods – Part 6: Contactless proximity objects – AMENDMENT 2: Enhancements for harmonization
DS/EN 1186-1:2002 Materials and articles in contact with foodstuffs - Plastics - Part 1: Guide to the selection of conditions and test methods for overall migration
DS/EN 15284:2007 Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastics cookware
DS/EN 1186-9:2002 Materials and articles in contact with foodstuffs - Plastics - Part 9: Test methods for overall migration into aqueous food simulants by article filling
DS/EN 1186-14:2002 Materials and articles in contact with foodstuffs - Plastics - Part 14: Test methods for 'substitute tests' for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95% ethanol
DS/EN 1186-4:2002 Materials and articles in contact with foodstuffs - Plastics - Part 4: Test methods for overall migration into olive oil by cell
DS/IEC 512-8:1995 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
DS/EN 1186-10:2002 Materials and articles in contact with foodstuffs - Plastics - Part 10: Test methods for overall migration into olive oil (modified method for use in case where incomplete extraction of olive oil occurs)
DS/EN 1186-6:2002 Materials and articles in contact with foodstuffs - Plastics - Part 6: Test methods for overall migration into olive oil using a pouch
DS/CEN/TS 14234:2003 Materials and articles in contact with foodstuffs - Polymeric coatings on paper and board - Guide to the selection of conditions and test methods for overall migration
DS/CEN/TS 14235:2003 Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration
DS/EN 1186-2:2002 Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration into olive oil by total immersion
DS/EN ISO 15792-2:2008 Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test specimens in steel
DS/CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1: General considerations
DS/EN 60512-16-20:1997 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20, Test 16t: Mechanical strength (wired termination of solderless connections)
DS/EN 1186-11:2002 Materials and articles in contact with foodstuffs - Plastics - Part 11: Test methods for overall migration into mixtures of C-labelled synthetic triglycerides
DS/EN 50010:1994 Low voltage switchgear and controlgear for industrial use - Inductive proximity switches - Methods for measuring the operating distance and operating frequency
DS/EN 1186-3:2002 Materials and articles in contact with foodstuffs - Plastics - Part 3: Test methods for overall migration into aqueous simulants by total immersion
DS/EN 1186-5:2002 Materials and articles in contact with foodstuffs - Plastics - Part 5: Test methods for overall migration into aqueous food simulant by cell
DS/EN 1186-7:2002 Materials and articles in contact with foodstuffs - Plastics - Part 7: Test methods for overall migration into aqueous food simulants using a pouch
DS/CEN/TS 14577:2004 Materials and articles in contact with foodstuffs - Plastics - Polymeric additives - Test method for the determination of the mass fraction of a polymeric additive that lies below 1000 Daltons
DS/EN 60512-1-4/Corr.:2001 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)
DS/EN 60512-1-4:1998 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)
DS/EN 13130-1:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastic
DS/CEN/TS 15119-2:2013 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 2: Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method
DS/EN 1186-15:2002 Materials and articles in contact with foodstuffs - Plastics - Part 15: Alternative test methods to migration into fatty food simulants by rapid extraction into iso-octane and/or 95 % ethanol

German Institute for Standardization, Preparation method of contact plate

DIN EN 14481:2003-09 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact; German version EN 14481:2003
DIN EN 1217:1998-01 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles; German version EN 1217:1998
DIN EN 1183:1997-08 Materials and articles in contact with foodstuffs - Test methods for thermal shock endurance; German version EN 1183:1997
DIN EN 13258:2003-07 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles; German version EN 13258:2003
DIN EN 1184:1997-08 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles; German version EN 1184:1997
DIN EN 1217:1998 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles; German version EN 1217:1998
DIN EN 13258:2003 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles; German version EN 13258:2003
DIN EN ISO 4531:2022-08 Vitreous and porcelain enamels - Release from enamelled articles in contact with food - Methods of test and limits (ISO 4531:2022); German version EN ISO 4531:2022
DIN EN ISO 4531:2018 Vitreous and porcelain enamels - Release from enamelled articles in contact with food - Methods of test and limits (ISO 4531:2018)
DIN EN 60512-2-2:2004-01 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method (IEC 60512-2-2:2003); German version EN 60512-2-2:2003 / Note: DIN...
DIN ISO 2971:2015-12 Cigarettes and filter rods - Determination of nominal diameter - Method using a non-contact optical measuring apparatus (ISO 2971:2013)
DIN EN ISO 4531:2021 Vitreous and porcelain enamels - Release from enamelled articles in contact with food - Methods of test and limits (ISO/DIS 4531:2021); German and English version prEN ISO 4531:2021
DIN EN 12980:2015-02 Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance; German version EN 12980:2000
DIN EN 1186-2:2020 Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration in vegetable oils; German and English version prEN 1186-2:2020
DIN EN 1186-13:2002-12 Materials and articles in contact with foodstuffs - Plastics - Part 13: Test methods for overall migration at high temperatures; German version EN 1186-13:2002 / Note: To be replaced by DIN EN 1186-13 (2006-11).
DIN EN 60512-15-8:1996 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations; section 8: Test 15h: Contact retention system resistance to tool application (IEC 60512-15-8:1
DIN EN 13880-6:2019 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing
DIN EN 1186-2:2022 Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration in vegetable oils
DIN EN 1186-2:2022-10 Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration in vegetable oils; German version EN 1186-2:2022
DIN EN 13880-6:2019-06 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing; German version EN 13880-6:2019
DIN EN 1186-3:2020 Materials and articles in contact with foodstuffs - Plastics - Part 3: Test methods for overall migration in evaporable simulants; German and English version prEN 1186-3:2020
DIN EN 1186-3:2022 Materials and articles in contact with foodstuffs - Plastics - Part 3: Test methods for overall migration in evaporable simulants
DIN EN 1186-14:2002 Materials and articles in contact with foodstuffs - Plastics - Part 14: Test methods for 'substitute tests' for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95 % ethanol; German versio
DIN EN 60947-5-4:2005 Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests (IEC 60947-5-4:2002); German version EN 60947-5-4:2003
DIN EN 1186-6:2002 Materials and articles in contact with foodstuffs - Plastics - Part 6: Test methods for overall migration into olive oil using a pouch; German version EN 1186-6:2002
DIN EN ISO 15792-2:2008 Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test specimens in steel (ISO 15792-2:2000); German version EN ISO 15792-2:2008
DIN CEN/TS 14234:2003 Materials and articles in contact with foodstuffs - Polymeric coatings on paper and board - Guide to the selection of conditions and test methods for overall migration; German version CEN/TS 14234:2002
DIN EN 16105:2023-04 Paints and varnishes - Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water; German version EN 16105:2023
DIN EN 1186-3:2022-10 Materials and articles in contact with foodstuffs - Plastics - Part 3: Test methods for overall migration in evaporable simulants; German version EN 1186-3:2022
DIN EN 1186-1:2002-07 Materials and articles in contact with foodstuffs - Plastics - Part 1: Guide to the selection of conditions and test methods for overall migration; German version EN 1186-1:2002
DIN EN 15284:2007-07 Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastic cookware; German version EN 15284:2007
DIN EN 1186-9:2002 Materials and articles in contact with foodstuffs - Plastics - Part 9: Test methods for overall migration into aqueous simulants by article filling; German version EN 1186-9:2002
DIN EN 1186-2:2002 Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration into olive oil by total immersion; German version EN 1186-2:2002
DIN EN 1186-4:2002 Materials and articles in contact with foodstuffs - Plastics - Part 4: Test methods for overall migration into olive oil by cell; German version EN 1186-4:2002
DIN EN 1186-7:2002 Materials and articles in contact with foodstuffs - Plastics - Part 7: Test methods for overall migration into aqueous simulants using a pouch; German version EN 1186-7:2002
DIN EN 1186-8:2002 Materials and articles in contact with foodstuffs - Plastics - Part 8: Test methods for overall migration into olive oil by article filling; German version EN 1186-8:2002
DIN EN 12571:1999 Materials and articles in contact with foodstuffs - Transport units for catering containers containing prepared foodstuffs - Thermal and hygienic requirements and testing; German version EN 12571:1998
DIN EN 1186-3:2002 Materials and articles in contact with foodstuffs - Plastics - Part 3: Test methods for overall migration into aqueous simulants by total immersion; German version EN 1186-3:2002
DIN EN 15284:2007 Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastic cookware; Germang version EN 15284:2007
DIN EN 1186-1:2002 Materials and articles in contact with foodstuffs - Plastics - Part 1: Guide to the selection of conditions and test methods for overall migration; German version EN 1186-1:2002
DIN CEN/TS 14235:2003-01 Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration; German version CEN/TS 14235:2002
DIN CEN/TS 14234:2003-01 Materials and articles in contact with foodstuffs - Polymeric coatings on paper and board - Guide to the selection of conditions and test methods for overall migration; German version CEN/TS 14234:2002
DIN 74281-1:2000 Air braking systems - Pressure vessels - Part 1: Measures of welded steel and aluminium single chamber pressure vessels
DIN EN 1186-11:2002 Materials and articles in contact with foodstuffs - Plastics - Part 11: Test methods for overall migration into mixtures of <(hoch)14>C-labelled synthetic triglycerides; German version EN 1186-11:2002
DIN EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
DIN EN 60512-16-20:1997 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations; section 20: Test 16t: Mechanical strength (wired termination of solderless connections) (IEC 6
DIN CEN/TS 14235:2003 Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration; German version CEN/TS 14235:2002
DIN EN 1186-11:2002-12 Materials and articles in contact with foodstuffs - Plastics - Part 11: Test methods for overall migration into mixtures of <(hoch)14>C-labelled synthetic triglycerides; German version EN 1186-11:2002
DIN CEN/TS 14577:2004-03 Materials and articles in contact with foodstuffs - Plastics - Polymeric additives - Test method for the determination of the mass fraction of a polymeric additive that lies below 1000 Daltons; German version CEN/TS 14577:2003
DIN EN 1186-10:2002 Materials and articles in contact with foodstuffs - Plastics - Part 10: Test methods for overall migration into olive oil (modified method for use in case where incomplete extraction of olive oil occurs); German version EN 1186-10:2002
DIN EN ISO 15792-2:2020-12 Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020); German version EN ISO 15792-2:2020
DIN EN ISO 15883-2:2009 Washer-disinfectors - Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. (ISO 15883-2:2006); English version of DIN EN
DIN EN ISO 13732-3:2006 Ergonomic of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005); German version EN ISO 13732-3:2005
DIN EN ISO 15792-1:2020-12 Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020); German version EN ISO 15792-1:2020
DIN EN 60512-16-20:1997-03 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations; section 20: Test 16t: Mechanical strength (wired termination of solderless connections) (IE...
DIN EN 1186-15:2002 Materials and articles in contact with foodstuffs - Plastics - Part 15: Alternative test methods to migration into fatty food simulants by rapid extraction into iso-octane and/or 95 % ethanol; German version EN 1186-15:2002
DIN EN 1186-5:2002 Materials and articles in contact with foodstuffs - Plastics - Part 5: Test methods for overall migration into aqueous food simulants by cell; German version EN 1186-5:2002
DIN EN 13130-1:2004-08 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plas...
DIN EN ISO 15792-2:2020 Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020); German version EN ISO 15792-2:2020
DIN EN ISO 15792-1:2020 Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020); German version EN ISO 15792-1:2020

Association Francaise de Normalisation, Preparation method of contact plate

NF EN 14481:2003 Matériaux et articles en contact avec les denrées alimentaires - Plastiques - Méthodes d'essai pour la détermination d'un contact gras
NF EN 1217:1998 Matériaux et objets en contact avec les denrées alimentaires - Méthodes d'essai pour l'absorption d'eau par les objets en céramique
NF EN 13258:2003 Matériaux et articles en contact avec les denrées alimentaires - Méthodes d'essai de la résistance au tressaillage des articles en céramique
NF EN 1184:1997 Matériaux et objets en contact avec les denrées alimentaires - Méthodes d'essai visant à déterminer la translucidité des objets en céramique
NF A91-318*NF EN ISO 4531:2018 Vitreous and porcelain enamels - Release from enamelled articles in contact with food - Methods of test and limits
NF EN 1183:1997 Matériaux et objets en contact avec les denrées alimentaires - Méthodes d'essai pour le choc thermique et la résistance au choc thermique
NF T57-153-2*NF ISO 1268-2:2002 Fibre-reinforced plastics - Methods of producing test plates - Part 2 : contact and spray-up moulding
NF EN ISO 4531:2022 Emaux vitrifiés - Libération depuis les articles émaillés en contact avec les aliments - Méthode d'essai et limites
NF ISO 1268-2:2002 Plastiques renforcés de fibres - Méthodes de fabrication de plaques d'essai - Partie 2 : moulage au contact et par projection
NF EN 60512-2-2:2003 Connecteurs pour équipements électroniques - Essais et mesures - Partie 2-2 : essais de continuité électrique et de résistance de contact Essai 2b : résistance de contact - Méthode du courant d'essai spécifié
NF EN 14649:2005 Produits préfabriqués en béton - Méthode d'essai de la conservation de la résistance des fibres de verre en contact avec le ciment et le béton (SIC-TEST)
NF EN 13726-6:2003 Dispositifs médicaux non-actifs - Méthodes d'essai pour les pansements primaires en contact avec la plaie - Partie 6 : contrôle de l'odeur
NF P98-880-6*NF EN 13880-6:2019 Hot applied joint sealants - Part 6 : method for the preparation of samples for testing
NF X35-112-1:2006 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1 : hot surfaces.
NF X35-112-1*NF EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1 : hot surfaces.
NF V09-005:2013 Analyse sensorielle - Méthodologie - Directives pour la préparation d'échantillons pour lesquels l'analyse sensorielle directe n'est pas possible
NF C63-154*NF EN 60947-5-4:2004 Low-voltage switchgear and controlgear - Part 5-4 : control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests.
NF EN 60947-5-4/A1:2019 Appareillage à basse tension - Partie 5-4 : appareils et éléments de commutation pour circuits de commande - Méthode d'évaluation des performances des contacts à basse énergie - Essais spéciaux
NF EN 60947-5-4:2004 Appareillage à basse tension - Partie 5-4 : appareils et éléments de commutation pour circuits de commande - Méthode d'évaluation des performances des contacts à basse énergie - Essais spéciaux
NF EN 13880-6:2019 Produits de scellement de joints appliqués à chaud - Partie 6 : méthode d'essai pour la préparation des échantillons destinés à l'essai
NF L52-250-513:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513 : deformation resistance (Installation with plastic cable ties).
NF EN 16105:2023 Peintures et vernis - Méthode de laboratoire pour la détermination de la libération de substances dangereuses réglementées provenant de revêtements en contact avec l'eau par intermittence
NF V09-005:1982 Sensory analysis. Methodology. Guidelines for the preparation of samples for which direct sensory analysis is not feasible .
NF EN 15284:2007 Matériaux et articles en contact avec les denrées alimentaires - Méthode d'essai de la résistance des articles culinaires en céramique, verre, vitrocéramique ou plastique au chauffage par micro-ondes
NF EN 12571:1999 Matériaux et articles en contact avec les denrées alimentaires - Conteneurs pour le transport de bacs contenant des denrées alimentaires préparées - Prescriptions thermiques et d'hygiène et méthodes d'essai.
NF EN 1186-3:2022 Matériaux et objets en contact avec les denrées alimentaires - Matière plastique - Partie 3 : méthodes d'essai pour la migration globale dans les simulants évaporables
NF EN 1186-1:2003 Matériaux et objets en contact avec les denrées alimentaires - Matière plastique - Partie 1 : guide pour le choix des conditions et des méthodes d'essai en matière de migration globale
NF A81-054-2:2008 Welding consumables - Test methods - Part 2 : preparation of single-run and two-run technique test specimens in steel.
NF C90-901-406-1*NF EN IEC 63203-406-1:2022 Wearable electronic devices and technologies - Part 406-1 : test method for measuring surface temperature of wrist-worn wearable electronic devices while in contact with human skin
XP D25-302*XP CEN/TS 14234:2003 Materials and articles in contact with foodstuffs - Polymeric coatings on paper and board - Guide to the selection of conditions and test methods for overall migration
XP D25-301*XP CEN/TS 14235:2003 Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration
XP CEN/TS 14235:2003 Matériaux et objets en contact avec les denrées alimentaires - Revêtements polymères sur supports métalliques - Guide pour le choix des conditions et des méthodes d'essai en matière de migration globale
FD D25-116-1*FD CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1 : general considerations
NF EN IEC 63203-406-1:2022 Technologies et dispositifs électroniques prêts-à-porter - Partie 406-1 : méthode d'essai pour le mesurage de la température de surface des dispositifs électroniques prêts-à-porter placés au poignet au contact de la peau humaine
NF EN 60512-15-8:1997 Composants électromécaniques pour équipements électroniques - Procédures d'essai de base et méthodes de mesure - Partie 15 : essais mécaniques des contacts et des sorties. Section 8 : essai 15h : résistance du système de rétention des contac...
NF EN 1186-11:2003 Matériaux et objets en contact avec les denrées alimentaires - Matière plastique - Partie 11 : méthodes d'essai pour la migration globale dans des mélanges de triglycérides synthétiques marqués au 14C
NF EN 12980:2000 Matériaux et articles en contact avec les denrées alimentaires - Objets non métalliques à usage industriel pour la cuisine et le transport de nourriture - Méthode d'essai permettant de déterminer la résistance au choc
NF EN ISO 15792-2:2020 Produits consommables pour le soudage - Méthodes d'essai - Partie 2 : préparation de pièces d'essai et d'éprouvettes en une ou deux passes en acier
NF C93-470-8:1997 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 15 : MECHANICAL TESTS ON CONTACTS AND TERMINATIONS. SECTION 8 : TEST 15H : CONTACT RETENTION SYSTEM RESISTANCE TO TOOL APPLICATION. (EUROPEAN STAND
XP D25-115*XP CEN/TS 14577:2004 Materials and articles in contact with foodstuffs - Plastics - Polymeric additives - Test method for the determination of the mass fraction of a polymeric additive that lies below 1000 Daltons
NF S97-034:1998 Additional lubricants and medicinal or non-medicinal preparations intended or likely to be placed in contact with male condoms. Compatibility. Specifications and test methods.
NF EN ISO 15792-1:2020 Produits consommables pour le soudage - Méthodes d'essai - Partie 1 : préparation des pièces d'essai et des éprouvettes de métal fondu hors dilution pour le soudage de l'acier, du nickel et des alliages de nickel
XP CEN/TS 14577:2004 Matériaux et objets en contact avec les denrées alimentaires - Matières plastiques - Additifs polymériques - Méthode d'essai pour la détermination de la fraction massique d'un additif polymérique de masse moléculaire inférieure à 1000 daltons
NF EN 60512-1-4:1998 Composants électromécaniques pour équipements électroniques - Procédures d'essai de base et méthodes de mesure - Partie 1 : généralités. Section 4 : essai 1d : efficacité de la protection des contacts (scoop-proof)
NF EN ISO 8503-3:2012 Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Caractéristiques de rugosité des subjectiles d'acier décapés - Partie 3 : méthode d'étalonnage des comparateurs viso-tactiles ISO et de classificat...
NF T35-503-4*NF EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4 : method for the calibration of ISO surface profile comparators and for the determination of s
NF T35-503-4:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 4 : method for the calibration of ISO surface profile comparators and for the determination of sur
NF S97-034:2007 Additional lubricants and other medicinal or non-medicinal preparations intended or likely to be put in contact with natural rubber latex condoms - Compatibility - Specifications and test methods.
NF C93-474-20:1997 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 16 : MECHANICAL TESTS ON CONTACTS AND TERMINATIONS. SECTION 20 : TEST 16T : MECHANICAL STRENGTH (WIRED TERMINATION OF SOLDERLESS CONNECTIONS). (EUR
XP X41-565-2*XP CEN/TS 15119-2:2012 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 2 : Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method
NF EN 60512-16-20:1997 Composants électromécaniques pour équipements électroniques. Procédures d'essai de base et méthodes de mesure - Partie 16 : essais mécaniques des contacts et des sorties. Section 20 : essai 16t : tenue mécanique (sortie câblée de connexions ...
NF P98-818-28:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 28 : preparation of samples for determining binder content, water content and grading.
NF EN 13880-11:2003 Produits de scellement de joints appliqués à chaud - Partie 11 : méthode d'essai pour la préparation des blocs d'enrobés destinés au test fonctionnel et pour la détermination de compatibilité avec les revêtements bitumineux
NF EN 12873-1:2014 Influence des matériaux en contact sur l'eau destinée à la consommation humaine - Influence de la migration - Partie 1 : méthode d'essai des matériaux de fabrication industrielle constitués de ou contenant des matériaux organiques ou vitreux (...
NF P98-880-11*NF EN 13880-11:2003 Hot applied joint sealants - Part 11 : test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements

GM Daewoo, Preparation method of contact plate

GMKOREA EDS-T-7529-2011 Test Method of PVC Molding Which is in Contact with Glass

International Organization for Standardization (ISO), Preparation method of contact plate

ISO 1268-2:2001 Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding
ISO/IEC 18745-2:2021 Test methods for machine readable travel documents (MRTD) and associated devices — Part 2: Test methods for the contactless interface
ISO 6486-1:2019 Ceramic ware in contact with food — Release of lead and cadmium — Part 1: Method of test
ISO 4531:2018 Vitreous and porcelain enamels - Release from enamelled articles in contact with food - Methods of test and limits
ISO 4531:2022 Vitreous and porcelain enamels — Release from enamelled articles in contact with food — Methods of test and limits
ISO 7086-1:2000 Glass hollowware in contact with food - Release of lead and cadmium - Part 1: Test method
ISO/IEC 10373-3:2018 Identification cards — Test methods — Part 3: Integrated circuit cards with contacts and related interface devices
ISO/IEC 18745-2:2016 Information technology - Test methods for machine readable travel documents (MRTD) and associated devices - Part 2: Test methods for the contactless interface
ISO/IEC 10373-3:2010 Identification cards - Test methods - Part 3: Integrated circuit cards with contacts and related interface devices
ISO 13732-1:2006 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces
ISO 6486-1:1999 Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food - Release of lead and cadmium - Part 1: Test method
ISO/IEC 10373-3:2010/Cor 1:2013 Identification cards - Test methods - Part 3: Integrated circuit cards with contacts and related interface devices; Technical Corrigendum 1
ISO 5497:1982 Sensory analysis; Methodology; Guidelines for the preparation of samples for which direct sensory analysis is not feasible
ISO 15792-2:2000 Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test specimens in steel
ISO 15792-1:2020 Welding consumables — Test methods — Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys
ISO 15792-2:2020 Welding consumables — Test methods — Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel

ES-UNE, Preparation method of contact plate

UNE-EN 1217:1997 MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - TEST METHODS FOR WATER ABSORPTION OF CERAMIC ARTICLES (Endorsed by AENOR in December of 1997.)
UNE-EN 13258:2003 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles.
UNE-EN 1184:1997 MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - TEST METHODS FOR TRANSLUCENCY OF CERAMIC ARTICLES (Endorsed by AENOR in August of 1997.)
UNE-EN 50003:1973 LOW VOLTAGE SWITCHGEAR END CONTROLGEAR FOR INDUSTRIAL USE. DIMENSIONS. FIXING HOLES OF MOTOR CONTACTORS. (Endorsed by AENOR in September of 1994.)
UNE-EN 50002:1972 LOW VOLTAGE SWITCHGEAR END CONTROLGEAR FOR INDUSTRIAL USE. DIMENSIONS. FIXING HOLES OF CONTACTOR RELAYS. (Endorsed by AENOR in September of 1994.)
UNE-EN ISO 4531:2023 Vitreous and porcelain enamels - Release from enamelled articles in contact with food - Methods of test and limits (ISO 4531:2022)
UNE-EN 12980:2000 Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance (Endorsed by AENOR in August of 2000.)
UNE-EN 1186-2:2023 Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration in vegetable oils
UNE-EN 13880-6:2019 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing
UNE-EN 60947-5-4:2005/A1:2020 Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests
UNE-EN 1186-3:2023 Materials and articles in contact with foodstuffs - Plastics - Part 3: Test methods for overall migration in evaporable simulants
UNE-EN 16105:2023 Paints and varnishes - Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water
UNE-EN 15284:2007 Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastics cookware (Endorsed by AENOR in June of 2007.)
UNE-EN IEC 63203-406-1:2022 Wearable electronic devices and technologies - Part 406-1: Test method for measuring surface temperature of wrist-worn wearable electronic devices while in contact with human skin (Endorsed by Asociación Española de Normalización in March of 2022.)
UNE-EN ISO 15792-2:2021 Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020)
UNE-EN ISO 15792-1:2021 Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Preparation method of contact plate

GB/T 27797.2-2011 Fibre-reinforced plastics.Methods of producing test plates.Part 2:Contact and spray-up moulding
GB/T 17554.3-2006 Identification cards - Test methods - Part 3: Integrated circuit(s) cards with contacts and related interface devices
GB 12314-1990 Guidelines for the preparation of samples that cannot be directly analyzed by sensory analysis methods
GB/T 12314-1990 Sensory analysis method--Guidelines for the preparation of samples for which direct sensory analysis is not feasible
GB/T 14048.17-2008 Low-voltage switchgear and controlgear.Part 5-4:Control circuit devices and switching elements.Method of assessing the performance of low-formance of low-energy contacts.Special tests
GB/T 5095.8-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
GB/T 5095.15-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 15: Mechanical tests on contacts and terminations. Section 8: Test 15h--Contact retention system resistance to tool application
GB/T 4958.5-1988 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2:Measurements for sub-systems--Section Four--Frequency modulators

Japanese Industrial Standards Committee (JISC), Preparation method of contact plate

JIS R 2207-1:2007 Test methods for thermal expansion of refractory products -- Part 1: Non-contact method
JIS R 2207-2:2007 Test methods for thermal expansion rate of refractory products -- Part 2: Contact method using cylinder test piece
JIS R 2207-3:2007 Test methods for thermal expansion of refractory products -- Part 3: Contact method using rod test piece
JIS Z 3129:2005 Test method and preparation of test specimens for single-run and two-run welding technique in steel

European Committee for Standardization (CEN), Preparation method of contact plate

DD ENV 13258-1998 Materials and Articles in Contact with Foodstuffs - Test Methods for Crazing Resistance of Ceramic Articles
EN ISO 4531:2022 Vitreous and porcelain enamels - Release from enamelled articles in contact with food - Methods of test and limits (ISO 4531:2022)
EN 13880-6:2004 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing
prEN ISO 4531:2021 Vitreous and porcelain enamels - Release from enamelled articles in contact with food - Methods of test and limits (ISO/DIS 4531:2021)
EN ISO 14729:2001 Ophthalmic Optics - Contact Lens Care Products - Microbiological Requirements and Test Methods for Products and Regimens for Hygienic Management of Contact Lenses ISO 14729:2001
EN ISO 14729:2001/A1:2010 Ophthalmic optics - Contact lens care products - Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses - Amendment 1 (ISO 14729:2001/Amd 1:2010)
DD ENV 1186-13-1999 Materials and Articles in Contact with Foodstuffs - Plastics - Part 13: Test Method for Overall Migration at High Temperatures
EN ISO 13732-3:2005 Ergonomic of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces
prEN 16105-2021 Paints and varnishes - Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water
PD CEN/TS 14234:2002 Materials and articles in contact with foodstuffs - Polymeric coatings on paper and board - Guide to the selection of conditions and test methods for overall migration
EN 16105:2023 Paints and varnishes - Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water
DD ENV 1186-4-1994 Materials and Articles in Contact with Foodstuffs - Plastics - Part 4: Test Methods for Overall Migration into Olive Oil by Cell
DD ENV 1186-14-1999 Materials and Articles in Contact with Foodstuffs - Plastics - Part 14: Test Methods for "Substitute Tests" for Overall Migration from Plastics Intended to Come Into Contact with Fatty Foodstuffs Using Test Media Iso-Octane and 95% Ethanol
EN 15284:2007 Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastics cookware
EN ISO 15792-2:2020 Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020)
DD ENV 1186-8-1994 Materials and Articles in Contact with Foodstuffs - Plastics - Part 8: Test Methods for Overall Migration into Olive Oil by Article Filling Superseded by EN 1186-8: 2002
DD ENV 1186-12-1995 Materials and Articles in Contact with Foodstuffs - Plastics - Part 12: Test Methods for Overall Migration at Low Temperatures Superseded by BS EN 1186-12: 2002
DD ENV 1186-11-1995 Materials and Articles in Contact with Foodstuffs - Plastics - Part 11: Test Methods for Overall Migration into Mixtures of 14C-Labelled Synthetic Triglycerides
CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1: General considerations
DD ENV 1186-10-1994 Materials and Articles in Contact with Foodstuffs - Plastics - Part 10: Test Methods for Overall Migration into Olive Oil (Modified Method for Use in Cases Where Incomplete Extraction of Olive Oil Occurs)
EN 1597-2:1997 Welding Consumables - Test Methods - Part 2: Preparation of Test Piece for Single-Run and Two-Run Technique Test Specimens in Steel
DD ENV 1186-9-1994 Materials and Articles in Contact with Foodstuffs - Plastics - Part 9: Test Methods for Overall Migration into Aqueous Food Simulants by Article Filling Superseded by EN 1186-9:2002
EN ISO 8503-4:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast -Cleaned Steel Substrates - Part 4: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of
EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
DD ENV 1186-2-1994 Materials and Articles in Contact with Foodstuffs - Plastics - Part 2: Test Methods for Overall Migration into Olive Oil by Total Immersion Superseded by BS EN 1186-2: 2002
DD ENV 1186-1-1994 Materials and Articles in Contact with Foodstuffs - Plastics - Part 1: Guide to the Selection of Conditions and Test Methods for Overall Migration Superseded by BS EN 1186-1: 2002
CEN/TS 16663:2016 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field method
EN ISO 13732-1:2006 Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfaces
DD ENV 1186-5-1994 Materials and Articles in Contact with Foodstuffs - Plastics - Part 5: Test Methods for Overall Migration into Aqueous Food Simulants by Cell Superseded by EN 1186-5:2002
DD ENV 1186-3-1994 Materials and Articles in Contact with Foodstuffs - Plastics - Part 3: Test Methods for Overall Migration into Aqueous Simulants by Total Immersion Superseded by BS EN 1186-3: 2002
DD ENV 13130-1-1999 Materials and Articles in Contact with Foodstuffs - Plastics Substances Subject to Limitation - Part 1: Guide to the Test Methods for the Specific Migration of Substances from Plastics into Foods and Food Simulants and the Determination of Substances
DD ENV 1186-7-1994 Materials and Articles in Contact with Foodstuffs - Plastics - Part 7: Test Methods for Overall Migration into Aqueous Simulants Using a Pouch Superseded by EN 1186-7:2002
PD CEN/TR 16663:2014 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field method
EN 50010:1987 Low voltage switchgear and controlgear for industrial use; Inductive proximity switches : Methods for measuring the operating distance and operating frequency
PD CEN/TS 15119-2:2012 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 2: Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method
EN ISO 12836:2015 Dentistry - Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy
EN ISO 15792-2:2008 Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test specimens in steel [Superseded: CEN EN 1597-2, CEN EN 1597-2]

RU-GOST R, Preparation method of contact plate

GOST 24606.3-1982 Switching and mocenting components, and electrical connectors. Methods of measurement of contact resistance, and dynamic and static instability of contact transient resistance
GOST R ISO/IEC 10373-3-2011 Identification cards. Test methods. Part 3. Integrated circuit cards with contacts and related interface devices
GOST R 57222-2016 Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials
GOST 2189-1978 Foundry sands. Reception rules. Methods of sampling and sample preparation for testing
GOST R 50030.5.4-2011 Low-voltage switchgear and controlgear. Part 5-4. Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests
GOST IEC 60947-5-4-2014 Low-voltage switchgear and controlgear. Part 5-4. Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests
GOST R 12.4.297-2013 Occupational safety standards system. Clothing for protection against high temperature of radiant, convective heat, molten splashes of metal, contact heat, limited flame spread. Technical requirements and test methods
GOST IEC/TS 61000-3-5-2013 Electromagnetic compatibility of technical equipment. Limitation of voltage fluctuation and flicker, caused by technical equipment with rated current greater than 75 A connected to low-voltage power supply systems. Limits and test methods
GOST R 50745-1995 Electromagnetic compatibility of technical equipment. Uninterrupted power supply systems of a.c. receivers and pulse interference suppression equipment for power supply networks. Technical requirements and test methods
GOST R 51317.3.12-2006 Electromagnetic compatibility of technical equipment. Limitation of harmonic currents produced by equipment with input current greater than 16A and not greater than 75 A per phase connected to public low-voltage supply systems. Limits and test methods

Standard Association of Australia （SAA）, Preparation method of contact plate

AS ISO/IEC 18745.2:2023 Test methods for machine readable travel documents (MRTD) and associated devices, Part 2: Test methods for the contactless interface
AS 60947.5.4:2004 Low-voltage switchgear and controlgear - Control circuit devices and switching elements - Methods of assessing the performance of low-energy contacts - Special tests
AS/NZS IEC 60947.5.4:2015

CZ-CSN, Preparation method of contact plate

CSN 35 4055 Cast.3-1984 Electromechanical components forelectronic equipment. Contact resistance - Millivolt level method and specified test current method
CSN IEC 512-8:1994 Electromechanical components for electronic equipment, basic testing procedures and measuring methods. Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations

PT-IPQ, Preparation method of contact plate

NP EN 60947-5-4-2000 Low-valtage switchgear and controlgear Part 5:Control circuit devices and switching elements Section 4:Methods of assessing the performance of low energe contacts-Special tests(IEC 60947-5-4:1996)

TH-TISI, Preparation method of contact plate

TIS 32-1985(en) CERAMIC WARE IN CONTACT WITH FOOD : PERMISSIBLE LIMITS AND METHOD OF TEST FOR LEAD AND CADMIUM
TIS 32-2003 Test method for the release of lead and cadmium from ceramic ware, glass-ceramic ware and glassware in contact with food.[ISO title:ceramic ware, glass-ceramic ware and glass dinnerware in contact with food.release of lead and cadmium.part 1: test method]
TIS 2579.2-2013 Welding consumables-test methods-part 2:preparation of single-run and two-run technique test specimens in steel

International Electrotechnical Commission (IEC), Preparation method of contact plate

IEC TR2 60947-5-4:1996 Low-voltage switchgear and controlgear - Part 5: Control circuit devices and switching elements - Section 4: Method of assessing the performance of low-energy contacts - Special tests
IEC 60947-5-4:2002+AMD1:2019 CSV Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests
IEC 62899-301-2:2017 Printed electronics - Part 301-2: Equipment - Contact printing - Rigid master - Measurement method of plate master pattern dimension
IEC 62899-301-1:2017 Printed electronics - Part 301-1: Equipment - Contact printing - Rigid master - Measurement method of plate master external dimension
IEC 60947-5-4:2002 Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements; Method of assessing the performance of low-energy contacts; Special tests
IEC 60512-8:1993 Electromechanical components for electronic equipment; basic testing procedures and measuring methods; part 8: connector tests (mechanical) and mechanical tests on contacts and terminations
IEC 60947-5-4:2002/AMD1:2019 Amendment 1 - Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests
IEC 63203-406-1:2021 Wearable electronic devices and technologies - Part 406-1: Test method for measuring surface temperature of wrist-worn wearable electronic devices while in contact with human skin
IEC 60512-16-20:1996 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections)

GOSTR, Preparation method of contact plate

GOST R 58343-2019 Information Technology. Test methods for machine readable travel documents (MRTD) and associated devices. Part 2. Test methods for the contactless interface

YU-JUS, Preparation method of contact plate

JUS N.R4.465-1980 Elektromechanical components for electronic equipment. Test methods. Test 16 g: Measurement of contact deformation after crimping
JUS N.R4.458-1991 Electromechanical components for electronic equipment. Test methods. Test 15 e: Contact retention in insert, cable nutation

CEN - European Committee for Standardization, Preparation method of contact plate

EN ISO 4531:2018 Vitreous and porcelain enamels - Release from enamelled articles in contact with food - Methods of test and limits
PREN 13880-6-2017 Hot applied joint sealants - Part 6: Method for the preperation of samples for testing

机械电子工业部, Preparation method of contact plate

JB/T 5875-1991 How to draw wiring diagrams and wiring tables for low-voltage complete switchgear

未注明发布机构, Preparation method of contact plate

BS ISO/IEC 10373-6:2020+A2:2020 Cards and security devices for personal identification — Test methods Part 6 : Contactless proximity objects

IN-BIS, Preparation method of contact plate

IS 9806-1981

VN-TCVN, Preparation method of contact plate

TCVN 7147-1-2002 Glass hollowware in contact with food.Release of lead and cadmium.Part 1: Test method
TCVN 7148-1-2002 Ceramic cookware in contact with food.Release of lead and cadmium.Part 1: Method of test
TCVN 7146-1-2002 Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food.Release of lead and cadmium.Part 1: Test method

Association of German Mechanical Engineers, Preparation method of contact plate

DVS 2207-6-2003 "Welding of thermoplastics - Non-contact heated tool butt welding of pipes, pipeline components and sheets - Methods, equipment, parameters"

AT-ON, Preparation method of contact plate

OENORM EN ISO 4531:2021 Vitreous and porcelain enamels - Release from enamelled articles in contact with food - Methods of test and limits (ISO/DIS 4531:2021)
OENORM EN 16105-2021 Paints and varnishes - Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water
OENORM EN ISO 15792-1:2021 Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020)
OENORM EN ISO 15792-2:2021 Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020)

Indonesia Standards, Preparation method of contact plate

SNI ISO/IEC 10373-3:2015 Identification cards - Test methods - Part 3: Integrated circuit cards with contacts and related interface devices

American Society for Testing and Materials (ASTM), Preparation method of contact plate

ASTM E2625-09 Standard Practice for Controlling Occupational Exposure to Respirable Crystalline Silica for Construction and Demolition Activities
ASTM D8271-19 Standard Test Method for the Direct Measurement of Surface Profile of Prepared Concrete
ASTM D8271-21 Standard Test Method for the Direct Measurement of Surface Profile of Prepared Concrete
ASTM E154/E154M-08a(2013)e1 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
ASTM B812-96 Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
ASTM B812-96(2002)e1 Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
ASTM B812-96(2008) Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
ASTM B812-96(2013) Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
ASTM D6480-99 Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Concentration by Transmission Electron Microscopy
ASTM D6480-05 Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Concentration by Transmission Electron Microscopy
ASTM D6480-19 Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy
ASTM D6480-05(2010) Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Concentration by Transmission Electron Microscopy

Korean Agency for Technology and Standards (KATS), Preparation method of contact plate

KS C IEC 62899-301-2:2021 Printed electronics — Part 301-2: Equipment — Contact printing —Rigid master — Measurement method of plate master pattern dimension
KS C IEC 62899-301-1:2021 Printed electronics — Part 301-1: Equipment — Contact printing —Rigid master — Measurement method of plate master external dimension
KS B ISO 15792-2:2004 Welding consumables-Test methods-Part 2:Preparation of single-run and two-run technique test specimens in steel
KS B ISO 15792-2:2013 Welding consumables－Test methods－Part 2：Preparation of single-run and two-run technique test specimens in steel
KS C IEC 60512-15-8-2004(2009) Electromechanical component for electronic equipment－Basic testing procedures and measuring methods－Part 15：Mechanical tests on contacts and terminations－Section 8：Test 15h－Contact retention system re
KS Q ISO 5497:2003 Sensory analysis - methodology－Guideline for the preparation of samples for which direct sensory analysis is not feasible
KS C IEC 60512-8:2004 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 8:Conenctor tests(mechanical) and mechanical tests on contacts and terminations
KS C IEC 60512-8:2014 Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 8：Conenctor tests(mechanical) and mechanical tests on contacts and terminations
KS E ISO 10835:2008 Direct reduced iron and hot briquetted iron-Sampling and sample preparation
KS M ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 4：Method for the calibration of ISO surface profile comparators and for the determination of surface
KS C IEC 60512-8-2004(2009) Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 8：Conenctor tests(mechanical) and mechanical tests on contacts and terminations
KS C IEC 60512-16-20:2005 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 16:Mechanical tests on contacts and terminations-Section 20:Test 16t:Mechanical strength(wired termination of solderless connections)
KS C IEC 60512-16-20:2014 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 16:Mechanical tests on contacts and terminations-Section 20:Test 16t:Mechanical strength(wired termination of solderless connections)
KS B ISO 9692-3:2004 Welding and allied processes-Recommendations for joint preparation-Part 3:Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
KS C IEC 60512-16-20-2005(2010) Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 16：Mechanical tests on contacts and terminations－Section 20：Test 16t：Mechanical strength(wired

KR-KS, Preparation method of contact plate

KS C IEC 62899-301-1-2021 Printed electronics — Part 301-1: Equipment — Contact printing —Rigid master — Measurement method of plate master external dimension
KS C IEC 62899-301-2-2021 Printed electronics — Part 301-2: Equipment — Contact printing —Rigid master — Measurement method of plate master pattern dimension
KS X IEC 63203-406-1-2023 Wearable electronic devices and technologies — Part 406-1: Test method for measuring surface temperature of wrist-worn wearable electronic devices while in contact with human skin

IX-EU/EC, Preparation method of contact plate

80/766/EEC-1980 Commission Directive Laying Down the Community Method of Analysis for the Official Control of the Vinyl Chloride Monomer Level in Materials and Articles Which are Intended to Come into Contact with Foodstuffs
M 052-1995 STANDARDIZATION MANDATE TO CEN CONCERNING METHODS OF ANALYSIS FOR MATERIALS AND ARTICLES INTENDED TO COME INTO CONTACT WITH FOODSTUFFS

International Telecommunication Union (ITU), Preparation method of contact plate

ITU-T G.230-1993 MEASURING METHODS FOR NOISE PRODUCED BY MODULATING EQUIPMENT AND THROUGH-CONNECTION FILTERS
ITU-T G.230 FRENCH-1993 MEASURING METHODS FOR NOISE PRODUCED BY MODULATING EQUIPMENT AND THROUGH-CONNECTION FILTERS
ITU-T G.230 SPANISH-1993 MEASURING METHODS FOR NOISE PRODUCED BY MODULATING EQUIPMENT AND THROUGH-CONNECTION FILTERS
ITU-T G.230-1989 Measuring Methods for Noise Produced by Modulating Equipment and Through-Connection Filters - International Analogue Carrier Systems Study Group 15

American National Standards Institute （ANSI), Preparation method of contact plate

ANSI/ISO/IEC 10373-3:2001 Identification cards - Test methods - Part 3: Integrated circuit(s) cards with contacts and related interface devices Adopted by INCITS

CENELEC - European Committee for Electrotechnical Standardization, Preparation method of contact plate

EN 60947-5-4:1997 Low-Voltage Switchgear and Controlgear Part 5: Control Circuit Devices and Switching Elements Section 4: Methods of assessing the Perfomance of Low Energy Contacts Special Tests
PREN 50561-2-2015 Powerline communication apparatus used in low voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 2: Apparatus for access-network use

ANSI - American National Standards Institute, Preparation method of contact plate

INCITS/ISO/IEC 10373-3:2001 Identification cards - Test methods - Part 3: Integrated circuit(s) cards with contacts and related interface devices (Adopted by INCITS)

Professional Standard - Post and Telecommunication, Preparation method of contact plate

YD/T 3236-2017 Testing method for service-aware and controlling technology of broadband network access server

Canadian Standards Association (CSA), Preparation method of contact plate

CSA ISO/IEC 10373-6:2021 Cards and security devices for personal identification - Test methods - Part 6: Contactless proximity objects (Adopted ISO/IEC 10373-6:2020, fourth edition, 2020-07)

Taiwan Provincial Standard of the People's Republic of China, Preparation method of contact plate

CNS 14409-2000 Limits and methods of measurement of immunity characteristics of sound and television broadcast receivers and associated equipment

PL-PKN, Preparation method of contact plate

PN T04503-1991 limits and methods of measurement of immunity characteristics of sound and television broadcast receivers and associated equipment
PN-EN ISO 15792-2-2021-03 E Welding consumables -- Test methods -- Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020)
PN-EN ISO 15792-1-2021-03 E Welding consumables -- Test methods -- Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020)

European Committee for Electrotechnical Standardization（CENELEC）, Preparation method of contact plate

EN 60947-5-4:2003 Low-voltage switchgear and controlgear Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests
EN 60512-16-20:1996 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 16: Mechanical Tests on Contacts and Terminations Section 20: Test 16t: Mechanical Strength (Wired Termination of Solderless Connections)
HD 477.2.4 S1-1988 Methods of Measurement of Equipment Used in Terrestrial Radio-Relay Systems - Part 2: Measurements for Sub- Systems Section Four - Frequency Modulators

IT-UNI, Preparation method of contact plate

UNI EN ISO 15792-2:2021 Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel
UNI EN ISO 15792-1:2021 Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys

RO-ASRO, Preparation method of contact plate

STAS SR CISPR 13+A1+A2 Limits 'and methods of measurement of radio interference characteristics of sound and television broadcast receivers and associated equipments
STAS 12743/2-1989 Electromechanical components for electronic equipment BASIC TESTING PROCEDURES AND MEASURING METHODS General examination, electrical continuity and contact resistance tests insulation tests and voltage stress tests

工业和信息化部, Preparation method of contact plate

YD/T 3685-2020 Application access control network element (AAC) equipment testing method for mobile network capability exposure based on Policy and Charging Control (PCC) architecture

ESDU - Engineering Sciences Data Unit, Preparation method of contact plate

ESDU 88033-1988 The design of spur and helical involute gears. A procedure compatible with BS 436:1986 - method for calculation of contact and root bending stress limitations for metallic involute gears.
ESDU 88033 A-2012 The design of spur and helical involute gears. A procedure compatible with BS 436: Part 3: 1986 – method for calculation of contact and root bending stress limitations for metallic involute gears

SE-SIS, Preparation method of contact plate

SIS SS EN 50 010-1989 Low-voltage switchgear and controlgear for industrial use — Inductive proximity switches — Methods for measuring the operating distance and operating frequency
SIS SS-EN 55 013-1991 Radio interference - Limits and methods of measurement of radio disturbance characteristics ofbroadcast receivers and associated equipment

AT-OVE/ON, Preparation method of contact plate

OVE EN IEC 63203-406-1:2021 Wearable electronic devices and technologies - Part 406-1: Test method for measuring surface temperature of wrist worn wearable electronic devices while in contact with human skin (IEC 124/125/CDV) (english version)

Professional Standard - Electron, Preparation method of contact plate

SJ/Z 9094.5-1987 Methods of measurement for equipment used in terestrial radio-relay systems--Part 2: Measurements for sub-systems--Section 4: Frequency modulators