ZH
RU
ES

Main instruments and main reagents:

Main instruments and main reagents:, Total:181 items.

In the international standard classification, Main instruments and main reagents: involves: Transport, Nuclear energy engineering, Optics and optical measurements, Environmental testing, Air quality, Equipment for the chemical industry, Fasteners for aerospace construction, Radiation measurements, Materials for aerospace construction, Adhesives, Metrology and measurement in general, Paper products, Audio, video and audiovisual engineering, Thermodynamics and temperature measurements, Galvanic cells and batteries, Optoelectronics. Laser equipment, Rectifiers. Convertors. Stabilized power supply, Protection against fire, Vocabularies, Analytical chemistry, Medical equipment, Networking, On-board equipment and instruments, Electrical accessories, Alarm and warning systems, Radiocommunications, Road vehicle systems, Electricity. Magnetism. Electrical and magnetic measurements, Fluid power systems, Character sets and information coding, Electrical and electronic testing, Protective equipment, Industrial automation systems, Chipless working equipment, Ground service and maintenance equipment, Floor treatment appliances, Vibrations, shock and vibration measurements, Agricultural machines, implements and equipment, Pharmaceutics, Shipbuilding and marine structures in general, Raw materials for rubber and plastics, Electronic components in general, Fruits. Vegetables, Aircraft and space vehicles in general, Rubber and plastics products, Electrical equipment for working in special conditions, Installations in buildings, Test conditions and procedures in general, Acoustics and acoustic measurements, Lubrication systems, Integrated circuits. Microelectronics, Linear and angular measurements, Solar energy engineering.

PL-PKN, Main instruments and main reagents:

PN G03352-1972 Driliing geophysies Ends of heads ins?ruments intratelluric Principal parame?ers
PN E88000-1969 Switchboard electrical measuring instruments Main overall dimenjions
PN T92706-1985 Aerodrome direction finders -- Classification, principal parameters, general technical requirements and methods of test
PN E04603-02-1992 Electrical and electronic products Environmental testing Test Cb: Damp heat, steady state, primarily for e?uipment

Group Standards of the People's Republic of China, Main instruments and main reagents:

T/CFLP 0003-2017 The technical requirements of active safety protection instrument and system for freigh
T/GDCKCJH 052-2021 Performance requirements and test method for optoelectronic integrated test instrument with integrating sphere
T/JSAMIA 014-2023 Performance requirements and test methods for automatic driving and semi-autonomous operating system of crawler harvester
T/GDCKCJH 065-2022 Performance requirements and test methods for DC parameter testers of zinc oxide lightning arrester

International Electrotechnical Commission (IEC), Main instruments and main reagents:

IEC 61342:1995 Nuclear instrumentation - Multichannel pulse height analyzers - Main characteristics, technical requirements and test methods
IEC 60068-2-31:1969 Basic environmental testing procedures. Part 2 : Tests. Test Ec: Drop and topple, primarily for equipment-type specimens
IEC 60737:2010 Nuclear power plants - Instrumentation important to safety - Temperature sensors (in-core and primary cooling circuit) - Characteristics and test methods
IEC 60068-2-31/AMD1:1982 Basic environmental testing procedures. Part 2 : Tests. Test Ec: Drop and topple, primarily for equipment-type specimens

RU-GOST R, Main instruments and main reagents:

GOST 28217-1989 Basic environmental testing. Part 2. Tests. Test Ec: Drop and Topple, primarily for equipment-type specimens
GOST R 50821-1995 Fibrous mist eleminators. Their types and main parameters. Safety requirements. Methods of testing
GOST 25851-1983 Radiometric instruments. Methods of main parameters measurement
GOST R 52846-2007 Lead-acid traction batteries. Part 1. Main requirements and test methods
GOST R 8.654-2015 State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST R 51747-2001 Microwave radio beacon instrument approach landing system for air vehicles. Main parameters and methods of measuring
GOST R 8.654-2009 State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST R ISO 9919-1999 Pulse oximeters for medical use. Technical requirements and test methods
GOST R ISO 9919-2007 Medical electrical equipment. Particular requirements for basic safety and essential performance of pulse oximeters
GOST 31824-2012 Fibrous mist eliminators. Types and main parameters. Safety requirements. Methods of testing
GOST 10398-2016 Reagents and superpure substancies. Complexonometric method for determination of main substance content
GOST R 52434-2005 Active infra-red detectors. General technical requirements and test methods
GOST R 51742-2001 Broadcasting transmitters, fixed AM modulated, ranges of low frequency, mean frequency and high frequency. Main parameters, technical requirements and methods of measurement
GOST R 50643-1994 Brake anti-lock device connection. Main dimensions. Technical requirements and test. Arrangement of the connection on the vehicles
GOST 17444-2016 Reagents. Methods for determination of main substance of nitrogen containing organic compounds and salts of organic acids
GOST 28387-1989 Microwave radio beacon instrument approach landing system for air vehicls. Main parameters and measurement techniques
GOST 28229-1989 Basic environmental testing procedures. Part 2. Tests. Test XA and guidance. Immersion in cleaning solvents
GOST R 8.778-2011 State system for ensuring the uniformity of measurements. Measuring instruments of heat energy hot-water heating systems. Metrological assurance. Main principles
GOST 28212-1989 Basic environmental testing procedures. Part 2. Tests. Test U: Robustens of terminations and integral mounting devices
GOST 26089-1984 Rubber hoses for hydraulic brakes of automobiles. Basic parameters and dimensions, requirements, test, methods, marking, packing, trasportation and storage
GOST R 57395-2017 Angle-to-digit converters. General requirements for measuring instruments, testing and monitoring of input and output parameters

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Main instruments and main reagents:

GB/T 4833.1-2007 Multichannel analyzers- Part 1: Main technical requirements and test methods
GB/T 9396-1996 Methods of measurement for main characteristics of loudspeakers
GB/T 15175-1994 Measurement methods for main parameter of solid-state lasers
GB/T 31364-2015 Test methods for main performance of energy dispersive X-ray fluorescence spectrometer
GB/T 4833-1997 Multichannel pulse height analyzers--Main characteristics, technical requirements and test methods
GB/T 12060.5-2011 Sound system equipment.Part 5: Methods of measurement for main characteristics of loudspeakers
GB/T 28549-2012 Verification requirement of supports in nuclear island during unclear power plant commissioning
GB/T 2423.7-1995 Environmental testing for electric and electronic products. Test 2:Test methods. Test Ec and guidance:Drop and topple. Primarily for equipment-type specimens
GB/T 22108.2-2008 Pneumatic fluid power.Compressed air filters.Part 2: Test methods to determine the main characteristics to be included in suppliers literature

未注明发布机构, Main instruments and main reagents:

DIN IEC 1342:1996 Nuclear instrumentation — Multichannel! pulse height analyzers — Main characteristics, technical requirements and test methods

British Standards Institution (BSI), Main instruments and main reagents:

BS SP 22-27:1950 Specifications for B.A. washers for aircraft purposes (primarily for instrument use)
BS SP 22-27:1950+A2:2011 Specification for B.A. Washers. For aircraft purposes (primarily for instrument use)
BS EN ISO 10365:1995 Adhesives - Designation of main failure patterns
BS IEC 60737:2010 Nuclear power plants - Instrumentation important to safety Temperature sensors (in-core and primary coolant circuit) - Characteristics and test methods
BS ISO 14934-2:2013 Fire tests. Calibration and use of heat flux meters. Primary calibration methods
BS 6711-1:1986 Vocabulary relating to laboratory apparatus made essentially from glass, porcelain or vitreous silica. Names for items of apparatus
BS EN ISO 17296-3:2016 Additive manufacturing. General principles. Main characteristics and corresponding test methods
BS ISO/IEC 15421:2010 Information technology. Automatic identification and data capture techniques. Bar code master test specifications
BS EN 13949:2003 Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking
BS ISO 6301-2:1997 Pneumatic fluid power - Compressed air lubricators - Test methods to determine the main characteristics to be included in supplier's literature
BS ISO 5782-2:1998 Pnuematic fluid power - Compressed air filters - Test methods to determine the main characteristics to be included in supplier's literature
BS ISO 6301-2:1998 Pneumatic fluid power. Compressed air lubricators. Test methods to determine the main characteristics to be included in supplier's literature

United States Navy, Main instruments and main reagents:

NAVY MIL-V-24578 B-1988 VALVES, GLOBE, PRESSURE INSTRUMENT, STEM TEST CONNECTION, UNION END

Korean Agency for Technology and Standards (KATS), Main instruments and main reagents:

KS M ISO 10365:2004 Adhesives-Designation of main failure patterns
KS B ISO 6301-1:2003 Pneumatic fluid power-Compressed air lubricators-Main characteristics to be included in supplier’s literature and product-marking requirements
KS W ISO 7718:2007 Aircraft-Connection of passenger loading bridge or transfer vehicle-Interface requirements in the vicinity of main deck passenger doors
KS W ISO 7718:2013 Aircraft－Connection of passenger loading bridge or transfer vehicle－Interface requirements in the vicinity of main deck passenger doors
KS D ISO 17296-3:2018 Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods
KS B ISO 5782-2-2002(2022) Pneumatic fluid power－Compressed air filters－Part 2：Test methods to determine the main characteristics to be included in supplier’s literature

Japanese Industrial Standards Committee (JISC), Main instruments and main reagents:

JIS K 6866:1999 Adhesives -- Designation of main failure patterns
JIS E 5008:1993 Main rectifiers for railway rolling stock -- Test methods
JIS C 60068-2-31:1995 Environmental testing Part 2: Tests. Test Ec: Drop and topple, primarily for equipment-type specimens
JIS C 0097:2001 Environmental testing -- Part 2: Tests -- Test Cy: Damp heat, steady state, accelerated test primarily intended for components

Professional Standard - Aerospace, Main instruments and main reagents:

QJ 1079A-2004 Major precision parameters and testing methods for gyroscopes
QJ 1079-1986 Gyroscope main accuracy index and test method

CZ-CSN, Main instruments and main reagents:

CSN 25 0991-1964 Round charts for recording instruments. Principal dimensions and workmanship
CSN 01 5140 Cast.1-1985 Combustible dusts. Methoda of testing General and principal regulations
CSN 36 6112-1981 Telephone sets for general use. Main features. Technical specifications. Methods of testing and measurement
CSN 36 6118-1985 Telephone sets with amplification of receiving. Main features. Technical specifications. Methods of testing and measurement
CSN 02 6530-1987 Disengaging mechanical friction clutches with electromagnetic engagement. Main technical requirements. Testing methods
CSN IEC 68-2-31:1992 Electrotechnical and electronic products. Basic envromental teting procedures. Part 2-31: Test Ec: Drop and toppl, primarily for equipment-type specimens

Professional Standard - Machinery, Main instruments and main reagents:

JB/T 9491-1999 Measuring mathod of major parameter for He-Ne lasers
JB/T 6249-1992 Test method of main parameters of helium cadmium lasers
JB/T 9489-1999 Measuring mathod of major parameter for argon ion lasers
JB/T 6250.1-1992 Test method of main parameters of YAG continuous wave lasers
JB/T 6250.2-1992 Test method of main parameters of YAG pulse lasers
JB/T 5748-1991 Test method of main parameters of ruby laser
JB/T 5749-1991 Test method of main parameters of neodymium glass laser
JB/T 9490-1999 Meauring mathod of major parameter for CO2 lasers
JB/T 9490-2013 CO2 laser main parameter test method

工业和信息化部, Main instruments and main reagents:

SJ/T 11716-2018 Main performance testing methods of micro speakers
SJ/T 11522-2015 Main performance test methods for theater speaker systems
SJ/T 11714-2018 Main performance testing methods of acoustic waveguides for loudspeaker line arrays

RO-ASRO, Main instruments and main reagents:

STAS 9960-1991 Refrigerating equipment recipients for refrigerating agents and oi. Main parameters
STAS 11374/1-1980 COMPLEX GAUGES FOR INSCRIPTION OF RECTANGULAR PROFILE SPLINED SHAFTS AND HUBS Formes and main dimensions

HU-MSZT, Main instruments and main reagents:

Association Francaise de Normalisation, Main instruments and main reagents:

NF C74-393:1988 ELECTROMEDICAL EQUIPMENT. DIAGNOSTIC EQUIPMENT FROM EVOKED POTENTIALS (EP). PARTICULAR REQUIREMENTS - FOR SAFETY AND OPERATION.
NF X65-011-2*NF ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2 : primary calibration methods
NF E67-002-3:2015 Additive manufacturing - General principles - Part 3 : main characteristics and corresponding test methods
NF S97-122-4*NF EN 13726-4:2003 Non-active medical devices - Test methods for primary wound dressings - Part 4 : conformability
NF S97-122-3*NF EN 13726-3:2003 Non-active medical devices - Test methods for primary wound dressings - Part 3 : waterproofness
NF EN 60068-2-31:2008 Essais d'environnement - Partie 2-31 : essais - Essai Ec : choc lié à des manutentions brutales, essai destiné en premier lieu aux matériels
NF S97-122-6*NF EN 13726-6:2003 Non-active medical devices - Test methods for primary wound dressings - Part 6 : odour control.
NF C46-803:1994 Marine speed and distance measuring equipment (sdme). Operational and performance requirements. Methods of testing and required test results.
NF T45-018:1981 RAW MATERIALS FOR THE RUBBER INDUSTRY. VULCANISATION ACCELERATORS IN DISPERSIONS OR PRINCIPAL MIXTURES. METHOD OF TESTING.
NF EN 3841-505:2005 Série aérospatiale - Disjoncteurs - Méthodes d'essais - Partie 505 : résistance des éléments de raccordement principaux
NF EN 13726-6:2003 Dispositifs médicaux non-actifs - Méthodes d'essai pour les pansements primaires en contact avec la plaie - Partie 6 : contrôle de l'odeur
NF E49-320-2*NF ISO 6301-2:2019 Pneumatic fluid power - Compressed-air lubricators - Part 2 : test methods to determine the main characteristics to be included in supplier's literature

Professional Standard - Electron, Main instruments and main reagents:

SJ/T 10725-1996 Methods for tetermining main characteristics of measurement condenser microphones
SJ/Z 9001.25-1987 Basic environmental testing procedures--Part 2: Tests--Test Ec: Drop and Topple

Guangdong Provincial Standard of the People's Republic of China, Main instruments and main reagents:

DB44/T 1551-2015 Testing method of main performance index of sensor network

German Institute for Standardization, Main instruments and main reagents:

DIN 49073-1:1990 Metal boxes and boxes of isulating material for accomodation of accessories up to 16 A 250 V; main dimensions
DIN 43859:1977-06 Watthour meters for instrument-transformer connection; main dimensions for three-phase meters
DIN 43859:1977 Watthour meters for instrument-transformer connection; main dimensions for three-phase meters
DIN 42600-7:1986 Instrument transformers for 50 Hz, U<(Index)m> to 52 kV; voltage transformers U<(Index)m> 12 kV; narrow design, main dimensions, indoor type
DIN 42600-9:1985 Instruments transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; voltage transformers U<(Index)m> 12 and 24 kV; narrow design, main dimensions, indoor type
DIN EN 13949:2003 Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking; German version EN 13949:2003
DIN 42600-5:1977 Instrument transformers for 50 Hz, HSV 0,6 to 52 kV; current transformers (support-type-insulator) HSV 12 to 36 kV, large design, main dimensions, indoor type
DIN 45669-3:2006 Measurement of vibration immission - Part 3: Test (calibration and assessment) of the vibration measuring instrumentation; Primary test, verification, intermediate test, functional check in situ
DIN 42600-2:1983 Instrument transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; current transformers U<(Index)m>=0,8 kV; main dimensions
DIN 42600-4:1977 Instrument transformers for 50 Hz, HSV 0,6 to 52 kV; currenttransformers (support-typ-insulator), HSV 12 kV, small design, main dimensions, indoor type
DIN EN 13726-4:2003 Non-active medical devices - Test methods for primary wound dressings - Part 4: Conformability; German version EN 13726-4:2003
DIN 42600-2:2013 Instrument transformers for 50 Hz, U<(Index)m> 0,72 kV to 52 kV - Part 2: Current transformers U<(Index)m> = 0,72 kV and U<(Index)m> = 1,2 kV - Main dimensions
DIN 42600-8:1983 Instrument transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; current transformers (support-type-insulators) U<(Index)m> 12 and 24 kV; narrow design, main dimensions, indoor type
DIN 46339:1984 Connectors with resilient pin for testing purposes on terminal blocks; main dimensions for plug and socket
DIN EN 13726-3:2003 Non-active medical devices - Test methods for primary wound dressings - Part 3: Waterproofness; German version EN 13726-3:2003
DIN EN 13726-6:2003 Non-active medical devices - Test methods for primary wound dressings - Part 6: Odour control; German version EN 13726-6:2003
DIN 46339:1984-09 Connectors with resilient pin for testing purposes on terminal blocks; main dimensions for plug and socket
DIN 9020-2:1983 Aerospace; mass breakdown for aircraft heavier than air; main mass groups and terms of mass; definitions
DIN 49073:2007 Metal boxes and boxes of insulating material for recessed mounting for accomodation of accessories up to 16 A 250 V and socket-outlets according to DIN 49445, DIN 49447 and DIN EN 60309-2 (VDE 0623-20) up to 32 A 690 V - Main dimensions
DIN 42600-7:2013 Instrument transformers for 50 Hz, U<(Index)m> 0,72 kV to 52 kV - Part 7: Voltage Transformers U<(Index)m> to 12 kV - Small design, main dimensions, indoor type
DIN 25409-4:2015-12 Remote handling devices for use behind shielding walls - Part 4: Telescopic master slave manipulators - Requirements and tests
DIN 25409-4:1991 Remote handling devices for use behind shielding walls; telescopic master-slave manipulators; requirements and tests
DIN 43857-1:1978 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for single-phase meters
DIN 43857-5:1998 Watthour meters in moulded case without instrument transformers up to 60 A rated maximum current - Part 5: Principal dimensions for terminal cover
DIN 43857-2:1978 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for poly-phase meters
DIN 25435-6:2021 In-service inspections for primary coolant circuit components of light water reactors - Part 6: Eddy current testing of steam generator heating tubes

Hunan Provincial Standard of the People's Republic of China, Main instruments and main reagents:

DB43/T 1776-2020 Test method for main parameters of high energy continuous fiber laser

YU-JUS, Main instruments and main reagents:

JUS H.G8.409-1991 Reaqents. Sodium hvdroxi?e. Preparation of the main solutions for carrving out certain determinations
JUS H.G8.508-1991 Reagents. Potassium hydroxide. Preparation of the main solutions for carrying out certain determinations
JUS M.E5.100-1980 Heat exchangers. Verification of thermal balance of water-fed or steam-fed primary circuits. Principles and test requirements

AT-ON, Main instruments and main reagents:

OVE/ONORM E 2792-1999 Electrical installations - House connection feeders, mains (service connection), meter boards

IN-BIS, Main instruments and main reagents:

IS 9249 Pt.2-1982

Underwriters Laboratories (UL), Main instruments and main reagents:

UL 286C BULLETIN-2010 Summary of Topics This bulletin announces the availability of the Outline of Investigation for Multi-Detector Test Apparatus, Subject 268C

International Organization for Standardization (ISO), Main instruments and main reagents:

ISO 14934-2:2006 Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
ISO 5155:1983 Household frozen food storage cabinets and food freezers; essential characteristics and test methods
ISO 20890-3:2020 Guidelines for in-service inspections for primary coolant circuit components of light water reactors — Part 3: Hydrostatic testing
ISO 16063-11:1999 Methods for the calibration of vibration and shock transducers - Part 11: Primary vibration calibration by laser interferometry

Professional Standard - Culture, Main instruments and main reagents:

WH/T 58-2013 Main performance test methods of active loudspeaker systems in performance venues

Professional Standard - Military and Civilian Products, Main instruments and main reagents:

WJ 2254-1994 Measuring method for main meteorological parameters of ballistic test in ordnance industry proving ground

European Association of Aerospace Industries, Main instruments and main reagents:

AECMA PREN 3841-505-1994 Aerospace Series Circuit Breakers Mechanical Test Methods Strength of Main Terminals
AECMA PREN 3841-505-1996 Aerospace Series Circuit Breakers Test Methods Part 505 : Strength of Main Terminals Edition P 1
AECMA PREN 3841-505-1998 Aerospace Series Circuit Breakers Test Methods Part 505 : Strength of Main Terminals Edition P 2
AECMA PREN 3841-505-2003 Aerospace Series Circuit Breakers Test Methods Part 505: Strength of Main Terminals Edition P 3

TR-TSE, Main instruments and main reagents:

TS 1098-1972 ALUMINIUM OXIDE PRIMARILY USED FOR THE PROD?CTION OF ALUMINIUM DETERMINATION OF TITANIUM CONTENT TIRON PHOTOMETRIC METHOD

Danish Standards Foundation, Main instruments and main reagents:

DS/EN 352-5/A1:2006 Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs
DS/EN 352-5:2003 Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs
DS/ISO 5155:1984 Household frozen food storage cabinets and food freezers. Essential characteristics and test methods
DS/ISO 3147:1976 Heat exchangers. Verification of thermal balance of water-fed or steam-fed primary circuits. Principles and test requirements

Lithuanian Standards Office , Main instruments and main reagents:

LST EN 352-5-2003 Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs
LST EN 352-5-2003/A1-2006 Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs

AENOR, Main instruments and main reagents:

UNE-EN 352-5:2003 Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs
UNE-EN 352-5:2003/A1:2006 Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs

European Committee for Standardization (CEN), Main instruments and main reagents:

EN 13949:2003 Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking
EN 13726-4:2003 Non-active medical devices - Test methods for primary wound dressings - Part 4: Conformability
EN ISO 17296-3:2016 Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods

Anhui Provincial Standard of the People's Republic of China, Main instruments and main reagents:

DB34/T 2552-2015 Technical requirements and test methods for automobile vacuum booster with brake master cylinder assembly

American Society for Testing and Materials (ASTM), Main instruments and main reagents:

ASTM F494-05(2016) Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ASTM F888-94(1999) Standard Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner
ASTM F888-06(2018) Standard Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner
ASTM F888-04 Standard Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner
ASTM F888-06 Standard Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner
ASTM D7235-05 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D7235-14 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D7235-21 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D7235-21a Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices

CEN - European Committee for Standardization, Main instruments and main reagents:

EN ISO 5155:1995 Household Refrigerating Appliances - Frozen Food Storage Cabinets and Food Freezers - Characteristics and Test Methods

ZA-SANS, Main instruments and main reagents:

SANS 50352-5:2005 Hearing protectors - Safety requirements and testing Part 5: Active noise reduction ear-muffs
SANS 16063-11:2008 Methods for the calibration of vibration and shock transducers Part 11: Primary vibration calibration by laser interferometry
SANS 1515-1:2006 Gas measuring equipment primarily for use in mines Part 1: Battery-operated portable, flammable gas measuring instruments and warning devices
NRS 052-2-3-1999 Photovoltaic systems for use in individual homes Part 2: Test procedures for main components Section 3: Test procedures for regulators
NRS 052-2-4-1999 Photovoltaic systems for use in individual homes Part 2: Test procedures for main components Section 4: Test procedures for inverters

KR-KS, Main instruments and main reagents:

KS D ISO 17296-3-2018 Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Main instruments and main reagents:

GB/T 33626.2-2017 Pneumatic lutricators—Part 2:Test methods to determine the main characteristics to be included in supplier's literature

American National Standards Institute （ANSI), Main instruments and main reagents:

ANSI S1.15 Part 2-2005 Measurement Microphones - Part 2: Primary Method for Pressue Calibration of Laboratory Standard Microphones by the Reciprocity Technique

Professional Standard - Earthquake, Main instruments and main reagents:

DB/T 21-2007 Technical requirements of instruments in network for earthquake monitoring.The description of common technical parmneter and test method