ZH
RU
ES

Research Aerospace

Research Aerospace, Total:500 items.

In the international standard classification, Research Aerospace involves: Materials for aerospace construction, Space systems and operations, Components for aerospace construction, Structure and structure elements, Fasteners for aerospace construction, Aircraft and space vehicles in general, Iron and steel products, Coatings and related processes used in aerospace industry, Aerospace electric equipment and systems, Ground service and maintenance equipment, Welding, brazing and soldering, Aerospace fluid systems and components, Non-ferrous metals, Bearings, Passenger and cabin equipment, Springs, Fasteners, Radiocommunications, Non-destructive testing, On-board equipment and instruments, Products of non-ferrous metals, Testing of metals.

American Institute of Aeronautics and Astronautics (AIAA), Research Aerospace

AIAA R-004-1992 Atmospheric and Space Flight Vehicle Coordinate Systems

European Association of Aerospace Industries, Research Aerospace

AECMA PREN 2225-1977 Steel FE-PL32 Hardened and Tempered Hand and Die Forgings Aerospace Series Edition 1
AECMA PREN 2223-1977 Steel FE-PL32 Hardened and Tempered Bars Aerospace Series Edition 1
AECMA PREN 2031-1977 Steel FE-PL31 Hardened and Tempered Bars Aerospace Series Edition 1
AECMA PREN 2515-1989 Aerospace Series Rod Ends, Adjustable Single Fork and Threaded Shank Dimensions and Loads
AECMA PREN 2601-1990 Aerospace Series Fork Ends, Adjustable Technical Specification Issue P 1
AECMA PREN 2587-1989 Aerospace Series Rod-Ends, Adjustable Double Fork and Threaded Shank Dimensions and Loads
AECMA PREN 2791-1986 Aerospace Series Rod-Ends, Adjustable Single Fork and Threaded Shank Dimensions and Loads Issue P 1
AECMA PREN 2792-1986 Aerospace Series Rod Ends, Adjustable Double Fork and Threaded Shank Dimensions and Loads Issue P 1
AECMA PREN 2222-1977 Steel FE-PL31 Hardened and Tempered Hand and Die Forgings Aerospace Series Edition 1
AECMA PREN 2226-1977 Steel FE-PM43 Hardened and Tempered Hand and Die Forgings De Less Than or Eqal to 150 mm Aerospace Series Edition 1
AECMA PREN 2227-1977 Steel FE-PM44 Hardened and Tempered Hand and Die Forgings De Less Than or Equal to 150 mm Aerospace Series Edition 1
AECMA PREN 2030-1977 Steel FE-PM43 Hardened and Tempered Bars D Less Than or Equal to 150 mm Aerospace Series Edition 1
AECMA PREN 2221-1977 Steel FE-PL31 Hardened and Tempered Hollow Bars 3.5 mm Less Than or Equal to a Less Than or Equal to 55 mm Aerospace Series Edition 1
AECMA PREN 2790-1986 Aerospace Series Rod-Ends, Adjustable Self-Aligning Plain Bearing with Self-Lubricating Liner and Threaded Shank Dimensions and Loads Issue P 1
AECMA PREN 3530-1988 Aerospace Series Steel FE-PA95 Softened Reference Heat Treatment: Solution Treated and Precipitation Treated Forging Stock De Less Than or Equal to 200 mm Issue P 1
AECMA PREN 2159-1977 Steel FE-PM44 Hardened and Tempered Bars D Less Than or Equal to 150 mm Aerospace Series Edition 1
AECMA PREN 3527-1988 Aerospace Series Steel FE-PL51 Annealed Reference Heat Treatment: Hardened and Tempered Forging Stock De Less Than or Equal to 100 mm Issue P 1
AECMA PREN 4424-1998 Aerospace Series Rod-Ends, Adjustable, Single Fork and Threaded Shank with Engagement: 1,5 x Thread Diameter in Titanium Alloys Dimensions and Loads Edition P 1
AECMA PREN 2135-1986 Aerospace Series Steel FE-PL61 Carburized, Hardened and Tempered Bar De Less Than or Equal to 40 mm Issue P 1
AECMA PREN 2763-1998 Aerospace Series Steel FE-PL1504 (33CrMoV12) Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 80 mm 1 200 MPa Less Than or Equal to Rm Less Than or Equal to 1 350 MPa Edition P 3
AECMA PREN 2290-1998 Aerospace Series Rod Bodies Flight Control in Aluminium Alloys for Adjustable End Fittings Dimensions Edition 2
AECMA PREN 2919-1988 Aerospace Series Steel FE-PL72 Carburized, Hardened and Tempered Bar De Less Than or Equal to 160 mm Issue P 1
AECMA PREN 2920-1988 Aerospace Series Steel FE-PL72 Carburized, Hardened and Tempered Forgings De less Than or Equal to 160 mm Issue P 1
AECMA PREN 3491-1998 Aerospace Series Steel FE-PL3901 (X15CrNi17-3) Air Melted Hardened and Tempered Forgings De Less Than or Equal to 100 mm 900 MPa Less Than or Equal to Rm Less Than or Equal to 1 100 Mpa Edition P2
AECMA PREN 3508-1998 Aerospace Series Steel FE-PL1501 (30CrMo12) Air Melted Hardened and Tempered Bar De Less Than or Equal to 100 mm 930 MPa Less Than or Equal to Rm Less Than or Equal to 1 080 MPa Edition P2
AECMA PREN 2224-1977 Steel FE-PL32 Hardened and Tempered Hollow Bars 3.5 mm Less Than or Equal to a Less Than or Equal to 55 mm Aerospace Series Edition 1
AECMA PREN 2290-1981 Rod Bodies Flight Control in Aluminium Alloys for Adjustable End Fittings Dimensions Aerospace Series Edition 1
AECMA PREN 3367-1988 Aerospace Series Steel FE-PL10 Hardened, Tempered and Cold Drawn 1260 Less Than or Equal to Rm Less Than or Equal to 2790 MPa Wire for Spring 0,20 Less Than or Equal to D Less Than or Equal to 10,50 mm Issue P 1
AECMA PREN 3527-1998 Aerospace Series Steel FE-PL1504 (33CrMoV12) Air Melted Softened Forging Stock a or D Less Than or Equal to 300 mm Edition P2
AECMA PREN 3993-1997 Aerospace Series Steel FE-CM1501 (X13CrNiMoCo12-3-2-2) Hardened and Tempered Precision and Sand Castings De Less Than or Equal to 150 mm Rm Greater Than or Equal to 925 MPa Edition P 1
AECMA PREN 4629-2006 Aerospace series Steel FE-PM 3504 (X4CrNiMo16-5-1) Air melted Hardened and tempered Forgings Stock De< or = to 300 mm Edition P 1
AECMA PREN 3541-1990 Aerospace Series Rod Ends, Adjustable, Self-Aligning Ball Bearing with Threaded Shank Dimensions, Torques, Clearances and Loads Edition 1
AECMA PREN 6029-1998 Aerospace Series Rod-Ends, Adjustable, Single Fork with UNJ Threaded Shank Min. Engagement: 1,5 x Thread Diameter in Corrosion Resisting Steel Dimensions and Loads Inch Series Edition P 1
AECMA PREN 4198-1998 Aerospace Series Rod-Ends, Adjustable Self-Aligning Plain Bearing with Self-Lubricating Liner and Thread Shank in Corrosion Resisting Steel Dimensions and Loads Edition P 1
AECMA PREN 4198-1993 Aerospace Series Rod-Ends, Adjustable Self-Aligning Plain Bearing with Self-Lubricating Liner and Thread Shank in Corrosion Resisting Steel Dimensions and Loads
AECMA EN 3280/PRA1-2001 Aerospace Series Bearings, Airframe Rolling Rigid or Self-Aligning Technical Specification Edition 1; Draft Amendment A1 to EN 3280:1994
AECMA PREN 2769-1988 Aerospace Series Steel FE-PL53S Hardened and Tempered 1030 Less Than or Equal to Rm Less Than or Equal to 1180 MPa Forgings De Less Than or Equal to 70 mm Issue P 1
AECMA PREN 2770-1988 Aerospace Series Steel FE-PL53S Hardened and Tempered 1050 Less Than or Equal to Rm Less Than or Equal to 1220 MPa Sheet and Plate 0,5 Less Than or Equal to a Less Than or Equal to 12 mm Issue P 1
AECMA PREN 2771-1988 Aerospace Series Steel FE-PL53S Hardened and Tempered 1100 Less Than or Equal to Rm Less Than or Equal to 1250 MPa Bar De Less Than or Equal to 110mm Issue P 1
AECMA PREN 2779-1988 Aerospace Series Steel FE-PL56 Hardened and Tempered 1250 Less Than or Equal to Rm Less Than or Equal to 1400 MPa Bar De Less Than or Equal to 70 mm Issue P 1
AECMA PREN 2780-1988 Aerospace Series Steel FE-PL56 Hardened and Tempered 1250 Less Than or Equal to Rm Less Than or Equal to 1400 MPa Forgings De Less Than or Equal to 70 mm Issue P 1
AECMA PREN 3520-1994 Aerospace Series Steel FE-PL2105 Air Melted Softened Forging Stock a or D Less Than or Equal to 300 mm Edition P 2
AECMA PREN 4098-1998 Aerospace Series Steel FE-PL1507 (40CrMoV12) Remelted Hardened and Tempered Forgings De Less Than or Equal to 50 mm 1 250 MPa Less Than or Equal to Rm Less Than or Equal to 1 400 MPa Edition P 1
AECMA PREN 2767-1988 Aerospace Series Steel FE-PL79 Carburized, Hardened and Tempered 1180 Less Than or Equal to Rm Less Than or Equal to 1550 MPa Bar for Machining De Less Than or Equal to 150 mm Issue P 2
AECMA PREN 2768-1988 Aerospace Series Steel FE-PL79 Carburized, Hardened and Tempered 1180 Less Than or Equal to Rm Less Than or Equal to 1550 MPa Forgings De Less Than or Equal to 150 mm Issue P 2
AECMA PREN 2445-1998 Steel FE-PL711 900 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Forgings De Less Than or Equal to 45 mm Aerospace Series Edition 2 [Refer To: ASD-STAN PREN 2445]
AECMA PREN 2445-1997 Aerospace Series Steel FE-PL8201 (41NiCrMo2) Air Melted Hardened and Tempered Forgings De Less Than or Equal to 45 mm 900 MPa Less Than or Equal to Rm Less Than or Equal to 1 100 MPa Edition 2
AECMA PREN 3345-1988 Aerospace Series Aluminium Alloy (7150) Solution Treated, Water Quenched Controlled Stretched and Artificially Aged (T6511) Extruded Bar and Section (a or D) Less Than or Equal to 90 mm with Peripheral Coarse Grain Control Issue P 1
AECMA PREN 3528-1988 Aerospace Series Steel FE-PA95 Solution Treated and Precipitation Treatment 1750 Less Than or Equal to Rm Less Than or Equal to 2000 MPa Bar for Machining De Less Than or Equal to 150 mm Issue P 1
AECMA PREN 3509-1988 Aerospace Series Steel FE-PL48 Hardened and Tempered 1050 Less Than or Equal to Rm Less Than or Equal to 1250 MPa Bar for Machining De Less Than or Equal to 40 mm Issue P 1
AECMA PREN 3515-1998 Aerospace Series Steel FE-PL8201 (41NiCrMo2) Air Melted Hardened and Tempered Forgings De Less Than or Equal to 25 mm 1 100 MPa Less Than or Equal to Rm Less Than or Equal to 1 300 MPa Edition P2
AECMA PREN 3515-1988 Aerospace Series Steel FE-PL711 Hardened and Tempered 1100 Less Than or Equal to Rm Less Than or Equal to 1300 MPa Forgings De Less Than or Equal to 25 mm Issue P 1

European Committee for Standardization (CEN), Research Aerospace

EN 2031:2018 Aerospace series - Steel 102Cr6 (1.2067) - Hardened and tempered - Bars
EN 16603-32-11:2014 Space engineering - Modal survey assessment
EN 2601:1996 Aerospace series - Fork ends, adjustable - Technical specification
EN 16603-50-05:2014 Space engineering - Radio frequency and modulation
EN 2135:2017 Aerospace series - Steel FE-PL61 - Carburized@ hardened and tempered - Bar - De ��40 mm
EN 3841-501:2004 Aerospace series - Circuit breakers - Test methods - Part 501: Actuator button travel
EN 2221:2017 Aerospace series - Steel FE-PL31 - Hardened and tempered - Hollow bars - 3@5 mm ��a ��55 mm
EN 2607:2005 Aerospace series - O-rings for adaptors, threaded, with lockring - Survey
EN 2541:2018 Aerospace series - Steel FE-PA18 - Quenched and cold drawn - Wire for spring - D ��4@0 mm
EN 2328:2006 Aerospace series - Washers, tab in corrosion resisting steel, cadmium plated for flight control rods - Dimensions
EN 16603-50-05:2014/AC:2017 Space engineering - Radio frequency and modulation
EN 2743:2001 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials
EN 2515:1990 Aerospace series; rod ends, adjustable single fork and threaded shank; dimensions and loads
EN 2475:2018 Aerospace series - Steel 30CrNiMo8 (1.6580) - Air melted - Hardened and tempered - Bar for machining - De ��100 mm - 1 100 MPa ��Rm ��1 300 MPa
EN 3523:2007 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bar for machining - De <= 100 mm - 1080 MPa <= Rm <= 1280 MPa
EN 3525:2007 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm < a <= 20 mm - 1080 MPa <= Rm <= 1280 MPa
EN 2587:1990 Aerospace series; rod ends, adjustable double fork and threaded shank; dimensions and loads
EN 3490:2007 Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Bar for machining - De <= 200 mm - 900 MPa <= Rm <= 1100 MPa
EN 3972:2006 Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - De <= 50 mm, 1250 MPa <= Rm <= 1400 MPa
EN 3541:1992 Aerospace series; rod ends, adjustable, self-aligning ball bearing with threaded shank; dimensions, torques, clearances and loads
EN 3524:2007 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 2 mm <= a <= 6 mm - 1080 MPa <= Rm <= 1280 MPa
EN 2791:1991 Rod Ends, Adjustable, Single Fork and Threaded Shank with Engagement: 1,5 x Thread DO Dimensions and Loads
EN 2792:1991 Rod Ends, Adjustable, Double Fork and Threaded Shank with Engagement : 1,5 Thread DO Dimensions and Loads
EN 2290-1:1998 Aerospace series - Rod bodies, flight control in aluminium alloy, for adjustable end fittings - Part 1: Dimensions and loads
EN 3653:2010 Aerospace series - Nuts, anchor, self-locking, floating, self- aligning, one lug, in steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 °C
EN 2498:1990 Aerospace series; rod ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank; dimensions and loads
EN 3289:1994 Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2 - Dimensions and loads
EN 2680:2006 Aerospace series - Nuts, anchor, self-locking, floating, self- aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated, metric series - Classification: 900 MPa (at ambient temperature)/235 °C
EN 4639-005:2007 Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 005: Removable alignment sleeve holder - Product standard
EN 4198:2006 Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads
EN 4036:2006 Aerospace series - Rod ends, adjustable with self-aligning double row ball bearing and threaded shank in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads
EN 4591:2005 Aerospace series - Nuts, barrel, self-locking, floating, self- aligning, in heat resisting nickel base alloy, MoS2 lubricated - Classification: 1550 MPa (at ambient temperature) / 315 °C
EN 4424:2006 Aerospace series - Rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 × thread diameter in titanium alloys - Dimensions and loads
EN 4036:2021 Aerospace series - Rod end, adjustable, with self-aligning double row ball bearing and threaded shank, in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads

Association Francaise de Normalisation, Research Aerospace

NF L10-504-002*NF EN 2031:2018 Aerospace series - Steel 102Cr6 (1.2067) - Hardened and tempered - Bars
NF EN 2031:2018 Série aérospatiale - Acier 102cr6 (1.207) - Trempé et revenu - Barres
NF L90-300-32-11*NF EN 16603-32-11:2015 Space engineering - Modal survey assessment
NF EN 2601:1996 Série aérospatiale - Embouts réglables à chape - Spécification technique.
NF EN 2222:2017 Série aérospatiale - Acier FE-PL31 - Trempé et revenu - Pièces forgées et matricées
NF L58-405-501*NF EN 3841-501:2005 Aerospace series - Circuit breakers - Test methods - Part 501 : actuator button travel
NF L35-145*NF EN 2601:1996 Aerospace series. Fork ends, adjustable. Technical specification.
NF ISO 8278:1987 Aéronautique et espace - Pompes hydrauliques à débit variable régulé en fonction de la pression - Exigences générales
NF L36-215*NF EN 2067:1996 Aerospace series. Rod ends with self-aligning ball bearings. Technical specification.
NF EN 2498:1990 Série aérospatiale - Embouts réglables à rotule à garniture autolubrifiante et à tige filetée - Dimensions et charges.
NF EN 2899:2018 Série aérospatiale - Élastomères vulcanisés - Essais de sensibilité à la corrosion en atmosphère humide des métaux au contact des élastomères vulcanisés
NF L31-550*NF EN 2064:1992 Aerospace series. Bearings spherical plain in corrosion resisting steel with self lubricating liners. Technical specification.
NF EN 2587:1990 Série aérospatiale - Embouts réglables à chape double et à tige filetée - Dimensions et charges.
NF EN 2515:1990 Série aérospatiale - Embouts réglables à chape simple et à tige filetée - - Dimensions et charges.
NF L17-403*NF EN 2743:2002 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials.
NF EN 3541:1992 Série aérospatiale - Embouts réglables à rotule sur billes et à tige filetée - Dimensions, couples, jeux et charges.
NF EN 2743:2002 Série aérospatiale - Plastiques renforcés de fibres - Procédures normalisées pour le conditionnement avant essais sur matériaux non vieillis
NF EN 4198:2006 Série aérospatiale - Embouts réglables à rotule, à garniture autolubrifiante, à tige filetée, en acier résistant à la corrosion - Dimensions et charges
NF EN 4057-407:2006 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 407 : vérification du réglage des outils de mise en oeuvre
NF L10-518*NF EN 3525:2007 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm < a < or = 20 mm - 1 080 MPa < or = Rm < or = 1 280 MPa.
NF EN 2221:2017 Série aérospatiale - Acier FE-PL31 - Trempé et revenu - Ébauches tubulaires - 3,5 mm inférieur ou égal à a inférieur ou égal à 55 mm
NF L35-142*NF EN 2515:1990 Aerospace series. Rod ends, adjustable simple fork and threaded shank. Dimensions and loads.
NF L35-143*NF EN 2587:1990 Aerospace series. Rod ens, adjustable fork and threaded shank. Dimensions and loads.
NF EN 2792:1991 Série aérospatiale - Embouts réglables à chape double et à tige filetée à implantation : 1,5 X diamètre filetage - Dimensions et charges.
NF L36-213*NF EN 3541:1992 Aerospace series. Rod ends, adjustable, self-aligning ball bearing with threaded shank. Dimensions, torques, clearances and loads.
NF EN 2791:1991 Série aérospatiale - Embouts réglables à chape simple et à tige filetée à implantation : 1,5 X diamètre filetage - Dimensions et charges.
NF EN 2290-1:1998 Série aérospatiale - Corps de bielles de commandes de vol en alliage d'aluminium pour embouts réglables - Partie 1 : dimensions et charges.
NF L35-121*NF EN 2290-1:1998 Aerospace series. Rod bodies, flight control in aluminium alloy for adjustable end fittings. Part 1 : dimensions and loads.
NF EN 3055:1994 Série aérospatiale - Roulements pour structures d'aéronefs - Roulements en acier résistant à la corrosion, à rotule, sur une rangée de rouleaux - Dimensions et charges.
NF EN 3757:2010 Série aérospatiale - Écrous à river, à freinage interne, flottants, orientables, double patte, acier résistant à chaud, lubrifiés MoS2 - Classification : 900 MPa (à température ambiante)/315oC
NF L31-286:2006 Aerospaces series - Rod ends, adjustable with self-aligning double row ball bearing and treaded shank in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads.
NF L36-226*NF EN 4198:2006 Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads
NF L35-172*NF EN 2498:1990 Aerospace series. Rod ends, ajustable self-aligning plain bearing with self-lubricating liner an threaded shank. Dimensions and loads.
NF EN 3653:2010 Série aérospatiale - Écrous à river, à freinage interne, flottants, orientables, simple patte, en acier, cadmiés, lubrifiés MoS2 - Classification : 900 MPa (à température ambiante)/ 235oC
NF L24-473*NF EN 2680:2006 Aerospace series - Nuts, anchor, self-locking, floating, self-aligning two lug, in alloy steel, cadmium plated, MoS2 lubricated - Classification : 900 MPa (at ambient temperature) / 235 oC.
NF L31-269*NF EN 3289:1994 Aerospace series. Bearings, airframe rolling. Double row self-aligning ball bearings in cdorrosion resisting steel. Diameter series 2. Dimensions and loads.
NF L31-270*NF EN 3290:1994 Aerospace series. Bearings, airframe rolling. Single row self-aligning roller bearings in steel. Diameter series 3 and 4. Dimensions and loads.
NF L31-272*NF EN 3292:1994 Aerospace series. Bearings, airframe rolling. Single row self-aligning roller bearings in corrosion resisting steel. Diameter series 3 and 4. Dimensions and loads.
NF EN 4424:2006 Série aérospatiale - Embouts réglables à chape simple et à tige filetée à implantation : 1,5 x diamètre filetage en alliages de titane - Dimensions et charges
NF EN 2680:2006 Série aérospatiale - Écrous à river, à freinage interne, flottants, orientables, double patte, en acier allié, cadmiés, lubrifiés MoS2 - Classification : 900 MPa (à température ambiante) / 235 oC
NF EN 2790:1991 Série aérospatiale - Embouts réglables à rotule à garniture autolubrifiante et à tige filetée à implantation : 1,5 X diamètre filetage - Dimensions et charges.
NF EN 3292:1994 Série aérospatiale - Roulements pour structures d'aéronefs - Roulements en acier résistant à la corrosion, à rotule, sur une rangée de rouleaux - Séries de diamètres 3 ET4 - Dimensions et charges.
NF EN 4591:2006 Série aérospatiale - Écrous à portée cylindrique, à freinage interne, flottants, orientables, en alliage résistant à chaud à base de nickel, lubrifiés MoS2 - Classification : 1 550 MPa (à température ambiante) / 315oC
NF L36-222*NF EN 2790:1991 Aerospace series. Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement : 1,5 thread diameter. Dimensions and loads.
NF L46-250*NF ISO 7661:1987 Aerospace. Fluid systems. Clamp blocks for tube lines having axial alignment. Design standard and qualification testing. Metric series.
NF L36-227*NF EN 4424:2006 Aerospace series - Rod-ends, adjustable, single fork and threaded shank with engagement : 1,5 x thread diameter in titanium alloys - Dimensions and loads

German Institute for Standardization, Research Aerospace

DIN EN 2031:2019 Aerospace series - Steel 102Cr6 (1.2067) - Hardened and tempered - Bars; German and English version EN 2031:2018
DIN 9462:1987-08 Aerospace; hose assemblies; survey
DIN ISO 1034:1980-04 Aerospace; aircraft, ground air conditioning connections
DIN EN 2601:1996-10 Aerospace series - Fork ends, adjustable - Technical specification; German version EN 2601:1996
DIN 65364:1991 Aerospace; single fork ends for adjustable control rods
DIN 65365:1991 Aerospace; double fork ends for adjustable control rods
DIN EN 2601:1996 Aerospace series - Fork ends, adjustable - Technical specification; German version EN 2601:1996
DIN ISO 1034:1980 Aerospace; aircraft, ground air conditioning connections
DIN EN 3841-501:2005 Aerospace series - Circuit breakers - Test methods - Part 501: Actuator button travel; German and English version EN 3841-501:2004
DIN EN 3507:2007 Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - D ≤ 100 mm - 930 MPa ≤ R ≤ 1080 MPa; German and English version EN 3507:2006
DIN 65099-1:1989-11 Aerospace; classification of special workshop facilities; survey
DIN 65165-1:2014-12 Aerospace - Cockpit utility lights with adjustable light intensity and colour change; Inactive for new design
DIN 65165-1:1985 Aerospace; cockpit utility lights with adjustable light intensity and colour change
DIN EN 3280:2011-09 Aerospace series - Bearings, airframe rolling, rigid or self-aligning - Technical specification; German and English version EN 3280:2011
DIN EN 2607:2007-04 Aerospace series - O-rings for adaptors, threaded, with lockring - Survey; German and English version EN 2607:2005
DIN 65178-1:1985-12 Aerospace; configuration and installation of fluid pipelines; survey and definitions
DIN EN 3541:1992 Aerospace series; rod-ends, adjustable, self-aligning ball bearing, with threaded shank; dimensions, torques, clearances and loads; german version EN 3541:1992
DIN EN 2587:1991 Aerospace series; rod ends, adjustable double fork and threaded shank; dimensions and loads
DIN EN 2515:1991 Aerospace series; rod ends, adjustable single fork and threaded shank; dimensions and loads
DIN EN 2067:1996-04 Aerospace series - Rod ends with self-aligning ball bearings - Technical specification; German version EN 2067:1996
DIN EN 2067:1996 Aerospace series - Rod ends with self-aligning ball bearings - Technical specification; German version EN 2067:1996
DIN EN 16603-32-11:2014 Space engineering - Modal survey assessment; English version EN 16603-32-11:2014
DIN 65165-2:2014-12 Aerospace - Cockpit utility lights with adjustable light intensity and colour change - Technical specification; Inactive for new design
DIN EN 2068:1996-04 Aerospace series - Rod ends with self-lubricating, self-aligning bearings - Technical specification; German version EN 2068:1996
DIN EN 2515:1991-07 Aerospace series; rod ends, adjustable single fork and threaded shank; dimensions and loads
DIN EN 2587:1991-07 Aerospace series; rod ends, adjustable double fork and threaded shank; dimensions and loads
DIN EN 4198:2007-06 Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads; German and English version EN 4198:2006
DIN EN 2743:2003 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials; German and English version EN 2743:2001
DIN 65165-2:1985 Aerospace; cockpit utility lights with adjustable light intensity and colour change; technical specification
DIN EN 16603-50-05:2014 Space engineering - Radio frequency and modulation; English version EN 16603-50-05:2014
DIN EN 2743:2003-06 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials; German and English version EN 2743:2001
DIN 65165-1:2014 Aerospace - Cockpit utility lights with adjustable light intensity and colour change; Inactive for new design
DIN EN 3541:1992-06 Aerospace series; rod-ends, adjustable, self-aligning ball bearing, with threaded shank; dimensions, torques, clearances and loads; german version EN 3541:1992
DIN EN 4036:2021-07 Aerospace series - Rod end, adjustable, with self-aligning double row ball bearing and threaded shank, in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads; German and English version EN 4036:2021
DIN EN 4157:2020-12 Aerospace series - Rod end, with self-aligning double row ball bearing and threaded shank in steel - Dimensions and loads, Inch series; English version prEN 4157:2020 / Note: Date of issue 2020-11-20
DIN EN 4157:2023-11 Aerospace series - Rod end, with self-aligning double row ball bearing and threaded shank in steel - Dimensions and loads, Inch series; German version ASD-STAN prEN 4157:2023 / Note: Date of issue 2023-10-13
DIN 65165-2:2014 Aerospace - Cockpit utility lights with adjustable light intensity and colour change - Technical specification; Inactive for new design
DIN EN 3972:2007 Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - D ≤ 50 mm - 1250 MPa ≤ R ≤ 1400 MPa; German and English version EN 3972:2006
DIN EN 4424:2007-03 Aerospace series - Rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 × thread diameter in titanium alloys - Dimensions and loads; German and English version EN 4424:2006
DIN EN 2498:1991-08 Aerospace series; rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank; dimensions and loads
DIN EN 4035:2021-07 Aerospace series - Rod end, adjustable, with self-aligning double row ball bearing, in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy - Dimensions and loads; German and English version EN 4035:2021
DIN EN 2290-1:1998-10 Aerospace series - Rod bodies flight control in aluminium alloy, for adjustable end fittings - Part 1: Dimensions and loads; German version EN 2290-1:1998
DIN EN 2290-1:1998 Aerospace series - Rod bodies flight control in aluminium alloy, for adjustable end fittings - Part 1: Dimensions and loads; German version EN 2290-1:1998
DIN EN 3053:1994-06 Aerospace series; bearings; airframe rolling, single row self-aligning roller bearings in steel; dimensions and loads; German version EN 3053:1994
DIN EN 3055:1994-06 Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in corrosion resisting steel; dimensions and loads; German version EN 3055:1994
DIN EN 3054:1994-06 Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in steel, cadmium plated; dimensions and loads; German version EN 3054:1994
DIN EN 2498:1991 Aerospace series; rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank; dimensions and loads
DIN EN 2790:1991-10 Aerospace series; rod-ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank, with engagement: 1,5 × thread diameter; dimensions and loads; german version EN 2790:1991
DIN 65121:1992-10 Aerospace; bolts, screws, nuts and associated parts; survey and selection for workshop; inactive for new design
DIN EN 3653:2010 Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, one lug, in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature) / 235 °C; German and English version EN 3653:2010
DIN EN 2015:1995-10 Aerospace - Bearings-airframe rolling, double row self aligning ball bearings in steel; diameter series 2 - Dimensions and loads; inactive for new design; German version EN 2015:1984
DIN EN 2791:1991 Aerospace series; rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 × thread diameter; dimensions and loads; german version EN 2791:1991
DIN EN 2792:1991 Aerospace series; rod-ends, adjustable, double fork and threaded shank with engagement: 1,5 × thread diameter; dimensions and loads; german version EN 2792:1991
DIN 9020-1:1983-10 Aerospace; mass breakdown for aircraft heavier than air; main mass groups and terms of mass; survey
DIN EN 2791:1991-10 Aerospace series; rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 × thread diameter; dimensions and loads; german version EN 2791:1991
DIN EN 2792:1991-10 Aerospace series; rod-ends, adjustable, double fork and threaded shank with engagement: 1,5 × thread diameter; dimensions and loads; german version EN 2792:1991
DIN EN 4639-005:2009 Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 005: Removable alignment sleeve holder - Product standard; German and English version EN 4639-005:2007
DIN EN 4424:2007 Aerospace series - Rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 × thread diameter in titanium alloys - Dimensions and loads; German and English version EN 4424:2006
DIN EN 4198:2007 Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads; German and English version EN 4198:2006

PL-PKN, Research Aerospace

PN L01410-1991 Aerospace series. Dry abraisive blasting of titanium and titanium alloys
PN-EN 4036-2021-08 E Aerospace series -- Rod end, adjustable, with self-aligning double row ball bearing and threaded shank, in corrosion resisting steel, reduced internal radial clearance -- Dimensions and loads
PN-EN 4035-2021-08 E Aerospace series -- Rod end, adjustable, with self-aligning double row ball bearing, in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy -- Dimensions and loads
PN-EN 4825-2021-10 E Aerospace series -- Steel X12CrNiMoV12-3 (1.4938) -- Air melted and consumable electrode remelted -- Hardened and tempered -- Bars -- De ≤ 150 mm -- 900 MPa ≤ Rm ≤ 1 100 MPa

Society of Automotive Engineers (SAE), Research Aerospace

SAE AIR992-1969 Design Guide for Aerospace Ground Air Conditioning
SAE AS7116/2-2002 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR ELECTROCHEMICAL GRINDING (ECG)
SAE AS7100/1-1990 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) SURVEY CHECKLISTS FOR THE NDT SUPPLIERS ACCREDITATION PROGRAM
SAE AS7114/2-1997 Nadcap Requirements for Nondestructive Testing Magnetic Particle Survey Superseding AS 7100/1A

AENOR, Research Aerospace

UNE 28019:1998 AEROSPACE SERIES. GROUND AIR-CONDITIONING CONNECTIONS.
UNE-EN 2601:1997 AEROSPACE SERIES. FORK ENDS, ADJUSTABLE. TECHNICAL SPECIFICATIONS.
UNE-EN 2587:1992 AEROSPACE SERIES. ROD-ENDS, ADJUSTABLE DOUBLE FORK AND THREADED SHANK. DIMENSIONS AND LOADS.
UNE-EN 2515:1992 AEROSPACE SERIES. ROOD-ENDS, ADJUSTABLE SINGLE FORK AND THREADED SHANK. DIMENSIONS AND LOADS.
UNE-EN 2067:1996 AEROSPACE SERIES. ROD ENDS WITH SELF-ALIGNING BALL BEARINGS. TECHNICAL SPECIFICATION.
UNE-EN 3541:1992 AEROSPACE SERIES. ROD ENDS, ADJUSTABLE, SELF-ALIGNING BALL BEARING WITH THREADED SHANK. DIMENSIONS, TORQUES, CLEARANCES AND LOADS
UNE-EN 2068:1996 AEROSPACE SERIES. ROD ENDS WITH SELF-LUBRICATING SELF-ALIGNING BEARINGS. TECHNICAL SPECIFICATION.
UNE-EN 3053:1996 AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. SINGLE ROW SELF-ALIGNING ROLLER BEARINGS IN STEEL. DIMENSIONS AND LOADS.
UNE-EN 3054:1996 AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. SINGLE ROW SELF-ALIGNING ROLLER BEARINGS IN STEEL, CADMIUM PLATED. DIMENSIONS AND LOADS.
UNE-EN 3287:1996 AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. DOUBLE ROW SELF-ALIGNING BALL BEARINGS IN STEEL. DIAMETER SERIES 2. DIMENSIONS AND LOADS.

British Standards Institution (BSI), Research Aerospace

BS EN 16603-32-11:2014 Space engineering. Modal survey assessment
BS EN 3841-501:2005 Aerospace series - Circuit breakers - Test methods - Actuator button travel
BS EN 3841-501:2004 Circuit breakers-Test methods-Part 501:Actuator button travel
BS EN 16603-50-05:2014 Space engineering. Radio frequency and modulation
BS EN 2607:2005 Aerospace series - O-rings for adaptors, threaded, with lockring - Survey
BS EN 12312-17:2004 Aerospace series - Aircraft ground support equipment - Specific requirements - Air conditioning equipment
BS EN 2328:2006 Washers, tab in corrosion resisting steel, cadmium plated for flight control rods - Dimensions
BS ISO 10784-1:2011 Space systems. Early operations. Spacecraft initialization and commissioning
BS EN 2743:2002 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials
BS EN 3523:2007 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bar for machining - De 100 mm - 1080 MPa Rm 1280 MPa
BS EN 3525:2007 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm $3Q a 20 mm - 1080 MPa Rm 1280 MPa
BS EN 3490:2007 Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Bar for machining - De 200 mm - 900 MPa Rm 1100 MPa
BS EN 3524:2007 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 2 mm a 6 mm - 1080 MPa Rm 1280 MPa
BS EN 3653:2010 Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, one lug, in steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C
BS EN 2680:2006 Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 °C
20/30423631 DC BS EN 4036. Aerospace Series. Rod ends, adjustable with self-aligning double row ball bearing and threaded shank in corrosion resisting steel, reduced internal radial clearance. Dimensions and loads
BS EN 4591:2005 Aerospace series - Nuts, barrel, self-locking, floating, self-aligning,in heat resisting nickel base alloy, MoS2 lubricated - Classification: 15 50 MPa (at ambient temperature) / 315 °C
19/30397747 DC BS EN 4036. Aerospace series. Rod ends, adjustable, with self-aligning double row ball bearing and threaded shank, in corrosion resisting steel, reduced internal radial clearance. Dimensions and loads
BS EN 4424:2006 Aerospace series - Rod-ends, adjustable single fork and threaded shank with engagement: 1,5 x thread diameter in titanium alloys - Dimensions and loads
19/30398513 DC BS EN 4157. Aerospace series. Rod end, with self-aligning double row ball bearing and threaded shank in steel. Dimensions and loads, Inch series
20/30427533 DC BS EN 4157. Aerospace series. Rod end, with self-aligning double row ball bearings and threaded shank in steel. Dimensions and loads, Inch series
BS EN 4639-005:2007 Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 005: Removable alignment sleeve holder - Product standard
BS EN 4036:2006 Rod ends, adjustable with self-aligning double row ball bearing and threaded shank in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads

Danish Standards Foundation, Research Aerospace

DS/EN 2601:1997 Aerospace series - Fork ends, adjustable - Technical specification
DS/EN 2587:1990 Aerospace series. Rod-ends, adjustable double fork and threaded shank. Dimensions and loads
DS/EN 2515:1990 Aerospace series. Rod ends, adjustable single fork and threaded shank. Dimensions and loads
DS/EN 2067:1996 Aerospace series - Rod ends with self-aligning ball bearings - Technical specification
DS/EN 3280:2011 Aerospace series - Bearings, airframe rolling, rigid or self-aligning - Technical specification
DS/EN 4425:2006 Aerospace series - Washers, tab in corrosion resisting steel for flight control rods - Dimensions
DS/EN 2068:1996 Aerospace series - Rod ends with self-lubricating self-aligning bearings - Technical specification
DS/EN 3053:1994 Aerospace series-Bearings,airframe rolling-Single row self-aligning roller bearings in steel-Dimensions and loads
DS/EN 2743:2002 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials
DS/EN 2498:1990 Aerospace series. Rod ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank. Dimensions and loads
DS/EN 2792:1991 Aerospace series. Rod ends, adjustable, double fork and threaded shank with engagement: 1,5 x thread . Dimensions and loads
DS/EN 3054:1994 Aerospace series-Bearings,airframe rolling-Single row self-aligning roller bearings in steel,cadmium plated-Dimensions and loads
DS/EN 3055:1994 Aerospace series-Bearings,airframe rolling-Single row self-aligning roller bearings in corrosion resisting steel-Dimensions and loads
DS/EN 2791:1991 Aerospace series. Rods ends, adjustable, single fork and threaded shank with engagement: 1,5 x thread . Dimensions and loads
DS/EN 3541:1992 Aerospace series. Rod ends, adjustable, self-aligning ball bearing with threaded shank. Dimensions,torques, clearances and loads
DS/EN 2290-1:1999 Aerospace series - Rod bodies, flight control in aluminium alloy, for adjustable end fittings - Part 1: Dimensions and loads
DS/EN 4036:2021 Aerospace series – Rod end, adjustable, with self-aligning double row ball bearing and threaded shank, in corrosion resisting steel, reduced internal radial clearance – Dimensions and loads
DS/EN 4424:2006 Aerospace series - Rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 x thread diameter in titanium alloys - Dimensions and loads
DS/EN 2017:2007 Bearings, airframe rolling, double row, self aligning ball bearings, in corrosion resisting steel, diameter series 2 - Dimensions and loads - Aerospace series
DS/EN 2020:2007 Bearings, airframe rolling, single row, self aligning roller bearings in corrosion resisting steel, diameter series 3 and 4 - Dimensions and loads - Aerospace series
DS/EN 4198:2006 Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads
DS/EN 2790:1991 Aerospace series. Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1,5 x thread . Dimensions and loads

Lithuanian Standards Office , Research Aerospace

LST EN 2601-2001 Aerospace series - Fork ends, adjustable - Technical specification
LST EN 2515-2001 Aerospace series - Rod ends, adjustable single fork and threaded shank - Dimensions and loads
LST EN 2587-2001 Aerospace series - Rod ends adjustable double fork and threaded shank - Dimensions and loads
LST EN 2067+AC-2001 Aerospace series - Rod ends with self-aligning ball bearings - Technical specification
LST EN 3280-2011 Aerospace series - Bearings, airframe rolling, rigid or self-aligning - Technical specification
LST EN 4425-2006 Aerospace series - Washers, tab in corrosion resisting steel for flight control rods - Dimensions
LST EN 2068+AC-2001 Aerospace series - Rod ends with self-lubricating self-aligning bearings - Technical specification
LST EN 2743-2002 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials
LST EN 3053-2002 Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in steel - Dimensions and loads
LST EN 3055-2002 Aerospace series - Bearings, airframe rolling - Single row self-aligining roller bearings in corrosion resisting steel - Dimensions and loads
LST EN 3054-2002 Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Dimensions and loads
LST EN 2792-2001 Aerospace series - Rod ends, adjustable, double fork and threaded shank with engagement: 1,5 x thread diameter - Dimensions and loads
LST EN 2791-2001 Aerospace series - Rod ends, adjustable, single fork and threaded shank with engagement: 1,5 x thread diameter - Dimensions and loads
LST EN 2015-2001 Bearings, airframe rolling, double row, self aligning ball bearings in steel, diameter series 2 - Dimensions and loads - Aerospace series
LST EN 3287-2001 Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 2 - Dimensions and loads
LST EN 3541-2001 Aerospace series - Rod ends, adjustable, self-aligning ball bearing with threaded shank - Dimensions, torques, clearances and loads
LST EN 2290-1-2001 Aerospace series - Rod bodies, flight control in aluminium alloy, for adjustable end fittings - Part 1: Dimensions and loads
LST EN 3289-2001 Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2 - Dimensions and loads
LST EN 3288-2001 Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2 - Dimensions and loads
LST EN 2018-2001 Bearings, airframe rolling, single row, self aligning roller bearings in steel, diameter series 3 and 4 - Dimensions and loads - Aerospace series
LST EN 2017-2001 Bearings, airframe rolling, double row, self aligning ball bearings, in corrosion resisting steel, diameter series 2 - Dimensions and loads - Aerospace series
LST EN 3290-2001 Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in steel - Diameter series 3 and 4 - Dimensions and loads
LST EN 2020-2001 Bearings, airframe rolling, single row, self aligning roller bearings in corrosion resisting steel, diameter series 3 and 4 - Dimensions and loads - Aerospace series
LST EN 3291-2001 Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Diameter series 3 and 4 - Dimensions and loads
LST EN 4424-2006 Aerospace series - Rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 × thread diameter in titanium alloys - Dimensions and loads
LST EN 3292-2001 Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4 - Dimensions and loads
LST EN 2498-2001 Aerospace series - Rod ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank - Dimensions and loads
LST EN 4198-2006 Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Research Aerospace

GB/T 29072-2012 Drafting rules of technical network for spacecraft development
GB/T 29073-2012 Drafting rules of schedule network for spacecraft development
GB/T 29073-2012(英文版) Drafting rules of schedule network for spacecraft development
GB/T 29072-2012(英文版) Drafting rules of technical network for spacecraft development
GB/T 42095-2022 Self-locking two lug anchor self-aligning floating nuts with MJ threads for aerospace

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Research Aerospace

PREN 3350-1991 Aerospace Series Aluminium@ Aluminium Alloys Temper Designations
PREN 2223-1977 Steel FE-PL32 Hardened and Tempered Bars Aerospace Series (Edition 1)
PREN 2031-1977 Steel FE-PL31 Hardened and Tempered Bars Aerospace Series (Edition 1)
PREN 2601-1990 Aerospace Series Fork Ends@ Adjustable Technical Specification (Issue P 1)
PREN 3350-1995 Aerospace Series Aluminium@ Aluminium Alloys Temper Designations (Edition P 2)
PREN 2225-1977 Steel FE-PL32 Hardened and Tempered Hand and Die Forgings Aerospace Series (Edition 1)
PREN 2222-1977 Steel FE-PL31 Hardened and Tempered Hand and Die Forgings Aerospace Series (Edition 1)
PREN 2920-2010 Aerospace series Steel FE-PL72 Carburized@ hardened and tempered Forgings De ≤ 160 mm (Edition P2)
PREN 2771-2010 Aerospace series Steel FE-PL53S Hardened and tempered 1100 ≤ Rm ≤ 1250 MPa Bar De ≤ 110 mm (Edition P2)
PREN 2743-1991 Aerospace Series Reinforced Plastics Standard Procedures for Conditioning Prior to Testing (Issue P 1)
PREN 3280-2010 Aerospace series Bearings@ airframe rolling@ rigid or self-aligning Technical specification (Edition P 2)
PREN 3492-1988 Aerospace Series Steel FE-PM44 Hardened and Tempered Bar for Machining De Less Than or Equal to 150 mm (Issue P 1)
PREN 2769-1988 Aerospace Series Steel FE-PL53S Hardened and Tempered 1030 Less Than or Equal to Rm Less Than or Equal to 1180 MPa Forgings De Less Than or Equal to 70 mm (Issue P 1)
PREN 2515-1989 Aerospace Series Rod Ends@ Adjustable Single Fork and Threaded Shank Dimensions and Loads
PREN 3541-1990 Aerospace Series Rod Ends@ Adjustable@ Self-Aligning Ball Bearing with Threaded Shank Dimensions@ Torques@ Clearances and Loads (Edition 1)
PREN 3280-1989 Aerospace Series Bearings@ Airframe Rolling Rigid or Self-Aligning Technical Specification (Issue P 1)
PREN 2587-1989 Aerospace Series Rod-Ends@ Adjustable Double Fork and Threaded Shank Dimensions and Loads
PREN 2030-2011 Aerospace series Steel FE-PM3501 (X105CrMo17) Hardened and tempered Bars De Less than or equal to 150 mm (Edition P 1)
PREN 3511-1988 Aerospace Series Steel FE-PL32 Hardened and Tempered Bar for Bearing D Less Than or Equal to 25 mm (Issue P 1)
PREN 2068-1989 Aerospace Series Rod-Ends with Self-Lubricating Self-Aligning Bearings Technical Specification (Issue P 1)
PREN 2445-2010 Aerospace series Steel FE-PL8201 (41NiCrMo2) Air melted Hardened and temperedForgings De ≤ 45 mm 900 MPa ≤ Rm ≤ 1100 Mpa (Edition P2)
PREN 2067-1989 Aerospace Series Rod-Ends with Self-Aligning Ball Bearings Technical Specification (Issue P 1)
PREN 2290-1998 Aerospace Series Rod Bodies Flight Control in Aluminium Alloys for Adjustable End Fittings Dimensions (Edition 2)
PREN 2792-1986 Aerospace Series Rod Ends@ Adjustable Double Fork and Threaded Shank Dimensions and Loads (Issue P 1)
PREN 3471-1988 Aerospace Series Steel FE-PA18 Quenched and Cold Drawn Strip for Spring a Less Than or Equal to 4@0 mm (Issue P 1)
PREN 2492-1980 Rod-Ends@ Self-Aligning Ball Bearing with Threaded Shank Dimensions and Loads Aerospace Series (Edition 1)
PREN 4630-2012 Aerospace series Steel X4CrNiMo16-5-1 (1.4418) Air melted Hardened and tempered Forgings De ≤ 200 mm 900 MPa ≤ Rm ≤ 1 050 MPa (Edition P 2)
PREN 2290-1981 Rod Bodies Flight Control in Aluminium Alloys for Adjustable End Fittings Dimensions Aerospace Series (Edition 1)
PREN 2791-1986 Aerospace Series Rod-Ends@ Adjustable Single Fork and Threaded Shank Dimensions and Loads (Issue P 1)
PREN 4627-2012 Aerospace series Steel X4CrNiMo16-5-1 (1.4418) Air melted Hardened and tempered Forgings De ≤ 200 mm 1 150 MPa ≤ Rm ≤ 1 300 MPa (Edition P 2)
PREN 3054-1987 Aerospace Series Bearings-Airframe Rolling Single Row Self-Aligning Roller Bearings in Steel Cadmium Plated Dimensions and Loads (Issue P 1)
PREN 2015-1982 Bearings-Airframe Rolling Double Row Self Aligning Ball Bearings in Steel Diameter Series 2 Dimensions and Loads Aerospace Series (Edition 3)
PREN 3055-1987 Aerospace Series Bearings-Airframe Rolling Single Row Self-Aligning Roller Bearings in Corrosion Resisting Steel Dimensions and Loads (Issue P 1)
PREN 3512-1988 Aerospace Series Steel FE-PL32 Hardened and Tempered Hollow Bars for Bearing 3@5 Less Than or Equal to a Less Than or Equal to 55 mm (Issue P 1)
PREN 4720-2012 Aerospace series Steel X4CrNiMo16-5-1 (1.4418) Air melted and electroslag remelted (ESR) Hardened and tempered Bar De ≤ 200 mm 1 150 MPa ≤ Rm ≤ 1 300 MPa (Edition P 1)
PREN 4721-2012 Aerospace series Steel X4CrNiMo16-5-1 (1.4418) Air melted and electroslag remelted (ESR) Hardened and tempered Bar De ≤ 200 mm 900 MPa ≤ Rm ≤ 1 050 MPa (Edition P 1)
PREN 2017-1982 Bearings-Airframe Rolling Double Row Self Aligning Ball Bearings in Corrosion Resisting Steel Diameter Series 2 Dimensions and Loads Aerospace Series (Edition 3)
PREN 2016-1982 Bearings Airframe Rolling Double Row Self Aligning Ball Bearings in Steel Cadmium Plated Diameter Series 2 Dimensions and Loads Aerospace Series (Edition 3)
PREN 2771-1988 Aerospace Series Steel FE-PL53S Hardened and Tempered 1100 Less Than or Equal to Rm Less Than or Equal to 1250 MPa Bar De Less Than or Equal to 110mm (Issue P 1)
PREN 2019-1982 Bearings-Airframe Rolling Single Row Self Aligning Roller Bearings in Steel Cadmium Plated Diameter Series 3 and 4 Dimensions and Loads Aerospace Series (Edition 3)
PREN 4157-1996 Aerospace Series Rod Ends@ with Self-Aligning Double Row Ball Bearings and Threaded Shank in Steel Dimensions and Loads Inch Series (Edition P 1)
PREN 3288-1987 Aerospace Series Bearings-Airframe Rolling Double Row@ Self-Aligning Ball Bearings in Steel@ Cadmium Plated Diameter Series 2 Dimensions@ Torques@ Clearances and Loads (Issue P 1)
PREN 4034-1993 Aerospace Series Bearings-Airframe Rolling Self-Aligning@ with Flanged Outer Ring in Corrosion Resisting Steel with Reduced Internal Radial Clearance Dimensions and Loads

Korean Agency for Technology and Standards (KATS), Research Aerospace

KS W 1712-2002(2018) Aerospace－Hardened and tempered low alloy steel bolts and screws
KS W ISO 14201-2004(2014) Aerospace－Airframe ball bearings, double-row,self-aligning, diameter series 2－Metric series
KS W ISO 14218-2004(2019) Aerospace－Airframe ball bearings, single-row,self-aligning, sealed, heavy duty－Inch series
KS W ISO 14216-2004(2019) Aerospace－Airframe ball bearings, double-row, self-aligning, sealed, heavy duty－Inch series
KS W ISO 14220-2004(2019) Aerospace－Airframe ball bearings, single-row, self-aligning, sealed, light duty－Inch series
KS W ISO 14220:2004 Aerospace－Airframe ball bearings, single-row, self-aligning, sealed, light duty－Inch series
KS W ISO 14218:2004 Aerospace－Airframe ball bearings, single-row,self-aligning, sealed, heavy duty－Inch series
KS W ISO 14216:2004 Aerospace－Airframe ball bearings, double-row, self-aligning, sealed, heavy duty－Inch series
KS W ISO 14219:2004 Aerospace-Airframe ball bearings, single-row, self-aligning,precision, sealed, heavy duty-Inch series
KS W ISO 14221:2004 Aerospace-Airframe ball bearings, single-row, self-aligning,precision, sealed, light duty-Inch series
KS W ISO 14217:2004 Aerospace－Airframe ball bearings, double-row, self-aligning,precision, sealed, heavy duty－Inch series
KS W ISO 14221-2004(2019) Aerospace－Airframe ball bearings, single-row, self-aligning,precision, sealed, light duty－Inch series
KS W ISO 14219-2004(2019) Aerospace－Airframe ball bearings, single-row, self-aligning,precision, sealed, heavy duty－Inch series
KS W ISO 14192-2004(2014) Aerospace－Airframe spherical roller bearings, single-row,self-aligning, shielded, intermediate duty－Metric series
KS W ISO 14197-2004(2019) Aerospace－Airframe spherical roller bearings, single-row,self-aligning, sealed, intermediate duty－Inch series
KS W ISO 14191-2004(2014) Aerospace－Airframe spherical roller bearings, single-row,self-aligning, diameter series 3 and 4－Metric series
KS W ISO 14196-2004(2019) Aerospace－Airframe spherical roller bearings, double-row, self-aligning, sealed, plain inner ring, heavy duty－Inch series
KS W ISO 14277:2005 Aerospace-Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives-Metric series
KS W ISO 14277:2016 Aerospace－Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives－Metric series
KS W ISO 14193-2004(2019) Aerospace－Airframe spherical roller bearings, single-row,self-aligning, sealed, extended inner ring,intermediate duty－Inch series
KS W ISO 14278:2005 Aerospace-Gauges, for internal offset cruciform ribbed or unribbed drives-Metric series
KS W ISO 14278:2016 Aerospace－Gauges, for internal offset cruciform ribbed or unribbed drives－Metric series
KS W ISO 7661:2009 Aerospace-Fluid systems-Clamp blocks for tube lines having axial alignment-Design standard and qualification testing-Metric series
KS W ISO 7661:2016 Aerospace－Fluid systems－Clamp blocks for tube lines having axial alignment－Design standard and qualification testing－Metric series

Professional Standard - Aerospace, Research Aerospace

QJ 1835.4-1990 The work content and requirements of the research and demonstration stage of the management method of the formulation and revision of aerospace industry standards
QJ 3098-1999 Regulations on Compilation of Aerospace Model Software Development Task Book
QJ 3155-2002 The compilatory regulation for adjustment process of space electronic product
QJ 2731.4-1995 Aerospace product quality and reliability information classification and codes Aerospace product development stage classification and codes
QJ 2936-1997 Basic requirements for review of unqualified products in the development process of aerospace products
QJ 2994.1-1997 Regulations on Compilation of Aerospace Fixed Assets Investment Project Report Regulations on Compilation of Feasibility Study Report

Military Standard of the People's Republic of China-General Armament Department, Research Aerospace

GJB 7064-2010 The integration test rules for space flight TT&C system
GJB 10090-2021 Missile aerospace test sea area survey requirements

AT-ON, Research Aerospace

ONORM EN 2601-1996 Aerospace series-Fork ends,adjustable-Technical specification
ONORM EN 3541-1992 Aerospace series - Rod ends, adjustable, self-ahgning ball bearing with threaded shank - Dimensions, torques, clearances and loads
ONORM EN 2791-1991 Aerospace series - Rod ends, adjustable, Single fork and threaded shank with engagement: 1,5 x thread 0 -Dimensions and loads
OENORM EN 4157-2020 Aerospace series - Rod end, with self-aligning double row ball bearings and threaded shank in steel - Dimensions and loads, Inch series
ONORM EN 2792-1991 Aerospace series - Rod ends, adjustable, double fork and threaded shank with engagement: 1,5xthread0-Dimensions and loads
ONORM EN 2790-1991 Aerospace series - Rod ends, adjustable, self-alignlng piain bearing with self-lubricating liner and threaded shank with engagement: 1,5 x thread? - Dimensions and loads

ABMA - American Bearing Manufacturers Association, Research Aerospace

14197-1998 Aerospace - Airframe Spherical Roller Bearings@Single-Row@ Self-Aligning@ Sealed@ Intermediate Duty - Inch Series
14192-1998 Aerospace - Airframe spherical roller bearings@ single row@ self-aligning@ shielded@ intermediate duty - Metric series
14191-1998 Aerospace - Airframe Spherical Roller Bearings@ Single-Row@ Self-Aligning@ Diameter Series 3 and 4 - Metric Series
14196-1998 Aerospace - Airframe spherical roller bearings@ double row@ self-aligning@ sealed@ plain inner ring@ heavy duty - Inch series
14195-1998 Aerospace - Airframe spherical roller bearings@ double row@ self-aligning@ sealed@ torque tube design@ light duty - Inch series
14190-1998 Aerospace - Airframe Rolling Bearings: Ball and Spherical Roller Bearings - Technical Specification
14193-1998 Aerospace - Airframe spherical roller bearings@ single row@ self-aligning@ sealed@ extended inner ring@ intermediate duty - Inch series
14220-1998 Aerospace - Airframe ball bearings@ single row@ self-aligning@ sealed@ light duty - Inch series
14218-1998 Aerospace - Airframe Ball Bearings@ Single-Row@ Self-Aligning@ Sealed@ Heavy Duty - Inch Series
14216-1998 Aerospace - Airframe Ball Bearings@ Double-Row@ Self-Aligning@ Sealed@ Heavy Duty - Inch Series
14217-1998 Aerospace - Airframe Ball Bearings@ Double-Row@ Self-Aligning@ Perecision@ Sealed@ Heavy Duty - Inch Series
14201-1998 Aerospace - Airframe ball bearings@ double row@ self-aligning@ diameter series 2 - Metric series
14219-1998 Aerospace - Airframe Ball Bearings@ Single-Row@ Self-Aligning@ Perecision@ Sealed@ Heavy Duty - Inch Series
14221-1998 Aerospace - Airframe ball bearings@ single row@ self-aligning@ precision@ sealed@ light duty - Inch series
14194-1998 Aerospace - Airframe spherical roller bearings@ double row@ self-aligning@ extended inner ring@ sealed@ extended inner ring@ heavy duty - Inch series

American Bearing Manufacturers Association, Research Aerospace

ABMA 14197-1998 Aerospace - Airframe Spherical Roller Bearings,Single-Row, Self-Aligning, Sealed, Intermediate Duty - Inch Series
ABMA 14190-1998 Aerospace - Airframe Rolling Bearings: Ball and Spherical Roller Bearings - Technical Specification
ABMA 14217-1998 Aerospace - Airframe Ball Bearings, Double-Row, Self-Aligning, Perecision, Sealed, Heavy Duty - Inch Series
ABMA 14219-1998 Aerospace - Airframe Ball Bearings, Single-Row, Self-Aligning, Perecision, Sealed, Heavy Duty - Inch Series
ABMA 14220-1998 Aerospace - Airframe ball bearings, single row, self-aligning, sealed, light duty - Inch series
ABMA 14221-1998 Aerospace - Airframe ball bearings, single row, self-aligning, precision, sealed, light duty - Inch series
ABMA 14218-1997 Aerospace - Airframe Ball Bearings, Single-Row, Self-Aligning, Sealed, Heavy Duty - Inch Series ISO 14218
ABMA 14216-1997 Aerospace - Airframe Ball Bearings, Double-Row, Self-Aligning, Sealed, Heavy Duty - Inch Series ISO 14216; 1997
ABMA 14217-1997 Aerospace - Airframe Ball Bearings, Double-Row, Self-Aligning, Perecision, Sealed, Heavy Duty - Inch Series ISO 14217; 1997
ABMA 14219-1997 Aerospace - Airframe Ball Bearings, Single-Row, Self-Aligning, Perecision, Sealed, Heavy Duty - Inch Series ISO 14219; 1997

Aerospace, Security and Defence Industries Association of Europe (ASD), Research Aerospace

ASD-STAN PREN 2601-1990 Aerospace Series Fork Ends, Adjustable Technical Specification (Issue P 1)
ASD-STAN PREN 2067-1989 Aerospace Series Rod-Ends with Self-Aligning Ball Bearings Technical Specification (Issue P 1)
ASD-STAN PREN 4721-2012 Aerospace series Steel X4CrNiMo16-5-1 (1.4418) Air melted and electroslag remelted (ESR) Hardened and tempered Bar De ≤ 200 mm 900 MPa ≤ Rm ≤ 1 050 MPa (Edition P 1)
ASD-STAN PREN 2068-1989 Aerospace Series Rod-Ends with Self-Lubricating Self-Aligning Bearings Technical Specification (Issue P 1)
ASD-STAN PREN 2587-1989 Aerospace Series Rod-Ends, Adjustable Double Fork and Threaded Shank Dimensions and Loads
ASD-STAN PREN 3280-2010 Aerospace series Bearings, airframe rolling, rigid or self-aligning Technical specification (Edition P 2)
ASD-STAN PREN 3541-1990 Aerospace Series Rod Ends, Adjustable, Self-Aligning Ball Bearing with Threaded Shank Dimensions, Torques, Clearances and Loads (Edition 1)
ASD-STAN PREN 2515-1989 Aerospace Series Rod Ends, Adjustable Single Fork and Threaded Shank Dimensions and Loads
ASD-STAN PREN 2030-2011 Aerospace series Steel FE-PM3501 (X105CrMo17) Hardened and tempered Bars De Less than or equal to 150 mm (Edition P 1)
ASD-STAN PREN 2492-1980 Rod-Ends, Self-Aligning Ball Bearing with Threaded Shank Dimensions and Loads Aerospace Series (Edition 1)
ASD-STAN PREN 2790-1986 Aerospace Series Rod-Ends, Adjustable Self-Aligning Plain Bearing with Self-Lubricating Liner and Threaded Shank Dimensions and Loads (Issue P 1)
ASD-STAN PREN 2290-1998 Aerospace Series Rod Bodies Flight Control in Aluminium Alloys for Adjustable End Fittings Dimensions (Edition 2)
ASD-STAN PREN 2791-1986 Aerospace Series Rod-Ends, Adjustable Single Fork and Threaded Shank Dimensions and Loads (Issue P 1)
ASD-STAN PREN 2792-1986 Aerospace Series Rod Ends, Adjustable Double Fork and Threaded Shank Dimensions and Loads (Issue P 1)
ASD-STAN PREN 4198-1998 Aerospace Series Rod-Ends, Adjustable Self-Aligning Plain Bearing with Self-Lubricating Liner and Thread Shank in Corrosion Resisting Steel Dimensions and Loads (Edition P 1)
ASD-STAN PREN 3727-2001 Aerospace Series Bearings, Airframe Rolling Rigid with Flanged Alignment Housing Dimensions and Loads (Edition P 2)
ASD-STAN PREN 2015-1982 Bearings-Airframe Rolling Double Row Self Aligning Ball Bearings in Steel Diameter Series 2 Dimensions and Loads Aerospace Series (Edition 3)
ASD-STAN PREN 4036-1996 Areospace Series Rod Ends, Adjustble with Self-Aligning Double Row Ball Bearing and Threaded Shank in Corrosion Resisting Steel, Reduced Internal Radial Clearance Dimensions and Loads (Edition P 1)
ASD-STAN PREN 3054-1987 Aerospace Series Bearings-Airframe Rolling Single Row Self-Aligning Roller Bearings in Steel Cadmium Plated Dimensions and Loads (Issue P 1)
ASD-STAN PREN 3055-1987 Aerospace Series Bearings-Airframe Rolling Single Row Self-Aligning Roller Bearings in Corrosion Resisting Steel Dimensions and Loads (Issue P 1)
ASD-STAN PREN 2016-1982 Bearings Airframe Rolling Double Row Self Aligning Ball Bearings in Steel Cadmium Plated Diameter Series 2 Dimensions and Loads Aerospace Series (Edition 3)
ASD-STAN PREN 2017-1982 Bearings-Airframe Rolling Double Row Self Aligning Ball Bearings in Corrosion Resisting Steel Diameter Series 2 Dimensions and Loads Aerospace Series (Edition 3)
ASD-STAN PREN 2019-1982 Bearings-Airframe Rolling Single Row Self Aligning Roller Bearings in Steel Cadmium Plated Diameter Series 3 and 4 Dimensions and Loads Aerospace Series (Edition 3)
ASD-STAN PREN 4157-1996 Aerospace Series Rod Ends, with Self-Aligning Double Row Ball Bearings and Threaded Shank in Steel Dimensions and Loads Inch Series (Edition P 1)
ASD-STAN PREN 4035-1996 Aerospace Series Rod Ends, Adjustable with Self-Aligning Double Row Ball Bearing in Corrosion Resisting Steel, Reduced Internal Radial Clearance and Threaded Shank in Titanium Alloy Dimension and Loads (Edition P 1)
ASD-STAN PREN 4351-1997 Aerospace Series Rod Ends, with Self-Aligning Double Row Ball Bearings and Threaded Shank in Corrosion Resisting Steel Dimensions and Loads Inch Series (Edition P 1)

Association of German Mechanical Engineers, Research Aerospace

DVS 2703-1975 Electron-beam welding in aeronautics and space navigation; survey of methods and machinery

GB-REG, Research Aerospace

REG NASA-LLIS-1154--2000 Lessons Learned - Aerospace Technology/Cancellation of Research and Development (R&D) Programs/Impact to Aviation Safety
REG NASA-LLIS-6344-2012 Space Shuttle Program Integration, Planning, Scheduling and Tracking
REG NASA-LLIS-0625-1998 Lessons Learned ?Lewis Spacecraft Mission Failure Investigation Board
REG NASA-LLIS-0963-1995 Lessons Learned ?Space Shuttle Main Engine (SSME): Start Sequence Investigations
REG NASA-LLIS-1441--2003 Lessons Learned - Accident Investigations/Aerospace Safety Advisory Panel (ASAP)/National Transportation and Safety Board (NTSB) Roles in Investigation

US-MSFC, Research Aerospace

MSFC NASA MWI 5000.1 REV H-2008 PROCESSING NASA RESEARCH ANNOUNCEMENTS (NRAs) AND COOPERATIVE AGREEMENT NOTICES (CANs)

SAE - SAE International, Research Aerospace

SAE AS7116/2A-2008 National Aerospace and Defense Contractors Accreditation Program Requirements for Electrochemical Grinding (ECG)
SAE AS7100/1A-1993 National Aerospace and Defense Contractors Accreditation Program (NADCAP) Survey Checklists for the NDT Suppliers Accreditation Program
SAE AS7100/1B-2008 National Aerospace and Defense Contractors Accreditation Program (NADCAP) Survey Checklists for the NDT Suppliers Accreditation Program

International Telecommunication Union (ITU), Research Aerospace

ITU-R SA.509-2-1998 Generalized Space Research Earth Station and Radio Astronomy Antenna Radiation Pattern for Use in Interference Calculations Including Coordination Procedures
ITU-R SA.509-3-2013 Space research earth station and radio astronomy reference antenna radiation pattern for use in interference calculations, including coordination procedures, for frequencies less than 30 GHz
ITU-R SA.509-2 FRENCH-1998 Generalized Space Research Earth Station and Radio Astronomy Antenna Radiation Pattern for Use in Interference Calculations Including Coordination Procedures
ITU-R SA.509-2 SPANISH-1998 Generalized Space Research Earth Station and Radio Astronomy Antenna Radiation Pattern for Use in Interference Calculations Including Coordination Procedures
ITU-R SA.509-2013 Space research earth station and radio astronomy reference antenna radiation pattern for use in interference calculations, including coordination procedures, for frequencies less than 30 GHz
ITU-R F.699-7-2006 Reference radiation patterns for fixed wireless system antennas for use in coordination studies and interference assessment in the frequency range from 100 MHz to about 70 GHz

International Organization for Standardization (ISO), Research Aerospace

ISO 10784-3:2011 Space systems - Early operations - Part 3: Commissioning report
ISO 14085-2:2015 Aerospace series - Hydraulic filter elements - Test methods - Part 2: Conditioning
ISO 14218:1998 Aerospace - Airframe ball bearings, single-row, self-aligning, sealed, heavy duty - Inch series
ISO 14220:1998 Aerospace - Airframe ball bearings, single-row, self-aligning, sealed, light duty - Inch series
ISO 14216:1998 Aerospace - Airframe ball bearings, double-row, self-aligning, sealed, heavy duty - Inch series
ISO 14219:1998 Aerospace - Airframe ball bearings, single-row, self-aligning, precision, sealed, heavy duty - Inch series
ISO 14221:1998 Aerospace - Airframe ball bearings, single-row, self-aligning, precision, sealed, light duty - Inch series
ISO 14217:1998 Aerospace - Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty - Inch series
ISO 14277:2002 Aerospace - Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives - Metric series
ISO 10784-1:2011 Space systems - Early operations - Part 1: Spacecraft initialization and commissioning
ISO 14278:2002 Aerospace - Gauges, for internal offset cruciform ribbed or unribbed drives - Metric series
ISO 7661:1984 Aerospace; Fluid systems; Clamp blocks for tube lines having axial alignment; Design standard and qualification testing; Metric series

SE-SIS, Research Aerospace

SIS SS-EN 2515-1991 Aerospace series — Rod-ends, adjustable single fork and threadedshank — Dimensions and loads
SIS SS-EN 2587-1991 Aerospace series — Rod-ends, adjustable doublefork and threaded shank — Dimensions and loads
SIS SS-EN 2498-1991 Aerospace series — Rod-ends, ad/ustable, self-aligning, plain bearing with self-lubricating liner and threaded shank — Dimensions and loads
SIS SS-EN 2792-1991 Aerospace series — Rod ends, adjustable, double fork and threadedshank with engagement: 1,5 x thread diameter — Dimensions and loads
SIS SS-EN 2791-1991 Aerospace series — Rodends, adjustable, single fork and threadedshank with engagement: 1,5 x thread diameter — Dimensions and loads
SIS SS-EN 2790-1991 Aerospace series — Rodends, adjustable, self-aligning plain bearing with self-lubricating liner and threadedshank with engagement: 1,5 x thread diameter — Dimensions and loads

ES-UNE, Research Aerospace

UNE-EN 2607:2005 Aerospace series - O-rings for adaptors, threaded, with lockring - Survey (Endorsed by AENOR in March of 2006.)
UNE-EN 3280:2011 Aerospace series - Bearings, airframe rolling, rigid or self-aligning - Technical specification (Endorsed by AENOR in June of 2011.)
UNE-EN 4198:2006 Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads (Endorsed by AENOR in November of 2006.)
UNE-EN 2743:2001 Aerospace series- Fibre reinforced plastics- Standard procedures for conditioning prior to testing unaged materials. (Endorsed by AENOR in February of 2002.)
UNE-EN 4035:2021 Aerospace series - Rod end, adjustable, with self-aligning double row ball bearing, in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy - Dimensions and loads (Endorsed by Asociación Española de Normal...
UNE-EN 4036:2021 Aerospace series - Rod end, adjustable, with self-aligning double row ball bearing and threaded shank, in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads (Endorsed by Asociación Española de Normalización in April ...
UNE-EN 4424:2006 Aerospace series - Rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 × thread diameter in titanium alloys - Dimensions and loads (Endorsed by AENOR in November of 2006.)

US-CFR-file, Research Aerospace

CFR 14-406.9-2014 Aeronautics and space. Part406:Investigations, enforcement, and administrative review.SubpartA:Investigations and Enforcement. Section406.9:Civil penalties.
CFR 14-16.29-2013 Aeronautics and Space. Part16:Rules of practice for federally-assisted airport enforcement proceedings. Section16.29:Investigations.
CFR 14-16.31-2013 Aeronautics and Space. Part16:Rules of practice for federally-assisted airport enforcement proceedings. Section16.31:Director's Determinations after investigations.
CFR 14-121.415-2013 Aeronautics and space. Part121:Operating requirements: domestic, flag, and supplemental operations. Section121.415:Crewmember and dispatcher training requirements.
CFR 14-121.418-2013 Aeronautics and space. Part121:Operating requirements: domestic, flag, and supplemental operations. Section121.418:Differences training: crewmembers and dispatchers.

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Research Aerospace

GJB 1198.5A-2004 Telemetry tracking command and data handling for spacecraft Part 5:Radio frequency and modulation

American National Standards Institute （ANSI), Research Aerospace

ANSI/ABMA/ISO 14216:1998 Aerospace - Airframe Ball Bearings, Double Row, Self-Aligning, Sealed, Heavy Duty - Inch Series
ANSI/ABMA/ISO 14220:1998 Aerospace - Airframe ball bearings, single row, self-aligning, sealed, light duty - Inch series
ANSI/ABMA/ISO 14218:1998 Aerospace - Airframe Ball Bearings, Single Row, Self-Aligning, Sealed, Heavy Duty - Inch Series
ANSI/ABMA/ISO 14201:1998 Aerospace - Airframe ball bearings, double row, self-aligning, diameter series 2 - Metric series
ANSI/ABMA/ISO 14192:1998 Aerospace - Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty - Metric series
ANSI/ABMA/ISO 14217:1998 Aerospace - Airframe Ball Bearings, Double Row, Self-Aligning, Precision, Sealed, Heavy Duty - Inch Series
ANSI/ABMA/ISO 14221:1998 Aerospace - Airframe ball bearings, single row, self-aligning, precision, sealed, light duty - Inch series
ANSI/ABMA/ISO 14219:1998 Aerospace - Airframe ball bearings, single row, self-aligning, precision, sealed, heavy duty - Inch series
ANSI/ABMA/ISO 14197:1998 Aerospace - Airframe spherical roller bearings, single row, self-aligning, sealed, intermediate duty - Inch series
ANSI/ABMA/ISO 14191:1998 Aerospace - Airframe Spherical Roller Bearings, Single Row, Self-Aligning, Diameter Series 3 and 4 - Metric Series
ANSI/ABMA/ISO 14196:1998 Aerospace - Airframe spherical roller bearings, double row, self-aligning, sealed, plain inner ring, heavy duty - Inch series
ANSI/ABMA/ISO 14194:1998 Aerospace - Airframe spherical roller bearings, double row, self-aligning, extended inner ring, sealed, extended inner ring, heavy duty - Inch series
ANSI/ABMA/ISO 14193:1998 Aerospace - Airframe spherical roller bearings, single row, self-aligning, sealed, extended inner ring, intermediate duty - Inch series
ANSI/ABMA/ISO 14195:1998 Aerospace - Airframe spherical roller bearings, double row, self-aligning, sealed, torque tube design, light duty - Inch series

BE-NBN, Research Aerospace

NBN-EN 2515-1993 Aerospace series. Rod ends, adjustable single fork and threaded shank. Dimensions and loads
NBN-EN 2587-1993 Aerospace series. Rod ends, adjustable double fork and threaded shank. Dimensions and loads
NBN-EN 2498-1993 Aerospace series. Rod ends, adjustable self-aligning plan bearing with self-lubricating liner and threaded shank. Dimensions and loads
NBN-EN 3541-1992 Aerospace series - Rod ends, adjustable, self-aligning ball bearing with threaded shank - Dimensions, torques, clearances and loads
NBN-EN 3287-1994 Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 0 and 2 - Dimensions and loads
NBN-EN 3288-1994 Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2 - Dimensions and loads
NBN-EN 2791-1993 Aerospace series. Rod ends, adjustable, single fork and threaded shank with engagement: 1,5 x thread phi. Dimensions and loads
NBN-EN 2792-1993 Aerospace series. Rod ends, adjustable, double fork and threaded shank with engagement: 1,5 x thread phi. Dimensions and loads
NBN-EN 2790-1993 Aerospace series. Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1,5 x thread phi. Dimensions and loads

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Research Aerospace

ITU-R SA.509-1-1990 Generalized Space Research Earth Station Antenna Radiation Pattern for Use in Interference Calculations@ Including Coordination Procedures - Section 2A - Research in Space Technology
ITU-R F.699-8-2018 Reference radiation patterns for fixed wireless system antennas for use in coordination studies and interference assessment in the frequency range from 100 MHz to 86 GHz

Japanese Industrial Standards Committee (JISC), Research Aerospace

JIS Q 9100 ERRATUM 1:2001 Quality systems -- Aerospace -- Model for quality assurance in design, development, production, installation and servicing (Erratum 1)

National Aeronautics and Space Administration (NASA), Research Aerospace

NASA NPD 1400.2 REV B-2008 Publishing NASA Documents in the Federal Register and Responding to Regulatory Actions

Consultative Committee for Space Data Systems (CCSDS), Research Aerospace

CCSDS 401.0-B-21-2011 Radio frequency and modulation systems - Part 1: Earth stations and spacecraft
CCSDS 401.0-B-22-2013 Radio Frequency and Modulation Systems - Part 1: Earth Stations and Spacecraft
CCSDS 401.0-B-2013 Radio frequency and modulation systems - Part 1: Earth stations and spacecraft
CCSDS 401.0-B-31-2021 Radio Frequency and Modulation Systems - Part 1: Earth Stations and Spacecraft
CCSDS 401.0-B-21 Technical Corrigendum 1-2012 Radio frequency and modulation systems - Part 1: Earth stations and spacecraft; Technical Corrigendum 1

GOSTR, Research Aerospace

GOST R 58125-2018 Space systems. System of technical support of space hardware development and production. Organization and operation of technological preparation of production