ZH
RU
ES

Test Center English

Test Center English, Total:482 items.

In the international standard classification, Test Center English involves: Information sciences. Publishing, Medical equipment, Space systems and operations, Railway engineering in general, Road vehicle systems, Diagnostic, maintenance and test equipment, Industrial automation systems, Television and radio broadcasting, Test conditions and procedures in general, Aircraft and space vehicles in general, Fibre optic communications, Machine tool systems, Telecommunication systems, Installations in buildings, Telecommunications in general, Laboratory medicine, Information technology (IT) in general, Electrical engineering in general, Packaging and distribution of goods in general, Character sets and information coding, Construction materials, Electrical accessories, Electrical wires and cables, Road vehicles in general, Insulation, Flexible drives and transmissions, Welding, brazing and soldering, Components for aerospace construction, Ceramics, Kitchen equipment, Applications of information technology, Paper and board, Fuels, Protection of and in buildings, Lubricants, industrial oils and related products, Accident and disaster control, Interface and interconnection equipment, Leather technology, Linear and angular measurements, Materials for aerospace construction, Coatings and related processes used in aerospace industry, Crude petroleum, Lamps and related equipment, Solar energy engineering, Electricity. Magnetism. Electrical and magnetic measurements, Water quality, Insulating materials, Galvanic cells and batteries, Environmental testing, Fertilizers, Measurement of volume, mass, density, viscosity, Paints and varnishes, Aerospace electric equipment and systems, Road engineering, Microbiology, Paint ingredients, Electronic components in general, Pipeline components and pipelines, Electromechanical components for electronic and telecommunications equipment, Protection against fire, Products of the chemical industry, Sports equipment and facilities, Mining and quarrying, Analytical chemistry, Earthworks. Excavations. Foundation construction. Underground works, Structures of buildings, Cans. Tins. Tubes, Telecommunication services. Applications, Mobile services, Fluid storage devices, Components and accessories for telecommunications equipment, Reinforced plastics, Earth-moving machinery, Elements of buildings, Passenger cars. Caravans and light trailers, Semiconductor devices, Equipment for entertainment.

GM Europe, Test Center English

GME L0004-2008 Pr黤鰈 Test Oil English/German
GME GMI 60288-2001 Abrasion Test for Textile Fabrics (English/German)
GME OPEL 298-1987 Compatibility Test for Underbody Protective Wax (English/German)
GME GMI R-7B03-7-1999 High Speed and Oil Spillage Test of Vehicles with Automatic Transmission (English/German)
GME OPEL 107-1979 Microscopic Test of Cast Iron by Means of Structure Rating Charts (English/German)
GME GMI L-7B01D-14-1998 FWD Output Gear Toothing Fatigue Test (English/German; Includes Appendix 1; ITDC Release, Draft for Harmonization)
GME 60279-1997 Determination of Not Used Hexapotential in Textile Fibre Fleece Moulded Parts Bonded with Phenolic Resin (English/German)
GME GMI L-7B01D-9-1997 Fatigue Test of External Shift Mechanism FWD and RWD Manual Transmission (English/German; ITDC Release, Draft for Harmonization)
GME GMI 60336-2000 W盲rmealterung von Polsterbez眉gen Test Method for Determining the Heat Ageing Resistance of Upholstery Trim Materials English/German [Replaced: GME GME 60336]
GME OPEL 280-2012 Hot Finger Test for Testing of Coolant Protection Agents (Revision 2; English/German; This standard may be applied only for current programs. It is inactive for all future projects and without replacement)

ISUZU - Isuzu Motors Ltd., Test Center English

ISC-C74-203A-1996 Test Diesel Fuel (ADR) (Japanese/English Version)
ISC-F20-026A-2011 Acid Rain Resistance Test Procedure (Japanese/English Version)
INDEX VOLUME 1-2003 Material and Test Methods - Metals (Japanese/English Version)
INDEX VOLUME 3-2007 MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
ISC-E00-007-1979 Physical Testing Methods for Vulcanized Rubber (Japanese/English Version)
ISC-F22-020A-2017 Test procedures for basic performance of plastic parts (Japanese/English Version)
INDEX-2000 Total Index of Material Specifications and Test Methods (Japanese/English Version)
INDEX VOLUME 1-2000 Material Specifications and Test Methods - Volume 1 Metals (Japanese/English Version)
INDEX VOLUME 1-2001 Material Specifications and Test Methods - Volume 1 Metals (Japanese/English Version)
INDEX VOLUME 6-2003 Material Specifications and Test Methods - Volume 6 Miscellaneous (Japanese/English Version)
INDEX VOLUME 2-2000 Material Specifications and Test Methods - Volume 2 Adhesives@ Sealers (Japanese/English Version)
INDEX VOLUME 6-2002 Material Specifications and Test Methods - Volume 6 Miscellaneous (Japanese/English Version)
INDEX VOLUME 3-2002 Material Specifications and Test Methods - Volume 3 Coatings (Japanese/English Version)
INDEX VOLUME 5-2001 Material Specifications and Test Methods - Plastics and Rubbers (Japanese/English Version)
INDEX VOLUME 2-2002 Material Specifications and Test Methods - Volume 2 Adhesives@ Sealers (Japanese/English Version)
INDEX VOLUME 1-2002 Material Specifications and Test Methods - Volume 1 Metals (Japanese/English Version)
INDEX VOLUME 6-2004 Material Specifications and Test Methods - Volume 6 Miscellaneous (Japanese/English Version)
INDEX VOLUME 6-2000 Material Specifications and Test Methods - Volume 6 Miscellaneous (Japanese/English Version)
INDEX VOLUME 2-2005 Material Specifications and Test Methods - Volume 2 Adhesive@ Sealer (Japanese/English Version)
INDEX VOLUME 1-2008 Material Specifications and Test Methods - Volume 1 Metals (Japanese/English Version)
INDEX VOLUME 3-2000 Material Specifications and Test Methods - Volume 3 Coatings (Japanese/English Version)
INDEX VOLUME 2-2001 Material Specifications and Test Methods - Volume 2 Adhesives@ Sealers (Japanese/English Version)
INDEX VOLUME 6-2001 Material Specifications and Test Methods - Volume 6 Miscellaneous (Japanese/English Version)
INDEX VOLUME 3-2001 Material Specifications and Test Methods - Volume 3 Coatings (Japanese/English Version)
INDEX VOLUME 2-2003 Material Specifications and Test Methods - Volume 2 Adhesives@ Sealers (Japanese/English Version)
INDEX VOLUME 5-2000 Material Specifications and Test Methods - Volume 5 Plastics@ Rubber (Japanese/English Version)
ISC-F20-021A-2011 Tack-free Time of Adhesive and Sealing Material Test Procedure (Japanese/English Version)
INDEX VOLUME 5-2003 Material Specifications and Test Methods - Volume 5 Plastics and Rubber (Japanese/English Version)
INDEX VOLUME 5-2004 Material Specifications and Test Methods - Volume 5 Plastics and Rubbers (Japanese/English Version)
INDEX VOLUME 5-2002 Material Specifications and Test Methods - Volume 5 Plastics and Rubber (Japanese/English Version)
INDEX VOLUME 6-2005 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
INDEX VOLUME 6-2013 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
INDEX VOLUME 6-2006 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
INDEX VOLUME 6-2010 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
INDEX VOLUME 6-2008 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
INDEX VOLUME 6-2014 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
INDEX VOLUME 6-2007 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
INDEX VOLUME 6-2011 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
INDEX VOLUME 6-2009 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2010 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2013 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2012 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2006 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2009 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2004 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2008 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2003 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2005 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2014 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 4-2004 Material Specifications and Test Methods - Volume 4 Fuels@ Lubes@ and Coolants (Japenese/English Version)
INDEX VOLUME 4-2003 Material Specifications and Test Methods - Volume 4 Fuels@ Lubes@ and Coolants (Japenese/English Version)
INDEX VOLUME 5-2011 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
INDEX VOLUME 5-2008 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
INDEX VOLUME 5-2009 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
INDEX VOLUME 5-2010 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
INDEX VOLUME 5-2005 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
INDEX VOLUME 5-2006 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
INDEX VOLUME 5-2013 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
INDEX VOLUME 2-2004 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Adhesive/Sealer BILINGUAL (Japanese/English Version)
INDEX VOLUME 2-2011 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Adhesive/Sealer BILINGUAL (Japanese/English Version)
INDEX VOLUME 2-2008 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Adhesive/Sealer BILINGUAL (Japanese/English Version)
INDEX VOLUME 2-2007 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Adhesive/Sealer BILINGUAL (Japanese/English Version)
INDEX VOLUME 2-2009 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Adhesive/Sealer BILINGUAL (Japanese/English Version)
INDEX VOLUME 2-2006 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Adhesive/Sealer BILINGUAL (Japanese/English Version)
INDEX VOLUME 4-2007 ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Fuels/Lubricants & Coolant BILINGUAL (Japenese/English Version)
INDEX VOLUME 4-2008 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS-Fuels/Lubricants & Coolant BILINGUL (Japanese/English Version)
INDEX VOLUME 4-2009 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Fuels/Lubricants & Coolant BILINGUAL (Japanese/English Version)
INDEX VOLUME 4-2011 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Fuels/Lubricants & Coolant BILINGUAL (Japanese/English Version)
INDEX VOLUME 4-2014 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Fuels/Lubricants & Coolant BILINGUAL (Japanese/English Version)
INDEX VOLUME 4-2010 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Fuels/Lubricants & Coolant BILINGUAL (Japanese/English Version)
INDEX VOLUME 4-2013 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS-Fuels/Lubricants & Coolant BILINGUAL (Japanese/English Version)

Indonesia Standards, Test Center English

SNI 19-1951-1990 Directory of libraries, information and documentation center

German Institute for Standardization, Test Center English

DIN 58220-3:2021 Visual acuity testing - Part 3: Test for use in expertise; Text in German and English
DIN 58220-3:2013 Visual acuity testing - Part 3: Test for use in expertise; Text in German and English
DIN EN 16602-20-07:2016 Space produce assurance - Quality and safety assurance for space test centres; English version EN 16602-20-07:2016
DIN 58220-5:2013 Visual acuity testing - Part 5: Vision screening test for general use; Text in German and English
DIN 58220-5:2021 Visual acuity testing - Part 5: Vision screening test for general use; Text in German and English
DIN 58220-7:2013 Visual acuity testing - Part 7: Mesopic contrast vision, without and with glare, for road traffic related vision testing; Text in German and English
DIN 58220-7:2021 Visual acuity testing - Part 7: Mesopic contrast vision, without and with glare, for road traffic related vision testing; Text in German and English
DIN EN 12417:2009 Machine tools - Safety - Machining centres (includes Amendment A2:2009); English version of DIN EN 12417:2009-07
DIN 58220-6:2021 Visual acuity testing - Part 6: Road traffic related vision screening test; Text in German and English
DIN 58220-6:2013 Visual acuity testing - Part 6: Road traffic related vision screening test; Text in German and English
DIN 70080:2020 Electric road vehicles - Test procedures for determination of charging performance; Text in English
DIN EN 16603-10-03:2022 Space engineering - Testing; English version EN 16603-10-03:2022
DIN EN 16603-10-03:2021 Space engineering - Testing; English version prEN 16603-10-03:2021
DIN 58141-9:2013 Measurement of fiber optic elements - Part 9: Determination of deviation of the roundness and the concentricity of optical fibres; Text in German and English
DIN EN IEC 61744:2021 Calibration of fibre optic chromatic dispersion test sets (IEC 86/569/CD:2020); Text in English
DIN 58931:2010 Haematology - Determination of haemoglobin concentration in blood - Reference method; Text in German and English
DIN EN 17125:2019 Domestic spas/whirlpool spas/hot tubs - Safety requirements and test methods
DIN EN 17125:2019-06 Domestic spas/whirlpool spas/hot tubs - Safety requirements and test methods; German version EN 17125:2018
DIN 58932-3:2017 Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrozytes; Text in German and English
DIN 58905-1:2016 Haemostaseology - Blood collection - Part 1: Preparation of plasma from citrated venous blood for coagulation testing; Text in German and English
DIN EN ISO 20200:2023 Plastics - Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test (ISO/DIS 20200:2022); German and English version prEN ISO 20200:2022
DIN EN 12504-1:2009 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression; English version of DIN EN 12504-1:2009-07
DIN EN 4662:2010 Aerospace series - Test specification for vibration control components; German and English version EN 4662:2010
DIN EN 4862:2021 Rotorcraft - Constant Wear Lifejackets - Requirements, testing and marking; English version prEN 4862:2021
DIN EN ISO 19105:2020 Geographic information - Conformance and testing (ISO/DIS 19105:2020); English version prEN ISO 19105:2020
DIN CEN/TS 15867:2009 Advanced technical ceramics - Ceramic composites - Guide to the determination of the degree of misalignment in uniaxial mechanical tests; German version CEN/TS 15867:2009
DIN EN 13975:2003 Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects; German version EN 13975:2003, German and English texts
DIN EN ISO 15027-3:2023 Immersion suits - Part 3: Test methods (ISO/DIS 15027-3:2023); German and English version prEN ISO 15027-3:2023
DIN EN 17163:2017 Pulp, paper and board - Determination of primary aromatic amines (PAA) in a water extract by a LC/MS/MS method; German and English version prEN 17163:2017
DIN EN ISO 13520:2023 Determination of ferrite content in austenitic stainless steel castings (ISO/FDIS 13520:2022); German and English version prEN ISO 13520:2022
DIN EN 17181:2017 Lubricants - Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution - Test method based on CO2-production; German and English version prEN 17181:2017
DIN SPEC 91461:2021 Stress-testing resilience of critical infrastructures exposed to cyber-physical threats; Text in English
DIN EN ISO 7965-1:2023 Packaging - Drop test - Part 1: Paper sacks (ISO/DIS 7965-1:2023); German and English version prEN ISO 7965-1:2023
DIN EN 3094:2018-01 Aerospace series - Sealants - Test method - determination of the application time; German and English version EN 3094:2017
DIN EN 4875:2020-03 Aerospace series - Surface treatments - Test method for measurement of electrical contact resistance; German and English version EN 4875:2020
DIN EN ISO 13585:2023 Brazing - Qualification testing of brazers and brazing operators (ISO 13585:2021); German and English version prEN ISO 13585:2023
DIN EN 16602-70-45:2015 Space product assurance - Mechanical testing of metallic materials; English version EN 16602-70-45:2014
DIN EN 16141:2023-07 Conservation of cultural heritage - Guidelines for management of environmental conditions - Open storage facilities: definitions and characteristics of collection centres dedicated to the preservation and management of cultural heritage; German and Eng...
DIN EN 3102:2013 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility; German and English version EN 3102:2013
DIN EN 4195:2012 Aerospace series - Paints and varnishes - Test method for determination of chromate leaching; German and English version EN 4195:2011
DIN EN ISO 9862:2023 Geosynthetics - Sampling and preparation of test specimens (ISO/DIS 9862:2022); German and English version prEN ISO 9862:2022
DIN EN 17125:2017 Domestic spas and hot tubs - Safety requirements and test methods; German and English version prEN 17125:2017
DIN EN 16602-20-07:2016-12 Space produce assurance - Quality and safety assurance for space test centres; English version EN 16602-20-07:2016
DIN EN 61341:2012 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps (IEC/TR 61341:2010); German version EN 61341:2011
DIN EN 17178:2017 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence; German and English version prEN 17178:2017
DIN EN 4171:2012 Aerospace series - Paints and varnishes - Test method for determination of phosphoric acid index; German and English version EN 4171:2011
DIN EN 4592:2007-09 Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance; German and English version EN 4592:2006
DIN EN 60212:2011 Standard conditions for use prior to and during the testing of solid electrical insulating materials (IEC 60212:2010); German version EN 60212:2011
DIN EN 4503:2013-10 Aerospace series - Non-metallic materials - Textiles - Test method - Determination of water soluble chloride and sulfate of aqueous extracts; German and English version EN 4503:2013
DIN EN IEC 61300-3-33:2021 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using pin gauges (IEC 86B/4365/CD:2020); Text in English
DIN EN ISO 105-B04:2023 Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (ISO/DIS 105-B04:2023); German and English version prEN ISO 105-B04:2023
DIN ISO 3402:2023 Tobacco and tobacco products - Atmosphere for conditioning and testing (ISO 3402:2023); Text in German and English
DIN ISO 9462:2023 Alpine ski-bindings - Requirements and test methods (ISO 9462:2023); Text in German and English
DIN EN 12945:2009 Liming materials - Determination of neutralizing value - Titrimetric methods(includes Corrigendum AC:2009); English version of DIN EN 12945:2009-09
DIN SPEC 91143-2:2012-09 Modern rheological test methods - Part 2: Thixotropy - Determination of the time-dependent structural change - Fundamentals and interlaboratory test; Text in German and English
DIN EN 6037:2016-02 Aerospace series - Fibre reinforced plastics - Test method - Determination of bearing strength; German and English version EN 6037:2015
DIN EN 3745-501:2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 501: Optical fibre proof test; German and English version EN 3745-501:2005
DIN EN IEC 63203-402-3:2023-02 Wearable electronic devices and technologies - Part 402-3: Performance measurement method of wearables - Series 2: Accuracy of Heart Rate Determination (IEC 124/167/CD:2021); Text in German and English / Note: Date of issue 2023-01-27
DIN EN 63154:2018 Maritime navigation and radiocommunication equipment and systems - Cybersecurity - General requirements, methods of testing and required test results (IEC 80/883/CD:2018); Text in English
DIN EN ISO 12224-1:2023-09 Solder wire, solid and flux cored - Specification and test methods - Part 1: Classification and performance requirements (ISO/DIS 12224-1:2023); German and English version prEN ISO 12224-1:2023 / Note: Date of issue 2023-07-28*Intended as replacement f...
DIN 58940-7:2009 Medical microbiology - Susceptibility testing of microbial pathogens to antimicrobial agents - Part 7: Determination of the minimum bactericidal concentration (MBC) with the method of microbouillondilution; Text in German and English
DIN EN 300253:2015 Environmental Engineering (EE) - Earthing and bonding of ICT equipment powered by -48 VDC in telecom and data centres (Endorsement of the English version EN 300 253 V2.2.1 (2015-06) as German standard)
DIN 8076:2013 Pressure pipelines made from thermoplastics materials - Metal and plastics compression fittings for polyethylene (PE) pipes - General quality requirements and testing; Text in German and English
DIN EN 2824:2012 Aerospace series - Burning behaviour of non-metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials - Test equipment apparatus and media; German and English version
DIN EN 3745-406:2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test; German and English version EN 3745-406:2005
DIN EN 60068-3-8:2004-09 Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests (IEC 60068-3-8:2003); German version EN 60068-3-8:2003
DIN EN 3745-404:2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock; German and English version EN 3745-404:2005
DIN EN ISO 105-C12:2023 Textiles - Tests for colour fastness - Part C12: Colour fastness to industrial laundering (ISO/DIS 105-C12:2023); German and English version prEN ISO 105-C12:2023
DIN EN 16602-70-15:2018 Space product assurance - Non-destructive testing or non-destructive inspection; English version prEN 16602-70-15:2018
DIN 13200-1:2015 Voice prostheses - Part 1: Test methods for the evaluation of physical characteristics; Text in German and English
DIN EN 13755 Corrigendum 1:2004 Natural stone test methods - Determination of water absorption at atmospheric pressure Corrigendum 1 to English version of DIN EN 13755:2002-03
DIN ISO 18516:2020 Surface chemical analysis - Determination of lateral resolution and sharpness in beam based methods with a range from nanometers to micrometers (ISO 18516:2019); Text in English
DIN EN 3475-812:2010 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 812: Return loss (VSWR); German and English version EN 3475-812:2009
DIN EN 4504:2013 Aerospace series - Non-metallic materials, Textiles - Test method - Determination of flexibility of narrow fabrics; German and English version EN 4504:2013
DIN EN 3475-809:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 809: Resistance unbalance; German and English version EN 3475-809:2009
DIN EN 3745-412:2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance; German and English version EN 3745-412:2005
DIN EN 4505:2013 Aerospace series - Non-metalic materials - Textiles - Test method - Determination of dimensional stability; German and English version EN 4505:2013
DIN EN 3475-811:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 811: Unbalance attenuation; German and English version EN 3475-811:2009
DIN EN 6038:2016-02 Aerospace series - Fibre reinforced plastics - Test method - Determination of the compression strength after impact; German and English version EN 6038:2015
DIN EN 3475-802:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802: Capacitance unbalance; German and English version EN 3475-802:2009
DIN EN 2899:2018 Aerospace series - Vulcanized rubbers - Test on the susceptibility to corrosion in a damp atmosphere of metals in contact with vulcanized rubbers; German and English version EN 2899:2018
DIN EN ISO 22476-12:2009 Geotechnical investigation and testing - Field testing - Part 12: Mechanical cone penetration test (CPTM) (ISO 22476-12:2009); English version of DIN EN ISO 22476-12:2009-10
PAS 1075-2009 Pipes made from Polyethylene for alternative installation techniques-Dimensions,technical requirements and testing English translation included
DIN EN 1380:2009 Timber structures - Test methods - Load bearing nails, screws, dowels and bolts; English version of DIN EN 1380:2009-07
DIN EN 17446:2021 Fire extinguishing systems in commercial kitchens - System design, documentation, and test requirements; German version EN 17446:2021
DIN EN 3873:2011 Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces; German and English version EN 3873:2010
DIN EN 2591-415:2002 Aerospace series - Elements of electrical and optical connections; Test methods - Part 415: Test probe damage (female contacts); German and English version EN 2591-415:2001
DIN EN 15766:2009 Packaging - Flexible aluminium tubes - Test methods to determine the polymerization of the internal coating with acetone; English version of DIN EN 15766:2009-08
DIN EN ISO 6259-1:2015 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015); German and English version EN ISO 6259-1:2015
DIN EN 4507:2013 Aerospace series - Non-metallic materials - Textiles - Test method - Determination of water extractable matter; German and English version EN 4507:2013
DIN EN 3475-810:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 810: Structural return loss; German and English version EN 3475-810:2009
DIN EN ISO 3262-12:2023 Extenders - Specifications and methods of test - Part 12: Muscovite-type mica (ISO/DIS 3262-12:2023); German and English version prEN ISO 3262-12:2023
DIN EN ISO 15194:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation (ISO 15194:2009); English version of DIN EN ISO 15194:2009-10
DIN ETS 300588:1995 European digital cellular telecommunications system (Phase 2) - Base Station System-Mobile-services Switching Centre (BSS-MSC); interface, layer 1 specification; English version ETS 300588:1994
DIN EN ISO 24459:2023-09 Determination of uranium content in samples coming from the nuclear fuel cycle by L-absorption edge spectrometry (ISO 24459:2021); English version EN ISO 24459:2023
DIN EN 16602-70-06:2015 Space product assurance - Particle and UV radiation testing for space materials; English version EN 16602-70-06:2014
DIN EN 13445-5 Corrigendum 1:2003 Unfired pressure vessels - Part 5: Inspection and testing Corrigendum 1 to English version of DIN EN 13445-5:2002-08
DIN EN 16602-70-53:2015 Space product assurance - Materials and hardware compatibility tests for sterilization processes; English version EN 16602-70-53:2015
DIN EN ISO 13679:2019 Petroleum and natural gas industries - Procedures for testing casing and tubing connections (ISO 13679:2019); English version EN ISO 13679:2019
DIN EN ISO 3262-14:2023-10 Extenders - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2023); German version EN ISO 3262-14:2023
DIN SPEC 4885:2014 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus; Text in German and English
DIN EN ISO 3262-22:2023 Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO/DIS 3262-22:2023); German and English version prEN ISO 3262-22:2023
DIN EN 3745-306:2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling; German and English version EN 3745-306:2005
DIN EN 3475-606:2023 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 606: Wicking Test on Textile Braid Insulation; English version prEN 3475-606:2023
DIN EN ISO 16784-2:2023-10 Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig (ISO/DIS 16784-2:2023); German and English version prE...
DIN EN ISO 11073-10103:2014 Health informatics - Point-of-care medical device communication - Part 10103: Nomenclature - Implantable device, cardiac (ISO/IEEE 11073-10103:2014); English version EN ISO 11073-10103:2013
DIN EN ISO 11073-10102:2014 Health informatics - Point-of-care medical device communication - Part 10102: Nomenclature - Annotated ECG (ISO/IEEE 11073-10102:2014); English version EN ISO 11073-10102:2014
DIN EN 409:2009 Timber structures - Test methods - Determination of the yield moment of dowel type fasteners; English version of DIN EN 409:2009-08
DIN EN 3475-806:2023 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 806: Attenuation; English version prEN 3475-806:2023
DIN EN 3866:2014 Aerospace series - Non-metallic materials - Glass tranparencies - Test methods - Determination of ream and surface ripple; German and English version EN 3866:2013
DIN EN 6035:2016-02 Aerospace series - Fibre reinforced plastics - Test method - Determination of notched and unnotched tensile strength; German and English version EN 6035:2015
DIN EN ISO 3449:2009 Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005); English version of DIN EN ISO 3449:2009-07
DIN EN 2826:2011 Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of gas components in the smoke; German and English version EN 2826:2011
DIN EN ISO 16407-1:2018 Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-1 - Part 1: Test suite structure and test purposes (ISO 16407-1:2017); English version EN ISO 16407-1:2017
DIN EN ISO 16410-1:2018 Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-3 - Part 1: Test suite structure and test purposes (ISO 16410-1:2017); English version EN ISO 16410-1:2017
DIN 58921:2011 Test method to demonstrate the suitability of a medical device simulator during steam sterilisation - Medical device simulator testing; Text in German and English
DIN EN 4426:2020-05 Aerospace series - Non-metallic materials - Textiles - Test method - Determination of conductivity and pH of aqueous extracts; German and English version EN 4426:2020
DIN EN ISO 14880-2:2023 Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations (ISO/DIS 14880-2:2023); German and English version prEN ISO 14880-2:2023
DIN EN ISO 14880-4:2023 Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO/DIS 14880-4:2023); German and English version prEN ISO 14880-4:2023
DIN EN 61850-10:2014 Communication networks and systems for power utility automation - Part 10: Conformance testing (IEC 61850-10:2012); English version EN 61850-10:2013
DIN EN 16603-35-10:2014 Space engineering - Compatibility testing for liquid propulsion components, subsystems and systems; English version EN 16603-35-10:2014
DIN EN ISO 8936:2009 Awnings for leisure accommodation vehicles - Requirements and test methods (ISO 8936:2007); English version of DIN EN ISO 8936:2009-07
DIN EN 3475-408:2023 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance; English version prEN 3475-408:2023

PL-PKN, Test Center English

PN M53421-1961 Measuring Instruments Bench Testing Centres
PN M55651-1967 Metal cutting machinetools Centr? lathes with swing over ted op to 315 mm Accuracy testing

国家铁路局, Test Center English

TB/T 3536-2018 Train control center test specifications
TB/T 3535-2018 Radio Block Center Test Specification

ZA-SANS, Test Center English

ARP 065-2007 Test and fitment centres for airbags

GM Global, Test Center English

GMW 3286-2011 Neutral Salt Spray (NSS) Test English; Issue 2
GMW 16982-2013 Cold Slam Test Issue 1; English [Replaced: GMNA GM9773P, GMNA GM9773P]
GMW 3191-2012 Connector Test and Validation Specification Issue 2; English [Replaced: GME QT 126595, GME QT 126595]
GMW 16926-2013 Molding and Emblem Adhesion Test Pluck Resistance Issue 1; English [Replaced: GMNA GM9774P, GMNA GM9774P]
GMW 16966-2013 Procedure for Crowbar Testing Structurally Bonded Plastic Assemblies Issue 1; English [Replaced: GMNA GM9647P, GMNA GM9647P]
GMW 3232-2011 Test Method for Determining the Flammability of Interior Trim Materials Issue 4; English [Replaced: GMW GMW3232]
GMW 14278-2011 Static and Dynamic Test of Cover Spare Wheel/Tool Compartment and Shelves in the Vehicle Load Compartment Issue 2; English

GM Daewoo, Test Center English

GMKOREA EDS-T-7970-2015
GMKOREA EDS-T-7914-2015
GMKOREA EDS-T-7917-2015
GMKOREA EDS-T-7909-2015
GMKOREA EDS-T-2258-2015
GMKOREA EDS-T-7907-2015
GMKOREA EDS-T-2254-2015
GMKOREA EDS-T-7721-2011 Test Standard Test Method for Determining Carbon Residue of Petroleum Product (Version 4; English/Korean; Do Not Use on New Program; No Replacement.)
GMKOREA EDS-T-7902-2011 Test Method for Non Structure Adhesives (VERSION 4; English/Korean; Do Not Use on New Program; No Replacement)
GMKOREA EDS-T-7710-2011 Test Method for Determining Content of Non-Soluble Residue in Used Lubricant Oil (Version 4; English/Korean; Do Not Use on New Program; No Replacement)
GMKOREA EDS-T-7709-2011 Test Method for the Fluidity of Sealant (Version 4; English/Korean; Do Not Use on New Program; No Replacement)
GMKOREA EDS-T-7716-2011 Test Method for Aniline Point of Petroleum Products (Version 4; English/Korean; Do Not Use on New Program; No Replacement.)
GMKOREA EDS-T-7731-2011 Standard for the Test Method for the Hardness of Industrial Water (Version 3; English/Korean; Do Not Use on New Program; No Replacement)
GMKOREA EDS-T-7708-2011 Standard Test Method for Distillation of Petroleum Products (Version 4; English/Korean; Do Not Use on New Program; No Replacement.)
GMKOREA EDS-T-7756-2011 Test Method for Determining the Resistance to Abrasion of Organic Coatings (VERSION: 3; English/Korean; Do Not Use on New Program; No Replacement)

CZ-CSN, Test Center English

CSN 66 8102 Cast.26-1997
CSN 01 5252-1988 Mutually delivered products quality as-sessment and certiíication systém Documcnt on the results of testing labora-tory (center) assessment and testimony on testing laboratory (center) accreditation The lay-out of forms and the way of filling in
CSN 20 0300 Cast.24-1986 Measurements of geometrical accuracy of machine tools. Measuring methods for axial run-out of test part surfaces

Professional Standard - Radio Television Film, Test Center English

GY/T 115-1995 Test Page of Chinese Character System Teletext

Group Standards of the People's Republic of China, Test Center English

T/GJSH 000009-2020 Inspection and Acceptance Test for Cross-belt Sorter（Chinese/English Bilingual Version）
T/UAV 8-2021 Chinese-English bilingual terms commonly used in aerial photography surveying and mapping
T/CCSA 267-2019 Test specification for micro modular data center
T/CCSA 266-2019 Test specification for SSD of data centers
T/CCSA 326-2021 Test method of general server in data center
T/CCSA 265-2019 Test specification for HDD of data centers
T/SHSIC 0101-2023
T/CCSA 268-2019 Power usage effectiveness ( PUE ) test specification for micromodel data center
T/DZJN 43-2021 Calculation of energy efficiency ratings and test methods for data centers
T/AI 118.2-2022 Artificial intelligence computing centre Part 2：Test approaches
T/CCSA 244-2019 SDN Test Standard for Technical Competency of Banking Datacenter Cloud
T/CCSA 327-2021 Technical requirements and test methods of carbon usage effectiveness for data center
T/CCSA 430-2023 Test and evaluation method for seismic performance of data center server
T/CCSA 429-2023 Technology requirements of test and evaluation method for seismic performance of data center switch
T/CCSA 331-2021 Modularization technical requirements and testing method of internet edge data center
T/CCSA 264-2019 Technical requirements and test methods for typical scenes of data center lossless network
T/CCSA 274-2019 Technical requirements and test methods for cooling liquids of data center liquid cooling systems
T/CCSA 431-2023 Test and evaluation method for seismic performance of data center server cabinet
T/CCSA 427-2023 Server technical requirements and test methods for internet edge data center
T/CCSA 330-2021 Technical requirements and testing methods for infrastructure for internet edge data center
T/CCSA 269-2019 General technical requirements and test methods for liquid cooling server system of data center
T/CCSA 271-2019 Technical requirements and test methods for spray liquid cooling server system of data center
T/CCSA 272-2019 Technical requirements and test methods for immersion liquid cooling server system of data center
T/CCSA 270-2019 Technical requirements and test methods for cold plate liquid cooling server system of data center
T/CCSA 273-2019 Technical requirements and test methods for power usage efficiency of liquid cooling server system of data center

Korean Agency for Technology and Standards (KATS), Test Center English

KS B 4404-2003 TEST CODE FOR PERFORMANCE AND ACCURACY OF MACHINING CENTERS
KS B 4404-2008 TEST CODE FOR PERFORMANCE AND ACCURACY OF MACHINING CENTERS
KS T 1333-2012 Packaging－Complete, filled transport packages－Test methods for the determination of the center of gravity of a package
KS B 4408-2012 test code for performance and accuracy of machining centers (vertical type)
KS T 1333-2020 Packaging — Complete, filled transport packages — Test methods for the determination of the center of gravity of a package
KS B ISO 13041-6:2018 Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece
KS B 4421-2002 Test code for performance and accuracy of machining centersX axis column traveling type
KS M 2115-2017(2022) Testing method for water and sediment in distillate fuel by centrifuge
KS R ISO 13674-1:2005 Road vehicles-Test method for the quantification of on-centre handling-Part 1:Weave test
KS R ISO 13674-1:2015 Road vehicles-Test method for the quantification of on-centre handling-Part 1:Weave test
KS B ISO 13041-2:2018 Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle
KS B ISO 13041-3:2018 Test conditions for numerically controlled turning machines and turning centres — Part 3: Geometric tests for machines with inverted vertical workholding spindles
KS F 2407-1968(1995) TESTING METHOD FOR FLEXURAL STRENGTH OF CONCRETE (USING SIMPLE BEAM WITH CENTER-POINT LOADING)
KS B ISO 13041-8:2018 Test conditions for numerically controlled turning machines and turning centres — Part 8: Evaluation of thermal distortions
KS R ISO 20119:2005 Road vehicles-Test method for the quantification of on-centrehandling-Determination of dispersion metrics for straight-line driving
KS R ISO 20119:2013 Road vehicles－Test method for the quantification of on-centrehandling－Determination of dispersion metrics for straight-line driving

工业和信息化部, Test Center English

YD/T 3984-2021 Micro Modular Data Center Test Specification
YD/T 3885-2021 Data center switch equipment VxLAN testing method
YD/T 4023-2022 Micro module data center energy efficiency (PUE) test specifications
YD/T 3399-2018 Telecom Internet Data Center (IDC) Network Equipment Testing Method
YD/T 3902-2021 Technical requirements and testing methods for typical scenarios of data center lossless networks
YD/T 3982-2021 Data center liquid cooling system cooling liquid technical requirements and test methods
YD/T 4071-2022 Internet edge data center virtualization technology requirements and testing methods
YD/T 4024-2022 Overall technical requirements and testing methods for data center liquid-cooled server systems
YD/T 4028-2022 Data center high-speed Ethernet lossless network testing method based on RoCE protocol
YD/T 3979-2021 Technical requirements and test methods for immersed liquid-cooled server systems in data centers
YD/T 3981-2021 Technical requirements and test methods for spray liquid-cooled server systems in data centers
YD/T 3980-2021 Technical requirements and test methods for data center cold plate liquid-cooled server systems
YD/T 3970-2021 IPv4-IPv6 service interoperability switching center network element testing method based on cloud computing technology
YD/T 3983-2021 Technical requirements and testing methods for energy efficiency of data center liquid-cooled server systems
YD/T 4026-2022 Data center network technical requirements and testing methods based on remote direct memory access
YD/T 3972-2021 Test method for basic cloud platform of IPv4-IPv6 business interoperability exchange center based on cloud computing technology
YD/T 4068-2022 IPv4-IPv6 business interworking exchange center security system testing method based on cloud computing technology

CEN - European Committee for Standardization, Test Center English

EN 17125:2018 Domestic spas/whirlpool spas/hot tubs - Safety requirements and test methods

Association Francaise de Normalisation, Test Center English

NF P90-329*NF EN 17125:2018 Domestic spas/whirpool spas/hot tubs - Safety requirements and test methods
NF E60-172-7*NF ISO 10791-7:2020 Test conditions for machining centres - Part 7 : accuracy of finished test pieces
NF G52-014:1976 DETERMINATION OF RESISTANCE OF LEATHER TO TEARING (ON SPECIMEN HAVING A SLIT IN THE CENTRE).
NF ISO 10791-6:2015 Conditions d'essai pour centres d'usinage - Partie 6 : précision des vitesses et interpolations
NF EN 17125:2018 Spas domestique et les spas - Les exigences de sécurité et méthodes d'essai
NF EN 16602-20-07:2017 Assurance produit des projets spatiaux - Assurance de la qualité et de la sécurité pour les centres de test
NF EN 12372:2022 Méthodes d'essai pour pierres naturelles - Détermination de la résistance à la flexion sous charge centrée
NF ISO 13041-6:2009 Conditions d'essai des tours à commande numérique et des centres de tournage - Partie 6 : exactitude d'une pièce d'essai usinée
NF E60-172-1*NF ISO 10791-1:2016 Test conditions for machining centres - Part 1 : geometric tests for machines with horizontal spindle (horizontal Z-axis)
NF ISO 13041-8:2004 Conditions d'essai des tours à commande numérique et des centres de tournage - Partie 8 : évaluation des effets thermiques
NF E60-160-5*NF ISO 13041-5:2015 Test conditions for numerically controlled turning machines and turning centres - Part 5 : accuracy of speeds and interpolations
NF EN IEC 60068-3-7:2020 Essais d'environnement - Partie 3-7 : documentation d'accompagnement et recommandations - Mesurages dans les chambres d'essai en température pour les essais A (froid) et B (chaleur sèche) (avec charge)
NF S62-446*NF EN 17446:2021 Fire extinguishing systems in commercial kitchens - System design, documentation, and test requirements
NF P98-863-3*NF EN 13863-3:2005 Concrete pavements - Part 3 : test methods for the determination of the thickness of a concrete pavement from cores
NF E60-160-2*NF ISO 13041-2:2020 Test conditions for numerically controlled turning machines and turning centres - Part 2 : geometric tests for machines with a vertical workholding spindle
NF E60-160-1*NF ISO 13041-1:2020 Test conditions for numerically controlled turning machines and turning centres - Part 1 : geometric tests for machines with horizontal workholding spindle(s)

British Standards Institution (BSI), Test Center English

BS EN 17125:2018 Domestic spas/whirlpool spas/hot tubs. Safety requirements and test methods
BS ISO 13674-2:2016 Tracked Changes. Road vehicles. Test method for the quantification of on-centre handling. Transition test
BS ISO 18322:2017 Space systems. General management requirements for space test centres
BS ISO 10791-10:2022 Tracked Changes. Test conditions for machining centres. Evaluation of thermal distortions
BS ISO 13674-1:2010 Road vehicles - Test method for the quantification of on-centre handling - Weave test
18/30361451 DC BS ISO 10791-7. Test conditions for machining centres. Part 7. Accuracy of finished test piece
23/30440153 DC BS ISO 13674-1. Road vehicles. Test method for the quantification of on- centre handling - Part 1. Weave test
17/30360078 DC BS EN 12504-1. Testing concrete in structures. Part 1. Cored specimens. Taking, examining and testing in compression
BS ISO 10791-2:2023 Tracked Changes. Test conditions for machining centres. Geometric tests for machines with vertical spindle (vertical Z-axis)
16/30327831 DC BS ISO 10791-7 AMD1. Test conditions for machining centres. Part 7. Accuracy of finished test pieces
BS EN 13863-3:2005 Concrete pavements - Test methods for the determination of the thickness of a concrete pavement from cores
21/30400886 DC BS ISO 10791-10. Test conditions for machining centres. Part 10. Evaluation of thermal distortions
BS EN 13863-3:2004 Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores
21/30421388 DC BS ISO 10791-2. Test conditions for machining centres. Part 2. Geometric tests for machines with vertical spindle (vertical Z-axis)
BS EN IEC 60068-3-7:2020 Environmental testing - Supporting documentation and guidance. Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)
BS ISO 9608:2022 V-belts and V-ribbed belts. Uniformity of belts. Test method for determination of centre distance variation
BS ISO 10791-3:1998 Test conditions for machining centres. Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)

ES-UNE, Test Center English

UNE-EN 17125:2021 Domestic spas/whirlpool spas/hot tubs - Safety requirements and test methods
UNE-EN 16602-20-07:2016 Space product assurance - Quality and safety assurance for space test centres (Endorsed by AENOR in October of 2016.)
UNE-ISO 13041-1:2022 Test conditions for numerically controlled turning machines and turning centres -- Part 1: Geometric tests for machines with horizontal workholding spindle(s)

IN-BIS, Test Center English

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Test Center English

GB 50579-2010 Code of design for physical and chemical testing center of aviation industry
GB/T 13490-2006 V-belts. Uniformity of belts. Test method for determination of centre distance variation
GB/T 26856-2011 Specification for the basic requirements and conformity test of Chinese office software

NZ-SNZ, Test Center English

NZS 4402.3.4:1986 Methods of Testing Soils for Civil Engineering Purposes Part 3: Soil Chemical Tests Test 3.4: Detection of Presence of Allophane in Soils

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Test Center English

ASHRAE 164.1-2008 Method of Test for Residential Central-System Humidfiers

Danish Standards Foundation, Test Center English

DS/EN 14736:2004 Space product assurance - Quality assurance for test centres
DS/EN 60068-3-8:2004 Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests

Lithuanian Standards Office , Test Center English

LST EN 14736-2004 Space product assurance - Quality assurance for test centres
LST EN 17446-2021 Fire extinguishing systems in commercial kitchens - System design, documentation, and test requirements
LST EN 60068-3-8-2004 Environmental testing. Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests (IEC 60068-3-8:2003)

US-FCR, Test Center English

FCR AF AFI AFMC 21-119-2000 OBJECTIVE CENTER/TEST WING AIRCRAFT MAINTENANCE MANAGEMENT POLICY

Institute of Electrical and Electronics Engineers (IEEE), Test Center English

IEEE Std 1450.6.2-2014 IEEE Standard for Memory Modeling in Core Test Language

AT-OVE/ON, Test Center English

OVE EN IEC 60598-1/AA:2021 Luminaires - Part 1: General requirements and tests (Amendment) (english version)
OVE EN 50642/A1-2021 Cable management systems - Test method for content of halogens (english version) (Amendment)
OVE EN IEC 60851-1:2020 Winding wires - Test methods - Part 1: General (IEC 55/1875/CDV) (english version)
OVE EN IEC 63355:2021 Cable management systems - Test method for content of halogens (IEC 23A/974/CDV) (english version)
OVE EN IEC 62093:2021 Power conversion equipment for photovoltaic systems - Design qualification testing (IEC 82/1845/CDV) (english version)
OVE EN 60763-2/A1-2021 Specification for laminated pressboard - Part 2: Methods of test (IEC 15/943/CDV) (Amendment) (english version)
OVE EN 50342-1/A2-2021 Lead-acid starter batteries - Part 1: General requirements and methods of test (Amendment) (english version)
OVE EN IEC 61300-2-5:2021 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion (IEC 86B/4503/CDV) (english version)
OVE EN IEC 60512-99-002:2021 Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load (IEC 48B/2881/CDV) (english version)
OVE EN IEC 61169-1-6:2021 Radio frequency connectors - Part 1-6: Electrical test methods- RF power (IEC 46F/563/CDV) (english version)
OVE EN IEC 60794-1-402:2020 Optical Fibre Cables - Basic optical cable test procedures - Part 402: Electrical test methods - Lightning test (for OPGW, OPPC and OPAC), Method H2 (IEC 86A/2045/CDV) (english version)
OVE EN IEC 60794-1-401:2020 Optical fibre cables - Basic optical cable test procedures - Part 401: Electrical test methods - Short-circuit test (for OPGW, OPPC and OPAC), Method H1 (IEC 86A/2044/CDV) (english version)
OVE EN IEC 60794-1-404:2021 Optical fibre cables - Part 1-404: Generic specification - Basic optical cable test procedures - Electrical test methods - Current-temperature test, Method H4 (IEC 86A/2100/CDV) (english version)
OVE EN IEC 60794-1-219:2020 Optical fibre cables - Part 1-219: Generic specification - Basic optical cable test procedures - Material compatibility test, Method F19 (IEC 86A/2043/CDV) (english version)
OVE EN IEC 61169-1-5:2021 Radio frequency connectors - Part 1-5: Electrical test methods - Rise time degradation (IEC 46F/562/CDV) (english version)
OVE EN IEC 62788-5-1/A1:2021 Measurement procedures for materials used in photovoltaic modules - Part 5-1: Edge seals - Suggested test methods for use with edge seal materials (IEC 82/1847/CDV) (Amendment) (english version)
OVE EN IEC 60749-37:2020 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 47/2651/CDV) (english version)
OVE EN IEC 61300-2-43:2021 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-43: Tests - Screen testing of return loss of single-mode PC optical fibre connectors (IEC 86B/4495/CDV) (english version)
OVE EN IEC 62150-6:2021 Fibre optic active components and devices - Basic test and measurement procedures - Part 6: Universal mezzanine boards for test and measurement of photonic devices (IEC 86C/1721/CDV) (english version)
OVE EN IEC 63373:2021 Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices (IEC 47/2690/CDV) (english version)
OVE EN IEC 60749-39:2020 Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components (IEC 47/2652/CDV) (english version)
OVE EN IEC 62321-10:2020 Determination of certain substances in electrotechnical products - Part 10: Polycyclic aromatic hydrocarbons PAHs in polymers and electronics by gas chromatography-mass spectrometry GC-MS IEC 111/575F english version

American Society for Testing and Materials (ASTM), Test Center English

ASTM C678-75(1991)e1 Test Method for Determination of Particle Size Distribution of Alumina or Quartz Using Centrifugal Sedimentation
ASTM F1991-99 Standard Test Method for Performance of Chinese (Wok) Ranges
ASTM D2709-96(2006) Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D2709-22 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D4007-11 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-11e1 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D2709-16 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D1585-96(2006) Standard Test Methods for Fatty Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products
ASTM D1585-96 Standard Test Methods for Fatty Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products
ASTM D1290-95 Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
ASTM D1290-95(2002) Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
ASTM D5546-94a Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
ASTM D5546-01 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
ASTM D1290-95(2008) Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
ASTM D5546-09 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
ASTM F2398-04 Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
ASTM F2398-04e1 Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
ASTM C293-94 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C293-02 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM D6374-99(2004) Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure
ASTM F2398-11(2020) Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
ASTM D4007-81(1995)e1 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-02 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-02(2006) Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-08 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM F2398-11 Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
ASTM F2398-11(2015) Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
ASTM D4007-22 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-22 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-11(2016)e1 Standard test method for determination of water and sediment in crude oil by centrifugation (laboratory method)
ASTM D1796-04 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-97 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-97e1 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-83(1990)e1 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-97(2002) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM C1667-09 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
ASTM F2398-10 Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
ASTM D1796-11 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM C1667-07 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
ASTM C1667-15 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels

SE-SIS, Test Center English

SIS SS-ISO 5748:1991 Pliers and nippers — End cutting nippers — Dimensions and test values

RU-GOST R, Test Center English

GOST R 50289-1992 Hollow insulators for use in electrical equipment. Test methods
GOST ISO 13041-5-2016 The lathes with numerical control and CNC machining centers. Test conditions. Part 5. Accuracy speeds and interpolations

International Organization for Standardization (ISO), Test Center English

ISO 9608:1994 V-belts - Uniformity of belts - Test method for determination of centre distance variation
ISO 13674-1:2010 Road vehicles - Test method for the quantification of on-centre handling - Part 1: Weave test
ISO 13041-2:2020 Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle
ISO 9608:1988 V-belts; uniformity of belts; centre distance variation; specifications and test method
ISO 9608:2022 V-belts and V-ribbed belts — Uniformity of belts — Test method for determination of centre distance variation
ISO/TS 20119:2002 Road vehicles - Test methods for the quantification of on-centre handling - Determination of dispersion metrics for straight-line driving

Malaysia Standards, Test Center English

MS 961-1985

Association of German Mechanical Engineers, Test Center English

Professional Standard - Post and Telecommunication, Test Center English

YD/T 4414-2023
YD/T 2659-2013 National Communication Network Interoperability Monitoring Center Internet Monitoring System Test Method
YD/T 1407-2005 Technical specification and test method for interconnecting communication quality of internet exchange (NAP)
YD/T 1397-2005 900/1800 MHz TDMA digital cellular mobile communication network test methods for LCS service equipment: SMLC and GMLC
YD/T 1248.4-2005 Part Ⅳ:Test methods of short message centre based on PSTN
YD/T 1500-2006 Testing Methods of Multimedia Messaging Service Center in Digital Cellular Mobile Telecommunication Network
YD/T 1639-2007 Security Specification and Testing Methods for the Short Message Centre Equipments and Short Message Gateway Equipments

民政部, Test Center English

MZ/T 081-2017 China Welfare Lottery System Document Testing Specifications

International Telecommunication Union (ITU), Test Center English

ITU-T M.734-1988 Exchange of information on incoming test facilities at international switching centres
ITU-T R.79-1989 Automatic Tests of Transmission Quality on Telegraph Circuits between Switching Centres - Telegraph Transmission Study Group IX; 8 pp
ITU-T M.734 FRENCH-1988 Exchange of information on incoming test facilities at international switching centres
ITU-T M.734 SPANISH-1988 Exchange of information on incoming test facilities at international switching centres
ITU-T R.79 FRENCH-1988 AUTOMATIC TESTS OF TRANSMISSION QUALITY ON TELEGRAPH CIRCUITS BETWEEN SWITCHING CENTRES
ITU-T R.79 SPANISH-1988 AUTOMATIC TESTS OF TRANSMISSION QUALITY ON TELEGRAPH CIRCUITS BETWEEN SWITCHING CENTRES

KR-KS, Test Center English

KS B ISO 10791-10-2016 Test conditions for machining centres — Part 10: Evaluation of thermal distortions
KS B ISO 13041-6-2018 Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece
KS B ISO 10791-8-2016 Test conditions for machining centres — Part 8: Evaluation of contouring performance in the three coordinate planes
KS B ISO 13041-2-2018 Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle
KS B ISO 13041-1-2016 Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with a horizontal workholding spindle
KS B ISO 13041-3-2018 Test conditions for numerically controlled turning machines and turning centres — Part 3: Geometric tests for machines with inverted vertical workholding spindles
KS B ISO 10791-6-2016 Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations
KS B ISO 13041-8-2018 Test conditions for numerically controlled turning machines and turning centres — Part 8: Evaluation of thermal distortions
KS B ISO 10791-5-2016 Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets
KS B ISO 10791-1-2016 Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle and with accessory heads(horizontal Z-axis)

未注明发布机构, Test Center English

BS 5507-1:1977(2010) Methods of test for Falsework equipment — Part 1 : Floor centres
DIN EN 12504-1:2019 Testing of concrete in structures – Part 1: Core samples – Production, examination and testing of compressive strength
VDI VDE 2602 Blatt 3-2018 Surface testing, specification of surface conditions in technical product documentation, Surface measurement, Specification of surface conditions in technical product documentation
VDI VDE 2602 Blatt 3-2012 Surface testing Specification of surface conditions in technical product documentation Surface measurement Specification of surface conditions in technical product documentation

Standard Association of Australia （SAA）, Test Center English

AS/NZS 4347.2:1995 Damp-proof courses and flashings - Methods of test - Determination of continuity of coating on metal centres
AS/NZS 4347.3:1995 Damp-proof courses and flashings - Methods of test - Determination of pliability of bitumen coating on metal centres
AS/NZS 4347.7:1995 Damp-proof courses and flashings - Methods of test - Determination of thickness of bitumen coating and thickness or mass of metallic centre

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Test Center English

ITU-T R.79-1988 AUTOMATIC TESTS OF TRANSMISSION QUALITY ON TELEGRAPH CIRCUITS BETWEEN SWITCHING CENTRES

Japanese Industrial Standards Committee (JISC), Test Center English

JIS B 1861:2016 V-belts and V-ribbed belts -- Test method for determination of centre distance variation
JIS C 61280-1-3:2010 Fiber optic communication subsystem test procedures -- Central wavelength and spectral width measurement
JIS B 6331-1:2022 Test conditions for numerically controlled turning machines and turning centres -- Part 1: Geometric tests for machines with horizontal workholding spindle(s)

AENOR, Test Center English

UNE 15450-7:2000 Machine-tools. Test conditions for machining centres. Part 7: Accuracy of a finished test piece.
UNE-EN 60068-3-8:2004 Environmental testing -- Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests
UNE 15450-8:2001 Machine-tools. Test conditions for machining centres. Part 8: Evaluation of the contouring performance in the three coordinate planes.
UNE 15450-6:2000 Machine-tools. Test conditions of machining centres. Part 6: Accuracy of feeds, speeds and interpolations.

European Committee for Standardization (CEN), Test Center English

EN ISO 6468:1996 Water Quality - Determination of Certain Organochlorine Insecticides, Polychlorinated Biphenyls and Chlorobenzenes - Gas Chromatographic Method After Liquid-Liquid Extraction ISO 6468: 1996
EN 2824:2011 Aerospace series - Burning behaviour of non-metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials - Test equipment apparatus and media
EN 17446:2021 Fire extinguishing systems in commercial kitchens - System design, documentation, and test requirements
EN 13863-3:2004 Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores

VE-FONDONORMA, Test Center English

COVENIN 643-1975

GOSTR, Test Center English

GOST ISO 10791-6-2017 Machining centres. Test conditions. Part 6. Accuracy of speeds and interpolations
GOST ISO 13041-1-2017 Numerically controlled turning machines and turning centres. Test conditions. Part 1. Geometric tests for machines with a horizontal work holding spindle

American National Standards Institute （ANSI), Test Center English

BS EN ISO 748:2021 Tracked Changes. Hydrometry. Measurement of liquid flow in open channels. Velocity area methods using point velocity measurements (British Standard)
ANSI/ASTM F2398:2011 Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat

API - American Petroleum Institute, Test Center English

API STD 2548-1968 STANDARD METHOD OF TEST FOR WATER AND SEDIMENT IN CRUDE OILS AND FUEL OILS BY CENTRIFUGE

国家卫生计生委, Test Center English

WS/T 548-2017 Digital Imaging Communications in Medicine (DICOM) Chinese Standard Compliance Test Specification

AASHTO - American Association of State Highway and Transportation Officials, Test Center English

T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
T 177-2003 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)

The American Road & Transportation Builders Association, Test Center English

AASHTO T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)

GB-REG, Test Center English

REG NASA-LLIS-0562-1997 Lessons Learned ?Testing With Removable Shrouds in the LaRC 8-Foot High Temperature Tunnel

CH-SNV, Test Center English

SN EN 17446-2021 Fire extinguishing systems in commercial kitchens - System design, documentation, and test requirements

IT-UNI, Test Center English

UNI EN 17446-2021 Fire extinguishing systems in commercial kitchens - System design, documentation, and test requirements

ETSI - European Telecommunications Standards Institute, Test Center English

TS 186 008-3-2015 Core Network and Interoperability Testing (INT); IMS/NGN Performance and Robustness Benchmarking; Part 3: Traffic Sets and Traffic Profiles (V2.1.1)