ZH
RU
ES

Gaussian fit

Gaussian fit, Total:497 items.

In the international standard classification, Gaussian fit involves: Electricity. Magnetism. Electrical and magnetic measurements, Occupational safety. Industrial hygiene, Internal combustion engines, Cutting tools, Products of the textile industry, Iron and steel products, Meat, meat products and other animal produce, Linear and angular measurements, Electrical engineering in general, Quality, Testing of metals, Materials for aerospace construction, Products of non-ferrous metals, Natural gas, Air quality, Fasteners for aerospace construction, Lubricants, industrial oils and related products, Machine tools, Wood-based panels, Fasteners, Buildings, Structures of buildings, Construction technology, Software development and system documentation, Measurement of volume, mass, density, viscosity, Explosion protection, Test conditions and procedures in general, Geology. Meteorology. Hydrology, Non-ferrous metals, Ferrous metals, Equipment for the metallurgical industry, Coatings and related processes used in aerospace industry, Clothes, Rubber, Machine tool systems, Freight distribution of goods, Shipbuilding and marine structures in general, Plastics, Insulating materials, Electrical wires and cables, Rubber and plastics products, Organic chemicals, Protection of and in buildings, Medical sciences and health care facilities in general, Glass, Construction materials, Materials and articles in contact with foodstuffs, Adhesives, Integrated circuits. Microelectronics, Elements of buildings, Powder metallurgy, Reinforced plastics, Space systems and operations, Inorganic chemicals, Welding, brazing and soldering, Road engineering, Waxes, bituminous materials and other petroleum products, Chipless working equipment.

US-FCR, Gaussian fit

FCR COE HL-92-7 REPORT 4-1995 HOUSTON-GALVESTON NAVIGATION CHANNELS, TEXAS PROJECT REPORT 4: THREE-DIMENSIONAL NUMERICAL MODELING OF HYDRODYNAMICS AND SALINITY

Guizhou Provincial Standard of the People's Republic of China, Gaussian fit

DB52/T 1103-2016 High precision analog speed (mileage) signal generator

Professional Standard-Safe Production, Gaussian fit

AQ 6204-2006 Thermal-conduction high concentration methane transducer for gas drainage
AQ/T 6204-2006 Thermal Conductivity High Concentration Methane Sensor for Gas Drainage
AQ 1078-2009 General specifications for transmission system of low concentration coal mine gas blending with water mist
AQ/T 1078-2009 Coal mine low-concentration gas and fine water mist mixed safety delivery device technical specifications

American Society for Testing and Materials (ASTM), Gaussian fit

ASTM D6838-02 Standard Test Method for Cummins M11 High Soot Test
ASTM D4786-00(2005) Standard Test Method for Stitch Tear Strength, Single Hole
ASTM D4786-00(2010) Standard Test Method for Stitch Tear Strength, Single Hole
ASTM A1008/A1008M-20 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Har
ASTM A1011/A1011M-02 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM A1011/A1011M-00 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM A1011/A1011M-05 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM A1011/A1011M-04a Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM A1011/A1011M-08 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1011/A1011M-09 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1011/A1011M-09b Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1011/A1011M-06 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1011/A1011M-06a Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1011/A1011M-06b Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1011/A1011M-09a Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1011/A1011M-18 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1011/A1011M-18a Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1011/A1011M-17 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1011/A1011M-14 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1011/A1011M-13 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM D4683-96 Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator
ASTM D4683-04 Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator
ASTM A635/A635M-01 Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Commercial Steel, Drawing Steel, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, Ho
ASTM D7097-09 Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test-TEOST MHT
ASTM D6616-20 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C
ASTM D6616-20a Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C
ASTM D6616-21 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 ��C
ASTM D6616-01 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer At 100deg;C
ASTM D6616-07(2012) Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100deg;C
ASTM A567/A567M-84 Specification for Castings, Iron, Cobalt, and Nickel-Base Alloy, for High Strength at Elevated Temperatures
ASTM B958/B958M-22 Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
ASTM A1011/A1011M-10 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM D6616-17 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100&x2009;&xb0;C
ASTM D6616-01a(2006) Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer At 100176;C
ASTM A1011/A1011M-12b Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1011/A1011M-12a Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1011/A1011M-15 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1011/A1011M-17a Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM D6616-07 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100x00B0;C
ASTM D4683-10 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 &x00B0;C
ASTM A1008/A1008M-00 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM A1008/A1008M-01a Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM A1008/A1008M-02e1 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM A1008/A1008M-07a Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A1008/A1008M-06 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A1008/A1008M-07 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A1008/A1008M-04 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM A1008/A1008M-04a Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM A1008/A1008M-04b Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM A1008/A1008M-05 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A1008/A1008M-05b Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A1008/A1008M-08 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A1008/A1008M-08a Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A1008/A1008M-09a Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A1008/A1008M-21a Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Har
ASTM A1008/A1008M-16 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A1008/A1008M-15 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM B686-02 Standard Specification for Aluminum Alloy Castings, High-Strength
ASTM B686-02a Standard Specification for Aluminum Alloy Castings, High-Strength
ASTM B686-99 Standard Specification for Aluminum Alloy Castings, High-Strength
ASTM B686-03 Standard Specification for Aluminum Alloy Castings, High-Strength
ASTM B686/B686M-08 Standard Specification for Aluminum Alloy Castings, High-Strength
ASTM B686/B686M-11 Standard Specification for Aluminum Alloy Castings, High-Strength
ASTM A1011/A1011M-05a Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM A1011/A1011M-04 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM A1011/A1011M-03a Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM A1011/A1011M-03 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM A1011/A1011M-01e1 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM A1011/A1011M-01a Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM D6616-01a Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer At 100°C
ASTM A1018/A1018M-09 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formabilit
ASTM A1018/A1018M-05b Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability
ASTM A1018/A1018M-05a Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability
ASTM A1018/A1018M-05 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability
ASTM A1018/A1018M-03a Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability
ASTM A1018/A1018M-03 Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Hot Rolled, Carbon, Structural, High-Strength Low-Alloy, Columbium or Vanadium, and High-Strength Low-Alloy with Improved Formability
ASTM A1018/A1018M-02 Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Hot Rolled, Carbon, Structural, High-Strength Low-Alloy, Columbium or Vanadium, and High-Strength Low-Alloy with Improved Formability
ASTM A1018/A1018M-06b Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength Steel
ASTM A1018/A1018M-06a Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability
ASTM A1018/A1018M-06c Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength Steel
ASTM A1018/A1018M-07 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1018/A1018M-18 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formabilit
ASTM A1018/A1018M-08a Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1018/A1018M-16a Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1018/A1018M-08 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formabilit
ASTM A635/A635M-07 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requir
ASTM A635/A635M-06a Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requir
ASTM A635/A635M-06 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requir
ASTM A635/A635M-04 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requir
ASTM A1018/A1018M-15 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM D4683-20 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150℃
ASTM D4683-17 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150℃
ASTM A1008/A1008M-06a Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A1008/A1008M-05a Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A1008/A1008M-18 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM B624-07 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
ASTM B624-07(2012) Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
ASTM A579-04 Standard Specification for Superstrength Alloy Steel Forgings
ASTM A579-01 Standard Specification for Superstrength Alloy Steel Forgings
ASTM A242/A242M-04e1 Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A242/A242M-04 Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A242/A242M-03 Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A242/A242M-03a Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A242/A242M-01 Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A242/A242M-00a Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM B686/B686M-07 Standard Specification for Aluminum Alloy Castings, High-Strength
ASTM A242/A242M-04(2009) Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM B686/B686M-18 Standard Specification for Aluminum Alloy Castings, High-Strength
ASTM B686/B686M-14 Standard Specification for Aluminum Alloy Castings, High-Strength
ASTM B686/B686M-10 Standard Specification for Aluminum Alloy Castings, High-Strength
ASTM A242/A242M-13 Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A242/A242M-13(2018) Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A1018/A1018M-10 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM B329-06(2012) Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM B329-14 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM A242-79 Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A242-81 Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A579/A579M-04a(2009) Standard Specification for Superstrength Alloy Steel Forgings
ASTM A1018/A1018M-04 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formab
ASTM A1018/A1018M-06 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formab
ASTM A635/A635M-00 Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Commercial Steel, Drawing Steel, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, Hot-Rolled, General Requirements
ASTM A635/A635M-02 Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Commercial Steel, Drawing Steel, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, Hot-Rolled, General Requirements
ASTM A635/A635M-22 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General
ASTM A635/A635M-14 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM A635/A635M-15 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM A635/A635M-08 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM A635/A635M-09 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM A635/A635M-09a Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM A1008/A1008M-02 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM A1008/A1008M-01e1 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM B958/B958M-19 Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
ASTM B958-08 Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zincx2013;5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
ASTM B958/B958M-23 Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
ASTM B803/B803M-08e1 Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
ASTM B624-99 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
ASTM A1018/A1018M-23 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formabilit
ASTM B329-98 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM B329-06 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM A1011/A1011M-12 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM B958/B958M-16 Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc&x2013;5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
ASTM B958/B958M-08e1 Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zincx2013;5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
ASTM A633-79a Standard Specification for Normalized High-Strength Low-Alloy Structural Steel
ASTM A375-64 Specification for High-Strength Low-Alloy Hot-Rolled Steel Sheets and Strip
ASTM A441-79 Standard Specification for High- Strength Low- Alloy Structural Manganese Vanadium Steel
ASTM A441-81 Standard Specification for High-Strength Low-Alloy Structural Manganese Vanadium Steel
ASTM A732/A732M-20 Standard Specification for Castings, Investment, Carbon and Low-Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
ASTM A1011/A1011M-23 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A786/A786M-05 Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
ASTM A786/A786M-00b Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
ASTM A786/A786M-00a Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
ASTM A786/A786M-00 Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
ASTM A786/A786M-15(2021) Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
ASTM D3549-93a(2000) Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
ASTM D3549/D3549M-18(2023) Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens
ASTM D3549/D3549M-17 Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens
ASTM D3549/D3549M-18 Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens

Professional Standard - Coal, Gaussian fit

MT/T 721-1997 Thermal Conductivity High Concentration Methane Sensor for Gas Drainage

Group Standards of the People's Republic of China, Gaussian fit

T/QGCML 2004-2023
T/CAMS 151-2023 High precision horizontal multi-function grinding machine
T/WLJC 119-2023 Precision Vertical Complex Grinder
T/SZBX 104-2022 Structural high strength glulam
T/CIET 232-2023
T/CSEE 0303-2022 High strength and high elongation aluminum clad steel core aluminum alloy stranded wire
T/SHLX 001-2023 Hot Extrusion Die Used For High Strength Aluminum Alloy
T/CAMETA 001011-2023 High-strength composite material & quot light-weight pallets
T/YNSX 003-2022 High molecular weight high density polyethylene (HMWHDPE) hollow structural wall composite pipe
T/JCMS 0004-2022 High strength rubber composite fiber waterproof sheet
T/CACM 1489-2023 Guidelines for the diagnosis and treatment of high myopia with integrated traditional Chinese and western medicine
T/SZMES 7-2023 Casting and forging integrally formed high-strength aluminum alloy parts
T/YNSX 3-2020 High molecular weight high density polyethylene (HMWHDPE) hollow winding structure wall composite pipe
T/GMALDDC 01-2021 Geosynthetics high density Polyethylene geomembrane

SE-SIS, Gaussian fit

SIS SS 11 25 16-1983 Metallic materials - Hardness test - Vickers test HV 5 to HV 100
SIS SS 11 25 17-1983 Metallic materials - Hardness test - Vickers test HV 0,2 to less than HV 5

National Metrological Technical Specifications of the People's Republic of China, Gaussian fit

JJF(电子) 00010-2015 Calibration Specifications for Radio Altimeter Simulators

Korean Agency for Technology and Standards (KATS), Gaussian fit

KS B 3974-2002 Morse taper shank end mills with cemented carbide tips
KS I ISO 13271-2014(2019) Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
KS B ISO 16610-21:2014 Geometrical product specifications(GPS) — Filtration — Part 21: Linear profile filters: Gaussian filters
KS D 3630-1995 High strength chromium-molybdenum alloy steel plates for pressure vessels under high-temperature service
KS D 3630-1995(2020) High strength chromium-molybdenum alloy steel plates for pressure vessels under high-temperature service
KS D 3630-2021 High strength chromium molybdenum alloy steel plates for pressure vessels under high-temperature service
KS D 2323-1990(1995) HIGH STRENGTH BRASS INGOTS FOR CASTINGS
KS D 4102-1995(2010) High tensile strength carbon steel castings and low alloy steel castings for structural purposes
KS D 2323-1990 HIGH STRENGTH BRASS INGOTS FOR CASTINGS
KS D 2323-1985 HIGH STRENGTH BRASS INGOTS FOR CASTINGS
KS D 4129-1995 High strength chromium-molybdenum alloy steel forgings for pressure vessels under high-temperature service
KS D 4129-2021 High strength chromium molybdenum alloy steel forgings for pressure vessels under high-temperature service
KS D 4129-1995(2020) High strength chromium-molybdenum alloy steel forgings for pressure vessels under high-temperature service
KS D ISO 809:2021 Magnesium and magnesium alloys — Determination of manganese — Periodate photometric method of manganese — Periodate photometric method
KS M 1033-1997 Testing method for density of high-purity hydrocarbons by Bingham pycnometer
KS I ISO 13271:2014 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
KS M ISO 4578:2009 Adhesives－Determination of peel resistance of high-strength adhesive bonds－Floating-roller method
KS M ISO 4578:2019 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
KS M 1032-2017(2022) Testing method for refractive index of high purity hydrocarbons
KS F 2367-2017 Testing method for thickness or height of compacted asphalt paving mixture specimens
KS F 2367-2017(2022) Testing method for thickness or height of compacted asphalt paving mixture specimens
KS F 2367-1986 Testing method for thickness or height of compacted asphalt paving mixture specimens

CH-SNV, Gaussian fit

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Gaussian fit

GB/T 14987-1994 High permability alloys with high hardness and high electrical resistance
GB/T 16857.6-2006 Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 6: Estimation of errors in computing Gaussian associated features
GB/T 38715-2020(英文版) High strength magnesium alloy bars
GB/T 1591-2018 High strength low alloy structural steels
GB/T 1591-1994 High strength low alloy structural steels
GB/T 1591-2008 High strength low alloy structural steels
GB/T 14987-2016 Iron-Nickel soft magnetic alloy cold-rolled strips with high hardness and high electrical resistance
GB/T 20028-2005 Rubber,vulcanized or thermoplastic.Estimation of life-time and maximum temperature of use from an Arrhenius plot
GB/T 22579-2008 Guidance on the development of lists of maximum allowable temperatures for polymeric compounds used in electotechnical equipment
GB/T 20564.4-2022 Continuously cold rolled high strength steel sheet and strip for automobile—Part 4：High strength low alloy steel
GB/T 20564.4-2010 Continuously cold rolled high strength steel sheet and strip for automobile.Part 4:High strength low alloy steel
GB/T 13747.23-1992 Zirconium and zirconium alloys--Determination of nitrogen content--Distillation--Nessler reagent spectrophotometric method
GB/T 32248-2015 Superstrength alloy steel forgings.General specifications

CZ-CSN, Gaussian fit

CSN ISO 6507-2:1993 Metallic materials. Hardness test. Vickers test. Part 2: HV 0,2 to less than HV 5
CSN 73 0210-1-1992 Geometrical accuracy in building industry. Conditions of operation. Accuracy of erection
CSN 25 7816-1980 Combined vertical water meters; up-to 30 °C

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Gaussian fit

ASHRAE SF-98-26-2-1998 Modeling the Variation of Wind Speed with Height for Agricultural Source Pollution Control

SAE - SAE International, Gaussian fit

SAE AMS3922A-1982 PLYWOOD@ HIGH DENSITY
SAE J410-1984 High Strength@ Low Alloy Steel
SAE AMS7725B-1987 Tungsten Alloy Shapes@ Sintered@ High Density
SAE AMS7725C-2000 Tungsten Alloy Shapes@ Sintered@ High Density
SAE J935-1981 HIGH STRENGTH CARBON AND ALLOY DIE DRAWN STEELS
SAE J935-1996 High-Strength Carbon and Alloy Die Drawn Steels
SAE AMS-A-21180A-2005 Aluminum-Alloy Castings@ High Strength AREA MECA
SAE AS22759/89-2000 Wire@ Electrical@ Polytetrafluoroethylene/Polyimide Insulated@ Normal Weight@ Silver Coated@ High Strength or Ultra High Strength Copper Alloy@ 200 Degrees Celsius@ 600 Volts
SAE AS22759/81A-2004 Wire@ Electrical@ Polytetrafluoroethylene/Polyimide Insulated@ Light Weight@ Silver Coated@ High Strength or Ultra High Strength Copper Alloy@ 200°C@ 600 Volts
SAE AMS4219-1966 Aluminum Alloy Castings@ Premium Quality@ High Strength 7. 0si - 0.60Mg

Society of Automotive Engineers (SAE), Gaussian fit

SAE AMS3922-1947 PLYWOOD; HIGH DENSITY
SAE J410-1992 High Strength, Low Alloy Steel
SAE J410C-1969 HIGH STRENGTH, LOW ALLOY STEEL
SAE J410A-1962 HIGH STRENGTH, LOW ALLOY STEEL
SAE AMS-A-21180B-2011 Aluminum-Alloy Casting, High Strength
SAE AMS7725A-1976 TUNGSTEN ALLOY, SINTERED, HIGH DENSITY
SAE AMS-A-21180C-2017 Aluminum-Alloy Castings, High Strength
SAE AMS7725-1957 ALLOY, SINTERED, HIGH DENSITY Tungsten Base
SAE AMS-F-7190B-2016 Tungsten Heavy Alloy Shapes, Sintered, High Density
SAE AMS7725E-2016 Tungsten Heavy Alloy Shapes, Sintered, High Density
SAE AMS-C-81562A-2018 Tungsten Heavy Alloy Shapes, Sintered, High Density
SAE AMS7725B-1992 TUNGSTEN ALLOY SHAPES, SINTERED, HIGH DENSITY
SAE AMS7725F-2020 Tungsten Heavy Alloy Shapes, Sintered, High Density
SAE AMS7725D-2007 Tungsten Heavy Alloy Shapes, Sintered, High Density
SAE AMS7725E-2012 Tungsten Alloy Shapes, Sintered, High Density
SAE J935-2002 High-Strength Carbon and Alloy Die Drawn Steels
SAE J935-1990 HIGH STRENGTH CARBON AND ALLOY DIE DRAWN STEELS
SAE J935-2009 High Strength Carbon and Alloy Die Drawn Steels

GM North America, Gaussian fit

GM 9985411-1983 Adhesive, High Strength
GM GM6443M-1999 High Strength Heat Treated Alloy Steel
GM GM6187M-1996 High Strength Low Alloy Sheet Steel (550 MPa)
GM GM9052P-1988 Method for Determining Adhesion of Zinc Coatings on Sheet Steel (Simulated Draw Bead Test)

RU-GOST R, Gaussian fit

GOST R 56382-2015 Russian quality. Dry egg melange with improved solubility. Specifications
GOST R ISO 6507-1-2007 Metals and alloys. Vickers hardness test. Part 1. Test method
GOST R 50779.28-2007 Statistical methods. Power law model. Goodness of-fit tests and estimation methods
GOST R 50779.28-2017 Statistical methods. Power law model. Goodness of-fit tests and estimation methods
GOST R ISO 13271-2016 Stationary source emissions. Determination of PM/PM mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
GOST ISO 5415-2014 Reduction sleeves with 7/24 external and Morse internal taper with incorporated screw. Dimensions
GOST R ISO 6507-4-2009 State system for ensuring the uniformity of measurements. Metals and alloys. Vickers hardness test. Part 4. Tables of hardness values
GOST R 50779.27-2007 Statistical methods. Goodness-of-fit tests and confidence intervals for Weibull distributed data
GOST R 56740-2015 Polymer composites. Method for determination of translaminar fracture toughness characteristic of polymer composite laminates and pultruded polymer composites
GOST R 56788-2015 Polymer composites. Test method open-hole compressive strength of polymer matrix composite laminates

U.S. Military Regulations and Norms, Gaussian fit

ARMY MIL-DTL-11589/506 A VALID NOTICE 3-2013 Ribbon, United Nations Military Observer Group in India and Pakistan (UNMOGIP)
ARMY MIL-S-13281 E REINST NOTICE 2-1998 STEEL, CARBON, ALLOY, AND HIGH STRENGTH LOW ALLOY FOR WELDED STRUCTURES (STRESS RELIEVED)
ARMY MIL-S-13281 E-1985 STEEL, CARBON, ALLOY, AND HIGH STRENGTH LOW ALLOY FOR WELDED STRUCTURES (STRESS RELIEVED)
ARMY MIL-DTL-46035 C VALID NOTICE 1-2004 TITANIUM ALLOY: HIGH STRENGTH, WROUGHT (FOR CRITICAL COMPONENTS)
ARMY MIL-DTL-46035 C-1999 TITANIUM ALLOY: HIGH STRENGTH, WROUGHT (FOR CRITICAL COMPONENTS)

International Electrotechnical Commission (IEC), Gaussian fit

IEC 61710:2000 Power law model - Goodness-of-fit tests and estimation methods
IEC 61710/COR1:2001 Power law model - Goodness-of-fit tests and estimation methods; Corrigendum 1
IEC 61710:2013 Power law model.Goodness-of-fit tests and estimation methods

Danish Standards Foundation, Gaussian fit

DS/EN 61710:2013 Power law model - Goodness-of-fit tests and estimation methods
DS/ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
DS/EN 12603:2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
DS/ISO 547:1984 Electrodes for the welding of mild steel and low alloy high tensile steel — Lengths and tolerance

European Committee for Electrotechnical Standardization（CENELEC）, Gaussian fit

EN 61710:2013 Power law model - Goodness-of-fit tests and estimation methods

ECIA - Electronic Components Industry Association, Gaussian fit

EIA 61710-2017 Power Law Model - Goodness-of- Fit Tests and Estimation Methods

British Standards Institution (BSI), Gaussian fit

BS EN 61710:2013 Power law model. Goodness-of-fit tests and estimation methods
BS 6V 3:1943 Specification for aircraft material - High strength plywood for aircraft
BS EN 2262:1995 Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD
BS EN 3294:2008 Aerospace series - Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts - Classification: 1210 MPa/730 °C
BS 2SP 87 and 88:1973 Specification for 100 countersunk head high nickel-copper alloy rivets
2SP 87 and 2SP 88-1973 Specification for 100 countersunk head high nickel-copper alloy rivets
BS ISO 13271:2012 Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
BS EN 14257:2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
BS EN 14257:2019 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)

AENOR, Gaussian fit

UNE-EN 61710:2014 Power law model - Goodness-of-fit tests and estimation methods
UNE-EN 12603:2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data.

German Institute for Standardization, Gaussian fit

DIN EN 61710:2014-03 Power law model - Goodness-of-fit tests and estimation methods (IEC 61710:2013); German version EN 61710:2013
DIN 8094:2020 Machine-reamers with morse taper shank, with carbide tips, with long cutting part
DIN EN 3294:2008 Aerospace series - Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts - Classification: 1210 MPa/730 °C; German and English version EN 3294:2008
DIN EN 3063:1994 Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3063:1994
DIN EN 12603:2003-04 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data; German version EN 12603:2002
DIN EN 3379:1996 Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3
DIN EN 2935:1996 Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 2935:1996
DIN EN 3372-011:2008-10 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Part 011: Dummy receptacle - Product standard; German and English...
DIN EN 61710:2014 Power law model - Goodness-of-fit tests and estimation methods (IEC 61710:2013); German version EN 61710:2013
DIN EN 2936:1996 Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification 1210 MPa (at ambient temperature)/730 °C; German version EN 2936:1996

Standard Association of Australia （SAA）, Gaussian fit

AS/NZS IEC 61710:2020 Power law model — Goodness-of-fit tests and estimation methods

General Motors Corporation (GM), Gaussian fit

GM 9985729-1989 Compound Retaining Anaerobic, High Strength
GM 9985918-2003 Adhesive, One-Part, Antiflutter High Expansion, Low Strength
GM 9985996-1996 Adhesive, One-Part, Antiflutter, Low Expansion, High Strength

国家市场监督管理总局、中国国家标准化管理委员会, Gaussian fit

GB/T 38715-2020 High strength magnesium alloy bars
GB/T 38938-2020 High strength and low expansion alloy
GB/T 36805.1-2018 Plastics—Determination of tensile properties at high strain rates—Part 1:Equation fitting method
GB/T 38809-2020 General specification for low alloy ultra-high strength steels

National Metrological Verification Regulations of the People's Republic of China, Gaussian fit

JJG(民航) 044-1998 Verification Regulation of Radio Altimeter Ramp Simulator Type DRA-707

国家能源局, Gaussian fit

SY/T 7676-2022 Determination and simulation method of natural gas hydrate formation temperature

FMVSS - Federal Motor Vehicle Safety Standards, Gaussian fit

49 CFR 571 78 FR 53386-2013 Approval and Promulgation of Implementation Plans; State of Missouri; St. Louis Area Transportation Conformity Requirements (Proposed Rule)

European Committee for Standardization (CEN), Gaussian fit

EN 3239:1995 Aerospace series - Nuts, bihexagonal, self-locking, in heat-resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1210 MPa (at ambient temperature)/730 °C
EN 2930:1996 Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 °C
CEN EN 3294-2008_ Aerospace series - Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts -Classification: 1 210 MPa/730 °C
EN 3294:2008 Aerospace series - Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts -Classification: 1210 MPa/730 °C
EN 951:1998 Door leaves - Method for measurement of height, width, thickness and squareness
EN 4624:2010 Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plate
EN 14257:2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
EN 12603:2002 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
EN 3012:1995 Aerospace series - Nuts, bihexagonal, self-locking, in heat-resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C
EN 3379:1996 Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730 °C

API - American Petroleum Institute, Gaussian fit

API BULL 5A1-1948 MINIMUM PERFORMANCE PROPERTIES PROPOSED API HIGH-STRENGTH CASING JOINTS (Second Edition)
API BULL 5A1-1949 MINIMUM PERFORMANCE PROPERTIES PROPOSED API HIGH-STRENGTH CASING JOINTS (Third Edition)
API BULL 5-A-1-1947 INFORMATION on MINIMUM PERFORMANCE PROPERTIES PROPOSED API HIGH-STRENGTH CASING JOINTS (First Edition)

ESDU - Engineering Sciences Data Unit, Gaussian fit

SPD-M4-3-2007 Coarse grained simulation of asphaltene-hydrocarbon containing systems.
SPD-M10-2-2010 Apr.09: Coarse-grained simulation of asphaltene-hydrocarbon containing systems
SPD-M8-1-2008 Coarse-grained simulation of asphaltene-hydrocarbon containing systems - Sept. 08 update.

Association Francaise de Normalisation, Gaussian fit

NF EN 61710:2013 Modèle de loi en puissance - Essai d'adéquation et méthodes d'estimation des paramètres
NF E05-040-21*NF EN ISO 16610-21:2012 Geometrical product specifications (GPS) - Filtration - Part 21 : linear profile filters : gaussian filters
NF G03-102:1987 Clothing. Undergarment for upper part of body for men and children. Control of size and good fit.
NF ISO 13271:2012 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des hautes concentrations à l'aide des impacteurs virtuels
NF X43-342*NF ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors.
NF P78-224*NF EN 12603:2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data.
UTE C93-524:1980 Fils isolés pour températures élevées jusqu'à 150 degrés Celsius - Recueil de spécifications particulières
NF EN 12603:2003 Verre dans la construction - Procédures de validité de l'ajustement et intervalles de confiance des données de résistance du verre au moyen de la loi de Weibull

(U.S.) Ford Automotive Standards, Gaussian fit

FORD M3C53-A-1988 MINERAL CUTTING OIL HIGHLY COMPOUNDED
FORD FLTM BP 117-01-2001 POLYMERIC MATERIALS - HIGH VISCOSITY LUBRICANT COMPATIBILITY
FORD FLTM BP 117-1-2001 POLYMERIC MATERIALS - HIGH VISCOSITY LUBRICANT COMPATIBILITY
FORD WSS-M1A367-A33-2012 STEEL, SHEET, COLD ROLLED, HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A367-A34-2012 STEEL, SHEET, COLD ROLLED, HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A367-A35-2012 STEEL, SHEET, COLD ROLLED, HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A367-A11)
FORD WSS-M1A367-A36-2012 STEEL, SHEET, COLD ROLLED, HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A367-A11)
FORD WSS-M1A367-A37-2012 STEEL, SHEET, COLD ROLLED, HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A367-A11)
FORD WSS-M1A367-A38-2012 STEEL, SHEET, COLD ROLLED, HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A367-A11)
FORD WSS-M1A367-A39-2012 STEEL, SHEET, COLD ROLLED, HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A367-A11)
FORD WSS-M1A367-A44-2012 STEEL, SHEET, HOT ROLLED, HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A367-A11)
FORD WSS-M1A367-A45-2012 STEEL, SHEET, HOT ROLLED, HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A367-A11)
FORD WSS-M1A367-A46-2012 STEEL, SHEET, HOT ROLLED, HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A367-A11)
FORD WSS-M1A367-A47-2012 STEEL, SHEET, HOT ROLLED, HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A367-A11)
FORD WSS-M1A367-A48-2012 STEEL, SHEET, HOT ROLLED, HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A367-A11)
FORD WSS-M1A367-A49-2012 STEEL, SHEET, HOT ROLLED, HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A367-A50-2012 STEEL, SHEET, HOT ROLLED, HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A367-A11)

GM Europe, Gaussian fit

GME STD 5192136-2000 Steel 92136 HSLA St錶 92136 HSLA
GME STD 5192174-1984 Steel 92174 HSLA (Cold rolled) St錶 92174 HSLA (Kallvalsad)
GME STD 5192136-2005 Steel 92136 HSLA St錶 92136 HSLA English/Swedish

PL-PKN, Gaussian fit

PN H84018-1986 High strength Iow alloy steel Grades
PN H84016-1986 High strength Iow alloy balanced steel Grades
PN H93460 ArkusZ02-1973 High tensile strenght Iow alloy steel egual angles with Rm over 50 kG/mm2
PN H93460 ArkusZ06-1973 High tensile strenght Iow alloy steel unegual angles with Rm over 50 kG/mm2

Aerospace Industries Association/ANSI Aerospace Standards, Gaussian fit

AIA/NAS NAS 8602-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
AIA/NAS NAS 8602-8616-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
AIA/NAS NAS 8603-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
AIA/NAS NAS 8604-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
AIA/NAS NAS 8605-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
AIA/NAS NAS 8606-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
AIA/NAS NAS 8607-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
AIA/NAS NAS 8608-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
AIA/NAS NAS 8609-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
AIA/NAS NAS 8610-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
AIA/NAS NAS 8612-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
AIA/NAS NAS 8614-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
AIA/NAS NAS 8616-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, Alloy Steel, Short Thread
AIA/NAS NAS 8802-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
AIA/NAS NAS 8802-8816-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
AIA/NAS NAS 8803-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
AIA/NAS NAS 8804-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
AIA/NAS NAS 8805-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
AIA/NAS NAS 8806-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
AIA/NAS NAS 8807-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
AIA/NAS NAS 8808-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
AIA/NAS NAS 8809-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
AIA/NAS NAS 8810-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
AIA/NAS NAS 8812-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
AIA/NAS NAS 8814-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
AIA/NAS NAS 8816-1982 Bolt, 100 Degree Reduced Head, Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread
AIA/NAS NAS 1906-1978 Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy Rev. 1
AIA/NAS NAS 1906-1916-1978 Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy Rev. 1
AIA/NAS NAS 1908-1978 Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy (Rev. 1)
AIA/NAS NAS 1910-1978 Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy (Rev. 1)
AIA/NAS NAS 1912-1978 Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy (Rev. 1)
AIA/NAS NAS 1914-1978 Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy (Rev. 1)
AIA/NAS NAS 1916-1978 Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy Rev. 1

HU-MSZT, Gaussian fit

Institute of Electrical and Electronics Engineers (IEEE), Gaussian fit

IEEE 1516.1-2010 Modeling and Simulation (M&S) High Level Architecture (HLA) - Federate interface specification
IEEE 1516.1/COR-2003 Modeling and Simulations (M&S) High Level Architecture (HLA) - Federate interface specification; Errata

Professional Standard - Non-ferrous Metal, Gaussian fit

YS/T 847-2012 High strength aluminum alloy tubes for tent

IN-BIS, Gaussian fit

IS 4859-1968

Japanese Industrial Standards Committee (JISC), Gaussian fit

JIS Z 3213:1977 Covered electrodes for low-alloy high tensile strength steel
JIS H 2205:1985 High strength brass ingots for castings
JIS G 4110:1993 High strength chromium-molybdenum alloy steel plates for pressure vessels under high-temperature service
JIS G 3206:1993 High strength chromium-molybdenum alloy steel forgings for pressure vessels under high-temperature service
JIS G 4110:2021 High strength chromium-molybdenum and chromium-molybdenum-vanadium alloy steel plates for pressure vessels under high-temperature service
JIS G 4110:2004 High strength chromium-molybdenum and chromium-molybdenum-vanadium alloy steel plates for pressure vessels under high-temperature service
JIS G 4110:2008 High strength chromium-molybdenum and chromium-molybdenum-vanadium alloy steel plates for pressure vessels under high-temperature service
JIS G 4110:2015 High strength chromium-molybdenum and chromium-molybdenum-vanadium alloy steel plates for pressure vessels under high-temperature service

Professional Standard - Aviation, Gaussian fit

HB 5480-1991 High-strength aluminum alloy high-quality castings
HB 20057-2011 Test methods for estimating grain size of superalloy investment castings
HB 5851-1984 High-strength enamelled resistance alloy wire technical conditions
HB 8542-2018 Specification for high-density tungsten alloys for aviation counterweight
HB 5228-1983 HZL-205 Technical Standard for High Strength Cast Aluminum Alloy

American National Standards Institute （ANSI), Gaussian fit

ANSI/IEEE 1516.1:2010 Standard for Modeling and Simulation (M&S) High Level Architecture (HLA) - Federate Interface Specification

International Organization for Standardization (ISO), Gaussian fit

ISO 16610-21:2011 Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters
ISO 4587:1979 Adhesives; Determination of tensile lap-shear strength of high strength adhesive bonds
ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
ISO 4578:1990 Adhesives; determination of peel resistance of high-strength adhesive bonds; floating roller method
ISO 4578:1979 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating roller method
ISO 13271:2012/CD Amd 1:2011 Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors — Amendment 1
ISO 547:1975 Electrodes for the welding of mild steel and low alloy high tensile steel — Lengths and tolerance

Hubei Provincial Standard of the People's Republic of China, Gaussian fit

DB42/T 1680-2021 Comprehensive Intensity Level of Low Visibility Fog on Expressway

American Welding Society (AWS), Gaussian fit

WRC 020:1955 Part 1: High-Strength Low Alloy Steels
WRC 373:1992 Research on Modern High Strength Low Alloy Steel Welding

机械电子工业部, Gaussian fit

JB/T 5373.4-1991 8mm groove system combination fixture fine adjustment height support

American Gear Manufacturers Association, Gaussian fit

AGMA 11FTM28-2011 Simulation of Wear for High Contact Ratio Gear - A Mixed FE and Analytical Approach
AGMA 95FTM10-1995 Efficiency of High Contact Ratio Planetary Gear Trains
AGMA 10FTM06-2010 Finite Element Analysis of High Contact Ratio Gear

AGMA - American Gear Manufacturers Association, Gaussian fit

11FTM28-2011 Simulation of Wear for High Contact Ratio Gear - A Mixed FE and Analytical Approach

ZA-SANS, Gaussian fit

SANS 11346:2003 Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use from an Arrhenius plot

Professional Standard - Machinery, Gaussian fit

JB/T 12513-2015 Manganese-copper alloy narrow flat strips for high precision electrical resistance

Professional Standard - Military and Civilian Products, Gaussian fit

WJ 2029-1991 High Strength Alloy Structural Steel Castings for Guns

Professional Standard-Ships, Gaussian fit

CB 1249-1994 ZA1Si7Mg high-strength cast aluminum alloy for torpedo

Fujian Provincial Standard of the People's Republic of China, Gaussian fit

DB35/T 1502-2015 Comprehensive Strength Evaluation Method for High Temperature Process

Military Standard of the People's Republic of China-General Armament Department, Gaussian fit

GJB 10323-2021 High strength elastic alloy 3J33 rod specification
GJB 10143-2021 Specification for high viscosity synthetic aviation lubricants
GJB 5062-2001 Specification for high strength elastic alloy 3J33 rods
GJB 2664A-2018 Specification for tungsten-based high-density alloys for bullet cores
GJB 2664-1996 Specification for tungsten-based high-density alloys for bullet cores
GJB 1078-1991 Nickel powder for tungsten-based high-density alloy armor-piercing projectiles
GJB 1079-1991 Cobalt powder for tungsten-based high-density alloy armor-piercing projectiles
GJB 1077-1991 Tungsten powder for tungsten-based high-density alloy armor-piercing projectiles
GJB 1081-1991 Iron powder for tungsten-based high-density alloy armor-piercing projectiles
GJB 1080-1991 Manganese powder for tungsten-based high-density alloy armor-piercing projectiles
GJB 765-1989 Tungsten-based high-density alloy ring blank for gyro rotor
GJB 2915-1997 Specification for tungsten-based high-density alloy blanks for torpedoes
GJB 8747-2015 Specification for high purity alloy structural steel rods for aerospace use
GJB 1079A-2018 Specification for cobalt powder for tungsten-based high-density alloy armor-piercing projectiles
GJB 1078A-2021 Specification for nickel powder for tungsten-based high-density alloy armor-piercing projectiles
GJB 1077A-2018 Specification for tungsten powder for tungsten-based high-density alloy armor-piercing projectiles
GJB 9895-2020 Specification for special alloy ingots for high-strength aluminum castings for military use

工业和信息化部/国家能源局, Gaussian fit

JB/T 12513-2014 High-precision manganese-copper resistance alloy narrow flat strip

TR-TSE, Gaussian fit

TS 3552-1981 HEAT OR SOLVENT BONDING ENAMELLED ROUND COPPER WIRES WITH HIGH MECHANICAL PROPERTIES

Professional Standard - Petrochemical Industry, Gaussian fit

NB/SH/T 0834-2010 Standard test method for determination of moderately high temperature piston deposits by thermo-oxidation engine oil simulation test（TEOST MHT）

Defense Logistics Agency, Gaussian fit

DLA MIL-DTL-28840/7 D-2009 CONNECTORS, ELECTRICAL, CIRCULAR, SCREW THREADS, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CRIMP CONTACTS, DUMMY RECEPTACLE, WALL MOUNTING
DLA SMD-5962-90978-1994 MICROCIRCUIT, LINEAR, DIGITAL TO ANALOG CONVERTER, 12-BIT, ULTRA HIGH SPEED, HYBRID
DLA DSCC-DWG-04036 REV B-2009 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 DEGREE C, 600 VOLT
DLA DSCC-DWG-04035 REV A-2009 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 DEGREE C, 600 VOLT
DLA DSCC-DWG-04035 REV B-2010 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 DEGREE C, 600 VOLT
DLA DSCC-DWG-04036 REV C-2010 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 DEGREES C, 600 VOLT
DLA DSCC-DWG-04043 REV C-2010 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 DEGREE C, 600 VOLT
DLA DSCC-DWG-04044 REV C-2010 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 DEGREE C, 600 VOLT
DLA DSCC-DWG-04043 REV A-2007 WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200癈, 600 VOLT

United States Navy, Gaussian fit

NAVY MIL-E-22200/10 C (1)-2003 ELECTRODES, WELDING, MINERAL COVERED, IRON-POWDER LOW-HYDROGEN MEDIUM, HIGH TENSILE AND HIGHER-STRENGTH LOW ALLOY STEELS

KR-KS, Gaussian fit

KS D ISO 809-2021 Magnesium and magnesium alloys — Determination of manganese — Periodate photometric method of manganese — Periodate photometric method
KS M ISO 4578-2019 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method

AIA/NAS - Aerospace Industries Association of America Inc., Gaussian fit

NAS1906-1916-1978 Rivet-Hi-Shear@ 100 Degree Head Interference Fit@ Titanium Alloy (Rev 1)
NASM21057-1998 Nut@ Self-Locking@ Plate@ Corner@ 100 Degrees CSK Low Height@ Alloy Steel@ 125 KSI Ftu@ 450 Degrees F

European Association of Aerospace Industries, Gaussian fit

AECMA PREN 3742-1992 Aerospace Series Nuts, Hexagonal, Slotted/ Castellated, Reduced Height, Reduced Across Flats, in Heat Resisting Steel, Passivated Classification : 600 MPa (at Ambient Temperature)/650 Degrees C Edition P1
AECMA PREN 3743-1992 Aerospace Series Straight Pins, Spring Type, Heavy Duty, in Corrosion Resisting Spring Steel, Passivated Issue P 1
AECMA PREN 4309-1996 Aerospace Series Nuts, Hexagon, Self-Locking by Plastic Ring, Normal Height, Normal Across Flats, in Alloy Steel, Cadmium Plated Classification : 900 MPa (at Ambient Temperature) / 120 Degrees Celsius Edition P 1

BR-ABNT, Gaussian fit

ABNT NBR 14965-2003

WRC - Welding Research Council, Gaussian fit

BULLETIN 373-1992 RESEARCH ON MODERN HIGH STRENGTH LOW ALLOY STEEL WELDING
BULLETIN 213-1976 WELDABILITY OF NIOBIUM CONTAINING HIGH STRENGTH LOW ALLOY STEEL; A REVIEW OF THE STRUCTURE AND PROPERTIES OF WELDS IN COLUMBIUM OR VANADIUM CONTAINING HIGH STRENGTH LOW ALLOY STEELS

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Gaussian fit

GB/T 36026-2018 High-strength corrosion-resistant alloy bars for oil and gas engineering

U.S. Air Force, Gaussian fit

AIR FORCE MIL-DTL-87107 E-2012 PROPELLANT, HIGH DENSITY SYNTHETIC HYDROCARBON TYPE, GRADE JP-10
AIR FORCE MIL-DTL-87107 D VALID NOTICE 1-2011 Propellant, High Density Synthetic Hydrocarbon Type, Grade JP-10
AIR FORCE MIL-DTL-87107 D-2006 PROPELLANT, HIGH DENSITY SYNTHETIC HYDROCARBON TYPE, GRADE JP-10

Lithuanian Standards Office , Gaussian fit

LST EN 12603-2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data

Professional Standard - Commodity Inspection, Gaussian fit

SN/T 2183-2009 Food contact materials.Polymer materials.Determination of formaldehyde in food simuants.Spectrophotometry
SN/T 2183-2008 Food contact materials.Polymer materials.Determination of formaldehyde in food simuants.Spectrophotometry

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Gaussian fit

ITU-T J.56-1990 Transmission of High-Quality Sound-Programme Analogue Signals over Mixed Analogue/Digital Circuits At 320 kbit/s - Television and Sound Transmission (Formerly Recommendation ITU-R CMTT.719; Study Group 9; 8 pp)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Gaussian fit

PREN 3372-011-2005 Aerospace series Connectors@ electrical@ circular@ medium and high contact density@ scoop-proof with bayonet coupling@ operating temperatures - 65 degrees C to 175 degrees C or 200 degrees C continous Part 011: Dummy receptacle Product standard (Edition P

IT-UNI, Gaussian fit

Professional Standard - Automobile, Gaussian fit

QC/T 756-2006 High strength extruded forge aluminium alloy round bar materials for passenger cars

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Gaussian fit

GJB 1077A-2008 Specification for tungsten powder for tungsten base hign density alloy penetrator
GJB 6487-2008 Specification for high pure alloy structural steel bars for aviation

未注明发布机构, Gaussian fit

BS 6V 3:1943(2000) Specification for Aircraft Material High strength plywood for aircraft

Aerospace Industries Association, Gaussian fit

AIA NASM21057-1998 Nut, Self-Locking, Plate, Corner, 100 Degrees CSK Low Height, Alloy Steel, 125 KSI Ftu, 450 Degrees F FSC 5310

Hebei Provincial Standard of the People's Republic of China, Gaussian fit

DB13/T 5471-2021 Detection of Surface Cleanliness of Superalloy and Corrosion Resistant Alloy Cutting Materials

Taiwan Provincial Standard of the People's Republic of China, Gaussian fit

CNS 12075-1987 Wall Thickness and Height for Different Cross Sections of Hot Forging Closed Die
CNS 8755-1987 Method of Test for Thickness or Height of Compacted Bituminous Paving Mixture Specimens