ZH
RU
ES

Rated voltage test and acceptance method

Rated voltage test and acceptance method, Total:495 items.

In the international standard classification, Rated voltage test and acceptance method involves: Electrical wires and cables, Insulation, Electrical and electronic testing, Protection against fire, Refrigerating technology, Insulating materials, Electrical accessories, Protective equipment, Software development and system documentation, Vocabularies, Electricity. Magnetism. Electrical and magnetic measurements, Switchgear and controlgear, Aerospace electric equipment and systems, Earthworks. Excavations. Foundation construction. Underground works, Fluid power systems, Ventilators. Fans. Air-conditioners, Aerospace engines and propulsion systems, Railway rolling stock, Insulating fluids, Fuels, Products of the textile industry, Test conditions and procedures in general, Installations in buildings, Non-ferrous metals, Plastics, Products of the chemical industry, Analytical chemistry, Aerospace fluid systems and components, Compressors and pneumatic machines, Earth-moving machinery, Pipeline components and pipelines, Power stations in general, TESTING, Construction materials, Semi-manufactures of timber, Aerosol containers, Solar energy engineering, Power transmission and distribution networks, Transformers. Reactors, Rectifiers. Convertors. Stabilized power supply, Iron and steel products, Measurement of force, weight and pressure, Soil quality. Pedology, Industrial automation systems, Footwear, Non-textile floor coverings, Equipment for the chemical industry, Wood, sawlogs and sawn timber, Domestic, commercial and industrial heating appliances, Crude petroleum, Powder metallurgy, Inorganic chemicals, Aids for disabled or handicapped persons, Lubricants, industrial oils and related products, Water quality, Components and accessories for telecommunications equipment, Particle size analysis. Sieving.

International Electrotechnical Commission (IEC), Rated voltage test and acceptance method

IEC 63294:2021 Test methods for electric cables with rated voltages up to and including 450/750 V
IEC 61442:2005 Test methods for accessories for power cables with rated voltages from 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV)
IEC 60245-2:1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
IEC 60840:1999 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (U<(Index)m> = 36 kV) up to 150 kV (U<(Index)m> = 170 kV) - Test methods and requirements
IEC 60245-2:1980 Rubber insulated cables of rated voltages up to and including 450/750 V. Part 2 : Test methods
IEC 60245-2:1998 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
IEC 61462:2007 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1000 V - Definitions, test methods, acceptance criteria and design recommendations
IEC 60227-2:1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
IEC 60227-2:2003 Polyvinyl chloride insulated cables of rated voltages up to and including450/750V-Part2:Test methods
IEC 60227-2:1997+AMD1:2003 CSV Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
IEC 63075:2019 Superconducting AC power cables and their accessories for rated voltages from 6 kV to 500 kV - Test methods and requirements
IEC 62067:2022 Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) - Test methods and requirements
IEC 62067:2022 RLV Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) - Test methods and requirements
IEC 60227-2:1997/COR1:1998 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods; Corrigendum 1
IEC 60245-2:1994/AMD2:1997 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods; Amendment 2
IEC 60227-2:1979 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 2 : Test methods
IEC 61442:2023 RLV Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
IEC 61442:2023 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
IEC 60245-2:1994/AMD1:1997 Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
IEC 60156:2018 RLV Insulating liquids - Determination of the breakdown voltage at power frequency - Test method
IEC 60156:2018 Insulating liquids - Determination of the breakdown voltage at power frequency - Test method
IEC 60811-1-3:2001 Common test methods for insulating and sheathing materials of electric and optical cables-Part 13:Methods for general application-Measurement for determining the density -Water absorption tests-Shrinkage test
IEC 61238-1:2003 Compression and mechanical connectors for power cables for rated voltages up to 30 kV (U<(Index)m>=36 kV) - Part 1: Test methods and requirements
IEC 60156:1995 Insulating liquids - Determination of the breakdown voltage at power frequency - Test method
IEC 60227-2:1997/AMD1:2003 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods; Amendment 1
IEC 60227-2/AMD2:1995 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods; Amendment 2
IEC 62772:2016 Composite hollow core station post insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V - Definitions, test methods and acceptance criteria
IEC 60227-2/AMD1:1985 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 2 : Test methods
IEC 63010-2:2017 Halogen-free thermoplastic insulated and sheathed flexible cables of rated voltages up to and including 300/300 V - Part 2: Test methods
IEC 60840:2004 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (U<(Index)m> = 36 kV) up to 150 kV (U<(Index)m> = 170 kV) - Test methods and requirements
IEC 60811-1-3:1985 Common test methods for insulating and sheathing materials of electric cables: part 1: methods for general application; section three: methods for determining the density, water absorption tests, shrinkage test
IEC 60811-1-3:1993 Insulating and sheathing materials of electric cables; common test methods; part 1: general application; section 3: methods for determining the density; water absorption tests; shrinkage test
IEC 62067:2001 Power cables with extruded insulation and their accessories for rated voltages above 150 kV (U<(Index)m> = 170 kV) up to 500 kV (U<(Index)m> = 550 kV) - Test methods and requirements
IEC 62231:2006 Composite station post insulators for substations with a.c. voltages greater than 1000 V up to 245 kV - Definitions, test methods and acceptance criteria
IEC 60885-3:1988 Electrical test methods for electric cables; part 3: test methods for partial discharge measurements on lengths of extruded power cable
IEC 60885-3:2015 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
IEC TS 62896:2015 Hybrid insulators for a.c. and d.c. for high-voltage applications - Definitions, test methods and acceptance criteria
IEC 62067/AMD1:2006 Amendment 1 - Power cables with extruded insulation and their accessories for rated voltages above 150 kV (U<(Index)m> = 170 kV) up to 500 kV (U<(Index)m> = 550 kV) - Test methods and requirements
IEC 60840:2020 RLV Power cables with extruded insulation and their accessories for rated voltages above 30 kV (U_m= 36 kV) up to 150 kV (U_m = 170 kV) - Test methods and requirements
IEC 61238-1-1:2018 Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors
IEC 60811-1-3/AMD1:2001 Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-3: General application - Methods for determining the density; Water absorption tests; Shrinkage test; Amendment 1
IEC 60811-1-3/AMD2:1993 Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section 3: methods for determining the density; water absorption tests; shrinkage test; amendment 2
IEC 62217:2012 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
IEC 61109:1992 Composite insulators for a.c. overhead lines with a nominal voltage greater than 1000 V; definitions, test methods and acceptance criteria
IEC 61196-1-119:2020 Coaxial communication cables - Part 1-119: Electrical test methods - RF average power rating
IEC 61196-1-119:2020 RLV Coaxial communication cables - Part 1-119: Electrical test methods - RF average power rating

Indonesia Standards, Rated voltage test and acceptance method

SNI 04-6271-2000 Test methods for power cables with extruded insulation for rated voltage above 30 kV (Um=36 kV) up to 150 kV (Um=170 kV)
SNI IEC 60245-2:2010 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
SNI 4144-2012 Metode uji penentuan faktor-faktor susut tanah
SNI 04-7022.1-2005 Insulators for overhead lines with a nominal voltage above 1000 V. Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria
SNI 04-6951.3-2003 Electrical test methods for electric cables. Part 3: Test methods for partial discharge measurement on lengths extruded power cables

Korean Agency for Technology and Standards (KATS), Rated voltage test and acceptance method

KS C IEC 61109:2004 Composite insulators for a.c. overhead lines with a nominal voltage greater than 1 000 V-Definitions, test methods and acceptance criteria
KS C IEC 61109:2014 Composite insulators for a.c. overhead lines with a nominal voltage greater than 1 000 V — Definitions, test methods and acceptance criteria
KS C IEC 61442-2006(2016) Electric cables－Test methods for accessories for power cables with rated voltages from 6 kV(Um＝7.2 kV) up to 30 kV(Um＝36 kV)
KS C IEC 61109:2018 Insulators for overhead lines — Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V — Definitions, test methods and acceptance criteria
KS C IEC 60245-2:2021 Rubber insulated cables — Rated voltages up to and including 450/750 V — Part 2: Test methods
KS C IEC 60245-2-2006(2016) Rubber insulated cables－Rated voltages up to and including 450/750 V－Part 2：Test methods
KS C IEC 61462:2014 Composite hollow insulators — Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V — Definitions, test methods, acceptance criteria and design recommendations
KS C IEC 61462:2018 Composite hollow insulators — Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V — Definitions, test methods, acceptance criteria and desi
KS C IEC 60245-2:2006 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2:Test methods
KS C IEC 62893-2:2020 Charging cables for electric vehicles of rated voltages up to and including 0.6/1 kV — Part 2: Test methods
KS C IEC 60227-2-2016(2021) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V－Part 2：Test methods
KS C IEC 60840:2006 Power cables with extruded insulation and their accessories for rated voltages above 30 kV(Um＝36 kV) up to 150 kV(Um＝170 kV)－Test methods and requirements
KS C IEC 60227-2:2006 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V-Part 2:Test methods
KS C IEC 60227-2:2016 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V－Part 2：Test methods
KS C IEC 61325:2020 Insulators for overhead lines with a nominal voltage above 1 000 V — Ceramic or glass insulator units for d.c. systems —Definitions, test methods and acceptance criteria
KS C IEC 61442:2021 Test methods for accessories for power cables with rated voltages from 6 kV(Um = 7.2 kV) up to 30 kV(Um = 36 kV)
KS C IEC 61238-1:2021 Compression and mechanical connectors for power cables for rated voltages up to 30 kV(Um = 36 kV) — Part 1: Test methods and requirements
KS C IEC 61442:2006 Electric cables－Test methods for accessories for power cables with rated voltages from 6 kV(Um＝7.2 kV) up to 30 kV(Um＝36 kV)
KS C IEC 60156-2003(2018) Insulating liquids－Determination of the breakdown voltage at power frequency－Test method
KS C IEC 61238-1:2006 Compression and mechanical connectors for power cables for rated voltages up to 30 kV(Um＝36 kV)－Part 1：Test methods and requirements
KS C IEC 61238-1-2006(2016) Compression and mechanical connectors for power cables for rated voltages up to 30 kV(Um＝36 kV)－Part 1：Test methods and requirements
KS C IEC 62231-2014(2019) Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV — Definitions, test methods and acceptance criteria
KS C IEC 60811-1-3:2002 Common test methods for insulating and sheathing materials of electric and optical cables－Part 1－3：General application－Methods for determining the density－Water absorption tests－Shrinkage test
KS C 0305-2014(2019) Test method of measurement for the electromagnetic wave absorbing effectiveness of planar electromagnetic wave absorbing materials
KS C IEC 60885-3:2003 Electrical test methods for electric cables－Part 3：Test methods for partial discharge measurements on lengths of extruded power cables
KS F 2541-2017(2022) Standard test method for determination of Aggregate-Crushing-Value(ACV)
KS P ISO 17190-7-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 7：Gravimetric determination of absorption under pressure
KS C IEC 62821-2-2014(2019) Halogen free low smoke thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V — Part 2: Test methods

ZA-SANS, Rated voltage test and acceptance method

SANS 61109:1992 Composite insulators for a.c. overhead lines with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
SANS 61462:2007 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations
SANS 60227-2:2006 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 2: Test methods
SANS 61442:2006 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
SANS 61238-1:2003 Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV) Part 1: Test methods and requirements
SANS 60811-1-3:2001 Common test methods for insulating and sheathing materials of electric and optical cables Part 1-3: General application - Methods for determining the density - Water absorption tests - Shrinkage test
SANS 62231:2006 Composite station post insulators for substations with a.c. voltages greater than 1000 V up to 245 kV - Definitions, test methods and acceptance criteria

FI-SFS, Rated voltage test and acceptance method

Group Standards of the People's Republic of China, Rated voltage test and acceptance method

T/CEC 444-2021 Test method for transition joints of DC cables with rated voltage 60kV and below
T/GDAQI 90.2-2022 Halogen free polyolefin insulated cable of rated voltages up to and including 450/750V—Part 2: Test methods
T/ZZB 0154.1-2016 Power cables with cross-linked polyethylene insulation for rated voltage of 220kV(Um=252kV)—Part 1: Test methods and requirements
T/ZZB 0165.1-2016 D.C.extruded cable for power transmission at a rated voltage up to and including 320kV—Part 1: Test methods and requirements
T/CEEIA 306-2018 Cold dielectric（CD）high temperature superconducting（HTS）power cables and their accessories for rated voltages from 6 kV（Um=7.2kV） to 35 kV（Um=40.5kV） – test methods and requirements
T/ZZB 024.1-2015 Long AC submarine cables with cross–linked polyethylene insulation for rated voltage of 220 kV(Um=252 kV)-Part 1:Test methods and requirements

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Rated voltage test and acceptance method

GB/T 18889-2002 Electric cables--Test methods for accessories for power cables with rated voltages from 6kV(Um=7.2kV)up to 35kV(Um=40.5kV)
GB 5013.2-1997 Rubber insulated cables of rated voltages up to and including 450/750V. Part 2: Test methods
GB/T 5013.2-2008 Rubber insulated cables of rated voltages up to and including450/750 V.Part 2: Test methods
GB 5023.2-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 2: Test methods
GB/T 5023.2-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V.Part2:Test methods
GB/T 24218.12-2012 Textiles.Test methods for nonwovens.Part 12:Demand absorbency
GB/T 2951.3-1997 Common test methods for insulating and sheathing materials of electric cables. Part 1: Methods for general application. Section three: Methods for determining the density--Water absorption tests--Shrinkage test
GB/T 2951.13-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part13:Methods for general application.Measurement for determining the density.Water absorption tests.Shrinkage test
GB/T 9327-2008 Test methods and requirements for crimping and mechanical connecting fittings for conductors of power cables with rated voltage 35kV (Um=40.5kV) and below
GB/T 11017.1-2002 Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 110kV Part 1: Test methods and requirements
GB/T 31489.1-2015 D.C. extruded cable systems for power transmission at a rated voltage up to and including 500 kV.Part 1:Test methods and requirements
GB/T 22078.1-2008 Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 500kV(Um=550kV).Part 1:Power cable systems-cables with cross-linked polyethylene insulation and their acccessories for rated voltage of 500kV(Um=550kV).Test
GB/T 18890.1-2015 Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(U<下标m>=252 kV).Part 1: Test methods and requirements
GB/T 11017.1-2014 Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 110 kV(U<下标m>=126 kV).Part 1:Test methods and requirements
GB/T 25096-2010 Composite station post insulators for substations with AC voltages greater than 1000V.Definitions,test methods and acceptance riteria
GB/T 19519-2004 Composite insulators for a.c.overhead lines with a nominal voltage greater than 1000V---Definitions,test methods and acceptance criteria
GB/Z 18890.1-2002 Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220kV(Um=252kV) Part 1: Power cable systems--cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220kV(Um=252kV)--Te

Association Francaise de Normalisation, Rated voltage test and acceptance method

NF C33-005*NF EN 61442:2005 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
NF EN 50393:2015 Méthodes et prescriptions d'essai pour les accessoires de câbles de distribution de tension assignée 0,6/1,0 (1,2) kV
NF C66-333*NF EN 61462:2008 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations
NF C33-002:2006 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV.
NF C33-002*NF EN 50393:2015 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
NF EN 61952:2008 Isolateurs pour lignes aériennes - Isolateurs composites rigides à socle pour systèmes à courant alternatif de tension nominale supérieure à 1 000 V - Définitions, méthodes d'essais et critères d'acceptation
NF EN 61109:2009 Isolateurs pour lignes aériennes - Isolateurs composites de suspension et d'ancrage destinés aux systèmes à courant alternatif de tension nominale supérieure à 1 000 V - Définitions, méthodes d'essai et critères d'acceptation
NF C32-102-2/A1:2003 Cables of rated voltage up to and including 450/750 V and having cross-linked insulation - Part 2 : test methods.
NF C32-201-2/A1:2003 Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation - Part 2 : test methods.
NF EN 60383-1:1997 Isolateurs pour lignes aériennes de tension nominale supérieure à 1 kV - Partie 1 : éléments d'isolateurs en matière céramique ou en verre pour systèmes à courant alternatif. Définitions, méthodes d'essai et critères d'acceptation.
NF E48-362*NF ISO 17559:2004 Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics
NF C66-031*NF EN 62231:2007 Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria
NF EN 60383-1/A11:2001 Isolateurs pour lignes aériennes de tension nominale supérieure à 1 kV - Partie 1 : élements d'isolateurs en matière céramique ou en verre pour systèmes à courant alternatif - Définitions, méthodes d'essai et critères d'acceptation
NF C33-038-1*NF EN 61238-1:2003 Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Part 1 : test methods and requirements.
NF C27-221*NF EN 60156:1995 Insulating liquids. Determination of the breakdown voltage at power frequency. Test method.
NF L50-150-501*NF EN 6059-501:2010 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501 : voltage proof test
NF C33-002/A1:2003 Insulated cables and their accessories for power systems - Accessories of distribution cables of rated voltage 0,6/1 (1,2) kV - Test methods and requirements.
NF X45-302:2000 Filter cartridges - Test methods - Determination of differential pressure versus flowrate.
NF C32-049-3*NF EN 60885-3:2015 Electrical test methods for electric cables - Part 3 : test methods for partial discharge measurements on lengths of extruded power cables
NF C32-026/A1:2001 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-3 : general application - Methods for determining the density - Water absorption tests - Shrinkage test.
NF C32-026:1996 Insulating and sheathing materials of electric cables. Common test methods. Part 1 : general application. Section 3 : methods for determining the density. Water absorption tests. Shrinkage test.
NF EN 62772:2016 Isolateurs supports composites creux pour postes présentant une tension alternative supérieure à 1 000 V et une tension continue supérieure à 1 500 V - Définitions, méthodes d'essai et critères d'acceptation
NF EN IEC 60331-1:2019 Essais pour câbles électriques soumis au feu - Intégrité des circuits Partie 1 : méthode d'essai au feu avec chocs pour les câbles de tension assignée au plus égale à 0,6/1,0 kV et de diamètre externe supérieur à 20 mm, à une température...
NF C66-217:2006 Polymeric insulators for indoor and outdoor use with a nominal voltage greater than 1 000 V - General definitions, test methods and acceptance criteria
NF EN 13872:2004 Méthode d'essai pour les mortiers de lissage et/ou d'égalisation - Détermination du retrait
NF EN IEC 61482-1-1:2019 Travaux sous tension - Vêtements de protection contre les dangers thermiques d'un arc électrique Partie 1-1 : méthodes d'essai - Méthode 1 : détermination de la valeur assignée d'arc (ELIM, ATPV et/ou EBT) des matériaux pour vêtements et des...

British Standards Institution (BSI), Rated voltage test and acceptance method

BS EN 61442:2005 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
BS EN 61462:2007 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1000 V. Definitions, test methods, acceptance criteria and design recommendations
20/30413819 DC BS EN IEC 63294. Test methods for electric cables with rated voltages up to and including 450/750 V
BS EN 50393:2006 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
21/30390465 DC BS EN IEC 61462. Composite hollow insulators. Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V. Definitions, test methods, acceptance criteria and design recommendations
BS EN 50393:2015 Tracked Changes. Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
BS 7888-2:1998 LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV) - Methods of test
IEC 61462:2023 Composite hollow insulators. Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V. Definitions, test methods, acceptance criteria and design…
BS EN 63075:2019 Superconducting AC power cables and their accessories for rated voltages from 6 kV to 500 kV. Test methods and requirements
BS IEC 62895:2017 High voltage direct current (HVDC) power transmission. Cables with extruded insulation and their accessories for rated voltages up to 320 kV for land applications. Test methods and requirements
BS EN 60811-1-3:1995 Insulating and sheathing materials of electric cables - Common test methods - General application - Methods for determining the density - Water absorption tests - Shrinkage test - Section 3: Methods for determining the density - Water absorption tests - S
BS EN 61238-1:2003 Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Test methods and requirements
BS ISO 17559:2004 Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics
BS EN 62231:2007 Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria
21/30443331 DC BS IEC 61442. Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
BS EN 60885-3:2003 Electrical test methods for electric cables - Test methods for partial discharge measurements on lengths of extruded power cables
BS IEC 61196-1-119:2020 Coaxial communication cables. Electrical test methods. RF average power rating
BS ISO 14085-4:2015 Aerospace series. Hydraulic filter elements. Test methods. Verification of collapse/burst pressure rating
BS 6911-11:1997 Testing earth-moving machinery - Method for the determination of volumetric ratings for hydraulic excavator buckets and backhoe loader buckets
BS 6622:2007 Electric cables - Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV - Requirements and test methods
BS 2782-11 Method 1121B:1997 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Metric series
BS EN 14617-15:2005 Agglomerated stone - Test methods - Determination of compressive strength
BS EN 772-1:2011 Methods of test for masonry units. Determination of compressive strength
20/30417882 DC BS IEC 62067. Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV). Test methods and requirements
19/30397210 DC BS IEC 60840. Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV). Test methods and requirements
BS EN 62217:2006 Polymeric insulators for indoor and outdoor use with a nominal voltage greater than 1000 V. General definitions, test methods and acceptance criteria
BS EN 16094:2012 Laminate floor coverings. Test method for the determination of micro-scratch resistance
21/30442902 DC BS EN IEC 60840 AMD1. Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV). Test methods and requirements
BS EN 60885-3:2015 Tracked Changes. Electrical test methods for electric cables. Test methods for partial discharge measurements on lengths of extruded power cables
BS EN 62772:2016 Composite hollow core station post insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V. Definitions, test methods and acceptance criteria
19/30329561 DC BS IEC 63026. Submarine power cables with extruded insulation and their accessories for rated voltages from 6 kV (Um = 7,2 kV) up to 60 kV (Um = 72,5 kV). Test methods and requirements

Professional Standard - Aerospace, Rated voltage test and acceptance method

QJ 1323.28-1987 Electromagnetic relay test method rated load life test
QJ 1323.25-1987 Electromagnetic relay test method action and release voltage test
QJ 519-1992 Test methods and acceptance rules for printed circuit board qualification
QJ 519-1981 Test methods and acceptance rules for printed circuit board qualification

CZ-CSN, Rated voltage test and acceptance method

CSN 34 7614-2-2000 Overhead distribution cables of rated voltage U0IU (Um): 0,6/1 (1,2) kV -Part 2: Additional test methods
CSN 34 7470-2 ZA11-1998
CSN 34 7470-2 ZA10-1998
CSN 34 7410-2 ZA11-1998
CSN 34 7470-2-1999 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
CSN 34 7470-2-1995 Rubber insulated cables of rated voltages up to and including 450/750 V. Part 2: Test methods
CSN 34 8042-1982 Ceramic insulators. Porcelain bushings for voltages to 35 kV. Acceptance criteria. Methods for tests
CSN 34 6471-1986 Test methods for electric insulating materials. Test method for determination of resistance insulating materials to high-voltage arc
CSN 34 7410-2 ZA13-1998
CSN 34 7410-2-1995 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 2: Test methods
CSN 34 7410-2-1999 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -Part 2: Test methods
CSN 34 6467-1986 Test method for determination of resistance of insulating materials to low-voltage, high-current d.c. arc
CSN 34 7005 Z2-2005
CSN 34 8032-1982 Ceramic insulators.Porcelain post insolators for voltages above 1000 V.Acceptance criteria.Metojjods for tests

American Society for Testing and Materials (ASTM), Rated voltage test and acceptance method

ASTM F1959/F1959M-05a Standard Test Method for Determining the Arc Thermal Performance Value of Materials for Clothing
ASTM F1959/F1959M-06 Standard Test Method for Determining the Arc Rating of Materials for Clothing
ASTM F1959/F1959M-06a Standard Test Method for Determining the Arc Rating of Materials for Clothing
ASTM F1959/F1959M-99 Standard Test Method for Determining the Arc Thermal Performance Value of Materials for Clothing
ASTM F1959/F1959M-22 Standard Test Method for Determining the Arc Rating of Materials for Clothing
ASTM F1959/F1959M-13 Standard Test Method for Determining the Arc Rating of Materials for Clothing
ASTM F1959/F1959M-14 Standard Test Method for Determining the Arc Rating of Materials for Clothing
ASTM F1959/F1959M-14e1 Standard test method for determination of arc ratings of clothing materials
ASTM F1959/F1959M-23 Standard Test Method for Determining the Arc Rating of Materials for Clothing
ASTM F2178-17(2017) Standard Test Method for Determining The Arc Rating Of Face Protective Products
ASTM F2178-02 Standard Test Method for Determining The Arc Rating Of Face Protective Products
ASTM F2675/F2675M-19 Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection
ASTM F2675/F2675M-19e1 Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection
ASTM D909-21 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
ASTM D909-07 Standard Test Method Supercharge Rating of Spark-Ignition Aviation Gasoline
ASTM D909-22 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
ASTM F2675/F2675M-23 Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection
ASTM D427-98 Test Method for Shrinkage Factors of Soils by the Mercury Method
ASTM F2178-06 Standard Test Method for Determining the Arc Rating and Standard Specification for Face Protective Products
ASTM F2178-08 Standard Test Method for Determining the Arc Rating and Standard Specification for Face Protective Products
ASTM E1834-96(2002) Standard Test Method for Determination of Lead in Nickel Alloys by Electrothermal Atomic Absorption Spectrometric Method
ASTM E1834-96 Standard Test Method for Determination of Lead in Nickel Alloys by Electrothermal Atomic Absorption Spectrometric Method
ASTM D1389-97a Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ASTM E2050-99 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method
ASTM E2050-99(2004) Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method
ASTM E2050-12 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Spectrometry
ASTM D6647-01(2011) Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption
ASTM D6647-18 Standard Test Method for Determination of Acid Soluble Iron via Atomic Absorption
ASTM D5591-22 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM F2261-06(2011) Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type
ASTM F2261-06 Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type
ASTM F716-07 Standard Test Methods for Sorbent Performance of Absorbents
ASTM D5080-20 Standard Test Method for Rapid Determination of Percent Compaction
ASTM D5080-17 Standard Test Method for Rapid Determination of Percent Compaction
ASTM D3070-00(2005) Standard Test Method of Rapid Pressure Determination of Pressurized Products
ASTM D3070-00 Standard Test Method of Rapid Pressure Determination of Pressurized Products
ASTM D1816-12(2019) Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes
ASTM F2675/F2675M-13 Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection
ASTM C1214-19 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
ASTM E1830-04 Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules
ASTM E1830-09 Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules
ASTM E2142-01 Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
ASTM E1719-05 Standard Test Method for Vapor Pressure of Liquids by Ebulliometry
ASTM E1719-97 Standard Test Method for Vapor Pressure of Liquids by Ebulliometry
ASTM E1719-12 Standard Test Method for Vapor Pressure of Liquids by Ebulliometry
ASTM D3237-97 Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy
ASTM D4943-18 Standard Test Method for Shrinkage Factors of Cohesive Soils by the Water Submersion Method
ASTM D3237-22 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM D877-02e1 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D877-02 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D877/D877M-19 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D877-02(2007) Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D3070-00(2010) Standard Test Method of Rapid Pressure Determination of Pressurized Products
ASTM D877-00 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D877-87(1995) Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D3635-13(2021) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
ASTM D4974-99 Standard Test Method for Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM D4739-06 Standard Test Method for Base Number Determination by Potentiometric Titration
ASTM D4739-96 Standard Test Method for Base Number Determination by Potentiometric Titration
ASTM D4739-05 Standard Test Method for Base Number Determination by Potentiometric Titration
ASTM D473-81(1995)e2 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
ASTM D4739-08 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
ASTM D4739-02 Standard Test Method for Base Number Determination by Potentiometric Titration
ASTM D4739-08e1 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
ASTM D4739-11 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
ASTM D4739-06a Standard Test Method for Base Number Determination by Potentiometric Titration
ASTM B342-63(1980)e1 Test Method for Electrical Conductivity by Use of Eddy Currents
ASTM F2675/F2675M-22 Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection
ASTM F2675/F2675M-21 Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection
ASTM F2675/F2675M-22e1 Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection
ASTM B922-02 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM B922-17 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM E1852-96(2001) Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Electrothermal Atomic Absorption Spectrometry
ASTM D6377-99 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCR_x (Expansion Method)
ASTM C1214M-94(2000) Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
ASTM C1214M-19 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
ASTM D877/D877M-13 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM C1214-02 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
ASTM C1214-02(2009) Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
ASTM C1214-13 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
ASTM D2782-02(2014) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids 40;Timken Method41;
ASTM F1662-10 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch
ASTM F1662-03 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch
ASTM D3831-22 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
ASTM E1898-07 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry
ASTM D7575-10e1 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
ASTM E1037-84(1996)e1 Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM E1107-10 Standard Test Method for Measuring the Throughput of Resource-Recovery Unit Operations
ASTM E1037-84(2009) Standard Test Method for Measuring Particle Size Distribution of RDF-5

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Rated voltage test and acceptance method

ASHRAE 51-1999 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating AMCA Standard 210-99; Interpretation IC 51-1999-1: 02/18/2000; Interpretation IC 51-1999-02: 09/12/2000; Addendum A:2001; Errata 01/10/2006; Errata 02/15/2006
ASHRAE 116-1995 Methods of Testing for Rating Seasonal Efficiency of Unitary Air Conditioners and Heat Pumps
ASHRAE 37 ERTA-2012 Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment

RU-GOST R, Rated voltage test and acceptance method

GOST R IEC 227-2-1994 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Test methods
GOST R IEC 60245-2-2002 Rubber insulated cables of rated voltages up to and including 450/750 V. Test methods
GOST IEC 60245-2-2011 Rubber insulated cables of rated voltages up to and including 450/750 V. Test methods
GOST 17441-1984 Electrical contact connections. Acceptance and methods of tests
GOST 25258-1982 Electrometric measurement means. Acceptance rules and test methods
GOST 26748-1985 Low voltage complete devices. Acceptage rules. Methods of tests
GOST R IEC 60227-2-1999 Polyvinylchloride insulated cables of rated voltages up to and including 450/750 V. Part 2. Test methods
GOST R 51155-1998 Line accessories. Acceptance rules and methods of tests
GOST 2744-1979 Line accessories. Acceptance rules and methods of tests
GOST IEC 60811-1-3-2011 Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-3. General application methods. Methods for determining the density. Water absorption tests. Shrinkage test
GOST IEC 60227-2-2012 Polyvinylchloride insulated cables of rated voltages up to and including 450/750V. Part 2. Test methods
GOST 8554-1989 Fire equipment. Motor-pomps. Acceptance and test methods
GOST 12175-1990 Common test methods insulating and sheathing materials of electric cables. Methods for determining the density. Water absorption and shrinkage tests
GOST 12268-1979 Electrical insulating board. Methods for determination of test voltage resistance, surface discharge resistance and compressibility under pressure
GOST 20073-1981 General-purpose stationary air piston compressors. Acceptance rules and methods of tests
GOST R IEC 62067-2017 Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV). Test methods and requirements
GOST R IEC 60840-2017 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV). Test methods and requirements
GOST 25862-1983 Constant speed electrical actuators for remote control. Acceptance rules and methods of tests
GOST R 57491-2017 Footwear. Test methods for outsoles. Determination of compression energy

European Committee for Electrotechnical Standardization（CENELEC）, Rated voltage test and acceptance method

EN 50393:2015 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
EN 61462:2007 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations
EN IEC 61462:2023 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V - Definitions, test methods, acceptance criteria and design recomme...
HD 22.2 S2/A11-1995 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods
HD 22.2 S2/ A9-1993 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods
HD 22.2 S2/A10-1995 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods
EN 61442:2005 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
HD 22.2 S2/ A6-1992 AMD 6 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods
HD 22.2 S2/ A7-1992 AMD 7 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods
HD 22.2 S2/ A5-1992 AMD 5 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods
HD 505.1.3 S1-1988 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application Section Three - Methods for Determining the Density - Water Absorption Tests - Shrinkage Test
HD 505.1.3 S2-1991 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application Section Three - Methods for Determining the Density Water Absorption Tests - Shrinkage Test
EN 62231:2006 Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria
EN 60885-3:2015 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
HD 22.2 S2-1992 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods (Reprint Incorporating A1 to A4)

Danish Standards Foundation, Rated voltage test and acceptance method

DS/EN 50393:2006 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
DS 2393-2:1996 Polyvinyl chloride insulated sheathed cables of rated voltages up to and including 450/750 V - Test methods
DS/EN 61462:2008 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations
DS/HD 22.2 S2+A5-A9:1995 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
DS/EN 61442:2005 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
DS/HD 21.2 S2:1994 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
DS/EN 60156:1996 Insulating liquids - Determination of the breakdown voltage at power frequency - Test method
DS/IEC 60840:2012 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements
DS/IEC 60840:2021 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV) – Test methods and requirements
DS/EN 1534:2011 Wood flooring - Determination of resistance to indentation - Test method
DS/EN 61238-1:2004 Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Part 1: Test methods and requirements
DS/EN 60885-3:2007 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
DS/EN 62231:2007 Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria
DS/IEC 62067:2012 Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) - Test methods and requirements

Lithuanian Standards Office , Rated voltage test and acceptance method

LST EN 50393-2006 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
LST EN 61462-2008 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations (IEC 61462:2007)
LST EN 1534-2011 Wood flooring - Determination of resistance to indentation - Test method
LST EN 61442-2005 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV) (IEC 61442:2005, modified)

AENOR, Rated voltage test and acceptance method

UNE-EN 50393:2015 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
UNE-EN 61462:2008 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations.
UNE-EN 61442:2005 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
UNE-EN 1534:2011 Wood flooring - Determination of resistance to indentation - Test method
UNE 211067-1:2017 Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 400 kV (Um = 420 kV). Part 1: Test methods and requirements.
UNE 211632-1:2017 Power cables with extruded insulation and their accessories for rated voltages above 36 kV (Um = 42 kV) up to 150 kV (Um = 170 kV). Part 1: Requirements and test methods

KR-KS, Rated voltage test and acceptance method

KS C IEC 61462-2018(2023) Composite hollow insulators — Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V — Definitions, test methods, acceptance criteria and desi
KS C IEC 61109-2018 Insulators for overhead lines — Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V — Definitions, test methods and acceptance criteria
KS C IEC 60245-2-2021 Rubber insulated cables — Rated voltages up to and including 450/750 V — Part 2: Test methods
KS C IEC 61462-2018 Composite hollow insulators — Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V — Definitions, test methods, acceptance criteria and desi
KS C IEC 62893-2-2020 Charging cables for electric vehicles of rated voltages up to and including 0.6/1 kV — Part 2: Test methods
KS C IEC 60227-2-2016 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V－Part 2：Test methods
KS C IEC 61325-2020 Insulators for overhead lines with a nominal voltage above 1 000 V — Ceramic or glass insulator units for d.c. systems —Definitions, test methods and acceptance criteria
KS C IEC 61442-2021 Test methods for accessories for power cables with rated voltages from 6 kV(Um = 7.2 kV) up to 30 kV(Um = 36 kV)
KS C IEC 61238-1-2021 Compression and mechanical connectors for power cables for rated voltages up to 30 kV(Um = 36 kV) — Part 1: Test methods and requirements
KS C IEC 60840-2018(2023) Power cables with extruded insulation and their accessories for rated voltages above 30 kV(Um = 36 kV) up to 150 kV(Um = 170 kV) — Test methods and requirements
KS C IEC 60156-2003(2023) Insulating liquids－Determination of the breakdown voltage at power frequency－Test method

European Committee for Standardization (CEN), Rated voltage test and acceptance method

EN 50393:2006 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV :2000
HD 22.2 S2 A5-1992 Rubber insulated cables of rated voltages up to and including 450/750 V; part 2: test methods
HD 22.2 S2 A6-1992 Rubber insulated cables of rated voltages up to and including 450/750 V; part 2: test methods
HD 22.2 S2 A7-1992 Rubber insulated cables of rated voltages up to and including 450/750 V; part 2: test methods
HD 21.2 S2-1990 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V; part 2: test methods
HD 21.2 S2 A2-1990 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V; part 2: test methods
HD 21.2 S2 prA3-1992 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V; part 2: test methods
HD 21.2 S2 prA4-1992 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V; part 2: test methods
HD 22.2 S2 prA7-1991 Rubber insulated cables of rated voltages up to and including 450/750 V; part 2: test methods (IEC 245-2:1980; modified)

German Institute for Standardization, Rated voltage test and acceptance method

DIN EN 50393:2006 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV; German version EN 50393:2006
DIN EN 61325:1996 Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria (IEC 61325:1995); German version EN 61325:1995
DIN EN 61442:2006 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV) (IEC 61442:2005, modified); German version EN 61442:2005
DIN 7738:1959-09 Laminated Products; Vulcanized Fibre, Acceptance, Test Methods
DIN EN 61462:2008 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1000 V - Definitions, test methods, acceptance criteria and design recommendations (IEC 61462:2007); German version EN 6
DIN VDE 0282-2:2003 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 2: Test methods (IEC 60245-2:1994, modified); German version HD 22.2 S3:1997 + A1:2002
DIN EN 2591-208:1998 Aerospace series - Elements of electrical and optical connection; test methods - Part 208: Temperature rise due to rated current; German version EN 2591-208:1996
DIN 24567:1998 Fluid power - Round hydraulic reservoirs made of steel - Dimensions, requirements, test method - Nominal capacity 1000 to 20000
DIN EN 60156:1996 Insulating liquids - Determination of the breakdown voltage at power frequency - Test method (IEC 60156:1995); German version EN 60156:1995
DIN VDE 0380-5:1995 Insulating liquids - Determination of the partial discharge inception voltage (PDIV) - Test methods (IEC/TR3 61294:1993)(Report)
DIN EN 62217 Berichtigung 1:2007 Polymeric insulators for indoor and outdoor use with a nominal voltage 1000 V - General definitions, test methods and acceptance criteria (IEC 62217:2005); German version EN 62217:2006, Corrigenda to DIN EN 62217 (VDE 0441-1000):2006-11; German v
DIN VDE 0281-2:2003 Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation - Part 2: Test methods (IEC 60227-2:1979, modified); German version HD 21.2 S3:1997 + A1:2002
DIN EN 62231:2007 Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria (IEC 62231:2006); German version EN 62231:2006
DIN EN 61238-1:2004 Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Part 1: Test methods and requirements (IEC 61238-1:2003); German version EN 61238-1:2003
DIN EN 50393:2015 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV; German version EN 50393:2015
DIN EN 2591-202:1998 Aerospace series - Elements of electrical and optical connection; test methods - Part 202: Contact resistance at rated current; German version EN 2591-202:1996
DIN 52009:2013-10 Test methods for aggregates - Determination of water absorption under pressure
DIN 52009:2006 Test methods for aggregates - Determination of water absorption under pressure
DIN EN 60885-3:2004 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables (IEC 60885-3:1988); German version EN 60885-3:2003
DIN 51911:1997 Testing of carbon materials - Determination of specific electrical resistance by the current-voltage method - Solid matters

TH-TISI, Rated voltage test and acceptance method

TIS 955.2-2010 Rubber insulated cables.rated voltages up to and including 450/750 v.part 2: test methods
TIS 11.2-2010 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 v.part 2: test methods

Taiwan Provincial Standard of the People's Republic of China, Rated voltage test and acceptance method

CNS 14796-2-2004 Rubber insulated cables-rated voltages up to and including 450/750V Part 2：Test methods
CNS 14796.2-2004 Rubber insulated cables-rated voltages up to and including 450/750V Part 2：Test methods

RO-ASRO, Rated voltage test and acceptance method

STAS SR HD 22.2 S2+A5+A6+A7+A8+A9-1995 Rubber insuiated cables of ra?ed voltages up ?o and including 480/750 Part 2: Tas? methods
STAS 3686/4-1974 CIRCUIT-BREAKERS FOR ALTERNANTING VOLTAGES ABOVE 1 kV Methods for temperature rise tests under nominal duty conditions
STAS SR CEI 885-3-1988 Electrical test methods for electric cables Part 3: Test methods for partial discharge measurements on length of extruded power cable.
STAS 11057-1978 Electrical equipment for motor vehicles WORKING VOLTAGES FOR LIGHTS FITTED TO MOTOR VEHICLES ANDTO THEIR TRAILERS Requested values and test methods

Japanese Industrial Standards Committee (JISC), Rated voltage test and acceptance method

JIS C 3663-2:1998 Rubber insulated cables -- Rated voltages up to and including 450/750 V -- Part 2: Test methods
JIS C 3662-2:2009 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 2: Test methods
JIS C 3662-2:1998 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 2: Test methods
JIS C 3663-2:2003 Rubber insulated cables -- Rated voltages up to and including 450/750 V -- Part 2: Test methods
JIS C 3662-2:2003 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 2: Test methods
JIS C 3660-1-3:1998 Common test methods for insulating and sheathing materials of electric cables -- Part 1: General application -- Section 3: Methods for determining the density -- Water absorption tests -- Shrinkage test
JIS C 3660-1-3:2003 Common test methods for insulating and sheathing materials of electric and optical cables -- Part 1-3: Methods for general application -- Methods for determining the density -- Water absorption tests -- Shrinkage test

VN-TCVN, Rated voltage test and acceptance method

TCVN 6610-2-2007 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V.Part 2: Test methods
TCVN 5935-2-2013 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV).Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
TCVN 6614-1-3-2008 Common test methods for insulating and sheathing materials of electric cables and optical cables.Part 1-3: General application.Methods for determining the density.Water absorption tests.Shrinkage test
TCVN 7331-2008 Gasoline.Test method for determination of manganese by atomic absorption spectroscopy
TCVN 5098-1990 Hosiery.Test method for determination of pressure on elastic ring

Standard Association of Australia （SAA）, Rated voltage test and acceptance method

IEC 60840:2011 RLV Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) — Test methods and requirements
IEC 62067:2011 RLV Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) — Test methods and requirements
IEC 60885-3:2015 RLV Electrical test methods for electric cables — Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
AS 1767.2.1:1999 Insulating liquids - Test Methods - Determination of the breakdown voltage at power frequency
IEC 60840:2020+AMD1:2023 CSV Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV) — Test methods and requirements
IEC 60840:2020/AMD1:2023 Amendment 1 — Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV) — Test methods and requirements
AS/NZS IEC 60840:2020 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) — Test methods and requirements
AS/NZS 2891.9.3:2014
AS 1289.3.4.1:2008
AS/NZS IEC 60331.3:2021 Tests for electric cables under fire conditions — Circuit integrity, Method 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0.6/1.0 kV tested in a metal enclosure
AS IEC 62217:2021 Polymeric HV insulators for indoor and outdoor use — General definitions, test methods and acceptance criteria

PL-PKN, Rated voltage test and acceptance method

PN E04160-72-1992 Electric cables Test methods Yoltage test techniques
PN E04070-17-1986 Power transformers Test methods Determination of noise parameters
PN E04070-13-1986 Power transformers Test methods Lightning impulse test
PN C89085-22-1988 Epoxy resins Methods of testing Determination of total volume shrinkage
PN E04070-15-1986 Power transformers Test methods Measurement of intensity of partial discharge with alternating voltage

IEC - International Electrotechnical Commission, Rated voltage test and acceptance method

IEC 62893-2:2017 Charging cables for electric vehicles of rated voltages up to and including 0@6/1 kV – Part 2: Test methods (Edition 1.0)

American National Standards Institute （ANSI), Rated voltage test and acceptance method

ANSI/AMCA 260-2013 Laboratory Methods of Testing Induced Flow Fans for Rating
ANSI/IEEE 1653.4:2011 Standard for dc Traction Power System Field Testing and Acceptance Criteria for System Applications up to 1500 Volts dc Nominal
ANSI/ASHRAE 37-2005 Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment
ANSI/ASHRAE 23-2005 Methods of Testing for Rating Positive Displacement Refrigerant Compressors and Condensing Units
ANSI/ASHRAE 118.1-2012 Method of Testing for Rating Commercial Gas, Electric and Oil Service Water Heating Equipment
ANSI/EIA 364-1004:2010 TS-1004 Environmental Test Methodology for Verifying the Current Rating of Free-Standing Power Contacts or Electrical Connectors
ANSI/ASTM D3237:2002 Lead in Gasoline by Atomic Absorption Spectrometry, Method of Test for (05.02)
ANSI/AMCA 240-1996 Laboratory Method of Testing Positive Pressure Ventilators for Rating
ANSI/AMCA 240-2006 Laboratory Method of Testing Positive Pressure Ventilators for Rating
ANSI/ASTM D1389:2007 Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials

PT-IPQ, Rated voltage test and acceptance method

NP HD 21.2-2000 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 2:Test methods
NP HD 22.2-2000 Rubber insulated cables of rated voltages up to and including 450/750V Part 2:Test methods

Society of Automotive Engineers (SAE), Rated voltage test and acceptance method

SAE ARP1665A-1997 Definition of Pressure Surge Test and Measurement Methods for Receiver Aircraft
SAE ARP1665A-2007 Definition of Pressure Surge Test and Measurement Methods for Receiver Aircraft

未注明发布机构, Rated voltage test and acceptance method

BS IEC 63075:2019 Superconducting AC power cables and their accessories for rated voltages from 6 kV to 500 kV - Test methods and requirements
BS EN 60156:1996(1999) Insulating liquids — Determination of the breakdown voltage at power frequency — Test method
BS 6622:2007(2008) Electric cables – Armoured cables with thermosetting insulation for rated voltages from 3.8 / 6.6 kV to 19 / 33 kV – Requirements and test methods
BS EN 62231:2006 Composite station post insulators for substations with A.C. voltages greater than 1000 V up to 245 kV — Definitions, test methods and acceptance criteria

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Rated voltage test and acceptance method

IEEE 1653.4-2011 DC Traction Power System Field Testing and Acceptance Criteria for System Applications up to 1500 V DC Nominal

SE-SIS, Rated voltage test and acceptance method

SIS SS 424 02 35-2-1992 House wiring cables - Rubber insulated cables with rated voltage up to and including 4501750 V - Test methods
SIS SS 424 02 31-2-1991 House wiring cables — PVC-insulated cables — Rated voltage up to and including 450/750 V — Test methods
SIS 65 00 53-1959

SAE - SAE International, Rated voltage test and acceptance method

SAE ARP1665-1983 Definition of Pressure Surge Test and Measurement Methods for Receiver Aircraft

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Rated voltage test and acceptance method

GJB 3196.28A-2005 Test methods of cartridge.Part 28:Chamber pressure measurement.electricity method

ECIA - Electronic Components Industry Association, Rated voltage test and acceptance method

349-1968 Varistor Definitions and Test Methods
EIA-364-1004A-2016 TS-1004A Environmental Test Methodology for Verifying the Current Rating of Freestanding Power Contacts or Electrical Connectors and Sockets
EIA-364-1004-2010 TS-1004 ENVIRONMENTAL TEST METHODOLOGY FOR VERIFYING THE CURRENT RATING OF FREESTANDING POWER CONTACTS OR ELECTRICAL CONNECTORS AND SOCKETS

CENELEC - European Committee for Electrotechnical Standardization, Rated voltage test and acceptance method

HD 22.2 S2-1982 Rubber Insulated Cables or Rated Voltages up to and Including 450/750 V - Part 2: Test Methods
HD 22.2 S2/ A1-1989 AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 2: Test Methods
HD 22.2 S2/ A3-1990 AMD 3 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 2: Test Methods
HD 22.2 S2/ A2-1990 AMD 2 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 2: Test Methods
HD 21.2 S2/ A13-1995 AMD 13 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods
HD 21.2 S2/ A2-1990 AMD 2 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 2: Test Methods
HD 21.2 S2/ A3-1993 AMD 3 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods
EN 60811-1-3:1995 Insulating and Sheathing Materials of Electric Cables Common Test Methods Part 1: General Application Section 3. Methods for Determining the Density Water Absorption Tests - Shrinkage Test
EN 62217:2006 Polymeric insulators for indoor and outdoor use with a nominal voltage > 1 000 V - General definitions@ test methods and acceptance criteria

The American Road & Transportation Builders Association, Rated voltage test and acceptance method

AASHTO T 92-1997(R2009) Standard Method of Test for Determining the Shrinkage Factors of Soils

AASHTO - American Association of State Highway and Transportation Officials, Rated voltage test and acceptance method

T 92-1997 Standard Method of Test for Determining the Shrinkage Factors of Soils
T92-1997 Standard Method of Test for Determining the Shrinkage Factors of Soils (Twentieth Edition)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Rated voltage test and acceptance method

ASHRAE 51-1985 Laboratory Methods of Testing Fans for Rating (AMCA Standard 210-85)
ASHRAE 118.1-1993 Method of Testing for Rating Commercial Gas@ Electric@ and Oil Water Heaters
ASHRAE 37 ERTA-2016 Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment
ASHRAE 37-2009 Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat-Pump Equipment
ASHRAE 37 ERTA-2005 Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment
ASHRAE 37-2005 Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment
ASHRAE 118.1-2008 Method of Testing for Rating Commercial Gas@ Electric@ and Oil Service Water Heating Equipment
ASHRAE 118.1-2003 Method of Testing for Rating Commercial Gas@ Electric@ and Oil Service Water Heating Equipment
ASHRAE 118.1-2012 Method of Testing for Rating Commercial Gas@ Electric@ and Oil Service Water-Heating Equipment

Military Standard of the People's Republic of China-General Armament Department, Rated voltage test and acceptance method

GJB 3308-1998 Radar feeder subsystem performance test method Voltage standing wave ratio loss Rated power receiver end leakage power transmission phase
GJB 360.27-1987 Test methods for electronic and electrical components Dielectric withstand voltage test
GJB 772.310-1993 Explosives test methods Detonation pressure determination water tank method
GJB 360.35-1987 Test methods for electronic and electrical components Resistance voltage coefficient test

Professional Standard - Energy, Rated voltage test and acceptance method

NB/T 31036-2012 Flexible and torsion resistant cables of rated voltages up to and including 1.8/3kV for wind turbine.Part 3:Methods for torsion test

International Organization for Standardization (ISO), Rated voltage test and acceptance method

ISO 17559:2003 Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics
ISO/TR 10771-2:2008 Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 2: Rating methods
ISO 8906:1988 Sawn timber; test methods; determination of resistance to local transverse compression
ISO 14085-4:2015 Aerospace series - Hydraulic filter elements - Test methods - Part 4: Verification of collapse/burst pressure rating

Professional Standard - Electricity, Rated voltage test and acceptance method

DL/T 955-2005 Analysis of water and steam in fossil fuel power plant Determination of copper and iron by graphite furnace atomic absorption spectrophotometry
DL/T 955-2016 Test methods for water and steam in thermal power plants Determination of copper and iron Atomic absorption spectrophotometry
DL/T 1048-2007 Composite post insulators for a.c. with a nominal voltage greater than 1000V.definitions,test methods and acceptance criteria

Electronic Components, Assemblies and Materials Association, Rated voltage test and acceptance method

ECA EIA-364-1004A-2016 TS-1004A Environmental Test Methodology for Verifying the Current Rating of Freestanding Power Contacts or Electrical Connectors and Sockets

ICEA - Insulated Cable Engineers Association Inc., Rated voltage test and acceptance method

P-123-739-2018 Guide To Establish Electrical Test Methods for Non-Conducting Jacket Materials for Power Cables Rated 5 to 500 kV

IN-BIS, Rated voltage test and acceptance method

Gansu Provincial Standard of the People's Republic of China, Rated voltage test and acceptance method

DB62/T 2862.1-2018 Rated voltage 330kV (Um=363kV) XLPE insulated power cables and their accessories Part 1: Test methods and requirements

GM Daewoo, Rated voltage test and acceptance method

GMKOREA EDS-T-7650-2011

ES-UNE, Rated voltage test and acceptance method

UNE-EN IEC 61238-1-3:2020/A11:2020 Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV) tested on non-insulated co...
UNE-EN IEC 61238-1-3:2020 Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV) tested on non-insulated co...
UNE 211632-1:2023 Power cables with extruded insulation and their accessories for rated voltages above 36 kV (Um = 42 kV) up to 150 kV (Um = 170 kV). Part 1: Requirements and test methods
UNE-EN 62772:2018 Composite Hollow Core Station Post Insulators for substations with a.c. voltage greater than 1000 V and d.c. voltage greater than 1500V- Definitions, test methods and acceptance criteria
UNE-EN 60885-3:2015 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables

Institute of Electrical and Electronics Engineers (IEEE), Rated voltage test and acceptance method

IEEE Std C57.100-1986 Test procedure for thermal evaluation of oil-immersed distribution transformers

Professional Standard - Electron, Rated voltage test and acceptance method

SJ 1787-1981 Method of measurement for rated peak working reverse voltage and reverse current of silicon single phase bridge rectifiers,up to 5A

BE-NBN, Rated voltage test and acceptance method

NBN C 30-811-1-3-1992 COMMON TEST METHODS FOR INSULATING AND SHEATING MATERIALS OF ELECTRIC CABLES Part 1 : Methods for general application Section Three - Methods for determining the density - Water absorption tests - Shrinkage test.

YU-JUS, Rated voltage test and acceptance method

JUS N.R4.442-1978 Electromechanical components for electromc eguipment. Test methods. Test 1 lk: Low airpressure

ES-AENOR, Rated voltage test and acceptance method

UNE 21-170 Pt.1-3-1990

CEN - European Committee for Standardization, Rated voltage test and acceptance method

PREN 1534-2019 Wood flooring - Determination of resistance to indentation (Brinell) - Test method

Canadian Standards Association (CSA), Rated voltage test and acceptance method

CSA B55.1-2012 Méthode d’essai pour la mesure de l’efficacité et de la perte de charge des récupérateurs de chaleur des eaux grises (première édition)
CSA B55.1-2020 Test method for measuring efficiency and pressure loss of drain water heat recovery units

IX-IX-IEC, Rated voltage test and acceptance method

IEC 60840:2020/AMD1:2023 CSV Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements