ZH
RU
ES

Test Center Fees

Test Center Fees, Total:429 items.

In the international standard classification, Test Center Fees involves: Paint ingredients, Rubber and plastics products, Acoustics and acoustic measurements, Gears, Crude petroleum, Paints and varnishes, Applications of information technology, Fuels, Insulating fluids, Petroleum products in general, Lubricants, industrial oils and related products, Transport, Products of the textile industry, Products of the chemical industry, Analytical chemistry, Construction materials, Road engineering, Non-destructive testing, Organic chemicals, Metalliferous minerals, Water quality, Sports equipment and facilities, Wastes, Non-ferrous metals, Air quality, Semiconducting materials, Elements of buildings, Ceramics, Plastics, Materials and articles in contact with foodstuffs, Rubber, Soil quality. Pedology, Solar energy engineering, Insulation, Installations in buildings, Geology. Meteorology. Hydrology, Inorganic chemicals, Floor treatment appliances, Paper and board, Small craft, Vacuum technology, Kitchen equipment, Electronic components in general, Packaging materials and accessories, Coals, Company organization and management, Raw materials for rubber and plastics.

Institute of Electrical and Electronics Engineers (IEEE), Test Center Fees

IEEE Std 1450.6.2-2014 IEEE Standard for Memory Modeling in Core Test Language

AENOR, Test Center Fees

UNE 51216:1987 STANDARD TEST METHOD FOR WATER IN LIQUID PETROLEUM BY KARL FISCHER REAGENT
UNE 51082:1986 STANDARD TEST METHOD FOR WATER AND SEDIMENT IN FUEL-OILS BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE)
UNE-EN 61462:2008 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations.

American Society for Testing and Materials (ASTM), Test Center Fees

ASTM D1364-02(2007) Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
ASTM D1364-02 Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
ASTM D7336/D7336M-07 Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
ASTM E776-87(2004) Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
ASTM D4928-12(2018) Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D4017-22 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
ASTM D4007-11 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-11e1 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D2709-22 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM E778-87(2004) Standard Test Methods for Nitrogen in the Analysis Sample of Refuse-Derived Fuel
ASTM E778-87(1996) Standard Test Methods for Nitrogen in the Analysis Sample of Refuse-Derived Fuel
ASTM D4928-00(2005) Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D4928-00e1 Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D4928-00 Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D1533-12 Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
ASTM D1744-13 Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent
ASTM D3883-04(2016) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM D3237-22 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM D3883-04(2020) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM D4377-00(2006) Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
ASTM D1533-00 Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
ASTM D4017-96a Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
ASTM D4017-90 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
ASTM D1533-00(2005) Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
ASTM D4377-00e1 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
ASTM D4377-00 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
ASTM D4017-02 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
ASTM D4017-02(2008)e1 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
ASTM D4017-02(2015) Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
ASTM D4377-00(2011) Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
ASTM D1123-22 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D1533-20 Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
ASTM D5153-04 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
ASTM E1108-86(2009) Standard Test Method for Determination of the Recovery of a Product in a Materials Separation Device
ASTM D3831-22 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
ASTM D2709-16 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D1290-95 Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
ASTM D1290-95(2002) Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
ASTM D5546-94a Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
ASTM D5546-01 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
ASTM D1290-95(2008) Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
ASTM D5546-09 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
ASTM E2971-16(2020) Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements
ASTM D1123-99(2009) Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM E1064-04a Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM E1064-05 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM E1064-16 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D1585-96(2006) Standard Test Methods for Fatty Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products
ASTM D1585-96 Standard Test Methods for Fatty Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products
ASTM D3237-06 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM D3237-02 Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy
ASTM E507-09 Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry
ASTM D4382-18 Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace
ASTM D5056-17 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
ASTM D5056-22 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
ASTM D3831-12(2017) Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
ASTM D3237-12 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM F2398-04 Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
ASTM F2398-04e1 Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
ASTM C293-94 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C293-02 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM D4563-02 Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint
ASTM D4563-86(1996) Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint
ASTM E2971-14 Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements
ASTM E2971-16 Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements
ASTM E1064-00 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM E1064-08 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D3237-06e1 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM E1108-86(1996) Standard Test Method for Determination of the Recovery of a Product in a Materials Separation Device
ASTM E1834-96(2002) Standard Test Method for Determination of Lead in Nickel Alloys by Electrothermal Atomic Absorption Spectrometric Method
ASTM E1834-96 Standard Test Method for Determination of Lead in Nickel Alloys by Electrothermal Atomic Absorption Spectrometric Method
ASTM D5056-04(2010) Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
ASTM D4192-08 Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
ASTM D4192-03 Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
ASTM E1108-86(2017) Standard Test Method for Determination of the Recovery of a Product in a Materials Separation Device
ASTM D4007-81(1995)e1 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-02 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-02(2006) Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-08 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM F2398-11 Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
ASTM F2398-11(2015) Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
ASTM D4007-22 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-22 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-11(2016)e1 Standard test method for determination of water and sediment in crude oil by centrifugation (laboratory method)
ASTM E1898-07 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry
ASTM D4185-17 Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
ASTM D4834-03(2021) Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
ASTM D4563-02(2008) Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint
ASTM D4563-02(2022) Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint
ASTM F2398-11(2020) Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
ASTM E1064-04 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D8063-18 Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration
ASTM D5056-04 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
ASTM D5056-96 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
ASTM D3684-01 Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method
ASTM D3684-94(2000) Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method
ASTM E1600-07 Standard Test Method for Determination of Gold in Cyanide Solutions by Atomic Absorption Spectrometry
ASTM D5056-02 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
ASTM D3718-85a(1999) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(1999) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3624-85a(1999) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3684-01(2006) Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method
ASTM D5153-10 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
ASTM F1188-00 Standard Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption
ASTM E507-21 Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry
ASTM E1898-21 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry
ASTM E507-13 Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry
ASTM E1898-13 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry
ASTM D3624-85a(2022) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(2022) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM C1763-16 Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
ASTM D3718-85A(2022)e1 Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D3237-17 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM D3624-85a(2015) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(2015) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3718-85a(2015) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D5153-10(2016) Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
ASTM D5056-15 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
ASTM D1796-04 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-97 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-97e1 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-83(1990)e1 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-97(2002) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM C1667-09 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
ASTM F2398-10 Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
ASTM D1796-11 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM C1667-07 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
ASTM C1667-15 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
ASTM D4563-02(2015) Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint
ASTM C1466-00(2007) Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware
ASTM C1466-00(2020) Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted From Ceramic Foodware
ASTM C1466-00(2016) Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware
ASTM D7923-17a Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
ASTM D6304-07e1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
ASTM D6304-20 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
ASTM D6304-16e1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
ASTM D3831-98 Standard Test Method for Manganese In Gasoline By Atomic Absorption Spectroscopy
ASTM D3831-01 Standard Test Method for Manganese In Gasoline By Atomic Absorption Spectroscopy
ASTM D4834-03 Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
ASTM D3831-01(2006) Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
ASTM D3683-04 Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption
ASTM D3683-11 Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption
ASTM D6732-04(2015) Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM D6732-04(2020) Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM D4606-21 Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
ASTM D3831-12 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
ASTM D2698-05 Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging
ASTM D1796-04(2009) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-11(2016) Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D3335-85a(2014) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
ASTM E1064-12 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D4606-95(2000) Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
ASTM D3624-85a(2005) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM E2050-99 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method
ASTM D5547-95(2003) Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption
ASTM E507-03 Standard Test Method for Aluminum in Iron Ores by Atomic Absorption Spectrometry
ASTM D3718-85a(2005) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM E2050-99(2004) Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method
ASTM D5547-95 Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption
ASTM D3335-85a(2005) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
ASTM E1600-02 Standard Test Method for Determination of Gold in Cyanide Solutions by Atomic Absorption Spectrometry
ASTM E1600-96 Standard Test Method for Determination of Gold in Cyanide Solutions by Atomic Absorption Spectrometry
ASTM D3717-85a(2005) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D4834-03(2008) Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
ASTM D3335-85a(2009) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
ASTM D5547-95(2009) Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption
ASTM D3624-85a(2010) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(2010) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3718-85a(2010) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D3683-94(2000) Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption
ASTM E508-21 Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry
ASTM E2050-12 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Spectrometry
ASTM E1600-13 Standard Test Method for Determination of Gold in Cyanide Solutions by Flame Atomic Absorption Spectrometry
ASTM F1308-98(2018) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
ASTM D5153-22 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption Spectrophotometry
ASTM E1600-15 Standard Test Methods for Determination of Gold in Cyanide Solutions
ASTM D3635-13(2021) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
ASTM D4834-03(2014) Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
ASTM D4606-15 Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
ASTM D1796-11(2016) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D7923-17 Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
ASTM D7923-17ae1 Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
ASTM D7923-19 Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
ASTM D7923-16 Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
ASTM D4606-03(2007) Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
ASTM D4004-93(2002) Standard Test Methods for Rubber8212;Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis
ASTM E1898-97 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry
ASTM E1898-02 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry
ASTM D4606-03 Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
ASTM E1834-09 Standard Test Method for Determination of Lead in Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
ASTM D4004-93(1998) Standard Test Methods for Rubber-Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis
ASTM D5954-22 Standard Test Method for Mercury Sampling and Measurement in Gaseous Fuels by Atomic Absorption Spectroscopy
ASTM E841-12 Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Atomic Absorption Spectrometry
ASTM D4004-06(2021) Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis
ASTM D6129-97(2021) Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
ASTM D5954-22a Standard Test Method for Mercury Sampling and Measurement in Gaseous Fuels by Atomic Absorption Spectroscopy
ASTM E1195-01(2008) Standard Test Method for Determining a Sorption Constant (K_oc) for an Organic Chemical in Soil and Sediments
ASTM D6129-97(2015) Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
ASTM D1240-02 Standard Test Methods for Rosin Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products
ASTM D1240-02(2006) Standard Test Methods for Rosin Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products
ASTM F1284-04 Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems
ASTM E2236-10(2019) Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules
ASTM D1796-11e1 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D3335-85a(1999) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
ASTM D3335-85a(2020) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
ASTM D5156-02(2016) Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
ASTM F1284-99 Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems
ASTM D5954-98(2006) Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
ASTM E508-03 Standard Test Method for Calcium and Magnesium in Iron Ores by Atomic Absorption Spectrometry
ASTM D6586-00 Standard Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests
ASTM D6732-02 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM E711-87(1996) Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
ASTM D6071-96(2000) Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM D6732-01 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM D5954-98 Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
ASTM E508-09 Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry
ASTM D6071-96 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM E508-13 Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry
ASTM D6732-04 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM D8207-18 Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PAT) by Atomic Absorption (AA) Spectrometry
ASTM E711-87(2004) Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
ASTM D7995-19 Standard Test Method for Total Water in Liquid Butane by Liquefied Gas Sampler and Coulometric Karl Fischer Titration
ASTM E1852-96(2001) Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Electrothermal Atomic Absorption Spectrometry
ASTM D1704/D1704M-95e1 Standard Test Method for Determining the Amount of Particulate Matter in the Atmosphere by Measurement of the Light Absorbance of a Filter Sample
ASTM E1852-19 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry
ASTM D6527-00 Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation
ASTM D6527-00(2008) Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation
ASTM D4517-04 Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
ASTM E841-04 Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Atomic Absorption Spectroscopy
ASTM F888-04 Standard Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner
ASTM F888-06 Standard Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner
ASTM E841-99 Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Atomic Absorption Spectroscopy
ASTM E1938-08 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometry
ASTM D7623-20 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
ASTM D6071-14(2022) Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM D3635-13 Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
ASTM D7623-10(2015) Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
ASTM D686-93 Standard Test Methods of Qualitative Examination of Mineral Filler and Mineral Coating of Paper
ASTM D6304-07 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
ASTM D6869-17 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
ASTM E1938-97 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometric Method
ASTM E1938-02 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometric Method
ASTM D6785-20 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM D4517-04(2009) Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
ASTM D6304-03 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D6304-16 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
ASTM D3635-01(2005) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
ASTM D3635-01 Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
ASTM D3635-90(1998) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
ASTM E841-12a Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Flame Atomic Absorption Spectrometry
ASTM D5156-22 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
ASTM D1319-15 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D4185-23 Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
ASTM F3052-14 Standard Guide for Conducting Small Boat Stability Test 40;Deadweight Survey and Air Inclining Experiment41; to Determine Lightcraft Weight and Centers of Gravity of a Small Craft
ASTM D6304-00 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D6869-03 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
ASTM D4834-88(1998) Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
ASTM E1852-08 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry
ASTM E3193-20 Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS)
ASTM E3193-19 Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS)
ASTM D6732-04(2010) Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM D5863-22 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM D5086-20 Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
ASTM D6071-14 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM D5086-01(2013) Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
ASTM D6071-06 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM D6071-13 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM E1852-96e1 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Electrothermal Atomic Absorption Spectrometry
ASTM F3308/F3308M-18 Standard Practice for Sampling and Testing Frequency for Recycled Materials in Polyethylene (PE) Pipe for Non-Pressure Applications
ASTM D4517-85(1999) Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
ASTM D5156-02 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
ASTM E1195-87(1993)e1 Standard Test Method for Determining a Sorption Constant (Koc) for an Organic Chemical in Soil and Sediments
ASTM C1466-00 Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware
ASTM F3308/F3308M-19 Standard Practice for Sampling and Testing Frequency for Recycled Materials in Polyethylene (PE) Pipe for Non-Pressure Applications
ASTM E1852-13 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry
ASTM D6785-08 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM D4517-15(2023) Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
ASTM D2668-07(2021) Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di
ASTM C1466-00(2012) Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware
ASTM D7622-20 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM D8478-23 Standard Test Method for N-Hexane Recoverable Total Oil and Grease and Total Petroleum Hydrocarbons in Water by ATR-Infrared Determination
ASTM D7622-10(2015) Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM E595-93(2003)e1 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
ASTM D3605-00 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
ASTM D6785-02 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM E595-93(2003)e2 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
ASTM E595-15(2021) Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
ASTM D3561-16(2021)e1 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM D3605-22 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
ASTM D3605-17 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
ASTM D3605-16 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
ASTM D5863-00a(2016) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM F1500-98(2019) Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
ASTM E1917-02 Standard Test Method for Determination of Phosphorous in Nickel, Ferronickel, and Nickel Alloys by the Phosphovanadomolybdate Molecular Absorption Spectrometric Method
ASTM E1917-97 Standard Test Method for Determination of Phosphorous in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Molecular Absorption Spectrometric Method
ASTM E668-10 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
ASTM D5814-02 Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
ASTM E668-20 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
ASTM D6785-13 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM D5814-18 Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
ASTM E668-13 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
ASTM D5863-00 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM D5863-00a Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM D5863-00a(2005) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM D6414-99 Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption
ASTM D5863-00a(2011) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM E668-00 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
ASTM E668-05 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
ASTM E2163-06 Standard Guide for Minimum Training Requirements for Examiners Conducting Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders in Treatment, Probation or Other Similar Programs
ASTM E595-93(1999) Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
ASTM D3561-02(2007)e1 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM D3561-96 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM D3561-02 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM D3266-91(2000)e1 Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
ASTM D3605-00(2011) Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
ASTM D2668-96 Standard Test Method for 2,6-Ditertiary-Butyl Para Cresol and 2,6-Ditertiary-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
ASTM E3193-21 Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS)
ASTM D6414-14 Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption
ASTM D3267-20 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
ASTM E595-07 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
ASTM D3266-91(2018) Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
ASTM D3267-12 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
ASTM D5016-16 Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption
ASTM D4856-11(2016) Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)
ASTM D8519-23 Standard Test Method for Determination of Hydrocarbon Types in Waste Plastic Process Oil Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
ASTM D2668-02e1 Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
ASTM D2668-02 Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
ASTM D5016-08e1 Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption
ASTM D6414-23 Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption
ASTM D8019-15 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets
ASTM D5086-01 Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
ASTM D5086-95 Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
ASTM D2668-07 Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
ASTM D7622-10e1 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM D5086-01(2008) Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
ASTM D4856-23 Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)
ASTM D5016-07 Standard Test Method for Sulfur in Ash from Coal, Coke, and Residues from Coal Combustion Using High-Temperature Tube Furnace Combustion Method with Infrared Absorption
ASTM D5016-07a Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption
ASTM D4358-84(1999) Standard Test Method for Lead and Chromium in Air Particulate Filter Samples of Lead Chromate Type Pigment Dusts by Atomic Absorption Spectroscopy
ASTM D4358-05 Standard Test Method for Lead and Chromium in Air Particulate Filter Samples of Lead Chromate Type Pigment Dusts by Atomic Absorption Spectroscopy
ASTM D2668-07(2013) Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
ASTM D5184-00 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D5184-12(2017) Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D5016-03 Standard Test Method for Sulfur in Ash from Coal, Coke, and Residues from Coal Combustion Using High-Temperature Tube Furnace Combustion Method with Infrared Absorption
ASTM F1500-98(2003) Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
ASTM F1500-98 Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
ASTM F1500-98(2008) Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
ASTM D3561-11 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM D4856-11 Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)
ASTM D2007-02 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay—Gel Absorption Chromatographic Method
ASTM F1500-98(2014) Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
ASTM D2007-19 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay—Gel Absorption Chromatographic Method
ASTM D3561-16 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM D8267-19 Standard Test Method for Determination of Saturated Hydrocarbon, Aromatic, and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Det
ASTM D8368-21 Standard Test Method for Determination of Totals of Saturate, Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
ASTM D8368-22 Standard Test Method for Determination of Totals of Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectr
ASTM D8368-22a Standard Test Method for Determination of Totals of Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectr
ASTM D8267-19a Standard Test Method for Determination of Total Aromatic, Monoaromatic and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detecti
ASTM D6209-98e1 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
ASTM D6209-98(2012) Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Anal
ASTM D6209-98(2004) Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
ASTM D6209-13 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Anal
ASTM D5184-22 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D6209-21 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Anal
ASTM C1301-95 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
ASTM C1301-22 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
ASTM C1301-95(2009)e1 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
ASTM D5184-12 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry

SE-SIS, Test Center Fees

SIS SS-ISO 3089:1992 Self-centring, manually operated chucks for machine tools — Normal accuracy — Acceptance test specifications (geometrical tests)

American National Standards Institute （ANSI), Test Center Fees

ASTM E1064-23 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration (Standard + Redline PDF Bundle)
BS ISO 7972:2023 Adhesives. Absorption of water into an adhesive layer using an open-faced specimen and determination of shear strength by secondary bonding (British Standard)

Association Francaise de Normalisation, Test Center Fees

NF E23-022-1*NF ISO 8579-1:2002 Acceptance code for gear units - Part 1 : test code for airborne sound.
NF EN 15876-1:2017 Perception du télépéage - Évaluation de conformité des équipements embarqués et des équipements d'infrastructures routières à l'EN 15509 - Partie 1 : structure de la suite d'essais et intentions d'essai
NF EN 61462:2008 Isolateurs composites creux - Isolateurs avec ou sans pression interne pour utilisation dans des appareillages électriques de tensions nominales supérieures à 1 000 V - Définitions, méthodes d'essais, critères d'acceptation et recommandations d...

International Organization for Standardization (ISO), Test Center Fees

ISO/TR 16401-1:2018 Electronic fee collection — Evaluation of equipment for conformity to ISO/TS 17575-2 — Part 1: Test suite structure and test purposes
ISO/TR 16401-2:2018 Electronic fee collection — Evaluation of equipment for conformity to ISO 17575-2 — Part 2: Abstract test suite
ISO 16407-2:2018 Electronic fee collection — Evaluation of equipment for conformity to ISO 17575-1 — Part 2: Abstract test suite
ISO 16410-2:2018 Electronic fee collection — Evaluation of equipment for conformity to ISO 17575-3 — Part 2: Abstract test suite
ISO/TS 13140-1:2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 - Part 1: Test suite structure and test purposes
ISO/TS 13143-1:2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 - Part 1: Test suite structure and test purposes

CEN - European Committee for Standardization, Test Center Fees

EN ISO 16407-2:2018 Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-1 - Part 2: Abstract test suite
EN ISO 16410-2:2018 Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-3 - Part 2: Abstract test suite

VE-FONDONORMA, Test Center Fees

British Standards Institution (BSI), Test Center Fees

BS EN ISO 13143-1:2016 Electronic fee collection. Evaluation of on-board and roadside equipment for conformity to ISO 12813. Test suite structure and test purposes
BS EN ISO 13143-1:2020 Electronic fee collection. Evaluation of on-board and roadside equipment for conformity to ISO 12813. Test suite structure and test purposes
BS DD CEN ISO/TS 13143-1:2011 Electronic fee collection. Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813. Test suite structure and test purposes
BS DD CEN ISO/TS 13140-1:2011 Electronic fee collection. Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141. Test suite structure and test purposes
21/30390469 DC BS EN IEC 62772. Composite hollow core station post insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V. Definitions, test methods and acceptance criteria

European Committee for Standardization (CEN), Test Center Fees

EN 15876-1:2016 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 1: Test suite structure and test purposes
CEN ISO/TS 13140-2:2012 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 - Part 2: Abstract test suite
EN ISO 13140-1:2016 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO 13141 - Part 1: Test suite structure and test purposes

API - American Petroleum Institute, Test Center Fees

API STD 2548-1968 STANDARD METHOD OF TEST FOR WATER AND SEDIMENT IN CRUDE OILS AND FUEL OILS BY CENTRIFUGE
API MPMS 10.9-1993 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 9 - Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
API MPMS 10.9-2013 Manual of Petroleum Measurement Standards Chapter 10.9 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration (Third Edition)
API MPMS 10.6-2013 Manual of Petroleum Measurement Standards Chapter 10.6 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) (FIFTH EDITION)
API MPMS 10.9-2002 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 9 - Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration (Second Edition)
API MPMS 10.3-2013 Manual of Petroleum Measurement Standards Chapter 10.3 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) (FOURTH EDITION)
API MPMS 10.7-2002 Manual of Petroleum Measurement Standards Chapter 10—Sediment and Water Section 7—Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration (Second Edition)
API MPMS 10.6-2002 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 6 - Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) (Third Edition)
API MPMS 10.6-2004 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 6 - Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) (Fourth Edition)
API MPMS 10.7-1991 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 7 - Standard Test Method for Water in Crude Oils by Karl Fischer Titration (Volumetric) (First Edition; ASTM D 4377; IP 356/87; (R 1996))
API MPMS 10.3-2003 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 3 - Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) (Second Edition)

AASHTO - American Association of State Highway and Transportation Officials, Test Center Fees

T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
T 177-2003 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
T170-2000 Standard Method of Test for Recovery of Asphalt from Solution by Abson Method (Twentieth Edition; ASTM D1856-95a)
TP2-1994 Standard Test Method for the Quantitative Extraction and Recovery of Asphalt Binder from Hot Mix Asphalt (HMA)
T177-1997 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading) (Twentieth Edition; ASTM C293-94)
TP2-2001 Standard Test Method for the Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures (2000 Edition; Interim Edition 4/2001)
T 177-1997 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading) (HM-22; Part IIA; ASTM Designation: C 293-94)

The American Road & Transportation Builders Association, Test Center Fees

AASHTO T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)

German Institute for Standardization, Test Center Fees

DIN EN 15876-1:2016 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 1: Test suite structure and test purposes
DIN EN 15876-2:2016 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 2: Abstract test suite
DIN EN 15876-1:2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 1: Test suite structure and test purposes; English version EN 15876-1:2010
DIN EN 15876-2:2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 2: Abstract test suite; English version EN 15876-2:2011
DIN EN 15876-1:2012 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 1: Test suite structure and test purposes; English version EN 15876-1:2010+A1:2012

Indonesia Standards, Test Center Fees

SNI 8069-2014 Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy

Korean Agency for Technology and Standards (KATS), Test Center Fees

KS M 5985-2008(2018) Standard test method for low concentrations of lead, cadmium and cobalt in paint by atomic absorption spectroscopy

International Electrotechnical Commission (IEC), Test Center Fees

IEC 62772:2016 Composite hollow core station post insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V - Definitions, test methods and acceptance criteria

ES-UNE, Test Center Fees

UNE 157751:2006 General criteria for the design of projects intended to centers of transformation and analogous facilities of receipt, maneuver and measure in high voltage, over to 1 kV and up to 66 kV included

International Telecommunication Union (ITU), Test Center Fees

ITU-T D.301 R FRENCH-1995 Determination of Accounting Rate Shares and Collection Charges in Telex Relations between Countries in Europe and the Mediterranean Basin - Recommendations for Regional Application - Standards Rates Applicable in the International Telecommunication Servic
ITU-T D.301 R SPANISH-1995 DETERMINATION OF ACCOUNTING RATE SHARES AND COLLECTION CHARGES IN TELEX RELATIONS BETWEEN COUNTRIES IN EUROPE AND THE MEDITERRANEAN BASIN

Professional Standard - Post and Telecommunication, Test Center Fees

YDN 071-1997 900/1800MHz TDMA digital cellular mobile communication network interface signaling test specification between mobile service switching center and base station subsystem Unit 2: Phase 2 test specification (internal standard)

Lithuanian Standards Office , Test Center Fees

LST EN 61462-2008 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations (IEC 61462:2007)