ZH
RU
ES

Effect of metal content

Effect of metal content, Total:494 items.

In the international standard classification, Effect of metal content involves: Leather technology, Textile fibres, Testing of metals, Jewellery, Non-ferrous metals, Ferroalloys, Welding, brazing and soldering, Rubber, Inorganic chemicals, Powder metallurgy, Water quality, Analytical chemistry, Raw materials for rubber and plastics, Metalliferous minerals, Coals, Dentistry, Organic chemicals, Air quality, Products of the chemical industry, Products of the textile industry, Ferrous metals, Footwear, Motor cycles and mopeds, Paints and varnishes, Iron and steel products, Non-metalliferous minerals, Materials for aerospace construction, Equipment for entertainment, Sugar. Sugar products. Starch, Biology. Botany. Zoology, Metrology and measurement in general, Electricity. Magnetism. Electrical and magnetic measurements, Components for electrical equipment, Farming and forestry, Spices and condiments. Food additives, Photography, Animal feeding stuffs, Food products in general, Aerosol containers, Materials and articles in contact with foodstuffs, Linear and angular measurements.

British Standards Institution (BSI), Effect of metal content

BS EN ISO 17072-2:2019 Leather. Chemical determination of metal content. Total metal content
BS EN ISO 17072-2:2011 Leather. Chemical determination of metal content. Total metal content
BS EN ISO 17072-2:2022 Tracked Changes. Leather. Chemical determination of metal content. Total metal content
21/30441409 DC BS EN ISO 17072-2. Leather. Chemical determination of metal content. Part 2. Total metal content
BS EN ISO 17072-1:2011 Leather. Chemical determination of metal content. Extractable metals
BS ISO 6101-3:2014 Rubber. Determination of metal content by atomic absorption spectrometry. Determination of copper content
BS ISO 6101-4:2014 Rubber. Determination of metal content by atomic absorption spectrometry. Determination of manganese content
BS ISO 6101-5:2006 Rubber - Determination of metal content by atomic absorption spectrometry - Determination of iron content
BS ISO 6101-5:2018 Rubber. Determination of metal content by atomic absorption spectrometry. Determination of iron content
BS ISO 19050:2015 Rubber, raw, vulcanized. Determination of metal content by ICP-OES
BS EN 24491-1:1993 Metallic powders - Determination of oxygen content by reduction methods - General guidelines
BS EN 16711-1:2015 Textiles. Determination of metal content - Determination of metals using microwave digestion
BS EN 16711-2:2015 Textiles. Determination of metal content. Determination of metals extracted by acidic artificial perspiration solution
BS EN 24503:1993 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Fusion method
BS EN ISO 17072-1:2019 Tracked Changes. Leather. Chemical determination of metal content. Extractable metals
BS ISO 6101-6:2011 Rubber. Determination of metal content by atomic absorption spectrometry. Determination of magnesium content
BS ISO 6101-6:2018 Rubber. Determination of metal content by atomic absorption spectrometry. Determination of magnesium content
BS 6648:1986 Methods for wet ashing of textile materials for subsequent determination of metal content
BS EN ISO 8891:2000 Dental casting alloys with noble metal content of at least 25% but less than 75%
BS 6810:1987 Methods for determination of metals in textiles
BS ISO 6101-2:2019 Rubber. Determination of metal content by atomic absorption spectrometry - Determination of lead content
BS ISO 6101-1:2019 Rubber. Determination of metal content by atomic absorption spectrometry - Determination of zinc content
BS EN ISO 4491-3:2006 Metallic powders - Determination of oxygen content by reduction methods - Hydrogen-reducible oxygen
BS EN ISO 4491-4:2013 Metallic powders. Determination of oxygen content by reduction methods. Total oxygen by reduction-extraction
BS EN 2951:2019 Aerospace series. Metallic materials. Micrographic determination of content of non-metallic inclusions
BS EN ISO 7625:2007 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
BS EN ISO 7625:2012 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
BS EN ISO 11212-1:1997 Starch and derived products. Heavy metals content. Determination of arsenic content by atomic absorption spectrometry
BS EN ISO 11212-2:1997 Starch and derived products. Heavy metals content. Determination of mercury content by atomic absorption spectrometry
BS EN ISO 4491-1:2023 Metallic powders. Determination of oxygen content by reduction methods - General guidelines
BS ISO 6101-3:2022 Tracked Changes. Rubber. Determination of metal content by atomic absorption spectrometry. Determination of copper content
BS ISO 6101-4:2022 Tracked Changes. Rubber. Determination of metal content by atomic absorption spectrometry. Determination of manganese content
BS EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity
BS EN ISO 4491-2:1999 Metallic powders - Determination of oxygen content by reduction methods - Loss of mass on hydrogen reduction (hydrogen loss)
BS ISO 13543:2016 Copper, lead, zinc and nickel sulfide concentrates. Determination of mass of contained metal in a lot

European Committee for Standardization (CEN), Effect of metal content

EN ISO 17072-2:2022 Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2022)
EN ISO 17072-2:2011 Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2011)
prEN ISO 17072-2:2021 Leather - Chemical determination of metal content - Part 2: Total metal content (ISO/DIS 17072-2:2021)
EN ISO 17072-1:2011 Leather - Chemical determination of metal content - Part 1: Extractable metals (ISO 17072-1:2011)
EN ISO 4491-4:2013 Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction
EN ISO 8891:1995 Dental Casting Alloys with Noble Metal Content of 25% up to But Not Including 75% (ISO 8891: 1993)
prEN 24491-4-1992 Metallic powders; determination of oxygen content by reduction methods; part 4: total oxyen by reduction-extraction (ISO 4491-4:1989)
EN 16711-1:2015 Textiles - Determination of metal content - Part 1: Determination of metals using microwave digestion
EN ISO 4491-1:2023 Metallic powders - Determination of oxygen content by reduction methods - Part 1: General guidelines (ISO 4491-1:2023)
EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)
EN 28891:1991 Dental casting alloys with noble metal content of 25 % up to but not including 75 % (ISO 8891:1990)
EN ISO 4491-3:2006 Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen
EN 24503:1993 Hardmetals; determination of contents of metallic elements by X-ray fluorescence; fusion method (ISO 4503:1978)
EN 24883:1993 Hardmetals; determination of contents of metallic elements by X-ray fluorescence; solution method (ISO 4883:1978)
EN ISO 8891:2000 Dental Casting Alloys with Noble Metal Content of at Least 25% but Less Than 75% ISO 8891:1998
EN 23907:1993 Hardmetals - Determination of Total Carbon Content - Gravimetric Method (ISO 3907 : 1985)
EN 24491-4:1993 Metallic Powders - Determination of Oxygen Content by Reduction Methods - Part 4: Total Oxygen by Reduction-Extraction (ISO 4491-4: 1989)
EN 15664-1:2008+A1:2013 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1: Design and operation
EN ISO 3543:2000/AC:2006 Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000/Cor.1:2003)

CEN - European Committee for Standardization, Effect of metal content

EN ISO 17072-2:2019 Leather - Chemical determination of metal content - Part 2: Total metal content
EN ISO 17072-1:2019 Leather - Chemical determination of metal content - Part 1: Extractable metals
EN ISO 4491-4:2019 Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction

International Organization for Standardization (ISO), Effect of metal content

ISO 17072-2:2011 Leather - Chemical determination of metal content - Part 2: Total metal content
ISO 17072-2:2022 Leather — Chemical determination of metal content — Part 2: Total metal content
ISO 17072-2:2019 Leather — Chemical determination of metal content — Part 2: Total metal content
ISO 17072-2:2022 | IULTCS/IUC 27-2 Leather — Chemical determination of metal content — Part 2: Total metal content
ISO 17072-2:2019 | IULTCS/IUC 27-2 Leather — Chemical determination of metal content — Part 2: Total metal content
ISO 17072-2:2011 | IULTCS/IUC 27-2 Leather — Chemical determination of metal content — Part 2: Total metal content
ISO 19050:2021 Rubber, raw, vulcanized — Determination of metal content by ICP-OES
ISO 17072-1:2019 Leather — Chemical determination of metal content — Part 1: Extractable metals
ISO 17072-1:2019 | IULTCS/IUC 27-1 Leather — Chemical determination of metal content — Part 1: Extractable metals
ISO 17072-1:2011 | IULTCS/IUC 27-1 Leather — Chemical determination of metal content — Part 1: Extractable metals
ISO 6101-5:2006 Rubber - Determination of metal content by atomic absorption spectrometry - Part 5: Determination of iron content
ISO 6101-5:1990 Rubber; determination of metal content by atomic absorption spectrometry; part 5: determination of iron content
ISO 6101-5:2018 Rubber - Determination of metal content by atomic absorption spectrometry - Part 5: Determination of iron content
ISO 8891:1990 Dental casting alloys with noble metal content of 25 % up to but not including 75 %
ISO 8891:1993 Dental casting alloys with noble metal content of 25 % up to but not including 75 %
ISO 17072-1:2011 Leather - Chemical determination of metal content - Part 1: Extractable metals
ISO 6101-3:2014 Rubber - Determination of metal content by atomic absorption spectrometry - Part 3: Determination of copper content
ISO 6101-4:2014 Rubber - Determination of metal content by atomic absorption spectrometry - Part 4: Determination of manganese content
ISO 6101-3:1988 Rubber; determination of metal content by atomic absorption spectrometry; part 3: determination of copper content
ISO 6101-4:1988 Rubber; determination of metal content by atomic absorption spectrometry; part 4: determination of manganese content
ISO 6101-1:1991 Rubber; determination of metal content by atomic absorption spectrometry; part 1: determination of zinc content
ISO 6101-4:2022 Rubber — Determination of metal content by atomic absorption spectrometry — Part 4: Determination of manganese content
ISO 6101-1:2019 Rubber — Determination of metal content by atomic absorption spectrometry — Part 1: Determination of zinc content
ISO 6101-3:2022 Rubber — Determination of metal content by atomic absorption spectrometry — Part 3: Determination of copper content
ISO 4493:1981 Metallic powders — Determination of hydrogen reducible oxygen content
ISO 4967:2013 Steel.Determination of content of non-metallic inclusions.Micrographic method using standard diagrams
ISO 4883:1978 Hardmetals; Determination of contents of metallic elements by X-ray fluorescence; Solution method
ISO 4503:1978 Hardmetals; Determination of contents of metallic elements by X-ray fluorescense; Fusion method
ISO 8891:1998 Dental casting alloys with noble metal content of at least 25 % but less than 75 %
ISO 7625:1983 Sintered metal materials, excluding hardmetals; Preparation of samples for chemical analysis for determination of carbon content
ISO 6101-6:2011 Rubber - Determination of metal content by atomic absorption spectrometry - Part 6: Determination of magnesium content
ISO 6101-6:2018 Rubber - Determination of metal content by atomic absorption spectrometry - Part 6: Determination of magnesium content
ISO 4491-1:1989 Metallic powders; determination of oxygen content by reduction methods; part 1: general guidelines
ISO 4491-1:2023 Metallic powders — Determination of oxygen content by reduction methods — Part 1: General guidelines
ISO 7625:2006 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
ISO 2737:1973 Permeable sintered metal materials — Determination of oil content
ISO 2738:1999 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity
ISO 4491-3:1989 Metallic powders; determination of oxygen content by reduction methods; part 3: hydrogen-reducible oxygen
ISO 13543:1996 Copper, lead and zinc sulfide concentrates - Determination of mass of contained metal in a lot
ISO 6101-2:2019 Rubber — Determination of metal content by atomic absorption spectrometry — Part 2: Determination of lead content
ISO 13543:2016 Copper, lead, zinc and nickel sulfide concentrates - Determination of mass of contained metal in a lot

Association Francaise de Normalisation, Effect of metal content

NF G52-101-2:2011 Leather - Chemical determination of metal content - Part 2 : total metal content.
NF G08-019-1*NF EN 16711-1:2015 Textiles - Determination of metals content - Part 1 : determination of metals using microwave digestion
NF EN ISO 17072-2:2022 Cuir - Dosage chimique des métaux - Partie 2 : teneur totale en métaux
NF G52-101-1:2011 Leather - Chemical determination of metal content - Part 1 : extractable metal.
NF EN ISO 17072-1:2019 Cuir - Détermination chimique de la teneur en métal - Partie 1 : métaux extractibles
NF S91-218:1995 DENTAL CASTING ALLOYS WITH NOBLE METAL CONTENT OF 25 PER CENT UP TO BUT NOT INCLUDING 75 PER CENT. (EUROPEAN STANDARD EN ISO 8891).
NF L10-021*NF EN 2951:2019 Aerospace series - Metallic materials - Micrographic determination of content of non-metallic inclusions
XP CEN/TS 17308:2019 Pneus usagés non réutilisables (PUNR) - Fils métalliques - Détermination de la teneur en matériaux non métalliques
NF T43-107-3:2014 Rubber - Determination of metal content by atomic absorption spectrometry - Part 3 : determination of copper content
NF T43-107-4:2014 Rubber - Determination of metal content by atomic absorption spectrometry - Part 4 : determination of manganese content
NF T43-108:1992 Rubber. Determination of metal content by atomic absorption spectrometry. Part 3 : determination of copper content.
NF T43-107:1992 Rubber. Determination of metal content by atomic absorption spectrometry. Part 4 : determination of manganese content.
NF T43-107-3*NF ISO 6101-3:2022 Rubber - Determination of metal content by atomic absorption spectrometry - Part 3 : determination of copper content
NF A95-181-4:1993 Metallic powders. Determination of oxygen content by reduction methods. Part 4: total oxygen by reduction-extraction
NF T30-211:1981 Paints and varnishes. Determination of soluble metal. Preparation of soluble lead content.
NF T30-212:1981 Paints and varnisches. Determination of soluble metal content. Determination of soluble antimony content.
NF T30-213:1981 Paints and varnishes. Determination of soluble metal content. Determination of soluble barium content.
NF T30-200:1981 Paints. Paints for children. Detection of metals soluble in hydrochloric acid.
NF A95-331*NF EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
NF A95-184:1984 Powder metallurgy. Lubricated metallic powders. Determination of lubricant content by soxhlet extraction method.
NF A95-181-1*NF EN 24491-1:1993 Metallic powders. Determination of oxygen content by reduction methods. Part 1 : general guidelines.
NF A95-181-3:1989 Metallic powders. Determination of oxygen content by reduction methods. Part 3 : hydrogen-reductible oxygen.
FD T90-012:2021 Water quality - Determination of metal content - Method for the measurement of metal concentration with passive sampling by diffusive gradient in thin films
NF EN ISO 2738:2000 Matériaux métalliques frittés, à l'exclusion des métaux durs - Matériaux métalliques frittés perméables - Détermination de la masse volumique, de la teneur en huile et de la porosité ouverte
NF T43-107-4*NF ISO 6101-4:2022 Rubber - Determination of metal content by atomic absorption spectrometry - Part 4 : determination of manganese content
NF T30-225:1983 Paints and varnishes. Determination of soluble metal content. Determination of water soluble chromium (vi).
NF A95-311*NF EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity.
NF G08-019-2*NF EN 16711-2:2015 Textiles - Determination of metal content - Part 2 : determination of metals extracted by acidic artificial perspiration solution

Danish Standards Foundation, Effect of metal content

DS/EN ISO 17072-2:2011 Leather - Chemical determination of metal content - Part 2: Total metal content
DS/EN ISO 17072-1:2011 Leather - Chemical determination of metal content - Part 1: Extractable metals
DS/EN 28 891:1992 Dental casting alloys with noble metal content of 25% up to but not including 75%
DS/EN 24883:1993 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Solution method
DS/EN ISO 8891:1995 Dental casting alloys with noble metal content of 25% up to but not including 75%
DS/EN 24503:1993 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Fusion method
DS/EN 24503:1994 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method
DS/ISO 4503:1994 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method
DS/EN 24883:1994 Hardmetals - Determination of contents of metallic elements by x-ray fluorescence - Solution method
DS/ISO 4883:1994 Hardmetals - Determination of contents of metallic elements by x-ray fluorescence - Solution method
DS/EN 24491-4:1993 Metallic powders. Determination of oxygen content by reduction methods. Part 4: Total oxygen by reduction-extraction
DS/EN 24491-1:1993 Metallic powders. Determination of oxygen content by reduction methods. Part 1: General guidelines
DS/EN ISO 11212-2:1997 Starch and derived products - Heavy metals content - Part 2: Determination of mercury content by atomic absorption spectrometry
DS/ISO 3763:1977 Wrought steels. Macroscopic methods for assessing the content of non-metallic inclusions
DS/EN 24491-1:1994 Metallic powders - Determination of oxygen content by reduction methods - Part 1: General guidelines
DS/ISO 4491-1:1994 Metallic powders - Determination of oxygen content by reduction methods - Part 1: General guidelines
DS/EN ISO 4491-3:2006 Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen

RU-GOST R, Effect of metal content

GOST R ISO 17072-2-2015 Leather. Chemical determination of metal content. Part 2. Total metal content
GOST 16698.10-1971 Metallic manganese and nitrated manganese. Method for the determination of aluminium
GOST 16698.1-1993 Metallic manganese and nitrated manganese. Method for determination of manganese
GOST 16698.4-1993 Metallic manganese and nitrated manganese. Methods for determination of phosphorus
GOST 16698.5-1993 Metallic manganese and nitrated manganese. Methods for determination of silicon
GOST 16698.6-1993 Metallic manganese and nitrated manganese. Methods for determination of iron
GOST 13020.14-1985 Metallic chrome. Methods for determination of copper
GOST 16698.1-1971 Metallic manganese. Method for the determination of manganese content
GOST 16698.5-1971 Metallic manganese. Method for the determination of silicon content
GOST 16698.4-1971 Metallic manganese. Method for the determination of phosphorus content
GOST 16698.6-1971 Metallic manganese. Method for the determination of nickel content
GOST 18317-1994 Metallic powders. Methods for determination of water
GOST 13020.1-1985 Metallic chrome. Method for determination of chrome
GOST 13020.4-1985 Metallic chrome. Method for determination of phosphorus
GOST 18317-1973 Metal powders. Method for determination of water
GOST 13020.6-1985 Metallic chrome. Method for determination of total aluminium
GOST 22720.2-1977 Rare metals and their alloys. Method for the determination of oxygen
GOST 22720.3-1977 Rare metals and their alloys. Method for the determination of carbon
GOST 22720.4-1977 Rare metals and their alloys. Method for the determination of nitrogen
GOST R ISO 17072-1-2015 Leather. Chemical determination of metal content. Part 1. Extractable metals
GOST 21132.0-1975 Aluminium alloys. Method for determination of hydrogen content in molten metal
GOST 25278.13-1987 Alloys and foundry alloys of rare metals. Methods for determination of tungsten
GOST 25278.14-1987 Alloys and foundry alloys of rare metals. Method for determination of tantalum
GOST 25278.16-1987 Alloys and foundry alloys of rare metals. Methods for determination of rhenium
GOST 27417-1998 Metallic powders. Determination of total oxygen by reduction - extraction
GOST 27417-1987 Metal powders. Methods for determination of oxygen
GOST 25702.5-1983 Raremetallic concentrates. Methods for the determination of yttrium oxide
GOST 25702.11-1983 Raremetallic concentrates. Method for the determination of sulphur
GOST 25278.1-1982 Alloys and foundry alloys of rare metals. Methods for determination of aluminium
GOST 25278.2-1982 Alloys and foundry alloys of rare metals. Method for determination of vanadium
GOST 25278.3-1982 Alloys and foundry alloys of rare metals. Method for determination of hafnium
GOST 25278.4-1982 Alloys and foundry alloys of rare metals. Methods for determination of yttrium
GOST 25278.5-1982 Alloys and foundry alloys of rare metals. Method for determination of cobalt
GOST 25278.6-1982 Alloys and foundry alloys of rare metals. Methods for determination of molybdenum
GOST 25278.7-1982 Alloys and foundry alloys of rare metals. Methods for determination of niobium
GOST 25278.8-1982 Alloys and foundry alloys of rare metals. Method for determination of samarium
GOST 25278.9-1982 Alloys and foundry alloys of rare metals. Methods for determination of titanium
GOST 25278.10-1982 Alloys and foundry alloys of rare metals. Methods for determination of zirconium
GOST 22720.1-1977 Rare metals and their alloys. Methods for the determination of oxygen, hydrogen, nitrogen and carbon
GOST 24956-1981 Titanium and titanium alloys. Method for the determination of hydrogen
GOST 26318.11-1984 Non-metallic ore materials. Gravimetric method for determination of moisture mass fraction
GOST 26318.13-1984 Non-metallic ore materials. Method for determination of quartz mass fraction
GOST 25702.3-1983 Raremetallic concentrates. Method for the determination of ferrous oxide
GOST 21132.1-1998 Aluminium and aluminium alloys. Methods for determination of hydrogen in solid metal by vacuum hot extraction
GOST 21132.1-1981 Aluminium alloys. Measuring hydrogen content insolid metal by solid extraction method
GOST R ISO 4967-2015 Steel. Determination of content of nonmetallic inclusions. Micrographic method using standard diagrams
GOST 34061-2017 Welding and allied processes. Determination of hydrogen content in deposited metal and arc weld metal
GOST 25702.4-1983 Raremetallic concentrates. Method for the determination of iron (general)
GOST 25702.6-1983 Raremetallic concentrates. Method for the determination of calcium oxide
GOST 26318.3-1984 Non-metallic ore materials. Methods for determination of iron oxide mass fraction
GOST 25702.2-1983 Raremetallic concentrates. Method for the determination of barium oxide
GOST 25702.12-1983 Raremetallic concentrates. Method for the determination of strontium sulphate
GOST 25852-1983 Electric contacts from noble metals and their alloys. Specifications
GOST 17082.2-1995 Industrial essential oilseeds. Method for determination of moisture
GOST 17082.2-1988 Fruits of ethereal-oil crops. Industrial raw materials. Method of determining the moisture
GOST R 53218-2008 Organic fertilizers. Atomic-absorption method for determination of heavy metals content
GOST 26318.2-1984 Non-metallic ore materials. Method for determination of silica mass fraction
GOST 26318.5-1984 Non-metallic ore materials. Methods for determination of titanium dioxide mass fraction
GOST 26318.9-1984 Non-metallic ore materials. Method for determination of sulphir mass fraction
GOST 26318.12-1984 Non-metallic ore materials. Infra-red method for determination of moisture mass fraction
GOST 13170-1980 Ores and concentrates of non-ferrous metals. Method for determination of moisture content
GOST 25702.7-1983 Raremetallic concentrates. Methods for the determination of silicon dioxide
GOST 25702.14-1983 Raremetallic concentrates. Methods for the determination of titanium dioxide
GOST 25702.17-1983 Raremetallic concentrates. Method for the determination of zirconium dioxide

Korean Agency for Technology and Standards (KATS), Effect of metal content

KS I ISO 17072-2:2018 Leather — Chemical determination of metal content — Part 2: Total metal content
KS E ISO 621-2012(2017) Manganese ores－Determination of metallic iron content (metallic iron content not exceeding 2 %)－Sulphosalicylic acid photometric method
KS E ISO 621-2012(2022) Manganese ores－Determination of metallic iron content (metallic iron content not exceeding 2 %)－Sulphosalicylic acid photometric method
KS M 1948-2009 Acetic acid for industrial use－Method of test－Visual limit test for heavy metals (including iron)
KS I 30011-2012 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
KS D 1778-1993 General rules for determination of oxygen in metallic materials
KS D 1780-2016(2021) General rules for determination of carbon in metallic materials
KS I ISO 17072-1:2018 Leather — Chemical determination of metal content — Part 1: Extractable metals
KS M ISO 2070:2003 Aluminium oxide primarily used for the production of aluminium-Determination of calcium content
KS M ISO 2070:2013 Aluminium oxide primarily used for the production of aluminium－Determination of calcium content
KS D 1777-2011 General rules for determination of hydrogen in metallic materials
KS D 1780-2011 General rules for determination of carbon in metallic materials
KS D 1779-2011 General rules for determination of sulfur in metallic materials
KS D 1778-2008 General rules for determination of oxygen in metallic materials
KS E 3908-2015 Methods for sampling preparation and determination of moisture content of non-ferrous metal bearing ores
KS D 0034-1990
KS M ISO 6101-5:2019 Rubber — Determination of metal content by atomic absorption spectrometry — Part 5: Determination of iron content
KS H ISO 11212-2:2008 Starch and derived products－Heavy metals content－Part 2：Determination of mercury content by atomic absorption spectrometry
KS H ISO 11212-1:2008 Starch and derived products－Heavy metals content－Part 1：Determination of arsenic content by atomic absorption spectrometry
KS K 0731-2007 Test method for the determination of extractable heavy metals in textiles
KS M ISO 6101-5:2009 Rubber-Determination of metal content by atomic absorption spectrometry-Part 5:Determination of iron content
KS D ISO 3763:2002 Wrought steels－Macroscopic methods for assessing the content of non－metallic inclusions
KS M ISO 6101-2:2007 Rubber－Determination of metal content by atomic absorption spectrometry－Part 2：Determination of lead content
KS M ISO 6101-2-2007(2022) Rubber－Determination of metal content by atomic absorption spectrometry－Part 2：Determination of lead content
KS M ISO 6101-2-2007(2017) Rubber－Determination of metal content by atomic absorption spectrometry－Part 2：Determination of lead content
KS P ISO 8891:2003 Dental casting alloys with noble metal content of atleast 25 % but less than 75 %
KS P ISO 8891:2008 Dental casting alloys with noble metal content of atleast 25 % but less than 75 %
KS D ISO 4883-2003(2018) Hardmetals－Determination of contents of metallic elements by X－ray fluorescence－Solution method
KS D ISO 4503-2003(2018) Hardmetals－Determination of contents of metallic elements by X-ray fluorescence－Fusion method
KS D ISO 2738:2011 Sintered metal materials, excluding hardmetals-Permeable sintered metal materials-Determination of density, oil content and open porosity
KS D ISO 2738:2013 Sintered metal materials, excluding hardmetals-Permeable sintered metal materials-Determination of density, oil content and open porosity
KS E ISO 13543:2003 Copper, lead and zinc sulfide concentrates－Determination of mass of contained metal in a lot
KS E ISO 13543:2020 Copper, lead, zinc and nickel sulfide concentrates —Determination of mass of contained metal in a lot
KS M ISO 2069:2002 Aluminium oxide primarily used for the production of aluminium-Determination of calcium content-Flame atomic absorption method
KS M ISO 2071:2002 Aluminium oxide primarily used for the production of aluminium-Determination of zinc content-Flame atomic absorption method

KR-KS, Effect of metal content

KS I ISO 17072-2-2018 Leather — Chemical determination of metal content — Part 2: Total metal content
KS I ISO 17072-1-2018 Leather — Chemical determination of metal content — Part 1: Extractable metals
KS M ISO 6101-5-2019 Rubber — Determination of metal content by atomic absorption spectrometry — Part 5: Determination of iron content
KS P ISO 8891-2003 Dental casting alloys with noble metal content of atleast 25 % but less than 75 %
KS E ISO 13543-2020 Copper, lead, zinc and nickel sulfide concentrates —Determination of mass of contained metal in a lot

German Institute for Standardization, Effect of metal content

DIN EN ISO 17072-2:2022-12 Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2022); German version EN ISO 17072-2:2022
DIN EN ISO 17072-2:2019 Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2019)
DIN EN ISO 17072-2:2017 Leather - Chemical determination of metal content - Part 2: Total metal content (ISO/DIS 17072-2:2017); German and English version prEN ISO 17072-2:2017
DIN ISO 4503:1991 Hardmetals; determination of contents of metallic elements by x-ray fluorescence; fusion method; identical with ISO 4503:1978
DIN EN 16711-1:2016 Textiles - Determination of metal content - Part 1: Determination of metals using microwave digestion
DIN EN ISO 17072-1:2019-07 Leather - Chemical determination of metal content - Part 1: Extractable metals (ISO 17072-1:2019); German version EN ISO 17072-1:2019
DIN EN ISO 17072-2:2011 Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2011); German version EN ISO 17072-2:2011
DIN EN 2951:2019-08 Aerospace series - Metallic materials - Micrographic determination of content of non-metallic inclusions; German and English version EN 2951:2019
DIN ISO 4883:1991 Hardmetals; determination of contents of metallic elements by X-ray fluorescence; solution method; identical with ISO 4883:1978
DIN ISO 4491-4:1990 Metallic powders; determination of oxygen content by reduction methods; total oxygen by reduction-extraction; identical with ISO 4491-4:1989
DIN EN 2951:2019 Aerospace series - Metallic materials - Micrographic determination of content of non-metallic inclusions; German and English version EN 2951:2019
DIN EN 16711-1:2016-02 Textiles - Determination of metal content - Part 1: Determination of metals using microwave digestion; German version EN 16711-1:2015
DIN ISO 4491-1:1990 Metallic powders; determination of oxygen content by reduction methods; general guidelines; identical with ISO 4491-1:1989
DIN EN ISO 17072-1:2019 Leather - Chemical determination of metal content - Part 1: Extractable metals (ISO 17072-1:2019)
DIN EN ISO 4491-4:2012 Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction
DIN EN ISO 2738:2000-02 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999); German version EN ISO 2738:1999
DIN EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999); German version EN ISO 2738:1999
DIN EN ISO 4491-3:2006 Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen (ISO 4491-3:1997); English version of DIN EN ISO 4491-3:2006-06
DIN EN 16711-2:2016 Textiles - Determination of metal content - Part 2: Determination of metals extracted by acidic artificial perspiration solution

HU-MSZT, Effect of metal content

Indonesia Standards, Effect of metal content

SNI 07-6174-1999 Determiniation of carbon content in metals by titrimetric neutralized methods
SNI 07-6588-2001 Determination of carbon content in metals by gravimetric
SNI 07-6665-2002 Determination of sulphur content in metals by using of neutralized titrimetric
SNI 07-3652-1995 Steel - Determination of non metal inclusions - Micrographic method using standard diagram
SNI 07-2952-1992 Determination of non- metal inclusion in steel, Microscopic test method
SNI 7617-2013

YU-JUS, Effect of metal content

JUS H.H2.832-1990 Dentalcasting alloys with noble metal content of 25 % up to but not including 75%
JUS ISO 4503:1991 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Fusion method
JUS ISO 4883:1991 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. solution method
JUS C.A1.380-1988 Methods of chemical analysis of zine powder. Determination of metalic zine content. Volumetric me-thod
JUS C.A3.014-1987 Macroscopic methods for assessing the content of non-metallic inclusion in vvrought steels
JUS H.G8.397-1989 Reagents. Nitric acid. Determination of heavy metals content (as Pb). Colorimetric method
JUS H.G8.039-1981 Reagents. Sulphuric acid. Determination of heavy metals content (as Pb). Colorimetric method
JUS C.N2.005-1988 Powder metallurgy. Sintered metal materials, excluding hardmetals. PrepaPowder metallurgy. Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content

Group Standards of the People's Republic of China, Effect of metal content

T/HJZB 001-2017 High content of precious metal jewelry
T/FHZY 001-2018 High content of precious metal jewelry

CZ-CSN, Effect of metal content

CSN 42 0648 Cast.12-1987 Metallic chromium. Determination of tin content
CSN ISO 4491-4:1993 Metallic powders. Determination of oxygen content by reduction methods
CSN 42 0480-1982 Aluminium and aluminium alloys. Determination of hydrogen content in liquid mettal
CSN 44 1703-1979 Non-ferrous ores and concentrates. Method for determination of moisture content
CSN 42 0890 Cast.8-1981 Testing of metal powders. Determination of water content in metal powders by elektrometric titration
CSN 65 2106-1986 Potassium hydroxide for industrial use. Determination of heavy metals content. Hydrogen sulphide method
CSN 42 0890 Cast.16-1985 Testing of metal powders. Determination of lubricant content
CSN 65 2479-1981 Sodium Chloride (Salt) Colorimetric Method of Heavy Metals Content Determination
CSN 44 1575 Cast.8-1972 Chemical analysis of manganese ores. Determination of metallic iron concent
CSN 56 0065-1985 Methods of sample mineralization before the determination of heavy metals content in the foodstuffs
CSN 42 0890 Cast.15-1986 Testing of metal powders. Gravimetric method for detBrmination of acid-insoluble residue content

Lithuanian Standards Office , Effect of metal content

LST EN ISO 17072-2:2011 Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2011)
LST EN ISO 17072-1:2011 Leather - Chemical determination of metal content - Part 1: Extractable metals (ISO 17072-1:2011)
LST EN 24883-2001 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Solution method (ISO 4883:1978)
LST EN 24503-2001 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method (ISO 4503:1978)

AENOR, Effect of metal content

UNE-EN ISO 17072-2:2011 Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2011)
UNE 48292:2005 Metallic zinc content in zinc rich paints.
UNE-EN ISO 17072-1:2011 Leather - Chemical determination of metal content - Part 1: Extractable metals (ISO 17072-1:2011)
UNE 22144:1990 DIRECT REDUCED IRON. DETERMINATION OF METALLIC IRON CONTENT. TITRIMETRIC METHOD.

ES-UNE, Effect of metal content

UNE-EN ISO 17072-2:2023 Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2022)
UNE-EN ISO 17072-1:2020 Leather - Chemical determination of metal content - Part 1: Extractable metals (ISO 17072-1:2019)
UNE-EN 24503:1993 HARDMETALS. DETERMINATION OF CONTENT OF METALLOC ELEMENTS BY X-RAY FLUORENSCENCE. FUSION METHOD (Endorsed by AENOR in May of 1993.)
UNE-EN 16711-1:2016 Textiles - Determination of metal content - Part 1: Determination of metals using microwave digestion
UNE-EN 24883:1993 HARDMETALS. DETERMINATION OF CONTENTS OF METALLIC ELEMENTS BY X-RAY FLUORESCENCE. SOLUTION METHOD. (Endorsed by AENOR in May of 1993.)
UNE-EN 2951:2019 Aerospace series - Metallic materials - Micrographic determination of content of non-metallic inclusions (Endorsed by Asociación Española de Normalización in July of 2019.)

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Effect of metal content

IPC TM-650 2.2.20-1995 Solder Paste Metal Content by Weight

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Effect of metal content

GB/T 21198.4-2007 Determination of precious metals in precious metals jewellery alloys.Method using ICP spectrometry.Part 4: 999‰ precious metals jewellery alloys.Determination of precious metals.Difference method
GB/T 21198.1-2007 Determination of precious metals in precious metals jewellery alloys- Method using ICP spectrometry- Part 1: Platinum jewellery alloys- Determination of platinum-Method using a solution with yttrium as internal standard element
GB/T 21198.3-2007 Determination of precious metals in precious metals jewellery alloys.Method using ICP spectrometry.Part 3: Palladium jewellery alloys.Determination of palladium.Method using a solution with yttrium as internal standard element
GB/T 12684.8-1990 Boric acid for industrial use--Determination of heavy metal content
GB/T 4702.2-2008 Chromium metal. Determination of silicon content. The perchloric acid gravimetric method
GB/T 21198.5-2007 Determination of precious metals in precious metals jewellery alloys.Method using ICP spectrometry.Part 5: 999‰silver jewellery alloys.Determination of silver.Difference method
GB/T 21198.2-2007 Determination of precious metals in precious metals j ewellery alloys.Method using ICP spectrometry.Part 2：Platinum jewellery alloys--Determination of platinum.Method using the intensity ratios of all minor constituents with reference to platinum
GB/T 7532-1987 Organic products for industrial use--Determination of content of heavy metals content--General method--Visual limit test
GB/T 21198.6-2007 Determination of precious metals in precious metals jewellery alloys-Method using ICP spectrometry-Part 6:Difference method
GB/T 6276.9-1986 Ammonium hydrogen carbonate for industrial use--Determination of heavy metal content--Visible turbidimetric method
GB 7532-1987 Organic chemical products－Determination of heary metals content－General method－Visual limit test
GB/T 5158.4-2001 Metallic powders--Determination of total oxygen content by reduction-extraction
GB/T 4164-2002 Metallic powders--Determination of Hydrogen-reducible oxygen content
GB/T 4164-2008 Metallic powder.Determination of hydrogen reducible oxygen content
GB/T 17473.1-2008 Test method of precious metals pastes used for microelectronics.Determination of solids content
GB/T 26050-2010 Hardmetals.Determination of contents of metallic elements by X-ray fluorescence.Fusion method
GB/T 14834-1993 Rubber, vulcanized. Determination of adhesion to, and corrosion of, metals

AT-ON, Effect of metal content

OENORM EN ISO 17072-2:2021 Leather - Chemical determination of metal content - Part 2: Total metal content (ISO/DIS 17072-2:2021)

RO-ASRO, Effect of metal content

STAS 2615/6-1984 TIN SOLDERING METALS Aluminium content determination
STAS 2771/6-1970 WHITE METAL BEARING AI.I.OYS Dotennin.Ttion of ircn
STAS 8971-1987 Metals soldering HARD SOLDERS WITH SILVER CONTENT
STAS 6842-1989 CAST IRONS AND STEELS Aluminium content deterrnination
STAS 9965-1974 Metal powders DETERMINATION OF WATER CONTENT
STAS 2615/10-1984 TIN SOLDERING METALS Silver content determination
STAS 2615/8-1984 TIN SOLDERING METALS Arsenic content determination
STAS 9144/2-1986 Zinc powder DETERMINATION OF METALLIC ZINC CONTENT
STAS 2771/5-1970 WHITE mktal bearixg alloys Dctcrniination of lead
STAS 10956/3-1977 Metal powders ALUMINIUM POWDERS Determination of active aluminium content
STAS 1314/25-1977 MANGANESE ORES AND CONCENTRATES Determination of metallic iron content
STAS 10552-1976 DETERMINATION OF THE DELTA-FERRITE CONTENT IN THE DEPOSITED METAL BY WELDING OF AUSTENITICAL STEELS Microscopic method
STAS SR ISO 3763:1976 Wrought steels. Macroscopic methods for assessing the content of non-metallic inclusions
STAS 4605/13-1972 NON-METAT, BEARING MIXIXG PRODUCTS WITH CARBONATE CONTENT DCtermination of sulphate ion and tolal sulphur
STAS 5949/2-1983 DETERMINATION OF NONMETALIC STEELS Automatic method
STAS 4605/2-1974 NON-METAL-BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determination of moisture content
STAS 12446-1986 Mineral oils for metals working PLO 81 OIL

国家市场监督管理总局、中国国家标准化管理委员会, Effect of metal content

GB/T 38145-2019 High content precious metals jewellery alloys—Determination of gold，platinum and palladium—Difference method using inductively coupled plasma optical emission spectroscopy
GB/T 22930.2-2021 Leather and fur—Chemical determination of metal content—Part 2: Total metal content
GB/T 40114-2021 Jewellery—Determination of precious metal content—Difference method using inductively coupled plasma optical emission spectroscopy
GB/T 22930.1-2021 Leather and fur—Chemical determination of metal content—Part 1:Extractable metals
GB/T 38086-2019 Determination of metallothionein (MT) in biological samples
GB/T 38596-2020 Determination method of heavy metal contents in the wastewater during catalyst production

Professional Standard - Chemical Industry, Effect of metal content

HG/T 3941-2007;HG/T 3942-2007 Determination of Moisture Content in Industrial Liquid Chlorine Coulometric Method Determination of Metal and Non-metal Ion Content in Industrial Sodium Hydroxide
HG/T 3942-2007 Sodium hydroxide for industrial use.Determination of metal and nonmetal ions content.ICP method
HG/T 5043-2016 Phosphorus pentachloride for industrial use.Determination of heavy metal content.Visual colorimetry
HG/T 4209-2011 Phosphorus trichloride for industrial use.determination of heavy metal content-visual colorimetry
HG/T 4212-2011 Phosphorus oxychloride for industrial use.determination of heavy metal content.visual colorimetry

(U.S.) Ford Automotive Standards, Effect of metal content

FORD FLTM AZ 001-02-2000 DETERMINATION OF METAL CONTENT OF ACID PICKLING BATH
FORD FLTM AZ 001-2-2000 DETERMINATION OF METAL CONTENT OF ACID PICKLING BATH

PL-PKN, Effect of metal content

PN H04805-03-1991 Zinc powder Determination of metallic zinc content
PN H04706-1991 Non-ferrous metals and alloys. Determination of sulfur content
PN H04707-1991 Non-ferrous metals and alloys. Determination of carbon content
PN C81549-13-1986 Paints and Varnishes Determination of toxic metals content Determination of toxic metals content in hydrochlorid acid extracts Determination of lead content
PN C81549-14-1986 Paints and Varnishes Determination of toxic metals content Determination of toxic metals content in hydrochlorid acid extracts Determination of antimonu content
PN C81549-15-1986 Paints and Varnishes Determination of toxic metals content Determination of toxic metals content in hydrochlorid acid extracts Determination of arsenie content
PN C81549-16-1986 Paints and Varnishes Determination of toxic metals content Determination of toxic metals content in hydrochlorid acid extracts Determination of cadmium content
PN C81549-17-1986 Paints and Varnishes Determination of toxic metals content Determination of toxic metals content in hydrochlorid acid extracts Determination of mercury content
PN C81549-18-1986 Paints and Varnishes Determination of toxic metals content Determination of toxic metals content in hydrochlorid acid extracts Determination of chromium content
PN C81549-19-1986 Paints and Varnishes Determination of toxic metals content Determination of toxic metals content in hydrochlorid acid extracts Determination of copper content
PN C81549-20-1986 Paints and Varnishes Determination of toxic metals content Determination of toxic metals content in hydrochlorid acid extracts Determination of manganese content
PN C81549-21-1986 Paints and Varnishes Determination of toxic metals content Determination of toxic metals content in hydrochlorid acid extracts Determination of barium content
PN H04965-1992 Metallic powders Determination of acidinsoluble content
PN C81549-03-1986 Paints and Varnishes Determination of toxic metals content Determination of total lead content
PN C81549-04-1986 Paints and Varnishes Determination of toxic metals content Determination of total antimony content
PN C81549-05-1986 Paints and Varnishes Determination of toxic metals content Determination of total arsenie content
PN C81549-06-1986 Paints and Varnishes Determination of toxic metals content Determination of total cadmium content
PN C81549-07-1986 Paints and Varnishes Determination of toxic metals content Determination of total mercury content
PN C81549-08-1986 Paints and Varnishes Determination of toxic metals contentDetermination of total chromium content
PN C81549-09-1986 Paints and Varnishes Determination of toxic metals content Determination of total copper content
PN C81549-11-1986 Paints and Varnishes Determination of toxic metals content Determination of barium content
PN H04232-01-1986 Chemical analysis of alloy components Chromium metallic General directives
PN H04232-02-1986 Chmical analysis of alloy components Chromium metallic Determination of chromium
PN H04232-03-1986 Chemical analysis of alloy components Chromium metallic Determination of carbon
PN H04232-04-1986 Chemical analysis of alloy components Chromium metallic Determination of silicium
PN H04232-05-1986 Chemical analysis of alloy components Chromium metallic Determination of phosphore
PN H04232-06-1986 Chemical analysis of alloy components Chromomium metallc Determination of ferrum
PN H04232-07-1986 Chemical analysis of alloy components Chromium metallic Determination of sulphur
PN H04232-08-1986 Chemical analysis of alloy components Chromium metallic Determination of nitrogen
PN H04232-09-1986 Chemical analysis of alloy components Chromium metallic Determination of aluminium
PN H04232-10-1986 Chemical analysis of alloy components Chromium metallic Determination of copper
PN H04232-11-1986 Chemical analysis of alloy components Chromium metallic Determination of cobalt
PN H04232-12-1986 Chemical analysis of alloy components Chromium metallic Determinatiop of tin
PN H04232-13-1986 Chemical analysis of alloy components Chromium metallic Determination of antimone
PN H04232-14-1986 Chemical analysis of alloy components Chromium metallic Determination of arsenic
PN H04232-15-1986 Chemical analysis of alloy components Chromium metallic Determination of arsenic
PN C81549-10-1986 Paints and Varnishes Determination of toxic metals content Determination of total manganese content
PN C84039-09-1988 Potassium hydroxide technical Determination of heavy metals content
PN H04964-1991 Metallic powders. Determination of oxygen content by hydrogen-reducible method
PN C04570-09-1987 Water and wa"te water Tests for metals by atomie absorption spectrometry Determination of Cr(VI) and Cr(III)
PN C81549-12-1986 Paints and Varnisches Determination of toxic metals content Determination of toxic metals content in hydrochlorid acid extracts Preparation of acid extracts from dried paint films
PN H04124-1985 Chemical analysis of iron ores Determination of metallic iron content

Professional Standard - Textile, Effect of metal content

FZ/T 50060-2022 Carbon Fiber Alkali Metal and Alkaline Earth Metal Content Test Method

Taiwan Provincial Standard of the People's Republic of China, Effect of metal content

CNS 3791-1999 Method of test for metal in canned food-Determination of tin

Professional Standard - Ferrous Metallurgy, Effect of metal content

YB/T 148-1998 Standard test method for the content of metallic iron in steel slag used in cement
YB/T 4188-2015 Test method for the content of magnetic metallic iron in steel slag
YB/T 4188-2009 Determination method of magnetic metal iron content in steel slag
YB/T 4227-2010 Determination method of metal content in stainless steel slag

SG-SPRING SG, Effect of metal content

CP 9-1988 CODE OF PRACTICE ON The Description And Marking Of Articles Of, Or Containing Precious Metal

Professional Standard - Coal, Effect of metal content

MT/T 1074-2008 Classification for alkali metal (potassium, sodium) content in coal

国家安全生产监督管理总局, Effect of metal content

MT/T 1074-2007 Alkali metal (potassium, sodium) content classification in coal

Professional Standard - Medicine, Effect of metal content

YY 0626-2008 Dental casting alloys with noble metal content of at least 25% but less than 75%

Japanese Industrial Standards Committee (JISC), Effect of metal content

JIS T 6122:2005 Dental casting alloys with noble metal content of at least 25 % but less than 75 %
JIS T 6122:2012 Dental casting alloys with noble metal content of at least 25 % but less than 75 %
JIS Z 3113:1975 Method for measurement of hydrogen evolved from deposited metal
JIS Z 2613:1992 General rules for determination of oxygen in metallic materials
JIS K 0083:1997 Method for determination of metals in flue gas
JIS K 0083:2006 Methods for determination of metals in flue gas
JIS Z 3118:2022 Determination of diffusible hydrogen content in steel weld metal
JIS K 0083:2017 Methods for determination of metals in flue gas
JIS T 6122:2022 Dental casting alloys with noble metal content of at least 25 % but less than 75 %
JIS T 6125:2005 Dental wrought low gold content alloys

American Society for Testing and Materials (ASTM), Effect of metal content

ASTM D4185-06(2011) Standard Practice for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
ASTM E1245-95 Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
ASTM E1245-00 Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
ASTM E191-64(2017) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
ASTM E1245-03 Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
ASTM D8371-20 Standard Test Method for Trace Metal Content Analysis in Carbon Black
ASTM E1941-10 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis

Professional Standard - Agriculture, Effect of metal content

香港规例第132V章 Food Adulteration (Metallic Contamination) Regulations

未注明发布机构, Effect of metal content

GOST ISO 17072-1-2021 Leather.Chemical determination of metal content.Part 1.Extractable metals

SE-SIS, Effect of metal content

SIS SS 11 11 16-1987 Steel - Method for assessment of the content of non-metallic inclusions - Microscopic methods - Jernkontorets inclusion chart II for the assessment of non-metallic inclusions
SIS 11 73 10-1974 Permeable sintered metal materials. Determination of oil content
SIS SS-ISO 4524/4:1987 Meta I lic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 4: Determination of gold content

Malaysia Standards, Effect of metal content

Sichuan Provincial Standard of the People's Republic of China, Effect of metal content

DB51/T 1790-2014 Determination of total lead content in non-metallic shoe materials

Professional Standard - Automobile, Effect of metal content

QC/T 1003-2015 Determination of precious metal in metal support catalytic converter for motorcycles

TR-TSE, Effect of metal content

TS 656-1968 METHODS OF CHEMICAL ANALYSIS OF MANGANESE ORES DETERMINATION OF METALLIC IRON CONTENT (Photometric method for metallic iron content up to and ?ncluding 2 %)
TS 2309-1976 PERMEABLE SINTERED METAL MATERIALS - DETERMINATION OF OIL CONTENT
TS 3088-1978 WRODGHT STEELS Macroscopic Methods for Assessing the Content of Non-metallic Inclusions

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Effect of metal content

GB/T 35761-2017 Determination methods of heavy metal element content in printing ink or painting of fireworks and firecracker

IT-UNI, Effect of metal content

UNI 5821-1966
UNI 5823-1978
UNI 3349-1953 Procedures for the chemical analysis of metals. Determination of the silicon content of ferromanganese and of manganese metal. Gravimetric method.

WRC - Welding Research Council, Effect of metal content

BULLETIN 318-1986 FACTORS INFLUENCING THE MEASUREMENT OF FERRITE CONTENT IN AUSTENITIC STAINLESS STEEL WELD METAL USING MAGNETIC INSTRUMENTS ; MEASUREMENTS OF FERRITE CONTENT IN AUSTENITIC STAINLESS STEEL WELD METAL GI
BULLETIN 519- STAINLESS STEEL WELD METAL – PREDICTION OF FERRITE CONTENT
BULLETIN 342-1989 STAINLESS STEEL WELD METAL: PREDICTION OF FERRITE CONTENT

NL-NEN, Effect of metal content

NEN 2785-1990 Air quality - Ambient air - Collection of particulate matter for the determination of the content of metals - HVS-method
NEN-ISO 4503:1993 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Fusion method (ISO 4503:1978)
NEN-ISO 4883:1993 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Solution method (ISO 4883:1978)
NEN-ISO 4491-4:1993 Metallic powders. Determination of oxygen content by reduction methods. Part 4: Total oxygen by reduction-extraction (ISO 4491-4:1989)

Military Standard of the People's Republic of China-General Armament Department, Effect of metal content

GJB 311-1987 Determination of wear metal content in aviation lubricants
GJB 770.204-1994 Test methods for gunpowder analysis - Determination of content of metals and metal compounds - Complexometric titration method

American Welding Society (AWS), Effect of metal content

WRC 342:1989 Stainless Steel Weld Metal: Prediction Of Ferrite Content

BE-NBN, Effect of metal content

NBN-EN 28891-1992 Dental casting alloys with noble metal content of 25 % up to but not including 75 % (ISO 8891:1990)
NBN I 07-004-1986

AASHTO - American Association of State Highway and Transportation Officials, Effect of metal content

DIVISION I 11.3-1996 Soil-Metal Plate Interaction Systems

Professional Standard - Aviation, Effect of metal content

HB 20094.3-2012 Test method for determination of wear metals in operating liquid for aviation.Part 3: Energy dispersion X-ray fluorescence spectrometry
HB 20094.4-2012 Test method for determination of wear metals in operating liquid for aviation.Part 4: Scanning electron microscopy and energy dispersive spectrometry

Standard Association of Australia （SAA）, Effect of metal content

AS 2278:2000 Metal aerosol dispensers of capacity 50 mL to 1000 mL inclusive
AS 2197:1978 Method for the micrographic assessment of the non-metallic inclusion content in wrought steel
AS 1580.504.1:2005 Paints and related materials - Methods of test - Metallic zinc content

European Association of Aerospace Industries, Effect of metal content

AECMA PREN 2951-1997 Aerospace Series Metallic Materials Test Method Micrographic Determination of Content of Non-Metallic Inclusions Edition P 1

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Effect of metal content

PREN 2951-1997 Aerospace Series Metallic Materials Test Method Micrographic Determination of Content of Non-Metallic Inclusions (Edition P1)
PREN 2951-2017 Aerospace series Metallic materials Test method Micrographic determination of content of non-metallic inclusions (Edition P 2)