ZH
RU
ES

supply heat meter

supply heat meter, Total:275 items.

In the international standard classification, supply heat meter involves: Electricity. Magnetism. Electrical and magnetic measurements, Burners. Boilers, Petroleum, petroleum products and natural gas handling equipment, Installations in buildings, Domestic, commercial and industrial heating appliances, Linear and angular measurements, Valves, Thermodynamics and temperature measurements, Surface treatment and coating, Technical drawings, Aircraft and space vehicles in general, Quality, Heat recovery. Thermal insulation, Industrial furnaces, Heat pumps, Powder metallurgy, Pipeline components and pipelines, Kitchen equipment, Rubber and plastics products, Protection against fire, Accident and disaster control, Protection of and in buildings, Nuclear energy engineering, Solar energy engineering, Environmental protection, Construction industry, Metrology and measurement in general, Reinforced plastics, Railway rolling stock, Applications of information technology, Energy and heat transfer engineering in general, Elements of buildings, Fuels, Protective equipment, Products of the textile industry, Microbiology, Iron and steel products, Vocabularies, Pumps, Earthworks. Excavations. Foundation construction. Underground works.

ZA-SANS, supply heat meter

SANS 1816:2005 Electricity supply - Quality of supply: Power quality instruments

Korean Agency for Technology and Standards (KATS), supply heat meter

KS B 8134-2017 Hot water tank for hot water supply
KS B 8134-2017(2022) Hot water tank for hot water supply
KS D ISO 14232-2003(2008) Thermal spraying－Powders－Composition and technical supply conditions
KS M 3414-1994 Chlorinated polyvinyl chloride(CPVC) pipes for hot and cold water supply
KS M 3415-1994 Chlorinated polyvinyl chloride(CPVC) pipes fittings for hot and cold water supply
KS B 8132-1-2012 Gas-fired domestic appliances producing hot water－Appliances 70 kW heat input and 300 L water storage capacity－Part 1：Assessment of performance of hot water deliveries
KS M ISO 9631:2018 Rubber seals — Joint rings for pipelines for hot-water supply up to 110 ℃ — Specification for the material
KS D ISO 14919-2013(2018) Thermal spraying — Wires, rods and cords for flame and ard spraying — Classification — Technical supply conditions
KS D ISO 4950-3-2003(2013) High yield strength flat steel products－Part 3：Products supplied in the heat-treated(quenched＋tempered) condition

CZ-CSN, supply heat meter

CSN 83 0616-1987 Quality of warm service water
CSN ON 42 0217-1968

TR-TSE, supply heat meter

TS 430-1966 CAST IRON BOILER FOR CENTRAL HEATING AND HOT VVATER SUPPLY
TS 497-1967 VVelded Steel Boilers for central heating and hot water supply

Standard Association of Australia （SAA）, supply heat meter

AS 4552:2005 Gas fired water heaters for hot water supply and/or central heating
AS 4032.4:2014 Water supply — Valves for the control of heated water supply temperatures, Part 4: Thermostatically controlled taps for the control of heated water supply temperatures
AS 3500.4:1994/Amdt 1:1996
AS/NZS 5263.1.2:2020 Gas appliances, Part 1.2: Gas fired water heaters for hot water supply and/or central heating
AS 3500.4:1994 National Plumbing and Drainage Code - Hot water supply systems
AS/NZS 4552.2:2010
AS 4032.2:2005(R2015)/Amdt 2:2009
AS 4032.2:2005(R2015)/Amdt 1:2006
AS 4032.2:2005(R2015)
AS 3500.4.1:1997 National Plumbing and Drainage - Hot water supply systems - Performance requirements
AS 3565.1:2010
AS 3571:1989 Glass filament reinforced thermosetting plastics (GRP) pipes - Polyester based - Water supply, sewerage and drainage applications
AS/NZS 3500.4.2:1997 National Plumbing and Drainage - Hot water supply systems - Acceptable solutions
AS/NZS 3500.4:2003/AMD 1:2005 Amendment No. 1 (2005) to AS/NZS 3500.4:2003 Plumbing and drainage Part 4: Heated water services
AS 4032.3:2022 Water supply — Valves for the control of heated water supply temperatures, Part 3: Requirements for field-testing, maintenance or replacement of valves, taps and devices
AS 4032.2:2005/AMD 2:2009 Amendment No. 2 to AS 4032.2—2005 Water supply—Valves for the control of hot water supply temperatures Part 2: Tempering valves and end-of-line temperature-actuated devices
AS 4032.2:2005 Water supply - Valves for the control of hot water supply temperatures - Tempering valves and end-of-line temperature-actuated devices

PL-PKN, supply heat meter

PN M34801-04-1988 'Auxiliary heat e?uipment in power stations, heat power stations, and heating plants Thermic deaerator of heating systems Re?uirements and tests
PN T06504-1987 Electronic measuring equipments Electronic stabilized d.c. supply apparatus General requirements and tests

American Water Works Association (AWWA), supply heat meter

AWWA M22-2004 Sizing Water Service Lines and Meters Second Edition

American National Standards Institute （ANSI), supply heat meter

ANSI/NSF 5-2005 Water Heaters, Hot Water Supply Boilers, and Heat Recovery Equipment
ANSI/NSF 5(i5)-2009 Water heaters, hot water supply boilers, and heat recovery equipment
ANSI Z21.22b-2001 Relief Valves for Hot Water Supply Systems (same as CSA 4.4b)
ANSI/NSF 5(i4)-2007 Water heaters, hot water supply boilers, and heat recovery equipment
ANSI Z21.87 Addenda a-2007 Standard for Automatic Gas Shutoff Devices for Hot Water Supply Systems (same as CSA 4.6)

National Sanitation Foundation (NSF), supply heat meter

NSF 5-2016 Water Heaters, Hot Water Supply Boilers, and Heat Recovery Equipment
NSF 5E-2000 Water Heaters, Hot Water Supply Boilers, and Heat Recovery Equipment Printed 01/15/2002
NSF 5-2007 Water heaters, hot water supply boilers, and heat recovery equipment Printed 04/11/2007

Japanese Industrial Standards Committee (JISC), supply heat meter

JIS B 8640:2021 Low-velocity radiant heating and cooling air supply unit
JIS K 6776:1999 Chlorinated polyvinyl chloride (CPVC) pipes for hot and cold water supply
JIS K 6776:2004 Chlorinated poly(vinyl chloride) (PVC-C) pipes for hot and cold water supply
JIS K 6777:2004 Chlorinated poly(vinyl chloride) (PVC-C) pipe fittings for hot and cold water supply
JIS K 6777 AMD 3:2011 Chlorinated poly (vinyl chloride) (PVC-C) pipe fittings for hot and cold water supply (Amendment 3)
JIS K 6777 AMD 1:2009 Chlorinated poly (vinyl chloride) (PVC-C) pipe fittings for hot and cold water supply (Amendment 1)
JIS K 6775-1:2005 Polyethylene pipe-fittings for the supply of gaseous fuels -- Part 1: Heatfusion fittings
JIS K 6777 AMD 2:2010 Chlorinated poly (vinyl chloride) (PVC-C) pipe fittings for hot and cold water supply (Amendment 2)
JIS A 1713:1994 Method of test for hot-water supply of air-conditioning unit for dwellings

British Standards Institution (BSI), supply heat meter

BIP 2177-2008 Hot and Cold Water Supply - 3rd edition
BS ISO 19967-1:2019 Heat pump water heaters. Testing and rating for performance - Heat pump water heater for hot water supply
BS 855:1990 Specification for welded steel boilers for central heating and indirect hot water supply (rated output 44 kW to 3 MW)
BS 779:1989 Specification for cast iron boilers for central heating and indirect hot water supply (rated output 44 kW and above)
BS EN 26:1998 Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
BS PD CEN/TR 15339-4:2014 Thermal spraying. Safety requirements for thermal spraying equipment. Gas and liquid fuel supply
BS EN 14419:2003 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems
BS 5410-1:2019 Tracked Changes. Code of practice for liquid fuel firing. Installations for space heating and hot water supply purposes for domestic buildings
BS 853-1:1990 Specification for vessels for use in heating systems. Calorifiers and storage vessels for central heating and hot water supply
BS 853-1:1990+A3:2011 Specification for vessels for use in heating systems. Calorifiers and storage vessels for central heating and hot water supply
BS EN 15092:2008 Building valves - Inline hot water supply tempering valves - Tests and requirements
BS EN 203-2:1995 Specification for gas heated catering equipment - Rational use of energy
BS CP 342-2:1974 Code of practice for centralized hot water supply - Buildings other than individual dwellings
BS 5410-1:1998 Code of practice for oil firing - Installations up to 45 kW output capacity for space heating and hot water supply purposes
BS 5410-1:1997 Code of practice for oil firing - Installations up to 45 kW output capacity for space heating and hot water supply purposes
BS 5410-1:2014 Code of practice for oil firing. Installations up to 45 kW output capacity for space heating and hot water supply purposes
BS ISO 19659-2:2020 Railway applications. Heating, ventilation and air conditioning systems for rolling stock - Thermal comfort
BS EN 253:2003 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
BS 6144:1990 Specification for expansion vessels using an internal diaphragm, for unvented hot water supply systems
BS ISO 5660-1:2015+A1:2019 Reaction-to-fire tests. Heat release, smoke production and mass loss rate - Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
BS EN 488:2003 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 488:2011 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 488:2011+A1:2014 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 488:2015 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 448:2003 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS 5410-2:1978 Code of practice for oil firing - Installations of 45 kW and above output capacity for space heating, hot water and steam supply services
CP 342-2-1974 Code of practice for centralized hot water supply. Buildings other than individual dwellings
BS EN 253:2003+A2:2006 District heating pipes — Preinsulated bonded pipe systems for directly buried hot water networks — Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
BS EN 253:2009 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
BS 5410-2:2013 Code of practice for oil firing.Part 2:Installations over 45 kW output capacity for space heating, hot water and steam supply services
BS EN 14214:2012 Liquid petroleum products. Fatty acid methyl esters (FAME) for use in diesel engines and heating applications. Requirements and test methods
BS EN 14214:2012+A1:2014 Liquid petroleum products. Fatty acid methyl esters (FAME) for use in diesel engines and heating applications. Requirements and test methods
BS EN ISO 11092:2014 Textiles. Physiological effects. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
BS EN ISO 20836:2021 Microbiology of the food chain. Polymerase chain reaction (PCR) for the detection of microorganisms. Thermal performance testing of thermal cyclers
BS EN 1151:1999 Pumps - Rotodynamic pumps - Circulation pumps having an electrical effect not exceeding 200 W for heating installations and domestic hot water installations - Requirements, testing, marking

Professional Standard - Recommended Standards for Engineering Construction, supply heat meter

CECS 60-1994 SPECIFICATION FOR DESIGN OF HOTWATER SUPPLY WITH SEMI-INSTANTANEOUS WATER HEATER
CECS 134-2002 Specification for design of hot water supply with hurning oil and gas hot water heater
CECS 134-2002（条文说明） Specification for design of hot water supply with hurning oil and gas hot water heater
CECS 222-2007 Specification for Design of central hot water supply system in sub-district

RU-GOST R, supply heat meter

GOST R 51649-2014 Heat meters for water heat supply systems. General specifications
GOST R 51649-2000 Heat meters for water heat supply systems. General specifications
GOST 34059-2017 Internal buildings and structures utilities. Arrangement of heating, heating and cooling water supply systems. General technical requirements
GOST R 55596-2013 District heating systems. Standard for the stress and seismic analysis
GOST R 8.778-2011 State system for ensuring the uniformity of measurements. Measuring instruments of heat energy hot-water heating systems. Metrological assurance. Main principles
GOST R 56779-2015 Systems of distribution of potable water hot-supply. Computational method of energy consumption and effectiveness
GOST R 56776-2015 The systems of preparation of consumer hot water-supply. Computational method of energy consumption and effectiveness
GOST R 54444-2011 Heating boilers. Part 7. Boilers with gas burners with forced air central heating supply with a thermal input not exceeding 1000 kW
GOST R 8.592-2002 State system for ensuring the uniformity of measurements. Thermal energy, received by users in water heat supply system. Typical procedure of measurements
GOST R 12.4.275-2012 Occupational safety standards system. Respiratory protective devices. Poweredatmospheric air supply hose apparatus with helmet. Technical requirements. Test methods. Marking
GOST R 8.591-2002 State system for ensuring the uniformity of measurements. Two channel heat meters for water heat supply systems. Standardization of admitted error limits in measurements of the used thermal energy by users
GOST R 52932-2008 Electromagnetic, ultrasonic, vortex and fluid oscillator counters for water heat supply systems. General specifications

国家市场监督管理总局、中国国家标准化管理委员会, supply heat meter

GB/T 37707-2019 Thermal spraying—Components with thermally sprayed coatings—Technical supply conditions

BE-NBN, supply heat meter

NBN 504-1960
NBN 857-1970 Centrale verwarming,luchtverversing en klimaatregeling EJECTO-CONVECTOREN
NBN C 73-335-61-1992

CH-SNV, supply heat meter

VSM 76140.3-1974

European Committee for Standardization (CEN), supply heat meter

EN 834:2013 Heat cost allocators for the determination of the consumption of room heating radiators - Appliances with electrical energy supply (Incorporating corrigendum April 2015)
EN 89:2015 Gas-fired storage water heaters for the production of domestic hot water
EN 26:1977 Gas burning appliances for instantaneous production of hot water for domestic use
EN 26:1977/A3:1984 Gas burning appliances for instantaneous production of hot water for domestic use
EN 26:1977/A4:1984 Gas burning appliances for instantaneous production of hot water for domestic use
EN 26:2015 Gas-fired instantaneous water heaters for the production of domestic hot water
EN ISO 12670:2015 Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions
EN 26:1997/A1:2000 Gas-Fired Instantaneous Water Heaters for the Production of Domestic Hot Water, Fitted with Atmospheric Burners Ratified European Text; Amendment 1: 10/2000
EN 89:1999/A1:1999 AMD 1 Gas-Fired Storage Water Heaters for the Production of Domestic Hot Water Ratified European Text
EN 26:1977/A5:1985 Gas burning appliances for instantaneous production of hot water for domestic use; amendment EN 26:1977.09
EN 26:1977/A6:1988 Gas burning appliances for instantaneous production of hot water for domestic use; amendment to EN 26:1977.09
EN 13203-1:2015 Gas fired domestic appliances producing hot water - Part 1: Assessment of performance of hot water deliveries
EN 14419:2003 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems
EN 488:2003 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
EN 488:1994 Preinsulated Bonded Pipe Systems for Underground Hot Water Networks - Steel Valve Assembly for Steel Service Pipes, Polyurethane Thermal Insulation and Outer Casing of Polyethylene
EN 15092:2008 Building valves - Inline hot water supply tempering valves - Tests and requirements
PD CEN/TR 15339-4:2014 Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply
EN 489:2003 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
EN 489:1994 Preinsulated Bonded Pipe Systems for Underground Hot Water Networks - Joint Assembly for Steel Service Pipes, Polyurethane Thermal Insulation and Outer Casing of Polyethylene
EN 448:2003 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
PD CEN/TR 15339-3:2014 Thermal spraying - Safety requirements for thermal spraying equipment - Part 3: Torches for thermal spraying and their connection and supply units
EN 488:2011 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene (Incorporates Amendment A1: 2014)
EN 253:2003 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene Includes Amendment A2: 2006
EN 15767-2:2009 Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable monitors - Part 2: Water nozzles

IN-BIS, supply heat meter

CEN - European Committee for Standardization, supply heat meter

EN 26:1997 Gas-Fired Instantaneous Water Heaters for the Production of Domestic Hot Water@ Fitted with Atmospheric Burners (Incorporating Corrigendum July 1998; Incorporates Amendments A1: 2000 and A2: 2004)
EN 26:2015/PRA1:2016 Gas-fired instantaneous water heaters for the production of domestic hot water
EN 89:2015/PRA1:2016 Gas-fired storage water heaters for the production of domestic hot water
EN 14419:2009 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems
EN 489:2009 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes@ polyurethane thermal insulation and outer casing of polyethylene
PREN 12514-3-2009 Parts for supply systems for consuming units with liquid fuels - Part 3: Safety requirements and tests - Valves and meters

German Institute for Standardization, supply heat meter

DIN 2425-2:1977 Plans for public supplies, for water engineering and for transmission lines; plans for pipe-systems for distant-heating
DIN 3363-2:1986 Gas heated catering equipment; convection-ovens
DIN EN ISO 12670:2015-12 Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011); German version EN ISO 12670:2015
DIN EN 12101-10:2006 Smoke and heat control systems - Part 10: Power supplies; English version of DIN EN 12101-10:2006
DIN EN 15092:2008-09 Building valves - Inline hot water supply tempering valves - Tests and requirements; German version EN 15092:2008
DIN EN 14419:2004 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems; German version EN 14419:2003
DIN EN 15092:2008 Building valves - Inline hot water supply tempering valves - Tests and requirements; English version of DIN EN 15092:2008-09
DIN 18380:2006 German construction contract procedures - Part C: General technical specifications for building works - Systems for heating and central water heating
DIN CEN/TR 15339-4:2020-11 Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply; German version CEN/TR 15339-4:2014
DIN EN 834:2013 Heat cost allocators for the determination of the consumption of room heating radiators - Appliances with electrical energy supply; German version EN 834:2013
DIN SPEC 4701-10/A1:2012 Energy efficiency of heating and ventilation systems in buildings - Part 10: Heating, domestic hot water supply, ventilation; Amendment A1
DIN EN 14037-2:2003 Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 2: Test method for thermal output; German version EN 14037-2:2003
DIN EN 834:2017 Heat cost allocators for the determination of the consumption of room heating radiators - Appliances with electrical energy supply; German version EN 834:2013 + AC:2015
DIN EN ISO 14232-1:2017 Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017)
DIN EN ISO 14232-1:2017-08 Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017); German version EN ISO 14232-1:2017
DIN EN 488:2016 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 488:2015
DIN EN 488:2014 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 488:2011+A1:2014
DIN 18380:2016 German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Installation of central heating systems and hot water supply systems
DIN 18380:2012 German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Installation of central heating systems and hot water supply systems
DIN 18897-1:2005-06 Fireplaces fired by solid fuel - Independent supply through the room air - Part 1: Roomheaters / Note: Applies in conjunction with DIN 18890 (1971-09), DIN 18891 (1984-08), DIN EN 13240 (2002-02), DIN EN 14785 (2004-05).
DIN EN ISO 14919:2023-02 Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO/DIS 14919:2023); German and English version prEN ISO 14919:2023 / Note: Date of issue 2023-01-06*Intended as replacement for DIN EN ...
DIN CEN/TR 15339-4:2020 Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply; German version CEN/TR 15339-4:2014
DIN EN 14037-3:2003 Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 3: Thermal conversion, rating methods and evaluation of the radiant thermal output; German version EN 14037-3:2003
DIN EN ISO 20836:2022-05 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers (ISO 20836:2021); German version EN ISO 20836:2021
DIN EN 14419:2009 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems; German and English version EN 14419:2009
DIN 18380:2019-09 German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Installation of central heating systems and hot water supply systems
DIN EN 14037-1:2003 Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 1: Technical specifications and requirements; German version EN 14037-1:2003
DIN EN 835:1995-04 Heat cost allocators for the determination of the consumption of room heating radiators - Appliances without electrical energy supply based on the evaporation principle; German version EN 835:1994
DIN EN ISO 14919:2015-04 Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015); German version EN ISO 14919:2015 / Note: To be replaced by DIN EN ISO 14919 (2023-02).

BELST, supply heat meter

STB 1293-2001 Polymeric pipes for systems of heating and hot water supply. General specifications

Society of Automotive Engineers (SAE), supply heat meter

SAE AS7109/7A-2005 (R) Nadcap Requirements for Heat Treating for Suppliers of Coatings

Danish Standards Foundation, supply heat meter

DS 452:2020 Thermal insulation of technical service and supply systems
DS/EN 1274:2005 Thermal spraying - Powders - Composition, technical supply conditions
DS/EN 15311:2007 Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions
DS 452:2000 Code of Practice for thermal insulation of technical service and supply systems in buildings
DS/EN 834:2013 Heat cost allocators for the determination of the consumption of room heating radiators - Appliances with electrical energy supply
DS/ISO 14696:2009 Reaction-to-fire tests - Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
DS/EN ISO 14919:2001 Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions
DS/EN 14989-2:2008 Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances
DS/EN 835:1995 Heat costs allocators for the determination of the consumption of room heating radiators - Appliances without an electrical energy supply, based on the evaporation principle

Canadian Standards Association (CSA), supply heat meter

CSA 4.4B-2001 Relief Valves for Hot Water Supply Systems First Edition
CSA 4.4A-2000 Relief Valves for Hot Water Supply Systems First Edition
CSA 4.6-2007-2007 Automatic Gas Shutoff Devices for Hot Water Supply Systems Second Edition
CSA 4.4-M99-1999 Relief Valves for Hot Water Supply Systems First Edition
CSA/AM CSA/ANSI Z21.87-1999 Automatic Gas Shutoff Devices for Hot Water Supply Systems First Edition; CSA 4.6-M99; Addenda A: 2004; Addenda B: 2005

Group Standards of the People's Republic of China, supply heat meter

T/CES 090-2022 Technical requirements for induction heating type centralized electric heating device
T/BJWSA 0005-2020 Specifications for the construction of professional emergency rescue teams for heating protection
T/CIECCPA 004-2022 Technical specification for infrared radiation emergency heating by gas catalytic combustion
T/SDSIA 5-2018 Technical Specifications for the Application of Solar Energy + Multi-energy Complementary Clean Heating System
T/CECS 642-2019 Technical specification for application of carbon fiber heating wire ground radiant heating system for buildings

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., supply heat meter

ASHRAE SE-99-9-1999 Symposium on Application of New Technologies in the Design of District Heating and Cooling

Canadian Standards Association/American National Standards , supply heat meter

CSA/AM CSA/ANSI Z21.22A-2000-2000 Relief Valves for Hot Water Supply Systems First Edition
CSA/AM CSA/ANSI Z21.22-1999-1999 Relief Valves for Hot Water Supply Systems First Edition

Lithuanian Standards Office , supply heat meter

LST EN 1274-2005 Thermal spraying - Powders - Composition, technical supply conditions
LST EN 15311-2007 Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions
LST EN 835-2000 Heat cost allocators for the determination of the consumption of room heating radiators - Appliances without an electrical energy supply, based on the evaporation principle
LST EN 834-2000 Heat cost allocators for the determination of the consumption of room heating radiators - Appliances with electrical energy supply
LST EN 488-2011+A1-2014 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
LST EN 14989-2-2008 Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances
LST EN ISO 14919:2002 Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2001)

SAE - SAE International, supply heat meter

SAE AS7109/7B-2017 Nadcap Requirements for Heat Treating for Suppliers of Coatings
SAE AS7109/7-1995 National Aerospace and Defense Contractors Accreditation Program Requirements for Heat Treating for Suppliers of Coatings

NZ-SNZ, supply heat meter

AS/NZS 5263.1.2:2016 Gas appliances Part 1.2: Gas fired water heaters for hot water supply and/or central heating

Association Francaise de Normalisation, supply heat meter

NF A91-213:1996 Thermal spraying. Powders. Composition. Technical supply conditions.
NF D35-322/A2:2004 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners.
NF A91-241-1*NF EN ISO 14232-1:2017 Thermal spraying - Powders - Part 1 : characterization and technical supply conditions
NF EN 15092:2008 Robinetterie des bâtiments - Vannes mélangeuses en ligne d'alimentation en eau chaude - Essais et exigences
NF E39-013:2014 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
NF E39-013/IN1:2014 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
NF P43-040*NF EN 15092:2008 Building valves - Inline hot water supply tempering valves - Tests and requirements
FD A91-231-4*FD CEN/TR 15339-4:2015 Thermal spraying - Safety requirements for thermal spraying equipment - Part 4 : gas and liquid fuel supply
FD CEN/TR 15339-4:2015 Projection thermique - Exigences de sécurité relatives au matériel de projection thermique - Partie 4 : alimentation en gaz et en combustible liquide
NF E39-014:2009 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.
NF EN 834:2013 Répartiteurs de frais de chauffage pour déterminer la consommation des corps de chauffe - Appareils dotés d'une alimentation en énergie électrique
NF EN ISO 14919:2015 Projection thermique - Fils, baguettes et cordons pour projection thermique à l'arc et au pistolet dans une flamme - Classification - Conditions techniques d'approvisionnement
NF ISO 19659-2:2020 Applications ferroviaires - Systèmes de chauffage, ventilation et climatisation pour le matériel roulant - Partie 2 : confort thermique
NF V03-027*NF EN ISO 20836:2021 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers
NF EN ISO 20836:2021 Microbiologie de la chaîne alimentaire - Réaction de polymérisation en chaîne (PCR) pour la recherche de micro-organismes - Essais de performance thermique des thermocycleurs
NF D30-003:1992 Heating. Gas. Liquid fuels, gaseous fuel. Double hot water central heating boilers. Determination of hot water production system parameters necessary for application of the heat rules.

HU-MSZT, supply heat meter

ES-UNE, supply heat meter

UNE-EN ISO 12670:2016 Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011)
UNE-CEN/TR 15339-4:2014 Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply (Endorsed by Asociación Española de Normalización in October of 2021.)
UNE-EN ISO 20836:2022 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers (ISO 20836:2021)

YU-JUS, supply heat meter

JUS M.E6.302-1987 Gas burning appliances for instantaneous production of hot vvater for domestic use. Technical require-ments

Association of German Mechanical Engineers, supply heat meter

VDI 2077 Blatt 3.2-2013 Energy consumption accounting for the building services - Heat and hot-water supply installations - Cost allocation in connected installations
VDI 2055-1994 Thermal insulation for heated and refrigerated industrial and domestic installations - Calculations, guarantees, measuring and testing methods, quality assurance, supply conditions

Beijing Provincial Standard of the People's Republic of China, supply heat meter

DB11/T 1912-2021 Capacity building of professional emergency rescue team Standardized heating
DB11/T 1857-2021 Cleaner Production Evaluation Index System Electricity, Heat Production and Supply Industry
DB11/T 1784-2020 CO2 Emissions Accounting and Reporting Requirements for the Heat Production and Supply Industry

American Society for Testing and Materials (ASTM), supply heat meter

ASTM A385/A385M-09 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM E2211-02 Standard Specification for Relationship Between a Person (Consumer) and a Supplier of an Electronic Personal (Consumer) Health Record
ASTM C1695-10 Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service
ASTM D5335-04 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gages
ASTM D5335-99 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gages
ASTM D5335-08 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges

Professional Standard - Construction Industry, supply heat meter

JGJ 319-2013 Technical specification for heating systems of low temperature electric radiant heating film
JGJ/T 479-2019 Application technical standard for low temperature radiation self-limiting temperature electric heater heating system

Heilongjiang Provincial Standard of the People's Republic of China, supply heat meter

DB23/T 1203-2020 Application technical specification for low temperature radiant electric heating film heating system

Compressed Gas Association (U.S.), supply heat meter

CGA G-6.5-2013 Standard for small stationary insulated carbon dioxide supply systems

AT-ON, supply heat meter

ONORM B 2235 Teil.1-1974 Plants for central heating and central bot water supply; specifications in contracts for materials and labour
ONORM M 5614-1981 Zinc coatings on steel tubes; hot-dip galvanized zinc-coatings on supply steel pipes
ONORM B 2235 Teil.2-1969 Civil Engineering-Building; Standard for the Formulation of Contracls for Material and Labour; Plants for Central Healing and Central Hot Water Supply.

未注明发布机构, supply heat meter

NB 20484-2018 Thermal balance test of nuclear steam supply system of pressurized water reactor nuclear power plant
BS 7074-1:1989(1999) Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems — Part 1 : Code of practice for domestic heating and hot water supply
DIN EN 834:1994 Heat cost allocator for recording DIN consumption values of room heating surfaces – devices with an electrical energy supply
BS 6144:1990(1999) Specification for Expansion vessels using an internal diaphragm, for unvented hot water supply systems
BS ISO 5660-1:2015+A1:2019(2021) Reaction - to - fire tests — Heat release, smoke production and mass loss rate Part 1 : Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)

国家能源局, supply heat meter

NB/T 20484-2018 Thermal balance test of nuclear steam supply system of pressurized water reactor nuclear power plant
NB/T 42141-2017 Guidelines for the design and application of reactive power compensation devices for submerged arc furnace power supply systems

Gansu Provincial Standard of the People's Republic of China, supply heat meter

DB62/T 2874-2018 General technical requirements for household biomass fuel heating application systems

国家认证认可监督管理委员会, supply heat meter

RB/T 123-2018 Energy Management System_Certification Requirements for Heat Production and Supply Enterprises

Institute of Electrical and Electronics Engineers (IEEE), supply heat meter

ANSI/IEEE Std 668-1987 IEEE Recommended Practice for Electrical Heating Applications to Melting Furnaces and Forehearths in the Glass Industry

Ningxia Provincial Standard of the People's Republic of China, supply heat meter

DB64/T 1056-2023

American Society of Mechanical Engineers (ASME), supply heat meter

ASME 2231-2001 Use of SA-249 Tubes in Firetube Hot Water Heating or Hot Water Supply Boilers Section IV (ANNULLED) (SUPP 12)
ASME SEC II A SA-557/SA-557M-2001 Specification for Electric-Resistance-Welded Carbon Steel Feedwater Heater Tubes ASTM A557/A557M-90a
ASME SEC II A SA-688/SA-688M-2001 Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes ASTM A688/A688M-98
ASME SEC II A SA-556/SA-556M-2001 Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes ASTM A556/A556M-90a (R1995) E1
ASME SEC II A SA-803/SA-803M-2003 Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes ASTM A 803/A 803M-96

API - American Petroleum Institute, supply heat meter

API RP 550 P1 S11-1965 Manual on Installation of Refinery Instruments and Control Systems Part I-Process Instrumentation and Control Section 11-Electrical power supply (Second Edition)
API RP 550 P1 S11-1981 Manual on Installation of Refinery Instruments and Control Systems Part 1-Process Instrumentation and Control Section 11-Eiectrical Power Supply (THIRD EDITION)

AENOR, supply heat meter

UNE-EN 834:2014 Heat cost allocators for the determination of the consumption of room heating radiators - Appliances with electrical energy supply
UNE-EN ISO 14232-1:2017 Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017)
UNE-EN 14989-2:2011 Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances
UNE 60670-5:2014 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 5: Housing for meters installation.
UNE-EN ISO 14919:2015 Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015)

KR-KS, supply heat meter

KS M ISO 9631-2018 Rubber seals — Joint rings for pipelines for hot-water supply up to 110 ℃ — Specification for the material

International Organization for Standardization (ISO), supply heat meter

ISO/CD 19967-3 Air to water Heat pumps — Testing and rating for performance — — Part 3: Combined hot water supply and space heating and/or space cooling
ISO 14919:2023 Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification and technical supply conditions
ISO/TS 14934-1:2002 Reaction-to-fire tests - Calibration and use of radiometers and heat flux meters - Part 1: General principles

Professional Standard - Chemical Industry, supply heat meter

HG/T 3097-2006 Rubber seals Jonit rings for pipelines for hot-water supply up to 110℃. Specification for the materials

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, supply heat meter

GB/T 27572-2011 Rubber seals.Joint rings for pipelines for hot-water supply up to 110 ℃.Specification for the materials

ES-AENOR, supply heat meter

UNE 36-130-1991