ZH
RU
ES

Three-point bending test method for steel pipes

Three-point bending test method for steel pipes, Total:219 items.

In the international standard classification, Three-point bending test method for steel pipes involves: Glass, Materials for aerospace construction, Plastics, Refractories, Pipeline components and pipelines, Shipbuilding and marine structures in general, Medical equipment, Valves, Products of the textile industry, Solar energy engineering, Testing of metals, Road vehicle systems, Inorganic chemicals, Construction materials, Reinforced plastics, Iron and steel products, Paper and board, Textile machinery, Ceramics, Petroleum, petroleum products and natural gas handling equipment, Paints and varnishes, Insulating materials, Materials for the reinforcement of composites, Magnetic materials, Surface treatment and coating, Rubber and plastics products, Corrosion of metals, Products of the chemical industry, Structures of buildings, Raw materials for rubber and plastics, Earthworks. Excavations. Foundation construction. Underground works, Fruits. Vegetables, Fluid power systems, Aerospace fluid systems and components, Aerospace electric equipment and systems, Electronic components in general, Electronic component assemblies.

German Institute for Standardization, Three-point bending test method for steel pipes

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN 524-3:1997 Steel strip sheaths for prestressing tendons - Test methods - Part 3: To-and-fro bending test; German version EN 524-3:1997
DIN EN 524-3:1997-07 Steel strip sheaths for prestressing tendons - Test methods - Part 3: To-and-fro bending test; German version EN 524-3:1997 / Note: Applies in conjunction with DIN EN 523 (1997-07).
DIN EN 1680:1997 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
DIN EN 1680:1997-03 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
DIN EN 1680:2023-11 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms; German and English version prEN 1680:2023 / Note: Date of issue 2023-10-13*Intended as re...
DIN EN 524-2:1997 Steel strip sheaths for prestressing tendons - Test methods - Part 2: Determination of flexural behaviour; German version EN 524-2:1997
DIN EN 524-2:1997-07 Steel strip sheaths for prestressing tendons - Test methods - Part 2: Determination of flexural behaviour; German version EN 524-2:1997 / Note: Applies in conjunction with DIN EN 523 (1997-07).
DIN EN 524-3 Berichtigung 1:2019-06 Steel strip sheaths for prestressing tendons - Test methods - Part 3: To-and-fro bending test; German version EN 524-3:1997; Corrigendum 1
DIN EN 12100:2023-11 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports; German and English version prEN 12100:2023 / Note: Date of issue 2023-10-13*Intended as replacement for DIN EN 12100 (1997-11).
DIN EN 12100:1997-11 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN EN 6059-402:2019 Aerospace Series - Electrical cables, installation - Protection sleeves - Test methods - Part 402: Bending properties; German and English version EN 6059-402:2019

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Three-point bending test method for steel pipes

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass—Three-point bending method
GB/T 33621-2017 Test method for bending properties of 3D braided fabric and its polymer matrix composites

British Standards Institution (BSI), Three-point bending test method for steel pipes

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
BS EN 524-3:1997 Steel strip sheaths for prestressing tendons - Test methods - To-and-fro bending test
BS ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
PD IEC/TR 63114:2018 Electrical steel. Reverse bend test method for electrical steel strip and sheet
19/30375027 DC BS ISO 23242. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
BS EN 1680:1997 Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanism
BS M 55:1984 Method for rotary flexure testing of hydraulic tubing joints and fittings for aerospace use
BS 6043-3.5.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method

American Society for Testing and Materials (ASTM), Three-point bending test method for steel pipes

ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C78/C78M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM C1609/C1609M-19 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-05 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-06 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-07 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-19a Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-12 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM G10-10 Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM G10-83(1996)e1 Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM G10-10(2019) Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM C598-93(2003) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(2008) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(2013) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C1609/C1609M-10 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C947-03 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM C947-99 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM E2948-16a Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM E2948-22 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM G70-07 Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
ASTM G70-81(1998) Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
ASTM G10-10(2015) Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
ASTM E2948-16 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM E2948-16e1 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM A1122/A1122M-22 Standard Test Method for Bend Testing of Metallic-Coated Steel Sheet to Evaluate Coating Adhesion
ASTM C78/C78M-18 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-21 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-16 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C947-03(2016) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM C1018-97 Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (Withdrawn 2006)
ASTM C78/C78M-15a Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15b Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D5365-06 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D5365-01 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D5365-99 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D5365-01e1 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D5365-12 Standard Test Method for Long-Term Ring-Bending Strain of ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM C947-03(2023) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D1635/D1635M-19 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM C651-91(2005)e1 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-91(2010)e1 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-20 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-11 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-13 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-15 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM A309-94a(1999) Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
ASTM A309-01 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
ASTM A309-01(2007) Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
ASTM A309-01(2012) Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
ASTM D6272-10 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM C1899-21 Standard Test Method for Flexural Strength of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM D5365-18 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

国家市场监督管理总局、中国国家标准化管理委员会, Three-point bending test method for steel pipes

GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）
GB/T 244-2020 Metallic material—Tube—Bend test method
GB/T 38686-2020 Test method for flexibility of ultrathin glass—Two point bending method

Professional Standard-Ships, Three-point bending test method for steel pipes

CB/T 3522-1993 Test method for transverse bending of marine steel pipes
CB/T 3522-2016 Test method for transverse bending of marine steel pipes

Professional Standard - Medicine, Three-point bending test method for steel pipes

YY/T 0858-2011 Standard guide for three-piont bending of balloon expandable vascular stents and stent systems

European Committee for Standardization (CEN), Three-point bending test method for steel pipes

EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
prEN 524-3-1991 Steel strip sheaths for prestressing tendons; methods of test, to-and-frobending test
EN 524-3:1997 Steel strip sheaths for prestressing tendons - Test methods - Part 3: To-and-fro bending test
EN 524-2:1997 Steel strip sheaths for prestressing tendons - Test methods - Part 2: Determination of flexural behaviour
EN 2591-416:2001 Aerospace series - Elements of electrical and optical connection; Test methods - Part 416: Contact bending strength
DD ENV 658-5-1993 Advanced technical ceramics; mechanical properties of ceramic composites at room temperature; part 5: determination of shear strength by short span bend test (three-point)

Danish Standards Foundation, Three-point bending test method for steel pipes

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN 524-3:1998 Steel strip sheaths for prestressing tendons - Testmethods - Part 3: To-and-fro bending test
DS/EN 1680:1998 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism
DS/EN 524-2:1998 Steel strip sheaths for prestressing tendons - Test methods - Part 2: Determination of flexural behaviour
DS/EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test
DS/EN 12100:1998 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports

Lithuanian Standards Office , Three-point bending test method for steel pipes

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN 524-3-2000 Steel strip sheaths for prestressing tendons - Test methods - Part 3: To-and-fro bending test
LST EN 1680-2002 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms
LST EN 524-2-2000 Steel strip sheaths for prestressing tendons - Test methods - Part 2: Determination of flexural behaviour
LST EN 12100-2002 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports

Group Standards of the People's Republic of China, Three-point bending test method for steel pipes

T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural
T/CSBME 002-2017 Test methods for kinking properties of medical catheters other than intravascular catheters
T/CSTM 00820-2022 Rotary flexure test method of hydraulic tubing joints and fittings for civil aircraft
T/CSAE 155-2020 U-shaped constant bending load test method for hydrogen induced delayed fracture sensitivity of ultra high strength automobile steel plate

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Three-point bending test method for steel pipes

GB/T 244-2008 Metallic materials-tube.Bend test
GB/T 244-1997 Metallic materials--Tube--Bend test
GB/T 12347-1996 Steel wire rope--Bending fatigue testing
GB/T 12347-2008 Steel wire ropes.Bending fatigue testing
GB/T 2833-1996 Test method for cross-bending strength of vitrified pipe
GB/T 32976-2016 Test method for transverse bending of tubes of metallic materials
GB/T 17897-1999 Test of pitting corrosion resistance of stainless steels in the ferric chloride solution
GB/T 17897-2016 Corrosion of metals and alloys.Corrosion test for pitting corrosion resistance of stainless steels in the ferric chloride solution

Professional Standard - Aviation, Three-point bending test method for steel pipes

HB 5184-1981 Metal pipe bending test method

Professional Standard - Ferrous Metallurgy, Three-point bending test method for steel pipes

YB/T 5126-2003 Steel bars for reinforcement of concrete-Bend and rebend tests
YB/T 5126-1993 Steel bars for reinforcement of concrete-Bend and rebend tests
YB/T 4288-2012 Steel wire ropes for elevators.Bending fatigue testing

Society of Automotive Engineers (SAE), Three-point bending test method for steel pipes

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test

Malaysia Standards, Three-point bending test method for steel pipes

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

International Organization for Standardization (ISO), Three-point bending test method for steel pipes

ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending

Professional Standard - Railway, Three-point bending test method for steel pipes

TB/T 1354-1979 Rail bending fatigue test method
TB/T 2485-1994 High manganese steel frog bending fatigue test method

RU-GOST R, Three-point bending test method for steel pipes

GOST 30456-1997 Metal production. Rolled steel and tubes. Methods of blow bending tests

Professional Standard - Machinery, Three-point bending test method for steel pipes

JB/T 7716-1995 Four-point bending fatigue test method for welded joints

Professional Standard - Aquaculture, Three-point bending test method for steel pipes

SC/T 8062-2000 Test method for overall longitudinal bending of glass fiber reinforced plastics fishing vessel

工业和信息化部, Three-point bending test method for steel pipes

YB/T 4731-2019 Repeated bending test method for electrical steel strips (sheets)
JC/T 2373-2016 Test methods for elastic modulus and flexural strength of glass pipes notched ring method

AASHTO - American Association of State Highway and Transportation Officials, Three-point bending test method for steel pipes

T285-1989 Standard Method of Test for Bend Test for Bars for Concrete Reinforcement
T 285-1989 Standard Method of Test for Bend Test for Bars for Concrete Reinforcement
T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
T 97-2003 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

Japanese Industrial Standards Committee (JISC), Three-point bending test method for steel pipes

JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test
JIS Z 2288:2003 Methods of tensile shear test and bend test for thin clad steel sheets
JIS K 6330-9:1998 Testing methods for rubber and plastics hoses -- Part 9: Bending tests
JIS K 6330-4:2003 Testing methods for rubber and plastics hoses -- Part 4: Sub-ambient temperature flexibility tests

Korean Agency for Technology and Standards (KATS), Three-point bending test method for steel pipes

KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS F 2566-2000 Test method for flexural toughness of steel fiber reinforced concrete
KS C IEC TR 63114:2021 Electrical steel — Reverse bend test method for electrical steel strip and sheet
KS F 2325-2002(2017) Testing method for flexural strength of soil－cement using simple beam with third point loading
KS F 2325-2002(2022) Testing method for flexural strength of soil－cement using simple beam with third point loading

KR-KS, Three-point bending test method for steel pipes

KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS C IEC TR 63114-2021 Electrical steel — Reverse bend test method for electrical steel strip and sheet

Professional Standard - Textile, Three-point bending test method for steel pipes

FZ/T 90003.1-1991 Test method for plastic warp and weft bobbins static bending
FZ/T 60042-2014 3D braided polymer matrix composites.Test method for bending properties
FZ/T 60042-2013 Test method for flexural properties of resin-based three-dimensional braided composites

Professional Standard - Aerospace, Three-point bending test method for steel pipes

QJ 2099-1991 Test method for flexural properties of three-dimensional fiber reinforced composite materials
QJ 1445-1988 Rotary bend test method for hydraulic conduit fittings and fittings

Professional Standard - Petroleum, Three-point bending test method for steel pipes

SY/T 0038-2013 Test method for specific bendability of pipeline coatings
SY/T 0038-1997 Test method for specific bendability of pipeline coatings
SY/T 0084-1994 Standard test method for ring bendability of pipeline coatings
SY/T 0084-2012 Standard test methods for ring bendabity of pipeline coatings

International Electrotechnical Commission (IEC), Three-point bending test method for steel pipes

IEC TR 63114:2018 Electrical steel - Reverse bend test method of electrical steel strip and sheet

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Three-point bending test method for steel pipes

PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

IN-BIS, Three-point bending test method for steel pipes

IS 1692-1974

European Association of Aerospace Industries, Three-point bending test method for steel pipes

AECMA PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method Issue P 1
AECMA PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending Edition P1
AECMA PREN 2591-D16-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part D16 - Contact Bending Strength Issue P 1

PL-PKN, Three-point bending test method for steel pipes

PN C82055-02-1991 Test methods of pressed carbon products Determination of flexural strength by three-point method

国家能源局, Three-point bending test method for steel pipes

SY/T 4113.5-2019 Test methods for performance of pipeline anti-corrosion coatings Part 5: Bending resistance test
SY/T 7318.3-2017 Test methods for special properties of oil and gas transmission pipes Part 3: Full-scale bending test

The American Road & Transportation Builders Association, Three-point bending test method for steel pipes

AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
AASHTO T 97-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

GOSTR, Three-point bending test method for steel pipes

GOST 7268-1982 Steel. Method for determination of ability to mechanical ageing by impact bend testing
GOST R 58900-2020 Steel sheet bent profiles with stair landings and railings for construction. Test method for bearing capacity

American National Standards Institute （ANSI), Three-point bending test method for steel pipes

ANSI/AISI S910-2013 Test Method for Distortional Buckling of Cold-Formed Steel Hat Shaped Compression Members
ANSI/ASTM D5365:2012 Test Method for Long-Term Ring-Bending Strain of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

Association Francaise de Normalisation, Three-point bending test method for steel pipes

NF EN 2746:1998 Série aérospatiale - Plastiques renforcés au verre textile - Essai de flexion. Méthode des trois pannes.
NF P18-163*NF EN 524-3:1997 Steel strip sheaths for prestressing tendons. Test methods. Part 3 : to-and-fro bending test.
NF T54-920*NF EN 1680:1997 Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanism.
NF T54-930*NF EN 12100:1997 Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports.
NF EN 524-2:1997 Gaines en feuillard d'acier pour câbles de précontrainte - Méthodes d'essai - Partie 2 : détermination du comportement à la flexion.
NF C93-704-1-4*NF EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4 : cyclic bending test.
NF L54-002-059*NF EN 2591-416:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 416 : contact bending strength

ES-AENOR, Three-point bending test method for steel pipes

UNE 37-505-1989

AT-ON, Three-point bending test method for steel pipes

ONORM ENV 658-5-1993 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of shear strength by short span bend test (three-point)

Indonesia Standards, Three-point bending test method for steel pipes

SNI 4154-2014 Standard test method for flexural strength of concrete (using simple beam with center-point loading)

Aerospace, Security and Defence Industries Association of Europe (ASD), Three-point bending test method for steel pipes

ASD-STAN PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

CENELEC - European Committee for Electrotechnical Standardization, Three-point bending test method for steel pipes

EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test

AWS - American Welding Society, Three-point bending test method for steel pipes

D8.9M-2012 Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials (Third Edition)

American Welding Society (AWS), Three-point bending test method for steel pipes

AWS D8.9M-2012 Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials (Third Edition)