ZH
RU
ES

Diffusion plate effect

Diffusion plate effect, Total:486 items.

In the international standard classification, Diffusion plate effect involves: Electronic display devices, Non-textile floor coverings, Materials for aerospace construction, Thermodynamics and temperature measurements, Products of the textile industry, Construction materials, Air quality, Plastics, Installations in buildings, Pulps, Paper and board, Protection of and in buildings, Iron and steel products, Paper products, Fasteners for aerospace construction, Lubrication systems, Paint ingredients, Inorganic chemicals, Raw materials for rubber and plastics, Occupational safety. Industrial hygiene, Alarm and warning systems, Optics and optical measurements, Kitchen equipment, Wood-based panels, Glass, Rubber and plastics products, Construction of railways, Chipless working equipment, Welding, brazing and soldering, Surface treatment and coating, Protection against fire, Testing of metals, Fibre optic communications, Aerospace fluid systems and components, Applications of information technology, Biology. Botany. Zoology, Microbiology, Non-ferrous metals, Nuclear energy engineering, Analytical chemistry, Ceramics, Edible oils and fats. Oilseeds, Radiation protection, Elements of buildings, Medical sciences and health care facilities in general, Water quality, Continuous handling equipment, Fuels, Ground service and maintenance equipment, Paper production processes, Measurement of volume, mass, density, viscosity, Shipbuilding and marine structures in general, Vocabularies, Semi-manufactures of timber, Ladders, Acoustics and acoustic measurements, Fluid storage devices, Protection against dangerous goods, Geology. Meteorology. Hydrology.

US-FCR, Diffusion plate effect

FCR FED H-08-4 VOL 3 SEC II 621.6-1988 CEILING DIFFUSER TAKE-OFFS
FCR COE CHL-98-23 FINAL REPORT-1998 MAC3D: NUMERICAL MODEL FOR RESERVOIR HYDRODYNAMICS WITH APPLICATION TO BUBBLE DIFFUSERS
FCR COE CEGS 11375-1996 AIR SUPPLY AND DIFFUSION EQUIPMENT FOR SEWAGE TREATMENT, NOTICE 1-6 (1996) INCORPORATED

Group Standards of the People's Republic of China, Diffusion plate effect

T/CI 027-2021 Quantum Dot Diffusion Plate for LCD Backlight Module
T/CSTM 00123-2021 Determination of the chloride diffusion coefficient of concrete under applied axial stress
T/ZZB 0215-2017 Optical diffusion film for liquid crystal display(LCD) backlight unit
T/SHPTA 024.1-2022 Polyester film for photoelectric display Part?1?Polyester?Film?for?Diffuser?Film
T/QGCML 885-2023 Non-dispersion-shifted single-mode fiber with extended wavelength range for communication

Hebei Provincial Standard of the People's Republic of China, Diffusion plate effect

DB13/T 5803-2023 T-beam diffused beam erection operation procedures

NL-NEN, Diffusion plate effect

NEN 1843-1972 Measurement of diffuse reflectance of paper and board
NVN 2963-1992 Air quality. Workplace atmosphere. Determination of the concentration of aliphatich hydrocarbons by gas diffusive sampling with a dosemeter, thermal desorption and gas chromatography
NVN 2962-1992 Air quality. Workplace atmosphere. Determination of the concentration of aliphatich hydrocarbons by gas diffusive sampling with a dosemeter, liquid desorption and gas chromatography

SAE - SAE International, Diffusion plate effect

SAE AMS4301-1974 BORON-ALUMINUM COMPOSITE SHEET 50 v/o 5.6B@ 2024-0@ for Diffusion Bonding
SAE AMS4301A-1985 BORON-ALUMINUM COMPOSITE SHEET 50 v/o 5.6B@ 2024-0@ For Diffusion Bonding
SAE AMS4300A-1985 BORON-ALUMINUM COMPOSITE SHEET 50 v/o 5.6B@ 6061-0@ For Diffusion Bonding
SAE AMS4300-1974 BORON-ALUMINUM COMPOSITE SHEET 50 v/o 5.6B@ 6061-0@ For Diffusion Bonding
SAE AMS4300D-2017 Boron-Aluminum Composite Sheet 50 v/o 5.6B@ 6061-0@ For Diffusion Bonding
SAE AMS4301B-1991 Boron-Aluminum Composite Sheet 50 v/o 5.6B@ 2024-0@ for Diffusion Bonding
SAE AMS4301C-1996 Boron-Aluminum Composite Sheet 50 v/o 5.6B@ 2024-0@ for Diffusion Bonding
SAE AS9218-1999 Bolt@ Machine - Steel@ AMS 6304@ Diffused Nickel-Cadmium Plate@ Double Hexagon Extended Washer Head@ .250-28 UNJF-3A
SAE AS9219-2000 Bolt@ Machine - Steel AMS 6304@ Diffused Nickel - Cadmium Plate@ Double Hexagon Extended Washer Head@ .3125-24 UNJF-3A
SAE AS9686-1998 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ Steel AMS 6304@ Diffused Nickel Cadmium Plate@ .250-28 UNJF-3A
SAE AS9685-2000 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ Steel AMS 6304@ Diffused Nickel Cadmium Plate@ .190-32 UNJF-3A
SAE AS9687-1998 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ Steel AMS 6304@ Diffused Nickel Cadmium Plate@ .3125-24 UNJF-3A
SAE AS9216A-2002 Screw@ Machine - Steel AMS 6304@ Diffused Nickel-Cadmium Plate@ Double Hexagon Extended Washer Head@ Drilled@ .164-36 UNJF-3A
SAE AS9216B-2011 SCREW@ MACHINE - STEEL@ DIFFUSED NICKEL-CADMIUM PLATED@ DOUBLE HEXAGON EXTENDED WASHER HEAD@ DRILLED@ UNS K14675@ 195 KSI MIN@ .1640-36 UNJF-3A
SAE AS9216-1998 Screw@ Machine - Steel AMS 6304@ Diffused Nickel-Cadmium Plate@ Double Hexagon Extended Washer Head@ Drilled@ .164-36 UNJF-3A
SAE AS9217-1998 Bolt@ Machine - Steel AMS 6304@ Diffused Nickel-Cadmium Plate@ Double Hexagon Extended Washer Head@ Drilled@ .190-32 UNJF-3A
SAE AS9216C-2012 SCREW@ MACHINE - STEEL@ DIFFUSED NICKEL-CADMIUM PLATED@ DOUBLE HEXAGON EXTENDED WASHER HEAD@ DRILLED@ UNS K14675@ 195 KSI MIN@ .1640-36 UNJF-3A
SAE AS9459-1999 Bolt@ Machine-Steel@ AMS 6304@ Diffused Nickel-Cadmium Plated Hexagon Head@ .750-16 UNJF-3A
SAE AS9685A-2003 BOLT@ MACHINE - HEXAGON HEAD@ DRILLED@ 1 HOLE@ PD SHANK@ STEEL@ UNS K14675@ DIFFUSED NICKELCADMIUM PLATE@ 195 KSI MIN@ .1900-32 UNJF-3A
SAE AS9685B-2016 BOLT@ MACHINE - HEXAGON HEAD@ DRILLED@ 1 HOLE@ PD SHANK@ STEEL@ UNS K14675@ DIFFUSED NICKELCADMIUM PLATE@ 195 KSI MIN@ .1900-32 UNJF-3A
SAE AS1100B-2001 Union@ Flared Tube Bulkhead and Universal@ for Seal Ring
SAE AS1100A-1994 Union@ Flared Tube Bulkhead and Universal@ for Seal Ring
SAE AS1100C-2006 FITTING@ UNION@ FLARED TUBE BULKHEAD AND UNIVERSAL@ FOR SEAL RING
SAE AS9458A-2001 BOLT, MACHINE - STEEL, DIFFUSED NICKEL CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .6250-18 UNJF-3A
SAE AS9456A-2001 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .5000-20 UNJF-3A
SAE AS9450A-2001 SCREW, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED, UNS K14675, 195 KSI MIN, .1640-36 UNJF-3A
SAE AS33515B-2008 FITTING END@ STANDARD DIMENSIONS FOR BULKHEAD FLARELESS TUBE CONNECTIONS
SAE AS33515A-2007 FITTING END@ STANDARD DIMENSIONS FOR BULKHEAD FLARELESS TUBE CONNECTIONS
SAE AS33515D-2014 FITTING END@ STANDARD DIMENSIONS FOR BULKHEAD FLARELESS TUBE CONNECTIONS

Society of Automotive Engineers (SAE), Diffusion plate effect

SAE AMS4300C-2012 Boron-Aluminum Composite Sheet 50 v/o 5.6B, 6061-0, For Diffusion Bonding
SAE AMS4300B-1994 BORON-ALUMINUM COMPOSITE SHEET 50 v/o 5.6B, 6061-0, For Diffusion Bonding
SAE AMS4300C-2006 Boron-Aluminum Composite Sheet 50 v/o 5.6B, 6061-0, For Diffusion Bonding
SAE AMS4300B-1990 Boron-Aluminum Composite Sheet, 50 V/O 5.6B, 6061-0, For Diffusion Bonding
SAE AS9208-2000 Bolt, machine-steel AMS 6304, diffused nickel-cadmium plated, double hexagon extended washer head, .190-32 UNJF-3A
SAE AS9218C-2004 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A FSC 5305
SAE AS9686C-2022 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .2500-28 UNJF-3A
SAE AS9687A-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .3125-24 UNJF-3A
SAE AS9685A-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9685D-2023 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9686A-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .2500-28 UNJF-3A
SAE AS9685C-2022 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9687C-2022 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .3125-24 UNJF-3A
SAE AS9442-2000 Bolt, Machine-Steel AMS 6304, Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, .3125-24 UNJF-3A (ASG)
SAE AS21924B-2003 Union, Flareless Tube, Bulkhead and Universal
SAE AS9459A-2007 BOLT, MACHINE - STEEL, AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED HEXAGON HEAD, .750-16 UNJF-3A
SAE AS1249A-2014 ELBOW, 45°, FLARED TUBE BULKHEAD UNIVERSAL, FOR SEAL RING
SAE AS1366A-2014 ELBOW, 90°, FLARED TUBE BULKHEAD UNIVERSAL, FOR SEAL RING
SAE AS9459C-2021 BOLT, MACHINE - STEEL, AMS6304 (UNS K14675), DIFFUSED NICKEL-CADMIUM PLATED HEXAGON HEAD, .7500-16 UNJF-3A
SAE AS1253B-2014 TEE, FLARED TUBE, BULKHEAD UNIVERSAL ON SIDE, FOR SEAL RING
SAE AS21924E-2019 UNION, FLARELESS TUBE BULKHEAD AND UNIVERSAL
SAE MA2043-1986 UNION, FLARELESS TUBE BULKHEAD AND UNIVERSAL
SAE AS21924F-2021 UNION, FLARELESS TUBE BULKHEAD AND UNIVERSAL
SAE AS9441-2004 BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED, .250-28 UNJF-3A
SAE AS1253B-1994 TEE, FLARED TUBE, BULKHEAD UNIVERSAL ON SIDE, FOR SEAL RING
SAE AS1100-1976 UNION- FLARED TUBE, BULKHEAD AND UNIVERSAL, WITH SEAL RING
SAE AS1100B-2005 UNION, FLARED TUBE BULKHEAD AND UNIVERSAL, FOR SEAL RING
SAE AS1100C-2013 FITTING, UNION, FLARED TUBE BULKHEAD AND UNIVERSAL, FOR SEAL RING
SAE AS1100D-2023 FITTING, UNION, FLARED TUBE BULKHEAD AND UNIVERSAL, FOR SEAL RING
SAE AS9449A-2006 SCREW, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD UNS K14675, 195 KSI MIN, .1380-40 UNJF-3A
SAE AS9442-2004 BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKELCADMIUM PLATED, HEXAGON HEAD, DRILLED, .3125-24 UNJF-3A (ASG)
SAE AS9458C-2015 BOLT, MACHINE - STEEL, DIFFUSED NICKEL CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .6250-18 UNJF-3A
SAE AS1365A-1994 Tee, Flared Tube, Bulkhead Universal on Run, for Seal Ring
SAE AS1253A-1985 TEE - BULKHEAD AND UNIVERSAL FLARED TUBE, WITH SEAL RING
SAE AS1253-1976 TEE - BULKHEAD AND UNIVERSAL FLARED TUBE, WITH SEAL RING
SAE AS9451B-2007 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9456B-2007 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .5000-20 UNJF-3A
SAE AS9457B-2007 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .5625-18 UNJF-3A
SAE AS9453B-2007 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A
SAE AS9454B-2007 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .3750-24 UNJF-3A
SAE AS9455B-2007 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A
SAE AS9458B-2007 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .6250-18 UNJF-3A
SAE AS9452B-2007 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A
SAE AS9453C-2015 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A
SAE AS9456C-2015 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .5000-20 UNJF-3A
SAE AS9455C-2015 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A
SAE AS4674-1992(R2004) Tee assembly, retained nut on run, short flareless
SAE AS1366-2011 ELBOW-FLARED TUBE, 90° AND BULKHEAD UNIVERSAL WITH SEAL RING
SAE AS4328-2002 UNION, REDUCER, BULKHEAD, FLARED TUBE, FOR SEAL RING
SAE AS9207-1998 SCREW, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL - CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, .164-36 UNJF-3A
SAE AS9450A-2006 SCREW, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED, UNS K14675, 195 KSI MIN, .1640-36 UNJF-3A
SAE AS9450B-2015 SCREW, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED, UNS K14675, 195 KSI MIN, .1640-36 UNJF-3A
SAE AS33515-2007 FITTING END, STANDARD DIMENSIONS FOR BULKHEAD FLARELESS TUBE CONNECTIONS
SAE AS4318-2002 ADAPTER, FLARED TUBE .375 BULKHEAD TO BOSS, FOR SEAL RING
SAE AS9212A-2007 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A
SAE AS9208B-2007 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9212D-2023 BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER-HEAD, UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A

Danish Standards Foundation, Diffusion plate effect

DS/EN 661:1994 Resilient floor coverings - Determination of the spreading of water
DS/EN 661:1995 Resilient floor coverings - Determination of the spreading of water
DS/EN ISO 20645:2005 Textile fabrics - Determination of antibacterial activity - Agar diffusion plate test
DS/EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
DS/EN 12088:2013 Thermal insulating products for building applications - Determination of long term water absorption by diffusion
DS/EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method

ESDU - Engineering Sciences Data Unit, Diffusion plate effect

STRUCT 02.05.00 A-1983 Diffusion of loads into flat uniform panels.

Lithuanian Standards Office , Diffusion plate effect

LST EN 661-2002 Resilient floor coverings - Determination of the spreading of water
LST EN ISO 20645:2005 Textile fabrics - Determination of antibacterial activity - Agar diffusion plate test (ISO 20645:2004)
LST EN 838-2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
LST EN 12088-2000 Thermal insulating products for building applications - Determination of long term water absorption by diffusion

German Institute for Standardization, Diffusion plate effect

DIN EN 661:1995-01 Resilient floor coverings - Determination of the spreading of water; German version EN 661:1994
DIN EN ISO 20645:2005 Textile fabrics - Determination of antibacterial activity - Agar diffusion plate test (ISO 20645:2004)
DIN EN ISO 23320:2022-08 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO 23320:2022); German version EN ISO 23320:2022
DIN EN 13900-2:2003 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinylchloride by two-roll milling; German version EN 13900-2:2003
DIN EN 13900-3:2003 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling; German version EN 13900-
DIN EN ISO 23320:2021 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO/DIS 23320:2021); German and English version prEN ISO 23320:2021
DIN EN ISO 16536:2019-11 Thermal insulating products for building applications - Determination of long-term water absorption by diffusion (ISO 16536:2019); German version EN ISO 16536:2019
DIN EN 13900-6:2013 Pigments and extenders.Methods of dispersion and assessment of dispersability in plastics.Part 6: Determination by film test; German version EN 13900-6:2012
DIN EN ISO 16536:2019 Thermal insulating products for building applications - Determination of long-term water absorption by diffusion (ISO 16536:2019)
DIN EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
DIN EN 17346:2020-08 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers; German version EN 17346:2020
DIN EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods; German version EN 838:2010
DIN 4160:2000 Bricks for floors, statically inactive
DIN EN 16272-1:2013 Railway applications.Track.Noise barriers and related devices acting on airborne sound propagation.Test method for determining the acoustic performance.Part 1: Intrinsic characteristics.Sound absorption in the laboratory under diffuse sound field conditio
DIN 24531-3:2007 Gratings used as stairtreads - Part 3: Plastic gratings
DIN 24537-3:2007 Gratings used as floor coverings - Part 3: Plastic gratings
DIN 24531-2:2007 Gratings used as stairtreads - Part 2: Sheet metal gratings
DIN 24537-2:2007 Gratings used as floor coverings - Part 2: Sheet metal gratings
DIN 51936:1994 Testing of carbon materials; determination of thermal diffusity at high temperatures by the laser pulse method; solid materials
DIN EN 12088:2013 Thermal insulating products for building applications - Determination of long term water absorption by diffusion; German version EN 12088:2013
DIN 51936:2016-08 Testing of carbonaceous materials - Determination of thermal diffusity at high temperatures by the laser pulse method - Solid materials
DIN 4159:1999 Floor bricks and plasterboards, statically active
DIN 4159:2014 Floor bricks and plasterboards, statically active
DIN 24531-1:2006 Gratings used as stairtreads - Part 1: Metal gratings
DIN 83223:2006-07 Bulb plates, perforated gratings or flooring grids for working floors and walkways
DIN EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance; German version EN 14412:2004
DIN EN ISO 20326:2018 Resilient floor coverings - Specification for floor panels/assembly for loose laying (ISO 20326:2016); German version EN ISO 20326:2018

AENOR, Diffusion plate effect

UNE-EN 661:1995 RESILIENT FLOOR COVERINGS. DETERMINATION OF THE SPREADING OF WATER.
UNE-EN ISO 20645:2005 Textile fabrics - Determination of antibacterial activity - Agar diffusion plate test (ISO 20645:2004)
UNE-EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
UNE-EN 12088:2013 Thermal insulating products for building applications - Determination of long term water absorption by diffusion
UNE 81750:1997 AIR QUALITY. WORKPLACE ATMOSPHERES. DETERMINATION OF STYRENE IN AIR. DIFFUSIVE SAMPLING/SOLVENT DESORPTION/GAS CHROMATOGRAPHIC METHOD.
UNE 81750/1M:1998 AIR QUALITY. WORKPLACE ATMOSPHERES. DETERMINATION OF STYRENE IN AIR. Diffusive sampling/Solvent desorption/Gas chromatography method.

American Society for Testing and Materials (ASTM), Diffusion plate effect

ASTM E2585-09 Standard Practice for Thermal Diffusivity by the Flash Method
ASTM C1486-00 Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
ASTM D6246-01 Standard Practice for Evaluating the Performance of Diffusive Samplers
ASTM D6246-98 Standard Practice for Evaluating the Performance of Diffusive Samplers
ASTM A562/A562M-10(2015) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
ASTM F1460-93(1999) Standard Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems
ASTM F1460/F1460M-18(2022) Standard Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems
ASTM C1556-04 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
ASTM C1556-22 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
ASTM C1556-11a Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
ASTM C1556-11a(2016) Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
ASTM A562/A562M-06 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
ASTM A562/A562M-10 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
ASTM D4597-10(2021) Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
ASTM D4597-10 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
ASTM A562/A562M-90(1996)e1 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
ASTM A562/A562M-90(2001) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
ASTM A562/A562M-10(2021) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
ASTM UOP856-07 Particle Size Distribution of Powders by Laser Light Scattering
ASTM D6619-00 Standard Practice for Incorporating Pigments by High Speed Dispersion
ASTM D6619-00(2006) Standard Practice for Incorporating Pigments by High Speed Dispersion
ASTM E1461-07 Standard Test Method for Thermal Diffusivity by the Flash Method
ASTM B874-96(2023) Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
ASTM E1172-87(2001) Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer
ASTM E2585-09(2015) Standard Practice for Thermal Diffusivity by the Flash Method
ASTM E1461-13 Standard Test Method for Thermal Diffusivity by the Flash Method
ASTM C1556-03 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
ASTM A653/A653M-15 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM A653/A653M-15e1 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM A653/A653M-17 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM D4597-03 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
ASTM D4598-87 Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Liquid Sorbent Diffusional Samplers
ASTM D3902-90(2004)e1 Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas
ASTM D4597-03(2009)e1 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
ASTM C1486-00(2008) Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
ASTM C1486-00(2012) Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
ASTM B874-96(2003) Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
ASTM B874-96 Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
ASTM B874-96(2008) Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
ASTM B875-96(2008) Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
ASTM F2998-14 Guide for Using Fluorescence Microscopy to Quantify the Spread Area of Fixed Cells
ASTM B875-96(2013) Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
ASTM D4597-97 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
ASTM B875-96 Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
ASTM D3902-90(1998) Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas
ASTM D3902-90(2012) Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas
ASTM E3105-17(2023) Standard Specification for Permanent Coatings Used to Mitigate Spread of Radioactive Contamination
ASTM B875-96(2018) Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
ASTM C714-23 Standard Guide for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
ASTM C746-90(1998) Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading
ASTM C1070-01(2007) Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
ASTM C1070-01 Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
ASTM C714-85(2000) Standard Test Method for Thermal Diffusivity of Carbon and Graphite by a Thermal Pulse Method
ASTM E3191-18 Standard Specification for Permanent Foaming Fixatives Used to Mitigate Spread of Radioactive Contamination
ASTM C714-05(2015) Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
ASTM C714-17 Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
ASTM F1906-98(2003) Standard Practice for Evaluation of Immune Responses In Biocompatibility Testing Using ELISA Tests, Lymphocyte, Proliferation, and Cell Migration
ASTM D4282-02 Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
ASTM C714-05 Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
ASTM D4282-15(2022) Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
ASTM C714-05e1 Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
ASTM C714-05(2010) Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
ASTM D4282-02(2010) Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
ASTM D2332-84(2003) Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
ASTM D2332-13 Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
ASTM C1070-01(2014) Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
ASTM D4282-02(2015) Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
ASTM D4282-15 Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
ASTM D6306-17 Standard Guide for Placement and Use of Diffusive Samplers for Gaseous Pollutants in Indoor Air
ASTM E1508-98 Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
ASTM E1508-12 Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
ASTM E1508-12a Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
ASTM E1508-98(2003) Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
ASTM E1508-98(2008) Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
ASTM E1508-12a(2019) Standard guide for quantitative analysis using energy dispersive spectroscopy
ASTM D4001-93(2006) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM D4001-13 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM D6306-98(2003) Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air
ASTM D6306-98 Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air
ASTM E1930-02 Standard Test Method for Examination of Liquid Filled Atmospheric and Low Pressure Metal Storage Tanks Using Acoustic Emission
ASTM E1930-97 Standard Test Method for Examination of Liquid Filled Atmospheric and Low Pressure Metal Storage Tanks Using Acoustic Emission
ASTM E2731-09 Standard Specification for Materials to Mitigate the Spread of Radioactive Contamination after a Radiological Dispersion Event

Professional Standard - Commodity Inspection, Diffusion plate effect

SN/T 1557-2005 Protocol of agar gel immunodiffusion test for fowl pox
SN/T 1165.2-2002 Bluetongue agar immunodiffusion test operating procedures
SN/T 1395.2-2005 Protocol of agar gel immunodiffusion test for avian chlamydiosis
SN/T 1692.1-2006 Protocol of agar-gel immunodiffusion test for African horse sickness
SN/T 1473-2004 Protocol of agar gel immunodiffusion test for rabbit myxomatosis
SN/T 1558-2005 Protocol of agar gel immunodiffusion test for avian encephalomyelitis
SN/T 1556-2005 Protocol of agar gel immunodiffusion test for avian infectious coryza
SN/T 1167-2002 Deer epidemic hemorrhagic disease agar immunodiffusion test operating procedures
SN/T 1555-2005 Protocol of agar gel immunodiffusion test for avian infectious laryngotacheitis
SN/T 1358.2-2005 Protocol of agar gel immuno-diffusion test for equine infectious anaemia
SN/T 1315-2003 Protocol of agar gel immunodiffusion test for enzootic bovine leukosis

KR-KS, Diffusion plate effect

KS K ISO 20645-2015 Textile fabrics－Determination of antibacterial activity－Agar diffusion plate test
KS K ISO 20645-2021 Textile fabrics — Determination of antibacterial activity —Agar diffusion plate test
KS I ISO 16107-2009 Workplace atmospheres－Protocol for evaluating the performance of diffusive samplers
KS B 3061-2022 Clamps for welding and plate work

United States Navy, Diffusion plate effect

NAVY MIL-DTL-22576 A-2013 TERMINALS, AIR, DIFFUSING, CIRCULAR, FOR SHIPBOARD USE

Korean Agency for Technology and Standards (KATS), Diffusion plate effect

KS K ISO 20645:2010 Textile fabrics-Determination of antibacterial activity-Agar diffusion plate test
KS K ISO 20645:2015 Textile fabrics-Determination of antibacterial activity-Agar diffusion plate test
KS K ISO 20645:2021 Textile fabrics — Determination of antibacterial activity —Agar diffusion plate test
KS I ISO 16107:2009 Workplace atmospheres-Protocol for evaluating the performance of diffusive samplers
KS B 6404-2011(2021) Steel plate radiator for heating
KS B 6416-2006(2021) Test for radiation capacity of cast iron radiators and steel plate radiators for heating
KS I ISO 16017-2:2005 Indoor, ambient and workplace air-Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography-Part 2:Diffusive sampling
KS I ISO 6145-8:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 8:Diffusion method
KS I ISO 6145-8:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 8：Diffusion method
KS T ISO 2326-2006(2021) Continuous mechanical handling equipment for loose bulk materials — Aeroslides
KS I ISO 6145-8-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 8：Diffusion method

Association Francaise de Normalisation, Diffusion plate effect

NF G39-014*NF EN ISO 20645:2005 Textiles fabrics - Determination of the antibacterial activity - Agar diffusion plate test.
NF T76-401*NF EN 1720:1998 Adhesives for paper and board, packaging and disposable sanitary products. Determination of dispersability.
NF Q03-059:1975 Paper, board and pulps . Use of the perfect reflecting diffuser as ultimate reference in the measurement of brightness and diffuse reflectance factor.
NF EN ISO 20645:2005 Étoffes - Contrôle de l'activité antibactérienne - Essai de diffusion sur plaques de gélose
NF T31-310-2:2003 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2 : determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling.
NF T31-310-4:2004 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 4 : determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling.
NF T31-310-6:2012 Pigments and extenders - Methods of dispersion and assessment of dispersability in plastics - Part 6: determination by film test
NF EN ISO 23320:2022 Air des lieux de travail - Gazes et vapeurs - Exigences pour l'évaluation des procédures pour le mesurage à l'aide de dispositifs de prélèvement par diffusion
NF T31-310-5:2005 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5 : determination by filter pressure value test.
NF T90-347:1990 Testing water. Dispersive products. Evaluation in an aqueous medium of the inhibitory action on petroleum biodegradability.
NF X43-278:1996 Workplace atmospheres. Diffusive samplers for the determination of gases and vapours. Requirements and test methods.
NF T31-310-3:2003 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3 : determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling.
NF EN ISO 16536:2019 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de l'absorption d'eau à long terme par diffusion
NF ISO 16000-4:2012 Air intérieur - Partie 4 : dosage du formaldéhyde - Méthode par échantillonnage diffusif
NF P85-512:1985 Sealants. Plastic type mastics for packing seals. Testing dispersion of constituants.
FD CEN/TR 17519:2020 Sols sportifs - Installations sportives en gazon synthétique - Recommandations pour limiter la dispersion des matériaux de remplissage dans l'environnement
NF P75-217:2013 Thermal insulating products for building applications - Determination of long term water absorption by diffusion
NF P75-217*NF EN ISO 16536:2019 Thermal insulating products for building applications - Determination of long-term water absorption by diffusion
NF X43-280:2013 Air des lieux de travail - Évaluation de l.exposition aux agents chimiques et biologiques sur le lieu de travail - Prélèvement par diffusion de gaz et vapeurs
NF P62-309*NF EN ISO 20326:2018 Resilient floor coverings - Specification for floor panels/assembly for loose laying
NF F90-272-3-1*NF EN 16272-3-1:2012 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-1 : normalized railway noise spectrum and single number ratings for diffuse field applic
NF X43-028*NF EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
NF X43-142*NF EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive Samplers
NF EN 12238:2001 Ventilation des bâtiments - Bouches d'air - Essais aérodynamiques et caractérisation pour applications en diffusion à mélange
NF EN 16339:2013 Air ambiant - Méthode pour la détermination de la concentration du dioxyde d'azote au moyen d'échantillonneurs par diffusion
NF EN 17346:2020 Air ambiant - Méthode normalisée pour la détermination de la concentration en ammoniac au moyen d'échantillonneurs par diffusion
NF EN ISO 8780-5:1995 Pigments et matières de charge - Méthodes de dispersion pour évaluer la dispersibilité - Partie 5 : dispersion à l'aide d'une broyeuse automatique à plateaux.
NF F90-272-2*NF EN 16272-2:2013 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 2: intrinsic characteristics - Airborne sound insulation in the laboratory under diffuse s
NF X43-029-4*NF EN 14662-4:2005 Ambient air quality - Standard method for the measurement of benzene concentrations - Part 4 : diffusive sampling followed by thermal desorption and gas chromatography
NF A81-305:1975 COVERED ELECTRODES FOR MANUAL ARC WELDING PREPARATION OF AN ALL WELD METAL SAMPLE FOR MEASURING DIFFUSIBLE HYDROGEN.
NF EN 640:1995 Tuyaux pression en béton armé et tuyaux pression à armature diffusé (sans âme en tôle), y compris joints et pièces spéciales
NF T45-018:1981 RAW MATERIALS FOR THE RUBBER INDUSTRY. VULCANISATION ACCELERATORS IN DISPERSIONS OR PRINCIPAL MIXTURES. METHOD OF TESTING.
NF EN ISO 6145-8:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 8 : méthode par diffusion
NF EN 2004-5:1993 Série aérospatiale - Méthodes d'essais applicables aux produits en aluminium et alliages d'aluminium - Partie 5 : mesure de l'épaisseur du placage et de la diffusion du cuivre dans le placage des demi-produits plaques.
NF X20-205-8*NF EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8 : diffusion method.
NF EN 15254-7:2018 Application étendue des résultats d'essais de résistance au feu - Plafonds non porteurs - Partie 7 : Panneaux sandwiches métalliques pour la construction
NF F90-272-1*NF EN 16272-1:2013 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 1: intrinsic characteristics - Sound absorption in the laboratory under diffuse sound fiel
NF B54-090:1989 WOOD. PANELLING. GENERAL DEFINITIONS OF THE ROLES OF PANELLING. SPECIFICATIONS.
NF X43-063*NF EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentration of gases and vapours - Guide for selection, use and maintenance

International Organization for Standardization (ISO), Diffusion plate effect

ISO 20645:2004 Textile fabrics - Determination of antibacterial activity - Agar diffusion plate test
ISO 16107:2007 Workplace atmospheres - Protocol for evaluating the performance of diffusive samplers
ISO 23320:2022 Workplace air — Gases and vapours — Requirements for evaluation of measuring procedures using diffusive samplers
ISO 23900-6:2015 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 6: Determination by film test
ISO 23900-2:2015 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling
ISO 23900-3:2015 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling
ISO 23900-5:2015 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test
ISO 9239-1:1997/Cor 2:1998 Reaction to fire tests - Horizontal surface spread of flame of floor-covering systems - Part 1: Flame spread using a radiant heat ignition source - Technical Corrigendum 2
ISO 16536:2019 Thermal insulating products for building applications — Determination of long-term water absorption by diffusion
ISO 9932:1990 Paper and board; determination of water vapour transmission rate of sheet materials; dynamic sweep and static gas methods
ISO 9932:2021 Paper and board - Determination of water vapour transmission rate of sheet materials - Dynamic sweep and static gas methods
ISO/CD 13647 Water quality — Enumeration of culturable microorganisms — Colony count by spread plate inoculation on R2A medium
ISO 14372:2011 Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling
ISO 6145-8:2005 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method
ISO 16536:2012 Thermal insulating products for building applications - Determination of long-term water absorption by diffusion

未注明发布机构, Diffusion plate effect

KS K ISO 20645_2004:2015 Textiles. Determination of antibacterial activity. Agar diffusion plate test
BS EN ISO 6145-8:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 8 : Diffusion method

British Standards Institution (BSI), Diffusion plate effect

BS ISO 16107:2008 Workplace atmospheres - Protocol for evaluating the performance of diffusive samplers
BS ISO 23900-6:2015 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination by film test
BS EN 13900-5:2005 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Determination by filter pressure value test
BS EN 13900-2:2003 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling
BS EN 13900-4:2004 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling
BS ISO 23900-2:2015 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling
BS ISO 23900-4:2015 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling
BS EN ISO 23320:2022 Workplace air. Gases and vapours. Requirements for evaluation of measuring procedures using diffusive samplers
BS EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
BS ISO 23900-5:2015 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination by filter pressure value test
BS EN 16272-1:2012 Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance. Intrinsic characteristics. Sound absorption in the laboratory under diffuse sound field conditions
BS ISO 23900-3:2015 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling
BS EN 13900-3:2003 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling
BS EN ISO 23900-2:2018 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling
21/30410828 DC BS ENISO 23320. Workplace air. Gases and vapours. Requirements for evaluation of measuring procedures using diffusive samplers
BS EN ISO 16536:2019 Thermal insulating products for building applications. Determination of long-term water absorption by diffusion
BS ISO 9239-1:1998 Reaction to fire tests. Horizontal surface spread of flame on floor-covering systems. Flame spread using a radiant heat ignition source
BS ISO 16200-2:2004 Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Diffusive sampling method
BS 3483-C7:1980 Methods for testing pigments for paints - Comparison of resistance to bleeding
BS EN 17346:2020 Ambient air. Standard method for the determination of the concentration of ammonia using diffusive samplers
BS EN ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Diffusive sampling
BS EN ISO 6145-8:2005 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Diffusion method
BS EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Diffusion method
BS EN 16272-3-1:2012 Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance. Normalized railway noise spectrum and single number ratings for diffuse field applications
BS EN 16272-2:2012 Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance. Intrinsic characteristics. Airborne sound insulation in the laboratory under diffuse sound field co
BS ISO 16200-2:2000 Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Diffusive sampling method
BS EN 15254-7:2018 Extended application of results from fire resistance tests. Non-loadbearing ceilings - Metal sandwich panel construction
BS EN 14412:2004 Indoor air quality - Diffusive samplers the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
BS EN 14412:2004(2009) Indoor air quality - Diffusive samplers the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
BS EN ISO 6179:2010 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique)
BS EN 15882-2:2015 Extended application of results from fire resistance tests for service installations. Fire dampers
BS ISO 22007-7:2023 Plastics. Determination of thermal conductivity and thermal diffusivity - Transient measurement of thermal effusivity using a plane heat source

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Diffusion plate effect

GB/T 35516-2017 Light diffusion polycarbonate for LED luminaire

American National Standards Institute （ANSI), Diffusion plate effect

ANSI/ASHRAE 113-2013 Method of Testing for Room Air Diffusion
ANSI/TAPPI T525 om-2012 Diffuse brightness of paper, paperboard and pulp (d/0) - Ultraviolet level C
ANSI/ISEA 104-1998 Air Sampling Devices - Diffusive Type for Gases and Vapors in Working Environments
ANSI/ISEA 104-1998(R2009) American National Standard for Air Sampling Devices - Diffusive Type for Gases and Vapors in Working Environments
ANSI/ASCE/EWRI 44-2013 Standard Practice for the Design and Operation of Supercooled Fog Dispersal Projects
ANSI/ASTM E2058a:2013 Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)

NO-SN, Diffusion plate effect

NS 4713-1990 Water analysis - Fluorescent pseudomonads - Membrane filter and spreadplate methods

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Diffusion plate effect

ASHRAE QC-06-045-2006 Air Distribution in a Room with Ceiling-Mounted Diffusers - Comparison with Wall-Mounted Diffuser@ Vertical Ventilation@ and Displacement Ventilation
ASHRAE 3887-1995 Comparison of Room Air Motion in a Full Size Test Room Using Different Diffusers and Operating Conditions
ASHRAE 3992-1996 Experimental Results from Single-Pipe Diffusers for Stratified Thermal Energy Storage
ASHRAE 3703-1993 Effect of Air Diffuser Layout on the Ventilation Conditions of a Workstation - Part I: Air Distribution Patterns
ASHRAE AB-10-023-2010 Evaluation of CFD for Simulating Air Pollutant Dispersion Around Buildings
ASHRAE 4251-1999 Full-Scale Thermal Performance Tests of Alternative Diffusers When Operating with Cold Air
ASHRAE 3704-1993 Effect of Air Diffuser Layout on the Ventilation Conditions of a Workstation - Part II: Air Change Efficiency and Ventilation Efficiency
ASHRAE 4290-1999 Effects of Pen Partition and Diffuser Type on Occupied Zone Air Velocities in Typical Swine Buildings

Taiwan Provincial Standard of the People's Republic of China, Diffusion plate effect

CNS 10639-1983 Polymer Dispersions for Cement Nodifier
CNS 12885-2005 Pulp, paper and paperboard - Measurement of diffuse blue reflectance factor (ISO brightness)
CNS 14931-2005 Paper and paperboard - Determination of opacity（paper backing）- Diffuse reflectance method
CNS 13417-1994 Method of Test for Brightness of Mineral Fillers and Pigments (Diffuse Blue Reflectance) for Paper Making

Association of German Mechanical Engineers, Diffusion plate effect

VDI 3869 Blatt 3-2010 Measurement of ammonia in ambient air - Sampling with diffusion separators (denuders) - Photometric or ion chromatographic analysis
VDI 3783 Blatt 12-2000 Environmental meteorology - Physical modelling of flow and dispersion processes in the atmospheric boundary layer - Application of wind tunnels

RU-GOST R, Diffusion plate effect

GOST ISO 20645-2014 Textile products. Determination of antibacterial activity. Diffusive test in agar plate
GOST 20549-1975 Vacuum diffusion welding of working elements of separating and shape forming dies. Typical technological process
GOST R 57411-2017 Unified system of corrosion and ageing protection. Corrosion protection of parts made of cast iron or steels by diffusion processing of zinc. General requirements to flow process
GOST 10223-1997 Gravimetric filling instruments. General technical requirements
GOST 10223-1982 Scale weighers of proportioning action scales and scale weighers of continuous action. General technical requirements

Professional Standard - Aviation, Diffusion plate effect

HB/Z 31-1982 General process specification for nickel-cadmium diffusion coating
HB 741-1992 Template and reference template used for slot milling cutter of expanding drill of four-tooth-set type For inspecting HB 734-92 slot milling cutter
HB 741-1979 Four-tooth sleeve type reaming drilling slot milling cutter sample and proofreading sample testing HB 734-92 slot milling cutter
HB 4601-1992 Template and reference template for expanding drill slot milling cutter for machining aluminum alloy For inspecting HB 4600-92 slot milling cutter

National Aeronautics and Space Administration (NASA), Diffusion plate effect

NASA NACA-TN-3996-1957 Investigation of a short-annular-diffuser configuration utilizing suction as a means of boundary-layer control
NASA NACA-RM-L54K18-1955 Investigation of two short annular diffuser configurations utilizing section and injection as a means of boundary-layer control
NASA NACA-TN-4309-1958 Use of short flat vanes for producing efficient wide-angle two-dimensional subsonic diffusers

工业和信息化部, Diffusion plate effect

QB/T 1843-2015 Diffusion absorption refrigeration box for household refrigeration appliances
HG/T 5507-2018 Optical functional thin film liquid crystal display backlight module uses diffusion film
XB/T 239-2022 Terbium fluoride and dysprosium fluoride for grain boundary diffusion sintered NdFeB permanent magnet materials

API - American Petroleum Institute, Diffusion plate effect

API 4065-1970 A PRACTICAL@ MULTIPURPOSE URBAN DIFFUSION MODEL FOR CARBON MONOXIDE
API PUBL 952-1977 Gaussian Dispersion Models Applicable to Refinery Emissions
API TR IOSC-004-1997 Putting Dispersants to Work: Overcoming Obstacles
API PUBL 4457-1987 API Evaluation of Urban Dispersion Models with the St. Louis Raps Data Base
API PUBL 4425-1986 Role of Chemical Dispersants in Oil Spill Control
API PUBL 961-1986 Validation of Heavy Gas Dispersion Models with Experimental Results Of Thorney Island Trials Volume II-Appendices
API DR19-1986 ANALYSIS OF THE OFFSHORE AND COASTAL DISPERSION (OCD) MODEL (VERSION 2) FOR AIR POLLUTION COMPUTATIONS

European Committee for Standardization (CEN), Diffusion plate effect

EN 13900-2:2003 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinylchloride by two-roll milling
EN ISO 23320:2022 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO 23320:2022)
EN 13900-5:2005 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test
EN ISO 23900-2:2018 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling
EN 838:1995 Workplace Atmospheres - Diffusive Samplers for the Determination of Gases and Vapours - Requirements and Test Methods
EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
prEN 838-1992 Workplace atmospheres; diffusive samplers for the determination of gases and vapours; requirements and test methods
EN 12088:1997 Thermal Insulating Products for Building Applications - Determination of Long Term Water Absorption by Diffusion
prEN ISO 23320:2021 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO/DIS 23320:2021)
EN 12088:2013 Thermal insulating products for building applications - Determination of long term water absorption by diffusion
EN ISO 16536:2019 Thermal insulating products for building applications - Determination of long-term water absorption by diffusion (ISO 16536:2019)
EN 13900-3:2003 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling
EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
EN ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling
EN 61094-5:2001 Measurement microphones Part 5: Methods for pressure calibration of working standard microphones by comparison

ES-AENOR, Diffusion plate effect

UNE 57-097 Pt.1-1991
UNE 68-073-1986
UNE 57-062-1994 Paper and board. Measurement of diffuse blue reflectance factor (UNE brightness)
UNE 55-801-1985
UNE 53-410-1987

American Society of Mechanical Engineers (ASME), Diffusion plate effect

ASME SEC II A SA-562/SA-562M-2001 Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings ASTM A562/A562M-90
ASME MFC-21.2-2010(R2018) Measurement of Fluid Flow by Means of Thermal Dispersion Mass Flowmeters

ES-UNE, Diffusion plate effect

UNE-EN ISO 23320:2023 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO 23320:2022)
UNE-EN ISO 16536:2020 Thermal insulating products for building applications - Determination of long-term water absorption by diffusion (ISO 16536:2019)
UNE-EN 17346:2021 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers

ZA-SANS, Diffusion plate effect

SANS 6176:2004 Fibreboard - Determination of linear expansion as a result of water absorption

Professional Standard - Electron, Diffusion plate effect

SJ 2065-1982 Testing method for diffusion furnace for semiconductor device manufacturing
SJ 1794-1981 General specification for diffusion furnace for semiconductor device manufacturing

Professional Standard - Building Materials, Diffusion plate effect

JC/T 2066-2011 Quartz glass diffusion tubes for silicon for solar cell

CEN - European Committee for Standardization, Diffusion plate effect

EN ISO 23900-6:2018 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 6: Determination by film test
EN ISO 23900-3:2018 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling
EN ISO 23900-5:2018 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test

Professional Standard - Aerospace, Diffusion plate effect

QJ 3216.1-2005 Manganese coatings for vacuum diffusion brazing Part 1: Specification
QJ 3216.2-2006 Manganese coatings for vacuum diffusion brazing Part 2: Process requirements
QJ 3216.3-2007 Manganese coatings for vacuum diffusion brazing - Part 3: Analytical methods for manganese plating solutions

IETF - Internet Engineering Task Force, Diffusion plate effect

RFC 3894-2004 Sieve Extension: Copying Without Side Effects
RFC 7260-2014 GMPLS RSVP-TE Extensions for Operations@ Administration@ and Maintenance (OAM) Configuration
RFC 8330-2018 OSPF Traffic Engineering (OSPF-TE) Link Availability Extension for Links with Variable Discrete Bandwidth

GB-REG, Diffusion plate effect

REG NASA-TN-D-7575-1974 Performance of an asymmetric short annular diffuser with a nondiverging inner wall using suction

RO-ASRO, Diffusion plate effect

STAS 4394-1985 GENERAL USE TD TYPE BURNERs WITH DIFFUZER TUBE AND INDUCED AIR FOR NATURAL GASES
STAS 6875-1963
STAS 7513/1-1974 AGGLOMERATED CORK BOARDS FOR GASKETS General requirements
STAS 7004-1989 BEECH PLYWOOD FOR EXTERNAL WORKS

AT-ON, Diffusion plate effect

OENORM EN ISO 23320:2021 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO/DIS 23320:2021)
OENORM EN ISO 20326:2020 Resilient floor coverings - Specification for floor panels/assembly for loose laying (ISO 20326:2016 + Amd.1:2020) (consolidated version)
ONORM M 7427-1989 Thermally operated flue gas dampers for gas appliances

AR-IRAM, Diffusion plate effect

Japanese Industrial Standards Committee (JISC), Diffusion plate effect

JIS H 7801:2005 Method for measuring thermal diffusivity of metals by the laser flash method
JIS A 1402:1977 Test for radiation capacity of cast iron radiators and steel plate radiators for heating
JIS R 1689:2011 Determination of thermal diffusivity of fine ceramic films by pulsed light heating thermoreflectance method
JIS R 1689:2018 Determination of thermal diffusivity of fine ceramic films by pulsed light heating thermoreflectance method
JIS R 1667:2005 Determination of thermal diffusivity of continuous fiber-reinforced ceramic matrix composites by the laser flash method
JIS K 0400-38-40:1999 Water quality -- Determination of cyanide -- Part 4: Determination of cyanide by diffusion at pH 6

Military Standard of the People's Republic of China-General Armament Department, Diffusion plate effect

GJB 1799-1993 Chemical analysis method of phosphorus diffusion source for large scale integrated circuits
GJB 5482-2005 General requirements for information management of small arms mobilization, production technology reserves and proliferation

Professional Standard - Hygiene , Diffusion plate effect

WS/T 157-1999 Workplace air.Determination of chlorobenzene.Charcoal diffusive sampler, solvent desorption and gas chromatographic method
WS/T 231-2002 Protocols for the evaluation of dehydrated Mueller-Hinton agar in the disk diffusion procedure for antimicrobial susceptibility testing

(U.S.) Ford Automotive Standards, Diffusion plate effect

FORD ESA-M10A82-A1-2012 POWDER METAL, STEEL - DIFFUSION BONDED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M10A82-A1-2003 POWDER METAL, STEEL - DIFFUSION BONDED ***TO BE USED WITH FORD WSS-M99P1111-A***

Canadian General Standards Board （CGSB), Diffusion plate effect

CGSB 9.0 NO. 14-98-CAN/CGSB-1998 Methods of Testing Pulp and Paper Pulp, Paper and Paperboard - Colour Measurement with a Diffuse/Zero Geometry Tristimulus Reflectance Meter

Professional Standard - Light Industry, Diffusion plate effect

QB/T 1843-1993 Household refrigerating appliances Diffusion and absorption refrigerators and freezers
QB 1842-1993 Safety requirement for household diffusion and absorption refrigerators and freezers
QB/T 1842-1993 Safety requirements for diffusion absorption refrigerators and refrigeration-freezers for household use

Standard Association of Australia （SAA）, Diffusion plate effect

AS 2986.2:2003 Workplace air quality - Sampling and anlysis of volatile organic compounds by solvent desorption/gas chromatography - Diffusive sampling method

IT-UNI, Diffusion plate effect

UNI EN ISO 20326:2020 Resilient floor coverings - Specification for floor panels/assembly for loose laying

CZ-CSN, Diffusion plate effect

CSN 22 1300-1955

CH-SNV, Diffusion plate effect

SN EN 17346-2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers

PL-PKN, Diffusion plate effect

PN-EN 17346-2020-11 E Ambient air -- Standard method for the determination of the concentration of ammonia using diffusive samplers
PN BN 7127-02-1966

IX-FAO, Diffusion plate effect

CAC/RCP 36-2015 Code of Practice for the Storage and Transport of Edible Oils and Fats in Bulk
CAC/RCP 36-1987(En) Recommended Code of Practice for Storage and Transportation of Bulk Edible Fats and Oils
CAC/RCP 36-1987,Rev.3-2005(Ch) Recommended Code of Practice for Storage and Transportation of Bulk Edible Fats and Oils

Society of Motion Picture and Television Engineers (SMPTE), Diffusion plate effect

SMPTE ST 2067-21-2014 Interoperable Master Format - Application #2 Extended

American Institute of Steel Construction (AISC), Diffusion plate effect

AISC 804-2004 Extended End-Plate Moment Connections.Seismic and Wind Application
AISC DESIGN GUIDE 4 ERTA-2012 Extended End-Plate Moment Connections Seismic and Wind Applications (2nd Edition)

AIA/NAS - Aerospace Industries Association of America Inc., Diffusion plate effect

NAS248-1947 Union-Bulkhead Universal & Flared Tube Plastic (Rev 2)
NAS254-1947 Elbow - 90 Degree Bulkhead Universal & Flared Tube@ Plastic (Rev 2)
NAS250-1947 Union - Hose@ Flared Tube@ Bulkhead & Universal@ Plastic (Rev 2)

Indonesia Standards, Diffusion plate effect

SNI 05-3308-1994 Press working tools stops for cropping

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Diffusion plate effect

GB/T 32064-2015 Test method for thermal conductivity and thermal diffusivity of building materials with transient plane heat source
GB/T 5275.8-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 8:Diffusion method

North Atlantic Treaty Organization Standards Agency, Diffusion plate effect

STANAG 3778-2008 PERFORMANCE CRITERIA FOR HONEYCOMB PAPER USED AS ENERGY DISSIPATING MATERIAL

U.S. Air Force, Diffusion plate effect

AIR FORCE MIL-B-87162 A NOTICE 1-1999 BAFFLE MATERIAL, EXPLOSION SUPPRESSION, EXPANDED ALUMINUM MESH, FOR AIRCRAFT FUEL TANKS
AIR FORCE MIL-B-87162 A-1994 BAFFLE MATERIAL, EXPLOSION SUPPRESSION, EXPANDED ALUMINUM MESH, FOR AIRCRAFT FUEL TANKS

Military Standards (MIL-STD), Diffusion plate effect

DOD MIL-STD-3011 CONT. DIST.-2002 INTEROPERABILITY STANDARD FOR THE JOINT RANGE EXTENSION APPLICATION PROTOCOL (JREAP)

Professional Standard - Nuclear Industry, Diffusion plate effect

EJ 34-1975 Tempered glass panel for working box window

Aerospace Industries Association, Diffusion plate effect

AIA NAS 254-1947 (Inactive)Elbow - 90 Degree Bulkhead Universal & Flared Tube, Plastic (Rev. 2)
AIA NAS 250-1947 (Inactive)Union - Hose, Flared Tube, Bulkhead & Universal, Plastic (Rev. 2)
AIA NAS 255-1947 (Inactive)Elbow-Hose, Flared Tube, Bulkhead & Universal, 90 Degree, Plastic (Rev. 2)

IN-BIS, Diffusion plate effect

IS 9442-1980

GOSTR, Diffusion plate effect

GOST R 57830-2017 Composites. Determination of thermal conductivity and thermal diffusivity by modulated temperature differential scanning calorimetry

国家市场监督管理总局、中国国家标准化管理委员会, Diffusion plate effect

GB/T 37324-2019 Multifunctional manipulator for deck operations

HU-MSZT, Diffusion plate effect

AASHTO - American Association of State Highway and Transportation Officials, Diffusion plate effect

DIVISION I 11.3-1996 Soil-Metal Plate Interaction Systems

International Telecommunication Union (ITU), Diffusion plate effect

ITU-R BT.1728 SPANISH-2005 Guidance on the use of flat panel displays in television production and postproduction Orientaciones sobre la utilizaci髇 de monitores de pantalla plana en la producci髇 y postproducci髇 de televisi髇

SG-SPRING SG, Diffusion plate effect

CP 34-1985 CODE OF PRACTICE FOR Bulk Liquid Oxygen Storage Installations On User Premises

Institute of Electrical and Electronics Engineers (IEEE), Diffusion plate effect

ST 2067-21:2014 ST 2067-21:2014 - SMPTE Standard - Interoperable Master Format — Application #2 Extended

European Committee for Electrotechnical Standardization（CENELEC）, Diffusion plate effect

EN 61094-5:2016 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison