ZH
KR
JP
ES
RU
DEultrasonic test
ultrasonic test, Total:117 items.
In the international standard classification, ultrasonic test involves: Non-destructive testing, Welding, brazing and soldering, Pipeline components and pipelines, Testing of metals, Applications of information technology, Iron and steel products, Bearings, Computer graphics, Components for aerospace construction, Medical equipment.
Indonesia Standards, ultrasonic test
- SNI 19-1863-1990 Ultrasonic testing method with retangular probe using direct contact method
U.S. Air Force, ultrasonic test
SE-SIS, ultrasonic test
Korean Agency for Technology and Standards (KATS), ultrasonic test
- KS B 0831-2001 Standard test blocks for ultrasonic testing
- KS B 0829-1981(1991) Calibration block type A1 used in ultrasonic testing
- KS B 0829-1986 Calibration block type A1 used in ultrasonic testing
- KS B ISO 16811:2019 Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
- KS B ISO 7963:2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2
- KS B ISO 13588:2019 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology
- KS B ISO 19285:2018 Non-destructive testing of welds — Phased array ultrasonic testing(PAUT) — Acceptance levels
- KS B ISO 10863:2019 Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique(TOFD)
- KS B ISO 23279:2007 Non-destructive testing of welds-Ultrasonic testing-Characterization of indications in welds
- KS B ISO 23279:2013 Non-destructive testing of welds－Ultrasonic testing－Characterization of indications in welds
- KS B ISO 12715:2018 Non-destructive testing — Ultrasonic testing — Reference blocks and test procedures for the characterization of contact probe sound beams
- KS B ISO 16828:2019 Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
CZ-CSN, ultrasonic test
- CSN 05 1171-1983 Nondestructive testing. Methods of ultrasonic testing of welds
- CSN 01 5028 Cast.4-1988 Non-destructive testing. Ultrasonic testing of seamless pipes steel. Determination of delamination
- CSN 01 5028 Cast.1-1988 Non-destructive testing. Ultrasonic testing of seamless steel tubes. General data
- CSN 01 5028 Cast.2-1988 Non-destructive testing. Ultrasonic testing of seamless steel tubes. Delection of longitudinal defects
- CSN 01 5028 Cast.3-1988 Non-destructive testing. Ultrasonic testing of seamless steel tubes. Determination of transverse defects
- CSN 01 5022-1984 Ultrasonic testing of materials and products-Defeot-size determination
- CSN 01 5043-1988 Non-destructive testing. Ultrasonic hand testing of rotary steel forgings and as rolled product of steel classes 11-17 and 19
- CSN 01 5024-1987 Ultrasonic hand testing of steel plates
Association Francaise de Normalisation, ultrasonic test
- NF A09-324:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment.
- NF A89-512:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
- NF A49-785-11*NF EN ISO 10893-11:2011 Non destructive testing of steel tubes - Part 11 : automated ultrasonic testing of weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
GSO, ultrasonic test
- GSO ISO 23279:2013 Non-destructive testing of welds -- Ultrasonic testing -- Characterization of indications in welds
- GSO ISO 13588:2015 Non-destructive testing of welds -- Ultrasonic testing -- Use of automated phased array technology
British Standards Institution (BSI), ultrasonic test
- BS EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
- BS EN ISO 22232-2:2020 Non-destructive testing. Characterization and verification of ultrasonic test equipment - Probes
- BS EN ISO 22232-1:2020 Non-destructive testing. Characterization and verification of ultrasonic test equipment. Instruments
- BS ISO 24647:2023 Non-destructive testing. Robotic ultrasonic test systems. General requirements
- PD ISO/TS 16829:2017 Non-destructive testing. Automated ultrasonic testing. Selection and application of systems
- BS EN ISO 7963:2010 Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2
- BS EN ISO 19285:2017 Non-destructive testing of welds. Phased array ultrasonic testing (PAUT). Acceptance levels
- BS EN ISO 23279:2010 Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds
- 22/30410844 DC BS ISO 24647. Non-destructive testing. Robotic ultrasonic test systems. General requirements
- 24/30480028 DC BS EN 12680-2 Founding Ultrasonic testing - Part 2: Steel castings for highly stressed components
- 18/30363678 DC BS EN ISO 22232-2. Non-destructive testing. Characterization and verification of ultrasonic test equipment. Part 2. Probes
- 18/30363675 DC BS EN ISO 22232-1. Non-destructive testing. Characterization and verification of ultrasonic test equipment. Part 1. Instruments
- PD IEC/TS 62462:2017 Ultrasonics. Output test. Guidance for the maintenance of ultrasound physiotherapy systems
- 18/30363681 DC BS EN ISO 22232-3. Non-destructive testing. Characterization and verification of ultrasonic test equipment. Part 3. Combined equipment
- BS EN ISO 16809:2019 Non-destructive testing. Ultrasonic thickness measurement
European Committee for Standardization (CEN), ultrasonic test
- EN 15317:2013 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
- EN ISO 19285:2017 Non-destructive testing of welds - Phased array ultrasonic testing (PAUT) - Acceptance levels
- EN ISO 23279:2017 Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds
- EN ISO 10863:2020 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)
- EN ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) [Superseded: CEN CEN/TS 14751]
- EN ISO 23279:2010 Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds
CEN - European Committee for Standardization, ultrasonic test
- EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
Japanese Industrial Standards Committee (JISC), ultrasonic test
- JIS Z 2351:2011 Method for evaluating electronic characteristics of ultrasonic test instruments
- JIS Z 3070:1998 Methods for automatic ultrasonic testing for welds of ferritic steel
PT-IPQ, ultrasonic test
- NP EN 583-1-2000 Non-destructive testing Ultrasonic examination Part 1:General principles
- NP EN 1713-2000 Non-destructive examination of welds Ultrasonic examination Characterization of indications in welds
- NP EN 10228-3-2000 Non-destructive testing of steel forgings Part 3:Ultrasonic testing of ferritic or martensitic steel forgings
KR-KS, ultrasonic test
- KS B ISO 16811-2019 Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
- KS B ISO 7963-2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2
- KS B ISO 13588-2019 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology
- KS B ISO 19285-2018 Non-destructive testing of welds — Phased array ultrasonic testing(PAUT) — Acceptance levels
- KS B ISO 10863-2019 Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique(TOFD)
- KS B ISO 12715-2018 Non-destructive testing — Ultrasonic testing — Reference blocks and test procedures for the characterization of contact probe sound beams
- KS B ISO 16828-2019 Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
German Institute for Standardization, ultrasonic test
- DIN EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment English version of DIN EN 15317:2007-05
- DIN EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2010); German version EN ISO 11666:2010
- DIN EN ISO 2400:2013 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012); German version EN ISO 2400:2012
- DIN EN ISO 23279:2010 Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds (ISO 23279:2010); German version EN ISO 23279:2010
- DIN 25435-1:2020-12 In-service inspections for primary coolant circuit components of light-water reactors - Part 1: Automated ultrasonic testing
未注明发布机构, ultrasonic test
SCC, ultrasonic test
- BS PD ISO/TS 16829:2017 Non-destructive testing. Automated ultrasonic testing. Selection and application of systems
- DANSK DS/IEC TS 62462:2017 Ultrasonics – Output test – Guidance for the maintenance of ultrasound physiotherapy systems
- AENOR UNE-EN ISO 17640:2018 Non-destructive testing of welded joints. Ultrasound test. Techniques, testing and evaluation levels. (ISO 17640:2017).
- AENOR UNE-EN ISO 11666:2018 Non-destructive testing of welded joints. Ultrasound test. Acceptance levels. (ISO 11666:2018).
- BS PD IEC/TS 62462:2017 Ultrasonics. Output test. Guidance for the maintenance of ultrasound physiotherapy systems
- DIN 25435-1 E:2020 Draft Document - In-service inspections for primary coolant circuit components of light-water reactors - Part 1: Automated ultrasonic testing
International Organization for Standardization (ISO), ultrasonic test
- ISO 13588:2019 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology
- ISO 19285:2017 Non-destructive testing of welds — Phased array ultrasonic testing (PAUT) — Acceptance levels
- ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD)
- ISO 10863:2020 Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)
- ISO 23279:2010 Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds
- ISO 23279:2007 Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds
- ISO 16827:2012 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
- ISO 13588:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
American Society for Testing and Materials (ASTM), ultrasonic test
- ASTM E1454-92(1997) Standard Guide for Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data
- ASTM E2700-20 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays
- ASTM A939-96 Standard Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
- ASTM A939-96(2001) Standard Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
- ASTM E1816-07 Standard Practice for Ultrasonic Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques
- ASTM E1962-09 Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques
- ASTM E2700-14 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays
- ASTM E1454-02 Standard Guide for Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data
- ASTM E1454-02(2008) Standard Guide for Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data
- ASTM E2663-11 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods
- ASTM E2580-07 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
- ASTM E2663-14(2018) Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods
- ASTM E2580-12 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
- ASTM E2580-17 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
PL-PKN, ultrasonic test
- PN M69777-1989 Welding Defectivenes classification of welded joints on the basis of ultrasonic tests
GM North America, ultrasonic test
- GM GMN10072-2004 Process Approval and Personnel Qualification for Ultrasonic Testing of Resistance Spot Welds
AENOR, ultrasonic test
- UNE 36451:1992 ULTRASONIC TESTING OF BROAD FLANGE BEAMS, WITH PARALLEL FLANGES AND IPE BEAMS.
Association of German Mechanical Engineers, ultrasonic test
- DVS 2945 Beiblatt 3-2001 DVS® Course Resistance Welding Connection Tester Module III: Ultrasonic Testing of Welded Joints
Society of Automotive Engineers (SAE), ultrasonic test
- SAE AMS5564-1985 STEEL TUBING, CORROSION RESISTANT 19Cr - 10Ni (SAE 30304) High Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless
- SAE AMS5564A-1986 STEEL TUBING, CORROSION RESISTANT 19Cr - 10Ni (SAE 30304) High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless
- SAE AMS5564D-2023 Steel, Corrosion Resistant, Tubing 19Cr - 10Ni High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless Cold Drawn, One Eighth - Hard Temper
- SAE AMS5564C-2013 Steel, Corrosion Resistant, Tubing 19CR - 10Ni (SAE 30304) High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless Cold Drawn, One Eighth - Hard Temper
RU-GOST R, ultrasonic test
- GOST R ISO 10124-1999 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes. Ultrasonic testing for the detection of laminar imperfections
- GOST R ISO 10332-1999 Seamless and welded ( except submerged arc-welded) steel tubes for pressure purposes. Ultrasonic testing for the verification of hydraulic leak-tightness
RO-ASRO, ultrasonic test
- SR ISO 4386-1:1996 Plain bearings - Metallic multilayer plain bearings - Part 1: Non-destructive ultrasonic testing of bond
SAE - SAE International, ultrasonic test
- SAE AMS5564B-1992 Steel@ Corrosion Resistant@ Tubing 19Cr - 10Ni (SAE 30304) High- Pressure Hydraulic@ Welded Plus Ultrasonically Tested or Seamless (UNS S30400)
Danish Standards Foundation, ultrasonic test
- DS/EN 17290:2021 Non-destructive testing – Ultrasonic testing – Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
International Electrotechnical Commission (IEC), ultrasonic test
- IEC 87/350/DTS:2006 IEC 62462, TS, Ed. 1: Ultrasonics - Output Test - Guide for the maintenance of ultrasound physiotherapy systems
GOST, ultrasonic test