ZH
RU
ES
iso-connector
iso-connector, Total:103 items.
In the international standard classification, iso-connector involves: Dentistry, Internal combustion engines for road vehicles, Pipeline components and pipelines, Fluid power systems, Welding, brazing and soldering, Technical drawings, Continuous handling equipment, Valves, Equipment for petroleum and natural gas industries, Analytical chemistry, Screw threads, Cycles, Vocabularies, Hinges, eyelets and other articulated joints, Commercial vehicles.
Association Francaise de Normalisation, iso-connector
- NF E29-579:2019 Fittings with rounded thread - ISO PN 16
- NF L40-104:1973 Connectors, axial sealing. Male thread fittings, ISO metric thread profile and tolerances.
- NF L43-587:1973 Rubber hose connections. ISO metric thread profile and tolerances.
- NF E29-579:1987 Piping. Fittings with rounded thread. ISO PN 16 and ISO PN 25.
- NF L40-103:1974 Connectors, axial sealing. Male thread fittings, ISO metric thread profile and B.N.A.E. Tolerances.
- NF L40-112:1987 Aerospace fitting joint assembly, radial sealing. Male thread fittings. ISO metric thread profile and tolerances. Dimensions.
- NF L44-512:1973 Aircraft ground supply. Low pressure connection. ISO metric thread profile and B.N.A.E. Tolerances (rech.)
- NF L40-105:1973 Connectors, axial sealing. Internal thread bosses, ISO metric thread profile and tolerances.
- AC T81-110:2012 Transport et manutention de gaz liquéfiés ou dissous - Raccord rapide système WECO - PAS ISO
- NF E48-079-3*NF ISO 12151-3:2022 Connections for hydraulic fluid power and general use - Hose fittings - Part 3 : hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
- NF ISO 12151-3:2022 Raccordements pour transmissions hydrauliques et applications générales - Raccords de flexible - Partie 3 : raccords de flexible avec brides conformes à l'ISO 6162-1 ou à l'ISO 6162-2
European Committee for Standardization (CEN), iso-connector
- EN ISO 11144:1996 Dental Equipment - Connections for Supply and Waste Lines ISO 11144:1995
- EN ISO 12617:2017 Road vehicles - Liquefied natural gas (LNG) refuelling connector - 3@1 MPa connector
- EN ISO 18279:2003 Brazing - Imperfections in brazed joints ISO 18279:2003
- EN ISO 10692-1:2001 Gas Cylinders - Gas Cylinder Valve Connections for Use in the Microelectronics Industry - Part 1: Outlet Connections ISO 10692-1: 2001
- EN ISO 15236-4:2004 Steel cord conveyor belts - Part 4: Vulcanized belt joints
- prEN ISO 18279 Brazing - Imperfections in brazed joints (ISO/DIS 18279:2022)
- EN 28430-3:1992 Resistance Spot Welding - Electrode Holders - Part 2: Morse Taper Fixing
- EN ISO 4797:2015 Laboratory glassware - Boiling flasks with conical ground joints (ISO 4797:2015)
- EN 25183-2:1991 Resistance spot welding; electrode adaptors, male taper 1:10; part 2: parallel shank fixing for end-thrust electrodes (ISO 5183-2:1988)
- prEN ISO 15614-8 rev Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016)
- EN ISO 3964:2016 Dentistry - Coupling dimensions for handpiece connectors
- EN 23964:1989/AC1:1990 Dentistry - Dental handpieces - Coupling dimensions (ISO 3964:1982); Corrigendum 1
- EN ISO 5183-1:2000 Resistance Welding Equipment - Electrode Adaptors, Male Taper 1:10 - Part 1: Conical Fixing, Taper 1:10 Supersedes EN 25183-1:1991; ISO 5183-1:1998
- EN ISO 15614-8:2016 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints
- prEN ISO 1089:2021 Resistance welding equipment - Electrode taper fits for spot welding equipment - Dimensions (ISO/DIS 1089:2021)
- FprEN ISO 1089 Resistance welding equipment - Electrode taper fits for spot welding equipment - Dimensions (ISO/FDIS 1089:2023)
- EN ISO 17659:2004 Welding - Multilingual terms for welded joints with illustrations (ISO 17659:2002)
- EN ISO 5183-2:2001 Resistance Spot Welding - Electrode Adaptors, Male Taper 1:10 - Part 2: Parallel Shank Fixing for End-Thrust Electrodes ISO 5183-2:2000; Supersedes EN 25183-2:1991
Danish Standards Foundation, iso-connector
Lithuanian Standards Office , iso-connector
- LST EN ISO 10806:2004 Pipework - Fittings for corrugated metal hoses (ISO 10806:2003)
- LST EN ISO 17660-1:2006 Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006)
- LST EN ISO 17660-2:2006 Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO 17660-2:2006)
- LST EN ISO 9168:2009 Dentistry - Hose connectors for air driven dental handpieces (ISO 9168:2009)
- LST EN ISO 18279:2004 Brazing - Imperfections in brazed joints (ISO 18279:2003)
- LST EN ISO 15236-4:2004 Steel cord conveyor belts - Part 4: Vulcanized belt joints (ISO 15236-4:2004)
- LST EN 21089-2000 Electrode taper fits for spot welding equipment - Dimensions (ISO 1089:1980)
- LST EN ISO 16070:2006 Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005)
- LST EN ISO 17637:2011 Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2003)
- LST EN ISO 13625:2003 Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002)
- LST EN ISO 15614-8:2003 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002)
- LST EN ISO 17659:2004 Welding - Multilingual terms for welded joints with illustrations (ISO 17659:2002)
German Institute for Standardization, iso-connector
- DIN ISO 12151-3:2012 Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2010)
- DIN EN ISO 17660-1 Berichtigung 1:2007 Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006); German version EN ISO 17660-1:2006, Corrigenda to DIN EN ISO 17660-1:2006-12
- DIN EN ISO 17660-2 Berichtigung 1:2007 Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO 17660-2:2006); German version EN ISO 17660-2:2006, Corrigenda to DIN EN ISO 17660-2:2006-12
- DIN EN ISO 2553:2019 Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2019)
- DIN EN ISO 5829:2021 Resistance spot welding - Electrode adaptors, female taper 1:10 (ISO 5829:1984); German version EN ISO 5829:2021
- DIN EN ISO 2553:2014 Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2013); German version EN ISO 2553:2013
- DIN ISO 12151-2:2023-11 Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 24° cone connector ends with O-rings (ISO 12151-2:2022); Text in German and English / Note: Date of issue 2023-09-29*Intended as replacement ...
- DIN ISO 15171-2:2017 Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Coupling with M16 x 2 end for connection under pressure (ISO 15171-2:2016)
- DIN ISO 12151-3:2012-08 Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2010) / Note: To be replaced by DIN ISO 12151-3 (2022-12).
- DIN ISO 12151-3:2022-12 Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2021); Text in German and English / Note: Date of issue 2022-11-18*Intended as replacement for DIN ISO ...
- DIN EN ISO 1089:2021 Resistance welding equipment - Electrode taper fits for spot welding equipment - Dimensions (ISO/DIS 1089:2021); German and English version prEN ISO 1089:2021
- DIN EN ISO 8434-1:2008 Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007); German version EN ISO 8434-1:2007
- DIN ISO 6696:2016 Cycles - Screw threads used in bottom bracket assemblies (ISO 6696:1989)
- DIN 3944:2002 Non-soldered compression fittings - L-adaptors with 24° cone connectors and O-ring - Adjustable, for design and type of compression end according to DIN EN ISO 8434-1
- DIN 3946:2002 Non-soldered compression fittings - Straight reducing swivel adaptors with 24° cone connectors with O-ring - For design and type of compression end according to DIN EN ISO 8434-1
- DIN 3945:2002 Non-soldered compression fittings - Straight stud swivel adaptor with 24° cone connectors with O-ring - For design and type of compression end according to DIN EN ISO 8434-1
- DIN EN ISO 5183-2:2002 Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183-2:2000); German version EN ISO 5183-2:2002
- DIN EN ISO 2553:2012 Welding and allied processes - Symbolic representation on drawings - Welded, brazed and soldered joints (ISO/DIS 2553:2012); German version prEN ISO 2553:2012
- DIN ISO 7803:1995 Commercial road vehicles - Steering ball joints; identical with ISO 7803:1987
- DIN EN ISO 18785-2:2021 Friction stir spot welding - Aluminium - Part 2: Design of weld joints (ISO 18785-2:2018); German version EN ISO 18785-2:2021
- DIN EN ISO 27509:2013 Petroleum and natural gas industries - Compact flanged connections with IX seal ring (ISO 27509:2012); English version EN ISO 27509:2012, only on CD-ROM
- DIN EN ISO 17637:2017 Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016)
AENOR, iso-connector
Association of German Mechanical Engineers, iso-connector
- DVS 0703-2008 Limits for imperfections of fusion-welded joints according to DIN EN ISO 5817
British Standards Institution (BSI), iso-connector
- 22/30438204 DC BS EN ISO 18279. Brazing. Imperfections in brazed joints
- BS ISO 12151-3:2010 Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
- BS ISO 12151-3:2021 Tracked Changes. Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
- BS ISO 12151-2:2003 Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-1 and ISO 8434-4 24 ° cone connector ends with O-rings
- BS ISO 12151-2:2022 Tracked Changes. Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 8434-1 24° cone connector ends with O-rings
- BS ISO 12151-1:2010 Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-3 O-ring face seal ends
- 20/30408153 DC BS ISO 12151-3. Connections for hydraulic fluid power and general use. Hose fittings. Part 3. Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
- BS ISO 12151-1:2010+A1:2017 Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 8434-3 O-ring face seal ends
PL-PKN, iso-connector
- PN-EN ISO 2553-2019-06 D Welding and allied processes -- Symbolic representation on drawings -- Welded joints (ISO 2553:2019)
SE-SIS, iso-connector
- SIS SS 1257-1991 Fittings for piping — Intemally threaded long connections with pipe threads ISO 228- 1-G
- SIS SS 1259-1991 Fittings forpiping — Internally threaded short connections with pipe threads ISO 228-1-G
- SIS SMS 1257-1969 Fittings tor piping. Internally threaded connectionx According to ISO/R 7
- SIS SMS 1256-1969 Fittings for piping. Externally threaded connections. According to ISO/R 7
- SIS SS 1258-1991 Fittings for piping — Externally threaded short connections with pipe threads ISO 228- 1-G- or ISO 7- 1-R
BE-NBN, iso-connector
- NBN-EN 28430-2-1992 Resistance spot welding. Electrode holders. Part 2: Morse taper fixing (ISO 8430-2:1988)
- NBN-EN 28430-3-1992 Resistance spot welding. Electrode holders. Part 3: Parallel shank fixing for end thrust (ISO 8430-3:1988)
- NBN-EN 23964-1992 Dentistry. Dental handpieces. Coupling dimensions (ISO 3964:1982)
AT-ON, iso-connector
- ONORM EN 29168-1990 Dentistry; Dental handpieces; Hose connectors (ISO 9168:1988)
- OENORM EN ISO 1089:2021 Resistance welding equipment - Electrode taper fits for spot welding equipment - Dimensions (ISO/DIS 1089:2021)
Korean Agency for Technology and Standards (KATS), iso-connector
- KS B ISO 12151-2-2006(2021) Connections for hydraulic fluid power and general use -- Hose fittings -- Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
- KS B ISO 12151-3-2006(2011) Connections for hydraulic fluid power and general use－Hose fittings－Part 3：Hose fittings with KS B ISO 6162 flange ends
- KS B ISO 12151-3:2006 Connections for hydraulic fluid power and general use-Hose fittings-Part 3:Hose fittings with KS B ISO 6162 flange ends
- KS B ISO 12151-3:2013 Connections for hydraulic fluid power and general use-Hose fittings-Part 3:Hose fittings with KS B ISO 6162 flange ends
- KS B ISO 12151-2-2006(2016) Connections for hydraulic fluid power and general use -- Hose fittings -- Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
API - American Petroleum Institute, iso-connector
- API SPEC 14L-2002 Lock Mandrels and Landing Nipples (First Edition/ ISO 16070 Adoption)
International Organization for Standardization (ISO), iso-connector
- ISO 12151-3:2010 Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
- ISO 12151-3:2021 Connections for hydraulic fluid power and general use — Hose fittings — Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
- ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1
PT-IPQ, iso-connector
- NP EN ISO 8434-1:2000 Metallic tube connections for fluid power and general use Part 1:24° compression fittings(ISO 8434-4:1994)
NL-NEN, iso-connector
- NEN-ISO 6922:1993 Adhesives. Determination of tensile strength of butt joints (ISO 6922:1987)