ZH
RU
ES

Negative electrode capacity

Negative electrode capacity, Total:167 items.

In the international standard classification, Negative electrode capacity involves: Powder metallurgy, Products of the textile industry, Leather technology, Lubricants, industrial oils and related products, Galvanic cells and batteries, Electronic tubes, Semiconductor devices, Linear and angular measurements, Aerospace electric equipment and systems, Materials for aerospace construction, Non-destructive testing, Rotating machinery, Environmental protection, Ceramics, Capacitors, Medical equipment, Inorganic chemicals, Structures of buildings, Electrical wires and cables, Geology. Meteorology. Hydrology, Vacuum technology, Bearings, Non-ferrous metals, Metalliferous minerals, Gears, Waxes, bituminous materials and other petroleum products, Electromagnetic compatibility (EMC), Earth-moving machinery, Installations in buildings, Shafts and couplings, Products of non-ferrous metals, Internal combustion engines, Piezoelectric and dielectric devices, Special purpose vehicles, Integrated circuits. Microelectronics, Iron and steel products, Inland navigation vessels, Equipment for petroleum and natural gas industries.

Professional Standard - Non-ferrous Metal, Negative electrode capacity

YS/T 484-2005 Method for measuring the discharge capacity of the hydrogen storage alloys as the negative electrode of the metal hydride-nickel battery

American Society for Testing and Materials (ASTM), Negative electrode capacity

ASTM F2153-01 Standard Test Method for Measurement of Backpack Capacity
ASTM F2490-20 Standard Guide for Aircraft Electrical Load and Power Source Capacity Analysis
ASTM D6121-10 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles

CZ-CSN, Negative electrode capacity

CSN 35 8736-1964 Semiconductor diodes. Measurement of interelectrode capacitanoe
CSN 35 8785-1975 Semiconductor devices. Varicaps. Measurement of thermal capacitance coefflcient.
CSN 35 8786-1983 Varicaps. Electric parameter measurement methods
CSN 35 8757 Cast.5-1985 Transistors. Method of measuring collector and emitter barrier layer capacltance
CSN 35 8757 Cast.10-1986 Transistors. Methods for measurement of output capaclty In common base connection
CSN 42 0630 Cast.6-1984 Chemical analysis of non-ferrous metals and alloys. Zinc alloys. Determination of cadmium by the atomic absorption method, polarographic method and volumetric method
CSN 44 1756-1988 Copper ores and concentrates. Antimony determination
CSN 35 8752-1976 Semiconductor devices. Transistors. Measuring methods for common base output capacitance.

CH-SNV, Negative electrode capacity

SEV 3015-1962

United States Navy, Negative electrode capacity

NAVY MIL-G-81827 A VALID NOTICE 1-1991 GREASE, AIRCRAFT, HIGH LOAD CAPACITY, WIDE TEMPERATURE RANGE
NAVY MIL-G-81827 A-1983 GREASE, AIRCRAFT, HIGH LOAD CAPACITY, WIDE TEMPERATURE RANGE
NAVY MIL-E-7016 F (1)-1981 ELECTRIC LOAD AND POWER SOURCE CAPACITY, AIRCRAFT, ANALYSIS OF
NAVY MIL-E-7016 F-1976 ELECTRIC LOAD AND POWER SOURCE CAPACITY, AIRCRAFT, ANALYSIS OF
NAVY MIL-E-7016 F VALID NOTICE 1-1988 ELECTRIC LOAD AND POWER SOURCE CAPACITY, AIRCRAFT, ANALYSIS OF [Use In Lieu Of: NAVY MIL-E-007016 E]
NAVY MIL-M-2082 C VALID NOTICE 1-1992 METERS, FLOW, MECHANICAL, VOLUMETRIC POSITIVE DISPLACEMENT, LIQUID, COLD WATER AND HOT WATER TYPE, NAVAL SHIPBOARD USE
NAVY MIL-M-2082 C-1984 METERS, FLOW, MECHANICAL, VOLUMETRIC POSITIVE DISPLACEMENT, LIQUID, COLD WATER AND HOT WATER TYPE, NAVAL SHIPBOARD USE

Military Standard of the People's Republic of China-General Armament Department, Negative electrode capacity

GJB 860A-2006 Analysis for electric load and power source capacity of aircraft
GJB 860-1990 Aircraft electrical load and power capacity analysis

国家市场监督管理总局、中国国家标准化管理委员会, Negative electrode capacity

GB 24427-2021 Content limitation of mercury, cadmium and lead for zinc anode primary battery
GB/T 21663-2019 Specific requirements for small capacity cylindrical rotor synchronous machines

PL-PKN, Negative electrode capacity

PN T01504-22-1987 Transistors Measuring methods Collector-base and emitter-base capacitances Ccbo and Cebo
PN E83006-03-1991 Lead-acid batteriesDimensions and capacities of batteries with pasted positive
PN E83006-02-1991 Lead-acid traction batteries Dimensions and capacities of batteries with tubular positives plates

ECIA - Electronic Components Industry Association, Negative electrode capacity

535ABAE-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode Silver Case@ Axial Lead@ Elastomeric Seal@ Polarized@ Nickel Positive@ Copper Negative Leads@ Insulated
191-D-1985 Measurement of Direct Interelectrode Capacitances of Electron Tubes

International Electrotechnical Commission (IEC), Negative electrode capacity

IEC 60100:1962 Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves
IEC 60100:1962/AMD1:1969 Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves
IEC 60444-11:2010 Measurement of Quartz crystal unit parameters - Part 11: Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer technique and error correction

U.S. Military Regulations and Norms, Negative electrode capacity

ARMY QPL-46150-19-2005 LUBRICANT, WEAPONS, SEMI-FLUID (HIGH LOAD CARRYING CAPACITY)

German Institute for Standardization, Negative electrode capacity

DIN 29571-3:1990-10 Aerospace; electrical equipment; analysis of load and power source capacity
DIN 45910-127:1994-01 Harmonized system of quality assessment for electronic components; detail specification: Polar aluminium electrolytic capacitors with non solid electrolyte, DC 40 to 100 V (suitable to V a.c. load without using a polarizing potential), general-purpose ...
DIN VDE 0276-1000:1995 Power cables - Part 1000: Current-carrying capacity, general, conversion factors
DIN 40734:1999 Lead acid batteries - Stationary vented cells with positive grid plates - Cells in plastic containers; rated capacities, main dimensions, weights
DIN 40736-1:1992 Lead acid batteries; stationary cells with positive tubular plates; cells in plastic-containers; rated capacities, main dimensions, weights
DIN 40736-2:1992 Lead acid batteries; stationary cells with positive tubular plates; cells in hard-rubber containers; rated capacities, main dimensions, weights
DIN 40739:1999-07 Lead acid batteries - Stationary vented batteries with positive grid plates - Rated capacities, main dimensions, weights
DIN EN 12831 Bb.2:2012 Heating systems in buildings - Method for calculation of the design heat load - Supplement 2: Simplified method for calculation of the design heat load and the heat generator capacity
DIN 43598-1:1993 Lead-acid traction batteries 6 V and 12 V; monobloc batteries with tubular positive plates; nominal capacities, main dimensions, weights
DIN 43598-1:1993-06 Lead-acid traction batteries 6 V and 12 V; monobloc batteries with tubular positive plates; nominal capacities, main dimensions, weights
DIN 40738:1991 Lead storage batteries; stationary cells with positive plante plates, narrow plate distance; rated capacities, main dimensions
DIN 40737-3:1999 Lead acid batteries - Stationary batteries with positive tubular plates - Part 3: Vented batteries in plastic-monobloc-containers; rated capacities, main dimensions, weights
DIN 40744:1999 Lead acid batteries - Stationary valve regulated batteries with positive tubular plates and immobilized electrolyte in plastic-monobloc containers - Rated capacities, main dimensions, weights
DIN 40771-1:2013 Vented nickel-cadmium-accumulators.Part 1: Cells in plastic containers with pocket type plates.Rated capacities.Main dimensions
DIN EN 846-4:2005 Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps; German version EN 846-4:2001 + A1:2004
DIN 40739:1999 Lead acid batteries - Stationary vented batteries with positive grid plates - Rated capacities, main dimensions, weights
DIN EN 3774-003:1999-08 Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 I<(Index)n> - Part 003: Metric thread terminals; product standard; German version EN 3774-003:1999 / Note: Applies in conj...
DIN 45910-125:1992 Harmonized system of quality assessment for electronic components; detail specification: non-polar aluminium electrolytic capacitors with non-solid electrolyte DC 40 to 100 V (suitable to V a.c. load without using a polarizing potential), general-purpose
DIN 40741-1:1999-07 Lead-acid batteries - Stationary valve regulated batteries with positive grid plates and immobilized electrolyte for industrial application - Rated capacities, main dimensions, weights
DIN 40768:1969-09 Alkaline storage batteries; 6 V and 12 V sealed nickel-cadmium batteries, button cells with pasted plates, capacities, main dimensions, technical data
DIN 40742:1999 Lead acid batteries - Stationary valve regulated batteries with positive tubular plates and immobilized electrolyte - Rated capacities, main dimensions, weights
DIN EN 3774-001:1999 Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 I<(Index)n> - Part 001: Technical specification; German version EN 3774-001:1999
DIN 45910-127:1994 Harmonized system of quality assessment for electronic components; detail specification: Polar aluminium electrolytic capacitors with non solid electrolyte, DC 40 to 100 V (suitable to V a.c. load without using a polarizing potential), general-purpose gra

RU-GOST R, Negative electrode capacity

GOST 18986.12-1974 Semiconductor tunnel diodes. Method for measuring negative conductance of the intrinsic diode
GOST 22091.13-1984 X-ray devices. The method of measuring of grid-cathode capacity
GOST 18604.3-1980 Transistors bipolar. Methods for measuring collector and emitter capacitances
GOST 21106.13-1978 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Methods of measurement of direct interelectrode capacitances

American Gear Manufacturers Association, Negative electrode capacity

AGMA 96FTM11-1996 DIN 3996: A New Standard for Calculating the Load Capacity of Worm Gears

Japanese Industrial Standards Committee (JISC), Negative electrode capacity

JIS B 7421:1971 Tolerances allowable deviations and permissible wears of limit gauges
JIS A 8909:2012 Earth-moving machinery -- Laboratory evaluations of protective structures -- Specifications for deflection-limiting volume
JIS A 8909:2017 Earth-moving machinery -- Laboratory evaluations of protective structures -- Specifications for deflection-limiting volume
JIS H 7205:2003 Method of measuring discharge capacity of hydrogen absorbing alloys for a negative electrode of a rechargable nickel-metal hydride battery

CU-NC, Negative electrode capacity

NC 91-37-1985 Unit Loading. Tank Containers of 20 m3 Capacity, Type IC for Low-Risk Llauids. Quality Specifications

TR-TSE, Negative electrode capacity

TS 2971-1978 Methods For The Measurement Of Direct Interelectrode Capacitances Of Electronic Tubes And Valves
TS 2363-1976 RULES POR MEASUREMET OF HORIZONTAL ANGLES ?N TRIANGULATION NETWORK AND ACCEPTABLE ERROR LIMITS

European Committee for Electrotechnical Standardization（CENELEC）, Negative electrode capacity

HD 148 S2-1977 Methods for the Measurement of Direct Interelectrode Capacitances of Electronic Tubes and Valves
EN 60444-11:2010 Measurement of quartz crystal unit parameters - Part 11: Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction

Electronic Components, Assemblies and Materials Association, Negative electrode capacity

ECA 191-D-1985 Measurement of Direct Interelectrode Capacitances of Electron Tubes
ECA 535ABAE-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode Silver Case, Axial Lead, Elastomeric Seal, Polarized, Nickel Positive, Copper Negative Leads, Insulated

Group Standards of the People's Republic of China, Negative electrode capacity

T/EERT 013-2021 Regulation of water environmental capacity and pollution load allocation in small and medium-sized towns

Danish Standards Foundation, Negative electrode capacity

DS/INF 53:1990 General-purpose flat pallets for through transit of goods. Performance requirements
DS/EN 60444-11:2011 Measurement of quartz crystal unit parameters - Part 11: Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Negative electrode capacity

GB 14147-1993 Standard permissible limits of release of lead or cadmium from ceramic packaging vessel in contact with food
GB/T 21663-2008 Specific requirements for small capacity cylindrical rotor synchronous machines in energy save and environment protection projects
GB/T 19956.2-2005 Positive-displacement vacuum pumps.Measurement of performance characteristics.Part 2:Measurement of ultimate pressure

Professional Standard - Agriculture, Negative electrode capacity

GB/T 14147-1993 Allowable Limits of Dissolution of Lead and Cadmium in Ceramic Packaging Containers

Association Francaise de Normalisation, Negative electrode capacity

NF C74-114:1992 Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis.
NF E58-057:2008 Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume.
NF EN 60444-11:2011 Mesure des paramètres des résonateurs à quartz - Partie 11 : méthode normalisée pour la détermination de la fréquence de résonance à la charge fL et de la capacité de charge efficace CLeff utilisant des analyseurs automatiques de réseaux et ...
NF C86-816:1981 Harmonised system of quality assessment for electronic components. Blank detail specification : variable capacitance diodes.
NF EN 2349-312:2007 Série aérospatiale - Exigences et méthodes d'essais des relais et contacteurs - Partie 312 : pouvoir de commutation - Charges combinées
NF A36-210:1988 Produits sidérurgiques - Tôles pour chaudières et appareils à pression - Aciers alliés traités à haute limite d'élasticité - Nuances et qualité.
NF C93-621-11*NF EN 60444-11:2011 Measurement of quartz crystal unit parameters - Part 11 : standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction.
NF J81-031:2011 Missions, quality of service and competencies of the organisations in charge of vessel and floating structure inspections acting within the scope of the navigation certificate issuing process.
NF C83-156:1982 Harmonized system of quality assessment for electronic components. Sectional specification. Fixed capacitors with metallized electrodes and polypropylene dielectric.

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Negative electrode capacity

GB/T 33827-2017 Determination of magnetic impurities in anode nanomaterials for Li-ion battery
GB/T 22319.11-2018 Measurement of quartz crystal unit parameters—Part 11:Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction

British Standards Institution (BSI), Negative electrode capacity

BS EN 846-10:2000 Methods of test for ancillary components for masonry - Determination of load capacity and load deflection characteristics of brackets
BS EN 846-8:2000 Methods of test for ancillary components for masonry - Determination of load capacity and load-deflection characteristics of joist hangers
BS EN 846-4:2002 Methods of test for ancillary components for masonry - Determination of load capacity and load-deflection characteristics of straps
BS EN 846-5:2012 Methods of test for ancillary components for masonry. Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
BS EN 846-6:2012 Methods of test for ancillary components for masonry. Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
BS 6861-1:1987 Mechanical vibration - Balance quality requirements of rigid rotors - Method for determination of permissible residual unbalance
BS EN 846-3:2000 Methods of test for ancillary components for masonry - Determination of shear load capacity of welds in prefabricated bed joint reinforcement
BS EN 60444-11:2010 Measurement of quartz crystal unit parameters. Standard method for the determination of the load resonance frequency L and the effective load capacitance CLeff using automatic network analyzer techniques and error correction
BS EN 846-7:2000 Methods of test for ancillary components for masonry - Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connection)
BS EN 846-7:2012 Methods of test for ancillary components for masonry. Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
BS 1728-18:1970 Methods for the analysis of aluminium and aluminium alloys - Determination of zinc (ion-exchange-volumetric EDTA or polarographic method)
BS EN 3773-001:1999 Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 In/1000 A max - Technical specification
BS EN 131200:2002 Harmonized system of quality assessment for electronic components - Sectional Specification - Fixed capacitors with metallized electrodes and polypropylene dielectric

中国气象局, Negative electrode capacity

QX/T 475-2019 Technical requirements for air negative ion automatic measuring instrument capacitive inhalation method

Korean Agency for Technology and Standards (KATS), Negative electrode capacity

KS B 6314-1-2002(2022) Positive-displacement oil-sealed rotary vacuum pumps－Measurement of ultimate pressure
KS B 2059-2009 Hydrodynamic oilless plain bearing-Air foil bearing-Evaluation of static load capacity
KS B ISO 1607-2:2004 Positive-displacement vacuum pumps-Measurement of performance characteristics- Part 2:Measurement of ultimate pressure
KS B ISO 1607-2:2013 Positive-displacement vacuum pumps－Measurement of performance characteristics－ Part 2：Measurement of ultimate pressure
KS B ISO 10300-1:2004 Calculation of load capacity of bevel gears－Part 1：Introduction and general influence factors
KS B ISO 1607-2-2004(2009) Positive-displacement vacuum pumps－Measurement of performance characteristics－ Part 2：Measurement of ultimate pressure
KS B ISO 10300-2:2004 Calculation of load capacity of belvel gears－Part 2：Calculation of surface durability(pitting)
KS F 2339-2007 Testing method for nonrepetitive static plate load tests of soils and flexible pavement components for use in evaluation and design of airport and highway pavements
KS F 2338-2007 Testing method for repetitive static plate load tests of soils and flexible pavement components, for use in evaluation and design of airport and highway pavements
KS F 2339-1982 Testing method for nonrepetitive static plate load tests of soils and flexible pavement components for use in evaluation and design of airport and highway pavements
KS F 2338-1982 Testing method for repetitive static plate load tests of soils and flexible pavement components, for use in evaluation and design of airport and highway pavements
KS C IEC 61000-3-6:2004 Electromagnetic compatibility(EMC)-Part 3:Limits-Section 6:Assessment of emission limits for distorting loads in MV and HV power systems-Basic EMC publication
KS C IEC 61000-3-7:2003 Electromagnetic compatibility(EMC)-Part 3:Limits-Section 7:Assessment of emission limits for fluctuating loads in MV and HV power systems
KS C IEC 61000-3-6:2014 Electromagnetic compatibility(EMC) — Part 3: Limits — Section 6: Assessment of emission limits for distorting loads in MV and HV power systems — Basic EMC publication
KS B ISO 3164:2004 Earth-moving machinery-Laboratory evaluations of protective structures-Specifications for deflection-limiting volume
KS B ISO 3164:2014 Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume
KS C IEC 60444-11:2016 Measurement of quartz crystal unit parameters - Part 11: Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction
KS C IEC 60444-1:2016 Measurement of quartz crystal unit parameters - Part 11: Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction
KS C IEC 60444-1-2016(2021) Measurement of quartz crystal unit parameters - Part 11: Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analy
KS C IEC 60444-11-2016(2021) Measurement of quartz crystal unit parameters - Part 11: Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analy

IECQ - IEC: Quality Assessment System for Electronic Components, Negative electrode capacity

QC 300202/US 0005-1985 Specifications for Use in Electronic Equipment: Detail Specification: Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode; Silver Case@ Axial Lead@ Elastomeric Seal@ Polarized@ Nickel Positive@ Copper Negative Leads Insulated

ES-UNE, Negative electrode capacity

UNE-HD 148S2:1977 METHODS FOR THE MEASUREMENT OF DIRECT INTERELECTRODE CAPACITANCES OF ELECTRONIC TUBES AND VALVES. (Endorsed by AENOR in December of 1995.)
UNE-EN 60444-11:2010 Measurement of quartz crystal unit parameters -- Part 11: Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction (Endorsed by AE...

International Organization for Standardization (ISO), Negative electrode capacity

ISO 1607-2:1989 Positive-displacement vacuum pumps; measurement of performance characteristics; part 2: measurement of ultimate pressure
ISO 1607-2:1978 Positive displacement vacuum pumps — Measurement of performance characteristics — Part 2: Measurement of ultimate pressure
ISO 3164:1992 Earth-moving machinery; laboratory evaluations of roll-over and falling-object protective structures; specifications for deflection-limiting volume
ISO 13740:1998 Crude petroleum and petroleum products - Transfer accountability - Assessment of vessel experience factor on loading (VEFL) and vessel experience factor on discharging (VEFD) on ocean-going tanker vessels

Professional Standard - Aviation, Negative electrode capacity

HB/Z 338.2-1999 Aluminum alloy insulating anodic oxidation solution analysis method EDTA volumetric method for determination of aluminum content

HU-MSZT, Negative electrode capacity

MSZ 10906/4.lap-1963

工业和信息化部, Negative electrode capacity

YS/T 1509.1-2021 Methods for chemical analysis of silicon-carbon composite anode materials Part 1: Determination of silicon content by gravimetric and spectrophotometric methods
YS/T 1509.2-2021 Chemical analysis method of silicon-carbon composite anode materials Part 2: Determination of carbon content High-frequency heating infrared absorption method
YS/T 1509.3-2021 Chemical analysis method of silicon-carbon composite anode materials Part 3: Determination of iron, nickel, zirconium, calcium, lead, aluminum and hafnium content? Inductively coupled plasma atomic emission spectrometry

Professional Standard - Electron, Negative electrode capacity

SJ/T 2658.4-2015 Measuring method for semiconductor infrared-emitting diode.Part 4: Total capacitance

RO-ASRO, Negative electrode capacity

STAS 11617-1990 Building machines and equipmentsMETHODS FOR MEASUREMENT OF NOISE LEVEL AND PERMISSIBLE LIMITS
STAS 12123/4-1984 Semiconductor devices VARIABLE-CAPACITANCE DIODES Measuring methodes for electrical characteristics

ETSI - European Telecommunications Standards Institute, Negative electrode capacity

TR 101 589-2013 Broadband Radio Access Networks (BRAN); Very high capacity density BWA networks; Protocols (V1.1.1)
TR 101 534-2012 Broadband Radio Access Networks (BRAN); Very high capacity density BWA networks; System architecture@ economic model and derivation of technical requirements (V1.1.1)

Institute of Electrical and Electronics Engineers (IEEE), Negative electrode capacity

IEEE No 318-1971 IEEE Trial Use Standard Guide on Solid State Devices: Varactor Measurements Part 1- Small Signal Measurements
IEEE 318-1971 IEEE Trial Use Standard Guide on Solid State Devices: Varactor Measurements Part 1- Small Signal Measurements
IEEE 351-1972 IEEE Trial Use Standard Guide on Solid State Devices: Varactor Measurements Part II - Characterization of Large-Signal Devices
IEEE Std 351-1972 IEEE Trial Use Standard Guide on Solid State Devices: Varactor Measurements Part II - Characterization of Large-Signal Devices

European Committee for Standardization (CEN), Negative electrode capacity

EN 846-6:2012 Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
EN ISO 3164:1999 Earth-Moving Machinery - Laboratory Evaluations of Protective Structures - Specifications for Deflection-Limiting Volume ISO 3164: 1995; Supersedes EN 23164: 1985

IN-BIS, Negative electrode capacity

IS 6849 Pt.2-1993 Positive displacement vacuum pumps. Measurement of performance characteristics. Part 2: Measurement of ultimate pressure (First Revision)
IS 4400 Pt.9/Sec.1-1974
IS 4400 Pt.9/Sec.2-1974

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Negative electrode capacity

ASHRAE 3958-1996 Model to Predict the Latent Capacity of Air Conditioners and Heat Pumps at Part-Load Conditions with Constant Fan Operation

AASHTO - American Association of State Highway and Transportation Officials, Negative electrode capacity

VLVLR ERTA 1-2002 Guidelines for Geometric Design of Very Low-Volume Local Roads (ADT Less Than or Equal to 400) (Revision 1)
VLVLR-2001 Guidelines for Geometric Design of Very Low-Volume Local Roads (ADT Less Than or Equal to 400) (Revision 1)

U.S. Air Force, Negative electrode capacity

AIR FORCE MIL-PRF-83830 A-2004 TRUCK, FORKLIFT, ROUGH TERRAIN, DIESEL ENGINE DRIVEN, 25,000 POUND CAPACITY AT A 48 INCH LOAD CENTER
AIR FORCE A-A-59141 A VALID NOTICE 1-2012 Truck, Lift, Fork, Electric, Solid-Tired, 2,000 Pounds Capacity At 24 Inch Load Center, 144 Inch Lift Height
AIR FORCE A-A-58082 NOTICE 1-2013 TRUCK, LIFT, FORK, DIESEL-ENGINE-DRIVEN, PNEUMATIC-TIRED, 8,000 POUNDS CAPACITY AT 24 INCH LOAD CENTER
AIR FORCE A-A-59727-2002 TRUCK, LIFT, FORK, DIESEL-ENGINE-DRIVEN, PNEUMATIC-TIRED, 20,000 POUND CAPACITY AT 24 INCH LOAD CENTER
AIR FORCE A-A-59424-1999 TRUCK, LIFT, FORK, CONTAINER HANDLER, DIESEL ENGINE-DRIVEN, PNEUMATIC-TIRED, 55000 POUND CAPACITY AT 48 INCH LOAD CENTER
AIR FORCE A-A-58083 A VALID NOTICE 1-2012 Truck, Lift, Fork, Diesel-Engine-Driven, Pneumatic-Tired, 4- Wheel Drive, Rough Terrain, 6,000 Pounds Capacity at 24 Inch Load Center

未注明发布机构, Negative electrode capacity

BS EN 150006:1993(1999) Specification for Harmonized system of quality assessment for electronic components — Blank detail specification — Variable capacitance diode (s)

Lithuanian Standards Office , Negative electrode capacity

LST 1730-2001 Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves [HD 148 S2:1977 (IEC 60100:1962+A1:1969)]
LST EN 60444-11-2011 Measurement of quartz crystal unit parameters -- Part 11: Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction (IEC 60444-11:2010

AT-ON, Negative electrode capacity

ONORM E 6022-1990 Low-voltage high-rupturing-capacity fuses; three-pole fuse base racks for L. V.H.R.C.-fuses up to 660 V for busbar mounting

Defense Logistics Agency, Negative electrode capacity

DLA SMD-5962-89950 REV A-2006 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, DUAL NEGATIVE EDGE TRIGGERED JK FLIPFLOP WITH ASYNCHRONOUS SET AND CLEAR, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON

KR-KS, Negative electrode capacity

KS C IEC 60444-11-2016 Measurement of quartz crystal unit parameters - Part 11: Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analy
KS C IEC 60444-1-2016 Measurement of quartz crystal unit parameters - Part 11: Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analy

TZ-TBS, Negative electrode capacity

TZS 171-1983 Tanzania Standard ISO General purpose metric screw threads — Tolerances: Limits of sizes for commercial bolt and nut threads — Medium quality