ZH
RU
ES

Determination of resistivity in water

Determination of resistivity in water, Total:500 items.

In the international standard classification, Determination of resistivity in water involves: Paint ingredients, Acoustics and acoustic measurements, Construction materials, Fuels, Raw materials for rubber and plastics, Plastics, Conducting materials, Non-ferrous metals, Materials for the reinforcement of composites, Rubber, Paints and varnishes, Water quality, Printed circuits and boards, Power transmission and distribution networks, Electricity. Magnetism. Electrical and magnetic measurements, Insulating materials, Textile fibres, Pipeline components and pipelines, Semiconducting materials, Environmental protection, Fertilizers, Protection against fire, Road vehicles in general, Testing of metals, Analytical chemistry, Organic chemicals, Powder metallurgy, Galvanic cells and batteries, Electrical engineering in general, Resistors, Electronic display devices, Company organization and management, Products of non-ferrous metals, Test conditions and procedures in general, Surface treatment and coating, Inorganic chemicals, Products of the chemical industry, Rubber and plastics products, Electrical equipment for working in special conditions, Paper and board, Hydraulic construction, Products of the textile industry, Non-metalliferous minerals, Wastes, Burners. Boilers, Paper products, Welding, brazing and soldering, Electrical and electronic testing, Pulps, Insulating fluids, Farming and forestry, Geology. Meteorology. Hydrology, Measurement of fluid flow, Crude petroleum, Electric road vehicles, Natural gas, Ceramics, Earthworks. Excavations. Foundation construction. Underground works, Soil quality. Pedology, Power stations in general, Particle size analysis. Sieving, Refractories, Waxes, bituminous materials and other petroleum products, Coals, Microbiology, Components and accessories for telecommunications equipment, Lubricants, industrial oils and related products, Packaging and distribution of goods in general, Adhesives.


German Institute for Standardization, Determination of resistivity in water

  • DIN 53779:1979 Determination of the electric conductivity and the specific resistance (resistivity) of aqueous extracts
  • DIN 52326:1986 Testing of glass; determination of electrical resistivity
  • DIN EN ISO 15091:2020-05 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2019); German version EN ISO 15091:2020
  • DIN EN 27888:1993 Water quality; determination of electrical conductivity (ISO 7888:1985); German version EN 27888:1993
  • DIN EN ISO 15091:2020 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2019)
  • DIN EN 12390-19:2023-07 Testing of hardened concrete - Part 19: Determination of electrical resistivity; German version EN 12390-19:2023
  • DIN EN ISO 787-14:2019-06 General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract (ISO 787-14:2019); German version EN ISO 787-14:2019
  • DIN EN 27888:1993-11 Water quality; determination of electrical conductivity (ISO 7888:1985); German version EN 27888:1993
  • DIN EN 14617-13:2013-06 Agglomerated stone - Test methods - Part 13: Determination of electrical resistivity; German version EN 14617-13:2013
  • DIN 51919:2013-05 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method - Solid materials
  • DIN EN 60195:2017-02 Method of measurement of current noise generated in fixed resistors (IEC 60195:2016); German version EN 60195:2016
  • DIN 51911:2020 Testing of carbonaceous materials - Determination of specific electrical resistance by the current-voltage method - Solid materials
  • DIN EN ISO 8031:2020-11 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2020); German version EN ISO 8031:2020
  • DIN 51919:2013 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method - Solid materials
  • DIN 51919:1999 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method; solid materials
  • DIN EN 60115-9:2004-10 Fixed resistors for use in electronic equipment - Part 9: Sectional specification - Fixed surface mount resistor networks with individually measurable resistors (IEC 60115-9:2003); German version EN 60115-9:2004
  • DIN EN ISO 787-14:2019 General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract (ISO 787-14:2019)
  • DIN EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity (IEC 62631-3-2:2015); German version EN 62631-3-2:2016
  • DIN EN 61340-2-3:2000 Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation (IEC 61340-2-3:2000); German version EN 61340-2-3:2000
  • DIN 53114:1990 Paper, board and pulps; determination of conductivity of aqueous extracts; modified version of ISO 6587:1980
  • DIN EN ISO 8031:2010 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009); German version EN ISO 8031:2009
  • DIN EN 62631-3-2 Berichtigung 1:2018 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity (IEC 62631-3-2:2015); German version EN 62631-3-2:2016; Corrigendum 1
  • DIN EN 62631-3-1 Berichtigung 1:2018 Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method (IEC 62631-3-1:2016); German version EN 62631-3-1:2016; Corrigendu
  • DIN EN 62631-3-1:2017 Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method (IEC 62631-3-1:2016); German version EN 62631-3-1:2016
  • DIN EN 60115-9-1:2004-10 Fixed resistors for use in electronic equipment - Part 9-1: Blank detail specification - Fixed surface mount resistor networks with individually measurable resistors - Assessment level EZ (IEC 60115-9-1:2003); German version EN 60115-9-1:2004
  • DIN EN 14617-13:2013 Agglomerated stone - Test methods - Part 13: Determination of electrical resistivity; German version EN 14617-13:2013
  • DIN EN ISO 15091:2011 Paints and varnishes - Determination of the electrical conductivity and the specific electrical resistivity (ISO/DIS 15091:2011); German version prEN ISO 15091:2011
  • DIN EN 61340-2-3:2017 Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation (IEC 61340-2-3:2016); German version EN 61340-2-3:2016
  • DIN EN ISO 787-14:2002 General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract (ISO 787-14:2002); German version EN ISO 787-14:2002
  • DIN EN ISO 8031:2020 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2020); German version EN ISO 8031:2020
  • DIN EN ISO 11733:2004 Water quality - Determination of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test (ISO 11733:2004); German version EN ISO 11733:2004
  • DIN CEN/TS 17481:2020-10 Bitumen and bituminous binders - Determination of salt content in bitumen - Electrical conductivity method; German version CEN/TS 17481:2020
  • DIN 50448:1998 Testing of materials for semiconductor technology - Contactless determination of the electrical resistivity of semi-insulating semi-conductor slices using a capacitive probe
  • DIN 51432:1992 Testing of used oils; determination of the percentage of water, solvents and the distillation residue in used oil; distillation method
  • DIN EN ISO 5135:2020-12 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation test room (ISO 5135:2020); German version EN ISO 5135:2020

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Determination of resistivity in water

  • GB/T 5211.12-1986 Determination of resistivity of the aqueous extract of pigments
  • GB/T 5211.12-2007 Determination of resistivity of aqueous extract pigmtnts
  • GB/T 11446.4-1997 Test methods for resistivity of electronic grade water
  • GB/T 11446.4-2013 Test method for resistivity of electronic grade water
  • GB/T 3781.9-1993 Acetylene black. Determination of resistivity
  • GB/T 1692-2008 Vulcanized rubber.Determination of the insulation resistivity
  • GB/T 1672-1988 Liquid plasticizers--Determination of volume resistivity
  • GB/T 3781.9-2006 Acetylene black.Part 9:Determination of resistivity
  • GB/T 11718.5-1989 Medium density fiberboard--Determination of moisture content
  • GB/T 5167-1985 Sintered metal materials and hardmetals--Determination of electrical resistivity
  • GB 5167-1985 Sintered metal materials and hardmetals－Determination of electrical resistivity
  • GB/T 13580.3-1992 Determination of specific conductance in the wet precipitation
  • GB 13580.3-1992 Method for Determination of Conductivity of Atmospheric Precipitation Water
  • GB/T 17035-1997 Fixed resistors for use in electronic equipment. Part 4: Blank detail specification. Fixed power resistors, heat-sink types. Assessment level H
  • GB/T 11718.6-1989 Medium density fiberboard--Determination of thickness swelling rate of water absorption
  • GB/T 6908-2018 Analysis of water used in boiler and cooling system.Determination of electrical conductivity
  • GB/T 6908-2008 Analysis of water used in boil and cooling system.Determination of electrical conductivity
  • GB/T 6908-1986 Methods for analysis of water for boiler and for cooling--The determination of electrical conductivity for water
  • GB/T 6908-2005 Analysis of water used in boil and cooling system-The determination of electrical conductivity for water
  • GB/T 12147-1989 Analysis of water used in boiler and cooling system--Determination of electrical conductivity of pure water
  • GB/T 7976-1987 Insulating paper and board--Determination of the electrical conductivity for the water extract
  • GB/T 2915-2013 Determination of conductivity of water extract of polyvinyl chloride resins
  • GB/T 41880-2022 Plastics—Epoxy resins—Determination of electrical conductivity of aqueous resin extracts
  • GB/T 7977-1987 Paper board and pulps--Determination of the electrical conductivity for the water extract
  • GB/T 7977-2007 Paper,board and pulps.Determination of conductivity of aqueous extracts
  • GB/T 2915-1999 Determination of conductivity of water extract of poly(vinyl chloride) Resins
  • GB/T 2439-2001 Conducting and dissipative rubbers,vulcanized or thermoplastic--Measurement of resistivity
  • GB 12277-1990 Fixed resistors for electronic equipment Part 7: Blank detail specification: Evaluation level E of fixed resistor networks for which each resistor cannot be measured individually (available for certification)
  • GB/T 12277-1990 Fixed resistors for use in electronic equipment--Part 7:Blank detail specification--Fixed resistor networks in which not all resistors are individually measurable--Assessment level E
  • GB 7339-1987 Fixed resistors for electronic equipment Part 6: Blank detail specification: Evaluation level E of fixed resistor networks with the same resistance value and power consumption, each resistor can be measured separately (available for certification)
  • GB 7340-1987 Fixed Resistors for Electronic Equipment Part VI: Blank Detailed Specification Evaluation Level E of Fixed Resistor Networks with Different Resistance Value and Power Dissipation, Each Resistor Can Be Measured Separately (for Certification)
  • GB/T 27896-2011 Test method for water vapor content of natural gas using.Electronic moisture analyzers
  • GB/T 15893.2-1995 Industrial circulating cooling water--Determination of pH--Electrometric method
  • GB/T 12476.9-2010 Electrical apparatus for use in the presence of combustible dust.Part 9:Test methods.Methods for determining the electrical resistivity of dust in layers
  • GB 12476.9-2010 Electrical apparatus for use in the presence of combustible dust.Part 9:Test methods.Methods for determining the electrical resistivity of dust in layers
  • GB/T 21529-2008 Determination of water vapour transmission rate for plastic film and sheeting.Electrolytic detection sensor method

NL-NEN, Determination of resistivity in water

  • NEN 5774-1990 Soil - Determination of resistivity using the electromagnetic resistivity method
  • NEN 5773-1990 Soil - Determination of resistivity using the electrical sounding method
  • NEN-ISO 7888:1994 Water quality.Determination of electrical conductivity(ISO 7888:1985)

SE-SIS, Determination of resistivity in water

ES-AENOR, Determination of resistivity in water

PL-PKN, Determination of resistivity in water

  • PN P04871-1991 Textiles. Determination of the electrical resistivity
  • PN P50159-1992 Paper and board. Determination of water absorption after immersion in water
  • PN C82055-21-1992 Test methods of pressed carbon products Determination of resistivity on electrodes
  • PN-EN ISO 8031-2021-01 E Rubber and plastics hoses and hose assemblies -- Determination of electrical resistance and conductivity (ISO 8031:2020)
  • PN C82055-08-1990 Test methods of pressed carbon products Determination of resistivity on samples
  • PN E05203-1992 Protection against static electricity. Materials and products for use in explosive atmospheres. Methods of tests for electrical resistivity and leakage resistance
  • PN C04566 ArkusZ04-1974 Walter and waste water Test for su?phur and its compounds Deteriminajtion ol um-ionized hydrogein sulphlide
  • PN C04611 ArkusZ04-1972 Water and waste water Tests for copper Determination of copper in boilers water flow cirkuits at thermal power stations by colorimetric method with sodium diethyldithiocarbamate Rang?: 0,001÷1,0 rag/l

Japanese Industrial Standards Committee (JISC), Determination of resistivity in water

  • JIS A 1405:1998 Acoustics -- Determination of sound absorption coefficient and impedance in impedance tubes -- Method using standing wave ratio
  • JIS R 7609:2007 Carbon fibre -- Determination of volume resistivity
  • JIS K 0400-13-10:1999 Water quality -- Determination of electrical conductivity
  • JIS H 0612:1975 Testing methods of resistivity for single crystal silicon wafers with four point probe
  • JIS C 2139-3-1:2018 Dielectric and resistive properties of solid insulating materials -- Part 3-1: Determination of resistive properties (DC methods) -- Volume resistance and volume resistivity
  • JIS C 2139-3-2:2018 Dielectric and resistive properties of solid insulating materials -- Part 3-2: Determination of resistive properties (DC methods) -- Surface resistance and surface resistivity
  • JIS C 2170:2004 Electrostatics -- Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation
  • JIS K 7194:1994 Testing method for resistivity of conductive plastics with a four-point probe array
  • JIS K 6271-1:2015 Rubber, vulcanized or thermoplastic -- Determination of resistivity -- Part 1: Guarded-electrode system
  • JIS K 6271:2008 Rubber, vulcanized or thermoplastic -- Determination of volume and surface resistivity
  • JIS Z 3930:2001 Determination of emission rate of particulate fume in arc welding
  • JIS K 6271-2:2015 Rubber, vulcanized or thermoplastic -- Determination of resistivity -- Part 2: Parallel terminal electrode system
  • JIS K 6271-1:2022 Rubber, vulcanized or thermoplastic -- Determination of resistivity -- Part 1: Guarded-electrode system
  • JIS R 1637:1998 Test method for resistivity of conductive fine ceramic thin films with a four-point probe array

IT-UNI, Determination of resistivity in water

UNKNOWN, Determination of resistivity in water

Professional Standard - Ferrous Metallurgy, Determination of resistivity in water

  • YB/T 035-1992 Determination method of electrical resistivity of coke

Malaysia Standards, Determination of resistivity in water

  • MS 1465 Pt.1-1999 Method of test for determination of plastics resistivity: Part 1: surface resistivity
  • MS 1465 Pt.2-1999 Method of test for determination of plastics resistivity: Part 2: volume resistivity

European Committee for Standardization (CEN), Determination of resistivity in water

  • EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)
  • EN ISO 3915:1999 Plastics - Measurement of Resistivity of Conductive Plastics
  • prEN 12390-19-2021 Testing of hardened concrete - Part 19: Determination of resistivity
  • EN ISO 8031:2020 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2020)
  • EN ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
  • EN 27888:1993 Water quality; determination of electrical conductivity (ISO 7888:1985)
  • EN 14617-13:2013 Agglomerated stone - Test methods - Part 13: Determination of electrical resistivity
  • EN 14701-2:2013 Characterisation of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration
  • EN ISO 787-14:2002 General Methods of Test for Pigments - Part 14: Determination of Resistivity of Aqueous Extract ISO 787-14: 2002
  • EN ISO 11733:1998 Water Quality - Evaluation of the Elimination and Biodegradability of Organic Compounds in an Aqueous Medium - Activated Sludge Simulation Test ISO 11733:1995
  • CEN/TS 17481:2020 Bitumen and bituminous binders - Determination of salt content in bitumen - Electrical conductivity method
  • EN 12736:2001 Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level

Korean Agency for Technology and Standards (KATS), Determination of resistivity in water

  • KS M ISO 3915-2002(2017) Plastics－Measurement of resistivity of conductive plastics
  • KS D 0240-2010 Measuring methods for electrical resistivity and conductivity of non-ferrous metals
  • KS L ISO 13931:2018 Carbon fibre — Determination of volume resistivity
  • KS I ISO 7888:2007 Water quality－Determination of electrical conductivity
  • KS I ISO 7888-2007(2017) Water quality－Determination of electrical conductivity
  • KS I 3210-2016(2021) Testing methods for specific resistivity recoverycharacteristic of water filtered by membranes
  • KS C IEC 62631-3-2:2017 Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
  • KS C IEC 62631-3-2-2017(2022) Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
  • KS M ISO 787-14:2012 General methods of test for pigments and extenders－Part 14：Determination of resistivity of aqueous extract
  • KS M ISO 787-14:2022 General methods of test for pigments and extenders — Part 14: Determination of resistivity of aqueous extract
  • KS C IEC 62631-3-4:2020 Dielectric and resistive properties of solid insulating materials —Part 3-4: Determination of resistive properties(DC methods) —Volume resistance and volume resistivity at elevated temperatures
  • KS M ISO 787-14-2012(2017) General methods of test for pigments and extenders－Part 14：Determination of resistivity of aqueous extract
  • KS C IEC 62631-3-1-2017(2022) Dielectric and resistive properties of solid insulating materials — Part 3—1: Determination of resistive properties (DC methods) — Volume resistance and volume resistivity — General method
  • KS C IEC 62631-3-1:2017 Dielectric and resistive properties of solid insulating materials — Part 3—1: Determination of resistive properties (DC methods) — Volume resistance and volume resistivity — General method
  • KS M ISO 8031:2019 Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and conductivity
  • KS C IEC 62631-3-11:2021 Dielectric and resistive properties of solid insulating materials —Part 3-11: Determination of resistive properties(DC methods) —Volume resistance and volume resistivity — Method for impregnation and
  • KS C IEC 61340-2-3:2004 Electrostatics-Part 2-3:Methods of test for determining the resistance and resistivity of solid planer materials used to avoid electrostatic charge accumulation
  • KS C IEC 61340-2-3:2014 Electrostatics－Part 2－3：Methods of test for determining the resistance and resistivity of solid planer materials used to avoid electrostatic charge accumulation
  • KS I ISO 5135:2020 Acoustics — Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
  • KS M ISO 10143-2004(2019) Carbonaceous materials for the production of aluminium－Calcined coke for electrodes－Determination of the electrical resistivity of granules
  • KS C IEC 61340-2-3-2014(2020) Electrostatics－Part 2－3：Methods of test for determining the resistance and resistivity of solid planer materials used to avoid electrostatic charge accumulation
  • KS M ISO 10143:2004 Carbonaceous materials for the production of aluminium－Calcined coke for electrodes－Determination of the electrical resistivity of granules
  • KS C 5115-62-2001(2011) Fixed resistors for use in electronic equipment－Part 6：Blank detail specification: Fixed resistor networks withindividually measurable resistors, of either different resistancevalues or different rate
  • KS M ISO 6587:2018 Paper, board and pulps — Determination of conductivity of aqueous extracts
  • KS C IEC 60115-9-1:2006 Fixed resistors for use in electronic equipment-Part 9-1:Blank detail specification-Fixed surface mount resistor networks with individually measurable resistors-Assessment level EZ
  • KS C 5115-61-2001(2011) Fixed resistors for use in electronic equipment－Part 6：Blank detail specification：Fixed resistor networks with individually measurable resistors, all of equal value and equal dissipation Assessment le
  • KS C IEC 60115-9-1:2013 Fixed resistors for use in electronic equipment－Part 9－1：Blank detail specification－Fixed surface mount resistor networks with individually measurable resistors－Assessment level EZ
  • KS C IEC 60115-9-1-2006(2011) Fixed resistors for use in electronic equipment－Part 9－1：Blank detail specification－Fixed surface mount resistor networks with individually measurable resistors－Assessment level EZ
  • KS C 5115-62-2001 Fixed resistors for use in electronic equipment-Part 6:Blank detail specification: Fixed resistor networks withindividually measurable resistors, of either different resistancevalues or different rated dissipations Assessment level E
  • KS M ISO 11713-2004(2009) Carbonaceous materials used in the production of aluminium－Cathode blocks and baked anodes－Determination of electrical resistivity at ambient temperature
  • KS M ISO 5636-5:2004 Paper and board-Determination of air permeance and air resistance(medium range)-Part 5:Gurley method
  • KS C 5115-61-2001 Fixed resistors for use in electronic equipment-Part 6:Blank detail specification:Fixed resistor networks with individually measurable resistors, all of equal value and equal dissipation Assessment level E
  • KS L ISO 8894-1:2022 Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire methods(cross-array and resistance thermometer)
  • KS L ISO 8894-1:2016 Refractory materials-Determination of thermal coductivity-Part 1:Hot-wire methods(cross-array and resistance thermometer
  • KS C 2136-1996 Testing methods for complex permittivity (Dielectric constant) of solid electrical insulating materials at high frequencies and high temperatures
  • KS I ISO 11733:2008 Water quality－Determination of the elimination and biodegradability of organic compounds in an aqueous medium－Activated sludge simulation test
  • KS C IEC 60754-2:2019 Test on gases evolved during combustion of materials from cables — Part 2: Determination of acidity(by pH measurement) and conductivity
  • KS C 5115-6101-2001 Fixed resistors for use in electronic equipment-Part 6:Detail specification:Fixed thick film resistor networks with individually measurable resistors, all of equal value and equal dissipation, class 1(dual-in-line network)
  • KS C 5115-6102-2001 Fixed resistors for use in electronic equipment-Part 6:Detail specification:Fixed thick film resistor networks with individually measurable resistors, all of equal value and equal dissipation, class 1 (single-in-line network)
  • KS D 0062-2019 The method for measuring total and elemental fume generation rate on arc welding process

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Determination of resistivity in water

  • GB/T 32993-2016 Determination of volume resistivity of carbon fiber
  • GB/T 33328-2016 Paints and varnishes—Determination of electrical conductivity and resistance
  • GB/T 34698-2017 Rubber compounding ingredients—Determination of water soluble substance of silica，precipitated，hydrated—Electrolytic conductivity method

KR-KS, Determination of resistivity in water

  • KS L ISO 13931-2018 Carbon fibre — Determination of volume resistivity
  • KS M 1810-2008(2023) Analysis method for determination of lead and cadmium in resistance
  • KS C IEC 62631-3-2-2017 Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
  • KS M ISO 787-14-2022 General methods of test for pigments and extenders — Part 14: Determination of resistivity of aqueous extract
  • KS C IEC 62631-3-4-2020 Dielectric and resistive properties of solid insulating materials —Part 3-4: Determination of resistive properties(DC methods) —Volume resistance and volume resistivity at elevated temperatures
  • KS C IEC 62631-3-1-2017 Dielectric and resistive properties of solid insulating materials — Part 3—1: Determination of resistive properties (DC methods) — Volume resistance and volume resistivity — General method
  • KS M ISO 8031-2019 Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and conductivity
  • KS C IEC 62631-3-11-2021 Dielectric and resistive properties of solid insulating materials —Part 3-11: Determination of resistive properties(DC methods) —Volume resistance and volume resistivity — Method for impregnation and
  • KS I ISO 5135-2020 Acoustics — Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
  • KS M ISO 6587-2018 Paper, board and pulps — Determination of conductivity of aqueous extracts
  • KS M ISO 10336-2008(2023) Crude petroleum－Determination of water－Potentiometric Karl Fischer titration method
  • KS L ISO 8894-1-2022 Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire methods(cross-array and resistance thermometer)
  • KS C IEC 60754-2-2019 Test on gases evolved during combustion of materials from cables — Part 2: Determination of acidity(by pH measurement) and conductivity

American Society for Testing and Materials (ASTM), Determination of resistivity in water

  • ASTM D2448-85(2007) Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment
  • ASTM D2448-85(2002) Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment
  • ASTM D2448-85(1996)e1 Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment
  • ASTM D2448-85(2012) Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment
  • ASTM D5391-14 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
  • ASTM F1896-10 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
  • ASTM D4496-21 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
  • ASTM F76-08(2016) Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
  • ASTM F1896-98(2004) Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
  • ASTM F1896-16 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
  • ASTM F1896-98 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
  • ASTM E895-89(2001) Standard Practice for Determination of Hydrolysis Rate Constants of Organic Chemicals in Aqueous Solutions
  • ASTM E895-89(1995) Standard Practice for Determination of Hydrolysis Rate Constants of Organic Chemicals in Aqueous Solutions
  • ASTM D5391-99 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
  • ASTM D5391-99(2005) Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
  • ASTM D7148-19 Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
  • ASTM D7148-19a Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
  • ASTM D6504-11(2016)e1 Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water
  • ASTM F397-93(1999) Standard Test Method for Resistivity of Silicon Bars Using a Two-Point Probe
  • ASTM D7148-13 Standard Test Method for Determining the Ionic Resistivity 40;ER41; of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
  • ASTM D6034-20 Standard Practice for (Analytical Procedure) Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
  • ASTM D2448-85(2019) Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment
  • ASTM E895-89(2008) Standard Practice for Determination of Hydrolysis Rate Constants of Organic Chemicals in Aqueous Solutions
  • ASTM D4949-94 Standard Test Method for Determination of D-C Resistivity of Writing Paper (Keithley Method)
  • ASTM D4949-94(2002) Standard Test Method for Determination of D-C Resistivity of Writing Paper (Keithley Method)
  • ASTM F76-08(2016)e1 Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
  • ASTM UOP481-10 Water in Liquid Hydrocarbons by Coulometry
  • ASTM D5912-20 Standard Practice for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)
  • ASTM F673-90(1996)e1 Standard Test Methods for Measuring Resistivity of Semiconductor Slices or Sheet Resistance of Semiconductor Films with a Noncontact Eddy-Current Gage
  • ASTM D6097-01a Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
  • ASTM D6097-97a Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
  • ASTM D6097-01 Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
  • ASTM D7677-11 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water
  • ASTM D7677-16 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water
  • ASTM E1698-95(2005) Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography
  • ASTM D5912-96(2004) Standard Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)
  • ASTM D5912-96e1 Standard Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)
  • ASTM D6442-05 Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water
  • ASTM D6442-06 Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water
  • ASTM D6442-06(2012) Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water
  • ASTM C1113/C1113M-09(2019) Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
  • ASTM D6442-03 Standard Test Method for Determination of Copper Release Rate From Antifouling Coating Systems in Artificial Seawater
  • ASTM D5855/D5855M-20 Standard Practice for (Analytical Procedure) Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well
  • ASTM E1698-95(2010) Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography
  • ASTM D4104/D4104M-20 Standard Practice for (Analytical Procedures) Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)
  • ASTM D6903-07(2013) Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water

TR-TSE, Determination of resistivity in water

  • TS 2734-1977 Conducting Ind Intistatic Rubbers - Measurement Of Resistivity
  • TS 2613-1977 General Methods of Test For Pipents PartXIV Determination of Resistivity of flpeons Extract
  • TS 3624-1981 TEST METHOD FOR DETERMINING THE SPECIFIC GRAVITY, THE ABSORBTION WATER AND THE VOID RATIO IN HARDENED CONCRETE

未注明发布机构, Determination of resistivity in water

  • BS EN 12390-19:2023 Testing of hardened concrete — Determination of electrical resistivity
  • BS EN 61241-2-2:1996(1999) Electrical apparatus for use in the presence of combustible dust — Part 2 : Test methods — Section 2.2 Method for determining the electrical resistivity of dust in layers

VN-TCVN, Determination of resistivity in water

  • TCVN 5050-1990 Hardmetals.Method of determination of resistivity
  • TCVN 6826-2009 Water quality.Determination of the elimination and biodegradability of organic compounds in an aqueous medium.Activated sludge simulation test

International Organization for Standardization (ISO), Determination of resistivity in water

  • ISO 2951:1974 Vulcanized rubber; Determination of insulation resistance
  • ISO 15091:2019 Paints and varnishes — Determination of electrical conductivity and resistance
  • ISO 7888:1985 Water quality; Determination of electrical conductivity
  • ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
  • ISO 787-14:2019 General methods of test for pigments and extenders — Part 14: Determination of resistivity of aqueous extract
  • ISO 787-14:2002 General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract
  • ISO 8031:2020 Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and conductivity
  • ISO 5637:1978 Paper and board — Determination of water absorption and increase in thickness after immersion in water
  • ISO 10143:2014 Carbonaceous materials for the production of aluminium - Calcined coke for electrodes - Determination of the electrical resistivity of granules
  • ISO 10143:1995 Carbonaceous materials for the production of aluminium - Calcined coke for electrodes - Determination of the electrical resistivity of granules
  • ISO/CD 11713:2023 Carbonaceous materials used in the production of aluminium — Cathode blocks and baked anodes — Determination of electrical resistivity at ambient temperature
  • ISO 14309:2019 Rubber, vulcanized or thermoplastic — Determination of volume and/or surface resistivity
  • ISO 18066:2015 Textiles - Manmade filament yarns - Determination of shrinkage in boiling water
  • ISO 10143:2019 Carbonaceous materials for the production of aluminium — Calcined coke for electrodes — Determination of the electrical resistivity of granules
  • ISO 5135:2020 Acoustics — Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation test room
  • ISO 14309:2011 Rubber, vulcanized or thermoplastic - Determination of volume and/or surface resistivity
  • ISO 6587:1980 Paper, board and pulps — Determination of conductivity of aqueous extracts
  • ISO 5636-5:2003 Paper and board - Determination of air permeance and air resistance (medium range) - Part 5: Gurley method
  • ISO 5636-5:2013 Paper and board.Determination of air permeance (medium range).Part 5: Gurley method
  • ISO 11713:2000 Carbonaceous materials used in the production of aluminium - Cathode blocks and baked anodes - Determination of electrical resistivity at ambient temperature
  • ISO 18696:2006/cor 1:2009 Textiles - Determination of resistance to water absorption - Tumble-jar absorption test; Technical Corrigendum 1
  • ISO 787-14:1973 General method of test for pigments - Parts XIV: Determination of resistivity of aqueous extract
  • ISO 11733:2004 Water quality - Determination of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test

IN-BIS, Determination of resistivity in water

Danish Standards Foundation, Determination of resistivity in water

  • DS/EN ISO 15091:2013 Paints and varnishes - Determination of electrical conductivity and resistance
  • DS/EN 27888:2003 Water quality - Determination of electrical conductivity (ISO 7888:1985)
  • DS/EN 14617-13:2013 Agglomerated stone - Test methods - Part 13: Determination of electrical resistivity
  • DS/EN ISO 787-14:2002 General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract
  • DS/EN ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
  • DS/EN 61340-2-3:2001 Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation
  • DS/IEC 115-2-1:1987 International Electrotechnical Commission IEC Publication No. 115-2-1 First edition 1982 Fixed resistors for use in electronic equipment Part 2: Blank detail specification: Fixed low- power non-wirewound resistors Assessment level E

Association Francaise de Normalisation, Determination of resistivity in water

  • NF T30-005*NF EN ISO 15091:2020 Paints and varnishes - Determination of electrical conductivity and resistance
  • NF EN ISO 15091:2020 Peintures et vernis - Détermination de la conductivité et de la résistance électriques
  • NF T90-031*NF EN 27888:1994 Water quality - Determination of electrical conductivity.
  • NF EN 27888:1994 Qualité de l'eau - Détermination de la conductivité électrique
  • NF EN ISO 787-14:2019 Méthodes générales d'essai des pigments et matières de charge - Partie 14 : détermination de la résistivité de l'extrait aqueux
  • NF EN 14617-13:2013 Pierre agglomérée - Méthodes d'essai - Partie 13 : détermination de la résistivité électrique
  • NF T47-135:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity.
  • NF C26-631-3-2*NF EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2 : determination of resistive properties (DC Methods) - Surface resistance and surface resistivity
  • NF EN 61340-2-3:2017 Électrostatique - Partie 2-3 : méthodes d'essais pour la détermination de la résistance et de la résistivité des matériaux solides destinés à éviter les charges électrostatiques
  • NF EN ISO 8031:2020 Tuyaux et flexibles en caoutchouc et en plastique - Détermination de la résistance et de la conductivité électriques
  • NF EN 12390-19:2023 Essais pour béton durci - Partie 19 : détermination de la résistivité électrique
  • NF EN 62631-3-2:2016 Propriétés diélectriques et résistives des matériaux isolants solides - Partie 3-2 : détermination des propriétés résistives (Méthodes en courant continu) - Résistance superficielle et résistivité superficielle
  • NF T31-245:2003 General methods of test for pigments and extenders - Part 14 : determination of resistivity of aqueous extract.
  • NF C26-631-3-4*NF EN IEC 62631-3-4:2019 Dielectric and resistive properties of solid insulating materials - Part 3-4 : determination of resistive properties (DC methods) - Volume resistance and volume resistivity at elevated temperatures
  • NF EN IEC 62631-3-1:2023 Propriétés diélectriques et résistives des matériaux isolants solides - Partie 3-1 : détermination des propriétés résistives (méthodes en courant continu) - Résistance volumique et résistivité volumique - Méthode générale
  • NF B10-602-13:2005 Agglomerated stone - Test methods - Part 13 : determination of electrical resistivity.
  • NF B10-602-13*NF EN 14617-13:2013 Agglomerated stone - Test methods - Part 13 : determination of electrical resistivity
  • NF C93-195*NF EN 60195:2017 Method of measurement of current noise generated in fixed resistors
  • NF C26-631-3-1*NF EN 62631-3-1:2016 Dielectric and resistive properties of solid insulating materials - Part 3-1 : determination of resistive properties (DC Methods) - Volume resistance and volume resistivity - General method
  • NF T47-135*NF EN ISO 8031:2020 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
  • NF C26-631-3-11*NF EN IEC 62631-3-11:2018 Dielectric and resistive properties of solid insulating materials - Part 3-11 : determination of resistive properties (DC methods) - Volume resistance and volume resistivity - Method for impregnation and coating materials
  • NF C20-790-2-3*NF EN 61340-2-3:2017 Electrostatics - Part 2-3 : methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
  • NF C20-790-2-3:2001 Electrostatics - Part 2-3 : methods of test for determining the resistance and reisistivity of solid planar materials used to avoid electrostatic charge accumulation.
  • NF EN 60115-9:2005 Résistances fixes utilisées dans les équipements électroniques - Partie 9 : spécification intermédiaire - Réseaux de résistances fixes montés en surface avec des résistances mesurables individuellement
  • NF T51-731:1980 Plastics. Plasticized vinyl compounds. Determination of the volume resistivity at low voltage.
  • NF C93-266-9-1*NF EN 60115-9-1:2005 Fixed resistors for use in electronic equipment - Part 9-1 : blank detail specification - Fixed surface mount resistor networks with individually measurable resistors - Assessment level EZ.
  • NF T90-111:1975 Water testing - Estimate of dissolved salt content from the determination of theoretical electrical conductivity
  • NF EN ISO 11275:2014 Qualité du sol - Détermination de la conductivité hydraulique en milieu non saturé et de la caractéristique de rétention en eau - Méthode par évaporation de Wind
  • NF EN 60115-9-1:2005 Résistances fixes utilisées dans les équipements électroniques - Partie 9-1 : spécification particulière cadre - Réseaux de résistances fixes montés en surface avec des résistances mesurables individuellement - Niveau d'assurance EZ
  • NF EN ISO 5135:2020 Acoustique - Détermination des niveaux de puissance acoustique du bruit émis par les bouches d'air, les unités terminales, les registres et clapets au moyen de mesurages en salle réverbérante
  • NF X11-670:1989 Particle size analysis in an electrolytic suspension using a resistance variation counter.
  • NF P30-311:2014 Fixations pour travaux de couverture - Détermination de la résistance caractéristique d'assemblage - Plaques profilées de fibres-ciment
  • XP T66-083*XP CEN/TS 17481:2020 Bitumen and bituminous binders - Determination of salt content in bitumen - Electrical conductivity method
  • NF EN 14970:2006 Textiles - Étoffes à mailles - Détermination de la longueur de fil absorbée et de la masse linéique du fil dans les tricots à mailles cueillies
  • NF T90-323*NF EN ISO 11733:2004 Water quality - Determination of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test.
  • NF X10-323:1990 Mesure de débit des liquides dans les canaux découverts - Détermination de la correction de câble immergé

ES-UNE, Determination of resistivity in water

  • UNE-EN ISO 15091:2020 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2019)
  • UNE-EN 12390-19:2023 Testing of hardened concrete - Part 19: Determination of electrical resistivity
  • UNE-EN ISO 787-14:2020 General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract (ISO 787-14:2019)
  • UNE-EN 60115-2:2015 Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Leaded fixed low power film resistors (Endorsed by AENOR in March of 2015.)
  • UNE-EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity (Endorsed by AENOR in April of 2016.)
  • UNE-EN 60195:2016 Method of measurement of current noise generated in fixed resistors (Endorsed by AENOR in August of 2016.)
  • UNE-EN ISO 8031:2021 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2020)
  • UNE-EN 62631-3-1:2016 Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method (Endorsed by AENOR in August of 2016.)
  • UNE-EN 61340-2-3:2016 Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation (Endorsed by AENOR in November of 2016.)
  • UNE-EN 60115-9:2004 Fixed resistors for use in electronic equipment -- Part 9: Sectional specification - Fixed surface mount resistor networks with individually measurable resistors (Endorsed by AENOR in May of 2004.)
  • UNE-ISO 6587:2008 ERRATUM:2008 Paper, board and pulps. Determination of conductivity of aqueous extracts.
  • UNE-EN 60115-9-1:2004 Fixed resistors for use in electronic equipment -- Part 9-1: Blank detail specification - Fixed surface mount resistor networks with individually measurable resistors - Assessment level EZ (Endorsed by AENOR in May of 2004.)
  • UNE-EN ISO 5135:2021 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation test room (ISO 5135:2020)

AASHTO - American Association of State Highway and Transportation Officials, Determination of resistivity in water

  • TP 119-2015 Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test
  • T 288-1991 Standard Method of Test for Determining Minimum Laboratory Soil Resistivity
  • T 288-2012 Standard Method of Test for Determining Minimum Laboratory Soil Resistivity
  • T288-1991 Standard Method of Test for Determining Minimum Laboratory Soil Resistivity (Nineteenth Edition)

The American Road & Transportation Builders Association, Determination of resistivity in water

  • AASHTO TP 119-2015 Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test
  • AASHTO TP 119-2021 Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test
  • AASHTO T 288-1991 Standard Method of Test for Determining Minimum Laboratory Soil Resistivity

CZ-CSN, Determination of resistivity in water

  • CSN 42 0892 Cast.7-1984 Testing of sintered carbides. Determination of specific electric resistance
  • CSN 06 0212-1989 Flat solar collectors for heating of li-quids. Determination of power effici-ency and hydraulic resistence
  • CSN 34 6412-1985 Testing methods of electrical insulating materials.Determination of resistance of electrical materials against moulds measured by surface electrical resistivity
  • CSN 83 0520 Cast.25-1976 Physico-chemical analysis of drinking water. Determination of specific eleetrolytical conductivity
  • CSN 83 0530 Cast.10-1978 Chemical and physinal analysis of surface water. Determination oí specific alectrolytical conductiiiity
  • CSN 72 6023-1970 Measurement oí distance insulation resistance of shaped refractory pro- ducts at raised temperatures
  • CSN 42 0890 Cast.8-1981 Testing of metal powders. Determination of water content in metal powders by elektrometric titration

RU-GOST R, Determination of resistivity in water

  • GOST R ISO 13931-2015 Carbon fibre. Methods for determination of volume resistivity
  • GOST 22227-1988 Man-made fiber and tow. Method of determination for electric resistance
  • GOST R 53311-2009 Coatings cables fire retardant. Methods for determination of fireproof efficiency
  • GOST 12119.7-1998 Electrical steel. Methods of test for magnetic and electrical properties. Method for measurement of specific electric resistance by d.c. bridge
  • GOST 29029-1991 Fixed resistors for use in electronic equipment. Part 4. Blank detail specification. Fixed power resistors. Assessment level E
  • GOST 28106-1989 Copper cathodes. Sampling and preparation of samples and test pieces for determination of electrical resistivity
  • GOST 9.514-1999 Unified system of corrosion and ageing protection. Corrosion inhibitors of metals for water systems. Electrochemical method pretective ability evaluation
  • GOST 29068-1991 Fixed resistors for use in electronic equipment. Part 6. Blank detail specification: fixed resistor networks with individually measurable resistors, all of equal value and equal dissipation. Assessment level E
  • GOST 29043-1991 Fixed resistors for use in electronic equipment. Part 6. Blank detail specification: fixed resistor networks with individually measurable resistors, of either different resistance values or different rated dissipations. Assessment level E
  • GOST R 53734.2.3-2010 Electrostatics. Part 2.3. Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation
  • GOST 32411-2013 Commercial explosives. Methods of determination of electric copacitance, density and resistance to water emulsions
  • GOST R ISO 10143-2016 Carbonaceous materials for the production of aluminium. Calcined coke for electrodes. Determination of the electrical resistivity of granules
  • GOST 29070-1991 Fixed resistors for use in electronic equipment. Part 7. Blank detail specification: fixed resistor networks in which not all resistors are individually measurable. Assessment level E
  • GOST R 57166-2016 Water. Determination of toxicity by survival rate of freshwater infusoria Paramecium caudatum Ehrenberg
  • GOST 32509-2013 Surface-active agents. Method for determination of biodegradability rate in aquatic environment
  • GOST R 57163-2016 Water. Determination of toxicity by survival rate of one - day young fish Poecilia reticulata Peters in fresh and marine water
  • GOST R IEC 61241-2-2-1999 Electrical apparatus for use in the presence of combustible dust. Part 2. Test methods. Section 2. Method for determining the electrical resistivity of dust in layers
  • GOST R 54467-2011 Thick building materials and products of high and medium thermal resistance. Methods for determination of thermal resistance by means of guarded hot plate and heat flow meter
  • GOST R ISO 11713-2014 Carbonaceous materials used in the production of aluminium. Cathode blocks and baked anodes. Determination of electrical resistivity at ambient temperature
  • GOST 12175-1990 Common test methods insulating and sheathing materials of electric cables. Methods for determining the density. Water absorption and shrinkage tests

国家市场监督管理总局、中国国家标准化管理委员会, Determination of resistivity in water

  • GB/T 3781.9-2019 Acetylene black—Part 9：Determination of resistivity
  • GB/T 5167-2018 Sintered metal materials and hardmetals—Determination of electrical resistivity
  • GB/T 40719-2021 Rubber,vulcanized or thermoplastic—Determination of volume and/or surface resistivity
  • GB/T 1551-2021 Test method for measuring resistivity of monocrystal silicon—In-line four-point probe and direct current two-point probe method
  • GB/T 27896-2018 Test method for water vapor content of natural gas—Electronic moisture analyzers

British Standards Institution (BSI), Determination of resistivity in water

  • BS EN 14617-13:2006 Agglomerated stone - Test methods - Determination of electrical resistivity
  • BS EN 14617-13:2013 Agglomerated stone. Test methods. Determination of electrical resistivity
  • BS EN ISO 787-14:2002 General methods of test for pigments and extenders - Determination of resistivity of aqueous extract
  • BS EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials. Determination of resistive properties (DC Methods). Surface resistance and surface resistivity
  • BS EN ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
  • BS EN 27888:1993 Water quality. Method for the determination of electrical conductivity
  • BS EN ISO 787-14:2019 Tracked Changes. General methods of test for pigments and extenders. Determination of resistivity of aqueous extract
  • BS EN IEC 62631-3-4:2019 Dielectric and resistive properties of solid insulating materials - Determination of resistive properties (DC methods). Volume resistance and volume resistivity at elevated temperatures
  • BS EN 62631-3-1:2016 Dielectric and resistive properties of solid insulating materials. Determination of resistive properties (DC methods). Volume resistance and volume resistivity. General method
  • BS EN 61340-2-3:2016 Tracked Changes. Electrostatics. Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
  • BS EN 61340-2-3:2000 Electrostatics. Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation. Section 3: Methods of test for determining the resistance and resistivity of solid planar materials u
  • BS EN IEC 62631-3-1:2023 Tracked Changes. Dielectric and resistive properties of solid insulating materials. Determination of resistive properties (DC methods). Volume resistance and volume resistivity. General method
  • BS EN IEC 62631-3-11:2018 Dielectric and resistive properties of solid insulating materials - Determination of resistive properties (DC methods). Volume resistance and volume resistivity. Method for impregnation and coating materials
  • 21/30440241 DC BS EN 12390-19. Testing of hardened concrete. Part 19. Determination of resistivity
  • BS EN ISO 8031:2020 Rubber and plastics hoses and hose assemblies. Determination of electrical resistance and conductivity
  • BS ISO 14309:2011 Rubber, vulcanized or thermoplastic. Determination of volume and/or surface resistivity
  • BS QC 400203:1993 Specification for fixed resistors for use in electronic equipment. Blank detail specification. Fixed power resistors, heat-sink types. Assessment level H
  • BS ISO 5636-5:2013 Paper and board. Determination of air permeance (medium range). Gurley method
  • 19/30371735 DC BS EN IEC 62631-3-1. Dielectric and resistive properties of solid insulating materials. Part 3-1. Determination of resistive properties (DC methods). Volume resistance and volume resistivity. General method
  • BS ISO 10143:2014 Carbonaceous materials for the production of aluminium. Calcined coke for electrodes. Determination of the electrical resistivity of granules
  • 21/30434324 DC BS EN IEC 62631-3-12. Dielectric and resistive properties of solid insulating materials. Part 3-12. Determination of resistive properties (DC Methods). Volume resistance and volume resistivity, method for casting resins
  • BS 6043-3.6:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature
  • BS ISO 10143:2019 Tracked Changes. Carbonaceous materials for the production of aluminium. Calcined coke for electrodes. Determination of the electrical resistivity of granules
  • BS EN 60811-302:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Electrical tests. Measurement of the d.c. resistivity at 23 $0dC and 100 °C of filling compounds
  • BS EN 25814:1992 Method for determination of dissolved oxygen in water: electrochemical probe method
  • BS 9940-05.00:1985 Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Sectional specification: fixed resistor networks in which not all resistors are individually measurable
  • BS EN 12736:2002 Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level
  • BS EN 12736:2001(2002) Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level
  • 21/30425928 DC BS ISO 6587. Paper, board and pulps. Determination of conductivity of aqueous extracts
  • BS ISO 14309:2019 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of volume and/or surface resistivity
  • BS ISO 6587:2021 Tracked Changes. Paper, board and pulps. Determination of conductivity of aqueous extracts
  • BS EN 60754-2:2014+A1:2020 Test on gases evolved during combustion of materials from cables - Determination of acidity (by pH measurement) and conductivity
  • PD CEN/TS 17481:2020 Bitumen and bituminous binders. Determination of salt content in bitumen. Electrical conductivity method
  • BS EN ISO 15106-3:2005 Plastics - Film and sheeting - Determinaktion of water vapour transmission rate - Electrolytic detection sensor method
  • BS EN 62037-4:2012 Passive RF and microwave devices, intermodulation level measurement. Measurement of passive intermodulation in coaxial cables
  • BS 9940-05.01:1985 Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Blank detail specification: fixed resistor networks in which not all resistors are individually measurable. Assessment level E
  • BS ISO 21760-2:2019 Adhesives for organic electronic devices. Determination of water vapour transmission rate - Edge seal methods

BE-NBN, Determination of resistivity in water

  • NBN T 21-304-1982 General methods of test for pigments and extenders - Determination of resistivity of aqueous extract
  • NBN-EN ISO 2812-2:1995 Paints and varnishes - Determination of resistance to liquids - Part 2 : Water immersion method (ISO 2812-2:1993)

ZA-SANS, Determination of resistivity in water

  • SANS 10198-5:2004 The selection, handling and installation of electric power cables of rating not exceeding 33 kV Part 5: Determination of thermal and electrical resistivity of soil

AENOR, Determination of resistivity in water

  • UNE-EN ISO 15091:2013 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012)
  • UNE 20534:1974 MEASUREMENT OF CURRENT NOISE GENERATED IN FIXED RESISTORS
  • UNE-EN 27888:1994 WATER QUALITY. DETERMINATION OF ELECTRICAL CONDUCTIVITY. (ISO 7888:1985).
  • UNE-EN 14617-13:2013 Agglomerated stone - Test methods - Part 13: Determination of electrical resistivity
  • UNE 83980:2014 Concrete durability. Test methods. Determination of the water absorption, density and accessible porosity for water in concrete.
  • UNE-EN ISO 787-14:2003 General methods of test for pigments and extenders -- Part 14: Determination of resistivity of aqueous extract. (ISO 787-14:2002)
  • UNE-EN 61340-2-3:2001 Electrostatics -- Part 2-3: Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation.
  • UNE-EN ISO 8031:2010 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009)
  • UNE-ISO 6587:2008 Paper, board and pulps. Determination of conductivity of aqueous extracts.
  • UNE 83988-2:2014 Concrete durability. Test methods. Determination of the electrical resistivity. Part 2: Four points or Wenner method.
  • UNE 83988-1:2008 Concrete durability. Test methods. Determination of the electrical resistivity. Part 1: Direct test (reference method).
  • UNE-EN ISO 5135:1999 ACOUSTICS- DETERMINATION OF SOUND POWER LEVELS OF NOISE FROM AIR-TERMINAL UNITS, DAMPERS AND VALVES BY MEASUREMENT IN A REVERBERATION ROOM (ISO 5135:1997)

Lithuanian Standards Office , Determination of resistivity in water

  • LST EN ISO 15091:2013 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012)
  • LST EN 27888-1999 Water quality - Determination of electrical conductivity (ISO 7888:1985)
  • LST EN 14617-13-2005 Agglomerated stone - Test methods - Part 13: Determination of electrical resistivity
  • LST EN ISO 787-14:2002 General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract (ISO 787-14:2002)
  • LST EN ISO 8031:2010 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009)
  • LST EN 61340-2-3-2002 Electrostatics. Part 2-3: Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation (IEC 61340-2-3:2000)

Jilin Provincial Standard of the People's Republic of China, Determination of resistivity in water

  • DB22/T 3102-2020 Determination of water quality and temperature by thermistor sensor method

Anhui Provincial Standard of the People's Republic of China, Determination of resistivity in water

  • DB34/T 2215-2014 Determination of Water Absorption in Drought Resistant Compound Fertilizer

International Electrotechnical Commission (IEC), Determination of resistivity in water

  • IEC 62631-3-2:2015 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity
  • IEC 62631-3-4:2019 Dielectric and resistive properties of solid insulating materials - Part 3-4: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity at elevated temperatures
  • IEC 62631-3-1:2023 RLV Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method
  • IEC 62631-3-1:2023 Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method
  • IEC 60115-4-3:1993 Fixed resistors for use in electronic equipment; part 4: blank detail specification: fixed power resistors, heat-sink types; assessment level H
  • IEC 62631-3-1:2016 Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method
  • IEC 62631-3-11:2018 Dielectric and resistive properties of solid insulating materials - Part 3-11: Determination of resistive properties (DC Methods) - Volume resistance and volume resistivity - Method for impregnation a
  • IEC 60115-6-1:1983 Fixed resistors for use in electronic equipment. Part 6: Blank detail specification: Fixed resistor networks with individually measurable resistors, all of equal value and equal dissipation. Assessment Level E
  • IEC 61340-2-3:2016 RLV Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
  • IEC 60115-4-101:1995 Fixed resistors for use in electronic equipment - Part 4: Detail specification: Fixed power wirewound resistors with solderable axial wire leads - Stability class 5% - Assessment level E
  • IEC 60115-4-102:1995 Fixed resistors for use in electronic equipment - Part 4: Detail specification: Fixed power wirewound resistors with solderable axial wire leads - Stability class 1% - Assessment level E
  • IEC 61340-2-3:2000 Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation
  • IEC 60115-7-1:1984 Sectional specification : Fixed resistor networks in which not all resistors are individually measurable. Part 7 : Sectional specification : Fixed resistor networks in which not all resistors are indivudually measurable. Assessment level E
  • IEC 60115-9-1:2003 Fixed resistors for use in electronic equipment - Part 9-1: Blank detail specification: Fixed surface mount resistor networks with individually measurable resistors; Assessment level EZ
  • IEC 60115-6-2:1983 Sectional specification : Fixed resistor networks in which not all resistors are individually measurable. Part 6 : Sectional specification: Fixed resistors networks with individually measurable resistors. Blank detail specification: Fixed resistor network

European Committee for Electrotechnical Standardization（CENELEC）, Determination of resistivity in water

  • EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity
  • EN 62631-3-1:2016 Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method
  • EN 60195:2016 Method of measurement of current noise generated in fixed resistors
  • EN 61340-2-3:2016 Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
  • EN 61340-2-3:2000 Electrostatics - Part 2-3: Methods of Test for Determining the Resistance and Resistivity of Solid Planar Materials Used to Avoid Electrostatic Charge Accumulation
  • EN 60115-9-1:2004 Fixed resistors for use in electronic equipment Part 9-1: Blank detail specification - Fixed surface mount resistor networks with individually measurable resistors - Assessment level EZ

AT-ON, Determination of resistivity in water

  • ONORM EN 27888-1993 Water quality. Determination of electrical conductivity (ISO 7888:1985)
  • OENORM EN ISO 8031:2020 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2020)
  • ONORM S 5046-1990 Measuring and working conditions for the determination of sound power of machine sets in hydroelectric power stations and water pumping plants
  • ONR CEN/TS 17481-2020 Bitumen and bituminous binders - Determination of salt content in bitumen - Electrical conductivity method

Standard Association of Australia （SAA）, Determination of resistivity in water

  • IEC 62631-3-2:2023 Dielectric and resistive properties of solid insulating materials — Part 3-2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
  • IEC 62631-3-2:2023 CMV Dielectric and resistive properties of solid insulating materials — Part 3-2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
  • AS 1180.13B:1987 Methods of test for hose made from elastomeric materials - Determination of electrical resistance of hose assembly
  • AS/NZS 61241.2.2:2000 Electrical apparatus for use in the presence of combustible dust - Test methods - Method for determining the electrical resistivity of dust in layers
  • AS 1180.13A:1983 Methods of test for hose made from elastomeric materials - Determination of electrical resistance of hose and hose components
  • IEC 61340-2-3:2016/COR1:2023 Corrigendum 1 — Electrostatics — Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
  • AS 1289.4.4.1:2017 Methods of testing soils for engineering purposes, Method 4.4.1: Soil chemical tests — Determination of the electrical resistivity of a soil — Method for fine granular materials
  • AS 1289.4.4.1:1997 Methods of testing soils for engineering purposes - Soil chemical tests - Determination of the electrical resistivity of a soil - Method for sands and granular materials

American National Standards Institute （ANSI), Determination of resistivity in water

  • ANSI/ASTM D7148:2013 Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
  • ANSI/EIA 364-112:2010 Test Procedure for Determining the Contact Resistance and Current Rating of Parallel Circuits in an Electrical Connector or Socket

CENELEC - European Committee for Electrotechnical Standardization, Determination of resistivity in water

  • EN IEC 62631-3-4:2019 Dielectric and resistive properties of solid insulating materials - Part 3-4: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity at elevated temperatures
  • EN IEC 62631-3-11:2018 Dielectric and resistive properties of solid insulating materials - Part 3-11: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - Method for impregnation and coating materials
  • PREN 50359-1-2-2000 Advanced Technical Ceramics Part 1-2: Electrical Properties - Determination of the Surface and Volume Resistivity in the Temperature Range 20 Degrees C to 800 Degrees C

TH-TISI, Determination of resistivity in water

  • TIS 2030-2000 Fixed resistors for use in electronic equipment.part 4: blank detail specification: fixed power resistors, heat.sink types.assessment level h
  • TIS 1780.14-1999 General methods of test for pigments.part ⅩⅣ: determination of resistivity of aqueous extract
  • TIS 1525-1998 Fixed resistors for use in electronic equipment.part 4: detail specification: fixed power wirewound resistors with solderable axial wire leads.stability class 5%.assessment level e
  • TIS 1526-1998 Fixed resistors for use in electronic equipment.part 4: detail specification: fixed power wirewound resistors with solderable axial wire leads.stability class 1%.assessment level e

Group Standards of the People's Republic of China, Determination of resistivity in water

  • T/SBX 027-2019 Determination of Resistivity of Nematic Thermotropic Liquid Crystal Monomer by DC Voltage Method
  • T/JPMA 002-2019 Determination of 9 organophosphorus flame retardants in drinking water by solid phase extraction-gas chromatography method
  • T/QAS 007-2019 Determination of Lithium in Brine-Inductively Coupled Plasma Mass Spectrometry

Hebei Provincial Standard of the People's Republic of China, Determination of resistivity in water

  • DB13/T 5537-2022 Determination of Resistivity of Nematic Thermotropic Liquid Crystal Monomer by DC Voltage Method
  • DB13/T 5026.3-2019 Method for Determination of Physical Properties of Graphene Conductive Paste Part 3: Four-probe Method for Determination of Electrode Resistivity of Paste

CEN - European Committee for Standardization, Determination of resistivity in water

  • EN 14617-13:2005 Agglomerated stone - Test methods - Part 13: Determination of electrical resistivity
  • EN ISO 787-14:2019 General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract
  • EN 14701-2:2006 Characterization of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration

Liaoning Provincial Standard of the People's Republic of China, Determination of resistivity in water

  • DB21/T 2662.9-2016 Boiler Operation Specification Part 9: Determination of Scale Inhibition Rate of Industrial Hot Water Boiler by Normal Pressure Method

Professional Standard - Non-ferrous Metal, Determination of resistivity in water

  • YS/T 63.2-2023 Carbonaceous materials used for the production of aluminium— Part 2：Determination of electrical resistivity at ambient temperature
  • YS/T 587.6-2006 Calcined coke for prebaked blocks. Testing methods. Part 6: Determination of electrical resistivity of granules
  • YS/T 63.2-2006 Carbonaceous materials used in the production of aluminium-Part 2: Cathode blocks and prebaked anodes-Determination of electrical resistivity at ambient temperature

Professional Standard - Geology, Determination of resistivity in water

  • DZ/T 0064.6-1993 Determination of electrical conductivity by groundwater quality inspection method
  • DZ/T 0064.6-2021 Analytical methods for groundwater quality - Part 6: Electrode method for the determination of electrical conductivity

YU-JUS, Determination of resistivity in water

  • JUS N.R3.251-1993 Fixed resistors for use in electronic equipment - Fixed power wirewound resistors protected within ceramic case, insulated - Stability class 5% - Assessment level E - Detail specification
  • JUS N.R3.252-1993 Fixed resistors for use in electronic equipment - Fixed power wirewound resistors protected within ceramic case, insulated - Stability class 5% - Assessment level E - Detail specification

AT-OVE/ON, Determination of resistivity in water

  • OVE EN IEC 62631-3-1:2021 Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method (IEC 112/504/CDV) (english version)

CH-SNV, Determination of resistivity in water

  • SN EN ISO 8031:2020 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2020)

Professional Standard - Speciality, Determination of resistivity in water

  • ZB G72002-1989 Determination of conductivity of water or aqueous solutions for surfactant tests

RO-ASRO, Determination of resistivity in water

  • STAS 8890-1980 Electrical insulating paper and board DETERMINATION OF CONDUCTIVITY OF AQUEOUS EXTRACT
  • STAS 11197-1979 WATER AND STEAM FOR BOILERS Determination of hydrogen ions activity in waters with reduced electroconductibility

Shanxi Provincial Standard of the People's Republic of China, Determination of resistivity in water

  • DB14/T 1382-2017 Determination of Total Water-Soluble Salt in Saline Soil--Conductivity Method
  • DB14/T 1099-2015 Determination of Hydrolyzable Nitrogen in Soil Alkaline Hydrolysis Distillation Potentiometric Titration

Professional Standard - Chemical Industry, Determination of resistivity in water

  • HG/T 3506-1999 Surface active agents.Determination of electrical conductivity of water or aqueous solutions for tests
  • HG/T 2157-1991 Determination of ammonium in industrial circulating cooling water Potential method
  • HG/T 2157-2011 Potentiometric Determination of Ammonium in Industrial Circulating Cooling Water
  • HG/T 5166~5167-2017 Evaluation of scale inhibition performance of reverse osmosis antiscalants and determination method of carboxylate and sulfonate polymer content in circulating cooling water (2017)

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Determination of resistivity in water

  • JEDEC JESD22-A120B-2014 Test Method for the Measurement of Moisture Diffusivity and Water Solubility in Organic Materials Used in Electronic Devices

FI-SFS, Determination of resistivity in water

  • SFS 3027 E-1976 In the event of any differences in interpretation of this standard the Finnish version shall take precedence over this translation.

Professional Standard - Petroleum, Determination of resistivity in water

  • SY/T 7507-1997 Determination of water in natural gas-Electrolytic method

Insulated Cable Engineers Association （ICEA), Determination of resistivity in water

  • ICEA T-32-645-2012 TEST METHOD FOR ESTABLISHING VOLUME RESISTIVITY COMPATIBILITY OF WATER BLOCKING COMPONENTS WITH EXTRUDED SEMICONDUCTING SHIELD MATERIALS

IX-ECMA, Determination of resistivity in water

  • ECMA 328-2007 Determination of Chemical Emission Rates from Electronic Equipment 3rd Edition
  • ECMA 328-2010 Determination of Chemical Emission Rates from Electronic Equipment 5th Edition

Professional Standard - Commodity Inspection, Determination of resistivity in water

  • SN/T 2261-2009 Determination of water-soluble chloride in iron ore by potentiometric titration

Society of Automotive Engineers (SAE), Determination of resistivity in water

  • SAE J2758-2007 Determination of the Maximum Available Power from a Rechargeable Energy Storage System on a Hybrid Electric Vehicle

SAE - SAE International, Determination of resistivity in water

  • SAE J2758-2018 Determination of the Maximum Available Power from a Rechargeable Energy Storage System on a Hybrid Electric Vehicle

IECQ - IEC: Quality Assessment System for Electronic Components, Determination of resistivity in water

  • QC 400401/ JP 0002-1984 Detail Specification for Use in Electronic Equipment: Fixed Resistor Networks with Individually Measurable Resistors@ All of Equal Value and Equal Dissipation Single-in- Line with Isolated Resistors

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Determination of resistivity in water

  • PREN 2378-1988 Aerospace Series Fibre Reinforced Plastics Determination of Water Absorption by Immersion in Demineralised Water (Issue P 1)

Indonesia Standards, Determination of resistivity in water

Professional Standard - Electricity, Determination of resistivity in water

  • DL/T 502.29-2006 Analytical methods of steam and water in power plants Part 29: Determination of cation conductivity
  • DL/T 502.29-2019 Water Vapor Analysis Methods for Thermal Power Plants Part 29: Determination of Hydrogen Conductivity

Underwriters Laboratories (UL), Determination of resistivity in water

  • UL 2257 BULLETIN-2015 Outline of Investigation for Identification Tests for Jacket and Insulation Materials used in Plenum Cables

Professional Standard - Petrochemical Industry, Determination of resistivity in water

  • NB/SH/T 0207-2010 Standard test method for water in insulating liquids by coulometric Karl Fischer titration

国家质量监督检验检疫总局, Determination of resistivity in water

  • SN/T 4761-2017 Determination of fluorine in coal using high temperature combustion hydrolysis-automatic potentiometric titration method

Qinghai Provincial Standard of the People's Republic of China, Determination of resistivity in water

  • DB63/T 1849-2020 Determination of Lithium in Brine by Inductively Coupled Plasma Mass Spectrometry

IEC - International Electrotechnical Commission, Determination of resistivity in water

  • PAS 62307-2002 Test Method for the Measurement of Moisture Diffusivity and Water Solubility in Organic Materials Used in Integrated Circuits (Edition 1.0; Jedec JESD22-A120: June 2001)

Professional Standard - Agriculture, Determination of resistivity in water

  • 水产品质量安全检验手册 7.2.1.3-2005 Chapter 7 Inspection of additives in aquatic products Section 2 Determination of sweeteners in aquatic products 1. Determination of sodium saccharin (GBT 5009.28-2003) (3) Determination method of ion selective electrode

  Determination of tin in water, Determination of iodine in water, Determination of ts in water, Determination of Mercury in Water, Determination of voc in water, Determination of as in water, Determination of phenol in water, Mercury Determination in Water, Determination of resistivity in water, Determination of manganese in water, Determination of Arsenic in Water, Determination of fluorine in water, Measuring the resistivity of water, Determination of ph in water, Determination of toc in water, Determination method of electrical resistivity of coke, Determination of aniline in water, Determination of ammonium nitrogen in water, Method for Determination of Nickel in Water, Determination of Benzene in Water.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved