ZH
RU
ES

centrifuge concentration

centrifuge concentration, Total:344 items.

In the international standard classification, centrifuge concentration involves: Geology. Meteorology. Hydrology, Analytical chemistry, Terminology (principles and coordination), Construction materials, Raw materials for rubber and plastics, Nuclear energy engineering, Rubber, Non-metalliferous minerals, Particle size analysis. Sieving, Farming and forestry, Pesticides and other agrochemicals, Products of the textile industry, Adhesives, Photography, Meat, meat products and other animal produce, Air quality, Paints and varnishes, Aircraft and space vehicles in general, Valves, Equipment for processing of minerals, Earthworks. Excavations. Foundation construction. Underground works, Testing of metals, Laboratory medicine, Semiconducting materials, Chipless working equipment, Wood-based panels, Power stations in general, Products of the chemical industry, Aerospace fluid systems and components, Astronomy. Geodesy. Geography, Body care equipment, Pulps, Wastes, Protection against fire, Paint ingredients, Test conditions and procedures in general, On-board equipment and instruments, Mechanical testing, Paper and board, Pumps, Organic chemicals, Water quality, Microbiology, Materials for aerospace construction, Measurement of time, velocity, acceleration, angular velocity, Fruits. Vegetables, Beverages, Semiconductor devices, Biology. Botany. Zoology, Aerospace electric equipment and systems, Metrology and measurement in general, Road engineering, Ceramics, Vocabularies, Internal combustion engines, Environmental testing, Glass, Soil quality. Pedology.

CZ-CSN, centrifuge concentration

CSN 65 9037-1984 Vat dyestuffs. Metods of determination: — point of congelation — stability at centrifuging — concentration of hydrogen ions [pH - value)
CSN 70 4314-1988 Test tubes centrifugation with scale
CSN 68 4154-1989 Concentration of the inpurities by he ion exchange method
CSN 68 1102-1980 Tlie syntheliral detergents. elevmirialion of conuentration of the ydrogen ions (pH)

工业和信息化部, centrifuge concentration

HG/T 5450-2018 Centrifugal compressor for steam concentration process
YS/T 1065.2-2015 Methods for determination of physical properties of zeolites Part 2: Determination of particle size Centrifugal sedimentation method

中国气象局, centrifuge concentration

QX/T 380-2017 Air negative (oxygen) ion concentration level

ES-AENOR, centrifuge concentration

German Institute for Standardization, centrifuge concentration

DIN 58970-2:1982 Laboratory centrifuges; centrifuge tubes for relative centrifugal acceleration up to 4000
DIN ISO 2004:2012 Natural rubber latex concentrate - Centrifuged or creamed, ammonia-preserved types - Specifications (ISO 2004:2010)
DIN EN ISO 19448:2018-04 Dentistry - Analysis of Fluoride Concentration in Aqueous Solutions by use of Fluoride-Ion Selective Electrode (ISO 19448:2018); German version EN ISO 19448:2018
DIN EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method; German version EN 12619:2013
DIN 66120:1983 Particle size analysis; size analysis by air classification with centrifugal counterflow classifier
DIN 66120:2016 Particle size analysis - Size analysis by air classification with centrifugal counterflow classifier
DIN 66120:2016-10 Particle size analysis - Size analysis by air classification with centrifugal counterflow classifier
DIN EN ISO 19448:2018 Dentistry - Analysis of Fluoride Concentration in Aqueous Solutions by use of Fluoride-Ion Selective Electrode (ISO 19448:2018)
DIN EN 3841-508:2005-09 Aerospace series - Circuit breakers - Test methods - Part 508: Centrifugal acceleration; German and English version EN 3841-508:2004 / Note: Applies in conjunction with DIN EN 3841-100 (2005-09).
DIN EN ISO 25140:2010-12 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010); German version EN ISO 25140:2010
DIN EN 12619:2013-04 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method; German version EN 12619:2013
DIN 66111 Bb.1:1989 Particle size analysis; sedimention analysis; principles; evaluation equations for determination of quantities in the field of centrifugal force
DIN 66111 Beiblatt 1:1989-02 Particle size analysis; sedimention analysis; principles; evaluation equations for determination of quantities in the field of centrifugal force
DIN EN ISO 5198:1999-12 Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class (ISO 5198:1987); German version EN ISO 5198:1998
DIN EN ISO 8299:2021-04 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019); English version EN ISO 8299:2021

Group Standards of the People's Republic of China, centrifuge concentration

T/CNRA 001-2020 Naturalrubber latex concentrate - Non-ammonia-preserved types - Specifications
T/CMSA 0029-2022 Air negative oxygen ion concentration level icon
T/GIEHA 012-2019 Indoor environmental ecological negative (oxygen) ion concentration level
T/SZJL 4-2023 Determination of glucose concentration in human saliva－Ion chromatography
T/CASAS 010-2019 Determination of Trace Impurities Concentration and Distribution in GaN Materials by Secondary Ion Mass Spectrometry
T/CASAS 009-2019 Determination of Trace Impurities Concentration and Distribution in Semi-insulating SiC Materials by Secondary Ion Mass Spectrometry

Professional Standard - Agriculture, centrifuge concentration

GB 8289-1987 Specifications of Natural Concentrated Latex Ammonia Preserved Centrifugal Latex
NY/T 4224-2022 Concentrated Natural Latex Ammonia-Free Preservation Centrifugal Latex Specifications
NY/T 923-2004 Natural rubber latex concentrate-Centrifuged ammonia preserved types for film production
NY/T 924-2004 Natural rubber latex concentrate-Centrifuged ammonia preserved types technical rules for production
NY/T 924-2012 Natural rubber concentrate.Technical code for processing of centrifuged ammonia.preserved latex
GB 3776.2-1983 Method for Determination of Hydrogen Ion Concentration of Pesticide Emulsifier
NY/T 1813-2009 Natural rubber latex concentrate Centrifuged low protein, ammonia-preserved types-technical rules for production

HU-MSZT, centrifuge concentration

Professional Standard - Building Materials, centrifuge concentration

JC/T 2110-2012 Indoor air ion concentration test method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, centrifuge concentration

GB/T 8289-2001 Natural rubber latex concentrate--Centrifuged or creamed, ammonia-preserved types--Specification
GB/T 8289-2008 Natural rubber latex concentrate. Centrifuged or creamed, ammonia-preserved types. Speecification
GB/T 8289-2023 Concentrated natural latex ammonia preservation centrifugal or cream latex specifications
GB/T 8289-2016 Natural rubber latex concentrate.Centrifuged or creamed, ammonia-preserved types.Specifications
GB/T 42342.2-2023 Liquid Phase Centrifugal Sedimentation Method for Particle Size Distribution Part 2: Photoelectric Centrifugal Method
GB/T 3776.2-1983 Method of hydrogen ion concentration determination for pesticide emulsifiers
GB/T 28695-2012 Standard of strength calculation for centrifugal drum
GB/T 8757-1988 Determination of carrier concentration in gallium arsenide by the plasma resonance minimum
GB/T 8757-2006 Determination of carrier concentration in gallium arsenide by the plasma resonance minimum
GB/T 11276-1989 Cationic surface active agents(hydrochlorides and hydrobromides)--Determination of critical micellization concentration--Method by measurement of counter ion activity
GB/T 11278-1989 Anionic and non-ionic surface active agents--Determination of the critical micellization concentration--Method by measuring surface tension with ring
GB/T 10305-1988 Test method for particle distribution of cathode carbonates by centrifugation sedimentation
GB/T 11188-1989 Determination of density of pigments(using a centrifuge to remove entrained air)
GB/T 15434-1995 Ambient air--Determination of the mass concentration of fluoride--Method by filter sampling and fluorine ion- selective electrode analysis
GB/T 19496-2004 Determinating of the compressive strength of spun high-strength concrete cores
GB/T 20176-2006 Surface chemical analysis.Secondary-ion mass spectrometry.Determination of boron atomic concentration in silicon using uniformly doped materials

RO-ASRO, centrifuge concentration

STAS 9843-1980 NATURAL RUBBER LATEX CENTRIFUGED OR CREAMED AMMONIA PRESERYED Specifications

Professional Standard - Nuclear Industry, centrifuge concentration

EJ/T 1089-1998 Inspection procedure of nuclear material control and accounting for uranium centrifuge enrichment plants
EJ/T 20230-2018 Evaluation Method of Nuclear Material Accounting Unbalance Difference in Centrifugal Uranium Enrichment Facility
EJ/T 20053.3-2014 Specifications for dedicated sensor in uranium enrichment operation using gas centrifugal technology.Part 3: sensor for measuring light impurities
EJ/T 20053.2-2014 Specifications for dedicated sensor in uranium enrichment operation using gas centrifugal technology.Part 2: sensor for protecting against flowing direction
EJ/T 20054.1-2014 Specifications for dedicated power control panel in uraniun enrichment operation using gas centrifugal technology.Part 1: power control panel for valves
EJ/T 20053.1-2014 Specifications for dedicated sensor in uranium enrichment operation using gas centrifugal technology.Part 1: sensor for protecting against accidental light impurities
EJ/T 20054.2-2014 Specifications for dedicated power control panel in uraniun enrichment operation using gas centrifugal technology.Part 2: power control panel for compressors

RU-GOST R, centrifuge concentration

GOST 19609.19-1989 Concentrated kaolin. Method for determination of hydrogen ions concentration of water suspension
GOST R 50729-1995 Textiles. Limit permissible concentration of free formaldehyde
GOST 17818.6-1990 Graphite. Method for determination of hydrogen ions concentration of water suspension and water extract
GOST 25183.9-1982 Photographic gelatine. Method of determination of hydrogen ions concentration
GOST 30386-1995 Textiles. Maximum permissible concentrations of free formaldehyde
GOST 24892-1981 Organic cationic dyes. Determinations of concentrations of shade
GOST 29081-1991 Natural rubber latex concentrate, centrifuged or creamed ammonia-preserved types. Specifications
GOST 3594.5-1977 Moulding clay. Method for the determination of hydrogen ion concentration of water extract
GOST 22567.5-1993 Synthetic detergents and surfactants. Methods for determination of hydrogen ions concentration
GOST 29234.6-1991 Moulding sands. Methods for determination of water extract hydrodgen ions concentration (pH)
GOST 22567.5-1977 Synthetic detergents. Method for determination of ph
GOST 27403-1987 Vat dyes. Determination of freezing point, centrifuging fastness and value of hydrogen ion concentration (pH)
GOST 25645.146-1989 Earth's ionosphere. Model of global distribution of concentration, temperature and effective collision frequency of electrons
GOST 23409.22-1978 Moulding sands and sand mixtures. Method for determination of water extract hydrogen ions concentration
GOST R 25645.158-1994 Earth's uppermost ionosphere. Model of distribution of the concentration of electrons in the flat of geomagnetic equator
GOST 19728.18-2001 Talc and talcomagnesite. Method for determination of hydrogen ions concentration (pH) of water suspension and water extract
GOST 19728.18-1988 Talc and talcomagnesite. Method for determination of hydrogen ions concentration of water suspension and water extract
GOST R ISO 25140-2017 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection
GOST R 51655-2000 Alcohol products and raw material for it's production. Method for determination of free and total sulphurous acid mass concentration
GOST R 8.845-2013 State system for ensuring the uniformity of measurements. Air ion composition measurements. Method of measuring volume density of electric charge of air and air ion concentration using aspiration capacitor
GOST R 55761-2013 Batches, sugar mash, brew from food raw material. Determination mass concentration of cations, anions of non-organic and organic acids content by capillary electrophoresis method
GOST R 25645.157-1994 Earth's lower ionosphere. Model of global distribution of concentration and effective collision frequency of electrons for VLE-LF radio foreacast
GOST R 51821-2001 Vodkas and special vodkas. Ion chromatography method of determination of potassium, sodium, ammonium, calcium, magnesium, strontium cations and fluorides, chlorides, nitrates, nitrites, phosphates and sulphates anions mass concentration
GOST 29232-1991 Anionic and non-ionic surface active agents. Determination of the critical micellization concentration. Method by measuring surface tension with a plate, stirrup or ring

Hubei Provincial Standard of the People's Republic of China, centrifuge concentration

DB42/T 1198-2016 Concentration levels of air negative oxygen ions in Hubei Province
DB42/T 1914-2022 Technical specifications for monitoring the concentration of negative oxygen ions in forest environment

Standard Association of Australia （SAA）, centrifuge concentration

AS 5009.2:2003 Determination of particle size distribution by centrifugal liquid sedimentation methods - Photocentrifuge method
AS ISO 14237:2006 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials

International Organization for Standardization (ISO), centrifuge concentration

ISO/DIS 2004 Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specifications
ISO 2004:1988 Natural rubber latex concentrate; centrifuged or creamed, ammonia-preserved types; specification
ISO 13318-2:2001 Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 2: Photocentrifuge method
ISO 13318-2:2007 Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 2: Photocentrifuge method
ISO 2004:2010 Natural rubber latex concentrate - Centrifuged or creamed, ammonia-preserved types - Specifications
ISO 2004:2017 Natural rubber latex concentrate - Centrifuged or creamed, ammonia-preserved types - Specifications
ISO 13318-3:2004 Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 3: Centrifugal X-ray method
ISO 19448:2018 Dentistry - Analysis of fluoride concentration in aqueous solutions by use of fluoride ion-selective electrode
ISO 8299:2019 Nuclear fuel technology — Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry
ISO 6840:1982 Cationic surface active agents (Hydrochlorides and hydrobromides); Determination of critical micellization concentration; Method by measurement of counter ion activity
ISO 11632:1998 Stationary source emissions - Determination of mass concentration of sulfur dioxide - Ion chromatography method
ISO 23777:2023 Pulps — Kraft liquor — Determination of hydrosulphide ion concentration using potentiometric titration
ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
ISO 14237:2000 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
ISO 4311:1979 Anionic and non-ionic surface active agents; Determination of the critical micellization concentration; Method by measuring surface tension with a plate, stirrup or ring
ISO/CD 13318-1 Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 1: General principles and guidelines
ISO/DIS 13318-1:2023 Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 1: General principles and guidelines
ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
ISO 13318-1:2001 Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 1: General principles and guidelines
ISO 15825:2015 Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disc centrifuge photosedimentometry
ISO 15825:2004 Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disc centrifuge photosedimentometry
ISO 15825:2017 Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disc centrifuge photosedimentometry
ISO 8299:2005 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry

农业农村部, centrifuge concentration

NY/T 924-2021 Technical Regulations for Processing of Concentrated Natural Rubber Ammonia Preserved Centrifugal Latex

British Standards Institution (BSI), centrifuge concentration

BS ISO 13318-3:2004 Determination of particle size distribution by centrifugal liquid sedimentation methods - Centrifugal X-ray method
BS ISO 2004:2010 Natural rubber latex concentrate. Centrifuged or creamed, ammonia-preserved types. Specifications
23/30469718 DC BS ISO 2004. Natural rubber latex concentrate. Centrifuged or creamed, ammonia-preserved types. Specifications
BS ISO 2004:2017 Tracked Changes. Natural rubber latex concentrate. Centrifuged or creamed, ammonia-preserved types. Specifications
BS ISO 23777:2023 Pulps. Kraft liquor. Determination of hydrosulphide ion concentrationusing potentiometric titration
BS EN ISO 19448:2018 Dentistry. Analysis of fluoride concentration in aqueous solutions by use of fluoride ion-selective electrode
BS EN 12619:2013 Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon. Continuous flame ionisation detector method
BS ISO 13318-1:2001 Determination of particle size distribution by centrifugal liquid sedimentation methods. General principles and guidelines
BS ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
BS EN ISO 25140:2010 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
BS ISO 15825:2015 Rubber compounding ingredients. Carbon black. Determination of aggregate size distribution by disc centrifuge photosedimentometry
BS ISO 15825:2004 Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disc centrifuge photosedimentory
BS ISO 15825:2017 Rubber compounding ingredients. Carbon black. Determination of aggregate size distribution by disc centrifuge photosedimentometry
BS EN ISO 8299:2021 Nuclear fuel technology. Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry
BS ISO 20927:2019 Rubber compounding ingredients. Precipitated silica. Determination of aggregate size distribution by disc centrifuge
BS EN ISO 787-23:1995 General methods of test for pigments and extenders. Determination of density (using a centrifuge to remove entrained air)

Professional Standard - Forestry, centrifuge concentration

LY/T 2586-2016 Specification on observation on air negative oxygen ion concentration
LY/T 2587-2016 Specification on station construction for monitoring air negative oxygen ion concentration

American Society for Testing and Materials (ASTM), centrifuge concentration

ASTM D1583-01(2008) Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D1583-01(2018) Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D1076-21 Standard Specification for Rubber—Concentrated, Ammonia Stabilized, Creamed, and Centrifuged Natural Latex
ASTM D1076-23 Standard Specification for Rubber—Concentrated, Ammonia Stabilized, Creamed, and Centrifuged Natural Latex
ASTM D1583-01 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D1583-00 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D1583-01(2013) Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D1076-15(2020) Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
ASTM D425-88(1994) Standard Test Method for Centrifuge Moisture Equivalent of Soils
ASTM D425-88(2001) Standard Test Method for Centrifuge Moisture Equivalent of Soils
ASTM D425-17 Standard Test Method for Centrifuge Moisture Equivalent of Soils
ASTM F862-11(2017) Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
ASTM D425-88(2008) Standard Test Method for Centrifuge Moisture Equivalent of Soils
ASTM D1076-02 Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
ASTM D1076-97 Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
ASTM D1076-06 Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
ASTM D1076-14 Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
ASTM D1076-15 Standard Specification for Rubber&x2014;Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
ASTM D1076-10 Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
ASTM F862-93(1998) Standard Test Method for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
ASTM F862-93(2002) Standard Test Method for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
ASTM F862-11(2022) Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
ASTM E1413-06 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM C1625-05 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
ASTM C1625-12 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
ASTM F862-11 Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
ASTM D778-97(2007) Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot-Extraction and Cold-Extraction Procedures)
ASTM C1625-19 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
ASTM E611-92 Test Methods for Low Concentrations of Diethylene Glycol in Ethylene Glycol by Gas Chromatography
ASTM D3561-11 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM D778-97(2002) Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot- Extraction and Cold-Extraction Procedures)
ASTM E1413-07 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM D778-97 Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot- Extraction and Cold-Extraction Procedures)
ASTM C678-75(1991)e1 Test Method for Determination of Particle Size Distribution of Alumina or Quartz Using Centrifugal Sedimentation
ASTM D5546-94a Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
ASTM D5546-01 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
ASTM C1182-91(2001) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photo sedimentation
ASTM D5546-09 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
ASTM D6836-02 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge
ASTM C1672-07 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
ASTM E1413-00 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM E1413-00(2005) Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM E1413-19 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration onto an Adsorbent Tube
ASTM E3189-19 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Static Headspace Concentration onto an Adsorbent Tube
ASTM C1672-17 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
ASTM C1672-07(2014) Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer

Professional Standard - Coal, centrifuge concentration

MT/T 807-1999 Separation of vitrinite group in bituminous coal

AENOR, centrifuge concentration

UNE-ISO 2004:2017 Natural rubber latex concentrate. Centrifuged or creamed, ammonia-preserved types. Specifications
UNE 77226:1999 STATIONARY SOURCE EMISSIONS. DETERMINATION OF MASS CONCENTRATION OF SULFUR DIOXIDE. ION CHROMATOGRAPHY METHOD.
UNE-EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
UNE-EN ISO 25140:2011 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
UNE 55725:1987 SURFACE ACTIVE AGENTS. DETERMINATION OF LOW CONCENTRATIONS OF NON-IONIC SUFACTANTS IN AQUEOUS MEDIA USING DRAGENDORFF REAGENT
UNE 55700:1982 SURFACE ACTIVE AGENTS. ANIONIC AND NON-IONIC SURFACE ACTIVE AGENTS. DETERMINATION OF THE CRITICAL MICELLIZATION CONCENTRATION. METHOD BY MEASURING SURFACE TENSION WITH A PLATE, STIRRUP OR RING
UNE 55802:1985 SURFACE ACTIVE AGENTS. CATIONIC SURFACE ACTIVE AGENTS (HYDROCHLORIDES AND HYDROBROMIDES). DETERMINATION OF CRITICAL MICELLIZATION CONCENTRATION. METHOD BY MEASUREMENT OF COUNTER ION ACTIVITY

National Metrological Verification Regulations of the People's Republic of China, centrifuge concentration

JJG 972-2023 Constant Acceleration Centrifugal Test Machines
JJG 972-2002 Verification Regulation of Constant Acceleration Centrifugal Test Machines
JJG 12-1987 Verification Regulation of Graduated Cantrifuge Tubes、Graduated Test Tubes Blood Sugar Tubes and Blood Digestion Tubes

Japanese Industrial Standards Committee (JISC), centrifuge concentration

JIS Z 8823-2:2004 Determination of particle size distribution by centrifugal liquid sedimentation methods -- Part 2: Photocentrifuge method
JIS Z 8823-2:2016 Determination of particle size distribution by centrifugal liquid sedimentation methods -- Part 2: Photocentrifuge method
JIS A 5337:1995 Pretensioned spun high strength concrete piles
JIS K 5101-11-2:2004 Test methods for pigments -- Part 11: Density -- Section 2: Centrifugal degassing method
JIS K 0143:2023 Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of boron atomic concentration in silicon using uniformly doped materials
JIS K 0143:2000 Surface chemical analysis -- Secondary ion mass spectrometry -- Determination of boron atomic concentration in silicon using uniformly doped materials
JIS Z 8823-1:2001 Determination of particle size distribution by centrifugal liquid sedimentation methods -- Part 1: General principles and guidelines

United States Navy, centrifuge concentration

NAVY MIL-P-18472 G-1989 PUMPS, CENTRIFUGAL, CONDENSATE, FEED BOOSTER, WASTE HEAT BOILER, AND DISTILLING PLANT

Association Francaise de Normalisation, centrifuge concentration

NF T42-100:1989 Naturel rubber latex concentrate. Centrifuged or creamed, ammonia-preserved types. Specifications.
NF T42-100*NF ISO 2004:2018 Natural rubber latex concentrate - Centrifuged or creamed, ammonia-preserved types - Specifications
NF ISO 2004:2018 Latex concentré de caoutchouc naturel - Types centrifugés ou crémés, préservés à l'ammoniaque - Spécifications
NF T42-100:2010 Natural rubber latex concentrate - Centrifuged or creamed, ammonia-preserved types - Specifications.
NF ISO 11632:1998 Émission de sources fixes - Détermination de la concentration en masse de dioxyde de soufre - Méthode par chromatographie ionique.
NF T90-431:2017 Water quality - Detection and enumeration of Legionella spp and Legionella pneumophilia - Method by direct inoculation and after concentration by membrane filtration of centrifugation
NF EN ISO 25140:2010 Émissions de sources fixes - Méthode automatique pour la détermination de la concentration en méthane par détection à ionisation de flamme (FID)
NF EN ISO 19448:2018 Médecine bucco-dentaire - Analyse de la concentration en fluorure dans les solutions aqueuses en utilisant une électrode sélective d'ions fluorures
NF S91-275*NF EN ISO 19448:2018 Dentistry - Analysis of fluoride concentration in aqueous solutions by use of fluoride-ion selective electrode
NF T90-431:2014 Water quality - Detection and enumeration of Legionella spp and Legionella pneumophilia - Method by direct inoculation and after concentration by membrane filtration of centrifugation
NF T90-431:2003 Water quality - Detection and enumeration of Legionella spp and Legionella pneumophilia - Method by direct inoculation and after concentration by membrane filtration of centrifugation.
NF T90-431/A1:2006 Water quality - Detection and enumeration of Legionella spp and Legionella pneumophilia - Method by direct inoculation and after concentration by membrane filtration or centrifugation.
NF EN 15763:2010 Produits alimentaires - Dosage des éléments traces - Dosage de l'arsenic, du cadmium, du mercure et du plomb par spectrométrie d'émission avec plasma induit par haute fréquence et spectromètre de masse (ICP-MS) après digestion sous pression
NF EN 12619:2013 Émissions de sources fixes - Détermination de la concentration massique en carbone organique total - Méthode du détecteur continu à ionisation de flamme
NF T73-411:1980 Anionic and non-ionic surface active agents. Determination of the critical micellization concentration. Method by measuring surface tension with a plate, stirrup or ring.
NF EN 3841-508:2005 Série aérospatiale - Disjoncteurs - Méthodes d'essais - Partie 508 : accélération centrifuge
NF X21-070*NF ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials.
NF X43-328*NF EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
NF X10-603:1987 CENTRIFUGAL,MIXED FLOW AND AXIAL PUMPS. CODE FOR HYDRAULIC PERFORMANCE TESTS. PRECISION CLASS.
NF EN ISO 5198:1999 Pompes centrifuges, hélico-centrifuges et hélices - Code d'essais de fonctionnement hydraulique - Classe de précision.
NF X43-353*NF EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID).
NF T73-414:1983 Surface active agents. Cationic surface active agents (hydrochlorides and hydrobromides). Determination of critical micellization concentration. Method by measurement of counter ion activity.
NF X11-685-1*NF ISO 13318-1:2001 Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 1 : general principles and guidelines
NF EN ISO 8299:2021 Technologie du combustible nucléaire - Détermination de la teneur isotopique et de la concentration d'uranium et du plutonium dans les matières nucléaires en solution d'acide nitrique par spectrométrie de masse à thermo-ionisation
NF M60-403*NF EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry
NF ISO 13318-1:2001 Détermination de la distribution granulométrique par les méthodes de sédimentation centrifuge dans un liquide - Partie 1 : principes généraux et lignes directrices

Korean Agency for Technology and Standards (KATS), centrifuge concentration

KS M ISO 2004:2021 Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specifications
KS M ISO 2004:2010 Natural rubber latex concentrate-Centrifuged or creamed,ammonia-preserved types-Specification
KS M ISO 2004:2015 Natural rubber latex concentrate－Centrifuged or creamed,ammonia-preserved types－Specification
KS A ISO 13318-2-2014(2019) Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 2: Photocentrifuge method
KS E ISO 12739:2007 Zinc sulfide concentrates－Determination of zinc content－Ion-exchange and EDTA titrimetric method
KS M ISO 6840:2003 Cationic surface active agents(hydrochlorides and hydrobromides)-Determination of critical micellization concentration-Method by measurement of counter ion activity
KS M ISO 6840:2013 Cationic surface active agents(hydrochlorides and hydrobromides)－Determination of critical micellization concentration－Method by measurement of counter ion activity
KS M ISO 6840-2003(2008) Cationic surface active agents(hydrochlorides and hydrobromides)－Determination of critical micellization concentration－Method by measurement of counter ion activity
KS I ISO 11632:2004 Stationary source emissions-Determination of the massconcentration of sulfur dioxide(Ion chromatography method)
KS P ISO 19448:2021 Dentistry — Analysis of fluoride concentration in aqueous solutions by use of fluoride ion-selective electrode
KS I ISO 11632:2014 Stationary source emissions — Determination of the mass concentration of sulfur dioxide(ion chromatography method)
KS I ISO 11632-2014(2019) Stationary source emissions — Determination of the mass concentration of sulfur dioxide(ion chromatography method)
KS M ISO 15825-2017(2022) Rubber compounding ingredients－Carbon black－Determination of aggregate size distribution by disc centrifuge photosedimentometry
KS F 2454-2011 Standard test method for compressive strength of spun concrete
KS B ISO 5198:2003 Centrifugal, mixed flow and axial pumps-Code for hydraulic performance tests-Precision class
KS B ISO 5198-2003(2018) Centrifugal, mixed flow and axial pumps－Code for hydraulic performance tests－Precision class
KS I ISO 25140-2012(2017) Stationary source emissions－Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS I ISO 25140:2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS M ISO 4311-2003(2018) Anionic and non-ionic surface active agents－Determination of the critical micellization concentration－Method by measuring surface tension with a plate, stirrup or ring
KS M ISO 4311:2003 Anionic and non-ionic surface active agents－Determination of the critical micellization concentration－Method by measuring surface tension with a plate, stirrup or ring
KS I ISO 25140:2012 Stationary source emissions－Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS M ISO 2272:2007 Surface active agents－Soaps－Determination of low contents of free glycerol by molecular absorption spectrometry
KS D ISO 14237-2003(2018)
KS M ISO 15825:2007 Rubber compounding ingredients－Carbon black－Determination of aggregate size distribution by disc centrifuge photosedimentometry
KS A ISO 13318-1-2014(2019) Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 1: General principles and guidelines
KS M ISO 15825:2017 Rubber compounding ingredients－Carbon black－Determination of aggregate size distribution by disc centrifuge photosedimentometry
KS D ISO 14237:2003 Surface chemical analysis－Secondary-ion mass spectrometry－Determination of boron atomic concentration in silicon using uniformly doped materials

KR-KS, centrifuge concentration

KS M ISO 2004-2021 Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specifications
KS P ISO 19448-2021 Dentistry — Analysis of fluoride concentration in aqueous solutions by use of fluoride ion-selective electrode
KS I ISO 25140-2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS M ISO 4311-2003(2023) Anionic and non-ionic surface active agents－Determination of the critical micellization concentration－Method by measuring surface tension with a plate, stirrup or ring
KS M ISO 15825-2017 Rubber compounding ingredients－Carbon black－Determination of aggregate size distribution by disc centrifuge photosedimentometry
KS D ISO 14237-2003(2023)

ES-UNE, centrifuge concentration

UNE-ISO 2004:2018 Natural rubber latex concentrate. Centrifuged or creamed, ammonia-preserved types. Specifications
UNE-EN ISO 19448:2019 Dentistry - Analysis of Fluoride Concentration in Aqueous Solutions by use of Fluoride-Ion Selective Electrode (ISO 19448:2018)
UNE-EN 3841-508:2004 Aerospace series - Circuit breakers - Test methods - Part 508: Centrifugal acceleration (Endorsed by AENOR in April of 2005.)
UNE-EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019) (Endorsed by Asociación Española de Norma...

U.S. Military Regulations and Norms, centrifuge concentration

ARMY A-A-52026 VALID NOTICE 1-2004 PUMPS, CENTRIFUGAL; SUMP, PNEUMATIC-MOTOR-DRIVEN, 210 GPM AT 25 FOOT TOTAL HEAD
ARMY A-A-52026-1991 PUMPS, CENTRIFUGAL; SUMP, PNEUMATIC-MOTOR-DRIVEN, 210 GPM AT 25 FOOT TOTAL HEAD
ARMY A-A-52038 VALID NOTICE 1-2004 PUMP ASSEMBLY, CENTRIFUGAL, WATER, DIESEL-ENGINE-DRIVEN, 3-INCH, SKID-MOUNTED, 200 GPM AT 300 FEET
ARMY A-A-52038-1991 PUMP ASSEMBLY, CENTRIFUGAL, WATER, DIESEL-ENGINE-DRIVEN, 3-INCH, SKID-MOUNTED, 200 GPM AT 300 FEET

未注明发布机构, centrifuge concentration

BS ISO 13318-3:2004(2007) Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 3 : Centrifugal X - ray method
BS ISO 11632:1998(1999) Stationary source emissions — Determination of mass concentration of sulfur dioxide — Ion chromatography method
BS EN ISO 5198:1999(2000) Centrifugal, mixed flow and axial pumps — Code for hydraulic performance tests — Precision class
BS ISO 13318-1:2001(2002) Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 1 : General principles and guidelines

Professional Standard - Machinery, centrifuge concentration

JB/T 8051-2008 Standard of strength calculation for centrifugal drum
JB/T 8051-1996 Centrifuge drum strength calculation specification

CH-SNV, centrifuge concentration

VSM 23745.2-1967

GOSTR, centrifuge concentration

GOST R 59016-2020 Mineral natural drinking waters. Determination of the mass concentration of bromide ions by the photometric method

Association of German Mechanical Engineers, centrifuge concentration

VDI 2452 Blatt 1-1978 Air pollution measurement; measurement of total fluoride ion concentration; impinger method
VDI 2452 Blatt 2-1975 Gaseous air pollution measurement; determination of fluoric ion concentration; preseparation and electrometric detection
VDI 3481 Blatt 4-2007 Gaseous emission measurement - Measurement of the concentrations of total organic carbon and methane carbon using the flame ionisation detector (FID)
VDI 2459 Blatt 1-2000 Gaseous emission measurement - Determination of carbon monoxide concentration using flame ionisation detection after reduction to methane
VDI 2452 Blatt 3-1987 Gaseous air pollution measurement; measurement of fluoride ion concentration; sorption method with prepared silver balls and heated membrane filter

Professional Standard - Electron, centrifuge concentration

SJ/T 11493-2015 Test method for measuring nitrogen concentration in silicon substrates by secondary ion mass spectrometry
SJ/T 11498-2015 Test method for measuring oxygen contamination in heavily doped silicon substrates by secondary ion mass spectrometry

European Committee for Standardization (CEN), centrifuge concentration

EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method [Superseded: CEN EN 13526]
EN ISO 19448:2018 Dentistry - Analysis of Fluoride Concentration in Aqueous Solutions by use of Fluoride-Ion Selective Electrode
EN 12619:1999 Stationary Source Emissions - Determination of the Mass Concentration of Total Gaseous Organic Carbon at Low Concentrations in Flue Gases - Continuous Flame Ionization Detector Method
EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
EN 1279-3:2002 Glass in building Insulating glass units Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances
EN 1279-3:2018 Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances

Professional Standard - Electricity, centrifuge concentration

DL/T 1479-2015 Analytical method for ethanolamine in steam and water in power plant ion chromatography

Lithuanian Standards Office , centrifuge concentration

LST EN 12619-2000 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous flame ionisation detector method
LST EN 3841-508-2005 Aerospace series - Circuit breakers - Test methods - Part 508: Centrifugal acceleration
LST EN 12619-2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
LST EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
LST EN ISO 5198:2000 Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class (ISO 5198:1987)

National Metrological Technical Specifications of the People's Republic of China, centrifuge concentration

JJF 1116-2004 Calibration Specification for Linear Accelerometer Used Precision Centrifuger
JJF 1426-2013 Calibration Specification for Dynamic Parameters of Linear Accelerometer Used Double Centrifuge

VN-TCVN, centrifuge concentration

TCVN 6750-2000 Stationary source emissions.Determination of mass concentration of sulfur dioxide.Ion chromatography method

IT-UNI, centrifuge concentration

UNI 7118-1972
UNI EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry

Danish Standards Foundation, centrifuge concentration

DS/ISO 11632:1998 Stationary source emissions - Determination of mass concentration of sulfur dioxide - Ion chromatography method
DS/EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
DS/EN 3841-508:2005 Aerospace series - Circuit breakers - Test methods - Part 508: Centrifugal acceleration
DS/EN ISO 5198:1999 Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class
DS/EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method

BE-NBN, centrifuge concentration

NBN T 63-129-1980 Anionic and non-ionic surface active agents - Dermination of the critical micellization concentration - Method by measuring surface tension with a plate, stirrup or ring
NBN T 63-123-1980 Surface active agents - Analysis of soaps - Determination of low contents of free glycerol - Spectrophotometric method
NBN T 63-152-1983 Cationic surface active agents (hydrochlorides and hydrobromides) - Determination of critical micellization concentration - Method by measurement of counter ion activity

Professional Standard - Chemical Industry, centrifuge concentration

HG/T 3835-2006 Determination of density of pigments (using a centrifuge to remove entraind air)

AGMA - American Gear Manufacturers Association, centrifuge concentration

915-3-A99-1999 Inspection Practices - Gear Blanks@ Shaft Center Distance and Parallelism

Taiwan Provincial Standard of the People's Republic of China, centrifuge concentration

CNS 10979-1984 Method of Test for Compressive Strength of Spun Concrete
CNS 12704-1990 Method of Test for Particle Size Distribution of Alumina or Quartz Using Centrifugal Sedimentation

Military Standard of the People's Republic of China-General Armament Department, centrifuge concentration

GJB 772.103-1989 Test methods for explosives Particle size determination Disk centrifugal sedimentation method

Institute of Electrical and Electronics Engineers (IEEE), centrifuge concentration

IEEE 836-2001 Recommended practice for precision centrifuge testing of linear accelerometers
IEEE Std 836-1991 IEEE Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers
IEEE Std 836-2001 IEEE Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers
IEEE 836-2009 Recommended practice for precision centrifuge testing of linear accelerometers
IEEE Std 836-2009 IEEE Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers - Redline
IEEE Unapproved Draft Std P836/D17, Dec 2008 IEEE Draft Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., centrifuge concentration

IEEE 836-1991 Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers

YU-JUS, centrifuge concentration

JUS U.N1.052-1982 Concrete pipes for sevverage length over 1 m. Centrifugal tubes. Technical reguirements
JUS H.C8.223-1989 Pigments and extenders. Determination of density (using a centrifuge to remove entrained air)

Society of Automotive Engineers (SAE), centrifuge concentration

SAE AMS4862F-2001 Manganese Bronze, Sand and Centrifugal Castings 63Cu 24Zn 6.2Al3.8Mn 3.0Fe High Strength, As Cast
SAE AMS4862E-2000 MANGANESE BRONZE, SAND AND CENTRIFUGAL CASTINGS 63Cu - 24Zn - 6.2Al - 3.8Mn - 3.0Fe High Strength, As Cast
SAE AMS4862F-2016 Manganese Bronze, Sand and Centrifugal Castings 63Cu - 24Zn - 6.2Al - 3.8Mn - 3.0Fe High Strength, As Cast
SAE AMS4862D-1992 MANGANESE BRONZE CASTINGS, SAND AND CENTRIFUGAL 63Cu - 24Zn - 6.2Al - 3.8Mn - 3.0Fe (CDA 86300) High Strength, As Cast

US-HI, centrifuge concentration

HI 9.6.7-2010 Effects of Liquid Viscosity on Rotodynamic (Centrifugal and Vertical) Pump Performance

American National Standards Institute （ANSI), centrifuge concentration

ANSI/IEEE 836:2009 Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers

CU-NC, centrifuge concentration

NC 20-06-24-1987 Medical Sciences. Electrolytic and Basic Acid Equilibrium Study. Determination of Ion Potassium Concentration. Chemical Analysis Method

国家市场监督管理总局、中国国家标准化管理委员会, centrifuge concentration

GB/T 38165-2019 Detection of circulating cell-free DNA concentration in human peripheral blood—Real-time PCR method based on Alu sequence
GB/T 5170.16-2018 Inspection methods for environmental testing equipments—Part 16：Centrifugal machines for constant acceleration test

European Association of Aerospace Industries, centrifuge concentration

AECMA PREN 3841-508-2003 Aerospace Series Circuit Breakers Test Methods Part 508: Centrifugal Acceleration Edition P 3
AECMA PREN 3841-508-1998 Aerospace Series Circuit Breakers Test Methods Part 508 : Centrifugal Acceleration Edition P 2
AECMA PREN 3841-508-1996 Aerospace Series Circuit Breakers Test Methods Part 508 : Centrifugal Acceleration Edition P 1

SAE - SAE International, centrifuge concentration

SAE AMS4862E-1993 Manganese Bronze@ Sand and Centrifugal Castings 63Cu - 24Zn - 6.2Al - 3.8Mn - 3.0Fe High Strength@ as Cast (UNS C86300)
SAE AMS4862C-1980 MANGANESE BRONZE CASTINGS@ SAND AND CENTRIFUGAL High Strength 63Cu - 24Zn - 6.2A1 - 3.8Mn - 3.0Fe (CDA 863) (UNS C86300)
SAE AMS4862D-1987 MANGANESE BRONZE CASTINGS@ SAND AND CENTRIFUGAL 63Cu - 24Zn - 6.2A1 - 3.8Mn - 3.0Fe (CDA 86300) High Strength@ As Cast (UNS C86300)

TH-TISI, centrifuge concentration

TIS 1765-1999 Anionic and non.ionic surface active agents.determination of the critical micellization concentration.method by measuring surface tension with a plate, stirrup or ring

Shaanxi Provincial Standard of the People's Republic of China, centrifuge concentration

DB61/T 1294-2019 Determination of low-concentration sulfur dioxide in exhaust gas from stationary pollution sources Molecular sieve adsorption tube sampling-ion chromatography

Aerospace, Security and Defence Industries Association of Europe (ASD), centrifuge concentration

ASD-STAN PREN 3841-508-2003 Aerospace Series Circuit Breakers Test Methods Part 508: Centrifugal Acceleration (Edition P 3)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, centrifuge concentration

PREN 3841-508-2003 Aerospace Series Circuit Breakers Test Methods Part 508: Centrifugal Acceleration (Edition P 3)
PREN 3841-508-1998 Aerospace Series Circuit Breakers Test Methods Part 508 : Centrifugal Acceleration (Edition P 2)
PREN 3841-508-1996 Aerospace Series Circuit Breakers Test Methods Part 508 : Centrifugal Acceleration (Edition P 1)

API - American Petroleum Institute, centrifuge concentration

API 26-60105-1970 THE EFFECTS OF CHRONIC EXPOSURE TO LOW LEVELS OF CARBON MONOXIDE ON THE CARDIOVASCULAR SYSTEM OF DOGS - 1. EXPOSURE TO 100 PPM CARBON MONOXIDE

BELST, centrifuge concentration

STB 17.13.05-42-2015 Еnvironmental pгоtесtion. Analitical (laboratory) control and monitoring of the environment. Water quality. Determination of sulfat-ions concentration by turbidimetric metod