ZH
RU
ES

Electromagnetic flowmeter fluctuations

Electromagnetic flowmeter fluctuations, Total:305 items.

In the international standard classification, Electromagnetic flowmeter fluctuations involves: Metrology and measurement in general, Measurement of fluid flow, Aerospace electric equipment and systems, Quality, Electricity. Magnetism. Electrical and magnetic measurements, Linear and angular measurements, Rectifiers. Convertors. Stabilized power supply, Valves, Electromagnetic compatibility (EMC), Telecommunications in general, Environmental protection, Electromechanical components for electronic and telecommunications equipment, Conducting materials, IT terminal and other peripheral equipment, Audio, video and audiovisual engineering, Electrical wires and cables, Transformers. Reactors, Electric traction equipment, Surface treatment and coating, Installations in buildings, Road vehicle systems, Open systems interconnection (OSI), Lamps and related equipment, Internal combustion engines for road vehicles, Radiation measurements, Television and radio broadcasting.

RU-GOST R, Electromagnetic flowmeter fluctuations

GOST R 8.675-2009 State system for ensuring the uniformity of measurements. Electromagnetic flowmeter. Salibration methods
GOST 4.158-1985 System of product-quality indices. Volumetric, velocity counters, batchmeters and flowmeters. Electromagnetic flowmeters. Vortex flowmeters, batchmeters and metering plants. Nomenclature of indices
GOST 11013-1981 Moving-coil oscillograph galvanometers. General specifications
GOST R 52932-2008 Electromagnetic, ultrasonic, vortex and fluid oscillator counters for water heat supply systems. General specifications
GOST 8.320-1978 State system for ensuring the uniformity of measurements. Flowmeter electromagnetic industry. Methods and means for verification
GOST 28723-1990 Velocity electromagnetic and vortex flowmeters. General technical requirements and test methods
GOST IEC 61000-4-14-2016 Electromagnetic compatibility (EMC). Part 4-14. Testing and measurement techniques. Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
GOST IEC 61000-4-13-2016 Electromagnetic compatibility (EMC). Part 4-13. Testing and measurement techniques. Harmonics and interharmonics including mains signalling at a.c. power port. Low frequency immunity tests
GOST IEC 61000-4-29-2016 Electromagnetic compatibility (EMC). Part 4-29. Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
GOST 32793-2014 Current collection by electric rolling stock current collector. The nomenclature of current collection quality indicators and method of its calculation
GOST IEC 61000-4-34-2016 Electromagnetic compatibility (EMC). Part 4-34. Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
GOST R 51317.4.34-2007 Electromagnetic compatibility of technical equipment.Voltage dips, short interruptions and voltage variations immunity for equipment with input current more than 16 A per phase. Requirements and test methods
GOST 13661-1992 Electromagnetic compatibility of technical equipment. Passive filters and elements for interference suppression. Methods of inserted damping measuring
GOST R 50638-1994 Electromagnetic compatibility of technical equipment. Semicondactor microvawe oscillator devices and modules. List of EMC parameters and requirements for them. Methods of measurement
GOST R 51317.3.11-2006 Electromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 75 A and subject to conditional connection. Limits and test methods

Professional Standard - Machinery, Electromagnetic flowmeter fluctuations

JB/T 9248-2015 Electromagnetic flowmeter
JB/T 9248-1999 Electromagnetic flowmeters

Group Standards of the People's Republic of China, Electromagnetic flowmeter fluctuations

T/ZZB 0354-2018 Electromagnetic flowmeters
T/CAS ES380508007-2022 Rules for quality grading and evaluating of industrial products—Flow meter – Electromagnetic flowmeter
T/ZZB 2346-2021 Dual flow solenoid valves for motor vehicle fuel dispensers

Korean Agency for Technology and Standards (KATS), Electromagnetic flowmeter fluctuations

KS B 5260-1995 Electromagnetic flowmeters
KS B 5260-2009(2019) Electromagnetic flowmeters
KS B ISO TR 11974-2005(2015) Measurement of liquid flow in open channels－Electromagnetic current meters
KS B ISO 13359:2014 Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length
KS B ISO 13359:2004 Measurement of conductive liquid flow in closed conduits-Flanged electromagnetic flowmeters-Overall length
KS B ISO 13359-2014(2019) Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length
KS C IEC 61000-4-14-2010(2017) Electromagnetic compatibility(EMC)－Part 4-14：Testing and measurement techniques－Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
KS C IEC 61000-4-14:2010 Electromagnetic compatibility(EMC)－Part 4-14：Testing and measurement techniques－Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
KS B ISO TS 15768:2020 Measurement of liquid velocity in open channels —Design, selection and use of electromagnetic current meters
KS C IEC 61000-4-14-2010(2022) Electromagnetic compatibility(EMC)－Part 4-14：Testing and measurement techniques－Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
KS C IEC 61000-3-5:2010 Electromagnetic compatibility(EMC)-Part 3-5:Limits-Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A
KS C IEC 61000-4-13-2010(2017) Electromagnetic compatibility(EMC)－Part 4-13：Testing and measurement techniques－Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
KS C IEC 61000-4-17-2010(2017) Electromagnetic compatibility(EMC)－Part 4-17：Testing and measurement techniques－Ripple on d.c. input power port immunity test
KS C IEC 61000-4-13-2010(2022) Electromagnetic compatibility(EMC)－Part 4-13：Testing and measurement techniques－Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
KS C IEC 61000-3-5-2010(2017) Electromagnetic compatibility(EMC)－Part 3-5：Limits－Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A
KS C IEC 61000-4-17-2010(2022) Electromagnetic compatibility(EMC)－Part 4-17：Testing and measurement techniques－Ripple on d.c. input power port immunity test
KS C IEC 61000-4-13:2010 Electromagnetic compatibility(EMC)－Part 4-13：Testing and measurement techniques－Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
KS C IEC 62053-24-2017(2022) Electricity metering equipment (a.c.) ― Particular requirements ― Part 24 : Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1S and 1)
KS C IEC 61000-3-3:2005 Electromagnetic compatibility(EMC)-Part 3-3:Limits-Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
KS C IEC 61000-3-3:2014 Electromagnetic compatibility(EMC) — Part 3-3: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
KS C IEC 61000-3-5-2010(2022) Electromagnetic compatibility(EMC)－Part 3-5：Limits－Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A
KS C IEC 61000-4-17:2010 Electromagnetic compatibility(EMC)－Part 4-17：Testing and measurement techniques－Ripple on d.c. input power port immunity test
KS R 5077-2-2008(2018) Test method for automotive electronic engine coolant control equipments－Part 2：Coolant flow control solenoid valve

Japanese Industrial Standards Committee (JISC), Electromagnetic flowmeter fluctuations

JIS B 7554:1997 Electromagnetic flowmeters
JIS Z 8764:1980 Method of flow measurement by electromagnetic flowmeters
JIS H 7311:2018 Superconductivity -- AC loss measurements -- Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
JIS H 7310:2006 Superconductivity -- AC loss measurements -- Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method
JIS H 7310:2013 Superconductivity -- AC loss measurements -- Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
JIS H 7311:2006 Superconductivity -- AC loss measurements -- Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
JIS C 61000-4-14:2004 Electromagnetic compatibility (EMC) -- Part 4-14: Testing and measurement techniques -- Voltage fluctuation immunity test

Professional Standard - Urban Construction, Electromagnetic flowmeter fluctuations

CJ/T 3017-1993 Submersible electromagnetic flowmeter
CJ/T 364-2011 Online calibration requirement for piping electromagnetic flowmeter

United States Navy, Electromagnetic flowmeter fluctuations

NAVY MIL-F-24291 C NOTICE 1-1998 FLOWMETER, FLUID ELECTROMAGNETIC TYPE
NAVY MIL-F-24291 C-1990 FLOWMETER, FLUID ELECTROMAGNETIC TYPE
NAVY DOD-STD-2146 VALID NOTICE 1-1989 DIRECT CURRENT GENERATORS AND MOTORS, LOW STRAY MAGNETIC FIELD, DESIGN OF (METRIC)
NAVY DOD-STD-2146-1983 DIRECT CURRENT GENERATORS AND MOTORS, LOW STRAY MAGNETIC FIELD, DESIGN OF (METRIC)

未注明发布机构, Electromagnetic flowmeter fluctuations

BS ISO/TR 11974:1997(1999) Measurement of liquid flow in open channels — Electromagnetic current meters
BS ISO TS 15768:2000 Measurement of liquid velocity in open channels - Design , selection and use of electromagnetic current meters
BS EN ISO 6817:1997(1999) Measurement of conductive liquid flow in closed conduits — Method using electromagnetic flowmeters
BS ISO 13359:1998(1999) Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length

British Standards Institution (BSI), Electromagnetic flowmeter fluctuations

BS EN ISO 6817:1993 Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters
BS EN ISO 20456:2019 Measurement of fluid flow in closed conduits. Guidance for the use of electromagnetic flowmeters for conductive liquids
BS ISO/TS 15768:2000 Measurement of liquid velocity in open channels - Design, selection and use of electromagnetic current meters
16/30323541 DC BS ISO 20456. Measurement of fluid flow in closed conduits. Guidance for the use of electromagnetic flowmeters for conductive liquids
BS ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
BS EN 29104:1991 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
BS EN 61000-3-3:1995 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection
BS EN 61000-4-14:1999 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage fluctuation immunity test
BS EN 61000-4-14:1999+A2:2009 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
BS EN 61788-8:2003 Superconductivity - AC loss measurements - Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method
BS EN 61000-4-17:1999+A2:2009 Electromagnetic compatibility (EMC). Testing and measurement techniques. Ripple on d.c. input power port immunity test
BS EN 61788-13:2003 Superconductivity - AC loss measurements - Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
BS EN 61000-4-13:2002+A2:2016 Electromagnetic compatibility (EMC) - Testing and measurement techniques. Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
DD IEC/TS 61000-3-5:2009 Electromagnetic compatibility (EMC) - Limits. Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A
BS EN 62054-11:2004+A1:2017 Electricity metering (a.c.). Tariff and load control. Particular requirements for electronic ripple control receivers
BS EN 61000-4-13:2002+A1:2009 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
BS EN 61000-4-13:2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests - Test for immunity to harmonics and interharmonics including mains signall
BS EN 61788-8:2010 Superconductivity. AC loss measurements. Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
BS EN ISO 2360:2003 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method
BS EN 61000-4-17:1999 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Ripple on d.c. input power port immunity test
BS DD IEC/TS 61000-3-5:2010 Electromagnetic compatibility (EMC). Limits. Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A
BS DD IEC/TS 61000-3-5:2009 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A
BS IEC 1000-3-5:1995 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A
23/30451875 DC BS EN 61000-3-3. Electromagnetic compatibility (EMC) - Part 3. Limits. Section 3. Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current 16 A
BS EN 61000-3-11:2001 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated voltage current 75 A and subject to conditional connection
15/30328438 DC BS EN 62054-21 AMD1. Electricity metering (a.c.). Tariff and load control. Part 21. Particular requirements for electronic ripple control receivers
BS PD IEC/TR 61000-4-38:2015 Electromagnetic compatibility (EMC). Testing and measurement techniques. Test, verification and calibration protocol for voltage fluctuation and flicker compliance test systems
PD IEC/TR 61000-4-38:2015 Electromagnetic compatibility (EMC). Testing and measurement techniques. Test, verification and calibration protocol for voltage fluctuation and flicker compliance test systems

National Metrological Verification Regulations of the People's Republic of China, Electromagnetic flowmeter fluctuations

JJG 1033-2007 Electromagnetic Flowmeters
JJG 2087-1990 Verification Scheme of Measuring Instruments for DC EMF'S
JJG 1139-2017 Low Voltage Metering Current Transformer Automatic Testing System

American National Standards Institute （ANSI), Electromagnetic flowmeter fluctuations

ANSI/ASME MFC-16M-2007 Measurement of Fluid Flow in Closed Conduits by Means of Electromagnetic Flowmeters

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Electromagnetic flowmeter fluctuations

GJB 5998-2007 Specincation for electromagnetic flowmeters of ships

Underwriters Laboratories (UL), Electromagnetic flowmeter fluctuations

UL SUBJECT 327B-2011 OUTLINE OF INVESTIGATION FOR ULTRASONIC AND MAGNETIC TYPE WATER FLOW METERS (Issue Number 2)
UL SUBJECT 327B-2010 OUTLINE OF INVESTIGATION FOR ULTRASONIC AND MAGNETIC TYPE RESIDENTIAL WATER FLOW METERS Issue Number 1

Professional Standard - Coal, Electromagnetic flowmeter fluctuations

MT/T 525-1995 LCZ-80 microcomputer ultrasonic flowmeter

Professional Standard - Nuclear Industry, Electromagnetic flowmeter fluctuations

EJ/T 598-1991 Technical conditions of double-tube electromagnetic flowmeter

RO-ASRO, Electromagnetic flowmeter fluctuations

STAS 11298-1980 ELECTROMAGNETIC FLOWMETERS General tehnical requirements for quality

American Society of Mechanical Engineers (ASME), Electromagnetic flowmeter fluctuations

ASME MFC-16-2007 Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters
ASME MFC-16-2014(R2019) Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters
ASME MFC-16-2014 Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters
ASME MFC-16M-1995 Measurement of fluid flow in closed conduits by means of electromagnetic flowmeters
ASME MFC-5.3-2013 Measurement of Liquid Flow in Closed Conduits Using Doppler Ultrasonic Flowmeters

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Electromagnetic flowmeter fluctuations

GB/T 18659-2023 Guidelines for the use of electromagnetic flowmeters for measuring fluid flow in closed pipes
GB/T 18660-2002 Measurement of conductive liquid flow in closed conduits--Method using electromagnetic flowmeters
GB/T 18659-2002 Measurement of fluid flow in closed conduits--Methods of evaluating the performance of electromagnetic flow-meters for liquids
GB/T 20729-2006 Measurement of conductive liquid flow in closed conduits Flanged electromagnetic flowmeters Overall length
GB/T 28569-2012 Electric energy metering for electric vehicle AC charging spot
GB/T 17626.14-2005 Electromagnetic compatibility Testing and measurement techniques Voltage fluctuation immunity test
GB/T 13998-1992 Measuring methods of the magnetic induced longitudinal EMF,magnetic induced voltage with respect to earth,electric induced current and psophometric voltage on telecommunication lines
GB/T 29815-2013 The electromagnetic flowmeter based on HART protocol general technical specification
GB/T 17626.13-2006 Electromagnetic compatibility Testing and measurement techniques Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity test
GB/T 17626.17-2005 Electromagnetic compatibility Testing and measurement techniques Ripple on d.c.input power port immunity test
GB/T 12826-1991 The calculation guide of the drum(reeling) cable's current rating
GB/Z 17625.3-2000 Electromagnetic compatibility-Limits-Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16A
GB 17625.2-1999 Electromagnetic compatibility. Limits. Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current≤16A
GB/T 17625.7-2013 Electromagnetic compatibility.Limits.Limitation of voltage changes,voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current≤75 A and subject to conditional connection

Association Francaise de Normalisation, Electromagnetic flowmeter fluctuations

NF X10-120:1995 Measurement of conductive liquid flow in closed conduits. Method using electromagnetic flow meters.
NF X10-121*NF EN ISO 20456:2019 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids
NF EN ISO 20456:2019 Mesurage du débit des fluides dans les conduites fermées - Lignes directrices pour l'utilisation des débitmètres électromagnétiques dans les liquides conducteurs
NF X10-121:1993 Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids.
NF C46-305:1981 Industrial-Process Measurement and Control Electromagnetic flowmeters Qualification Requirements
UTE C46-305U*UTE C46-305:1981 Industrial-process measurement and control. Electromagnetic flowmeters. Qualification requirments.
NF C91-004-17/A2*NF EN 61000-4-17/A2:2009 Electromagnetic compatibility (EMC) - Part 4-17 : testing and measurement techniques - Ripple on d.c. input power port immunity test
NF C91-004-17*NF EN 61000-4-17:1999 Electromagnetic compatibility (EMC) - Part 4-17 : testing and measurement techniques - Ripple on d.c. input power port immunity test.
NF UTE C46-305:1981 Mesure et commande dans les processus industriels - Débitmètres électromagnétiques - Prescriptions de qualification - Prescriptions provisoires.
NF EN 61788-13:2013 Supraconductivité - Partie 13 : mesure des pertes en courant alternatif - Méthodes de mesure par magnétomètre des pertes par hystérésis dans les composites multi-filamentaires supraconducteurs
NF C31-888-8:2003 Superconductivity - Part 8 : AC loss measurements - Total AC loss measurement of Cu/Nb To composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method.
NF C91-004-14/A1*NF EN 61000-4-14/A1:2004 Electromagnetic compatibility (EMC) - Part 4-14 : testing and measurement techniques - Voltage fluctuation immunity test
NF C91-004-14*NF EN 61000-4-14:1999 Electromagnetic compatibility (EMC) - Part 4-14 : testing and measurement techniques - Voltage fluctuation immunity test
NF EN 61000-4-14/A1:2004 Compatibilité électromagnétique (CEM) - Partie 4-14 : techniques d'essai et de mesure - Essai d'immunité aux fluctuations de tension
NF EN 61000-4-14:1999 Compatibilité électromagnétique (CEM) - Partie 4-14 : techniques d'essai et de mesure - essai d'immunité aux fluctuations de tension
NF EN 61000-4-14/A2:2009 Compatibilité électromagnétique (CEM) - Partie 4-14 : techniques d'essai et de mesure - Essai d'immunité aux fluctuations de tension pour le matériel dont le courant d'entrée est inférieur ou égal à 16 A par phase
NF C91-004-13/A1*NF EN 61000-4-13/A1:2009 Electromagnetic compatibility (EMC) - Part 4-13 : testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
NF C31-888-13*NF EN 61788-13:2013 Superconductivity - Part 13 : AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
NF C91-004-13/A2*NF EN 61000-4-13/A2:2016 Electromagnetic compatibility (EMC) - Part 4-13 : testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
NF EN 61000-4-17/A1:2004 Compatibilité électromagnétique (CEM) - Partie 4-17 : techniques d'essai et de mesure - Essai d'immunité à l'ondulation résiduelle sur entrée de puissance à courant continu
NF EN 61000-4-17:1999 Compatibilité électromagnétique (CEM) - Partie 4-17 : techniques d'essai et de mesure - Essai d'immunité à l'ondulation résiduelle sur entrée de puissance à courant continu
NF EN 61000-4-17/A2:2009 Compatibilité électromagnétique (CEM) - Partie 4-17 : techniques d'essai et de mesure - Essai d'immunité à l'ondulation résiduelle sur entrée de puissance à courant continu
NF EN 61000-3-3/A1:2019 Compatibilité électromagnétique (CEM) - Partie 3-3 : limites - Limitation des variations de tension, des fluctuations de tension et du papillotement dans les réseaux publics d'alimentation basse tension, pour les matériels ayant un courant assign...
NF EN 61000-3-3:2014 Compatibilité électromagnétique (CEM) - Partie 3-3 : limites - Limitation des variations de tension, des fluctuations de tension et du papillotement dans les réseaux publics d'alimentation basse tension, pour les matériels ayant un courant assign...
NF EN 61000-4-13:2002 Compatibilité électromagnétique (CEM) - Partie 4-13 : techniques d'essai et de mesure - Essais d'immunité basse fréquence aux harmoniques et inter-harmoniques incluant les signaux transmis sur le réseau électrique alternatif
NF EN 61000-4-13/A2:2016 Compatibilité électromagnétique (CEM) - Partie 4-13 : techniques d'essai et de mesure - Essais d'immunité basse fréquence aux harmoniques et inter-harmoniques incluant les signaux transmis sur le réseau électrique alternatif
NF EN 61000-4-13/A1:2009 Compatibilité électromagnétique (CEM) - Partie 4-13 : techniques d'essai et de mesure - Essais d'immunité basse fréquence aux harmoniques et inter-harmoniques incluant les signaux transmis sur le réseau électrique alternatif
NF C91-004-17/A1*NF EN 61000-4-17/A1:2004 Electromagnetic compatibility (EMC) - Part 4-17 : testing and measurement techniques - Ripple on d.c. input power port immunity test
NF C44-054-11/A1*NF EN 62054-11/A1:2017 Electricity metering (a.c.) - Tariff and load control - Part 11 : particular requirements for electronic ripple control receivers
NF EN IEC 61000-3-11:2019 Compatibilité électromagnétique (CEM) - Partie 3-11 : limites - Limitation des variations de tension, des fluctuations de tension et du papillotement dans les réseaux publics d'alimentation basse tension - Équipements ayant un courant assigné in...
NF C91-004-13*NF EN 61000-4-13:2002 Electromagnetic compatibility (EMC) - Part 4-13 : testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

German Institute for Standardization, Electromagnetic flowmeter fluctuations

DIN EN ISO 6817:1995 Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992); German version EN ISO 6817:1995
DIN EN ISO 20456:2020-09 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017); German version EN ISO 20456:2019
DIN EN ISO 20456:2020 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
DIN ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged-type electromagnetic flowmeters - Overall length (ISO 13359:1998)
DIN EN 29104:1993 Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991); German version EN 29104:1993
DIN EN 61000-3-11:2001 Electromagnetic compatibility (EMC) - Part 3-11: Limits; Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems; Equipment with rated current 75 A and subject to conditional connection (IEC 61000-3
DIN EN 61788-8:2011 Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method (IEC 61788-8:2010); German version EN 61788
DIN EN 50475:2009 Basic standard for the calculation and the measurement of human exposure to electromagnetic fields from broadcasting service transmitters in the HF bands (3 MHz - 30 MHz); German version EN 50475:2008
DIN EN 61000-4-29:2001 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests (IEC 61000-4-29:2000); German version EN 61000-4-29:2000
DIN EN 61000-4-17:2005 Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test (IEC 61000-4-17:1999 + A1:2001); German version EN 61000-4-17:1999 + A1:2004

International Organization for Standardization (ISO), Electromagnetic flowmeter fluctuations

ISO/TR 6817:1980 Measurement of conductive fluid flowrate in closed conduits — Method using electromagnetic flowmeters
ISO 20456:2017 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids
ISO 9104:1991 Measurement of fluid flow on closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids
ISO 6817:1992 Measurement of conductive liquid flow in closed conduits; method using electromagnetic flowmeters
ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
ISO/TS 15768:2000 Measurement of liquid velocity in open channels - Design, selection and use of electromagnetic current meters

ES-UNE, Electromagnetic flowmeter fluctuations

UNE-EN ISO 20456:2021 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
UNE-EN 61000-4-13:2003/A2:2016 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

European Committee for Standardization (CEN), Electromagnetic flowmeter fluctuations

EN ISO 20456:2019 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
EN 29104:1993 Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)
EN ISO 6817:1995 Measurement of Conductive Liquid Flow in Closed Conduits - Method Using Electromagnetic Flowmeters ISO 6817: 1992
EN ISO 2360:1995 Non-Conductive Coatings on Non-Magnetic Basis Metals - Measurement of Coating Thickness - Eddy Current Method (ISO 2360 : 1982)
EN ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method
EN ISO 2360:2003 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method ISO 2360:2003

Danish Standards Foundation, Electromagnetic flowmeter fluctuations

DS/EN ISO 6817:1996 Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters
DS/EN 29104:1994 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
DS/ISO 9104:1994 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
DS/EN 29104:1993 Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids
DS/EN 61000-4-14/A1:2004 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test
DS/EN 61000-4-14:2000 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test
DS/EN 61000-4-14/A2:2009 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
DS/EN 61000-4-13/A1:2009 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
DS/EN 61000-4-13:2002 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics, including mains signalling at a.c. power port, low frequency immunity tests
DS/EN 61000-4-17/A1:2004 Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
DS/EN 61000-4-17:2000 Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
DS/EN 61000-4-17/A2:2009 Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
DS/EN 61000-3-3:1995 Electromagnetic compatibility (EMC) - Part 3: Limits - Section 3: Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current ≤ 16 A
DS/IEC/TS 61000-3-5:2009 Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A

NL-NEN, Electromagnetic flowmeter fluctuations

NEN-ISO 9104:1994 Measurement of fluid flow in xlosed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)

Lithuanian Standards Office , Electromagnetic flowmeter fluctuations

LST EN ISO 6817:2001 Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992)
LST EN 29104-2001 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)
LST EN 61000-4-14-2001 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase (IEC 61000-4-14:1999)
LST EN 61000-4-13-2003 Electromagnetic compatibility (EMC). Part 4-13: Testing and measurement techniques. Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests (IEC 61000-4-13:2002)
LST EN 61000-4-14-2001/A1-2004 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase (IEC 61000-4-14:1999/A1:2001)
LST EN 61000-4-14-2001/A2-2009 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase (IEC 61000-4-14:1999/A2:2009)
LST EN 61000-4-13-2003/A1-2009 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests (IEC 61000-4-13:2002/A1:2009)
LST EN 61000-4-17-2001 Electromagnetic compatibility (EMC). Part 4-17: Testing and measurement techniques. Ripple on d.c. input power port immunity test (IEC 61000-4-17:1999)
LST EN 61000-4-17-2001/A1-2004 Electromagnetic compatibility (EMC). Part 4-17: Testing and measurement techniques. Ripple on d.c. input power port immunity test (IEC 61000-4-17:1999/A1:2001)
LST EN 61000-4-17-2001/A2-2009 Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test (IEC 61000-4-17:1999/A2:2008)

AENOR, Electromagnetic flowmeter fluctuations

UNE-EN ISO 6817:1996 MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CONDUITS. METHOD USING ELECTROMAGNETIC FLOWMETERS. (ISO 6817:1992).
UNE-EN 29104:1996 MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS. METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOW-METERS FOR LIQUIDS. (ISO 9104:1991).
UNE-EN 61000-4-14:2001/A1:2005 Electromagnetic compatibility (EMC) -- Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16A per phase.
UNE-EN 61000-4-14:2001 Electromagnetic compatibility (EMC) -- Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16A per phase.
UNE-EN 61000-4-13:2003/A1:2010 Electromagnetic compatibility (EMC) -- Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
UNE-EN 61000-4-13:2003 Electromagnetic compatibility (EMC) -- Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
UNE-EN 61000-4-17:2001/A2:2009 Electromagnetic compatibility (EMC) -- Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
UNE-EN 61000-4-17:2001 Electromagnetic compatibility (EMC) -- Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test.
UNE-EN 61000-4-17:2001/A1:2005 Electromagnetic compatibility (EMC) -- Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
UNE-EN 62054-11:2006/A1:2017 Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers
UNE-EN 61000-4-14:2001/A2:2010 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phaseCompatibilité électromagnétique (CEM) - Partie 4-14: Techniques d'essai et
UNE-EN 61000-3-11:2002 Electromagnetic compatibility (EMC) -- Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current
UNE-EN 61000-3-3:2013 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current
UNE 21000-3-5:2001 IN Electromagnetic compatibility (EMC) - Part 3: Limits - Section 5: Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A.

American Society for Testing and Materials (ASTM), Electromagnetic flowmeter fluctuations

ASTM D5089-95(1999) Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
ASTM D5089-95(2014) Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters

Professional Standard - Environmental Protection, Electromagnetic flowmeter fluctuations

HJ/T 367-2007 Technical requirement for environmental protection products. Electromagnetic pipe flowmeters

AT-ON, Electromagnetic flowmeter fluctuations

ONORM EN 29104-1993 Measurement of fluid flow in closed conduits - Methods of evaluating the Performance of electromagnetic flow-meters forliquids (ISO 9104:1991)

Standard Association of Australia （SAA）, Electromagnetic flowmeter fluctuations

AS/NZS 61000.4.14:2007 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage fluctuation immunity test
AS/NZS 61000.4.14:2012
AS/NZS 61000.4.13:2006 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
AS 2360.1.5:2001 Measurement of fluid flow in closed conduits - Pressure differential methods - Measurement using orifice plates, nozzles or Venturi meters - Pulsating flow, in particular sinusoidal or square wave intermittent periodic-type fluctuations
AS/NZS 61000.4.13:2012
AS/NZS 61000.3.5:1998 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A
AS/NZS 61000.3.11:2002 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current less than or equal to 75 A and subject to conditional connection

Professional Standard - Electron, Electromagnetic flowmeter fluctuations

SJ/T 9559.5-1993 D.C. permanent magnet torque motor--Quality grading standard
SJ/T 9559.11-1993 D.C. brushless motors for use in diskette drivers--Quality grading standard
SJ/T 9559.12-1993 D.C. servomotors for data tape transport--Quality grading standard
SJ/T 9559.9-1993 D.C. permanent magnet motors for recorders--Quality grading standard
SJ/T 9559.14-1993 16 SYK08-16 SYK08-J368,20SYK08 permanent magnet moving coil servomotors--Quality grading standardJ368,20SYK08 permanent magnet moving coil servomotors--Quality grading standard

ZA-SANS, Electromagnetic flowmeter fluctuations

SANS 61000-4-14:2009 Electromagnetic compatibility (EMC) Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
SANS 61000-4-14:2003 Electromagnetic compatibility (EMC) Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test
SANS 61000-4-13:2006 Electromagnetic compatibility (EMC) Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
SANS 61000-4-17:2009 Electromagnetic compatibility (EMC) Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
SANS 61000-4-13:2009 Electromagnetic compatibility (EMC) Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
SANS 62055-51:2007 Electricity metering - Payment systems Part 51: Standard transfer specification (STS) - Physical layer protocol for one-way numeric and magnetic card token carriers
SANS 61000-3-5:2006 Electromagnetic compatibility (EMC) Part 3: Limits Section 5: Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A
SANS 61000-3-11:2003 Electromagnetic compatibility (EMC) Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection
SANS 61000-3-5:2009 Electromagnetic compatibility (EMC) Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A

BR-ABNT, Electromagnetic flowmeter fluctuations

ABNT P-MB-328-1966

International Electrotechnical Commission (IEC), Electromagnetic flowmeter fluctuations

IEC 61000-3-2/COR1:2009 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 16 A per phase); Correction 1
IEC 61000-4-14:2002 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques; Voltage fluctuation immunity test
IEC 61000-4-14:1999+AMD1:2001+AMD2:2009 CSV Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
IEC 61000-4-14:1999 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test
IEC 61000-4-14:1999+AMD1:2001 CSV Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test
IEC 61000-4-14:2009 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
IEC 61000-4-13:2009 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
IEC 61788-13:2012 Superconductivty - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
IEC 61788-8:2010 Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
IEC 61788-13:2003 Superconductivity - Part 13: AC loss measurements; Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
IEC 61000-4-14:1999/AMD2:2009 Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
IEC 61000-4-13:2002+AMD1:2009 CSV Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
IEC 61000-4-11:2001 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measuring techniques; Voltage dips, short interruptions and voltage variations immunity tests
IEC 62054-11:2004+AMD1:2016 CSV Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers
IEC 61000-4-14:1999/AMD1:2001 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques; Voltage fluctuation immunity test; Amendment 1
IEC 61000-4-17:1999/AMD2:2008 Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
IEC 61000-4-17:2009 Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques - Ripple on d.c. input power port immunity test
IEC 61000-4-17:1999+AMD1:2001+AMD2:2008 CSV Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
IEC 61000-4-17:1999+AMD1:2001 CSV Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
IEC 61000-4-13:2002/AMD2:2015 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
IEC 61000-4-13:2015 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
IEC TS 61000-3-5:2009/COR1:2009 Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A; Corrigendum 1
IEC 61000-3-3:2005 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per p
IEC TR2 61000-3-5:1994 Electromagnetic compatibility (EMC) - Part 3: Limits; section 5: Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A
IEC 61000-3-3:1994 Electromagnetic compatibility (EMC) - Part 3: Limits; section 3: Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current 16 A
IEC TS 61000-3-5:2009 Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A
IEC 61000-4-13:2002/AMD1:2009 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests; Amendment 1
IEC 61000-4-13:2002 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques; Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
IEC 61000-4-17:1999/AMD1:2001 Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
IEC 61000-3-3/AMD1:2001 Electromagnetic compatibility (EMC) - Part 3-3: Limits; Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connec
IEC TS 61000-3-5:2009/COR2:2010 Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A
IEC TR 61547-1:2020 Equipment for general lighting purposes - EMC immunity requirements - Part 1: Objective light flickermeter and voltage fluctuation immunity test method
IEC TR 61547-1:2020 RLV Equipment for general lighting purposes - EMC immunity requirements - Part 1: Objective light flickermeter and voltage fluctuation immunity test method
IEC 77A/681/DTS:2009 IEC/TS 61000-3-5, Ed. 2: Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A

PT-IPQ, Electromagnetic flowmeter fluctuations

NP 4360-1999 Meters for cold potable water Electromagnetic flowmeters. Terminology, definitions, technical characteristics and metrological characteristics

Institute of Electrical and Electronics Engineers (IEEE), Electromagnetic flowmeter fluctuations

IEEE 1453-2004 Practice for measurement and limits of voltage fluctuations and associated light flicker on ac power systems
IEEE 1453-2022 IEEE Standard for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems
IEEE Std 1453-2004 (Adoption of CEI/IEC 61000-4-15:1997+A1:2003) IEEE Recommended Practice for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems
IEEE P1453/D4.1, May 2021 IEEE Draft Standard for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems
IEEE P1453/D5.1, February 2022 IEEE Draft Standard for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems
IEEE P1453/D5.0, December 2021 IEEE Draft Standard for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems
IEEE Std 1453-2004 IEEE Recommended Practice for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems

KR-KS, Electromagnetic flowmeter fluctuations

KS B ISO TS 15768-2020 Measurement of liquid velocity in open channels —Design, selection and use of electromagnetic current meters
KS E ISO 7194-1-2018(2023) Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current meters or pitot static tubes
KS R 5077-2-2008(2023) Test method for automotive electronic engine coolant control equipments－Part 2：Coolant flow control solenoid valve

National Metrological Technical Specifications of the People's Republic of China, Electromagnetic flowmeter fluctuations

JJF 1042-1993 Technical Specification of Measurement Assurance Program for DC EMF'S

Shandong Provincial Standard of the People's Republic of China, Electromagnetic flowmeter fluctuations

DB37/T 2445-2013 Composite variable ratio current transformer automatic conversion metering device

Indonesia Standards, Electromagnetic flowmeter fluctuations

SNI IEC 61000-4-13:2013 Electromagnetic Compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

Canadian Standards Association (CSA), Electromagnetic flowmeter fluctuations

CSA C61000-3-11:06-CAN/CSA-2006 Compatibilit?閘ectromagn閠ique (CEM) ?Partie 3-11: Limites ?Limitation des variations de tension, des fluctuations de tension et du papillotement dans les r閟eaux publics d抋limentation basse tension ?Equipements ayant un courant appel??5 A et soumis ?un
CSA C61000-3-3-06-CAN/CSA-2006 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current less than or equal to 16 A per phase and not subject to condit
CAN/CSA-CEI/IEC 61000-4-14:2001 Electromagnetic Compatibility (EMC) - Part 4-14: Testing and Measurement Techniques - Voltage Fluctuation Immunity Test (First Edition)
CAN/CSA-CEI/IEC 61000-4-14 AMD 2:2010 Amendment 2 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase (First Edition)
CAN/CSA-CEI/IEC 61000-4-14 AMD 1:2003 Amendment 1 Electromagnetic compatibility (EMC) – Part 4-14: Testing and measurement techniques – Voltage fluctuation immunity test (First Edition)
CAN/CSA-IEC/TS 61000-3-5:2012 Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A (First Edition)
CSA CEI 61000-4-14-01-CAN/CSA-2001 Compatibilite Electromagnetique (CEM) - Partie 4-14: Techniques D'essai Et De Mesure - Essai D'immunite Aux Fluctuations De Tension Premiere Edition
CSA IEC 61000-4-14-01-CAN/CSA:2001 Electromagnetic Compatibility (EMC) - Part 4-14: Testing and Measurement Techniques - Voltage Fluctuation Immunity Test First Edition

GOSTR, Electromagnetic flowmeter fluctuations

GOST R 59032.2-2020 High-voltage direct current power transmission. Guidance to the specification and design evaluation of AC filters. Part 2. Measuring and testing on site

TH-TISI, Electromagnetic flowmeter fluctuations

TIS 1450-2010 Electromagnetic compatibility (emc).part 3: limits.section 5: limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 a

Society of Automotive Engineers (SAE), Electromagnetic flowmeter fluctuations

SAE J1113/26-2013 Electromagnetic Compatibility Measurement Procedure for Vehicle Components Immunity to AC Power Line Electric Fields
SAE J1113/26-2014 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Immunity to AC Power Line Electric Fields

NZ-SNZ, Electromagnetic flowmeter fluctuations

SA/SNZ TS IEC 61000.3.5:2013 Electromagnetic compatibility (EMC) Part 3.5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A

CN-QIYE, Electromagnetic flowmeter fluctuations

Q/GDW 1573-2014 Technical specifications for automatic verification system of low-voltage current transformers for metering

Professional Standard - Automobile, Electromagnetic flowmeter fluctuations

QC/T 29117.18.1-1993 Motorcycles and mopeds product quality inspection engine permanent magnet alternator quality assessment method

European Committee for Electrotechnical Standardization（CENELEC）, Electromagnetic flowmeter fluctuations

EN 61000-3-3:2008 Electromagnetic Compatibility (EMC) - Part 3-3: Limits - Limitation of Voltage Changes, Voltage Fluctuations and Flicker in Public Low-Voltage Supply Systems, for Equipment with Rated Current Less Than or Equal to 16 A per Phase and Not Subject to Conditi
EN 61000-4-13:2002 Electromagnetic compatibility (EMC) Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests (Incorporates Amendment A1: 2009)

CENELEC - European Committee for Electrotechnical Standardization, Electromagnetic flowmeter fluctuations

EN 61000-3-3:2013 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes@ voltage fluctuations and flicker in public low-voltage supply systems@ for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
EN 61000-3-3:1995 Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 3: Limitation of Voltage Changes@ Voltage Fluctuations and Flicker in Public Low-Voltage Supply Systems@ for Equipment with Rated Current Less Than or Equal to 16 A per Phase and Not Subject t