ZH
RU
ES

Experimental material Experimental method

Experimental material Experimental method, Total:498 items.

In the international standard classification, Experimental material Experimental method involves: Insulating materials, Corrosion of metals, Road engineering, Protection against fire, Construction materials, Education, Soil quality. Pedology, Products of the chemical industry, Terminology (principles and coordination), Aircraft and space vehicles in general, Analytical chemistry, Pharmaceutics, Quality, Lubricants, industrial oils and related products, Wastes, Environmental testing, Applications of information technology, Manufacturing processes in the rubber and plastics industries, Wood, sawlogs and sawn timber, Wood technology processes, Paints and varnishes, Refractories, Construction equipment, Wood-based panels, Test conditions and procedures in general, Earthworks. Excavations. Foundation construction. Underground works, Special purpose vehicles, Semi-manufactures of timber, Plastics, Photography, Graphic technology, Earth-moving machinery, Materials for aerospace construction, Mechanical testing, Protection of and in buildings, Microbiology, General methods of tests and analysis for food products, Farming and forestry, Civil engineering in general, Fuels, Biology. Botany. Zoology, Medical sciences and health care facilities in general, Gas and steam turbines. Steam engines, Reinforced plastics, Standardization. General rules, Surface treatment and coating, Waxes, bituminous materials and other petroleum products, Buildings, Medical equipment, Air quality, Products of the textile industry, Hydraulic energy engineering, Metalliferous minerals, Coals, Sterilization and disinfection, Road vehicles in general, Inorganic chemicals, Software development and system documentation, Veterinary medicine, Graphical symbols, Non-textile floor coverings, Elements of buildings, Water quality, Shipbuilding and marine structures in general, Agricultural machines, implements and equipment, Tyres, Measurement of volume, mass, density, viscosity, Testing of metals, Nuclear energy engineering.

Indonesia Standards, Experimental material Experimental method

SNI 04-6190.1.2-2001 Common test methods for insulating and sheathing materials of electric cables. Part 1: Methods for general application - Section 2: Thermal ageing methods
SNI 04-6190.3.2-2000 Common test methods for insulating and sheathing materials of electric cables. Part 3: Method specific to PVC compound - Section 2: Lost of mass test - Thermal stability tests
SNI 04-6190.3.1-2001 Common test methods for insulating and sheathing materials of electrical cables - Part 3: Methods specific to PVC compound - Section 1: Pressure test at high temperature - Test for resistance to cracking
SNI 6427-2012 Metode uji basah dan uji kering campuran tanah-semen dipadatkan
SNI 1744-2012 Metode uji CBR laboratorium
SNI 04-6190.4.2-2001 Common test methods for insulating and sheating materials of electrical cables. Part 4: Methods specific to polyethylene and polypropylene compounds - Section 2: Elongation to break after pre-conditioning - Wrapping test after pre-conditioning - Wrappin
SNI 3419-2008
SNI 8059-2014 Standard practice for conducting an interlaboratory test program to determine the precision of test methods for construction materials
SNI 2815-2011 Cara uji tekan triaksial pada batu di laboratorium
SNI 04-6190.1.3-2001 Common test methods for insulating and sheating materilas of electric cables - Part 1: Methods for general applications - Section 3: Methods for determining the density - Water absorption tests - Shrink
SNI 03-3399-1994 Test method for tensile strength of wood in the laboratories
SNI 07-6217-2000 Testing methods of metal laboratory corrosion
SNI 03-6430.1-2000 Test methods for compressive strength of grouts for preplaced-aggregate concrete in the laboratory
SNI 2486-2011 Cara uji kuat tarik tidak langsung batu di laboratorium

German Institute for Standardization, Experimental material Experimental method

DIN EN 12802:2011-12 Road marking materials - Laboratory methods for identification; German version EN 12802:2011 / Note: To be replaced by DIN EN 12802 (2018-12).
DIN EN 12802:2011 Road marking materials - Laboratory methods for identification; German version EN 12802:2011
DIN EN 12697-32:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor (includes Amendment A1:2007); English version of DIN EN 12697-32:2007-11
DIN EN 12697-10:2018 Bituminous mixtures - Test methods - Part 10: Compactability
DIN V 55394-2:2000 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies (ISO/IEC Guide 43-2:1997)
DIN 51935:1993 Testing of carbon materials; determination of the coefficient of permeability by means of the vacuum-decay method with air as experimental gas; solid matters
DIN EN 932-2:1999-03 Test for general properties of aggregates - Part 2: Methods for reducing laboratory samples; German version EN 932-2:1999
DIN 12851:1974 Laboratory porcelain; requirements, methods of test
DIN V 55394-1:2000 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes (ISO/IEC Guide 43-1:1997)
DIN 51916:2013 Testing of carbonaceous materials - Determination of apparent density after tamping - Solid materials
DIN EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods; English version of DIN EN 14727:2006-03
DIN 51935:2019-07 Testing of carbonaceous materials - Determination of the coefficient of permeability by means of the vacuum-decay method with air as experimental gas - Solid materials
DIN EN ISO 10722:2020 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method) (ISO 10722:2019)
DIN EN 13150:2001 Workbenches for laboratories - Safety requirements and test methods; German version EN 13150:2001
DIN CEN/TS 17329-1:2021-09 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation; German version CEN/TS 17329-1:2021
DIN 51916:1987 Testing of carbon materials; determination of apparent density after tamping; solid materials
DIN 51916:2012 Testing of carbonaceous materials - Determination of apparent density after tamping - Solid materials
DIN 51916:2013-12 Testing of carbonaceous materials - Determination of apparent density after tamping - Solid materials
DIN EN ISO 4892-2:2021-11 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013 + Amd 1:2021); German version EN ISO 4892-2:2013 + A1:2021

Professional Standard - Machinery, Experimental material Experimental method

JB/T 7901-1999 Metals materials - Uniform corrosion - Methods of laboratory immersion testing

British Standards Institution (BSI), Experimental material Experimental method

BS EN 12802:2011 Road marking materials. Laboratory methods for identification
18/30382612 DC BS EN 12802. Road marking materials. Laboratory methods for identification
BS EN 993-3:1997 Methods of test for dense shaped refractory products - Test methods for carbon-containing refractories
BS DD CEN/TS 13354:2003 Solid wood panels - Bonding quality - Test method
DD CEN/TS 13354:2003 Solid wood panels. Bonding quality. Test method
BS 6401:1983 Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials
BS EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
BS EN 14727:2006 Laboratory furniture. Storage units for laboratories. Requirements and test methods
BS EN ISO 4892-2:2013 Plastics. Methods of exposure to laboratory light sources. Xenon-arc lamps
BS EN 13354:2008 Solid wood panels (SWP) - Bonding quality - Test method
BS EN 13354:2009 Solid wood panels (SWP) - Bonding quality - Test method
BS PD CEN/TS 17329-1:2021 Foodstuffs. General guidelines for the validation of qualitative real-time PCR methods. Single-laboratory validation
BS EN 12697-32:2003 Bituminous mixtures — Test methods for hot mix asphalt — Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
BS DD CEN/TS 15443:2006 Solid recovered fuels — Methods for laboratory sample preparation
BS DD CEN/TS 15443:2007 Solid recovered fuels. Methods for laboratory sample preparation
BS ISO 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
BS EN 15443:2011 Solid recovered fuels. Methods for the preparation of the laboratory sample
BS EN ISO 4892-2:2013+A1:2021 Plastics. Methods of exposure to laboratory light sources - Xenon-arc lamps
BS 7755-5.5:1999 Soil quality - Physical methods - Laboratory methods
BS ISO 12828-2:2016 Validation methods for fire gas analyses. Intralaboratory validation of quantification methods
BS EN ISO 3696:1987 Water for analytical laboratory use - Specification and test methods
BS EN ISO/IEC 15423:2010 Water for analytical laboratory use - Specification and test methods
BS ISO 3086:2006 Iron ores - Experimental methods for checking the bias of sampling
BS EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods
BS 3517:1991 Methods for thermal shock tests on laboratory glassware
BS EN 12697-10:2001 Bituminous mixtures — Test methods for hot mix asphalt — Part 10: Compactibility
BS EN 12697-10:2002 Bituminous mixtures - Test methods for hot mix asphalt - Compactibility
BS EN 15413:2011 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
BS 7530-1:1992 Methods for froth flotation testing of hard coal - Laboratory procedure
BS EN 13286-2:2010 Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
BS EN 13286-2:2010(2012) Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
BS EN 13286-2:2004 Unbound and hydraulically bound mixtures - Test methods for the determination of the laboratory reference density and water content - Proctor compaction
BS ISO 11561:1999 Ageing of thermal insulation materials - Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
BS EN ISO 4892-3:2013 Plastics. Methods of exposure to laboratory light sources. Fluorescent UV lamps

European Committee for Standardization (CEN), Experimental material Experimental method

EN 12802:2000 Road Marking Materials - Laboratory Methods for Identification
EN 12802:2011 Road marking materials - Laboratory methods for identification
EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
PD CEN/TS 13354:2003 Solid wood panels - Bonding quality - Test method
CEN PREN 14727-2003 Laboratory furniture - Storage units for laboratories - Requirements and test methods
EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
EN 12697-43:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel
EN ISO 4892-3:2013 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
PD CEN/TS 17329-1:2021 Tracked Changes. Foodstuffs. General guidelines for the validation of qualitative real-time PCR methods. Single-laboratory validation
EN 13286-2:2010 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
EN ISO 4892-2:1999 Plastics - Methods of Exposure to Laboratory Light Sources - Part 2: Xenon-Arc Sources ISO 4892-2: 1994
EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps

Association Francaise de Normalisation, Experimental material Experimental method

NF P98-604*NF EN 12802:2012 Road marking materials - Laboratory methods for identification.
PR EN 3641:1994 Aerospace series - Test methods - Heat resisting alloys compacted materiel
NF X15-202:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods.
NF X15-205:1986 Laboratory equipment. Furnitures. Test methods.
NF B54-179*NF EN 13354:2009 Solid wood panels (SWP) - Bonding quality - Test method
NF Q60-501:1975 Méthode générale pour la réalisation en laboratoire d'une impression en vue d'évaluations ultérieures
NF B35-801:1972 Laboratory glassware. Porcelain laboratory apparatus. Quality and methods of test.
NF EN 12697-32:2019 Matériaux enrobés - Méthodes d'essai - Partie 32 : confection d'éprouvettes par compacteur vibratoire
NF X15-204:1986 Laboratory equipment. Benches. Test methods.
NF EN ISO 10722:2019 Géosynthétiques - Mode opératoire d'essai pour évaluer l'endommagement mécanique sous charge répétée - Endommagement causé par des matériaux granulaires (méthode d'essai en laboratoire)
NF P98-818-10*NF EN 12697-10:2017 Bituminous mixtures - Test methods - Part 10 : compactability
AC T51-808:2012 Plastiques - Évaluation expérimentale de l'oxobiodégradabilité de matériaux polyoléfiniques sous forme de films - Méthodologie et exigences
NF G38-123*NF EN ISO 10722:2019 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method)
XP CEN/TS 17455:2020 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Critères de performance des méthodes d'analyse des mycotoxines validées dans un seul laboratoire ou suite à un essai interlaboratoires
NF P94-040:1993 Soils : investigation and testing. Practical method for identifying the 0/50 mm fraction of a granular material. Determination of particle size and blue value.
NF X34-229*NF EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
XP CEN/TS 17329-1:2019 Denrées alimentaires - Lignes directrices générales pour la validation des méthodes de PCR qualitative en temps réel - Partie 1 : validation intralaboratoire
NF R12-755:2010 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods.
NF B40-305*NF EN 993-13:1995 Methods of test for dense shaped refractory products. Part 13 : specification for pyrometric reference cones for laboratory use.
NF B30-109*NF ISO 718:1986 Laboratory glassware. Methods for thermal shock tests.
NF X06-510*NF ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
XP V03-329-1*XP CEN/TS 17329-1:2019 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1 : single- laboratory validation
NF P98-231-2:1992 Tests relating to pavements. Compaction tests on non-bituminous materials. Part 2 : compactibility using the gyratory testing machine.
NF T51-195-2*NF EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2 : xenon-arc lamps
NF EN ISO 4892-2:2013 Plastiques - Méthodes d'exposition à des sources lumineuses de laboratoire - Partie 2 : lampes à arc au xénon
NF EN 14734:2022 Durabilité du bois et des matériaux dérivés du bois - Détermination de l'imprégnabilité d'essences de bois par des produits de préservation - Méthode de laboratoire

Danish Standards Foundation, Experimental material Experimental method

DS/EN 12802:2012 Road marking materials - Laboratory methods for identification
DS 1056.1:1981 Fire tests. Building materials. Non-combustibility test
DS/ISO 4892:1985 Plastics. Methods of exposure to laboratory light sources
DS/EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
DS/EN 12697-32+A1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
DS/EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
DS/EN 932-2:1999 Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples
DS/CEN/TS 17329-1:2021 Foodstuffs – General guidelines for the validation of qualitative real-time PCR methods – Part 1: Single-laboratory validation

Lithuanian Standards Office , Experimental material Experimental method

LST EN 12802-2011 Road marking materials - Laboratory methods for identification
LST EN 14727-2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
LST EN 12697-32+A1-2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
LST EN 15443-2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
LST EN 932-2-2002 Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples
LST CEN/TS 17329-1-2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation

AENOR, Experimental material Experimental method

UNE-EN 12802:2012 Road marking materials - Laboratory methods for identification
UNE-EN 12697-35:2017 Bituminous mixtures - Test methods - Part 35: Laboratory mixing
UNE-EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
UNE-EN 12697-32:2003+A1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
UNE-EN 15443:2011 Solid recovered fuels - Methods for the preparation of the laboratory sample
UNE 57017:1994 PULPS. LABORATORY BEATING. VALLEY BEATER METHOD.

CEN - European Committee for Standardization, Experimental material Experimental method

PREN 12802-2018 Road marking materials - Laboratory methods for identification
PD CEN/TS 15443:2006 Solid recovered fuels - Methods for laboratory sample preparation
EN ISO 4892-3:2006 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
PD CEN/TS 17329-1:2019 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation
EN 13286-2:2004 Unbound and hydraulically bound mixtures - Part 2: Test methods for the determination of the laboratory reference density and water content - Proctor compaction

Professional Standard - Public Safety Standards, Experimental material Experimental method

GA 111-1995 Solid room fire test method for surface materials

American Society for Testing and Materials (ASTM), Experimental material Experimental method

ASTM C802-96(2002) Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-96 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-96(2008)e1 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-09 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-09a Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-14 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-14(2022) Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM D8282-19 Standard Practice for Laboratory Test Method Validation and Method Development
ASTM D5744-18 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D5744-13 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D5744-13e1 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D3345-08 Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites
ASTM C1067-00(2007) Standard Practice for Conducting A Ruggedness or Screening Program for Test Methods for Construction Materials
ASTM C1067-00 Standard Practice for Conducting A Ruggedness or Screening Program for Test Methods for Construction Materials
ASTM D5744-12 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D3345-17 Standard Test Method for Laboratory Evaluation of Solid Wood for Resistance to Termites
ASTM D3980-87 Standard Practice for Interlaboratory Testing of Paint and Related Materials
ASTM D3980-88 Standard Practice for Interlaboratory Testing of Paint and Related Materials
ASTM C135-96(2022) Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
ASTM D2168-02 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
ASTM D2168-02a Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
ASTM D5744-07 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D5819-99 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D5819-21 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D5819-18 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D5819-05(2016) Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D3345-74(1999) Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites
ASTM C604-02(2007) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C604-02 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C604-98 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C604-02(2007)e1 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM E2658-15 Standard Practices for Verification of Speed for Material Testing Machines
ASTM E2658-15(2023) Standard Practices for Verification of Speed for Material Testing Machines
ASTM C1363-05 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM C1363-11 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM D2017-05 Standard Test Method of Accelerated Laboratory Test of Natural Decay Resistance of Woods
ASTM D2017-81(1994)e1 Standard Test Method for Accelerated Laboratory Test of Natural Decay Resistance of Woods
ASTM D2168-90(1996)e1 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
ASTM D7847-12 Standard Guide for Interlaboratory Studies for Microbiological Test Methods
ASTM D216-77(1982) Standard test method for calibration of laboratory mechanical earth compactors
ASTM E477-13 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
ASTM D4445-23 Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM F748-06 Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
ASTM D6704-08(2015) Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
ASTM D3345-22 Standard Test Method for Laboratory Evaluation of Wood for Resistance to Subterranean Termites
ASTM D2168-10 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
ASTM D1883-21 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM D6704-01 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
ASTM D6704-08 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
ASTM F748-16 Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
ASTM D1413-07 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
ASTM D1413-99 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
ASTM D1413-07e1 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
ASTM E949-88(1996) Standard Test Method for Total Moisture in a Refuse-Derived Fuel Laboratory Sample
ASTM E949-88(2004) Standard Test Method for Total Moisture in a Refuse-Derived Fuel Laboratory Sample
ASTM D8259/D8259M-21 Standard Test Method for Rotary Wheel Testing (RWT) of Compacted Asphalt Mixtures
ASTM D4968-16 Standard Practice for Annual Review of Test Methods and Specifications for Plastics
ASTM D4828-94(1999) Standard Test Methods for Practical Washability of Organic Coatings
ASTM D4828-94(2020) Standard Test Methods for Practical Washability of Organic Coatings
ASTM D4828-94(2016) Standard Test Methods for Practical Washability of Organic Coatings
ASTM C1519-02 Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C1519-02a Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C1519-10(2022) Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM D1883-16 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM F1408-20 Standard Practice for Subcutaneous Screening Test for Implant Materials
ASTM E2312-11(2019) Standard Practice for Tests of Cleanroom Materials
ASTM F1408-20a Standard Practice for Subcutaneous Screening Test for Implant Materials
ASTM E3264-21 Standard Guide for Homogeneity of Samples and Reference Materials Used for Inter- and Intra-Laboratory Studies
ASTM D7625-10 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method
ASTM F748-06(2010) Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
ASTM D6217-18 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM C953-87(1997) Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM D6217-11(2016) Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM C953-17 Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM D5452-20 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM C604-02(2012) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM E691-21 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-22 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM G160-12 Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials By Laboratory Soil Burial
ASTM E691-09e1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D4968-08 Standard Guide for Annual Review of Test Methods and Specifications for Plastics
ASTM D4968-19 Standard Practice for Annual Review of Test Methods and Specifications for Plastics
ASTM D4968-19a Standard Practice for Annual Review of Test Methods and Specifications for Plastics
ASTM G151-06 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
ASTM E531-76(1996)e1 Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials
ASTM E448-82(1997)e1 Standard Practice for Scleroscope Hardness Testing of Metallic Materials
ASTM D5496-15(2020) Standard Practice for In-Field Immersion Testing of Geosynthetics
ASTM D5025-05 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
ASTM D5025-20 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
ASTM D5025-20a Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
ASTM D4445-91(1996)e1 Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM D1413-05a Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
ASTM D1413-05 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
ASTM D1413-05b Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
ASTM D4445-09 Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM D4445-09a Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM D1749-93(1997) Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products
ASTM D1883-05 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D1883-99 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D1883-07e1 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D2216-10 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
ASTM D5452-08 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D969-85(2003)e1 Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM D969-85(1998) Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM D96-73(1984) Laboratory test method for degree of bleeding of road marking paint
ASTM D96-88(1998) Laboratory test method for degree of bleeding of road marking paint
ASTM G151-00 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
ASTM G151-97 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
ASTM G151-09 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
ASTM E873-82(1998) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
ASTM D3203-22 Standard Test Method for Percent Air Voids in Compacted Asphalt Mixtures
ASTM D559/D559M-15 Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
ASTM C1297-03 Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
ASTM D1796-04 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-97 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-97e1 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-83(1990)e1 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-97(2002) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-11 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)

HU-MSZT, Experimental material Experimental method

Sichuan Provincial Standard of the People's Republic of China, Experimental material Experimental method

DB51/T 1261-2011 Heat conduction experiment material

AR-IRAM, Experimental material Experimental method

Korean Agency for Technology and Standards (KATS), Experimental material Experimental method

KS F 2312-2022 Test method for soil compaction in laboratory
KS F 2312-1986 Test method for soil compaction in laboratory
KS B 6540-1975(2011) Testing Method of Vibrating Rollers
KS M ISO 11561-2009(2019) Ageing of thermal insulation materials－Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
KS A ISO TR 18930:2005 Imaging materials-Protocols for outdoor weathering experiments
KS A ISO 18930:2015 Imaging materials－Protocols for outdoor weathering experiments
KS F 2364-2013(2019) Standard test method for percent air voids in compacted dense and open asphalt mixtures
KS F 2494-2017 Standard test method of the laboratory permeability test for
KS F 2494-2017(2022) Standard test method of the laboratory permeability test for
KS F 2353-2010(2022) Standard test method for specific bulk gravity of compacted asphalt mixtures
KS F 2353-1985 Standard test method for specific bulk gravity of compacted asphalt mixtures
KS F 2316-2002 Test method for one－dimensional consolidation properties of soils using incremental loading
KS D 0299-2019 Laboratory method for the preparation of rust grades
KS F 2316-1982 Test method for one－dimensional consolidation properties of soils using incremental loading
KS K ISO 10722:2022 Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading —Damage caused by granular material(laboratory test method)
KS M ISO 3696:2010 Water for analytical laboratory use-Specification and test methods
KS E ISO 3085:2003 Iron ores－Experimental methods for checking the precision of sampling, sample preparation and measurement
KS M ISO 3696-2010(2020) Water for analytical laboratory use－Specification and test methods
KS E ISO 10226-2003(2022) Aluminium ores－Experimental methods for checking the bias of sampling
KS F 2398-2017 Testing method for resistance of compacted asphalt mixtures to moisture induced damage
KS F 2398-2017(2022) Testing method for resistance of compacted asphalt mixtures to moisture induced damage
KS F 2314-2001 Method for unconfined compression test of soils
KS F 2297-2019 General rule for test method of windows and doors
KS F 2314-1986 Method for unconfined compression test of soils
KS F 2297-1984 General rule for test method of windows and doors
KS B 4918-1995 Machine tools-geometric accuracy tests and practical tests-Test methods
KS M ISO 10191-2012(2017) Passenger car tyres－Verifying tyre capabilities－Laboratory test methods
KS M ISO 4892-2-2017(2022) Plastics－Methods of exposure to laboratory light sources－Part 2：Xenon-arc lamps

American National Standards Institute （ANSI), Experimental material Experimental method

ANSI/ASTM D3345:1996 Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites
ANSI/ASTM D2017:1996 Test Method for Accelerated Laboratory Test of Natural Decay Resistance of Woods
ANSI/AMCA 520-2009 Laboratory Methods of Testing Actuators
ANSI/ASTM D6617:2013 Practice For Laboratory Bias Detection Using Single Test Result from Standard Material
ANSI N15.51-2007 Methods of Nuclear Material Control - Measurement Control Program – Nuclear Materials Analytical Chemistry Laboratory (Institute for Nuclear Materials Management (INMM))
ANSI/NALFA LF-01-2010 Laminate Flooring Specifications and Test Methods
ANSI/ASTM D4445:1996 Method for Testing Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ANSI/ASTM E691:2013 PRACTICE FOR CONDUCTING AN INTERLABORATORY STUDY TO DETERMINE THE PRECISION OF A TEST METHOD
ANSI/ASTM F2875:2010 Guide for Laboratory Requirements Necessary to Test Commercial Cooking Appliances to ASTM Test Methods
ANSI N15.51-1990 Measurement Control Program - Nuclear Materials Analytical Chemistry Laboratory

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Experimental material Experimental method

GB/T 13942.1-1992 Method for laboratory test of natural decay resistance of woods
GB/T 18260-2015 Method of laboratory test for toxicity of wood preservatives against termites
GB/T 18260-2000 Laboratory test method for wood preservatives of determining the protective effectiveness of preservatives against termits
GB/T 18148-2000 Testing method of the compaction performance of rollers and compactors
GB/T 15036.2-2001 Solid wood flooring--Examination and test methods
GB/T 21747-2008 Educational laboratory equipment.Safety requirements and test methods for laboratory workbenches
GB/T 18148-2015 Earth-moving machinery.Testing method of the compaction performance of rollers and compactors
GB/T 14926.29-2001 Laboratory animal--Method for examination of polyoma virus(POLY)
GB/T 28876.2-2014 Flammability of materials in space experimental facilities.Part 2:Test methods
GB/T 16422.1-1996 Plastics--Methods of exposure to laboratory light sources. Part 1: General guidance
GB/T 16422.1-2006 Plastics. Methods of the exposure to laboratory light sources. Part 1: General guidance
GB/T 16422.2-1999 Plastics--Methods of exposure to laboratory light sources Part 2: Xenon--arc sources
GB/T 16422.2-2014 Plastics.Methods of exposure to laboratory light sources.Part 2:Xenon-arc sources
GB/T 18448.6-2001 Laboratory animal--Methods for examination of Helminth
GB 14924.3-2010(英文版) Laboratory animals—Nutrients of formula feeds
GB/T 13942.1-2009 Durability of wood.Part 1:Method for laboratory test of natural decay resistance
GB 6579-1986 Laboratory glassware－Methods for thermal shock test
GB/T 14926.28-2001 Laboratory animal--Method for examination of minute virus of mice(MVM)
GB/T 4757-2001 Methods for the batch flotation testing of fine coal
GB/T 6579-1986 Laboratory glassware--Methods for thermal shock test
GB/T 6682-1992 Water for analytical laboratory use--Specification and test methods
GB/T 4757-2013 Methods for the batch flotation testing of fine coal
GB/T 38502-2020 Test method for bactericidal effect of disinfectant in laboratory
GB/T 25943-2010 Aluminium ores.Experimental methods for checking the precision of sampling
GB/T 6682-2008 Water for analytical laboratory use.Specification and test methods
GB/T 33938-2017(英文版) Vertical roller mill laboratory bench application test method
GB/T 18448.2-2001 Laboratory animal--Methods for examination of Toxoplasma gondii
GB/T 14926.1-2001 Laboratory animal--Method for examination of salmonella sp
GB/T 14926.8-2001 Laboratory animal--Method for examination of Mycoplasma sp
GB/T 18448.7-2001 Laboratory animal--Method for examination of plasmodium spp
GB/T 18448.2-2008 Laboratory animal.Method for examination of Toxoplasma gondii
GB/T 14926.47-2008 Laboratory animal.Method for examination of Shigella spp.
GB/T 15036.2-2018(英文版) Solid wood flooring—Part 2:Examination methods
GB/T 16125-2012 Method for acute toxicity test of daphnia magna straus
GB/T 14926.47-2001 Laboratory animal--Method for examination of Shigella sp
GB/T 16422.3-1997 Plastics--Methods of exposure to laboratory light sources--Part 3: Fluorescent UV lamps
GB/T 16422.3-2014 Plastics.Methods of exposure to laboratory light sources.Part 3 :Fluorescent UV lamps
GB/T 15727-1995 Methods for thermal shock test of laboratory apparatus glass(stick method)

Group Standards of the People's Republic of China, Experimental material Experimental method

T/CALAS 52-2018 Laboratory animals - Review of laboratory animal program
T/CSTM 00796-2022 Materials experimental data - General requirements
T/CSTM 00795-2022 Materials experimental data-Requirements for scanning electron microscope images
T/CALAS 69-2019 Laboratory animals - Nutritional requirements of reed vole
T/QGCML 1470-2023 Material testing laboratory management platform technical specifications

BE-NBN, Experimental material Experimental method

NBN-EN 28233-1992
NBN T 04-444-1983 Benzyl chloride for industrial use - Methods of test
NBN T 01-211-1988 Water for analytical laboratory use - Specification and test methods
NBN-EN 348-1993 Protective clothing. Test method: Determination of behaviour of materials on impact of small splashes of molten metal

国家市场监督管理总局、中国国家标准化管理委员会, Experimental material Experimental method

GB/T 37844-2019 Space materials science experiment—Preparation specification for solid experiment sample
GB/T 41215-2021 Space materials science experiment—Ground-based matching test specification
GB/T 16422.1-2019 Plastics—Methods of exposure to laboratory light sources—Part 1:General guidance
GB/T 16422.2-2022 Plastics—Methods of exposure to laboratory light sources—Part 2: Xenon-arc lamps
GB/T 37469-2019 Space materials science experiment—Management standard for samples
GB/T 16422.3-2022 Plastics—Methods of exposure to laboratory light sources—Part 3: Fluorescent UV lamps
GB/T 36167-2018 Method for coal preparation laboratory timed-release flotation analysis

Taiwan Provincial Standard of the People's Republic of China, Experimental material Experimental method

CNS 5548-1981 Test Method for Solvent Resistance of Applied Marking Materials

VN-TCVN, Experimental material Experimental method

TCVN 4851-1989 Water for analytical laboratory use.Specifications and test methods
TCVN 4201-2012 Soils.Laboratory methods for determination of compaction characteristics
TCVN 6804-2001 Aluminium ores.Experimental methods for checking the precision of sampling
TCVN 6805-2001 Aluminium ores.Experimental methods for checking the bias of sampling

Liaoning Provincial Standard of the People's Republic of China, Experimental material Experimental method

DB21/T 1971-2012 General technical requirements for interior decoration materials of mobile laboratory experiment cabin

RU-GOST R, Experimental material Experimental method

GOST 27640-1988 Engineering materials and lubricants. Experimental evaluation of coefficient of friction
GOST 9.049-1991 Unified system of corrosion and ageing protection. Polimer materials and their components. Methods of laboratory tests for mould resistance
GOST R 54228-2010 Solid recovered fuels. Methods for laboratory sample preparation
GOST R 53133.2-2008 Medical laboratory technologies. Quality control of clinical laboratory tests. Part 2. Rules for intra-laboratory quality control of quantitative methods of clinical laboratory tests using control materials
GOST 28842-1990 Hydraulic turbines. Methods of field acceptance tests
GOST R 59597-2021 Soils. Laboratory method for triaxial test of frozen soils
GOST 33509-2015 Solid recovered fuel. Methods for laboratory sample preparation
GOST R 54229-2010 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
GOST R 55457-2013 Horses. Methods for laboratory helminthosis diagnostics
GOST 33510-2015 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample

NZ-SNZ, Experimental material Experimental method

NZS 4407.3.1:1991 Methods of testing road aggregates - Laboratory tests - Test 3.1 The water content of aggregate

Anhui Provincial Standard of the People's Republic of China, Experimental material Experimental method

DB34/T 2987-2017 Experimental method for thermal physical properties of thermal insulation materials (constant temperature plane heat source method)

US-FCR, Experimental material Experimental method

FCR COE ER 1140-1-210-1979 LABORATORY INVESTIGATIONS AND MATERIALS TESTING
FCR FED SPEC PUB 736-1987 PROCEEDINGS OF THE CONFERENCE ON ACCREDITATION OF CONSTRUCTION MATERIALS TESTING LABORATORIES

CN-STDBOOK, Experimental material Experimental method

图书 A-4607 Comprehensive Experimental Course of Mechanics of Materials

GB-REG, Experimental material Experimental method

REG NASA-LLIS-0735--2000 Lessons Learned ?Material Selection Practices

Professional Standard - Aquaculture, Experimental material Experimental method

SC/T 5003-2002 Plastic float test method Rigid foam

ANSI - American National Standards Institute, Experimental material Experimental method

N15.51-2007 Methods of Nuclear Material Control - Measurement Control Program – Nuclear Materials Analytical Chemistry Laboratory (INMM)

Standard Association of Australia （SAA）, Experimental material Experimental method

AS 5101.4:2008 Methods for preparation and testing of stabilized materials - Unconfined compressive strength of compacted materials
AS 5101.5:2008 Methods for preparation and testing of stabilized materials - Absorption, swell and capillary rise of compacted materials
AS 1141.52:2008 Methods for sampling and testing aggregates - Unconfined cohesion of compacted pavement materials

Professional Standard - Water Conservancy, Experimental material Experimental method

SL 112-1995 Calibration method of compaction instrument
SL 112-2017 Calibration method of compaction instrument
SL 128-1995 Test method for laboratory concrete mixer

水利部, Experimental material Experimental method

SL/T 112-2017 Compaction instrument calibration method
SL/T 128-2017 Calibration method of mixer for concrete experiment

RO-ASRO, Experimental material Experimental method

STAS 8759-1986 PLASTICS Methods of exposure to laboratory light sources
STAS 3035-1965
STAS 5266/2-1990 Solid fucls COKING POWER DETERMINATION Roga mcthod

International Organization for Standardization (ISO), Experimental material Experimental method

ISO 4892:1981 Plastics; Methods of exposure to laboratory light sources
ISO/TR 18930:2001 Imaging materials - Protocols for outdoor weathering experiments
ISO/PRF 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
ISO 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
ISO/CD 11781:2004 Foodstuffs — General guidelines for single-laboratory validation of qualitative real-time PCR methods
ISO 10722:2019 Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading — Damage caused by granular material (laboratory test method)
ISO 3085:2002 Iron ores - Experimental methods for checking the precision of sampling, sample preparation and measurement
ISO 718:1982 Laboratory glassware — Methods for thermal shock tests
ISO 1775:1975 Porcelain laboratory apparatus; Requirements and methods of test
ISO 3696:1987 Water for analytical laboratory use; Specification and test methods
ISO/IEC GUIDE 43:1984 Development and operation of laboratory proficiency testing
ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
ISO 4892-2:2006 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
ISO 4892-2:1994 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources

NO-SN, Experimental material Experimental method

NS 8003-1982 Geotechnical testing - Laboratory methods - Plastic limit
NS 8011-1982 Geotechnical testing - Laboratory methods - Density
NS 8001-1982 Geotechnical testing - Laboratory methods - Percussion liquid limit
NS 8002-1982 Geotechnical testing - Laboratory methods - Fall cone liquid limit
NS 8004-1982 Geotechnical testing - Laboratory methods - Shrinkage limit

ES-AENOR, Experimental material Experimental method

UNE 104-281 Pt.2-3-1986
UNE 104-281 Pt.2-6-1986
UNE 104-281 Pt.2-4-1986
UNE 104-281 Pt.2-2-1986
UNE 112-042-1994 Autocatalytic nickel-phosphorus coatings. Specifications and test methods
UNE 104-281 Pt.2-1-1986
UNE 106-106-1991
UNE 53-131-1990
UNE 7 118
UNE 135-360-1994 Vertical road traffic signs. Signing of guiding traffic. Junction marker in the polymeric material. Characteristics, dimensions and test methods
UNE 53 225

Professional Standard - Forestry, Experimental material Experimental method

LY/T 1283-1998 Method of laboratory test for toxicity of wood preservatives to decay fungi
LY/T 1284-1998 Method of laboratory test for toxicity of wood preservatives to soft-rot fungus
LY/T 1284-2012 Method of laboratory test for toxicity of wood preservatives to soft-rot fungus
LY/T 1283-02011 Laboratory test method for toxicity of wood preservatives to decaying fungi
LY/T1284-2012 Method of laboratory test for toxicity of wood preservatives to soft-rot fungus

IN-BIS, Experimental material Experimental method

Japanese Industrial Standards Committee (JISC), Experimental material Experimental method

JIS A 1217:1993 Test method for one-dimensional consolidation properties of soils
JIS A 8801:1982 Testing method of vibrating rollers

TR-TSE, Experimental material Experimental method

TS 1069-1972 METHODS OF LABORATORY TESTS FOR MEAT PRODUCTS
TS 784-1969 METHODS FOR THERMAL SHOCK TESTS ON LABORATORY GLASSWARE

NL-NEN, Experimental material Experimental method

NEN-EN 590-1993 Automative fuels. Diesel. Requirements and methods of test
NEN-EN 589-1993 Automative fuels. LPG. Requirements and methods of test
NEN 3102-1989 Chemical analysis Laboratory apparatus, reagents and auxüiary materials

IT-UNI, Experimental material Experimental method

UNI 7092-1972
UNI 4008-1966 Corrosion of metallic materials. Laboratory standard tests. Corrosion by alternate immersion.
UNI CEN/TS 17329-1-2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation

未注明发布机构, Experimental material Experimental method

BS ISO 11561:1999(2000) Ageing of thermal insulation materials — Determination of the long - term change in thermal resistance of closed - cell plastics (accelerated laboratory test methods)
BS ISO 3086:2006(2010) Iron ores — Experimental methods for checking the bias of sampling
JIS M 8709:2023 Iron ores -- Experimental methods for checking the bias of sampling
BS EN 273:1992 Wood preservatives — Determination of the curative action against Lyctus brunneus (Stephens) (laboratory method)

Professional Standard - Navy, Experimental material Experimental method

HJB 319-2005 Seagrass-1 fuze laboratory test method
HJB 320-2005 Pomegranate-5 fuze laboratory test method

Military Standard of the People's Republic of China-General Armament Department, Experimental material Experimental method

GJB 1534A-2004 Torpedo sea acceptance test evaluation method
GJB 9227-2017 Joint combat simulation experimental method
GJB 9399-2018 General methods for military laboratory verification

Gansu Provincial Standard of the People's Republic of China, Experimental material Experimental method

DB62/T 781.2-2002 Membrane side seeder test method

PL-PKN, Experimental material Experimental method

PN H11079-1973 Foundry moulding materials Laboratory tests Sempling
PN BN 6091-01-1963

Professional Standard - Agriculture, Experimental material Experimental method

NY/T 541-2002 Sampling methods for laboratory investigation of animal diseases
GB 6682-1992 Analytical laboratory water specifications and test methods

Henan Provincial Standard of the People's Republic of China, Experimental material Experimental method

DB4106/T 3-2019 Sampling method for animal epidemic laboratory inspection

Professional Standard - Commodity Inspection, Experimental material Experimental method

SN/T 1492-2015 Standard practice for laboratory bias evaluation using single test result from standard material
SN/T 1492-2004 Standard practice for laboratory bias evaluation using single test result from standard material

KR-KS, Experimental material Experimental method

KS V 8891-2023 Laboratory test method for skin friction of antifouling paints by rotating drum
KS K ISO 10722-2022 Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading —Damage caused by granular material(laboratory test method)
KS M ISO 4892-1-2017 Plastics－Methods of exposure to laboratory light sources－Part 1：General guidance
KS F 2384-2013(2023) Standard test method for uncompacted void content of fine aggregate
KS M ISO 4892-2-2017 Plastics－Methods of exposure to laboratory light sources－Part 2：Xenon-arc lamps

The American Road & Transportation Builders Association, Experimental material Experimental method

AASHTO TP 117-2015 Standard Method of Test for Determination of the Voids of Dry Compacted Filler
AASHTO R 18-2010 Standard Recommended Practice for Establishing and Implementing a Quality Management System for Construction Materials Testing Laboratories
AASHTO R 18-2016 Standard Recommended Practice for Establishing and Implementing a Quality Management System for Construction Materials Testing Laboratories
AASHTO T 304-1996 Standard Method of Test for Uncompacted Void Content of Fine Aggregate
AASHTO T 304-2008 Standard Method of Test for Uncompacted Void Content of Fine Aggregate

GM North America, Experimental material Experimental method

GM GM9125P-1991 Procedures for Laboratory Accelerated Exposure of Automotive Materials

American Gear Manufacturers Association, Experimental material Experimental method

AGMA 92FTM1-1992 Experimental Characterization of Surface Durability of Materials for Worm Gears

国家能源局, Experimental material Experimental method

SY/T 7469-2020 Sandstone Dissolution Simulation Experimental Method

YU-JUS, Experimental material Experimental method

JUS B.E8.095-1987 Laboratory glassware. Methods for thermal shock test
JUS G.S2.657-1988 Plastics and rubber. Methods of exposure to laboratory light sources

CZ-CSN, Experimental material Experimental method

CSN ISO 1775:1994 Porcelain laboratory apparatus. Requirements and methods of test
CSN 64 5464-1978 Cellulav plastics and cellular rubber atcrials. Laboratory method of test to ssess the horizontál burning haracleristics
CSN 72 1010-1989 Determination of earth volume mass. Laboratory and field methods

ZA-SANS, Experimental material Experimental method

SANS 3696:1987 Water for analytical laboratory use - Specification and test methods

未注明发布机构, Experimental material Experimental method

BS ISO 11561:1999(2000) Ageing of thermal insulation materials — Determination of the long - term change in thermal resistance of closed - cell plastics (accelerated laboratory test methods)
BS ISO 3086:2006(2010) Iron ores — Experimental methods for checking the bias of sampling
JIS M 8709:2023 Iron ores -- Experimental methods for checking the bias of sampling
BS EN 273:1992 Wood preservatives — Determination of the curative action against Lyctus brunneus (Stephens) (laboratory method)

AASHTO - American Association of State Highway and Transportation Officials, Experimental material Experimental method

R 18-2017 Standard Recommended Practice for Establishing and Implementing a Quality Management System for Construction Materials Testing Laboratories
R 18-2016 Standard Recommended Practice for Establishing and Implementing a Quality Management System for Construction Materials Testing Laboratories
R 18-2008 Standard Recommended Practice for Establishing and Implementing a Quality Management System for Construction Materials Testing Laboratories
R 18-2010 Standard Recommended Practice for Establishing and Implementing a Quality Management System for Construction Materials Testing Laboratories
R 18-2018 Standard Recommended Practice for Establishing and Implementing a Quality Management System for Construction Materials Testing Laboratories

(U.S.) Ford Automotive Standards, Experimental material Experimental method

FORD FLTM INDEX VOL 2-2006 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 2 PHYSICAL TEST METHODS
FORD FLTM INDEX VOL 3-2007 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 3 PHYSICAL TEST METHODS
FORD FLTM INDEX VOL 4-2007 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 4 PHYSICAL TEST METHODS
FORD FLTM INDEX VOL 5-2007 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 5 PHYSICAL TEST METHODS
FORD FLTM INDEX VOL 6-2007 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 6 PHYSICAL TEST METHODS
FORD FLTM INDEX VOL 7-2007 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 7 PHYSICAL TEST METHODS
FORD FLTM INDEX VOL 8-2007 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 8 PHYSICAL TEST METHODS

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Experimental material Experimental method

GB/T 33710-2017 Mobile laboratory—Method for classification and gradation

Canadian Standards Association (CSA), Experimental material Experimental method

CSA C22.2 No.2556-07-2007 Wire and Cable Test Methods Second Edition

Jilin Provincial Standard of the People's Republic of China, Experimental material Experimental method

DB22/T 281-2019 Fungal Laboratory Disinfection and Sterilization Methods

Professional Standard-Ships, Experimental material Experimental method

CB/Z 190-1996 Rapid test method of actual submarine
CB/Z 192-1996 Maneuverability test method of actual submarine
CB/Z 194-1996 Seakeeping test method of actual submarine

Xinjiang Provincial Standard of the People's Republic of China, Experimental material Experimental method

DB65/T 2728-2019 Production test method of dried fruit grader
DB65/T 3517-2019 Production experiment method of fruit and vegetable dryer

Professional Standard - Energy, Experimental material Experimental method

NB/T 51019-2014 Method of compaction testing of solid backfilling materials

Professional Standard - Coal, Experimental material Experimental method

MT/T 144-1997 Methods for the coal flotation test by progressive release in coal separation lab

Shanxi Provincial Standard of the People's Republic of China, Experimental material Experimental method

DB14/T 2798-2023 Specification for verification of chemical analysis methods in testing laboratories

AT-ON, Experimental material Experimental method

ONR CEN/TS 17329-1-2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation

ES-UNE, Experimental material Experimental method

UNE-CEN/TS 17329-1:2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation (Endorsed by Asociación Española de Normalización in August of 2021.)

European Association of Aerospace Industries, Experimental material Experimental method

AECMA PREN 2002-8-1997 Aerospace Series Metallic Materials Test Methods Part 8 - Micrographic Determination of Grain Size Edition P 2; ASTM E112:1996