valve requirements

valve requirements, Total:500 items.

In the international standard classification, valve requirements involves: Valves, Protection against fire, Installations in buildings, Burners. Boilers, Construction materials, Equipment for petroleum and natural gas industries, Nuclear energy engineering, Surface treatment and coating, Radiation protection, Fluid storage devices, Heat pumps, Galvanic cells and batteries, Road vehicle systems, Internal combustion engines for road vehicles, Refrigerating technology, Rubber and plastics products, Energy and heat transfer engineering in general, Electronic tubes, Building accessories, External water conveyance systems, Petroleum, petroleum products and natural gas handling equipment, Agricultural machines, implements and equipment.

YU-JUS, valve requirements

JUS M.C5.035-1992 Valves - Metallic ball valves - General requires

European Committee for Standardization (CEN), valve requirements

EN 12266-2:2012 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
EN 1567:1999 Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests
prEN 1491-2021 Building valves - Expansion valves - Tests and requirements
EN 1491:2022 Building valves - Expansion valves - Tests and requirements
EN 15092:2008 Building valves - Inline hot water supply tempering valves - Tests and requirements
EN 1489:2000 Building valves - Pressure safety valves - Tests and requirements
EN ISO 10497:2022 Testing of valves - Fire type-testing requirements (ISO 10497:2022)
EN ISO 10497:2010 Testing of valves - Fire type-testing requirements (ISO 10497:2010)
EN 15714-3:2009 Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
EN 15714-4:2009 Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements
EN 1490:2000 Building valves - Combined temperature and pressure relief valves - Tests and requirements
EN 1491:2000 Building valves - Expansion valves - Tests and requirements
EN 16668:2016 Industrial valves - Requirements and testing for metallic valves as pressure accessories (Incorporates Amendment A1: 2018)
EN 1074-4:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves
EN 1074-5:2001 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves
EN 15714-2:2009 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
EN 12266-2:2002 Industrial Valves - Testing of Valves Part 2: Tests, Test Procedures and Acceptance Criteria Supplementary Requirements
prEN 15714-5-2021 Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements
prEN 15714-6-2021 Industrial valves - Actuators - Part 6: Hydraulic linear actuators for industrial valves - Basic requirements
EN 1488:2000 Building valves - Expansion groups - Tests and requirements
EN 1488:2021 Building valves - Expansion groups - Tests and requirements
EN 12266-1:2003 Industrial valves Testing of valves Part 1: Pressure tests, test procedures and acceptance criteria Mandatory requirements
EN ISO 22153:2021 Electric actuators for industrial valves - General requirements (ISO 22153:2020)
EN 1487:2000 Building Valves - Hydraulic Safety Groups - Tests and Requirements
EN 1487:2014 Building valves - Hydraulic safety groups - Tests and requirements
prEN 15714-3-2021 Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
EN 12266-1:2012 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
EN ISO 21922:2021 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking (ISO 21922:2021)
EN ISO 10497:2004 Testing of valves - Fire type-testing requirements ISO 10497:2004
prEN ISO 10497:2021 Testing of valves - Fire type-testing requirements (ISO/DIS 10497:2021)
EN 13126-1:2011 Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware
EN 1074-3:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves
EN 1213:1999 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements

TH-TISI, valve requirements

TIS 2194-2005 Testing of valves.fire type.testing requirements

Association Francaise de Normalisation, valve requirements

NF E29-315*NF EN ISO 10497:2010 Testing of valves - Fire type-testing requirements
NF P43-040*NF EN 15092:2008 Building valves - Inline hot water supply tempering valves - Tests and requirements
NF D36-405*NF EN 1491:2000 Building valves - Expansion valves - Tests and requirements
NF E29-317*NF EN 12569:2020 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
NF E29-322:2016 Industrial valves - Requirements and testing for metallic valves as pressure accessories
NF E29-322/IN1*NF EN 16668/IN1:2018 Industrial valves - Requirements and testing for metallic valves as pressure accessories
NF E29-322*NF EN 16668+A1:2018 Industrial valves - Requirements and testing for metallic valves as pressure accessories
NF EN 16668+A1:2018 Industrial valves - Requirements and tests for metal valves used as pressure accessories
NF EN 16668/IN1:2018 Industrial valves - Requirements and tests for metal valves used as pressure accessories
NF D36-402:2000 Building valves - Expansion groups - Tests and requirements.
NF D36-402*NF EN 1488:2021 Building valves - Expansion groups - Tests and requirements
NF EN ISO 10497:2022 Testing of valves - Fire test requirements
NF E29-338:2022 Industrial valves - Minimum performance requirements
NF E29-317:1999 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests.
NF EN 12569:2020 Industrial valves - Valves intended for processes in the chemical and petrochemical industry - Requirements and tests
NF D36-403*NF EN 1489:2000 Building valves - Pressure safety valves - Tests and requirements.
NF D36-401:2000 Building valves - Hydraulic safety groups - Tests and requirements.
NF D36-401*NF EN 1487:2014 Building valves - Hydraulic safety groups - Tests and requirements
NF E29-403-2:2009 Industrial valves - Actuators - Part 2 : electric actuators for industrial valves - Basic requirements.
NF P43-035*NF EN 1567:2000 Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests.
NF E29-316-5*NF EN 1074-5:2001 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5 : control valves
NF EN ISO 22153:2021 Actionneurs électriques pour robinetterie industrielle - Exigences générales
NF E29-316-4*NF EN 1074-4:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4 : air valves
NF E29-403-3*NF EN 15714-3:2009 Industrial valves - Actuators - Part 3 : pneumatic part-turn actuators for industrial valves - Basic requirements
NF E29-403-4*NF EN 15714-4:2009 Industrial valves - Actuators - Part 4 : hydraulic part-turn actuators for industrial valves - Basic requirements
NF EN 15714-3:2022 Industrial valves - Actuators - Part 3: part-turn pneumatic actuators for industrial valves - Basic requirements
NF EN 15714-4:2009 Industrial valves - Actuators - Part 4: part-turn hydraulic actuators for industrial valves - Basic requirements
NF E29-400*NF EN ISO 22153:2021 Electric actuators for industrial valves - General requirements
NF D36-404*NF EN 1490:2000 Building valves - Combined temperature and pressure relief valves - Tests and requirements.
NF EN 12266-2:2012 Industrial valves - Testing of metal valves - Part 2: tests, test procedures and acceptance criteria - Additional requirements
NF EN 1074-4:2000 Robinetterie pour l'alimentation en eau - Prescriptions d'aptitude à l'emploi et vérifications s'y rapportant - Partie 4 : purgeurs et ventouses à flotteur
NF P43-000:2003 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements - National complement
NF EN 1074-2/A1:2004 Water supply valves - Suitability for use requirements and related checks - Part 2: shut-off valves
NF EN 1074-3:2000 Water supply fittings - Requirements for suitability for use and related checks - Part 3: non-return valves
NF EN 1074-2:2000 Water supply valves - Suitability for use requirements and related checks - Part 2: shut-off valves
NF E35-408*NF EN ISO 21922:2021 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
NF EN 12266-1:2012 Industrial valves - Testing of metal valves - Part 1: pressure tests, test procedures and acceptance criteria - Mandatory requirements
NF E29-316-2/A1*NF EN 1074-2/A1:2004 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2 : isolating valves

International Organization for Standardization (ISO), valve requirements

ISO 10497:2004 Testing of valves - Fire type-testing requirements
ISO 10497:1992 Testing of valves; fire type-testing requirements
ISO 10497:2010 Testing of valves - Fire type-testing requirements
ISO 10497:2022 Testing of valves — Fire type-testing requirements
ISO 22153:2020 Electric actuators for industrial valves — General requirements
ISO 21922:2021 Refrigerating systems and heat pumps — Valves — Requirements, testing and marking
ISO 7714:1985 Irrigation equipment; Volumetric valves; General requirements and test methods

British Standards Institution (BSI), valve requirements

BS EN 1491:2000 Building valves - Expansion valves - Tests and requirements
BS EN 1491:2022 Building valves. Expansion valves. Tests and requirements
BS EN 1489:2000 Building valves - Pressure safety valves - Tests and requirements
BS EN 15714-3:2009 Industrial valves - Actuators - Pneumatic part-turn actuators for industrial valves - Basic requirements
BS EN 15714-4:2009 Industrial valves - Actuators - Hydraulic part-turn actuators for industrial valves - Basic requirements
BS EN 15092:2008 Building valves - Inline hot water supply tempering valves - Tests and requirements
BS EN 16668:2016+A1:2018 Industrial valves. Requirements and testing for metallic valves as pressure accessories
21/30430852 DC BS EN 1491. Building valves. Expansion valves. Tests and requirements
BS EN ISO 10497:2004 Testing of valves - Fire type-testing requirements
BS EN ISO 10497:2010 Testing of valves - Fire type-testing requirements
BS EN 12569:1999 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
BS EN 12569:2020 Industrial valves. Valves for chemical and petrochemical process industry. Requirements and tests
BS EN 1490:2000 Building valves - Combined temperature and pressure relief valves - Tests and requirements
BS EN 15714-2:2009 Industrial valves - Actuators - Electric actuators for industrial valves - Basic requirements
BS EN 12266-2:2002 Industrial valves - Testing of valves - Tests, test procedures and acceptance criteria - Supplementary requirements
22/30442367 DC BS EN 16668. Industrial valves. Requirements and testing for metallic valves as pressure accessories
BS EN 1567:1999 Building valves - Water pressure reducing valves and combination water reducing valves - Requirements and tests
BS EN 1567:2000 Building valves. Water pressure reducing valves and combination water reducing valves. Requirements and tests
BS EN 12266-2:2012 Industrial valves. Testing of metallic valves. Tests, test procedures and acceptance criteria. Supplementary requirements
BS EN 15714-6:2022 Industrial valves. Actuators - Hydraulic linear actuators for industrial valves. Basic requirements
BS EN 15714-5:2022 Industrial valves. Actuators - Pneumatic linear actuators for industrial valves. Basic requirements
BS EN 1074-5:2001 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Control valves
BS EN ISO 10497:2022 Testing of valves. Fire type-testing requirements
BS EN 1488:2021 Building valves. Expansion groups. Tests and requirements
BS EN 12266-1:2003 Industrial valves. Testing of valves. Pressure tests, test procedures and acceptance criteria. Mandatory requirements
BS EN 12266-1:2012 Industrial valves. Testing of metallic valves. Pressure tests, test procedures and acceptance criteria. Mandatory requirements
19/30380985 DC BS EN 12569. Industrial valves. Valves for chemical and petrochemical process industry. Requirements and tests
BS EN 15714-3:2022 Industrial valves. Actuators. Pneumatic part-turn actuators for industrial valves. Basic requirements
BS EN 1488:2000 Building valves - Expansion groups - Tests and requirements
16/30348709 DC BS EN 17070. Industrial valves. Minimum performance requirements
BS EN 1487:2000 Building valves - Hydraulic safety groups - Tests and requirements
BS EN 1487:2014 Building valves. Hydraulic safety groups. Tests and requirements
20/30407983 DC BS EN 1488. Building valves. Expansion groups. Tests and requirements
19/30392545 DC BS EN 15714-5. Industrial valves. Actuators - Part 5. Pneumatic linear actuators for industrial valves. Basic requirements
21/30438138 DC BS EN 15714-5. Industrial valves. Actuators. Part 5. Pneumatic linear actuators for industrial valves. Basic requirements
21/30433975 DC BS EN 15714-6. Industrial valves. Actuators. Part 6. Hydraulic linear actuators for industrial valves. Basic requirements
BS EN 60896-22:2005 Stationary lead-acid batteries - Valve regulated types - Requirements
BS EN 60896-22:2004 Stationary lead-acid batteries - Valve regulated types - Requirements
BS EN ISO 22153:2021 Electric actuators for industrial valves. General requirements
21/30402748 DC BS EN ISO 10497. Testing of valves. Fire type-testing requirements
18/30364158 DC BS ISO 22153. Electric actuators for industrial valves. General requirements
BS EN ISO 21922:2021 Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
21/30433978 DC BS EN 15714-3. Industrial valves. Actuators. Part 3. Pneumatic part-turn actuators for industrial valves. Basic requirements
BS EN 1074-2:2000(2004) Valves for water supply — Fitness for purpose requirements and appropriate verification tests — Part 2 : Isolating valves
BS EN 12284:2003 Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
BS EN 14141:2003 Valves for natural gas transportation in pipelines. Performance requirements and tests
BS EN 14141:2013 Valves for natural gas transportation in pipelines. Performance requirements and tests
BS EN 1074-2:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Isolating valves
BS EN 1074-3:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Check valves
BS 6755-1:1986(1998) Testing of valves — Part 1 : Specification for production pressure testing requirements
BS 6755-2:1987(1998) Testing of valves — Part 2 : Specification for fire type - testing requirements

German Institute for Standardization, valve requirements

DIN EN 1491:2000 Building valves - Expansions valves - Tests and requirements; German version EN 1491:2000
DIN EN 1489:2000 Building valves - Pressure safety valves - Tests and requirements; German version EN 1489:2000
DIN EN 1491:2021 Building valves - Expansion valves - Tests and requirements; German and English version prEN 1491:2021
DIN EN 1491:2022 Building valves - Expansion valves - Tests and requirements
DIN EN 1491:2022-09 Building valves - Expansion valves - Tests and requirements; German version EN 1491:2022
DIN EN 15092:2008 Building valves - Inline hot water supply tempering valves - Tests and requirements; English version of DIN EN 15092:2008-09
DIN EN 1489:2000-06 Building valves - Pressure safety valves - Tests and requirements; German version EN 1489:2000
DIN EN 16668:2022 Industrial valves - Requirements and testing for metallic valves as pressure accessories; German and English version prEN 16668:2022
DIN EN 12569:2001 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests (includes Corrigendum AC:2000); German version EN 12569:1999 + AC:2000
DIN 3230-4:1977 Technical Conditions of Delivery for Valves; Valves for Potable Water Service, Requirements and Testing
DIN EN 16668:2018-05 Industrial valves - Requirements and testing for metallic valves as pressure accessories; German version EN 16668:2016+A1:2018 / Note: To be replaced by DIN EN 16668 (2022-02).
DIN EN 16668:2022-02 Industrial valves - Requirements and testing for metallic valves as pressure accessories; German and English version prEN 16668:2022 / Note: Date of issue 2022-01-07*Intended as replacement for DIN EN 16668 (2018-05).
DIN EN 12569:2020-12 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests; German version EN 12569:2020
DIN EN 1074-5:2001 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves; German version EN 1074-5:2001
DIN EN ISO 10497:2010 Testing of valves - Fire type-testing requirements (ISO 10497:2010); German version EN ISO 10497:2010
DIN EN 1567:2000-01 Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests; German version EN 1567:1999
DIN 3227:2008-04 Valves for potable water supply in buildings - Angle service valves - Requirements and tests
DIN 3227:2023-04 Valves for potable water supply in buildings - Angle service valves - Requirements and tests / Note: Date of issue 2023-02-24*Intended as replacement for DIN 3227 (2008-04).
DIN 3227:2023-10 Valves for potable water supply in buildings - Angle service valves - Requirements and tests
DIN EN 1567:2000 Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests; German version EN 1567:1999
DIN EN 1074-4:2000-10 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves; German version EN 1074-4:2000
DIN EN 1488:2020 Building valves - Expansion groups - Tests and requirements; German and English version prEN 1488:2020
DIN EN 1488:2021-09 Building valves - Expansion groups - Tests and requirements; German version EN 1488:2021
DIN EN ISO 10497:2010-06 Testing of valves - Fire type-testing requirements (ISO 10497:2010); German version EN ISO 10497:2010 / Note: To be replaced by DIN EN ISO 10497 (2021-07).
DIN EN 15092:2008-09 Building valves - Inline hot water supply tempering valves - Tests and requirements; German version EN 15092:2008
DIN EN 12569:2020 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests; German version EN 12569:2020
DIN EN 16668:2016 Industrial valves - Requirements and testing for metallic valves as pressure accessories; German version EN 16668:2016
DIN EN 15714-5:2022 Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements
DIN EN 15714-5:2019 Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements; German and English version prEN 15714-5:2019
DIN EN 15714-5:2021 Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements; German and English version prEN 15714-5:2021
DIN EN 15714-6:2023-03 Industrial valves - Actuators - Part 6: Hydraulic linear actuators for industrial valves - Basic requirements; German version EN 15714-6:2022
DIN EN 15714-5:2022-10 Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements; German version EN 15714-5:2022
DIN EN 1490:2000-06 Building valves - Combined temperature and pressure relief valves - Tests and requirements; German version EN 1490:2000
DIN EN 1488:2000 Building valves - Expansion groups - Tests and requirements; German version EN 1488:2000
DIN 3546-1:2002 Stopvalves for domestic water supply - Part 1: General requirements and tests for manually operated piston type gate valves, stopvalves for tapping valves, gate valves and diaphragm valves; Technical rule of the DVGW
DIN EN 1490:2000 Building valves - Combined temperature and pressure relief valves - Tests and requirements; German version EN 1490:2000
DIN 3230-5:2014-11 Technical conditions of delivery of valves - Valves for gas installations and gas pipelines - Part 5: Requirements and tests
DIN EN 15714-3:2022 Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
DIN EN 15714-3:2022-12 Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements; German version EN 15714-3:2022
DIN EN 15714-4:2010-02 Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements; German version EN 15714-4:2009
DIN EN 1487:2014-09 Building valves - Hydraulic safety groups - Tests and requirements; German version EN 1487:2014
DIN 44402-16:1972-03 Measurements of the electrical properties of electronic tubes and valves; methods of measurement of spurious and unwanted electrode currents
DIN EN 1213:1999 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements; German version EN 1213:1999
DIN EN 12266-2:2012-04 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements; German version EN 12266-2:2012
DIN EN 12266-2:2012 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements; German version EN 12266-2:2012
DIN EN 1487:2000 Building valves - Hydaulic safety groups - Tests and requirements; German version EN 1487:2000
DIN EN ISO 10497:2024-04 Testing of valves - Fire type-testing requirements (ISO 10497:2022); German version EN ISO 10497:2022
DIN EN ISO 10497:2021-07 Testing of valves - Fire type-testing requirements (ISO/DIS 10497:2021); German and English version prEN ISO 10497:2021 / Note: Date of issue 2021-06-04*Intended as replacement for DIN EN ISO 10497 (2010-06).
DIN EN ISO 21922:2018-09 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking (ISO/DIS 21922:2018); German and English version prEN ISO 21922:2018 / Note: Date of issue 2018-07-27*Intended as replacement for DIN EN 12284 (2004-01).
DIN EN ISO 22153:2021-07 Electric actuators for industrial valves - General requirements (ISO 22153:2020); German version EN ISO 22153:2021
DIN EN 12284:2004-01 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking; German version EN 12284:2003 / Note: To be replaced by DIN EN ISO 21922 (2018-09).
DIN EN 12266-1:2012 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements; German version EN 12266-1:2012
DIN EN 12266-1:2012-06 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements; German version EN 12266-1:2012
DIN EN 1074-2:2004-07 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves; German version EN 1074-2:2000 + A1:2004
DIN EN 1074-5:2001-04 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves; German version EN 1074-5:2001
DIN EN 1074-3:2000-07 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves; German version EN 1074-3:2000
DIN EN 1213:1999-12 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements; German version EN 1213:1999
DIN EN 14141:2013-08 Valves for natural gas transportation in pipelines - Performance requirements and tests; German version EN 14141:2013
DIN 3266:2009 Valves for drinking water installations on private premises - Anti-vacuum valve Types D and E - Requirements and tests
DIN EN 1074-2:2004 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves; German version EN 1074-2:2000 + A1:2004
DIN EN 15714-4:2010 Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements; German version EN 15714-4:2009
DIN EN 1488:2021 Building valves - Expansion groups - Tests and requirements; German version EN 1488:2021

未注明发布机构, valve requirements

DIN EN ISO 10497 E:2021-07 Valve Test Valve Fire Resistance Test Requirements (Draft)
DIN EN 12569 E:2019-09 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
DIN 3546-1 E:2001-05 Stopvalves for domestic water supply - Part 1: General requirements and tests for manually operated piston type gate valves, stopvalves for tapping valves, gate valves and diaphragm valves; Technical rule of the DVGW
DIN 3546-1:1990 Stopvalves for domestic water supply - Part 1: General requirements and tests for manually operated piston type gate valves, stopvalves for tapping valves, gate valves and diaphragm valves; Technical rule of the DVGW
DIN 3230-5 E:2008-04 Technical conditions of delivery of valves - Valves for gas installations and gas pipelines - Part 5: Requirements and tests
DIN 3230-5 E:2013-08 Technical conditions of delivery of valves - Valves for gas installations and gas pipelines - Part 5: Requirements and tests
DIN 3230-5 E:2000-03 Technical conditions of delivery of valves - Valves for gas installations and gas pipelines - Part 5: Requirements and tests
DIN EN 15714-6 E:2021-10 Industrial valves - Actuators - Part 6: Hydraulic linear actuators for industrial valves - Basic requirements
DIN EN 12266-2 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
DIN EN 15714-3 E:2021-10 Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
DIN EN ISO 22153 E:2021-02 General requirements for electric actuators for industrial valves (draft)
DIN EN 12266-1:2003 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
DIN EN 12266-1 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
DIN EN 1074-5 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves
DIN 3266 E:2016-08 Valves for drinking water installations on private premises - Anti-vacuum valve Types D and E - Requirements and tests
DIN 3266:1979 Valves for drinking water installations on private premises - Anti-vacuum valve Types D and E - Requirements and tests
DIN EN 12284 E:1996-05 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking

工业和信息化部, valve requirements

JB/T 13876-2020 General requirements for valve stems and parts

GOST, valve requirements

GOST R 59851-2021 Pipeline valves. Requirements for the materials of the valves used for hydrogen sulfide containing media

Danish Standards Foundation, valve requirements

DS/EN 1491:2001 Building valves - Expansion valves - Tests and requirements
DS/EN 12569:2020 Industrial valves – Valves for chemical and petrochemical process industry – Requirements and tests
DS/EN 1489:2001 Building valves - Pressure safety valves - Tests and requirements
DS/EN 12569+AC:2000 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
DS/EN 1567:2001 Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests
DS/EN 15714-2:2010 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
DS/EN 15092:2008 Building valves - Inline hot water supply tempering valves - Tests and requirements
DS/EN 1488:2001 Building valves - Expansion groups - Tests and requirements
DS/EN ISO 10497:2010 Testing of valves - Fire type-testing requirements
DS/EN 1490:2001 Building valves - Combined temperature and pressure relief valves - Tests and requirements
DS/EN 15714-4:2009 Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements
DS/EN 1487:2001 Building valves - Hydraulic safety groups - Tests and requirements
DS/EN 12266-2:2012 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
DS/EN 15714-3:2009 Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
DS/EN 12284:2003 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
DS/ISO 21922:2021 Refrigerating systems and heat pumps – Valves – Requirements, testing and marking
DS/EN 12266-1:2012 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
DS/EN 1074-2/A1:2004 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves
DS/EN 1074-2:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves
DS/EN 1074-3:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves
DS/EN 1074-4:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves
DS/EN 1074-5:2001 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves
DS/EN 14141:2013 Valves for natural gas transportation in pipelines - Performance requirements and tests
DS/EN ISO 22153:2021 Electric actuators for industrial valves – General requirements (ISO 22153:2020)
DS/ISO 22153:2021 Electric actuators for industrial valves – General requirements (ISO 22153:2020)
DS/EN 1213:2001 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements

Lithuanian Standards Office , valve requirements

LST EN 1491-2000 Building valves - Expansion valves - Tests and requirements
LST EN 1489-2000 Building valves - Pressure safety valves - Tests and requirements
LST EN 12569-2000 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
LST EN 12569-2000/AC-2003 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
LST EN 12569-2020 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
LST EN 1567-2000 Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests
LST EN 15714-2-2010 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
LST EN 15092-2008 Building valves - Inline hot water supply tempering valves - Tests and requirements
LST EN 1488-2000 Building valves - Expansion groups - Tests and requirements
LST EN 1488-2021 Building valves - Expansion groups - Tests and requirements
LST EN 1490-2000 Building valves - Combined temperature and pressure relief valves - Tests and requirements
LST EN 15714-4-2010 Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements
LST EN 1487-2000 Building valves - Hydraulic safety groups - Tests and requirements
LST EN 12266-2-2012 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
LST EN ISO 10497:2010 Testing of valves - Fire type-testing requirements (ISO 10497:2010)
LST EN 15714-3-2010 Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
LST EN 12284-2004 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
LST EN 12266-1-2012 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
LST EN 1074-3-2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves
LST EN 1074-2-2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves
LST EN 1074-5-2002 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves
LST EN 1074-4-2002 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves
LST EN 1074-2-2000/A1-2004 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves
LST EN 14141-2004 Valves for natural gas transportation in pipelines - Performance requirements and tests
LST EN ISO 22153:2021 Electric actuators for industrial valves - General requirements (ISO 22153:2020)
LST EN 1213-2000 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements

AT-ON, valve requirements

OENORM EN 1491-2021 Building valves - Expansion valves - Tests and requirements
ONORM M 7343-1984 Technical specifications for delivery f valves; valves for drinking water; equirements and tests
ONORM M 7341-1985 Technical specifications for delivery of valves; alvesfor combustible liquids; equirements and tests
OENORM EN 1488-2021 Building valves - Expansion groups - Tests and requirements
OENORM EN 15714-6-2021 Industrial valves - Actuators - Part 6: Hydraulic linear actuators for industrial valves - Basic requirements
OENORM EN 15714-5-2021 Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements
ONORM M 7342-1984 Technical specifications for delivety of valves; alves for gas pipelines and gas-supply nstallations; requirements and tests
ONORM M 7436-1989 Lubricants forgas valves and controls; requirements, feste
OENORM EN 15714-3-2021 Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
OENORM EN ISO 10497:2021 Testing of valves - Fire type-testing requirements (ISO/DIS 10497:2021)

AENOR, valve requirements

UNE-EN 1491:2001 Building valves - Expansion valves - Tests and requirements.
UNE-EN 1489:2001 Building valves - Pressure safety valves - Tests and requirements.
UNE-EN 12569:2000 INDUSTRIAL VALVES - VALVES FOR CHEMICAL AND PETROCHEMICAL PROCESS INDUSTRY - REQUIREMENTS AND TESTS
UNE-EN 15714-2:2010 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
UNE-EN 15092:2009 Building valves - Inline hot water supply tempering valves - Tests and requirements
UNE-EN 1488:2001 Building valves - Expansion groups - Tests and requirements.
UNE-EN 1567:2000 BUILDING VALVES - WATER PRESSURE REDUCING VALVES AND COMBINATION WATER PRESSURE REDUCING VALVES - REQUIREMENTS AND TESTS
UNE-EN 1490:2001 Building valves - Combined temperature and pressure relief valves - Tests and requirements.
UNE-EN 15714-4:2010 Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements
UNE-EN 1487:2015 Building valves - Hydraulic safety groups - Tests and requirements
UNE-EN 12266-2:2013 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
UNE-EN ISO 10497:2010 Testing of valves - Fire type-testing requirements (ISO 10497:2010)
UNE-EN 15714-3:2010 Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
UNE-EN 12284:2005 REFRIGERATING SYSTEMS AND HEAT PUMPS. VALVES. REQUIREMENTS, TESTING AND MARKING
UNE-EN 12266-1:2013 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
UNE-EN 1213:2000 BUILDING VALVES - COPPER ALLOY STOPVALVES FOR POTABLE WATER SUPPLY IN BUILDINGS - TESTS AND REQUIREMENTS.
UNE-EN 1074-4:2001 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves
UNE-EN 1074-3:2001 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves
UNE-EN 1074-2/A1:2004 Valves for water supply - Fitness for purpose requirements and appropriate verification test - Part 2: Isolating valves
UNE-EN 1074-2:2001 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves.
UNE-EN 14141:2014 Valves for natural gas transportation in pipelines - Performance requirements and tests

ES-UNE, valve requirements

UNE-EN 1491:2023 Building valves - Expansion valves - Tests and requirements
UNE-EN 16668:2016+A1:2018 Industrial valves - Requirements and testing for metallic valves as pressure accessories
UNE-EN 12569:2021 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
UNE-EN 1488:2021 Building valves - Expansion groups - Tests and requirements
UNE-EN 15714-5:2023 Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements
UNE-EN 15714-6:2023 Industrial valves - Actuators - Part 6: Hydraulic linear actuators for industrial valves - Basic requirements
UNE-EN ISO 22153:2021 Electric actuators for industrial valves - General requirements (ISO 22153:2020)
UNE-EN 15714-3:2023 Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
UNE-EN ISO 10497:2023 Testing of valves - Fire type-testing requirements (ISO 10497:2022)
UNE-EN ISO 21922:2022 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking (ISO 21922:2021)

GSO, valve requirements

GSO EN 1491:2021 Building valves – Expansion valves – Tests and requirements
BH GSO EN 1491:2022 Building valves – Expansion valves – Tests and requirements
GSO EN 1567:2022 Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests
BH GSO EN 1567:2023 Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests
BH GSO ISO 10497:2016 Testing of valves -- Fire type-testing requirements
GSO EN 15092:2022 Building valves - Inline hot water supply tempering valves - Tests and requirements
BH GSO EN 15092:2023 Building valves - Inline hot water supply tempering valves - Tests and requirements
BH GSO EN 1074-4:2015 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves
OS GSO EN 1074-4:2014 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves
GSO EN 12266-2:2021 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria – Supplementary requirements
BH GSO EN 12266-2:2022 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria – Supplementary requirements
GSO ISO/TR 7470:2015 Valve outlets for gas cylinders -- List of provisions which are either standardized or in use
GSO EN 12266-1:2021 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
BH GSO EN 12266-1:2022 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
GSO IEC 60151-15:2014 Measurements of the electrical properties of electronic tubes and valves. Part 15: Methods of measurement of spurious and unwanted electrode currents
GSO EN 1074-3:2021 Valves for water supply – Fitness for purpose requirements and appropriate verification tests – Part 3: Check valves
GSO EN 1074-5:2014 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves
BH GSO EN 1074-2:2015 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves
GSO ISO 15996:2014 Gas cylinders -- Residual pressure valves -- General requirements and type testing
GSO ISO 9635-1:2013 Agricultural irrigation equipment -- Irrigation valves -- Part 1: General requirements
OS GSO ISO 9635-1:2013 Agricultural irrigation equipment -- Irrigation valves -- Part 1: General requirements

SCC, valve requirements

NS-EN 1491:2000 Building valves — Expansion valves — Tests and requirements
DANSK DS/EN 1491:2001 Building valves - Expansion valves - Tests and requirements
BS 5146-2:1984 Inspection and test of valves-Specification for pressure testing requirements for general purpose valves
NS-EN 1489:2000 Building valves — Pressure safety valves — Tests and requirements
DANSK DS/EN 1489:2001 Building valves - Pressure safety valves - Tests and requirements
NS-EN 12569:2020 Industrial valves — Valves for chemical and petrochemical process industry — Requirements and tests
DANSK DS/EN 12569:2020 Industrial valves – Valves for chemical and petrochemical process industry – Requirements and tests
AENOR UNE-EN 16668:2016 Industrial valves - Requirements and testing for metallic valves as pressure accessories
AENOR UNE-EN 12569:2021 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
DANSK DS/EN 16668:2016 Industrial valves – Requirements and testing for metallic valves as pressure accessories
NS-EN 16668:2016 Industrial valves - Requirements and testing for metallic valves as pressure accessories
NS-EN 12569:1999 Industrial valves — Valves for chemical and petrochemical process industry — Requirements and tests
DIN EN 16668/A1 E:2017 Draft Document - Industrial valves - Requirements and testing for metallic valves as pressure accessories; German and English version EN 16668:2016/prA1:2017
DIN EN 16668 E:2015 Draft Document - Industrial valves - Requirements and testing for metallic valves as pressure accessories; German version prEN 16668:2014
NS-EN 1567:1999 Building valves — Water pressure reducing valves and combination water pressure reducing valves — Requirements and tests
DANSK DS/EN 1567:2001 Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests
DANSK DS/EN 15714-2:2009 Industrial valves – Actuators – Part 2: Electric actuators for industrial valves – Basic requirements
NS-EN 15714-2:2009 Industrial valves — Actuators — Part 2: Electric actuators for industrial valves — Basic requirements
NS-EN 1488:2021 Building valves - Expansion groups - Tests and requirements
DANSK DS/EN 1488:2021 Building valves – Expansion groups – Tests and requirements
DIN EN 17070 E:2017 Draft Document - Industrial valves - Minimum performance requirements; German and English version prEN 17070:2016
NS-EN 1488:2000 Building valves — Expansion groups — Tests and requirements
DANSK DS/EN ISO 10497:2010 Testing of valves – Fire type-testing requirements
DANSK DS/EN 15092:2008 Building valves - Inline hot water supply tempering valves - Tests and requirements
NS-EN 15092:2008 Building valves — Inline hot water supply tempering valves — Tests and requirements
DIN EN 15714-2 E:2008 Draft Document - Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements; German version prEN 15714-2:2007
UNE-EN 12266-2:2003 Industrial valves. Testing of valves. Part 2: Tests, test procedures and acceptance criteria. Supplementary requirements.
NS-EN 12266-2:2002 Industrial valves — Testing of valves — Part 2: Tests, test procedures and acceptance criteria — Supplementary requirements
DANSK DS/EN 1490:2001 Building valves - Combined temperature and pressure relief valves - Tests and requirements
DIN EN 15092 E:2006 Draft Document - Building valves - Inline hot water supply tempering valves - Tests and requirements; German version prEN 15092:2006
NS-EN 1490:2000 Building valves — Combined temperature and pressure relief valves — Tests and requirements
DANSK DS/EN 15714-3:2009 Industrial valves – Actuators – Part 3: Pneumatic part-turn actuators for industrial valves – Basic requirements
DANSK DS/EN 15714-4:2009 Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements
DIN 3230-5:2014 Technical conditions of delivery of valves - Valves for gas installations and gas pipelines - Part 5: Requirements and tests
NS-EN 12266-2:2012 Industrial valves — Testing of metallic valves — Part 2: Tests, test procedures and acceptance criteria — Supplementary requirements
NS-EN 1487:2014 Building valves — Hydraulic safety groups — Tests and requirements
DANSK DS/EN 1487:2014 Building valves - Hydraulic safety groups - Tests and requirements
NS-EN 1487:2000 Building valves — Hydraulic safety groups — Tests and requirements
UNE-EN 1487:2001 Building valves - Hydraulic safety groups - Tests and requirements.
BS 6755-1:1986 Testing of valves-Specification for production pressure testing requirements
BS 6755-2:1987 Testing of valves-Specification for fire type-testing requirements
NS-EN 15714-3:2009 Industrial valves — Actuators — Part 3: Pneumatic part-turn actuators for industrial valves — Basic requirements
NS-EN 15714-4:2009 Industrial valves — Actuators — Part 4: Hydraulic part-turn actuators for industrial valves — Basic requirements
NS-EN 12266-1:2003 Industrial valves — Testing of valves — Part 1: Pressure tests, test procedures and acceptance criteria — Mandatory requirements
DIN 3230-5 E:2013 Draft Document - Technical conditions of delivery of valves - Valves for gas installations and for gas pipelines - Part 5: Requirements and tests
DANSK DS/EN 12266-2:2012 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
UNE-EN 12266-1:2003 Industrial valves. Testing of valves. Part 1: Pressure tests, test procedures and acceptance criteria. Mandatory requirements.
UNE-EN ISO 10497:2005 Testing of valves. Fire type-testing requirements. (ISO 10497:2004)
NS-EN ISO 10497:2010 Testing of valves — Fire type-testing requirements (ISO 10497:2010)
NS-EN ISO 10497:2004 Testing of valves — Fire type-testing requirements (ISO 10497:2004)
DIN EN 12266-2 E:2009 Draft Document - Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
DIN EN 15714-4 E:2008 Draft Document - Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements; German version prEN 15714-4:2007
DIN EN 15714-3 E:2008 Draft Document - Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements; German version prEN 15714-3:2007
NS-EN 12266-1:2012 Industrial valves — Testing of metallic valves — Part 1: Pressure tests, test procedures and acceptance criteria — Mandatory requirements
NS-EN 1213:1999 Building valves — Copper alloy stopvalves for potable water supply in buildings — Tests and requirements
DANSK DS/EN 1213:2001 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements
BS ISO 22153:2020 Electric actuators for industrial valves. General requirements
NS-EN ISO 22153:2021 Electric actuators for industrial valves - General requirements (ISO 22153:2020)
DANSK DS/ISO 22153:2021 Electric actuators for industrial valves – General requirements (ISO 22153:2020)
DANSK DS/EN ISO 22153:2021 Electric actuators for industrial valves – General requirements (ISO 22153:2020)
DANSK DS/EN 14141:2013 Valves for natural gas transportation in pipelines - Performance requirements and tests
NS-EN 12284:2003 Refrigerating systems and heat pumps — Valves — Requirements, testing and marking
DIN EN 1487 E:2012 Draft Document - Building valves - Hydraulic safety groups - Tests and requirements; German version prEN 1487:2012
DANSK DS/EN 12284:2003 Refrigerating systems and heat pumps – Valves – Requirements, testing and marking
DANSK DS/EN 12266-1:2012 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
DANSK DS/EN 1074-4:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves
DANSK DS/EN 1074-5:2001 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves
NS-EN 1074-5:2001 Valves for water supply — Fitness for purpose requirements and appropriate verification tests — Part 5: Control valves
DANSK DS/EN 1074-3:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves
DANSK DS/EN 1074-2:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves
NS-EN 1074-3:2000 Valves for water supply — Fitness for purpose requirements and appropriate verification tests — Part 3: Check valves
NS-EN 1074-4:2000 Valves for water supply — Fitness for purpose requirements and appropriate verification tests — Part 4: Air valves
NS-EN 1074-2:2000 Valves for water supply — Fitness for purpose requirements and appropriate verification tests — Part 2: Isolating valves
DIN EN 12266-1 E:2009 Draft Document - Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements; German version prEN 12266-1:2009
NS-EN 14141:2013 Valves for natural gas transportation in pipelines — Performance requirements and tests
NS-EN 14141:2003 Valves for natural gas transportation in pipelines — Performance requirements and tests
DIN EN 12569 E:2019 Draft Document - Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests; German and English version prEN 12569:2019

PL-PKN, valve requirements

PN M74022-01-1986 Industrial valves Cast iron wedge gates valves for silt liquid Requirements and tests
PN M74001-1992 Industrial valves. Requirements and tests
PN-EN 12569-2021-03 E Industrial valves -- Valves for chemical and petrochemical process industry -- Requirements and tests
PN M74150-01-1986 Industrial valves Cast iron globe cheok valves Requirements and tests
PN-EN 1488-2021-10 E Building valves -- Expansion groups -- Tests and requirements
PN H74374-01-1986 Valves and pipelines Flanged connections Sealings General re?uirements
PN H74701-1989 Valves and pipelines Steel flanges for nomina? pressure to 40 MPa Reguirements
PN-EN ISO 22153-2021-09 E Electric actuators for industrial valves -- General requirements (ISO 22153:2020)

Professional Standard - Machinery, valve requirements

JB/T 7928-2014 Industrial valves.Delivery specification
JB/T 7928-1999 General purpose industrial valves.Delivery specification
JB/T 3595-2002 Valves for power station-general requirements
JB/T 7927-2014 Valve cast steel visual quality requirements
JB/T 7927-1999 Valve cast steel visual quality requirement
JB/T 1308.1～2-1999 PN250MPa ultra-high pressure valves and pipe fittings technical requirements
JB/T 6438-1992 Plasma arc surfacing welding for sealing surface of valves Technical requirements
JB/T 6438-2011 Technical requirements for plasma arc overlaying welding for valve sealing surface
JB/T 12001-2014 Valves for the supercritical and ultra-supercritical steam power plants.General requirements

RU-GOST R, valve requirements

GOST 4666-2015 Pipeline valves. Requirements for the marking
GOST 6127-1952 Bath valves. Technical requirements
GOST 12.2.063-2015 Pipelinevalves. General safety requirements
GOST 33260-2015 Pipelinevalves. Metals used in pipeline valves production. Basic requirements for choice of materials
GOST R 55509-2013 Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials
GOST R 53810-2010 Automobile engines. Valves. Technical requirements and test methods
GOST 34777-2021 Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
GOST 33258-2015 Pipeline valves. Surfacing and quality control of surfaced surfaces. Technical requirements

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, valve requirements

GB/T 12224-2015 General requirements for industrial steel valves
GB/T 12224-2005 General requirements for industrial steel valves
GB/T 12224-1989 General requirements for steel valves
GB/T 24919-2010 Installation,operation,maintenance of industrial valves.General requirements
GB 26640-2011 Specification for minimal thickness of the shell of valves
GB/T 27726-2011 Thermoplastics valves.Pressure test methods and requirements
GB/T 42177-2022 Technical requirements and test methods for gaseous hydrogen valves used in hydrogen fuelling stations

GOSTR, valve requirements

GOST 4666-1975 Valves. Marking and distinctive painting
GOST 34655-2020 Pipeline valves. Gaskets of oval, octagonal section, lens steel for valve flanges. Design, dimensions and general technical requirements

Manufacturers Standardization Society of the Valve and Fitting Industry (MSS), valve requirements

MSS SP-134-2010 Valves for Cryogenic Service Including Requirements for Body/Bonnet Extensions
MSS SP-134A-2006 Valves for Cryogenic Service Including Requirements for Body/Bonnet Extensions
MSS SP-134-2012 Valves for Cryogenic Service, including Requirements for Body/Bonnet Extensions

SE-SIS, valve requirements

SIS SS 2607-1988 Gas cylinders — Valves — Requirements and testing
SIS SS 1241-1992 Valves for piping — Basic technical requirements and terms of deliverl

Korean Agency for Technology and Standards (KATS), valve requirements

KS B 2824-2017(2022) Gear box for valves — General requirements
KS B 2824-2017 Gear box for valves — General requirements
KS B 2824-2022 Gear box for valves — General requirements
KS B ISO 10497:2005 Testing of valves－Fire type-testing requirements
KS B ISO 10497-2005(2020) Testing of valves－Fire type-testing requirements
KS B ISO 10497-2020 Testing of valves－Fire type-testing requirements
KS B 2823-2017 Electric actuator for industrial valves — General requirements
KS B 2823-2022 Electric actuator for industrial valves — General requirements
KS B 2823-2017(2022) Electric actuator for industrial valves — General requirements

CZ-CSN, valve requirements

CSN 13 3005-1984 Marking of industrial val ves. Requirements for marking of control valves
CSN 13 3005-1-1994 Industrial valves. Marking. General technical requirements
CSN 07 5820-1985 Valves for fluent fuels with electrical control. Technical requirements. Testing

CH-SNV, valve requirements

SN EN 12569-2021 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
SN EN ISO 22153:2021 Electric actuators for industrial valves - General requirements (ISO 22153:2020)

IT-UNI, valve requirements

UNI EN 12569-2021 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
UNI EN 1488-2021 Building valves - Expansion groups - Tests and requirements
UNI EN ISO 22153:2021 Electric actuators for industrial valves - General requirements

Professional Standard - Petroleum, valve requirements

SY/T 6960-2013 Testing of valves.Fire type-testing requirements
SY 6960-2013 Fire test requirements for valve test

CEN - European Committee for Standardization, valve requirements

PREN 17070-2016 Industrial valves - Minimum performance requirements
EN 13126-1:2006 Building hardware - Requirements and test methods for windows and doors height windows - Part 1: Requirements common to all types of hardware

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., valve requirements

SP-134A-2006 Valves for Cryogenic Service Including Requirements for Body/Bonnet Extensions
SP-134-2006 Valves for Cryogenic Service Including Requirements for Body/Bonnet Extensions
SP-134-2010 Valves for Cryogenic Service Including Requirements for Body/Bonnet Extensions
SP-120-2011 Flexible Graphite Packing System for Rising Stem Valves – Design Requirements
SP-100-1988 Qualification Requirements for Elastomer Diaphragms for Nuclear Service Diaphragm Type Valves
SP-100-1997 Qualification Requirements for Elastomer Diaphragms for Nuclear Service Diaphragm Type Valves

Group Standards of the People's Republic of China, valve requirements

T/WZBF 038-2023 Technical requirements for valve leakage detection
T/SHMHZQ 021-2023 Technical requirements specification for semiconductor vacuum valves
T/LASERJS 001-2020 Technical requirements for laser cladding for pump and valve sealing surface
T/CGMA 0406-2022 Safety Requirements and Test Method for High Pressure Gaseous Hydrogen Valves
T/BSRS 058-2021 Valve remote control device application technical requirements of reactor nuclear power plants
T/CMEPCA 012-2023 Assessment requirements for quality grading and forerunner — Pipe Valve

Defense Logistics Agency, valve requirements

DLA A-A-59440 C-2012 COMMERCIAL ITEM DESCRIPTION COCK-VALVES AND VALVES, GENERAL REQUIREMENTS FOR

Henan Provincial Standard of the People's Republic of China, valve requirements

DB4102/T 005-2020 General requirements for air separation plant valve installation

American National Standards Institute （ANSI), valve requirements

ANSI/ASTM F1792:1997 Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
ANSI/ASSE 1069-2005 Performance Requirements for Automatic Temperature Control Mixing Valves

Professional Standard - Agriculture, valve requirements

SN/T 1455-2012 General requirements for import and export valve inspection regulations

RO-ASRO, valve requirements

STAS 1180-1990 Cast iron and steel industrial valves. Gate and globe stop valves. Special technical requirements for quality
STAS 1702-1990 Cast iron and steel industrial valves. Swing and globe check valves. Special technical requirements for quality
STAS 839/1-1987 VALVES FOR INNER TUBES AND TUBELESS TYRES General technical requirements for qualityYALVES FOR INNEH TUBES AND TUBELESS TYRES General technical requirements for quality

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, valve requirements

GB/T 26640-2011 Specification for minimal thickness of the shell of valves
GB/T 35842-2018 Technical requirements for pre-insulated directly buried valve of urban heating

Professional Standard - Nuclear Industry, valve requirements

EJ/T 1081-1998 Safety-related valves functional specification standard
EJ/T 1022.8-1996 Technical requirements for installation and maintenance of valves in pressurized water reactor nuclear power plants

NO-SN, valve requirements

NS 1700-1966 Valves and accessories for piping - Technical delivery requirements
NS 1707-1966 Fittings for piping - Sanitary valves - Capacity requirements and test methods

Professional Standard - Aerospace, valve requirements

QJ 3305-2008 General requirements for missile (launch vehicle) valve manufacturing

HU-MSZT, valve requirements

MNOSZ 4336-1956 Internal combustion engine valve spring technical requirements and testing

Professional Standard - Urban Construction, valve requirements

CJ/T 481-2016 General specifications of ductile iron valves for water supply
CJ/T 3049-1995 General specifications of iron valves for urban water supply
CJ 3005-1992 General specification for gray iron valves of urban gas

VN-TCVN, valve requirements

TCVN 1385-1985 Pipeline valves.Steel swing check valves for Pnom up tu 16MPa.Technical requirements

American Society for Testing and Materials (ASTM), valve requirements

ASTM F1792-97(2010) Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., valve requirements

ASHRAE AT-96-4-2-1996 "Valve Requirements for ""Backpressure@"" ""Flow@"" and ""Cycle Change"" Control in Thermal Storage Systems"

JSAE - Society of Automotive Engineers of Japan@ Inc., valve requirements

JASO E205-2003 Compressed natural gas vehicles - Opening and shutting valves - Performance requirements

Professional Standard - Traffic, valve requirements

JT/T 189-1995 Repairing technical requirement for sludge gate,gate vale cylinder of scoop suction dredge

BE-NBN, valve requirements

NBN D 12-100-1987 Thermostatic valves for main heating equipment, requirements and test methods