ZH
RU
ES
kettle effect
kettle effect, Total:500 items.
In the international standard classification, kettle effect involves: Water quality, Products of the chemical industry, Materials and articles in contact with foodstuffs, Hydraulic construction, Installations in buildings, Quality, Structures of buildings, Farming and forestry, Hydraulic energy engineering, Environmental protection, Geology. Meteorology. Hydrology, Air quality, Solar energy engineering, Plastics, Vocabularies, Character sets and information coding, Nuclear energy engineering, Construction materials, Road engineering, Protection against fire, Inks. Printing inks, Analytical chemistry, Testing of metals, Test conditions and procedures in general, Microbiology, Raw materials for rubber and plastics, Fishing and fish breeding, Commercial vehicles, Rubber, External water conveyance systems, Services, Electrical wires and cables, Paints and varnishes, Clothes, Pipeline components and pipelines, Heat recovery. Thermal insulation, Products of the textile industry, Waxes, bituminous materials and other petroleum products, Equipment for petroleum and natural gas industries, Environmental testing, Electrical engineering in general, Surface treatment and coating, Occupational safety. Industrial hygiene, Domestic safety, Fertilizers, Corrosion of metals.
Korean Agency for Technology and Standards (KATS), kettle effect
- KS I 3225-2022 Equipment for water supply service ― Test methods of effect to water quality
- KS I 3225-2009(2019) Equipment for water supply service－ Test methods of effect to water quality
- KS M ISO 4611-2012(2022) Plastics－Determination of the effects of exposure to damp heat, water spray and salt mist
- KS M ISO 4611-2012(2017) Plastics－Determination of the effects of exposure to damp heat, water spray and salt mist
- KS F 2352-1995 Testing method for effect of water on cohesion of compacted bitminous mixtures
- KS I ISO 15522:2010 Water quality－Determination of the inhibitory effect of water constituents on the growth of activated sludge microorganisms
- KS I ISO 20079:2006 Water quality－Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor)－Duckweed growth inhibition test
- KS I ISO 20079-2006(2021) Water quality－Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor)－Duckweed growth inhibition test
- KS F 2549-1997 Testing method for potential volume change of cement-aggregate combinations
- KS L ISO 10051-2006(2021) Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
- KS M ISO 10051-2012(2017) Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
- KS L ISO 10051-2006(2016) Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
- KS I ISO 6341:2008 Water quality-Determination of the inhibition of the mobility of Daphnia magna Straus(Cladocera, Crustacea)-Acute toxicity test
- KS I ISO 6341:2014 Water quality — Determination of the inhibition of the mobility of Daphnia magna Straus(Cladocera, Crustacea) — Acute toxicity test
- KS F 2352-2005 Testing method for effect of water on cohesion of compacted asphalt mixtures
- KS K ISO 2551:2008 Machine-made textile floor coverings－Determination of dimensional changes due to the effects of varied water and heat conditions
- KS M ISO TR 15235-2012(2017) Preparation of steel substrates before application of paints and related products－Collected information on the effect of levels of water-soluble salt contamination
- KS I ISO 10229-2008(2018) Water quality－Deter mination of the prolonged toxicity of substances to freshwater fish－Method for evoluting the effects of substances on the growth rate of rainbow traout[Oncorhynchus mykiss Walbaum(
- KS M ISO TR 15235:2021 Preparation of steel substrates before application of paints and related products — Collected information on the effect of levels of water-soluble salt contamination
American National Standards Institute （ANSI), kettle effect
British Standards Institution (BSI), kettle effect
- BS EN 12873-4:2021 Influence of materials on water intended for human consumption - Influence due to migration - Test method for water treatment membranes
- BS EN 12873-4:2006 Influence of materials on water intended for human consumption - Influence due to migration - Test method for water treatment membranes
- BS EN 14944-1:2006 Influence of cementitious products on water intended for human consumption - Test methods - Influence of factory made cementitious products on organoleptic parameters
- 20/30415231 DC BS EN 12873-4. Influence of materials on water intended for human consumption. Influence due to migration - Part 4. Test method for water treatment membranes
- 21/30426947 DC BS EN 14944-1. Influence of cementitious products on water intended for human consumption. Test methods - Part 1. Influence of factory made cementitious products on organoleptic parameters
- BS EN 12873-3:2006 Influence of materials on water intended for human consumption - Influence due to migration - Test method for ion exchange and adsorbent resins
- BS CWA 14247:2001 Water treatment membranes - Influence of materials on water intended for human consumption - Test method
- 15/30317321 DC BS EN 14944-1. Influence of cementitious products on water intended for human consumption. Test methods. Part 1. Influence of migration from factory made cementitious products on the organoleptic parameters
- BS ISO 26367-1:2011 Guidelines for assessing the adverse environmental impact of fire effluents - General
- CWA 14247-2001 Water treatment membranes. Influence of materials on water intended for human consumption. Test method
- 20/30415228 DC BS EN 12873-2. Influence of materials on water intended for human consumption. Influence due to migration - Part 2. Test method for non-metallic and noncementitious site-applied materials
- BS EN 12873-2:2021 Tracked Changes. Influence of materials on water intended for human consumption. Influence due to migration. Test method for non-metallic and noncementitious site-applied materials
- BS EN 15768:2015 Influence of materials on water intended for human consumption. GC-MS identification of water leachable organic substances
- BS EN 12873-1:2003 Influence of materials on water intended for human consumption - Influence due to migration - Test method for non-metallic and non-cementitious factory made products
- BS EN 12873-2:2005 Influence of materials on water intended for human consumption - Influence due to migration - Test method for non-metallic and non-cementitious site-applied materials
- BS EN 14395-1:2004 Influence of organic materials on water intended for human consumption - Organoleptic assessment of water in storage systems - Test method
- BS 6920-2.5:2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - The extraction of substances that may be of concern to public health
- BS EN 12873-3:2019 Tracked Changes. Influence of materials on water intended for human consumption. Influence due to migration. Test method for ion exchange and adsorbent resins
- BS ISO 26367-3:2022 Guidelines for assessing the adverse environmental impact of fire effluents - Sampling and analysis
- BS EN 16421:2014 Influence of materials on water for human consumption. Enhancement of microbial growth (EMG)
- BS EN 1420-1:1999 Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Influence of organic materials on water intended for human consumption - Determination of odour and flavour
- BS EN 17528:2022 Clothing. Physiological effects. Measurement of water vapour resistance by means of a sweating manikin
- BS ISO 20079:2006 Water quality - Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) - Duckweed growth inhibition test
- BS DD 256:2002 Assessment of the potential for metallic materials to affect adversely the quality of water intended for human consumption. Specification
- BS ISO 26367-1:2019 Tracked Changes. Guidelines for assessing the adverse environmental impact of fire effluents. General
- BS EN 16056:2012 Influence of metallic materials on water intended for human consumption. Method to evaluate the passive behaviour of stainless steels
- BS EN 14718:2014 Influence of organic materials on water intended for human consumption. Determination of the chlorine demand. Test method
- BS EN 14718:2006 Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method
- BS 6920-1:2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Specification
- BS EN 12873-1:2014 Influence of materials on water intended for human consumption. Influence due to migration. Test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous enamel) materials
- BS EN IEC 60695-5-1:2021 Tracked Changes. Fire hazard testing. Corrosion damage effects of fire effluent. General guidance
- BS EN 16057:2012 Influence of metallic materials on water intended for human consumption. Determination of residual surface lead (Pb). Extraction method
- BS 6920-3:2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - High temperature tests
CZ-CSN, kettle effect
- CSN 75 0255-1987 Calculation of wave effects on waterworks and weir basins
- CSN 91 0210 Cast.9-1979 Testing of furniture surface coating. Resistance oí the coat to the effect of vvater vapour
- CSN 34 5735-1986 Electronic products Resistance test against environmental effects. Hoar frost and dew test
Danish Standards Foundation, kettle effect
- DS/EN 12873-4:2006 Influence of materials on water intended for human consumption – Influence due to migration – Part 4: Test method for water treatment membranes
- DS/EN 14944-1:2006 Influence of cementitious products on water intended for human consumption – Test methods – Part 1: Influence of factory made cementitious products on organoleptic parameters
- DS/CEN/TR 16364:2012 Influence of materials on water intended for human consumption - Influence due to migration - Prediction of migration from organic materials using mathematical modelling
- DS/EN ISO 4611:2011 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist
- DS/EN 12873-1:2004 Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for non-metallic and non-cementitious factory made products
- DS/EN 12873-3:2006 Influence of materials on water intended for human consumption - Influence due to migration - Part 3: Test method for ion exchange and adsorbent resins
- DS/EN 12873-2:2006 Influence of materials on water intended for human consumption - Influence due to migration - Part 2: Test method for non-metallic and non-cementitious site-applied materials
- DS/EN 14718:2006 Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method
- DS/EN 16056:2012 Influence of metallic materials on water intended for human consumption - Method to evaluate the passive behaviour of stainless steels
- DS/EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
- DS/EN 14944-3:2008 Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products
- DS/EN 15704:2009 Liming materials - Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
Lithuanian Standards Office , kettle effect
- LST EN 12873-4-2006 Influence of materials on water intended for human consumption - Influence due to migration - Part 4: Test method for water treatment membranes
- LST EN 14944-1-2006 Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters
- LST EN 12873-1-2004 Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for non-metallic and non-cementitious factory made products
- LST EN 12873-3-2006 Influence of materials on water intended for human consumption - Influence due to migration - Part 3: Test method for ion exchange and adsorbent resins
- LST EN ISO 4611:2011 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
- LST EN 12873-2-2005 Influence of materials on water intended for human consumption - Influence due to migration - Part 2: Test method for non-metallic and non-cementitious site-applied materials
- LST EN 14718-2006 Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method
- LST EN 16057-2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
- LST EN 16056-2012 Influence of metallic materials on water intended for human consumption - Method to evaluate the passive behaviour of stainless steels
- LST EN 15704-2009 Liming materials - Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
German Institute for Standardization, kettle effect
- DIN EN 12873-4:2022 Influence of materials on water intended for human consumption - Influence due to migration - Part 4: Test method for water treatment membranes
- DIN EN 12873-4:2006 Influence of materials on water intended for human consumption - Influence due to migration - Part 4: Test method for water treatment membranes English version of DIN EN 12873-4:2006-06
- DIN EN 12873-4:2022-01 Influence of materials on water intended for human consumption - Influence due to migration - Part 4: Test method for water treatment membranes; German version EN 12873-4:2021
- DIN EN 12873-4:2020 Influence of materials on water intended for human consumption - Influence due to migration - Part 4: Test method for water treatment membranes; German and English version prEN 12873-4:2020
- DIN EN 14944-1:2006 Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters English version of DIN EN 14944-1:2006-07
- DIN EN 14944-1:2021-09 Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters; German and English version prEN 14944-1:2021 / Note: Date of issue 2021-08-2...
- DIN EN 14944-1:2006-07 Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters; German version EN 14944-1:2006 / Note: To be replaced by DIN EN 14944-1 (201...
- DIN CEN/TR 16364:2012-09*DIN SPEC 19811:2012-09 Influence of materials on water intended for human consumption - Influence due to migration - Prediction of migration from organic materials using mathematical modelling; German version CEN/TR 16364:2012
- DIN EN 12873-2:2022 Influence of materials on water intended for human consumption - Influence due to migration - Part 2: Test method for non-metallic and noncementitious site-applied materials
- DIN EN 12873-2:2022-02 Influence of materials on water intended for human consumption - Influence due to migration - Part 2: Test method for non-metallic and noncementitious site-applied materials; German version EN 12873-2:2021
- DIN EN 14944-2:2023-05 Influence of cementitious products on water intended for human consumption - Test methods - Part 2: Influence of migration from siteapplied cementitious products and associated noncementitious products on the organoleptic parameters; German and English...
- DIN EN ISO 4611:2011-04 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010); German version EN ISO 4611:2010
- DIN EN 12873-3:2006 Influence of materials on water intended for human consumption - Influence due to migration - Part 3: Test method for ion exchange and adsorbent resins English version of DIN EN 12873-3:2006-06
- DIN 16524-5:1998 Testing of prints and printing inks in graphic technology - Resistance to various physical and chemical influences - Part 5: Resistance to sterilization with autoclave
- DIN 16524-5:2012 Testing of prints and printing inks in graphic technology - Resistance to various physical and chemical influences - Part 5: Resistance to sterilization with autoclave
- DIN EN ISO 4611:2009 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2008); English version of DIN EN ISO 4611:2009-02
- DIN EN 12873-3:2017 Influence of materials on water intended for human consumption - Influence due to migration - Part 3: Test method for ion exchange and adsorbent resins; German and English version prEN 12873-3:2017
- DIN EN 12873-3:2019-05 Influence of materials on water intended for human consumption - Influence due to migration - Part 3: Test method for ion exchange and adsorbent resins; German version EN 12873-3:2019 / Note: This standard is part of the DVGW body of rules.
- DIN EN 12873-1:2004 Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for non-metallic and non-cementitious factory made products; German version EN 12873-1:2003
- DIN EN 1420-1:1999 Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Part 1: Test method; German version EN 1420-1:1999
- DIN EN 15768:2015-05 Influence of materials on water intended for human consumption - GC-MS identification of water leachable organic substances; German version EN 15768:2015
- DIN EN 16421:2015-05 Influence of materials on water for human consumption - Enhancement of microbial growth (EMG); German version EN 16421:2014 / Note: This standard is part of the DVGW body of rules.
- DIN EN 12873-3:2019 Influence of materials on water intended for human consumption - Influence due to migration - Part 3: Test method for ion exchange and adsorbent resins
- DIN EN 14944-2:2023 Influence of cementitious products on water intended for human consumption - Test methods - Part 2: Influence of migration from siteapplied cementitious products and associated noncementitious products on the organoleptic parameters; German and English...
- DIN 4095:1990-06 Planning, design and installation of drainage systems protecting structures against water in the ground / Note: To be replaced by DIN 4095-1 (in preparation).
- DIN ISO 16191:2019-08 Water quality - Determination of the toxic effect of sediment on the growth behaviour of Myriophyllum aquaticum (ISO 16191:2013)
- DIN EN 12873-2:2020 Influence of materials on water intended for human consumption - Influence due to migration - Part 2: Test method for non-metallic and non-cementitious site-applied materials; German and English version prEN 12873-2:2020
- DIN EN ISO 20079:2006 Water quality - Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) - Duckweed growth inhibition test (ISO 20079:2005); English version of DIN EN ISO 20079:2006-12
- DIN EN 14718:2006 Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method; English version of DIN EN 14718:2006-10
- DIN CEN/TR 16364:2012 Influence of materials on water intended for human consumption - Influence due to migration - Prediction of migration from organic materials using mathematical modelling; German version CEN/TR 16364:2012
- DIN EN 12873-2:2005 Influence of materials on water intended for human consumption - Influence due to migration - Part 2: Test method for non-metallic and non-cementitious site-applied materials; German version EN 12873-2:2005
- DIN EN 14395-1:2005 Influence of organic materials on water intended for human consumption - Organoleptic assessment of water in storage systems - Part 1: Test method; German version EN 14395-1:2004
- DIN EN 14718:2015-03 Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method; German version EN 14718:2014
- DIN EN 15768:2015 Influence of materials on water intended for human consumption - GC-MS identification of water leachable organic substances; German version EN 15768:2015
- DIN EN 1420:2016-05 Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems; German version EN 1420:2016 / Note: This standard is part of the DVGW body of rules.
- DIN EN 14944-3:2008 Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products; German version EN 14944-3:2007
- DIN EN 14944-3:2009 Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products; German version EN 14944-3:2007
- DIN EN 16421:2015 Influence of materials on water for human consumption - Enhancement of microbial growth (EMG); German version EN 16421:2014
- DIN EN 16057:2012-07 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method; German version EN 16057:2012
- DIN 50930-6:2001 Corrosion of metals - Corrosion of metallic materials under corrosion load by water inside of tubes, tanks and apparatus - Part 6: Influence of the composition of drinking water
- DIN EN 14395-1:2005-01 Influence of organic materials on water intended for human consumption - Organoleptic assessment of water in storage systems - Part 1: Test method; German version EN 14395-1:2004
AENOR, kettle effect
- UNE-EN 12873-4:2007 Influence of materials on water intended for human consumption - Influence due to migration - Part 4: Test method for water treatment membranes
- UNE-EN 14944-1:2007 Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters
- UNE-CEN/TR 16364:2015 IN Influence of materials on water intended for human consumption - Influence due to migration - Prediction of migration from organic materials using mathematical modelling
- UNE-EN 16421:2015 Influence of materials on water for human consumption - Enhancement of microbial growth (EMG)
- UNE-EN 12873-3:2007 Influence of materials on water intended for human consumption - Influence due to migration - Part 3: Test method for ion exchange and adsorbent resins
- UNE-EN 15768:2015 Influence of materials on water intended for human consumption - GC-MS identification of water leachable organic substances
- UNE-EN 12873-2:2005 Influence of materials on water intended for human consumption - Influence due to migration - Part 2: Test method for non-metallic and non-cementitious site-applied materials
- UNE-EN ISO 4611:2011 Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
- UNE 53127:2002 Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame.
- UNE-EN 14718:2015 Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method
- UNE-EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
- UNE-EN 16056:2012 Influence of metallic materials on water intended for human consumption - Method to evaluate the passive behaviour of stainless steels
- UNE-EN 15704:2009 Liming materials - Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
- UNE-EN 12873-1:2014 Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous enamel) materials
National Sanitation Foundation (NSF), kettle effect
- NSF 61-2011 Drinking Water System Components - Health Effects
- NSF 53-2011 Drinking Water Treatment Units - Health Effects
- NSF 61 ADD-2012 Drinking Water System Components - Health Effects
- NSF 53A ADD 1-2008 Drinking water treatment units - Health effects
- NSF 61A ADD 1-2007 Drinking water system components Health effects
- NSF 61 ERTA 1-2013 Drinking water system components - Health effects
- NSF 60-2011 Drinking Water Treatment Chemicals - Health Effects
- NSF 60 ADD-2012 Drinking Water Treatment Chemicals - Health Effects
- NSF P151-1995 Health Effects from Rainwater Catchment System Components
- NSF 61-2008 Drinking Water System Components - Health Effects
- NSF 53E-2009 Drinking Water Treatment Units - Health Effects
- NSF 61-2010 Drinking Water System Components - Health Effects
- NSF 61A-2010 Drinking Water System Components - Health Effects
- NSF 53-2010 Drinking Water Treatment Units - Health Effects
- NSF 61-2012 Drinking Water System Components - Health Effects
- NSF 53-2012 Drinking Water Treatment Units - Health Effects
- NSF 53-2013 Drinking Water Treatment Units - Health Effects
- NSF 53-2014 Drinking Water Treatment Units - Health Effects
- NSF 61A-2014 Drinking Water System Components - Health Effects
- NSF 53-2015 Drinking Water Treatment Units - Health Effects
- NSF 61 ERTA-2016 Drinking Water System Components - Health Effects
- NSF 61-2015 Drinking Water System Components - Health Effects
- NSF 60-2009 Drinking Water Treatment Chemicals - Health Effects
- NSF 60A-2009 Drinking Water Treatment Chemicals - Health Effects
- NSF 60A-2014 Drinking Water Treatment Chemicals - Health Effects
- NSF 60-2015 Drinking Water Treatment Chemicals - Health Effects
- NSF 53A-2007 Drinking water treatment units - Health effects Printed 07-19-07
- NSF 600-2021 Health Effects Evaluation and Criteria for Chemicals in Drinking Water
- NSF 61E-2003 Drinking water system components - Health effects Printed 10/22/2003
- NSF 61A-2007 Drinking water system components Health effects Printed 07/31/07
- NSF 60E-2003 Drinking Water Treatment Chemicals - Health Effects Addendum 1.0: 12/17/2003; Printed 2/27/2004
Association Francaise de Normalisation, kettle effect
- NF EN ISO 4611:2011 Plastiques - Détermination des effets d'une exposition à la chaleur humide, au brouillard d'eau et au brouillard salin
- NF P41-036-4:2006 Influence of materials on water intended for human consumption - Influence due to migration - Part 4 : test method for water treatment membranes.
- NF P41-034-1*NF EN 14944-1:2006 Influence of cementitious products on water intended for human consumption - Test methods - Part 1 : influence of factory made cementitious products on organoleptic parameters
- NF P41-036-4*NF EN 12873-4:2021 Influence of materials on water intended for human consumption - Influence due to migration - Part 4 : test method for water treatment membranes
- NF EN 12873-4:2021 Influence des matériaux sur l'eau destinée à la consommation humaine - Influence due à la migration - Partie 4 : méthode d'essai des membranes des systèmes de traitement d'eau
- NF EN 14944-1:2006 Influence des produits à base de ciment sur l'eau destinée à la consommation humaine - Méthode d'essai - Partie 1 : influence des produits à base de ciment fabriqués en usine sur les paramètres organoleptiques
- FD CEN/TR 16364:2013 Influence des matériaux sur l'eau destinée à la consommation humaine - Influence de la migration - Utilisation de modèles mathématiques pour prévoir la migration depuis des matériaux organiques
- CWA 14247:2001 Water treatment membranes - Influence of materials on water intended for human consumption - Test method
- NF P41-036-2*NF EN 12873-2:2021 Influence of materials on water intended for human consumption - Influence due to migration - Part 2 : test method for non-metallic and noncementitious site-applied materials
- FD P41-255*FD CEN/TR 16364:2013 Influence of materials on water intended for human consumption - Influence due to migration - Prediction of migration from organic materials using mathematical modelling
- NF P41-036-3:2006 Influence of materials on water intended for human consumption - Influence due to migration - Part 3 : test method for ion exchange and adsorbent resins.
- NF T51-162*NF EN ISO 4611:2011 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist.
- NF ISO 18695:2008 Textiles - Détermination de la résistance à la pénétration de l'eau - Essai de pénétration par impact
- NF P41-290:2008 Effect of materials on the quality of water intented for human consumption - Cytotoxicity measurement method.
- NF P41-032*NF EN 16421:2015 Influence of materials on water for human consumption - Enhancement of microbial growth (EMG)
- NF EN 14360:2004 Vêtements de protection contre les intempéries - Méthode d'essai pour les vêtements prêt à porter - Impact de fortes précipitations
- NF ISO 26367-1:2019 Lignes directrices pour déterminer l'impact environnemental des effluents du feu - Partie 1 : généralités
- NF EN 16421:2015 Influence des matériaux sur l'eau destinée à la consommation humaine - Stimulation de la croissance microbienne (SCM)
- NF ISO 26367-2:2017 Lignes directrices pour déterminer l'impact environnemental des effluents du feu - Partie 2 : méthodologie pour compiler les données relatives aux émissions des feux ayant un impact significatif sur l'environnement
- NF P41-039*NF EN 15768:2015 Influence of materials on water intended for human consumption - GC-MS identification of water leachable organic substances
- NF EN 12873-2:2021 Influence des matériaux en contact sur l'eau destinée à la consommation humaine - Influence due à la migration - Partie 2 : méthode d'essai des matériaux appliqués sur site, excepté les matériaux métalliques et ceux à base de ciment
- NF EN 12873-3:2019 Influence des matériaux en contact sur l'eau destinée à la consommation humaine - Influence due à la migration - Partie 3 : méthode d'essai des résines adsorbantes et échangeuses d'ions
- NF P41-036-2:2005 Influence of materials on water intended for human consumption - Influence due to migration - Part 2 : test method for non-metallic and non-cementitious site-applied materials.
- NF P41-038:2006 Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method.
- NF P41-038*NF EN 14718:2015 Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method
- NF T90-308*NF EN ISO 20079:2006 Water quality - Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) - Duckweed growth inhibition test.
- NF EN 1420:2016 Influence des matériaux organiques sur l'eau destinée à la consommation humaine - Détermination de l'odeur et de la flaveur de l'eau dans les réseaux de conduites
- NF ISO 26367-3:2022 Lignes directrices pour déterminer l'impact environnemental des effluents du feu - Partie 3 : échantillonnage et analyse
- NF P41-040*NF EN 16056:2012 Influence of metallic materials on water intended for human consumption - Method to evaluate the passive behaviour of stainless steel
- NF P41-037-1*NF EN 14395-1:2004 Influence of organic materials on water intended for human consumption - Organoleptic assessment of water in storage systems - Part 1 : test method
- NF EN 14718:2015 Influence des matériaux organiques sur l'eau destinée à la consommation humaine - Détermination de la demande en chlore - Méthode d'essai
- NF EN 15768:2015 Influence sur l'eau des matériaux en contact avec l'eau destinée à la consommation humaine - Identification par CG-SM de substances organiques lixiviables à l'eau
- NF T90-347:1990 Testing water. Dispersive products. Evaluation in an aqueous medium of the inhibitory action on petroleum biodegradability.
- NF EN 13746:2004 Sols sportifs - Détermination des variations dimensionnelles dues aux effets de l'eau, du gel et de la chaleur
- NF P41-030:1999 Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Part 1 : test method.
- NF P41-030*NF EN 1420:2016 Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems
- NF U44-179*NF EN 15704:2009 Liming materials - Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
- NF P41-041*NF EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
- NF EN 16056:2012 Influence des matériaux métalliques sur l'eau destinée à la consommation humaine - Méthode d'évaluation du comportement passif des aciers inoxydables
- NF P90-120*NF EN 13746:2004 Surfaces for sports areas - Determination of dimensional changes due to the effect of varied water, frost and heat conditions
- NF EN 16057:2012 Influence des matériaux métalliques sur l'eau destinée à la consommation humaine - Dosage du plomb (Pb) résiduel de surface - Méthode d'extraction
- NF EN IEC 60695-5-1:2021 Essais relatifs aux risques du feu - Partie 5-1 : effets des dommages de corrosion des effluents du feu - Recommandations générales
- NF EN 14395-1:2004 Influence des matériaux organiques sur l'eau destinée à la concommation humaine - Évaluation organoleptique de l'eau dans les systèmes de stockage - Partie 1 : méthode d'essai
- NF EN 15664-2:2010 Influence des matériaux métalliques sur l'eau destinée à la consommation humaine - Banc d'essai dynamique pour l'évaluation du relargage de métaux - Partie 2 : eaux d'essai
International Organization for Standardization (ISO), kettle effect
- ISO 21650:2007 Actions from waves and currents on coastal structures
- ISO 4611:1980 Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist
- ISO 4611:2010 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist
- ISO 15522:1999 Water quality - Determination of the inhibitory effect of water constituents on the growth of activated sludge microorganisms
- ISO/DIS 24566-2:2023 Drinking water, wastewater and storm water systems and services — Adaptation of water services to climate change impacts — Part 2: Stormwater services
- ISO 26367-1:2019 Guidelines for assessing the adverse environmental impact of fire effluents — Part 1: General
- ISO 20079:2005 Water quality - Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) - Duckweed growth inhibition test
- ISO/CD 24566-2 Drinking water, wastewater and storm water systems and services — Adaptation of water services to climate change impacts — Part 2: Stormwater services
- ISO 6341:1996 Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test
- ISO 2551:1972 Title missing - Legacy paper document
- ISO 2551:1981 Machine-made textile floor coverings - Determination of dimensional changes due to the effects of varied water and heat conditions
- ISO 26367-3:2022 Guidelines for assessing the adverse environmental impact of fire effluents — Part 3: Sampling and analysis
- ISO/FDIS 24566-1 Drinking water, wastewater and storm water systems and services — Adaptation of water services to climate change impacts — Part 1: Assessment principles
- ISO 6341:1996/Cor 1:1998 Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test; Technical Corrigendum 1
- ISO 6341:2012 Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test
Sichuan Provincial Standard of the People's Republic of China, kettle effect
- DB51/T 2525-2018 Specification for assessment of impact on aquatic organisms of wading engineering
API - American Petroleum Institute, kettle effect
- API PUBL 4558-1995 Options for Minimizing Environmental Impacts of Freshwater Spill Response
- API DR26-1980 Assessment Guide for Refinery Wastewater Impoundment Impacts on Ground Water
- API REPORT 86/87-56-1988 Effects of External Hydrostatic Pressure on Tubular Beam-Columns
- API PUBL 4291-1977 Effects of Oilfield Brine Effluent on Benthic Organisms in Trinity Bay@ Texas
- API BULL D-4-1951 THE EFFECTS OF DRILLING-MUD ADDITIVES ON OIL-WELL CEMENTS
- API PUBL 4673-1999 Impacts of Petroleum Product Marketing Terminals on the Aquatic Environment
- API PUBL 948-1996 A STUDY OF VARIABLES THAT AFFECT THE CORROSION OF SOUR WATER STRIPPERS
- API PUBL 4472-1989 Fate and Effects of Produced Water Discharges in Nearshore Marine Waters
- API PUBL 4438-1986 Underwater Drilling - Measurement of Sound Levels and Their Effects on Belukha Whales
- API PUBL 4297-1978 Fate and Effects of Polynuclear Aromatic Hydrocarbons in the Aquatic Environment
- API SOURCES CHEMISTRY-1981 The Sources@ Chemistry@ Fate@ and Effects of Chromium in Aquatic Environments
- API BULL D-4-1963 EFFECTS OF DRILLING-MUD ADDITIVES ON OIL-WELL CEMENTS (WITHDRAWN)
- API PUBL 4633-1995 Barium in Produced Water: Fate and Effects in the Marine Environment
- API PUBL 4675-1999 Fate and Environmental Effects of Oil Spills in Freshwater Environments
- API PUBL 4411-1985 Effect of Prudhoe Bay Crude Oil on the Homing of Coho Salmon in Marine Waters
- API PUBL 4480-1989 Fate and Effects of Drilling Fluid and Cutting Discharges in Shallow@ Nearshore Waters
- API PUBL 4517-1991 Produced Water Impacts on Louisiana Wetlands (Errata - 1991)
- API REPORT 4370-1983 EFFECTS OF OFFSHORE PETROLEUM OPERATIONS ON COLD WATER MARINE MAMMALS
- API REPORT 93-77- Influence of Cathodic Protection on the Fatigue Life of Welded Connections in Seawater
- API PUBL 4472-1988 Fate and Effects of Produced Water Discharges in Nearshore Marine Waters - Final Report
- API PUBL 4758-2006 Strategies for Addressing Salt Impacts of Produced Water Releases to Plants@ Soil@ and Groundwater
- API PUBL 4443-1986 Effect of Suspended Solids on Bioavailability of Petroleum Refinery Effluent Chemicals
- API HF3-2011 Practices for Mitigating Surface Impacts Associated with Hydraulic Fracturing (First Edition)
- API PUBL 4761-2011 API Groundwater Arsenic Manual Attenuation of Naturally-Occurring Arsenic at Petroleum Impacted Sites
- API 4182-1973 EFFECTS OF OXIDANT LEVELS ON SELECTED HEALTH CHARACTERISTICS OF PERSONS IN THE LOS ANGELES BASIN
- API PUBL 4446-1986 Influence of Crude Oil and Dispersant on the Ability of Coho Salmon to Differentiate Home Water From Non-Home Water (Withdrawn)
- API TR 17TR11-2015 Pressure Effects on Subsea Hardware During Flowline Pressure Testing in Deep Water (FIRST EDITION)
- API REPORT 12-1980 Influence of Sea Water and Cathodic Protection upon Fatigue of Welded Steel Plates@ as Applicable to Offshore Structures
- API REPORT 79-12-1981 Influence of Sea Water and Cathodic Protection upon Fatigue of Welded Steel Plates as Applicable to Offshore Structures
- API PUBL 4514-1992 Review of Natural Resource Damage Assessments in Freshwater Environments Task 2 - Effects of Oil Releases into Freshwater Habitats
- API PUBL 4485-1989 Effects of Offshore Petroleum Operations on Cold Water Marine Mammals: A Literature Review (Replaces PUBL 4370)
- API PUBL 4691-1999 Fate of Spilled Oil in Marine Waters: Where Does It Go? What Does It Do? How Do Dispersants Affect It?
Professional Standard - Water Conservancy, kettle effect
- SL 520-2014 Guidelines on compilation of flood impact assessment reports
- SL 422-2008 General impact evaluation standard for water tourism project
- SL/Z 705-2015 Guidelines for post environmental impact assessment of water project
- SL 315-2005 Environmental impact assessment code hydroelectric station project for rural area
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., kettle effect
- ASHRAE 4832-2006 Environmental Impacts of Surface Water Heat Pump Systems
- ASHRAE HI-02-2-2-2002 The Impact of Desiccant Dehumidification on Classroom Humidity Levels
- ASHRAE HI-02-2-3-2002 The Impact of Desiccant Dehumidification on Classroom Humidity Levels
- ASHRAE 4520-2002 Factors Affecting the Freezing of Water Flowing Inside a Circular Tube
- ASHRAE OR-16-C058-2016 The Impact of a Heat Pump Water Heater on the Energy Consumption of a Single Detached House
- ASHRAE SA-96-12-3-1996 Effect of Variable Flow on Centrifugal Chiller Performance
- ASHRAE CH-99-4-4-1999 Impact of HVAC Control Improvements on Supermarket humidity Levels
- ASHRAE 4362-2000 Effect of Heating Boundary Conditions on Pool Boiling Experiments (The Full Text of This Paper Can Be Found in the International Journal of Heating@ Ventilating@ Air-Conditioning and Refrigerating Research@ Volume 5@ Number 4@ October 1999@ pp. 283-296)
- ASHRAE NA-04-5-2-2004 "Measured Performance and Impacts of ""Drop-In"" Residential Heat Pump Water Heaters"
- ASHRAE 4195-1998 Effect of Underground Water Attack on the Performance of Mineral Wool Pipe Insulation (RP-721)
- ASHRAE AT-96-18-3-1996 Effect of Seasonal Changes in Use Patterns and Cold Inlet Water Temperature on Water-Heating Loads
- ASHRAE OR-05-6-3-2005 Adverse Effects of Moderate Levels of Low Frequency Noise in the Occupational Environment
- ASHRAE 4567-2002 A Water Tank Experiment on the Influence of Occupants' Natural Convection on Ventilation Efficiency
- ASHRAE 4365-2000 Preliminary Assessment of the Effects of Groundwater Flow on Closed-Loop Ground-Source Heat Pump Systems
- ASHRAE 4074-1997 Impacts of Static Pressure Set Level on HVAC Energy Consumption and Indoor Conditions
- ASHRAE LV-11-C013-2011 Energy Efficiency Design Options for Residential Water Heaters: Economic Impacts on Consumers
- ASHRAE 4330-2000 Experimental Investigation of the Effect of Hydrophobicity on the Rate of Frost Growth in Laminar Channel Flows
- ASHRAE 4740-2004 Wind Effects on Performance of Static Smoke Exhaust Systems: Horizontal Ceiling Vents
- ASHRAE 3848-1995 Analysis of the Effect of Induced Groundwater Flow on Heat Transfer from a Vertical Open-Hole Concentric-Tube Thermal Well
- ASHRAE 4128-1998 Investigation of the Potential Effect of Zeotropic Refrigerant Mixture on Performance of a Hot Water Heat Pump
- ASHRAE 4311-1999 Sink Characteristics of a Full-Scale Environmental Chamber and Their Impact on Material Emission Testing
- ASHRAE SA-96-11-1-1996 Modeling the Influence of Building and HVAC System Parameters on Radon Levels in a Large Building
- ASHRAE 3978-1996 Effect of Ozone on Corrosion of Carbon Steel and Copper in the Presence of HEDP and TTA in Cooling Water (RP-748)
- ASHRAE MN-00-5-1-2000 Implications of the Measured Performance of Variable Flow Pumping Systems in Geothermal and Water Loop Heat Pump Applications
- ASHRAE 4360-2000 Thermal Conductivity of Cementitious Grouts and Impact on Heat Exchanger Length Design for Ground Source Heat Pumps (The Full Text of This Paper Can Be Found in the International Journal of Heating@ Ventilating@ Air-Conditioning and Refrigerating Research
- ASHRAE 4009-1996 Effect of R-123 Condensate Inundation and Vapor Shear on Enhanced Tube Geometrics (RP-676)
US-FCR, kettle effect
国家能源局, kettle effect
- NB/T 10347-2019 Specifications for Environmental Impact Assessment of Hydropower Projects
- NB/T 10608-2021 Technical specifications for economic profit and loss analysis of environmental impact of hydropower projects
- NB/T 10116-2018 Recommended practices for reducing the environmental impact of hydraulic fracturing operations on the ground
水利部, kettle effect
- SL/T 520-2014 Guidelines for Preparing Flood Impact Assessment Reports
- SL/T 710-2015 Guidelines for survey methods for hydrology affected by engineering projects
European Committee for Standardization (CEN), kettle effect
- EN 12873-4:2006 Influence of materials on water intended for human consumption - Influence due to migration - Part 4: Test method for water treatment membranes
- EN 14944-1:2006 Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters
- prEN 14944-1-2021 Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters
- EN 14944-1:2023 Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters
- EN ISO 4611:1999 Plastics - Determination of the Effects of Exposure to Damp Heat, Water Spray and Salt Mist ISO 4611:1987
- EN ISO 4611:2010 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
- PD CEN/TR 16364:2012 Influence of materials on water intended for human consumption - Influence due to migration - Prediction of migration from organic materials using mathematical modelling
- EN 12873-1:2003 Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for nonmetallic and non-cementitious factory made products
- FprEN 12873-2-2021 Influence of materials on water intended for human consumption - Influence due to migration - Part 2: Test method for non-metallic and noncementitious site-applied materials
- EN 12873-3:2006 Influence of materials on water intended for human consumption - Influence due to migration - Part 3: Test method for ion exchange and adsorbent resins
- EN 15768:2015 Influence of materials on water intended for human consumption - GC-MS identification of water leachable organic substances
- EN 14718:2014 Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method
- EN 16421:2014 Influence of materials on water for human consumption - Enhancement of microbial growth (EMG)
- EN ISO 20079:2006 Water quality - Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) - Duckweed growth inhibition test (ISO 20079:2005)
- EN 12873-2:2005 Influence of materials on water intended for human consumption - Influence due to migration - Part 2: Test method for non-metallic and non-cementitious site-applied materials
- EN 14395-1:2004 Influence of organic materials on water intended for human consumption - Organoleptic assessment of water in storage systems - Part 1: Test method
- EN 1420:2016 Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems
- EN 16056:2012 Influence of metallic materials on water intended for human consumption - Method to evaluate the passive behaviour of stainless steels
- EN 1420-1:1999 Influence of Organic Materials on Water Intended for Human Consumption - Determination of Odour and Flavour Assessment of Water in Piping Systems - Part 1: Test Method
- EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
- EN 14718:2006 Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method
- EN ISO 11348-2:2008 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria (ISO 11348-2:2007)
- EN 14944-3:2007 Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementititous products
ES-UNE, kettle effect
- UNE-EN 12873-4:2022 Influence of materials on water intended for human consumption - Influence due to migration - Part 4: Test method for water treatment membranes
- UNE-EN 12873-2:2022 Influence of materials on water intended for human consumption - Influence due to migration - Part 2: Test method for non-metallic and noncementitious site-applied materials
- UNE-EN 12873-3:2020 Influence of materials on water intended for human consumption - Influence due to migration - Part 3: Test method for ion exchange and adsorbent resins
- UNE-EN 1420:2016 Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems
- UNE-EN IEC 60695-5-1:2022 Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance
Professional Standard - Environmental Protection, kettle effect
- HJ/T 88-2003 Code for environmental impact assessment of water conservancy and hydropower project
- HJ 610-2011 Technical guidelines for environmental impact assessment
-Groundwater environment
- HJ/T 2.3-1993 Technical gnidelines for environmental impact assessment Surfacewater environment
- HJ 2.3-2018 Technical guidelines for environmental impact assessment surface water environment
- HJ 610-2016 Environmental Impact Assessment Technical Guidelines Groundwater Environment
Professional Standard - Hydroelectric Power, kettle effect
- SDJ 302-1988 Code for environmental impact evaluation of water resources and hydropower projects (Trial Implementation)
Group Standards of the People's Republic of China, kettle effect
- T/CHES 82-2022
- T/ZHCA 003-2018 Method for assessment of cosmetics on transepidermal water loss
- T/CEC 475-2021 Technical specification for environmental impact assessment of seawater pumped storage power station project
- T/CNS 12-2019 Environmentally assisted fatigue model of metallic materials used in pressurized water reactor nuclear power plants
- T/CNCA 030-2022
SE-SIS, kettle effect
- SIS SS-ISO 175:1987 Plastics - Determ i nation of the effects of liquid chemicals, including water
- SIS SS 27 02 32-1984 Building boards - Determination of water, frost and heat influence on thickness and strength
(U.S.) Plastic Pipe Association, kettle effect
- PPI TR-34-2007 Effects of Disinfection on Newly Constructed Polyethylene Water Mains
Natural Gas Processor's Association (NGPA), kettle effect
- GPA RR-74-1984 Influence of Methanol on Hydrate Formation at Low Temperatures
- GPA TP-20-1996 Effect of Ammonia on LP-Gas Odorant
- GPA RR-34-1978 Sour Water Equilibria: Ammonia Volatility down to ppm Levels Effect of Electrolytes on Ammonia Volatility pH vs. Composition
- GPA RR-106-1987 Influence of High Concentrations of Methanol on Hydrate Formation and the Distribution of Glycol in Liquid-Liquid Mixtures
AT-ON, kettle effect
- OENORM EN 14944-1-2021 Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters
Professional Standard - Energy, kettle effect
- NB/T 35068-2015 Code for environmental impact assessment of river hydropower planning
- NB/T 35059-2015 Code for post assessment of environmental impacts of river hydropower development
- NB/T 10140-2019 Technical specification for post-evaluation of hydropower project environmental impact
- NB/T 10129-2019 Regulations for compiling special report on address of reservoir affected area of hydropower project
- NB/T 20299-2014 Technical specification in assessing the environmental impact of thermal discharge for nuclear power plants
- NB/T 20604-2021 Technical specification for assessment of radiation impact on aquatic organisms under operating state of nuclear power plant
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, kettle effect
- GB/T 16124-1995 Technical specifications for medical assessment of environmental impact on water conservancy and hydroelectric projects
- GB/T 22413-2008 Technical guidelines for environmental impact assessment of seawater multi-purpose utilization engineering
- GB/T 12000-2003 Determination of the effects of exposure to damp heat,water spray and salt mist for plastics
- GB/T 42111-2022 Low impact development stormwater management and harvest—Specification for facility operation and maintenance
- GB/T 18522.5-2002 General specification for hydrometric instruments--Part 5: The operating condition's influences and test method
CEN - European Committee for Standardization, kettle effect
- PREN 14944-1-2015 Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of migration from factory made cementitious products on the organoleptic parameters
- EN 12873-3:2019 Influence of materials on water intended for human consumption - Influence due to migration - Part 3: Test method for ion exchange and adsorbent resins
- PREN 12873-3-2017 Influence of materials on water intended for human consumption - Influence due to migration - Part 3: Test method for ion exchange and adsorbent resins
- PREN 14944-3-2015 Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products
Indonesia Standards, kettle effect
NO-SN, kettle effect
- NS 9410-2007 Environmental monitoring of benthic impact from marine fish farms
- NS 9410-2007/AC-2008 Corrigendum AC Environmental monitoring of benthic impact from marine fish farms
U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), kettle effect
- ARI GUIDELINE L-1997 Assessing the Impact of Air-Conditioning Outdoor Sound Levels in the Residential Community
国家市场监督管理总局、中国国家标准化管理委员会, kettle effect
- GB/T 38906-2020 Low impact development stormwater management and harvest—Facility classification
- GB/T 39599-2020 Low impact development stormwater management and harvest—Basic terminology
ANS - American Nuclear Society, kettle effect
- 56.11-1988 Design Criteria for Protection Against the Effects of Compartment Flooding in Light Water Reactor Plants
- 58.2-1980 DESIGN BASIS FOR PROTECTION OF LIGHT WATER NUCLEAR POWER PLANTS AGAINST EFFECTS OF POSTULATED PIPE RUPTURE
- 58.2-1988 Design Basis for Protection of Light Water Nuclear Power Plants Against Effects of Postulated Pipe Rupture
Shandong Provincial Standard of the People's Republic of China, kettle effect
- DB37/T 3704-2019 Technical specifications for flood control and water delivery impact assessment of water-related construction projects
ZA-SANS, kettle effect
- SANS 5835:2006 Estimation of the effect of fine aggregate on the water requirement of concrete
- SANS 2551:1981 Machine-made textile floor coverings - Determination of dimensional changes due to the effects of varied water and heat conditions
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), kettle effect
中国气象局, kettle effect
- QX/T 549-2022 Ecosystem water conservation function meteorological impact index
Professional Standard - Ocean, kettle effect
- HY/T 129-2010 Evaluation method for water quality impact of seawater comprehensive utilization project wastewater discharge into sea area
- HY/T 0341-2022 Guidelines for the Assessment of the Impacts of Anthropogenic Underwater Noise on Marine Life
Guizhou Provincial Standard of the People's Republic of China, kettle effect
- DB52/T 1185-2017 Specifications for post-environmental impact assessment of water conservancy and hydropower construction projects in Guizhou Province
American Society for Testing and Materials (ASTM), kettle effect
- ASTM D4867/D4867M-96 Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
- ASTM D4867/D4867M-22 Standard Test Method for Effect of Moisture on Asphalt Mixtures
- ASTM D3625/D3625M-20 Standard Practice for Effect of Water on Asphalt-Coated Aggregate Using Boiling Water
- ASTM D3625-96(2005) Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
- ASTM D3625/D3625M-12 Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
- ASTM D6532-00(2022) Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens
- ASTM D5860-95(2007) Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
- ASTM D5860-95 Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
- ASTM D5860-95(2002) Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
- ASTM D6284-09 Standard Test Method for Rubber Property8212;Effect of Aqueous Solutions with Available Chlorine and Chloramine
- ASTM E3312-21 Standard Guide for Mitigation of Wildfire Impact to Source Water Protection Areas and Risk to Water Utilities
- ASTM D3625-96(2001) Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
- ASTM D4082-95 Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power Plants
- ASTM D4082-89 Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power Plants
- ASTM D4082-02 Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power Plants
- ASTM D5860-95(2022) Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
- ASTM D1075-96(2000) Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
- ASTM D1075-96(2005) Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
- ASTM D1075-11 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
- ASTM D1075-07 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
- ASTM D6284-02 Standard Test Method for Rubber Property8212;Effect of Aqueous Solutions with Available Chlorine and Chloramine
- ASTM D6284-17(2023) Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
- ASTM D4867/D4867M-04 Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
- ASTM D6284-17 Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
- ASTM D6104-97(2017)e1 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
- ASTM D610-08(2019) Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
IN-BIS, kettle effect
Shaanxi Provincial Standard of the People's Republic of China, kettle effect
- DB61/T 1362-2020 Sponge City Low Impact Development Stormwater System Technical Specifications
- DB61/T 1363-2020 Specifications for construction and acceptance of stormwater engineering for low-impact development of sponge city
National Fire Protection Association (NFPA), kettle effect
National Aeronautics and Space Administration (NASA), kettle effect
- NASA NACA-RM-L51B13-1951 The effect of end plates, end struts, and depth of submergence on the characteristics of a hydrofoil
- NASA-TM-X-72695-1975 The effect of chine tires on nose gear water-spray characteristics of a twin engine airplane
Illuminating Engineering Society of North America, kettle effect
- IESNA TM-12-2012 Spectral Effects of Lighting on Visual Performance at Mesopic Lighting Levels
- IESNA TM-12-06-2006 Spectral Effects of Lighting on Visual Performance at Mesopic Light Levels
AASHTO - American Association of State Highway and Transportation Officials, kettle effect
- HDG CHAPTER 10-2007 EVALUATING HIGHWAY EFFECTS ON SURFACE WATER ENVIRONMENTS (4th edition)
- HDG VOL X-1999 AASHTO Guidelines for Evaluating Highway Effects on Surface Water Environments (3rd edition)
- HDG VOL X-1992 AASHTO Guidelines for Evaluating Highway Effects on Surface Water Environments (2nd edition)
- T165-1997 Standard Specification for Effect of Water on Cohesion of Compacted Bituminous Mixtures (Nineteenth Edition; ASTM D1075-94)
- T165-1991 Standard Specification for Effect of Water on Cohesion of Compacted Bituminous Mixtures (Eighteenth Edition; ASTM D1075-94)
Liaoning Provincial Standard of the People's Republic of China, kettle effect
- DB21/T 2404-2015 Technical Regulations for Monitoring and Evaluation of Oil Spill Impacts in Mariculture Areas
- DB21/T 2977-2018 Low-impact development urban rainwater harvesting and utilization engineering technical regulations
Taiwan Provincial Standard of the People's Republic of China, kettle effect
- CNS 12391-1988 Method of Test for Effect of Water on Bituminous-Coated Aggregate Qiocl Field
- CNS 11153-1984 Method of Test for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
ESDU - Engineering Sciences Data Unit, kettle effect
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, kettle effect
- GB/T 12000-2017 Plastics—Determination of the effects of exposure to damp heat,water spray and salt mist
PL-PKN, kettle effect
- PN B06242-1990 Admixtures for concrete Admixtures waterpoofing Requirements and testing at influence for concrete
- PN C04403-05-1989 Pigments tor water paints and mortars Test methods Determination of the influence of pigment upon the time of cement setting
The American Road & Transportation Builders Association, kettle effect
- AASHTO T 165-2002 Standard Method of Test for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
American Welding Society (AWS), kettle effect
- WRC 487:2003 PVRC'S Position on Environmental Effects on Fatigue Life in LWR Applications
RU-GOST R, kettle effect
- GOST 14340.8-1969 Enamelled round winding wires. Method of the solvent-, oil- and water resistance test
- GOST R 53613-2009 Classification overall performance of influence of environmental conditions appearing in nature on the technical products. Precipitation and wind
Association of German Mechanical Engineers, kettle effect
- VDI 3784 Blatt 1-1986 Dispersion of natural-draft; wet cooling tower emissions; assessment of cooling tower impact
GB-REG, kettle effect
- REG 33 CFR PART 322-2011 PERMITS FOR STRUCTURES OR WORK IN OR AFFECTING NAVIGABLE WATERS OF THE UNITED STATES
- REG NACA-TR-675-1939 Effects of elevator nose shape, gap, balance, and tabs on the aerodynamic characteristics of a horizontal tail surface
Society of Motion Picture and Television Engineers (SMPTE), kettle effect
- SMPTE RP 200-2002 Relative and Absolute Sound Pressure Levels for Motion-Picture Multichannel Sound Systems - Applicable for Analog Photographic Film Audio, Digital Photographic Film Audio and D-Cinema
SG-SPRING SG1, kettle effect
- SS 375-2-5-2015 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Part 2:5: Methods of test -The extraction of substances that may be of concern to public health
- SS 375-1-2015 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Part 1: Speccification
FI-SFS, kettle effect
Guangxi Provincial Standard of the People's Republic of China, kettle effect
- DB45/T 2151-2020 Regulations for hydrological observation and analysis of waterways affected by hub operation in mountainous rivers
ACI - American Concrete Institute, kettle effect
- ACI 364.16T-2018 Physical Properties and Characteristics Affecting the Sensitivity to Cracking of Cementitious Repair Materials
TR-TSE, kettle effect
- TS 3128-1978 Design And Construction Methods For Protection Of Buildings Against Water From The Ground
Professional Standard - Nuclear Industry, kettle effect
- EJ/T 1111-2000 Test method for effects of gamma radiation on coatings for use in Pressurized water reactor nuclear power plants
KR-KS, kettle effect
- KS M ISO TR 15235-2021 Preparation of steel substrates before application of paints and related products — Collected information on the effect of levels of water-soluble salt contamination
Institute of Electrical and Electronics Engineers (IEEE), kettle effect
- IEEE Std C95.1-1991 Safety levels with respect to human exposure to radio frequency electromagnetic fields, 3 kHZ to 300 GHz
WRC - Welding Research Council, kettle effect
- BULLETIN 399-1995 THE INFLUENCE OF CONSUMABLE COMPOSITION AND SOLIDIFICATION ON INCLUSION FORMATION AND GROWTH IN LOW CARBON STEEL UNDERWATER WET WELDS