ZH
RU
ES

Non-isothermal dsc test method

Non-isothermal dsc test method, Total:113 items.

In the international standard classification, Non-isothermal dsc test method involves: Veterinary medicine, Waxes, bituminous materials and other petroleum products, Construction materials, Measurement of volume, mass, density, viscosity, Rubber and plastics products, Materials for aerospace construction, Products of the textile industry, Insulating fluids, Coals, Chipless working equipment, Non-ferrous metals, Testing of metals, Thermodynamics and temperature measurements, Fasteners for aerospace construction, Petroleum products in general, Protection against dangerous goods, Wind turbine systems and other alternative sources of energy, Fuels, Corrosion of metals, Plastics, Lubricants, industrial oils and related products, Pipeline components and pipelines, Analytical chemistry, Ceramics, Paint ingredients, Air quality, Electrical wires and cables, Insulating materials, External sewage systems, Non-destructive testing.

Liaoning Provincial Standard of the People's Republic of China, Non-isothermal dsc test method

DB21/T 3256-2020 Rapid detection method for isothermal amplification of African swine fever virus

American Society for Testing and Materials (ASTM), Non-isothermal dsc test method

ASTM D4419-90(2005) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D4419-90(2000) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D4419-90(1995)e1 Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D4419-90(2015) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D4419-90(2021) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM E2509-08 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
ASTM D8363-20 Standard Test Method for Rubber—Stress Relaxation in Tension Under Non-Isothermal Conditions
ASTM F3418-20 Standard Test Method for Measurement of Transition Temperatures of Slack Waxes used in Equine Sports Surfaces by Differential Scanning Calorimetry (DSC)
ASTM E2070-13(2018) Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM E2070-23 Standard Test Methods for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM D2879-83 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-86 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-18 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM E2070-03 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM E2070-00 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM D6793-02 Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
ASTM D6793-02(2012) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
ASTM D6793-02(2007) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
ASTM E2070-13 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM D4222-03 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts By Static Volumetric Measurements
ASTM D4222-98 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts By Static Volumetric Measurements
ASTM D5735-95 Standard Test Method for Tearing Strength on Nonwoven Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM C1702-15a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1897-20 Standard Test Methods for Measuring the Reactivity of Supplementary Cementitious Materials by Isothermal Calorimetry and Bound Water Measurements
ASTM C1702-23 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM D7426-08(2013) Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound
ASTM D7426-08 Standard Test Method for Assignment of the DSC Procedure for Determining T_g of a Polymer or an Elastomeric Compound
ASTM C1702-09 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-15 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-15b Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM D7097-06a Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test-TEOST MHT
ASTM D7097-06 Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test-TEOST MHT
ASTM D7361-07(2012) Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM C1702-13a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM D4222-03(2008) Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM C1702-09a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-17 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1499-15 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1702-13 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-14 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM D1204-02 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D1204-94e1 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D4222-03(2015)e1 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM D7169-20 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM D7169-18 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM D7169-19 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM D716-86(1999) Standard Test Methods for Evaluating Mica Pigment
ASTM D716-86(2003) Standard Test Methods for Evaluating Mica Pigment
ASTM D7169-16 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM D7169-20e1 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM D4222-20 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM D5953M-96 Standard Test Method for Determination of Non-Methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection Method (Metric)
ASTM D5953M-96(2009) Standard Test Method for Determination of Non-Methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection Method (Metric)
ASTM D5953M-16 Standard Test Method for Determination of Non-methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection
ASTM D5953M-96(2001) Standard Test Method for Determination of Non-Methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection Method (Metric)
ASTM D5953M-23 Standard Test Method for Determination of Non-methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection
ASTM D7169-23 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography

European Committee for Standardization (CEN), Non-isothermal dsc test method

EN 23016:1991 Test Methods for the Flame Resistance Rating of Non-Metallic Materials

British Standards Institution (BSI), Non-isothermal dsc test method

BS EN 196-11:2018 Methods of testing cement - Heat of hydration. Isothermal Conduction Calorimetry method
PD IEC/TR 61946:2007 Mineral insulating oils. Characterization of paraffinic /naphthenic nature. Low temperature differential scanning calorimetry (DSC) test method
BS EN 6041:2018 Aerospace series. Non-metallic materials. Test method. Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
BS 2A 295:2000 Nuts, self-locking, with maximum operating temperature less than or equal to 425°C. Test methods
BS ISO 21608:2012 Corrosion of metals and alloys. Test method for isothermalexposure oxidation testing under high-temperature corrosion conditions for metallic materials
23/30446465 DC BS ISO 7481. Aerospace. Nuts, self-locking, with maximum operating temperature less than or equal to 425 °C. Test methods
BS 1902 Sec.5.2:1983 Methods of testing refractory materials. Refractory and thermal properties. Determination of pyrometric cone equivalent (refractoriness) (method 1902-502)
BS EN ISO 13260:2011 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading
BS EN ISO 13260:2011+A1:2017 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Non-isothermal dsc test method

PREN 6041-1995 Aerospace Series Non-Metallic Materials Test Method Analysis of Non-Metallic Materials (Uncured) by Differential Scanning Calorimetry (DSC) (Edition P1)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Non-isothermal dsc test method

ASHRAE 164.3-2015 Method of Test for Commercial and Industrial Isothermal Humidifiers
ASHRAE 102-1983 Methods of Testing Nonelectric Nonpneumatic Thermostatic Radiator Valves; (Reaffirmation of ANSI/ASHRAE 102-1983 with Minor Editorial Revisions) (R 1989)

ES-UNE, Non-isothermal dsc test method

UNE-EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC) (Endorsed by Asociación Española de Normalización in March of 2018.)
UNE-EN 196-11:2019 Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method
UNE-EN ISO 13257:2020 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)

Professional Standard - Textile, Non-isothermal dsc test method

FZ/T 10015-2011 Testing method for polyacrylic sizes used in textile warp sizing.Determination of glass transition temperature.Differential scanning calorimetry(DSC)

AENOR, Non-isothermal dsc test method

UNE-EN 2310:1993 AEROSPACE SERIES. TEST METHODS FOR THE FLAME RESISTANCE RATING OF NON-METALLIC MATERIALS.
UNE 28581:1986 AEROSPACE. FASTENERS. SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERTURE LESS THAN OR EQUAL TO 425oC. TEST METHODS.
UNE-EN 60811-512:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature

International Electrotechnical Commission (IEC), Non-isothermal dsc test method

IEC TR 61946:2007 Mineral insulating oils - Characterization of paraffinic/naphthenic nature - Low temperature differential scanning calometry (DSC) test method

Association Francaise de Normalisation, Non-isothermal dsc test method

NF EN 196-11:2018 Méthodes d'essais des ciments - Partie 11 : chaleur d'hydratation - Méthode par calorimétrie à conduction isotherme
NF P15-471-11*NF EN 196-11:2018 Methods of testing cement - Part 11 : heat of hydration - Isothermal Conduction Calorimetry method

Professional Standard - Coal, Non-isothermal dsc test method

MT/T 1157-2011 Determination of Equilibrium Miosture in coal Isotherm Adsorption Method

IN-BIS, Non-isothermal dsc test method

IS 1207-1978

Group Standards of the People's Republic of China, Non-isothermal dsc test method

T/SZMES 2-2020 Energy consumption test and rating method of mold temperature control system for die casting

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Non-isothermal dsc test method

GB/T 29918-2023 Test method for pressure-composition isotherm (PCI) of rare earth hydrogen storage alloys
GB/T 29918-2013 Method for measuring pressure-composition isotherms of RE-base AB<下标5> hydrogen storage alloys

American National Standards Institute （ANSI), Non-isothermal dsc test method

ANSI/ASTM E208:1995 Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Non-isothermal dsc test method

GB/T 33291-2016 Measurement method of pressure-composition-temperature for reversable hydrogen asborption & desorption of hydrides

Professional Standard - Aerospace, Non-isothermal dsc test method

QJ 967-1986 Test method for medium-temperature steady-state heat transfer characteristics of rigid non-metallic insulation materials
QJ 966-1986 Test method for low-temperature steady-state heat transfer characteristics of rigid non-metallic insulation materials

German Institute for Standardization, Non-isothermal dsc test method

DIN EN ISO 13257:2019-04 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018); German version EN ISO 13257:2018
DIN EN ISO 13257:2019 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)
DIN EN ISO 13257:2018 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2010)
DIN 51900-2:2003-05 Testing of solid and liquid fuels - Determination of the gross calorific value by the bomb calorimeter and calculation of the net calorific value - Part 2: Method using isoperibol ot static, jacket calorimeter / Note: To be replaced by DIN 51900 (2022-...
DIN EN ISO 13260:2018-01 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading (ISO 13260:2010 + Amd.1:2017); German version EN ISO 13260:2011 + A1:2017

International Organization for Standardization (ISO), Non-isothermal dsc test method

ISO 21608:2012 Corrosion of metals and alloys - Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials
ISO 13257:2018 Thermoplastics piping systems for non-pressure applications — Test method for resistance to elevated temperature cycling

YU-JUS, Non-isothermal dsc test method

JUS N.A5.710-1981 Basic environmental testing procedures.Test Ba:Dry heat for non heat-dissipating specimen with sudden change of temprerature

Korean Agency for Technology and Standards (KATS), Non-isothermal dsc test method

KS C IEC 60811-504-2014(2019) Electric and optical fibre cables — Test methods for non-metallic materials — Part 504: Mechanical tests — Bending tests at low temperature for insulation and sheaths
KS C IEC 60811-506-2015(2020) Electric and optical fibre cables — Test methods for non-metallic materials — Part 506: Mechanical tests — Impact test at low temperature for insulations and sheaths
KS C IEC 60811-508:2020 Electric and optical fibre cables — Test methods for non-metallic materials — Part 508: Mechanical tests — Pressure test at high temperature for insulation and sheaths
KS C IEC 60811-505-2014(2019) Electric and optical fibre cables — Test methods for non-metallic materials — Part 505: Mechanical tests — Elongation at low temperature for insulations and sheaths

GOSTR, Non-isothermal dsc test method

GOST R 57632-2017 Non-woven textiles heets for protective clothing. Warm textiles. Technical requirements. Methods of testing

KR-KS, Non-isothermal dsc test method

KS C IEC 60811-508-2020 Electric and optical fibre cables — Test methods for non-metallic materials — Part 508: Mechanical tests — Pressure test at high temperature for insulation and sheaths

SE-SIS, Non-isothermal dsc test method

SIS SS-ISO 7481:1985 Aerospace - Fasteners - Self-locking nuts with maximum operating tern pera- ture less than or equal to 425 °C - Test methods

未注明发布机构, Non-isothermal dsc test method

BS 7935-1:2004(2010) Constant amplitude dynamic force calibration — Part 1 : Calibration and verification of non - resonant uniaxial dynamic testing systems — Method
BS 7935-2:2004(2010) Constant amplitude force calibration — Part 2 : Calibration of the calibration device instrumentation to be used for the dynamic calibration of non - resonant uniaxial dynamic testing systems — Method

Lithuanian Standards Office , Non-isothermal dsc test method

LST EN 60811-411-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds (IEC 60811-411:2012)

ES-AENOR, Non-isothermal dsc test method

UNE 53-310-1987

AT-ON, Non-isothermal dsc test method

ONORM EN 580-1993 Plastics piping Systems- Unplasticized poly (vinyl Chloride) (PVC-U) pipes - Test method for the resistance to dichlormethane at a specified temperature (DCMT)

Danish Standards Foundation, Non-isothermal dsc test method

DS/EN 60811-512:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature

CENELEC - European Committee for Electrotechnical Standardization, Non-isothermal dsc test method

EN 60811-512:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature

RU-GOST R, Non-isothermal dsc test method

GOST R 51751-2001 Non-destructive testing. Non-destructive testing for evaluation of critical high-loaded elements when exposed to significant temperature and forces. General requirements for guidance of the selection of methods