ZH
RU
ES

How to use a spectrophotometer

How to use a spectrophotometer, Total:354 items.

In the international standard classification, How to use a spectrophotometer involves: Optics and optical measurements, Coals, Non-metalliferous minerals, Analytical chemistry, Non-ferrous metals, Surface treatment and coating, Petroleum products in general, Air quality, Products of the chemical industry, Paper and board, Graphic technology, Lubricants, industrial oils and related products, Fertilizers, Water quality, Paint ingredients, Raw materials for rubber and plastics, Lighting, Organic chemicals, Fruits. Vegetables, Fuels, Fibre optic communications, Medical equipment, Ceramics, Solar energy engineering, Inorganic chemicals, Particle size analysis. Sieving, Measurement of volume, mass, density, viscosity, Pulps, Paints and varnishes, Fluid power systems, Wastes, Road engineering, Rubber, Plastics, Paper products, Protection against fire, Non-destructive testing, Radiation measurements, Glass, Nuclear energy engineering, Linear and angular measurements, Refractories, Construction industry, Testing of metals, Protection of and in buildings, CONSTRUCTION MATERIALS AND BUILDING, Protective equipment, Metalliferous minerals, Textile fibres.

American Society for Testing and Materials (ASTM), How to use a spectrophotometer

ASTM E1348-90(1996) Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E1348-15e1 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E2175-01(2021) Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
ASTM E2056-04 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E2175-01 Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
ASTM E2175-01(2008) Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
ASTM E2175-01(2013) Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
ASTM E1348-11 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E1348-15 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E2056-00 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E1331-96(2003) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E2056-04(2010) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E2056-04(2016) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E1348-02(2007) Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E1348-02 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E1164-94 Standard Practice for Obtaining Spectrophotometric Data for Object-Color Evaluation
ASTM E1164-09 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM E1866-97(2013) Standard Guide for Establishing Spectrophotometer Performance Tests
ASTM E1164-12e1 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM E958-93(2005) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM UOP549-81 Sodium in Petroleum Distillates by Flame Emission, Using an Atomic Absorption Spectrophotometer
ASTM E1348-22 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E2867-14(2019) Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
ASTM E1348-90 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E1331-96 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM E1349-06(2013) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45deg;:0deg; or 0deg;:45deg;) Geometry
ASTM G130-12 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM UOP464-00 Phenol in Light Aromatic Hydrocarbons and Cyclohexane by Spectrophotometry
ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM D1685-00 Standard Test Method for Traces of Thiophene in Benzene by Spectrophotometry
ASTM D1685-05 Standard Test Method for Traces of Thiophene in Benzene by Spectrophotometry
ASTM E1331-04 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E1349-90(1998) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry
ASTM E1331-09 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E1349-06(2022) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry
ASTM E2313-20 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
ASTM E1331-15 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E1164-12 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM E1349-06 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45:0 or 0:45) Geometry
ASTM E387-84(1995)e1 Standard Test Method for Estimating Stray Radiant Power Ratio of Spectrophotometers by the Opaque Filter Method
ASTM E387-04 Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM E387-04(2009) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM D6756-10(2015) Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM C1549-16(2022) Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM C1549-16 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM C1549-09(2014) Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM E387-04(2022) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM E387-04(2014) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM E2313-21a Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
ASTM E2313-21 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
ASTM E2193-23 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
ASTM E2143-01(2006)e1 Standard Practice for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
ASTM E2143-01 Standard Practice for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
ASTM E1651-94(2004) Standard Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry (Withdrawn 2004)
ASTM E2143-01(2006) Standard Practice for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
ASTM E2108-10 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
ASTM E1349-06(2018) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry
ASTM E1710-18 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
ASTM E2313-22 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
ASTM E1458-12(2022) Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM D5902-05(2015) Standard Test Method for Rubber&x2014;Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
ASTM D6756-10 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D7399-08 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
ASTM G138-03 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
ASTM G138-06 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
ASTM C715-90(2006) Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
ASTM C715-90(2011)e1 Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
ASTM D3124-98(2011) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM C1865-18 Standard Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer
ASTM D7058-19 Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
ASTM D7058-04(2014) Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
ASTM D5670-95(2014) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
ASTM E2302-03a Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer
ASTM E2302-03 Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Reflectometer
ASTM D6756-09 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D6756-17 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D7941/D7941M-23 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
ASTM D6756-02 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D5670-95(2000)e1 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
ASTM D8496-23 Standard Test Method for Determination of Hydroquinone (HQ) Content in Vinyl Acetate Monomer (VAM) Using Ultraviolet-Visible (UV-Vis) Spectrophotometer
ASTM D7941/D7941M-14 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
ASTM D7416-09 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscome
ASTM F1443-93(2003) Standard Practice for Using 0.008-in. (0.203-mm) Aperture Reflectometers as Test Instruments for Measuring Visual Image Quality of Business Copy Images
ASTM D7212-13(2018) Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
ASTM E2301-12 Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45x00B0;:Normal Geometry
ASTM E1477-98A(2017)e1 Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
ASTM E1477-98a(2017) Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers

Indonesia Standards, How to use a spectrophotometer

SNI 13-4119-1996 Determination of phosphorus in ash from coal using spectrophotometer
SNI 13-6590-2001 The determination for arsenic content in minerals by spectrophotometric
SNI 19-7119.2-2005 Ambient atmospheres - Part 2: Test methods of nitrogen dioxide (NO2) content by Griess Saltzman using spectrophotometers
SNI 19-7117.19-2009
SNI 19-7119.7-2005 Ambient atmospheres - Part 7: Test methods of sulphur dioxide (SO2) content by pararosaniline using spectrophotometers
SNI 7117.18-2009
SNI 19-7117.5-2005 Exhaust gas emissions - Stationary sources - Part 5: Test methods of nitrogen oxides by phenol dissulphonic acid (PDS) using spectrophotometers
SNI 03-4151-1996 Test methods for phosphate content in light sediment by hydrogen chloride using spectrophotometer apparatus in ammonium molybdat manuver
SNI 19-7117.8-2005 Exhaust gas emissions - Stationary sources - Part 8: Test methods of hydrogen chloride (HCl) content by mercury thiocyanate using spectrophotometers
SNI 06-6989.51-2005 Water and waste water - Part 51: Test methods of anionic surfactant content with spectrophotometers by methylene blue
SNI 19-7119.5-2005 Ambient atmospheres - Part 5: Test methods of index sulphates content by PbO2 candle media and turbidimetry using spectrophotometers
SNI 13-6345-2000 Determination of trace elements in coal and coke ash by atomic absorpsion spectrophotometer
SNI 06-6989.30-2005 Water and wastewater - Part 30: Test methods of ammonia content with spectrophotometers by phenates
SNI 06-6989.35-2005 Water and waste water - Part 35: Test methods of dissolved aluminium (Al) content by spectrophotometers with eriochrome cyanine R
SNI 6989.66-2009
SNI 6989.65-2009
SNI 6989.67-2009
SNI 06-6989.31-2005 Water and waste water - Part 31: Test methods of phosphate content by spectrophotometers with acid ascorbic
SNI 19-6670-2002 Determination of heavy metal content in solid waste by lithium metaborate fusion in an atomic absorption spectrophotometers (AAS)
SNI 19-7117.6-2005 Exhaust gas emissions - Stationary sources - Part 6: Test methods of ammonia (NH3) content by indophenol methods using spectrophotometers
SNI 19-7117.3.1-2005 Exhaust gas emissions - Stationary sources - Part 3: Sulphur oxides (SOx) - Section 1: Turbidimetry test methods using spectrophotometers

ECIA - Electronic Components Industry Association, How to use a spectrophotometer

TEP105-16-1990 Phosphor Linearity Tests Using Illuminance and Microphotometer Detectors

Association Francaise de Normalisation, How to use a spectrophotometer

NF T20-001:1966 Flame emission spectrophotometry. Introduction to its use.
NF A06-835:1973 Zinc for galvanizing purposes. Spectrophotometric determination of aluminium.
NF A06-612:1976 Chemical analysis of magnesium. Spectrophotometric determination of copper.
NF Q03-101-2*NF EN ISO 8254-2:2016 Paper and board - Measurement of specular gloss - Part 2 : 75 degree gloss with a parallel beam, DIN method
NF EN ISO 8254-1:2009 Papiers et cartons - Mesurage du brillant spéculaire - Partie 1 : brillant à 75o avec un faisceau convergent, méthode TAPPI
NF T20-211:1973 Aluminium oxide primarily used for the production of aluminium. Determination of calcium. Spectrophotometric method using naphtalhydroxamic acid.
FD CEN/TR 16013-3:2012 Exposition au poste de travail - Guide d'utilisation des instruments à lecture directe pour la surveillance des aérosols - Partie 3 : évaluation des concentrations de particules en suspension dans l'air à l'aide de photomètres
NF A06-841-5*NF EN 12441-5:2003 Zinc and zinc alloys - Chemical analysis - Part 5 : determination of iron by spectrophotometry in primary zinc
FD X43-711-3*FD CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3 : evaluation of airborne particle concentrations using photometers
NF EN 61755-2-4:2015 Dispositifs d'interconnexion et composants passifs fibroniques - Interfaces optiques de connecteurs - Partie 2-4 : paramètres de connexion de fibres unimodales à dispersion non décalée en contact physique - Sans angle pour applications en tant que...
NF T20-474:1973 Phosphoric acid for industrial use. Determination of silica content. Spectrophotometric method using the reduced silicomolybdic complex.
XP U42-761-1*XP CEN/TS 17784-1:2022 Organo-mineral fertilizers - Identification of complexing agents - Part 1 : method using UV-Vis spectrophotometry and gravimetry
NF EN ISO 25178-600:2019 Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 600 : caractéristiques métrologiques pour les méthodes de mesure par topographie surfacique
NF F31-584-3*NF EN 16584-3:2017 Railway applications - Design for PRM use - General requirements - Part 3 : optical and friction characteristics
FD X43-711-2*FD CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2 : evaluating airborne particle concentrations using Optical Particle Counters
NF EN ISO 9342-2:2006 Optique et instruments d'optique - Verres étalons pour l'étalonnage des frontofocomètres - Partie 2 : verres étalons pour frontofocomètres utilisés pour le mesurage des lentilles de contact
NF EN 16584-3:2017 Applications ferroviaires - Conception destinée à l'usage par les PMR - Exigences générales - Partie 3 : caractéristiques optiques et de friction
NF Q34-030-7*NF EN ISO 12625-7:2021 Tissue paper and tissue products - Part 7 : determination of optical properties - Measurement of brightness and colour with D65/10o (outdoor daylight)
NF P78-470:2015 Glass in building - Calculation of the temperatures of components and the forces in seals for insulating glass units without solar protection
NF C57-788-1-4/A1*NF EN 62788-1-4/A1:2020 Measurement procedures for materials used in photovoltaic modules - Part 1-4 : encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
NF EN 15042-2:2006 Mesure de l'épaisseur des revêtements et caractérisation des surfaces à l'aide d'ondes de surface - Partie 2 : guide pour le mesurage photométrique de l'épaisseur des revêtements
FD CEN/TR 16013-2:2010 Exposition au poste de travail - Guide d'utilisation des instruments à lecture directe pour la surveillance des aérosols - Partie 2 : évaluation des concentrations de particules en suspension dans l'air à l'aide de compteurs optiques de particules
NF EN ISO 6647-2:2020 Riz - Détermination de la teneur en amylose - Partie 2 : méthode spectrophotométrique de routine sans mode opératoire de dégraissage et avec étalonnage à l'aide d'étalons de riz
NF C93-845-4*NF EN 62150-4:2015 Fibre optic active components and devices - Test and measurement procedures - Part 4 : Relative intensity noise using a time-domain optical detection system
NF EN 62150-4:2015 Composants et dispositifs actifs à fibres optiques - Procédures d'essais et de mesures - Partie 4 : Intensité relative du bruit en utilisant un système de détection optique dans le domaine temporel
NF EN 62788-1-4:2017 Procédures de mesure des matériaux utilisés dans les modules photovoltaïques - Partie 1-4 : Encapsulants - Mesurage du facteur de transmission optique et calcul du facteur de transmission photonique à pondération solaire, de l'indice de jaunisse...
NF EN 13032-2:2017 Lumière et éclairage - Mesure et présentation des données photométriques des lampes et luminaires - Partie 2 : Présentation des données utilisées dans les lieux de travail intérieurs et extérieurs
NF C93-903-47*NF EN 61300-3-47:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-47 : examinations and measurements - End face geometry of PC/APC spherically polished ferrules using interferometry
NF EN ISO 7759:2010 Anodisation de l'aluminium et de ses alliages - Mesurage des caractéristiques de réflectivité des surfaces d'aluminium à l'aide d'un goniophotomètre normal ou simplifié
NF G06-030:1973 Textiles. Tests of fibres. Method of determining the quantity of cysteic acid contained in hydrolysates of wool by electrophoresis on paper and spectrophotometry.

National Metrological Technical Specifications of the People's Republic of China, How to use a spectrophotometer

JJF(建材) 153-2018 Specification for calibration of spectrophotometers for architectural glass
JJF(建材)153-2018 Specification for calibration of spectrophotometers for architectural glass

RU-GOST R, How to use a spectrophotometer

GOST 33092-2014 Petroleum products. Test method for color by the automatic tristimulus spectrophotometer
GOST ISO 4735-2015 Essential oils of citrus. Determination of CD value by ultraviolet spectrometric analysis
GOST 32468-2013 Urea for industrial use. Determination of iron content. Photometric method with use of 2,2'-bipyridyl
GOST 20903-1975 The rectangular fused silica cells for the spectrophotometers. Basic dimensions. Technical requirements
GOST ISO 4407-2006 Industrial cleanliness. Determination of fluid contamination by the counting method using an optical microscope
GOST 33253-2015 Petroleum products. Determination of total sulfur content by gas chromatography method with flame photometric detection

Professional Standard - Military and Civilian Products, How to use a spectrophotometer

WJ 2278-1995 Regulations for verification of interference filters for wavelength verification of spectrophotometers

German Institute for Standardization, How to use a spectrophotometer

DIN 58960-1:1988-05 Photometers for analytical tests; used physical-chemical basic processes
DIN 58960-3:1988-05 Photometers for analytical tests; concepts for characterisation of technical properties for absorption photometers
DIN 58960-3:1988 Photometers for analytical tests; concepts for characterisation of technical properties for absorption photometers
DIN EN ISO 8598-1:2015-01 Optics and optical instruments - Focimeters - Part 1: General purpose instruments (ISO 8598-1:2014); German version EN ISO 8598-1:2014
DIN EN ISO 8254-1:2009-09 Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, TAPPI method (ISO 8254-1:2009); German version EN ISO 8254-1:2009
DIN 5032-8:2017 Photometry - Part 8: Data-sheet for illuminance meters
DIN 5032-8:1986 Photometry; data-sheet for illuminance-meters
DIN EN ISO 7759:2010-12 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010); German version EN ISO 7759:2010
DIN 33899-3:2014-09 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
DIN 58960-2:1997-05 Photometer for analytical tests - Part 2: Technical design; classification, components, concepts
DIN EN ISO 9342-1:2005-08 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2005); German version EN ISO 9342-1:2005 / Note: To be replaced by DIN EN ISO 9342-1 (2022-07).
DIN EN ISO 9342-1:2022-07 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO/DIS 9342-1:2022); German and English version prEN ISO 9342-1:2022 / Note: Date of issue 2022-0...
DIN 58960-4:1991 Photometer for analytical tests; requirements for the description of technical data for the user
DIN 53019-1:2008 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 1: Principles and measuring geometry
DIN EN ISO 9342-2:2006-02 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses (ISO 9342-2:2005); German version EN ISO 9342-2:2005
DIN EN ISO 12625-15:2023-01 Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2022); German version EN ISO 12625-15:2022
DIN 33899-3:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
DIN EN 16584-3:2022 Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics; German and English version prEN 16584-3:2022
DIN EN 16584-3:2017 Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics
DIN EN 16584-3:2017-03 Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics; German version EN 16584-3:2017 / Note: To be replaced by DIN EN 16584-3 (2022-06).
DIN EN 16584-3:2022-06 Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics; German and English version prEN 16584-3:2022 / Note: Date of issue 2022-05-13*Intended as replacement for DIN EN 16584-3 (2017-03).
DIN 58960-4:1991-01 Photometer for analytical tests; requirements for the description of technical data for the user
DIN 58960-1:1988 Photometers for analytical tests; used physical-chemical basic processes
DIN 33899-2:2014-02 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
DIN EN ISO 12625-15:2023 Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2？ (indoor daylight) illuminant (ISO 12625-15:2022)
DIN EN 61755-3-8:2014-06 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface, connectors with 2,5 mm and 1,25 mm diameter cylindrical for 8 degrees angled polished composite ferrule using titanium ...
DIN EN 61755-3-6:2012-10 Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (IEC 61755-3-6:2006 + A1:2012); Ge...
DIN 32877-2:2021 Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 2: Design characteristics and metrological characteristics for backward scattering measuring principles
DIN 32877-2:2021-07 Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 2: Design characteristics and metrological characteristics for backward scattering measuring principles
DIN EN 61755-3-8:2014 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface, connectors with 2,5 mm and 1,25 mm diameter cylindrical for 8 degrees angled polished composite ferrule using titanium as
DIN EN 61755-3-8:2009-09 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding mate...
DIN EN ISO 9342-1:2023-10 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2023); German version EN ISO 9342-1:2023
DIN EN 61755-3-5:2014 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-5: Optical interface connectors with 2,5 mm and 1,25 mm diameter cylindrical non-angled polished composite ferrule using Cu-Ni-alloy as fibre su
DIN EN 61755-3-6:2007 Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (IEC 61755-3-6:2006); German version
DIN EN 62150-4:2010-08 Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a time-domain optical detection system (IEC 62150-4:2009); German version EN 62150-4:2010
DIN EN ISO 12625-7:2021-12 Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2021); German version EN ISO 12625-7:2021
DIN EN ISO 12625-15:2015 Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015); German version EN ISO 12625-15:2015
DIN EN ISO 12625-7:2020 Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10？ (outdoor daylight) (ISO/DIS 12625-7:2020); German and English version prEN ISO 12625-7:2020
DIN 33899-2:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
DIN EN 14784-1:2005-11 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems; German version EN 14784-1:2005

CZ-CSN, How to use a spectrophotometer

CSN 40 4008-1974 Mass determination of radioactive substances by spectrophotometric method
CSN 70 0626 Cast.2-1976 Glass testing. Chemical analysis of glass. Determination of iron(III)-oxide. Photometric method with the use of 1,10-phenanthroline
CSN 70 0641 Cast.3-1976 Chemical análysis of glass. Determinat- ion of alkali metal oxides. Fláme photo- metric method (with the use of synthe- tic solutions)

Illuminating Engineering Society of North America, How to use a spectrophotometer

IESNA LM-78-2007 Method for Total Luminous Flux Measurement of Lamps Using an Integrating Sphere Photometer

Standard Association of Australia （SAA）, How to use a spectrophotometer

AS ISO 8598.1:2017 Optics and optical instruments — Focimeters, Part 1: General purpose instruments
AS 3753:2001 Recommended practice for chemical analysis by ultraviolet/visible spectrophotometry
AS ISO 9342.1:2017 Optics and optical instruments — Test lenses for calibration of focimeters, Part 1: Test lenses for focimeters used for measuring spectacle lenses
AS 2883:2000(R2016) Analysis of metals - Procedures for the setting up, calibration and standardization of atomic emission spectrometers using arc/spark discharge
AS 2883:2000 Analysis of metals - Procedures for the setting up, calibration and standardization of atomic emission spectrometers using arc/spark discharge

British Standards Institution (BSI), How to use a spectrophotometer

20/30394351 DC BS ISO 23946. Fine ceramics (advanced ceramics, advanced technical ceramics). Test methods for optical properties of ceramic phosphors for white light emitting diodes using a Gonio-spectrofluorometer
BS ISO 19043:2015 Natural rubber latex concentrate. Determination of total phosphate content by spectrophotometric method
BS ISO 23946:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test methods for optical properties of ceramic phosphors for white light-emitting diodes using a gonio-spectrofluorometer
BS ISO 17852:2006 Water quality - Determination of mercury - Method using a combined preservation and digestion step followed by atomic fluorescence spectrometry
BS ISO 21501-3:2019 Determination of particle size distribution. Single particle light interaction methods - Light extinction liquid-borne particle counter
BS ISO 21501-2:2019 Determination of particle size distribution. Single particle light interaction methods - Light scattering liquid-borne particle counter
PD CEN/TS 17784-1:2022 Organo-mineral fertilizers. Identification of complexing agents.. Method using UV-Vis spectrophotometry and gravimetry
BS ISO 16740:2005 Workplace air - Determination of hexavalent chromium in airborne particulate matter - Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
22/30406184 DC BS EN ISO 9342-1. Optics and optical instruments. Test lenses for calibration of focimeters - Part 1. Reference lenses for focimeters used for measuring spectacle lenses
22/30440207 DC BS ISO 12625-15. Tissue paper and tissue products - Part 15. Determination of optical properties. Measurement of brightness and colour with C/2° (indoor daylight) illuminant
BS EN ISO 12625-15:2022 Tracked Changes. Tissue paper and tissue products. Part 15. Determination of optical properties. Measurement of brightness and colour with C/2° (indoor daylight) illuminant
BS ISO 21501-4:2018+A1:2023 Determination of particle size distribution. Single particle light interaction methods - Light scattering airborne particle counter for clean spaces
19/30385918 DC BS ISO 21501-3. Determination of particle size distribution. Single particle light interaction methods. Part 3. Light extinction liquid-borne particle counter
BS PD CEN/TR 16013-2:2010 Workplace exposure — Guide for the use of direct-reading instruments for aerosol monitoring Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
19/30385915 DC BS ISO 21501-2. Determination of particle size distribution. Single particle light interaction methods. Part 2. Light scattering liquid-borne particle counter
BS 7334-6:1992 Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
BS PD ISO/TS 18621-21:2020 Graphic technology. Image quality evaluation methods for printed matter. Measurement of 1D distortions of macroscopic uniformity utilizing scanning spectrophotometers
PD ISO/TS 18621-21:2023 Graphic technology. Image quality evaluation methods for printed matter. Measurement of 1D distortions of macroscopic uniformity utilizing scanning spectrophotometers
21/30419440 DC BS ISO 21501-4 AMD1. Determination of particle size distribution. Single particle light interaction methods. Part 4. Light scattering airborne particle counter for clean spaces
20/30408946 DC BS EN ISO 12625-7. Tissue paper and tissue products. Part 7. Determination of optical properties. Measurement of brightness and colour with D65/10° (outdoor daylight)
BS ISO 16264:2002 Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
BS EN ISO 16264:2002 Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
22/30415131 DC BS EN 16584-3. Railway applications. Design for PRM use. General requirements - Part 3. Optical and friction characteristics

Korean Agency for Technology and Standards (KATS), How to use a spectrophotometer

KS D ISO 14707:2003 Surface chemical analysis-Glow discharge optical emission spectrometry (GD-OES)-Introduction to use
KS X ISO 14981-2003(2008) Graphic technology－Process control－Optical, geometrical and metrological requirements for reflection densitometers for graphic arts use
KS M ISO 6685:2004 Chemical products for industrial use－General method for determination of iron content－1, 10－Phenanthroline spectrophotometric method
KS I ISO 16264:2008 Water quality-Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection

Danish Standards Foundation, How to use a spectrophotometer

DS/EN ISO 8254-1:2009 Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, TAPPI method
DS/EN ISO 8254-2:2003 Paper and board - Measurement of specular gloss - Part 2: 75 gloss with a parallel beam, DIN method
DS/EN ISO 6271-2:2005 Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 2: Spectrophotometric method
DS/EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
DS/EN ISO 4630-2:2005 Clear liquids - Estimation of colour by the Gardner colour scale - Part 2: Spectrophotometric method
DS/EN ISO 9342-1:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses
DS/EN ISO 9342-2:2006 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses
DS/CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
DS/CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
DS/ISO 21501-4:2007 Determination of particle size distribution - Single particle light interaction methods - Part 4: Light scattering airborne particle counter for clean spaces
DS/IEC/TR 61282-10:2013 Fibre optic communication system design guides - Part 10: Characterization of the quality of optical vector-modulated signals with the error vector magnitude
DS/EN 61755-3-6:2007 Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
DS/EN 61755-3-6/A1:2012 Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
DS/EN 62150-4:2010 Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a time-domain optical detection system
DS/EN 61755-3-8:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding materia

YU-JUS, How to use a spectrophotometer

JUS E.B8.035-1987 Durum wheat for milling industry, Estimation of yellowpigment. Spectrophotometric method

RO-ASRO, How to use a spectrophotometer

STAS SR 9763-13-1996 Spices and condiments. Determination of nitrogen content by the Kjeldahl method. Spectrophotometric method
STAS SR ISO 8322-5:1995 Building construction - Measuring instrumenta- Procedues for determining accuracy in use. Part 5: Optical plumbing instruments
STAS SR ISO 8322-3:1995 Building construction - Measuring instruments- Procedures for determining accuracy in use. Part 3: Optical levelling instruments

International Organization for Standardization (ISO), How to use a spectrophotometer

ISO 19043:2015 Natural rubber latex concentrate - Determination of total phosphate content by spectrophotometric method
ISO 14981:2000 Graphic technology - Process control - Optical, geometrical and metrological requirements for reflection densitometers for graphic arts use
ISO/FDIS 9342-1 Optics and optical instruments — Test lenses for calibration of focimeters — Part 1: Reference lenses for focimeters used for measuring spectacle lenses
ISO 9342-1:2023 Optics and optical instruments — Test lenses for calibration of focimeters — Part 1: Reference lenses for focimeters used for measuring spectacle lenses
ISO 23946:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test methods for optical properties of ceramic phosphors for white light-emitting diodes using a gonio-spectrofluorometer
ISO 21501-3:2019 Determination of particle size distribution — Single particle light interaction methods — Part 3: Light extinction liquid-borne particle counter
ISO/DIS 2884-1:2023 Paints and varnishes — Determination of viscosity using rotational viscometers — Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates
ISO 21501-2:2019 Determination of particle size distribution — Single particle light interaction methods — Part 2: Light scattering liquid-borne particle counter
ISO/TS 18621-21:2020 Graphic technology - Image quality evaluation methods for printed matter - Part 21: Measurement of 1D distortions of macroscopic uniformity utilizing scanning spectrophotometers
ISO/TS 18621-21:2023 Graphic technology — Image quality evaluation methods for printed matter — Part 21: Measurement of 1D distortions of macroscopic uniformity utilizing scanning spectrophotometers
ISO 20903:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
ISO 8322-6:1991 Building construction; measuring instruments; procedures for determining accuracy in use; part 6: laser instruments
ISO 8322-3:1989 Building construction; measuring instruments; procedures for determining accuracy in use; part 3: optical levelling instruments
ISO 8322-5:1991 Building construction; measuring instruments; procedures for determining accuracy in use; part 5: optical plumbing instruments
ISO 16264:2002 Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
ISO 12740:1998 Lead sulfide concentrates - Determination of silver and gold contents - Fire assay and flame atomic absorption spectrometric method using scorification or cupellation
ISO 9337-1:1999 Contact lenses - Determination of back vertex power - Part 1: Method using focimeter with manual focusing

National Metrological Verification Regulations of the People's Republic of China, How to use a spectrophotometer

JJG 955-2000 Verification Regulation of Special Analysis Microdensitimeters

Japanese Industrial Standards Committee (JISC), How to use a spectrophotometer

JIS C 1609-1:2006 Illuminance meters Part 1: General measuring instruments
JIS B 9623:2002 Graphic technology -- Process control -- Optical, geometrical and metrological requirements for reflection densitometers for graphic arts use
JIS C 1609-2:2008 Illuminance meters -- Part 2: Measuring instruments used in transaction or certification
JIS K 7242-2:2008 Plastic -- Smoke generation -- Part 2 : Determination of optical density by a single-chamber test
JIS K 7242-2:2015 Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test
JIS K 0400-43-60:2000 Water quality -- Determination of nitrate -- Part 3: Spectrometric method using sulfosalicylic acid

Lithuanian Standards Office , How to use a spectrophotometer

LST EN ISO 8254-1:2009 Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, TAPPI method (ISO 8254-1:2009)
LST EN ISO 7759:2011 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010)
LST EN ISO 8254-2:2003 Paper and board - Measurement of specular gloss - Part 2: 75° gloss with a parallel beam, DIN method (ISO 8254-2:2003)
LST EN ISO 9342-1:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2005)
LST EN ISO 9342-2:2006 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses (ISO 9342-2:2005)
LST EN ISO 14719:2012 Chemical analysis of refractory material glass and glazes - Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline (ISO 14719:2011)
LST EN 61755-3-8-2009 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding materia
LST EN 61755-3-6-2007 Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (IEC 61755-3-6:2006)
LST EN 61755-3-6-2007/A1-2012 Fibre optic connector optical interfaces -- Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (IEC 61755-3-6:2006/A1:2012)
LST EN 62150-4-2010 Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a time-domain optical detection system (IEC 62150-4:2009)

AENOR, How to use a spectrophotometer

UNE-EN ISO 8254-1:2009 Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, TAPPI method (ISO 8254-1:2009)
UNE-EN ISO 7759:2011 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010)
UNE-EN ISO 8598-1:2015 Optics and optical instruments - Focimeters - Part 1: General purpose instruments. (ISO 8598-1:2014)
UNE 82302:1992 CLASSIFICATION OF INSTRUMENTS AND DEVICES FOR MEASUREMENT AND EVALUATION OF THE GEOMETRICAL PARAMETERS OF SURFACE FINISH.
UNE-EN ISO 9342-1:2006 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2005)
UNE-EN ISO 9342-2:2007 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses (ISO 9342-2:2005)
UNE-EN ISO 12625-7:2015 Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014)
UNE-EN 14784-1:2006 Non-destructive testing - Industrial computed radiography with phosphor imaging plates - Part 1: Classification of systems

Professional Standard - Agriculture, How to use a spectrophotometer

NY/T 1373-2007 Determination of Sulfite in Edible Fungus Distill under Nitrogen with the Method of Spectrophotometer

KR-KS, How to use a spectrophotometer

KS I ISO 11348-2-2009 Water quality－Determination of the inhibitory effect of water samples on the light emission of vibrio fischeri(Luminescent bacteria test)－Part 2：method using liquid-dried bacteria

IEC - International Electrotechnical Commission, How to use a spectrophotometer

TS 62129-3-2014 Calibration of wavelength/optical frequency measurement instruments - Part 3: Optical frequency meters using optical frequency combs (Edition 1.0)

Professional Standard - Energy, How to use a spectrophotometer

NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)

国家能源局, How to use a spectrophotometer

SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)

International Electrotechnical Commission (IEC), How to use a spectrophotometer

IEC 86/461/DTS:2013 IEC/TS 62129-3, Ed. 1: Calibration of wavelength/optical frequency measurement instruments - Part 3: Optical frequency meters using optical frequency combs
IEC TS 62129-3:2014 IEC/TS 62129-3, Ed. 1: Calibration of wavelength/optical frequency measurement instruments - Part 3: Optical frequency meters using optical frequency combs
IEC 61755-3-6:2006+AMD1:2012 CSV Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material,
IEC 61755-3-6:2006/AMD1:2012 Amendment 1 - Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surround

European Committee for Standardization (CEN), How to use a spectrophotometer

CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
PD CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
FprCEN/TS 17784-1-2021 Organo-mineral fertilizers - Identification of complexing agents - Part 1: Method using UV-Vis spectrophotometry and gravimetry
FprEN ISO 9342-1 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO/FDIS 9342-1:2023)
EN ISO 9342-1:2023 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2023)
CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
PD CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
EN 13363-1:2003 Solar protection devices combined with glazing - Calculation of solar and light transmittance - Part 1: Simplified method (Incorporates Amendment A1: 2007; Incorporating corrigendum December 2008)
EN ISO 9337-1:2000 Contact Lenses - Determination of Back Vertex Power - Part 1: Method Using Focimeter with Manual Focusing ISO 9337-1:1999

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to use a spectrophotometer

GB/T 23649-2009 Graphic technology.Process control.Optical,geometrical and metrological requirements for reflection densitometers for graphic arts use

未注明发布机构, How to use a spectrophotometer

BS EN ISO 9342-1:2023 Optics and optical instruments — Test lenses for calibration of focimeters Part 1 : Reference lenses for focimeters used for measuring spectacle lenses
BS EN 187200:2001 Harmonized systems of quality assessment for electronic components — Sectional specification — Optical cables to be used along electrical power lines (OCEPL)

BE-NBN, How to use a spectrophotometer

NBN T 03-439-1983 Aluminium fluoride for industrial use - Determination of silica content -Spectrophotometric method using the reduced silicomolybdic complex
NBN-ISO 8322-6:1992 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 6 : Laser instruments
NBN-ISO 8322-3:1992 Building construction - Measuring instruments - Procedures for determining accuracy in use -Part 3 : Optical levelling instruments
NBN-ISO 8322-5:1992 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 5 : Optical plumbing instruments

ES-UNE, How to use a spectrophotometer

UNE-EN ISO 14719:2011 Chemical analysis of refractory material glass and glazes - Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline (ISO 14719:2011) (Endorsed by AENOR in January of 2012.)
UNE-EN ISO 12625-15:2023 Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2022)
UNE-EN 16584-3:2019 Railway Applications - Design for PRM Use - General Requirements - Part 3: Optical and Friction Characteristics
UNE-CEN/TS 17784-1:2022 Organo-mineral fertilizers - Identification of complexing agents - Part 1: Method using UV-Vis spectrophotometry and gravimetry (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-EN 61755-3-6:2006 Fibre optic connector optical interfaces -- Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (IEC 61775-3-6:2006). (Endorsed b...
UNE-EN 61755-3-6:2006/A1:2012 Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (Endorsed by AENOR in July of 2012.)
UNE-EN ISO 12625-7:2022 Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2021)
UNE-EN 61755-3-8:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces -- Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding mat...
UNE-EN 3745-306:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling (Endorsed by AENOR in March of 2006.)
UNE-EN 62150-4:2010 Fibre optic active components and devices - Basic test and measurement procedures -- Part 4: Relative intensity noise using a time-domain optical detection system (Endorsed by AENOR in May of 2010.)
UNE-EN 61300-3-47:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-47: Examinations and measurements - End face geometry of PC/APC spherically polished ferrules using interferometry (Endorsed by AENOR in Novembe...

American National Standards Institute （ANSI), How to use a spectrophotometer

ANSI/TAPPI T271 om-2012 Fiber length of pulp and paper by automated optical analyzer using polarized light
ANSI N42.14-1999 Calibration and Use of Germanium Spectrometers for the Measurement of Gamma-Ray Emission Rates of Radionuclides

Taiwan Provincial Standard of the People's Republic of China, How to use a spectrophotometer

CNS 6195-1980 Method of Test for Iron Content of Paraformaldehyde for Industrial Use(2,2'}tyBipyridyl Photometric Method)
CNS 6215-1980 Method of Test for Iron Content of Maleic Anhydride for Industrial Use(2,2'-Bipyridyl Photometric Method)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, How to use a spectrophotometer

PREN 3745-502-1998 Aerospace Series Fibres and Cables@ Optical@ Aircraft Use Test Methods Part 502: Tensile Strength for Short Length of Optical Fibres (Edition P 1)
PREN 3745-305-1997 Aerospace Series Fibres and Cables@ Optical@ Aircraft Use Test Methods Part 305: Immunity to Ambient Light Coupling (Edition P 1)
PREN 3745-402-1997 Aerospace Series Fibres and Cables@ Optical@ Aircraft Use Test Methods Part 402: Temperature Cycling (Edition P 1)
PREN 3745-705-2006 Aerospace series Fibres and cables@ optical@ aircraft use Test methods Part 705: Contrast measurement (Edition P 1)
PREN 3745-601-2006 Aerospace series Fibres and cables@ optical@ aircraft use Test methods Part 601: Smoke density (Edition P 1)
PREN 3745-505-2006 Aerospace series Fibres and cables@ optical@ aircraft use Test methods Part 505: Cable tensile strength (Edition P 1)
PREN 3745-505-2016 Aerospace series Fibres and cables@ optical@ aircraft use Test methods Part 505: Cable tensile strength (Edition P 2)
PREN 3745-306-1999 Aerospace Series Fibres and Cables@ Optical@ Aircraft Use Test Methods Part 306: Variation of Attenuation During Temperature Cycling (Edition P 2)
PREN 3745-306-1998 Aerospace Series Fibres and Cables@ Optical@ Aircraft Use Test Methods Part 306: Variation of Attenuation During Temperature Cycling (Edition P 1)

U.S. Military Regulations and Norms, How to use a spectrophotometer

ARMY MIL-STD-191 A-1956 METHOD AND PROCEDURE FOR OVERALL CALIBRATION OF ILLUMINOMETER FOR USE IN ACCEPTANCE TESTING OF PYROTECHNIC ILLUMINANTS

Institute of Environmental Sciences and Technology, How to use a spectrophotometer

IEST RP-CC042.1-2011 Sizing and Counting of Submicrometer Liquid-borne Particles Using Optical Discrete-particle Counters

PL-PKN, How to use a spectrophotometer

PN Z04015-09-1990 Air purity protection Tests for sulphur and its compounds Determination of carbon disulphide vapours in work places usjng spectrophotometric analyzer
PN-EN 62788-1-4-2017-02/A1-2021-07 E Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength

CEN - European Committee for Standardization, How to use a spectrophotometer

EN 16584-3:2017 Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., How to use a spectrophotometer

ASHRAE LV-11-C074-2011 Energy Use Intensity and Its Influence on the Integrated Daylighting Design of a Large Net Zero Energy Office Building

TR-TSE, How to use a spectrophotometer

TS 751-1969 CHEMICAL ANALYSIS OF MAGNESIUM AND ITS ALLOYS PHOTOMETRIC DETERMINATION OF IRON (Orthophenanthroline mcthod applicable to iron Content between 0,002 and 0,05 %)

European Committee for Electrotechnical Standardization（CENELEC）, How to use a spectrophotometer

EN 62788-1-4:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
EN 61755-3-6:2006 Fibre optic connector optical interfaces Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (Incorporates Amendment A1: 2012)
EN 62150-4:2010 Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a time-domain optical detection system
EN 61300-3-47:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-47: Examinations and measurements - End face geometry of PC/APC spherically polished ferrules using interferometry

US-CFR-file, How to use a spectrophotometer

CFR 40-86.1864-10-2014 Protection of Environment. Part86:Control of emissions from new and in-use highway vehicles and engines. Section86.1864-10:How to comply with the fleet average cold temperature NMHC standards.

Aerospace, Security and Defence Industries Association of Europe (ASD), How to use a spectrophotometer

ASD-STAN PREN 3745-505-2016 Aerospace series Fibres and cables@ optical@ aircraft use Test methods Part 505: Cable tensile strength (Edition P 2)

PT-IPQ, How to use a spectrophotometer

NP EN 12373-13-2001 Aluminium and aluminium alloys Anodizing Part 13:Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abriged goniophotometer

CH-SNV, How to use a spectrophotometer

SN EN ISO 12625-7:2021 Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2021)

(U.S.) Ford Automotive Standards, How to use a spectrophotometer

FORD ESB-M16J14-A2-2012 EMAMEL, THERMOSET 2-COMPONENT COLOR COAT, EXTERIOR, HIGH GLOSS, POLISH RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESB-M16J14-A)

CENELEC - European Committee for Electrotechnical Standardization, How to use a spectrophotometer

EN 61755-3-8:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface@ 2@5 mm and 1@25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding materia

IN-BIS, How to use a spectrophotometer

IS 233 Pt.6-1978

Institute of Electrical and Electronics Engineers (IEEE), How to use a spectrophotometer

IEEE N42.14-1999(R2004) American National Standard for Calibration and Use of Germanium Spectrometers for the Measurement of Gamma-Ray Emission Rates of Radionuclides