ZH
RU
ES

Thermogravimetric sample preparation

Thermogravimetric sample preparation, Total:263 items.

In the international standard classification, Thermogravimetric sample preparation involves: Conducting materials, Construction materials, Test conditions and procedures in general, Seals, glands, Raw materials for rubber and plastics, Environmental testing, Company organization and management, Plastics, Lubricants, industrial oils and related products, Analytical chemistry, Organic chemicals, Water quality, Metalliferous minerals, Non-ferrous metals, Spices and condiments. Food additives, Products of the chemical industry, Aids for disabled or handicapped persons, Refractories, Road engineering, Ferroalloys, Rubber, Leather technology, Pipeline components and pipelines, Waxes, bituminous materials and other petroleum products, Nuclear energy engineering, Heat recovery. Thermal insulation, Testing of metals, Products of the textile industry, Surface treatment and coating, Quality, Cellular materials, Equipment for the metallurgical industry, Iron and steel products, Lifting equipment, Reinforced plastics, Rails and railway components, Cutting tools, Rubber and plastics products, Metrology and measurement in general, Wastes.

工业和信息化部, Thermogravimetric sample preparation

YB/T 6048-2022 Determination method of thermal weight loss of coal pitch
YS/T 63.1-2019 Testing methods for carbon materials for aluminum Part 1: Roasting method for cathode paste samples, determination of roasting weight loss and determination of apparent density of green specimens

RO-ASRO, Thermogravimetric sample preparation

STAS 8099-1974 BITUMENS Determination of loss in weight by heating
STAS SR ISO 6964:1995 Poiyoiefin pipes and fittings - Determination of carbon black by calclnatlon and pyrolysis - Test method and basic spec?fication
STAS 1338/1-1984 Road works ASPHALT MIXTURES AND HOT BITUMINOUS PAVEMENTS Preparation of mixturts, of test samples and making of the test specimens
STAS 6572-1968

Professional Standard - Aviation, Thermogravimetric sample preparation

HB 5240-1983 Test method for thermal weight loss of vulcanized rubber
HB 5367.4-1986 Determination method for thermal oxidation weight loss of carbon graphite sealing materials

American Society for Testing and Materials (ASTM), Thermogravimetric sample preparation

ASTM C771-03(2009) Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
ASTM C771-14(2019) Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
ASTM C771-97 Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
ASTM C771-03 Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
ASTM C771-14 Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
ASTM E2402-11(2017) Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E2402-19 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E1868-10 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM D2688-05 Standard Test Methods for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Methods)
ASTM D6375-09 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D2688-11 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)
ASTM D2688-94(1999)e1 Standard Test Methods for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Methods)
ASTM D2688-15e1 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)
ASTM D2688-15 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)
ASTM D6375-99a Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-05 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-09(2019) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM C792-04 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C792-04(2008) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C792-93(1998) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C792-15(2020) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C792-23 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C792-15 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C680-89(2002) Standard Practice for Determination of Heat Gain or Loss and the Surface Temperatures of Insulated Pipe and Equipment Systems by the Use of a Computer Program
ASTM E1010-84(2004) Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting
ASTM E1010-09 Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting
ASTM E1010-84(2000) Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting
ASTM C1246-00(2006) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM C1246-17(2022) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM C1246-00(2012) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM C1246-00 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM C1246-17 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM D7308-17 Standard Practice for Sample Preparation of Thermoplastic Pavement Marking Materials
ASTM D3014-99 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
ASTM D5224-00(2006) Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
ASTM D5224-12 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
ASTM E1306-17 Standard Practice for Preparation of Metal and Alloy Samples for Chemical Analysis by Electric Arc Remelting
ASTM D7308-17(2022) Standard Practice for Sample Preparation of Thermoplastic Pavement Marking Materials
ASTM D7308-07(2012) Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials
ASTM C390-08(2013) Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
ASTM C419-08(2013) Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
ASTM UOP1039-20 Automated Loss on Ignition (LOI) for Fresh, Regenerated, Used, and Spent Catalysts, Catalyst Supports, and Adsorbents by Thermogravimetric Analysis (TGA)
ASTM C419-94(2000) Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
ASTM D7308-07 Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials
ASTM C419-94 Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
ASTM C419-20 Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
ASTM C419-08 Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
ASTM C390-79(2000) Standard Criteria for Sampling and Acceptance of Preformed Thermal Insulation Lots
ASTM C390-08 Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
ASTM C390-08e1 Standard Practice for Sampling and Acceptance of Thermal Insulation Lots

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Thermogravimetric sample preparation

GB/T 27761-2011 Standard test method of mass loss and residue measurement validation of thermogravimetric analyzers
GB/T 13021-1991 Determination for the carbon black content of polyethylene pipes and fittings by calcination and pyrolysis
GB/T 14260-1993 General rules for sampling and sample preparation of heavy nonferrous metals flotation concentrates in bulk
GB/T 14260-2010 General rules for sampling and sample preparation of heavy nonferrous metals flotation concentrates in bulk
GB/T 24239-2009 Direct reduced iron and hot briquetted iron.Sampling and sample preparation
GB/T 9352-1988 Plastics--Compression moulding test specimens of thermoplastic materials
GB/T 20405.4-2006 Urine-absorbing aids for incontinence. Test methods for characterizing Polymer-based absorbent materials. Part 4: Determination of moisture content by mass loss upon heating
GB 2007.6-1987 General rules for sampling and sample preparation of bulk mineral products Moisture determination method - thermal drying method
GB/T 2007.6-1987 General rules for the sampling and sample preparation of minerals in bulk--Determination of moisture content--Heat drying method
GB/T 5471-1985 Preparation method for compression moulding of specimens of thermosetting moulding materials
GB/T 17037.1-1997 Injection moulding of test specimens of thermoplastic materails--Part 1: General principles and moulding of multipurpose and bar test specimens
GB/T 3997.1-1998 Shaped insulating refractory products--Determination of permanent change in dimension on heating
GB/T 9865.1-1996 Rubber, vulcanized or thermoplastic--Preparation of samples and test pieces--Part 1: Physical tests
GB/T 14837-1993 Rubber and rubber products.Determination of composition by thermogravimetry

Professional Standard - Machinery, Thermogravimetric sample preparation

JB/T 9141.7-1999 Test method for loss of weight by heated of flexible graphite sheets by sliding
JB/T 9141.7-2013 Flexible graphite sheets.Part 7: Test method for weight loss by heated
JB/T 8340-2013 Special products of silicon carbide.Recrystallized silicon carbide thermocouple protection tube

CZ-CSN, Thermogravimetric sample preparation

CSN 34 7010 Cast.80-1972 Weight loss test of enamelled round wire in refrigerants
CSN 42 5678-1981 Hot rolled rails of 10 steel grade for crane runways. Dimensions
CSN 64 0209-1974 Preparation of test specimens of amorphous crmoplastic materials with a defined levcl l shrinkage

Korean Agency for Technology and Standards (KATS), Thermogravimetric sample preparation

KS M ISO 21870-2007(2017) Rubber compounding ingredients－Carbon black－Determination of high－temperature loss on heating by thermogravimetry
KS M ISO 21870-2007(2022) Rubber compounding ingredients－Carbon black－Determination of high－temperature loss on heating by thermogravimetry
KS M ISO 21870:2007 Rubber compounding ingredients－Carbon black－Determination of high－temperature loss on heating by thermogravimetry
KS M ISO 20202:2010 Carbonaceous materials used in the production of aluminium-Cold and tepid ramming pastes-Preparation of baked test pieces and determination of loss on baking
KS M ISO 20202:2013 Carbonaceous materials used in the production of aluminium－Cold and tepid ramming pastes－Preparation of baked test pieces and determination of loss on baking
KS M ISO 803:2010 Aluminium oxide primarily used for the production of aluminium－Determination of loss of mass at 300℃(conventional moisture)
KS P ISO 17190-4-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 4：Determination of moisture content by mass loss upon heating
KS E ISO 10835-2008(2018) Direct reduced iron and hot briquetted iron－Sampling and sample preparation
KS P ISO 17190-4:2011 Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 4：Determination of moisture content by mass loss upon heating
KS P ISO 17190-4:2021 Urine-absorbing aids for incontinence -- Polyacrylate superabsorbent powders –Part 4: Test method for estimation of the moisture content as weight loss upon heating
KS C IEC 62340-2012(2022) Nuclear power plants－Instrumentation and control systems important to safety－Requirements for coping with common cause failure(CCF)
KS C IEC 62340-2012(2017) Nuclear power plants－Instrumentation and control systems important to safety－Requirements for coping with common cause failure(CCF)
KS Q ISO 3951-3-A:2019 Sampling procedures for inspection by variables — Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
KS M ISO 4661-1:2011 Rubber, vulcanized or thermoplastic－Preparation of samples and test pieces－Part 1：Physical tests
KS M ISO 4661-1-2002(2007) Rubber, vulcanized or thermoplastic－Preparation of samples and test pieces－Part 1：Physical tests

Danish Standards Foundation, Thermogravimetric sample preparation

DS 1097.4:1975 Floorings. Determination of dimensional changes and lose in weight on heating
DS/ISO 17190-4:2020 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 4: Test method for estimation of the moisture content as weight loss upon heating
DS/EN 12697-17+A1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 17: Particle loss of porous asphalt specimen
DS/EN 13880-6:2004 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing

British Standards Institution (BSI), Thermogravimetric sample preparation

BS EN 60068-2-51:2000 Environmental testing - Test methods - Tests - Tests Z/BFc - Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
BS EN 60068-2-50:2000 Environmental testing - Test methods - Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat dissipating specimens
BS ISO 21870:2005 Rubber compounding ingredients - Carbon black - Determination of high-temperature loss on heating by thermogravimetry
BS ISO 10835:2007 Direct reduced iron and hot briquetted iron - Sampling and sample preparation
BS ISO 20202:2004 Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of baked test pieces and determination of loss on baking
BS 5293-5:1992 Sampling and testing carbon black for use in the rubber industry - Method for determination of loss of mass on heating
BS ISO 17190-4:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders - Test method for estimation of the moisture content as weight loss upon heating
BS EN 12697-17:2004 Bituminous mixtures - Test methods for hot mix asphalt - Particle loss of porous asphalt specimen
PD ISO/TS 11308:2020 Nanotechnologies. Characterization of carbon nanotube samples using thermogravimetric analysis
BS ISO 2596:2006 Iron ores - Determination of hygroscopic moisture in analytical samples - Gravimetric, Karl Fischer and mass-loss methods
BS 6043 Sec.4.7:1991 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Preparation of baked rammed test pieces and determination of baked apparent density, change in volume and loss in mass
BS IEC 62340:2008 Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with common cause failure (CCF)
BS ISO 16365-2:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion. Preparation of test specimens and determination of properties
19/30394366 DC BS ISO 17190-4. Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders. Part 4. Test method for estimation of the moisture content as weight loss upon heating
BS PD ISO/TS 11308:2020 Tracked Changes. Nanotechnologies. Characterization of carbon nanotube samples using thermogravimetric analysis
BS EN 62340:2010 Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with common cause failure (CCF)
BS EN 62340:2008 Nuclear power plants. Instrumentation and control systems important to safety. Requirements for coping with common cause failure (CCF)
BS EN 13880-6:2004 Hot applied joint sealants - Method for the preparation of samples for testing
BS ISO 19935-3:2021 Plastics. Temperature modulated DSC. Separation of overlapping thermal transitions
BS 2782-9 Met 902A:1992 Methods of testing plastics. Sampling and test specimen preparation.. Compression moulding test specimens of thermosetting materials
BS EN ISO 20274:2017 Vitreous and porcelain enamels. Preparation of samples and determination of thermal expansion coefficient
BS 6043-4.7:1991 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Preparation of baked rammed test pieces and determination of baked apparent density, change in volume and loss in mass
BS EN ISO 294-5:2013 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS EN ISO 7792-2:2012 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 20028-2:2017 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS ISO 294-5:2011 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS 2782-9 Method 940A:1990 Methods of testing plastics - Sampling and test specimen preparation - Preparation of test specimens of amorphous thermoplastics in the form of bars with a specified reversion
BS 2782-9 Method 940B:1989 Methods of testing plastics. Sampling and test specimen preparation. Preparation of test specimens of amorphous thermoplastics with a specified reversion by injection moulding rectangular plates
BS EN 13880-6:2019 Tracked Changes. Hot applied joint sealants. Method for the preparation of samples for testing
BS ISO 27547-1:2010 Plastics. Preparation of test specimens of thermoplastic materials using mouldless technologies. General principles, and laser sintering of test specimens
BS ISO 14910-2:1998 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Preparation of test specimens and determination of properties
BS EN ISO 294-5:2017 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy

Association of German Mechanical Engineers, Thermogravimetric sample preparation

VDI 3822 Blatt 2.1.10-2012 Failure analysis - Significant instrumental analysis methods for failure analysis of products made of plastics
VDI 3822 Blatt 2.1.9-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by microbial stress
VDI 3822 Blatt 2.1.1-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by faulty design
VDI 3822 Blatt 2.1.8-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by weather-induced stress
VDI 3822 Blatt 2.1.3-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by an unfavourable choice of material and by defects in the material
VDI 3822 Blatt 2.1.6-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by tribology-induced stress

Professional Standard - Petrochemical Industry, Thermogravimetric sample preparation

SH/T 0731-2004 Standard test method for evaporation loss of lubricating oils by thermogravimetric analyzer (TGA) Noack method
SH/T 1499.10-2012 Pure adipic acid.Part 10:Determination of content of moisture.Thermogravimetric method

Hebei Provincial Standard of the People's Republic of China, Thermogravimetric sample preparation

DB13/T 1236-2010 Determination method of loss on drying (loss on heating) of chemical products

International Organization for Standardization (ISO), Thermogravimetric sample preparation

ISO 21870:2005 Rubber compounding ingredients - Carbon black - Determination of high-temperature loss on heating by thermogravimetry
ISO 10835:2007 Direct reduced iron and hot briquetted iron - Sampling and sample preparation
ISO 20202:2004 Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of baked test pieces and determination of loss on baking
ISO 17190-4:2020 Urine-absorbing aids for incontinence — Polyacrylate superabsorbent powders — Part 4: Test method for estimation of the moisture content as weight loss upon heating
ISO 6964:1986 Polyolefin pipes and fittings; Determination of carbon black content by calcination and pyrolysis; Test method and basic specification
ISO 17190-4:2001 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 4: Determination of moisture content by mass loss upon heating
ISO 20274:2017 Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient
ISO 16365-2:2014 Plastics - Thermoplastic polyurethanes for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties
ISO 2477:2005 Shaped insulating refractory products - Determination of permanent change in dimensions on heating
ISO 2477:1987 Shaped insulating refractory products; Determination of permanent change in dimensions on heating
ISO 19935-3:2021 Plastics - Temperature modulated DSC - Part 3: Separation of overlapping thermal transitions
ISO 294-5:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 294-5:2011 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy

Association Francaise de Normalisation, Thermogravimetric sample preparation

NF T45-135*NF ISO 21870:2005 Rubber compounding ingredients - Carbon black - Determination of high-temperature loss on heating by thermogravimetry.
NF P98-818-17:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 17 : particle loss of porous asphalt specimen.
NF P98-818-17/IN1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 17 : particle loss of porous asphalt specimen.
NF C19-206*NF EN 62340:2010 Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with Common Cause Failure (CCF)
NF T51-713-1*NF EN ISO 10724-1:2002 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1 : general principles and moulding of multipurpose test specimens
NF EN ISO 20274:2017 Emaux vitrifiés - Préparation d'échantillons d'émail et détermination du coefficient de dilatation thermique
NF T51-294-1/A1:2002 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1 : general principles, and moulding of multipurpose and bar test specimens.
NF A91-317*NF EN ISO 20274:2017 Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient
NF A45-310:1984 Iron and steel products. Hot-rolled. 30 kg/m flat bottom railway rails and fishplates.
NF A45-313:1984 Iron and steel products. Hod-rolled. 46 kg/m flat bottom ralway rail and fishplate.
NF A45-316:1984 Iron and steel products. Hod-rolled. 55 kg/m flat bottom railway rail and fishplate.
NF T51-294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: preparation of standard specimens for investigating anisotropy
NF P98-880-6*NF EN 13880-6:2019 Hot applied joint sealants - Part 6 : method for the preparation of samples for testing
NF P98-880-6:2004 Hot applied joint sealants - Part 6 : test method for the preparation of samples for testing.
NF T51-713-2*NF EN ISO 10724-2:2001 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2 : small plates.
NF T51-294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage.
NF EN ISO 294-5:2017 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 5 : préparation d'éprouvettes normalisées pour déterminer l'anisotropie
NF EN 13880-6:2019 Produits de scellement de joints appliqués à chaud - Partie 6 : méthode d'essai pour la préparation des échantillons destinés à l'essai

SE-SIS, Thermogravimetric sample preparation

SIS 92 35 04-1974 Floorings. Determination of dimensional changes and loss in weight on heating
SIS SS 16 11 57-1982 Plastics - Amorphous thermoplastic moulding materials - Preparation of test specimens with a defined level of shrinkage - Part 2: Test specimens in the form of rectangular plates (Injection moulding)
SIS SS 16 11 56-1984 Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 1: Test specimens in the form of parallelepipedic bars (Injec- tion moulding and compression moulding)

RU-GOST R, Thermogravimetric sample preparation

GOST 32334-2013 Lubricating oils. Determination of evaporation loss of by thermogravimetric analyzer (TGA) Noack method
GOST R 54729-2011 Food common salt. Measurement (determination) of moisture mass fraction by thermo-gravimetric method
GOST 22030-1991 Products and materials, asbestos technical. Method of test for moisture, substance loss by heating and asbestos content
GOST R ISO 20202-2016 Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Preparation of baked test pieces and determination of loss on baking
GOST 13997.2-1984 Zirconium containing refractory materials and products. Methods for determination of losses of mass while heating
GOST 20515-1975 Aluminium thermal treated ferromobium. Sampling method and sample preparation for chemikal analysis
GOST 938.13-1970 Leather. Method of measuring of weight and linear sizes of samples
GOST 19679-1974 Plastics. Preparation of injection moulded and compression moulded specimens for optical testing of thermoplastics
GOST 12015-1966 Plastics. Preparation of test specimens from thermosetts. General requirements
GOST 12019-1966 Plastics. Preparation of test speciments from thermoplastics. General conditions
GOST R IEC 62340-2011 Nuclear power plants. Instrumentation and control systems important to safety. Requirements for coping with common cause failure
GOST 7875.2-1994 Refractory products. Procedure for determination of thermal shock resistance on samples
GOST 33372-2015 Polymer composites. Production of reinforced thermoplastic plates by moulding for preparation of test specimens
GOST R 59462-2021 Nanomanufacturing. Key control characteristics. Part 4-4. Nano materials for electrical energy storage. Evaluation of resistance to thermal runaway
GOST R 8.728-2010 State system for ensuring the uniformity of measurements. Estimation of errors of measurements of thermal energy and weight of the heat-carrier of water systems of the heat supply
GOST 9.703-1979 Unified system of corrosion and ageing protection. Plastic materials for items, used in tropical conditions. General requirements for selection and test methods

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Thermogravimetric sample preparation

GB/T 6730.3-2017 Iron ores—Determination of hygroscopic moisture in analytical samples—Gravimetric, Karl Fischer and mass-loss methods
GB/T 24131.2-2017 Rubber,raw—Determination of volatile-matter content—Part 2:Thermogravimetric methods using an automatic analyser with an infrared drying unit

Taiwan Provincial Standard of the People's Republic of China, Thermogravimetric sample preparation

CNS 4395-1978 Compression Moulding Test Specimens of Thermoplastic Materials
CNS 4394-1978 Injection Moulding Test Specimens of Thermoplastic Material

TR-TSE, Thermogravimetric sample preparation

TS 1148-1978 PLASTICS-COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS
TS 2351-1976 PLASTICS - THERMOSETTING MOULDING MATERIALS - DETERMINATION OF SHRINKAGE OF COMPRESSION MOULDED TEST SPECIMENS ?N THE FORM OF BARS

Professional Standard - Non-ferrous Metal, Thermogravimetric sample preparation

YS/T 63.1-2006 Carbonaceous materials used in the production of aluminium Part 1 Cathodic pastes-Preparation of baked test pieces、determination of loss on baking and apparent density after ramming

KR-KS, Thermogravimetric sample preparation

KS P ISO 17190-4-2021 Urine-absorbing aids for incontinence -- Polyacrylate superabsorbent powders –Part 4: Test method for estimation of the moisture content as weight loss upon heating
KS M ISO 20202-2010 Carbonaceous materials used in the production of aluminium－Cold and tepid ramming pastes－Preparation of baked test pieces and determination of loss on baking
KS Q ISO 3951-3-A-2019 Sampling procedures for inspection by variables — Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
KS D 3051-2002(2017)(英文版) Dimensions, weight and tolerances of hot rolled steel bars and bar in coil

European Committee for Electrotechnical Standardization（CENELEC）, Thermogravimetric sample preparation

EN 62340:2010 Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with Common Cause Failure (CCF)

检验方法与规程专业（理化）, Thermogravimetric sample preparation

GB 31604.3-2016 National Food Safety Standard - Determination of Loss on Drying of Resin in Food Contact Materials and Products

国家市场监督管理总局、中国国家标准化管理委员会, Thermogravimetric sample preparation

GB/T 17783-2019 Rubber,vulcanized or thermoplastic—Chemical tests—Preparation of samples and test piece
GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars
GB/T 17037.1-2019 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 1:General principles，and moulding of multipurpose and bar test specimens
GB/T 17037.5-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy

PH-BPS, Thermogravimetric sample preparation

PNS ISO/TS 11308:2021 Nanotechnologies - Characterization of carbon nanotube samples using thermogravimetric analysis

International Electrotechnical Commission (IEC), Thermogravimetric sample preparation

IEC 62340:2007 Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with common cause failure (CCF)

PL-PKN, Thermogravimetric sample preparation

PN M34131-1991 Thermal energy. Mill installations. Drawing of dust samples
PN A75101-15-1990 Fruit and vegetable products Preparation of camples and testing methods Determination of net weight and drained weight of canned fruits and yegetables
PN A75105-1985 Fruit and vegetable products Determination of net weight and drained weight of canned fruits and yegetables

GOSTR, Thermogravimetric sample preparation

GOST 7875.2-2018 Refractory products. Method for determination of thermal shock resistance on samples
GOST IEC 60811-3-2-2011 Test methods specific to PVC insulating and sheathing compounds of electric and optical cables. Loss of mass test. Thermal stability test

Japanese Industrial Standards Committee (JISC), Thermogravimetric sample preparation

JIS M 8250 AMD 1:2021 Iron ores -- Determination of hygroscopic moisture in analytical samples -- Gravimetric, Karl Fischer titration and mass-loss methods (Amendment 1)
JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
JIS K 7152:1995 Plastics -- Injection moulding of test specimens of thermoplastic materials
JIS K 7152-5:2007 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy

CEN - European Committee for Standardization, Thermogravimetric sample preparation

EN ISO 20274:2017 Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient
PREN 13880-6-2017 Hot applied joint sealants - Part 6: Method for the preperation of samples for testing

Professional Standard - Textile, Thermogravimetric sample preparation

FZ/T 01076-2000 Making method of composite specimen of fusible interlinings for garments
FZ/T 01076-2010 Making method for composite specimen of dimensional changes of fusible interlinings

Lithuanian Standards Office , Thermogravimetric sample preparation

LST EN 12697-17+A1-2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 17: Particle loss of porous asphalt specimen
LST EN 13880-6-2004 Hot applied joint sealants - Part 6: Method for the preperation of samples for testing

AENOR, Thermogravimetric sample preparation

UNE-EN 12697-17:2006+A1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 17: Particle loss of porous asphalt specimen
UNE-EN 13880-6:2006 Hot applied joint sealants - Part 6: Method for the preperation of samples for testing

European Committee for Standardization (CEN), Thermogravimetric sample preparation

EN 13880-6:2004 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing
EN ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
EN 12697-17:2004 Bituminous mixtures Test methods for hot mix asphalt Part 17: Particle loss of porous asphalt specimen (Incorporates Amendment A1: 2007)
prEN ISO 294-5 rev Plastics — Injection moulding of test specimens of thermoplastic materials — Part 5: Preparation of standard specimens for investigating anisotropy

ES-UNE, Thermogravimetric sample preparation

UNE-EN ISO 20274:2018 Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient (ISO 20274:2017)
UNE-EN 13880-6:2019 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing
UNE-EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Thermogravimetric sample preparation

ASHRAE NA-04-9-2A-2004 Heat Loss from Electrical and Control Equipment in Industrial Plants: Part 1 - Methods and Scope (RP-1104)
ASHRAE NA-04-9-2B-2004 Heat Loss from Electrical and Control Equipment in Industrial Plants: Part II - Results and Comparisons (RP-1104)

IN-BIS, Thermogravimetric sample preparation

German Institute for Standardization, Thermogravimetric sample preparation

DIN 51177:2008 Vitreous and porcelain enamels - Preparation of enamelled samples and determination of thermal expansion coefficient
DIN EN 13880-6:2019 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing
DIN EN ISO 20274:2017-12 Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient (ISO 20274:2017); German version EN ISO 20274:2017
DIN EN 13880-6:2004 Hot applied joint sealants - Part 6: Test method for the preparation of samples for testing; German version EN 13880-6:2003
DIN EN 13880-6:2019-06 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing; German version EN 13880-6:2019
DIN 53470:1951 Testing of Compression Moulding Materials; Compression Mould for the Production of Standard Specimens of Thermosetting Compression Moulding Materials
DIN EN ISO 20274:2017 Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient (ISO 20274:2017)
DIN 16783-2:1991 Ultra-high molecular weight polyethylene (PE-UHMW) moulding materials; preparation of test specimens and determination of properties
DIN EN 62340:2010 Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with Common Cause Failure (CCF) (IEC 62340:2007); German version EN 62340:2010

AASHTO - American Association of State Highway and Transportation Officials, Thermogravimetric sample preparation

T 275-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Paraffin-Coated Specimens
PP3-1994 Standard Practice for Preparing Hot Mix Asphalt (HMA) Specimens by Means of the Rolling Wheel Compactor
T 166-2005 Standard Method of Test for Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens
T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2011 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens

The American Road & Transportation Builders Association, Thermogravimetric sample preparation

AASHTO T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2016 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens

AT-ON, Thermogravimetric sample preparation

ONORM S 2118-1-2001 Sample taking and sample preparation of solid wastes for the determination of the upper calorific value - Determination of the upper calorific value (Ho) of mechanical-biological pretreated wastes and similar materials

CENELEC - European Committee for Electrotechnical Standardization, Thermogravimetric sample preparation

EN 60811-3-2:1995 Insulaking and sheathing materials of electric cables Common test methods Part 3: Methods specific to PVC compounds Section 2: Loss of mass test Thermal stability test